Answer:
Scalar quantity is the distance travelled i.e 450 meters
Explanation:
The scalar component of displacement is the distance travelled which is 450 meters.
The vector component is basically the direction of the displacement vector.
Hence, scalar quantity is the distance travelled i.e 450 meters
what are the properties of solids
With the frequency set at the mid-point of the slider and the amplitude set at the mid-point of the slider, approximately how many grid marks is the wavelength of the wave (use the pause button and step button as you need to in order to get a good measure, and round to the nearest whole grid mark)?
If the amplitude is increased the wavelength:___________.
a. decreases
b. stays the same
c. increases
Answer:
correct answer is b
Explanation:
The frequency of a wave depends on the properties of medium density and the elasticity properties change the amplitude depends on the energy carried by the wave, that is, the amplitude is proportional to the height of the wave (oscillation).
Consequently the amplitude of independent of the frequency because it depends on different factors.
Therefore when changing the amplitude the wavelength remains constant
the correct answer is b
Adverb of place:
1
Adverb of time:
2
Adverb of place:
3
Adverb of time:
4
Adverb of place:
5
Answer:
1 there,here, somewhere,nowhere,everywhere
2.now,yesterday,then,
g A 50 kg box is resting on a horizontal surface. Results for item 1. 1 1 / 1 point Determine the weight of the box in [N]. Correct answer: 490 Results for item 2. 2 1 / 1 point Determine the magnitude of the normal force acting on the box in [N]. Correct answer: 490 Results for item 3. 3 0 / 1 point Find the magnitude of the upward applied force, in [N], necessary to lift the box with an acceleration of 1 m/s2
Answer:
(a) 490 N
(b) 490 N
(c) 540 N
Explanation:
mass, m = 50 kg
acceleration, a = 1 m/s2
(a) The weight is given by
W = m g = 50 x 9.8 = 490 N
(b) The normal force is
N = m g = 490 N
(c) Let the force required is F.
Use Newton's second law
F - m g = m a
F = m(g + a)
F = 50(9.8 + 1)
F = 540 N
Subtract the following numbers, using scientific notation and the correct number of significant digits.
6.94 × 103 mm - 4.5 × 102 mm = _____.
2.4 × 103 mm
2.44 × 102mm
6.49 × 103 mm
6.5 × 103 mm
Answer:
The correct answer is - 6.49 × 10^3 mm.
Explanation:
The correct scientific notation of the given subtraction problem is:
6.94 × 10^3 mm - 4.5 × 10^2 mm = _____.
The correct number of significant digits is
a. 6.94 × 10^3 mm = 3
b. 4.5 × 10^2 mm = 2
So subtracting the 6.94 × 10^3 mm - 4.5 × 10^2 mm
= 6940 - 450
= 6.49× 10^3 mm.
Answer:
6.5x 10^3 mm
Explanation:
Which element is the biggest contributor to Climate Change?
Answer:
carbon dioxide (CO2)
Explanation:
the burning or combustion of these fossil fuels creates gases that are released into the atmosphere. Of these gases, carbon dioxide (CO2) is the most common and is the gas most responsible for exacerbating the green- house effect that is changing global climate patterns.
We could, in theory, make all of our industrial processes sustainable if we could ________.
a. speed up the disposal of wastes by deep-well injection
b. develop more draconian policies to regulate manufacturing
c. reduce the use of biodegradable plastics
d. transform cyclic processes into linear ones
e. transform linear processes into circular ones
Answer:
transform linear processes into circular ones.
a typical cmall flashlight contains two batteries each having na emf of 2.0 v connected in series with a bulb havin ga resistance of 16 ohms if the internal resistance of the batteries is negligible what power is delivered to the ublb
Answer:
P = 0.25 W
Explanation:
Given that,
The emf of the battry, E = 2 V
The resistance of a bulb, R = 16 ohms
We need to find the power delivered to the bulb. We know that, the formula for the power delivered is given by :
[tex]P=\dfrac{V^2}{R}\\\\P=\dfrac{2^2}{16}\\\\=0.25\ W[/tex]
So, 0.25 W power is delivered to the bulb.
What is the average speed (in km/h) of Zhana, who runs to the store that is 4.0 km away in 30.0 minutes?
0.13 km/ h
8.0 km/h
2.0 km/h
Answer:
2.0km/h.
Explanation:
iiiiijjjjjij
4.Upthrust doesnt depend on the following Physical quantity?
volume of body
density of body
mass of body
acceleration due to gravity
Answer:
C: Mass of body
Explanation:
Upthrust is defined as the upward force that a liquid will exert on a body floating atop it.
Now, Formula for upthrust is;
Upthrust = density of liquid × volume of the body × acceleration due to gravity.
From the formula, we can see that upthrust depends on density, volume and acceleration due to gravity.
Thus, looking at the options, the one that doesn't apply is mass of body.
An electric eel develops a potential difference of 470 V , driving a current of 0.85 A for a 1.0 ms pulse. Part A Find the power of this pulse.
Answer:
399.5 Watts.
Explanation:
From the question given above, the following data were obtained:
Potential difference (V) = 470 V
Current (I) = 0.85 A
Time (t) = 1 ms
Power (P) =?
Electrical power is defined by the following equation:
Power (P) = potential difference (V) × current (I)
P = IV
Using the above formula, the power can be obtained as follow:
Potential difference (V) = 470 V
Current (I) = 0.85 A
Power (P) =?
P = IV
P = 470 × 0.85
P = 399.5 Watts
Therefore, the power is 399.5 Watts.
A football player collides with another player. The force of the collision is
1000 kg•m/s. The collision lasts 1 second. What is the impulse?
Answer:
Impulse = 1000 Ns
Explanation:
Given the following data;
Force of collision = 1000 kg•m/s.
Time = 1 seconds
To find the impulse;
Mathematically, the impulse experienced by an object or body is given by the formula;
Impulse = force * time
Substituting into the formula, we have;
Impulse = 1000 * 1
Impulse = 1000 Ns
What is the gain in gravitational potential energy of a body of weight 2000N as it rises from a height of 20m to a height of 25 m above the Earth's surface
Answer:
Explanation:
GPE =weight * height
= 2000*(25-20)
= 10000 J
Gain of Gravitation Potential energy = 10,000 J
What is Gravitation Potential Energy ?
It is the energy acquired by an object due to a change in its position when it is present in a gravitational field .
To calculate gravitational potential energy at height h , formula used is = m g h where m = mass of the body
g = acceleration due to gravity
h = height from the ground
Gain of Gravitation Potential energy = mg(h2 - h1 ) h2 = final height
h1 = initial height
= 2000 (25 -20) (since , mg =weight)
Gain of Gravitation Potential energy = 10,000 J
Learn more about Gravitation Potential energy :
https://brainly.com/question/3884855?referrer=searchResults
#SPJ2
An astronaut weighing 248 lbs on Earth is on a mission to the Moon and Mars. (a) What would he weigh in newtons when he is on the Moon
Answer:
[tex]W_m=183.495N[/tex]
Explanation:
From the question we are told that:
Weight [tex]W=248Ibs[/tex]
Mass of Weight [tex]m= 248*0.453[/tex]
[tex]m=112.344kg[/tex]
Generally the acceleration due to gravity on the Moon is one-sixth that on Earth.
Therefore
The equation for Weight on Moon is given as
[tex]W_m=m*g/6[/tex]
[tex]W_m=122.344*\frac{9.8}{6}[/tex]
[tex]W_m=183.495N[/tex]
Answer:
F ’= 40.9 lb
Explanation:
The weight of a body is the attraction of the Earth on the body
F = [tex]G \frac{m M_e}{R_e^2}[/tex]
F = mg
m = F / g
m = 248/32
m = 7.75 slug
The weight of the body on the moon is the attraction of the body for the satellite
F ’= [tex]G \frac{mM}{R^2}[/tex]
from the tables the mass and radius of the moon are M = 7.34 10²² kg and R = 1.74 10⁶ m
let's reduce the mass to the SI system
m = 7.75 slug (14.59 kg / 1 slug) = 113 kg
F ’= 6.67 10⁻¹¹ 113 7.34 10²² / (1.74 10⁶) ²
F ’= 1.82 10² N
F ’= 1.82 10² N (0.2248 lb / 1 N)
F ’= 40.9 lb
Calculate the pressure exerted on the floor when an
elephant who weighs 2400N stands on one foot which has
an area of 4m²?
P = F / A
P = 2400 / 4
P = 24 × 100 / 4
P = 6 × 100
P = 600 N/m^2
a 250 mH coil of negligible resistance is connected to an AC circuit in which as effective current of 5 mA is flowing. if the frequency is 850Hz, find the inductive reactance
Answer:
the inductive reactance of the coil is 1335.35 Ω
Explanation:
Given;
inductance of the coil, L = 250 mH = 0.25 H
effective current through the coil, I = 5 mA
frequency of the coil, f = 850 Hz
The inductive reactance of the coil is calculated as;
[tex]X_l = \omega L = 2\pi f L\\\\X_l = 2\pi \times 850 \times 0.25\\\\X_l = 1335.35 \ ohms[/tex]
Therefore, the inductive reactance of the coil is 1335.35 Ω
Which of the following would NOT produce a current? A. Moving a bar magnet inside a coil of wire O B. Moving a bar magnet toward a straight wire C. Moving a straight wire toward a bar magnet O D. Placing a bar magnet next to a wire.
Answer:
c
Explanation:
Answer:C
Explanation:
Ftension
120 N
10 kg
Fg
What is the net force on the box?
O 22 Newtons upward
120 Newtons upward
O 98 Newtons downward
O O Newtons
Answer:
120N Hacia arriba
acceleration of a refrigerator 30s after a person begins pushing it at a force of 400 N
Question: Find acceleration of a refrigerator 30s after a person begins pushing it at a force of 400 N, If the mass of the refrigerator is 10 kg.
Answer:
40 m/s²
Explanation:
Applying,
F = ma................Equation 1
Where F = Force applied to the refrigerator, m = mass of the refrigerator, a = acceleration of the refrigerator.
make a the subject of the equation
a = F/m............ Equation 2
From the question,
Given: F = 400 N, m = 10 kg
Substitute these values into equation 2
a = 400/10
a = 40 m/s²
Preocupada com o aumento da tarifa na conta de luz, uma pessoa resolve economizar diminuindo o tempo de banho de 20 para 15 minutos. Seu chuveiro possui as seguintes especificações: 4200 W e 220V. Sabendo que o kWh custa R$0,30, a economia feita em 10 dias foi de aproximadamente
A rubber ball is shot straight up from the ground with a speed of 12 m/s. Simultaneously, a second identical rubber ball is dropped from rest exactly 7 m directly above the first ball. At what height (in m) do the two balls collide?
Answer:
6.17 m
Explanation:
We are given that
Initial speed of rubber ball, u=12 m/s
Total height, h=7 m
Initial speed of second ball, u'=0
We have to find the height at which the two balls collide.
Let first rubber ball and second ball strikes after t time.
For first ball
Distance traveled by first ball in time t
[tex]S=ut-\frac{1}{2}gt^2[/tex]
Substitute the value
[tex]S=12t-\frac{1}{2}(9.8)t^2[/tex]
[tex]S=12t-4.9t^2[/tex] ...(1)
Distance traveled by second ball in time t
[tex]7-S=\frac{1}{2}(9.8)t^2[/tex]
[tex]7-S=4.9t^2[/tex] .....(2)
Using equation (2) in equation (1) we get
[tex]S=12t-(7-S)[/tex]
[tex]S=12t-7+S[/tex]
[tex]\implies 12t=7[/tex]
[tex]t=\frac{12}{7}[/tex]sec
Now, using the value of t
[tex]S=12(\frac{12}{7})-4.9(\frac{12}{7})^2[/tex]
S=6.17 m
Hence, at height 6.17 m the two balls collide .
A wave with a frequency of 60 hertz would generate 60 wave crests every
Answer:
A wave with a frequency of 60 hertz will have 60 successive wave crests occurring every second
Explanation:
A crest is the highest point the medium rises to in a wave. That means that the crest is a point on the wave where the displacement is at a maximum.
Frequency is the number of oscillations of a wave in one second. Hence, frequency of a wave is the number of successive crests occurring in a second.
Therefore a wave with a frequency of 60 hertz will have 60 successive wave crests occurring every second.
What is the kinetic energy of a 10kg object moving at 2.0m/s? *
Answer:
20J
Explanation:
[tex]KE = \frac{1}{2} mv^{2} = \frac{1}{2} (10)(2)^{2} =20J[/tex]
Constants Periodic Table Part A Carla holds a ball 1.5 m above the ground. Daniel, leaning out of a car window, also holds a ball 1.5 mm above the ground. Daniel drives past Carla at 40 mph and, just as he passes her, both release their balls at the same instant.
Whose ball hits the ground first?
The balls will hit the ground simultaneously.
Daniel's.
Carla's The answer can't be determined from the data provided
Answer:
correct answer is c
The balls will hit the ground simultaneously
Explanation:
This is an exercise in kinematics, let's analyze each case separately
Carla. Holds the ball at an initial height y = 1,5m and releases the ball therefore its initial velocity is zero v₀ = 0
y = y₀ + v₀ t - ½ gt²
0 = y₀ + 0 - ½ g t²
t = [tex]\sqrt{\frac{2y_o}{g} }[/tex]
Daniel This holds the ball at I = 1.5 m and releases the ball as it passes by Carla, therefore the initial velocity is
horizontal vox = 40 mph
vertical v_{oy} = 0
y = y_{oy}I + v_{oy} t - ½ g t²
0 = y_{oy} + 0 - ½ g t²
t = [tex]\sqrt{\frac{2 y_o}{g} }[/tex]
we can see that they both spend the same time reaching the ground
t = [tex]\sqrt{2 \ 1.5 / 9.8}[/tex]
t = 0.55 s
The correct answer is c
The balls will hit the ground simultaneously
what is parallelogram law of vector addition ???
Answer:
According to the parallelogram law of vector addition if two vectors act along two adjacent sides of a parallelogram(having magnitude equal to the length of the sides) both pointing away from the common vertex, then the resultant is represented by the diagonal of the parallelogram passing through the same common vertex
Explanation:
DL: Activity 2.3 Resistance Complete the questions based on the Resistance presentation. a. All resistors ___________ or _____________ the flow of electrons. b. As resistance __________________ current _______________________
DL: Activity 2.3 Resistance
Complete the questions based on the Resistance presentation.
a. All resistors ___________ or _____________ the flow of electrons.
b. As resistance __________________ current _______________________
Answer:a) limits or opposes
b) increases, decreases
Explanation:Resistors are electrical devices used to resist, limit, oppose or hinder the flow of electrons in a circuit. This resistance causes a reduction in current and an increase in voltage in the circuit. In order words, as resistance increases, the current decreases and voltage increases.
This was further stated by Ohm's law that states that as long as the resistance in a wire/conductor remains constant, the voltage across it is directly proportional to the current flowing through a conductor. i.e
V = IR
Where;
R = constant called resistance
I = current flowing through the wire
V = voltage across the wire
Light with some unknown wavelength is incident on a piece of copper. The most energetic electrons emitted from the copper have 2.7 eV of kinetic energy. If the copper is replaced with a piece of sodium, what will be the maximum possible kinetic energy K of the electrons emitted from this new surface
This question is in complete, the missing table is uploaded along this answer.
Answer:
the maximum possible kinetic energy K of the electrons emitted from this new surface is 4.9 eV
Explanation:
Given the data in the question;
copper K = 2.7 eV
If the copper is replaced with a piece of sodium ( Na )
the maximum possible kinetic energy K of the electrons emitted from this new surface = ?
we know that;
Kinetic energy of emitted electrons can be written as;
K = hv - hv₀
where v is frequency, h is Plank's constant, and hv₀ is work function of metal
so lets make hv the subject of formula;
hv = K + hv₀
from the table below, work function of copper is 4.5 eV
so we substitute
hv = 2.7 eV + 4.5 eV
hv = 7.2 eV
Now, If the copper is replaced with a piece of sodium ( Na )
we have;
K = hv - hv₀
from the table below, work function of Sodium is 2.3 eV
so we substitute
K = 7.2 eV - 2.3 eV
K = 4.9 eV
Therefore, the maximum possible kinetic energy K of the electrons emitted from this new surface is 4.9 eV
a net force of 5N is applied to a 13kg mass. what is its acceleration?
Answer:
[tex]\boxed {\boxed {\sf a \approx 0.4 \ m/s^2}}[/tex]
Explanation:
According to Newton's Second Law of Motion, force is the product of mass and acceleration.
[tex]F= m \times a[/tex]
The net force is 5 Newtons and the mass is 13 kilograms. Let's convert the units for force to make the problem and unit cancellation easier.
1 Newton (N) is equal to 1 kilogram meter per square second (1 kg*m/s²) The net force of 5 N is equal to 5 kg*m/s²Now we know the values for 2 variables:
F= 5 kg*m/s²m= 13 kgSubstitute the values into the formula.
[tex]5 \ kg *m/s^2 = 13 \ kg * a[/tex]
Since we are solving for the accleration we must isolate the variable, a. It is being multiplied by 13 kilograms and the inverse of multiplication is division. Divide both sides by 13 kg
[tex]\frac {5 \ kg *m/s^2}{13 \ kg}= \frac{ 13 \ kg *a}{13 \ kg}[/tex]
[tex]\frac {5 \ kg *m/s^2}{13 \ kg}=a[/tex]
The units of kilograms (kg) cancel.
[tex]\frac {5 m/s^2}{13 }=a[/tex]
[tex]0.384615385\ m/s^2=a[/tex]
The original measurements of force and mass ( 5 and 13) have 1 and 2 significant figures. We must round our answer to the least number of sig figs: 1.
For the number we found, that is the tenths place. The 8 in the hundredth place (0.384615385) tells us to round the 3 up to a 4.
[tex]0.4 \ m/s^2 \approx a[/tex]
The acceleration is approximately 0.4 meters per square second.
During a circus act, an elderly performer thrills the crowd by catching a cannon ball shot at him. The cannon ball has a mass of 72.0 kg and its horizontal component of velocity is 6.50 m/s just before the 65.0 kg performer catches it. If the performer is initially motionless on nearly frictionless roller skates, what is his speed immediately after catching the cannon ball
Answer:
3.416 m/s
Explanation:
Given that:
mass of cannonball [tex]m_A[/tex] = 72.0 kg
mass of performer [tex]m_B[/tex] = 65.0 kg
The horizontal component of the ball initially [tex]\mu_{xA}[/tex] = 6.50 m/s
the final velocity of the combined system v = ????
By applying the linear momentum of conservation:
[tex]m_A \mu_{xA}+m_B \mu_{xB} = (m_A+m_B) v[/tex]
[tex]72.0 \ kg \times 6.50 \ m/s+65.0 \ kg \times 0 = (72.0 \ kg+65.0 \ kg) v[/tex]
[tex]468 kg m/s + 0 = (137 kg)v[/tex]
[tex]v = \dfrac{468\ kg m/s }{137 \ kg}[/tex]
v = 3.416 m/s
A system consists of a gas in an enclosed cylinder attached to a movable piston. The system is initially at 63 L and then is compressed to 31 liters. Determine the sign of work. Will it be a negative or positive
Answer:
The sign of work will be negative.
Explanation:
The work of the system is given by:
[tex] W = _{V_{i}}^{V_{f}}\int pdV = p(V_{f} - V_{i}) [/tex]
Where:
[tex]V_{f}[/tex]: is the final volume = 31 L
[tex]V_{i}[/tex]: is the initial volume = 63 L
p: is the pressure
Even though we do not have the pressure value, by knowing the values of the initial and final volume we can predict the sign of work.
[tex] W = p(V_{f} - V_{i}) = p(31 L - 63 L) = -32p [/tex]
Therefore, the sign of work will be negative.
I hope it helps you!