Who has played Amoung us and a stranger got ur number or location on there?
Yep, it happened to me
Which pollution effects the environment the most?
A. air pollution
B. water pollution
C. land pollution (ex. throwing trash in nature)
D. Noise pollution
Answer:
Air pollution effect the most
ANSWER :
A. air pollutionExtra Information :
❥ Air pollution can damage crops and trees in a variety of ways.
❥ Ground-level ozone can lead to reductions in agricultural crop and commercial forest yields, reduced growth and survivability of tree seedlings, and increased plant susceptibility to disease, pests and other environmental stresses (such as harsh weather).
Hope it helps ya...!!♡
You have a block of wood with a mass of 700 grams and a volume of 1100 cm.
What is the density of wood?
A 10.0 cm by 4.00 cm pool is filled with water to a depth of 2.50 cm. How many joules are needed to heat the water from 18.5oC to 32.0oC? Cp of water = 4.184 J/goC
Answer:
5648.4 Joules
Explanation:
This problem can be solved by the calorimetry formula:
Q = C . m . ΔT
where ΔT indicates the change of temperature
Final T° - Initial T°
m = mass
C = specific heat of water and Q = Heat
We do not have m, but we have the volume of water. We can obtain mass from density.
Volume of water = 10 cm . 4cm . 2.50 cm = 100 cm³
1 cm³ = 1 mL
Density of water = 1 g/mL
Therefore our 100 mL of water is the volume for 100 g. We replace data:
Q = 4.184 J/g°C . 100 g . (32°C - 18.5°C)
Q = 5648.4 Joules
20 mL of hydrogen measured at 15° C is heated to 35°C.
What is the new volume at the same pressure?
V2 = 21.4 ml
Explanation:
Note: When dealing with gases, make sure that you change the units from °C to K.
T1 = 15°C + 273 = 288K
T2 = 35°C + 273 = 308K
V1 = 20 ml
V2 = ?
We use Charles's law to solve V2:
V1/T1 = V2/T2
or
V2 = (T2/T1)V1
= (308K/288K)(20 ml)
= 21.4 ml
WILL MARK BRAINLIEST!!!!
How many moles are there in 993.6 grams of potassium sulfate (K2SO4)?
Answer:
5.702 mol K₂SO₄
General Formulas and Concepts:
Atomic Structure
Reading a Periodic TableCompoundsMolesStoichiometry
Using Dimensional AnalysisExplanation:
Step 1: Define
[Given] 993.6 g K₂SO₄
[Solve] moles K₂SO₄
Step 2: Identify Conversions
[PT] Molar Mass of K: 39.10 g/mol
[PT] Molar Mass of S: 32.07 g/mol
[PT] Molar mass of O: 16.00 g/mol
Molar Mass of K₂SO₄: 2(39.10) + 32.07 + 4(16.00) = 174.27 g/mol
Step 3: Convert
[DA] Set up: [tex]\displaystyle 993.6 \ g \ K_2SO_4(\frac{1 \ mol \ K_2SO_4}{174.27 \ g \ K_2SO_4})[/tex][DA] Divide [Cancel out units]: [tex]\displaystyle 5.7015 \ mol \ K_2SO_4[/tex]Step 4: Check
Follow sig fig rules and round. We are given 4 sig figs.
5.7015 mol K₂SO₄ ≈ 5.702 mol K₂SO₄
Al aumentar la temperatura ¿Cómo varía la presión?
Answer:
california y nueva york
Explanation:
Answer:
las partículas se mueven más rápido, y por lo tanto tienen mayor velocidad, por lo tanto mayor impulso y por lo tanto mayor fuerza cuando chocan con las paredes, por lo que la presión aumenta.
Explanation:
Fusion reactions power the _____ in space. Humans currently use fusion in _____ , but researchers are seeking more applications.
Answer:
Sun and the stars, nothing humans don't use fusion at all
Explanation:
Nuclear fusion reactions power the sun in space. Humans currently use fusion in nuclear weapons by means of nuclear reactions, but researchers are seeking more applications.
What are nuclear reactions?There are two types of nuclear reactions which are nuclear fusion and nuclear fission .They involve the combination and disintegration of the element's nucleus respectively.
In nuclear fission, the nucleus of the atom is bombarded with electrons of low energy which splits the nucleus in to two parts .Large amount of energy is released in the process.It is used in nuclear power reactors as it produces large amount of energy.
In nuclear fusion,on the other hand, is a reaction which occurs when two or more atoms combine to form a heavy nucleus.Large amount of energy is released in the process which is greater than that of the energy which is released in nuclear fission process.
Learn more about nuclear reactions,here:
https://brainly.com/question/12649087
#SPJ7
__________________ are high-speed bands of winds occurring at the top of the tropsophere.
Your answer:
Doldrums
Horse Latitudes
Jet Streams
Trade Winds
Answer:
jet streams
Explanation:
THE JET STREAM Narrow bands of exceedingly high speed winds are known to exist in the higher levels of the atmosphere at altitudes ranging from 20,000 to 40,000 feet or more. They are known as jet streams.
A 125 ml sample of gas is at STP how many moles of gas are in the sample
Answer:
5.58*10⁻³ moles of gas are in the sample.
Explanation:
The STP conditions refer to the standard temperature and pressure. Pressure values at 1 atmosphere and temperature at 0 ° C are used and are reference values for gases. And in these conditions 1 mole of any gas occupies an approximate volume of 22.4 liters.
Being 1000 mL equivalent to 1 L, then 125 mL is equal to 0.125 L. Then you can apply the following rule of three: if by STP conditions 22.4 L are occupied by 1 mole, 0.125 L are occupied by how many moles?
[tex]amount of moles=\frac{0.125 L*1 mole}{22.4 L}[/tex]
aomunt of moles= 5.58*10⁻³ moles
5.58*10⁻³ moles of gas are in the sample.
Answer:
5.58×10⁻³ moles of gas
Explanation:
There is a rule that says, that 1 mol of any gas, at STP is contained at 22.4L of volume.
We can apply a conversion factor
0.125 L . 1 mol / 22.4 L = 5.58×10⁻³ moles
Notice we converted volume from mL to L
We can also aply the Ideal Gases Law.
At STP we have 1 atm of pressure and 273.15K of T°
We replace data: 0.125 L . 1 atm = n . 0.082 . 273.15K
(0.125 L . 1 atm) / (0.082 . 273.15 K) = n
n = 5.58×10⁻³ moles
MgCl2 + NaOH → Mg(OH)2 +Naci
Balance
Perform the following
mathematical operation, and
report the answer to the
appropriate number of
significant figures.
4.7257 - 3.12 = [?]
Answer:
1.61
Explanation:
I got this answer from a calculator and it's correct.
If the imaginary element Blobbium (Bb) formed an acid with the formula H₃Bb, what should this acid be named? *
Blobbic Acid
Blobbous Acid
Hydroblobbic Acid
Hydroblobbous Acid
Answer:
C
Explanation:
The non metal in HCl is Chlorine and the name of the acid is Hydrochloric acid.
H = hydro
Cl = chloric
So I imagine this new acid, yet to be discovered even by the crew of the Star Ship enterprise, would be
HydroBlobbic acid
I await news from Spock on how things are going on the discovery of such a thing. So far he has not said anything about it.
Which statement is true about molarity and percent by mass? (3 points)
Question 4 options:
1)
Both are ratios of the amount of solute over the amount of solution.
2)
They are ratios of the dilution over the concentration.
3)
They are inversely related.
4)
Both measure dilution.
Answer:
The correct answer is - Both are ratios of the amount of solute over the amount of solution.
Explanation:
Molarity is the number of moles of a substance in 1 liter of the solution. Another unit of the concentration, weight percentage, refers to the ratio of the mass of the solute (a dissolved substance) to the mass of the solution.
Molarity is to divide moles by liters, but the convention in mass percent is to divide grams by milliliters. If you prefer to think only in terms of liters (not milliliters), then simply consider mass percent as kilograms divided by liters.
Answer:
A. Both are ratios of the amount of solute over the amount of solution.
Hope this helps! :D
Explanation:
Please help this will determine my grade so I beg help me out and my grade
Answer:
C: checking your email
Explanation:
I believe that C would be impossible, as you cannot use wireless networks without radio waves
What volume of 15.9 M Nitric acid would be required to make 7.2 L of 6.00 M nitric acid? (hint: dilution problem) will mark brainliest if correct
a. 2.72 L
b. 686.88 L
c. .075 L
d. 272
Answer:
d
Explanation:
A river, such as the one in the diagram, receives pollution from all the different sources shown. The types of pollutants and the amounts that enter the river will be different, but all the sources contribute to pollution of this freshwater.
. Which sources of pollution are point sources?
A. factories, cropland
B. wastewater treatment plants, factories
C. urban streets, suburban development
D. urban streets, suburban development, rural homes, cropland, animal feedlot
Answer:
A. factories, cropland
Explanation:
The point sources are identified as the sources of water pollution such as dirty drains and other sources of discharge. Factors and sewage treatment plants are sources of discharge and are the two most common points.18. How many grams are in 563 mL of chlorine gas at STP?
Answer:
[tex]at \: stp : \\ 22400 \: ml \: are \: occupied \: by \: 71 \: g \: of \: chlorine \\ 563 \: ml \: will \: be \: occupied \: by \: ( \frac{563}{22400} \times 71) \:g \\ = 1.78 \: g[/tex]
What is the molarity of a 1.283 L solution that is made from 16.88 g of NaCl?
Answer in units of M.
Answer:
0.225M
Explanation:
Equation: M=n/v
n = moles of solute
v = liters of solution
NaCl = 58.443 g/mol
16.88/58.443= 0.289 moles of NaCl
0.289/1.283=0.225M
Calculate the mass of NaOH
required to prepare a 0.343M
solution dissolved in 2500mL
of water.
Answer:
will this work or help?
Explanation:
Calculate the mass of NaOH required to prepare a 0.343 M solution dissolved in 2500 mL of water. 0.343 M = x mol / 2.5 L = 0.86 mol 0.86.
Een luipaardgekko weegt gemiddeld 100 g, figuur 7.33.
c Denk je dat de gekko als hij 60 kg weegt in plaats van
100 g even gemakkelijk over het plafond kan lopen?
Answer:
english?
Explanation:
The diagram shows genetic structures.
Which label best represents the area marked Y?
chromosome
protein
gene
DNA
Answer:
The correct answer is - DNA (check image).
Explanation:
In this diagram, The W mark is the nucleus of the cell X is the chromosome Y represents the DNA and Z is the gene. Gene is the segment of the DNA and DNA is the pat of the chromosome with histone. Chromosomes are present in the nucleus of the cell. These all are the structures of the genetic structures.
Thus, the correct answer is - DNA.
Answer:
dna
Explanation:
edge
What is one question I would ask from conducting a research on inhalants?
What is the molarity of 15.0 milliliters of an unknown acid that is titrated
with a 1.25 M NaOH solution and required 24.65 milliliters of base to
complete the titration?
Answer:
~2.054M
Explanation:
In this question ,I am going to assume that the acid is monoprotic acid(contains only one hydrogen) which I'll represent by HA.
Chemical equation:
NaOH(aq) + HA(aq)----->NaA(aq) + H2O(l)
The mole ratio of NaOH:HA is 1:1
1.25M NaOH=1.25 Moles/L or 1.25 moles /1000ml of NaOH
(1.25 moles /1000ml) x (24.65ml)=0.0308125 moles NaOH
Mole ratio is 1:1
So, moles of HA are also 0.0308125 moles
volume of HA =15ml
To find molarity of HA:
=(0.0308125 moles x 1000ml)/(15ml)
~2.054M of HA
~Hope it helps:)
Circle the solution with the highest concentration
a. 5.0M
c. 0.6M
b. 1.0M
d. 0.75M
Answer:
answer is option a..............
A large pile of marbles weigh 592.45g. 15 marbles weigh 43.35 g. How
many marbles are in the large pile
Answer:
205 marbles.
Explanation:
Hello there!
In this case, according to the given information in this problem, it is possible for us to realize that the weight of 15 marbles is 43.35 g and the idea is to calculate the number of marbles in 592.45 g, so we can use the following setup:
[tex]\frac{15marbles}{43.35g} =\frac{x}{592.45g}[/tex]
And we solve for x as follows:
[tex]x=\frac{15marbles*592.45g}{43.35g} \\\\x=205marbles[/tex]
Regards!
What is the pH of 0.0000043M HNO3 ? (3 sig figs, round the last digit only if needed)
Answer:
pH = 5.37
Explanation:
We'll begin by obtaining the concentration of the hydrogen ion in the solution. This can be obtained as follow:
HNO₃ (aq) —> H⁺ (aq) + NO₃¯ (aq)
From the balanced equation above,
1 mole of HNO₃ produced 1 mole of H⁺.
Therefore, 4.3×10¯⁶ M HNO₃ will also produce 4.3×10¯⁶ M H⁺.
Finally, we shall determine the pH of the solution. This can be obtained as follow:
Concentration of Hydrogen ion [H⁺] = 4.3×10¯⁶ M
pH =?
pH = –Log [H⁺]
pH = –Log 4.3×10¯⁶
pH = 5.37
Therefore, the pH of the solution is 5.37
Which equation represents conservation of charge? 1 + 2e → 12 2 21° 12 +2e 3 Br2 → 2Br + 2e Br + 2e Br
*With explanation
Answer:
Question is tough
Explanation:
I don't know sorry dude
Answer:2l- —> l2 + 2e
Explanation:
what is non polar covalent bond
Answer:
It is formed between two atoms of the same elements having same electronegativity in which the bonding electrons are equally shared between them. In this case, the centre of the positive charge coincides with the centre of the negative charge in theecular molecule. H, N: 0. etc. are the molecules in which non polar covalent bonds invalved. These substances are called non polar substances.
Answer:
A nonpolar covalent bond is a covalent bond in which the bonding electrons are shared equally between the two atoms. In a nonpolar covalent bond, the distribution of electrical charge is balanced between the two atoms.
Explanation:
Consider the following reaction:
CH3COOH + H2O CH3COO- + H3O+
A buffer solution is prepared by adding NaCH3COO(s) to CH3COOH(aq). What happens to the equilibrium when a few drops of NaOH solution are added to the buffer?
A. It shifts left and [CH3COO-] increases.
B. It shifts left and [CH3COO-] decreases.
C. It shifts right and [CH3COO-] increases.
D. It shifts right and [CH3COO-] decreases.
Answer:
I would say:
C. It shifts right and [CH3COO-] increases.
Explanation:
I am uncertain, but since NaOH is basic I think it should shift right.
hope this helps though