Answer:
9sqrt4
Explanation:
Assuming you mean 6.0i m/s and (-2.0i + 4.0j) m/s^2:
The maximum positive x coordinate is when the time is 3 seconds, because the horizontal velocity will be zero, and therefore will be a turning point, where after that point the x coordinate will only be more negative.
After 3 seconds the x coordinate is 6*3+1/2*-2*3^2=9, and the y coordinate will be 1/2*4*3^2=18.
The distance from the origin is sqrt(9^2+18^2) = 9*sqrt(1+4)
At the instant the particle achieves its maximum positive x coordinate, the displacement is 4.03 m.
Displacement of the particle
The displacement of the particle is calculated as follows;
v² = u² + 2as
where;
a is accelerationa = √(2² + 4²) = 4.47 m/s²
0 = u² + 2as
s = -u²/2a
s = -(6²)/(2 x 4.47)
s = -4.03 m
Thus, at the instant the particle achieves its maximum positive x coordinate, the displacement is 4.03 m.
Learn more about displacement here: https://brainly.com/question/321442
#SPJ6
Someone help me please !!!! Will mark Brianliest !!!!!!!!!!!!!!!!
the driver of a 2.0 × 10³ kg red car traveling on the highway at 45m/s slams on his brakes to avoid striking a second yellow car in front of him, which had come to of because locking ahead.After the brakes are applied a constant friction force of 7.5 × 10³ N acts on the car ignore air resistance.
a₎ Determine the least distance should the brakes be applied to avoid a collision with the other vehicle?
Answer:
Explanation:
a = F/m = 7500/2000 = 3.75 m/s²
v² = u² + 2as
s = (v² - u²) / 2a
s = (0² - 45²) / (2(-3.75))
s = 270 m
Water pumps use electrical energy to create mechanical energy needed to move water.
A 1875 W water pump is plugged into a 110 V electrical outlet.
Answer:
n/a
Explanation:
this question is not feasible
1. The acceleration equation of a certain particle is a=2t, after 4s, its velocity reaches 20m/s, then the initial velocity of the particle movement is ) ms B Sms 2.
Answer:
Change in velocity is the integral of all the differential accelerations acting over the period of acceleration.
[tex]20 = u + \int\limits^4_0 {2t} \, dt[/tex]
20 = u + t²[tex]\left \{ {{4} \atop {0}} \right.[/tex]
20 = u + 4² - 0²
20 = u + 16
u = 4 m/s
Ginny is snowboarding down a ski slope. Her total mass (including the snowboard) is 68.5 kg. When she reaches the bottom of the slope, she is moving at 6.55 m/s. The coefficient of friction between the snowboard and the ground is 0.088 . How fast will Ginny be moving 2 seconds after reaching the bottom of the slope?
1) 5.71 m/s
2)5.91 m/s
3)4.82 m/s
4)4.08 m/s
Answer:
Explanation:
Assuming the run out at the bottom of the slope is horizontal
μ = Ff/N = Ff/mg
Ff = μmg
a = Ff/m = μmg/m = μg
v = u + at
v = u + μgt
v = 6.55 - 0.088(9.81)(2)
v = 4.82 m/s
After reaching the bottom of the slope, it will take a speed of 4.8m/s to reach. So, the correct option is (C).
What is Friction?Friction is the force which opposes the relative motion of solid surfaces, fluid layers, and material elements that are sliding against each other. There are many types of friction like
Dry frictionFluid frictionLubricated friction Skin friction Internal frictionFriction can be expressed as
Ff = μFN
where, Ff is the force of friction (N)
μ is the coefficient of friction.
FN is the normal force
As per the above equation, it is actually the normal force, not the weight, which is responsible for friction.
For given information,
Assuming the bottom of the slope is horizontal
So, μ = Ff/N = Ff/mg
Ff = μmg
a = Ff/m = μmg/m = μg
v = u + at (u- initial speed, v= final speed, a= acceleration and t= time)
v = u + μgt (g= acceleration due to gravity)
u = 6.55 - 0.088(9.81)(2)
u = 4.82 m/s
Thus, after reaching the bottom of the slope, it will take a speed of 4.8m/s to reach. So, the correct option is (C).
Learn more about Friction, here:
https://brainly.com/question/13000653
#SPJ2
Lisa runs up 4 flights of stairs in 22 seconds. She weighs 510 Newtons. If each flight rises 310 cm: (a) What is her change in potential energy? (b) What average power (watts) was required during the 22 s?
The change in potential energy is 6324 Joules while the power is 263.5 Watts.
Potential energy is the amount of energy possessed by a body due to its position relative to another object.
a) Potential energy = weight * height = 510 N * 4 flight * 3.1 m per flight
Potential energy = 6324 Joules
b) Power = Energy / time = 6324 Joules / 22 seconds = 263.5 Watts
The change in potential energy is 6324 Joules while the power is 263.5 Watts.
Find out more on potential energy at: https://brainly.com/question/14427111
Which of the following is NOT a function of the lens in the eye?
It can perform minor adjustments for distance.
It flattens when light rays from distant objects are to be focused.
It is a light receptor that generates nerve signals that are sent to the brain.
It maintains its spherical shape to view nearby objects.
Answer:
it is a light receptor that generates nerve signals that are sent to the brain
Explanation:
the lens are like the glasses, this means that is used to see things better. You just put them in your eye and that's all it's not connected to the brain
Answer:
c
Explanation:
) Water flows through the system shown below. Estimate the volumetric flow rate if friction
losses are negligible.
The volumetric flow rate if friction is negligible = 0.00197 m³/sec
Given data :
P₁ = 7 atm = 709.275 kPa
P₂ = 1.5 atm = 151.988 kPa
d₁ = 0.74 cm = 0.0074 m
d₂ = 1.20 cm = 0.0120 m
h = 82 m
density of water ( p ) = 1000 kJ/m³
Estimate the volumetric flow rate
given that friction losses are negligible
V₁² - V₂² = [tex]\frac{2(P_{2} - P_{1}) }{p} + 2g(h )[/tex]
= 2( 151.988 - 709.275 ) + 2 * 9.81 * 82
= 2 ( - 557.287 ) + 1608.84
= - 1114.574 + 1608.84 = 494.266
∴ V₁² - V₂² = 494.266 ----- ( 1 )
Also given that:
volumetric flow rate ( Q ) = A₁V₁ = A₂V₂
= π / 4 ( 0.0074 )² * V₁ = π / 4 ( 0.0120 )² * V₂
= 0.000043 V₁ = 0.000113 V₂
∴ V₁ = 2.63 V₂
Back to equation ( 1 )
( 2.63 v₂ )² - V₂² = 494.266
V₂² = ( 494.266 ) / 1.63
∴ V₂ = √303.23 = 17.41 m/sec
Therefore the volumetric flow rate ( Q )
Q = A₂V₂
= π / 4 * ( 0.0120 )² * 17.41
= 0.00197 m³/sec
Learn more about volumetric flow rate : https://brainly.com/question/24356835
A first order reaction is 25% completed in 1h minutes. Calculate the time required for its 50% completion.
If 90J of energy are available for every 30C of charge, what is the potential difference?
Enter your answer as a number
V
Answer:
3 v
Explanation:
A small ball with a mass of 0.6 kg and a velocity of 12 m/s hits another ball with the same mass. The firs forward and hits a third ball with a mass of 0.2 kg. If the system is closed, what is the velocity of the third ball?
4 m/s
36 m/s
30 m/s
1.44 m/s
Would it be possible to predict the speeds that a coaster will reach before it’s ever placed on the track?
Yes, it's possible to predict the speeds that a coaster will reach before it’s
ever placed on the track.
This is usually calculated with the potential energy which is
Potential energy = m g h
where m is mass, g is acceleration due to gravity and h is height.
The given formula above is used in predicting the speeds that a coaster will
reach before it’s ever placed on the track.
Read more about Speed here https://brainly.com/question/14298262
A 2N and an 6N force pull on an object to the right and a 4N force pulls on the object to the left. If the object has a mass of 0.25 kg what is its acceleration?
Answer:
[tex]16m/s^{2}[/tex]
Explanation:
Please ask if you have more questions!
how is the atomic mass determined?
Answer:
Atomic mass is defined as the number of protons and neutrons in an atom, where each proton and neutron has a mass of approximately 1 amu (1.0073 and 1.0087, respectively). The electrons within an atom are so miniscule compared to protons and neutrons that their mass is negligible.
Explanation:
How large is the tension in a rope that is being used to accelerate a 100 kg box upward at 2m/s2?
[tex]\\ \sf\Rrightarrow T=F[/tex]
[tex]\\ \sf\Rrightarrow T=ma[/tex]
[tex]\\ \sf\Rrightarrow T=100(2)[/tex]
[tex]\\ \sf\Rrightarrow T=200N[/tex]
Which phrase describes the energy transformation that happens in a
generator?
A. Electrical energy into chemical energy
ООО
B. Electrical energy into mechanical energy
C. Chemical energy into electrical energy
O
D. Mechanical energy into electrical energy
SI
Answer:
Mechanical energy into electrical energy
Explanation:
Answer:
ExplanMechanical energy into electrical energy
SIation:
what is the speed of a boy moving around a circular park of radius 6m if he goes around the park in 20s
Answer:
1.884 meters per second
Explanation:
s = d/t
d = C = 2πr = 2π(6) = 37.68 m
t = 20 s
s = (37.68 m)/(20 s)
s = 1.884 m/s
The speed of the boy is 1.88 m/s while he is moving around a circular park of radius 6m and taking time 20 seconds.
What is speed?Speed can be defined as a measurement of how quickly the distance an object traveled changes with time. Speed is a scalar quantity as it has magnitude but no direction as a unit of measurement.
An object that moves quickly and with high speed, traveling a lot of ground in a lesser time.
Given, the radius of the circular park, r = 6m,
The time taken to cover one round of the park, t = 20 s
The total distance traveled by the boy is equal to the circumference of the circular park, so
Circumference of park, C = d = 2πr = 2× 3.14 × 6 =37.68 m
The speed of the boy, S = d/t
S = 37.68 /20
S = 1.88 m/s
Therefore, the speed of the boy is equal to 1.88 m/s.
Learn more about speed, here:
brainly.com/question/13074982
#SPJ2
1. A 10 kg rocket blast off the ground with an applied force of 150 N, calculate the net force
of your rocket
The net force on the rocket at the given applied force is 52 N.
The given parameters:
Mass of the rocket, m = 10 kgApplied force, F = 150 NThe net force on the rocket is calculated by applying Newton's second law of motion as follows;
F(net) = F(up) - F(down)
F(net) = 150 - mg
F(net) = 150 - (10 x 9.8)
F(net) = 150 - 98
F(net) = 52 N
Thus, the net force on the rocket at the given applied force is 52 N.
Learn more about Newton's second law of motion here: https://brainly.com/question/25307325
Which combination of three concurrent forces acting on a body could not produce equilibrium?
1
1 N, 3N, EN
2
2 N, 2N, 2N
.
3.
3 N, 4N, EN
4.
4N, 4N, 5N
All the three concurrent forces acting on a body will not produce equilibrium.
The given parameters:
1. 1 N, 3 N and 5 N
2. 2N, 2N and 2 N
3. 3N, 4N and 5 N
4. 4N, 4N and 5 N
Concurrent forces lie on the same plane and their line of action pass through a common point.
A body under concurrent forces is in equilibrium if the resultant of the forces on the body is zero.
[tex]\Sigma F = 0\\\\F_1 + F_2 + F_3 = 0\\\\F_1 + F_ 2 = - F_3[/tex]
where;
[tex]F_3[/tex] is the equilibrant force
First set of concurrent forces;
[tex]1 \ N \ + \ 3\ N = 4 \ N\\\\F_ 3 = 5 \ N\\\\5 \ N > 4 \ N[/tex]
Second set of concurrent forces;
[tex]2 \ N \ + \ 2 \ N = 4 \ N\\\\F_ 3 = 2 \ N\\\\4 \ N > 2 \ N[/tex]
Third set of concurrent forces;
[tex]3 \ N \ + \ 4 \ N = 7 \ N\\\\F_ 3 = 5 \ N\\\\7 \ N > 5 \ N[/tex]
Fourth set of concurrent forces;
[tex]4 \ N \ + \ 4 \ N = 8 \ N\\\\F_ 3 = 5 \ N\\\\8 \ N > 5 \ N[/tex]
Thus, we can conclude that all the three concurrent forces acting on a body will not produce equilibrium.
Learn more about concurrent forces here: https://brainly.com/question/20165540
Which is the independent variable in the graph of the U.S. population 1800-1900?
1. United States
2. straight lines
3. years
4. population
Answer:
3. years
Explanation:
The independent variable is the x axis of graph
I need help with this question!
Answer:
Explanation:
Conservation of momentum
In the x direction
2(15) + 2(-10) = 2(-5) + 2(vBfx)
vBfx = 10 m/s
In the y direction
2(30) + 2(5) = 2(20) + 2(vBfy)
vBfy = 15 m/s
vBf = 10i + 15j
KEi = ½(2)(15² + 30²) + ½(2)(-10² + 5²) = 1250 J
KEf = ½(2)(-5² + 20²) + ½(2)(10² + 15²) = 750 J
KEf - KEi = 750 - 1250 = -500 J
help me i have little time left i will give brainliest
Answer:
Explanation:
Conservation of momentum
Initial momentum is zero
3.0(6.0) + 7.0v = 0
v = -18/7 = - 2.57142857...
|v| = 2.6 m/s
A 2.98-kg object oscillates on a spring with an amplitude of 8.05 cm. Its maximum acceleration is 3.55 m/s2. Calculate the total energy.
Answer:
a = ω^2 A formula for max acceleration (ignoring sign)
V = ω A formula for max velocity
V^2 = ω^2 A^2 = a A from first equation
E = 1/2 M V^2 = 1/2 * 2.98 * 3.55 * .0805 = .426 J
(kg * m/sec^2 * m = kg m^2 / sec^2 = Joule
i need help with the problem below
Answer:
Explanation:
a) F = ma
a = F/m
a = 9(800) / 1 x 10⁹ = 7.2 x 10⁻⁶ m/s
b) t = v/a
t = 200 / 7.2 x 10⁻⁶
t = 2.8 x 10⁷ s about 10½ months
c) v² = u² + 2as
s = (v² - u²) / 2a
s = (200² - 0²) / (2( 7.2 x 10⁻⁶))
s = 2.8 x 10⁹ m nearly 7 times around the earth
And all this assumes NO FRICTION.
Use words in the box to complete the diagram, and the definitions below it. Some words will be used
more than once and some words may not be used at all
Hertz
period
metros
dip
seconds
peak
wavelength trough
crest
frequency
amplitudo
oscillation equilibrium line
- the top of a wave
the bottom of a wave
the level if the wave flattened out
a repeated action back and forth or up and down
the number of waves that pass every second (measured in
the time it takes for one complete wave to pass (measured in
Answer:
There ya go
Explanation:
The correct words to fill the given blanks would be as follows:
- Peak
- Trough
- Equilibrium Line
- Oscillation
- Frequency, Hertz
- Period, seconds
The "peak" is denoted as the highest or maximum point that the wave attains while 'Trough' is characterized as the base of the wave. The 'equilibrium line' is characterized as the extent to which the wave flattens or compresses.Oscillation is defined as the process in which an object moves in the "back and forth motion."Frequency is the amount of occurrences that waves travel in a second which is denoted in the terms of Hertz.Lastly, period is the duration required by wave to accomplish one motion is denoted in terms of seconds.Amplitude is the breadth or magnitude of the waves.Learn more about "Oscillation" here:
brainly.com/question/9820984
when a student comned his dry hair for a long time, his hair began to stand up. Which of these has MOST LIKELY happened
His hair got charged due to continuous friction causing them to get attracted to other objects and thus standing up.
Answer:The comb and hair have become charged with opposite charges.
Explanation:When a comb is run through your hair charges pass between your hair and the comb, so the comb becomes charged either positively or negatively, and the hair oppositely charged. When the comb is brought close to paper an opposite charge is induced in the paper, and the opposite charges attract.
You hang a light in front of your house using an
elaborate system to keep the 12-kg object in static
equilibrium (Figure 1). What are the magnitudes of the
forces that the ropes must exert on the knot connecting
the three ropes if 02 = 639 and 03 = 45° ?
The magnitudes of the forces that the ropes must exert on the knot connecting are :
F₁ = 118 N F₂ = 89.21 N F₃ = 57.28 NGiven data :
Mass ( M ) = 12 kg
∅₂ = 63°
∅₃ = 45°
Determine the magnitudes of the forces exerted by the ropes on the connecting knota) Force exerted by the first rope = weight of rope
∴ F₁ = mg
= 12 * 9.81 ≈ 118 kg
b) Force exerted by the second rope
applying equilibrium condition of force in the vertical direction
F₂ sin∅₂ + F₃ sin∅₃ - mg = 0 ---- ( 1 )
where: F₃ = ( F₂ cos∅₂ / cos∅₃ ) --- ( 2 ) applying equilibrium condition of force in the horizontal direction
Back to equation ( 1 )
F₂ = [ ( mg / cos∅₂ ) / tan∅₂ + tan∅₃ ]
= [ ( 118 / cos 63° ) / ( tan 63° + tan 45° ) ]
= 89.21 N
C ) Force exerted by the third rope
Applying equation ( 2 )
F₃ = ( F₂ cos∅₂ / cos∅₃ )
= ( 89.21 * cos 63 / cos 45 )
= 57.28 N
Hence we can conclude that The magnitudes of the forces that the ropes must exert on the knot connecting are :
F₁ = 118 N, F₂ = 89.21 N, F₃ = 57.28 N
Learn more about static equilibrium : https://brainly.com/question/2952156
refers to a fear of being trapped in a crowded, public place.
Answer:
Agrophobia
Explanation:
an anxiety disorder in which someone feals anxious and scared in a public place
Ram jumps onto a cement floor from a height of 1m and comes to rest in 0.1sec.
Then he jumps onto a sand floor from a height of 9m and comes to rest in 1sec.
Find the ratio of forces of cement floor and sand floor.
Answer:
3/10 F.
Explanation:
Height ( h ) = 1m
Time taken ( t ) = 0.1 second
Height² ( h² ) = 9m
Time taken² ( t² ) = 1 second
Solution,
F = ma
= m ( v - u ) / t
= m √2gh / t
now,
F/F² = √h/h² × t/t²
F¹ = 3/10 F.
answer !!
13. In which of the following climates does chemical weathering generally occur most
rapidly?
A. Canda
B. Greenland
C. Brazil
D. Algeria