Answer:
No, because it is low, which is characteristic of covalent compounds.
Explanation:
Hello there!
In this case, for the analysis of this liquid whose boiling point is 50 °C, it is necessary for us to keep in mind that ionic compounds have high boiling points whereas covalent compounds tend to have lower boiling points. This is due to the fact that ionic compounds have stronger intermolecular forces, so more thermal energy is required for the reaction; and covalent compounds are more weakly held together so their boiling points tend to be relatively low.
In such a way, since 50 °C is a relatively low boiling point, in comparison to waters that is about 100°C and it is polar covalent, we infer this compound is not likely to be an ionic compound but a covalent compound.
Regards!
A balloon with a volume of 2.0 L is filled with gas at 3 atm. If the pressure is reduced to 1.5 atm without a change in temperature, what would be the new volume of the balloon?
In the graphic,
X represents which element?
40
20
Answer:Ca
Explanation:
When do we observe more than one broad band in the fluorescence spectrum?
What types of medium(s) can sound travel
through?
solids
liquids
all of them
gasses
Explanation:
Of the three mediums (gas, liquid, and solid) sound waves travel the slowest through gases, faster through liquids, and fastest through solids. Temperature also affects the speed of sound. Gases: The speed of sound depends upon the properties of the medium it is passing through.
Answer:
all of them
Explanation:
As talking about sound,all of them are responsible for this.Sound can travel in three mediums but if differs according to speed as it travels fastest in solid,faster in liquid and slow in gases.
hope it helps u and keep smiling :)
please help
How many grams of barium sulfate are present in 250 of 2.0 M BaS04 solution?
Answer: There are 0.5 grams of barium sulfate are present in 250 of 2.0 M [tex]BaSO_{4}[/tex] solution.
Explanation:
Given: Molarity of solution = 2.0 M
Volume of solution = 250 mL
Convert mL int L as follows.
[tex]1 mL = 0.001 L\\250 mL = 250 mL \times \frac{0.001 L}{1 mL}\\= 0.25 L[/tex]
Molarity is the number of moles of solute present in liter of solution. Hence, molarity of the given [tex]BaSO_{4}[/tex] solution is as follows.
[tex]Molarity = \frac{mass}{Volume (in L)}\\2.0 M = \frac{mass}{0.25 L}\\mass = 0.5 g[/tex]
Thus, we can conclude that there are 0.5 grams of barium sulfate are present in 250 of 2.0 M [tex]BaSO_{4}[/tex] solution.
The student then sets up two more test tubes containing iron nails.
Explain why
test tube 1 does not rust because boiled water has no oxygen and oil stops new oxygen from entering and without oxygen iron cannot rust.
test tube 2 does not rust because the drying agent absorbs all the moisture from air, and moisture is required for iron to rust.
In the absence of oxygen or moisture rusting of the nail can not take place.
There are two very important things that must be present for the process of rusting to take place these are;
Oxygen MoistureIf we can exclude these two, rusting will not take place in the absence of either of them.
Rusting does not occur in tube 1 because the water have been boiled and the oxygen removed then it is stored under oil that prevents corrosion.
In tube 2, there is a drying agent that removes moisture from air hence moisture does not have access to the nail so it does not rust.
Learn more about rusting: https://brainly.com/question/4206267
8. What is the volume of 5.6 moles of carbon dioxide gas at STP?
Answer:
125.5 ×10^-3 m^3= 0.1255 m^3
Explanation:
Volume=5.6mol×22.414dm^3
=125.5dm^3
Energy is generally released when fuel is burn with oxygen. Predict the disadvantages of burning fuels especially hydrocarbons like petrol, diesel, to the environment.
help me please:(
Answer:
It adds waste and also removes valuable recources that can't be naturally renewed. It also releases toxins and gas...
Explanation:
I don't reallly have an explenation so...
Acetylene, C2H2 (also known as ethyne), is commonly used as a fuel for welding torches.
a. True
b. False
Answer:
True
Explanation:
Acetylene or Ethyne is the simples form of hydrocarbon with triple bond in it. It is the first member of alkyne series. It colorless, highly inflammable gas. This is why is used in oxy-acetylene torches used for welding and cutting materials. It is also used as raw material in synthesis of many organic chemicals and plastics.
So, the given statement is true.
Define "mole in chemistry terms
Answer:
Can you please post a pictah.
Explanation:
Answer: A mole is defined as 6.02214076 × 1023 of some chemical unit, be it atoms, molecules, ions, or others. The mole is a convenient unit to use because of the great number of atoms, molecules, or others in any substance.
Consider the substances in the reaction: Uranium-235, Krypton-93, and Barium-140. The values of “235”, “93”, and “140” all represent what characteristic of the elements?
Answer:
Relative atomic mass
Explanation:
What is the change in temperature when 75 grams of water releases -2657 J of energy? The specific heat of water is 4.18 J/g°C
A neutral atom with the electron configuration 2-7 would most likely form a bond with an atom having the configuration
Answer:
1s2 2s2
Explanation:
How much water needs to be added to 27.00 millilters of 1.500 M LiOH solution to make a 0.02000 M LiOH solution?
Answer:
3000000000000009000000
what class is sodiumtrioxocarbonate(IV) strong or weak base and why?
Answer:
Strong base
Explanation:
Anhydrous sodiumtrioxocarbonate(IV) Na2CO3 and crystalline sodiumtrioxocarbonate(IV) Na2CO3 are two forms of sodiumtrioxocarbonate(IV) Na2CO3. The Solvay process is the most common name for the sodiumtrioxocarbonate(IV) Na2CO3 production process.
Still, as Na2CO3 reacts, it produces CO3. That tends to be a weak acid's conjugate base. As a result of the removal of H+, carbonic acid was formed (Strong Base)
Use the image below to help you answer this question: Your friend has a red laser pointer. What would happen to the light coming from the laser pointer if it's wavelength were to increase (decrease its frequency).Single choice. (1 Point)
a The light would shift towards the color blue
b The light would no longer be visible to the human eye
c The light would be brighter
d The light would be less bright
Answer:
the light would be less bright
Explanation:
What volume, in milliliters,
Answer:
25.4
Explanation:
PLZ mark me brainlist
Students in a robotics class designed cars to race as their end of the year project. Students collected data on their cars and compared their individual data before the final race. The mass and the force applied to each car is recorded in the table below. Based on this information which car has the greatest acceleration? *
What happens in a chemical reaction?
А
Substances change in appearance but not in chemical composition.
B
Substances change from solid to liquid or gas.
с
Substances interact to form one or more new substances.
D
New atoms are created or destroyed.
Answer:
c seems like the best answer
A solution has a pH of 10.
What is the concentration of hydrogen ions?
In each of the molecules drawn below one chemical bond is colored red. Decide whether this bond is likely to be polar or not. If the bond is likely to be polar, write down the chemical symbol for the atom which will have more negative charge. The highlighted bond is polar and the more negative atom is The highlighted bond is nonpolar. The highlighted bond is polar and the more negative atom is The highlighted bond is nonpolar. The highlighted bond is polar and the more negative atom is The highlighted bond is nonpolar.
The question is incomplete, the complete question is shown in the image attached to this answer
Answer:
See Explanation
Explanation:
I want us to bear something in mind. A compound is polar when there is a considerable difference in electronegativity between two bonding atoms in the molecule.
The implication of this is, the shared electron pair of the bond will be closer to the atom of greater electronegativity than the atom of lesser electronegativity thereby creating a dipole in the molecule.
Let us consider each of the compounds;
For Cl-F, the highlighted bond is polar and F is the more electronegative atom
For H-Br, the highlighted bond is polar and Br is the more electronegative atom
For N≡N, the highlighted bond is nonpolar since it is a homonuclear diatomic molecule.
How many grams of sodium do I need to react with chlorine to make 20g of sodium chloride
Explanation:
Na=23
cl2=35.5×2=71
NaCl=23+35.5=58.5
2Na + Cl2== 2NaCl
2. : 1
20/23=2(x)/71
(71×20)/(23×2)=x
x=30.87g
q = (100g) (4.184 J/g°C) (40-26) degrees C. Show how you solved for q (in Joules) here:
Answer:
5857.6 J
Explanation:
Everything is in the correct units so solve normally
q= 100*4.184*14
q= 418.4*14
q= 5857.6 J
which statement compares the strengths of electric forces between particles of matter?
A. Hydrogen bonds and metallic bonds are stronger than ionic bonds.
B. Van der Waals forces and hydrogen bonds are stronger than metallic bonds.
C. Ionic bonds and Van der Waals forces are stronger than metallic bonds.
D. Van der Waals forces and hydrogen bonds are weaker than metallic bonds.
Answer: A
Explanation: I quizzed
how many moles are in 150 grams of MgO?
Answer:
40.3044 grams.
Explanation:
Please mark brainliest
Please solve I will give brainliest to correct answer
Answer:
-846 kJ
Explanation:
Using Henderson Hasselbach's law,
2Al + 3/2 O2 -> Al2O3 H = -1670 kJ
-(2Fe + 3/2 O2 -> Fe2O3) = Fe2O3 -> 2Fe + 3/2 O2 H = 824 kJ
-1670 kJ + 824kJ = -846 kJ
What is the mass in grams of 2.00 10 5 atoms of naturally occurring neon
Answer:
2.00X10^5 x 20gNe/6.02x10^23=6.46x10^-18 but books answer is 797.
Explanation:
The mass is grams 2.00 x 10⁵ atoms of naturally occurring neon is 6.70 x 10⁻¹⁸g.
What is neon?Neon is a chemical element in the periodic table. Its atomic number is 10, and it is a Nobel gas. It is a colorless, monatomic, and odorless gas.
Mass is the quantity of matter in a physical body. It can be calculated by the volume and density of the element. The mass can be calculated by the number of atoms.
Given the number of atoms of Ne is 2.00 x 10⁵
The molar mass Ne = 20.18 g/mol
6.022 x 10²³ Ne atoms have a mass of 20.18 g.
The number of atoms is divided by the Avogadro number and the mass of the element.
2.00 x 10⁵ atoms Ne has mass = (2.00*10⁵) / (6.022*10²³) x 20.18 g =
6.70 x 10⁻¹⁸g.
Thus, the mass is grams 2.00 x 10⁵ atoms is 6.70 x 10⁻¹⁸g.
To learn more about neon, refer to the link:
https://brainly.com/question/5605139
#SPJ2
molar mass (NH4)2SO4
Answer:
132.15
Explanation:
Molar mass N = 14.00
Molar mass H = 1.01
Molar mass H4 = 1.01 x 4 = 4.04
Molar mass NH4 = 14.00 + 4.04 = 18.04
Molar mass (NH4)2 = 18.04 x 2 = 36.08
Molar mass S = 32.07
Molar mass O = 16.00
Molar mass O4 = 16.00 x 4 = 64.00
Molar mass SO4 = 32.07 + 64.00 = 96.07
Molar mass (NH4)2SO4 = 36.08 + 96.07 = 132.14
g Alkenes and alkynes are called unsaturated compounds because ________. they have fewer hydrogen atoms attached to the carbon chain than alkanes they have fewer carbon atoms than alkanes they have the maximum number of hydrogen atoms attached to each carbon in the compound they have more carbon atoms than alkanes they have more hydrogen atoms attached to the carbon chain than alkanes
Answer:
They have fewer hydrogen atoms attached to the carbon chain than alkanes
Explanation:
Let's compare ethane (an alkane) with ethene (an alkene) and ethyne (an alkyne):
Ethane's formula is C₂H₄, while ethene's is C₂H₄ and ethyne's C₂H₂.As you can see, alkenes and alkynes have fewer hydrogen atoms attached to the carbon chain due to them having multiple bonds between the carbon atoms.
What is the difference between gases and nonmetal?
Answer:
1) some of the gas maybe metal but non metal directly refers it self to not begin metal
2) gases are present in only air . non metals are available in solid form too