Answer: A material that does not easily allow a charge to pass through it is called an Plastic and rubber are good insulators. Many types of electric wire are covered with plastic, which insulates well. The plastic allows a charge to be conducted from one end of the wire to the other, but not through the sides of the wire.
Explanation:
Imagine that you drop an object of 10 kg, how much will be the acceleration and
how much force causes the acceleration?
If you do this on Earth, then the acceleration of the falling object is 9.8 m/s^2 ... NO MATTER what it's mass is.
If its mass is 10 kg, then the force pulling it down is 98.1 Newtons. Most people call that the object's "weight".
QUESTION 13
Marci would describe almost a perfect person whenever her friends would ask her who she thought was
her ideal life partner. This "perfect" person would be ain)
O a prototype
b.reinforcer
oc. anagram
d. heuristic
A 300 g object attached to a horizontal spring moves in simple harmonic motion with a period of 0.340 s. The total mechanical energy of the spring–object system is 3.00 J.
(a) What is the spring constant (in N/m)?
(b) What is the amplitude (in m) of the motion?
(c) What is the percentage change in amplitude of motion if the total energy of the system is increased to 5.00 J?
Answer:
Explanation:
angular velocity ω = 2π / T where T is time period of rotation .
= 2 x 3.14 / .34 = 18.47 rad /s
Total mechanical energy = 1/2 m ω²Α² where A is amplitude .
spring constant = k
[tex]\omega=\sqrt{\frac{k}{m} }[/tex]
m is mass
[tex]\omega^2=\frac{k}{m} }[/tex]
18.47² = k / .3
k = 102.34 N /m
b )
energy = 1/2 m ω²Α²
3 = .5 x 18.47² x A²
A² = .01759
A = .1326
13.26 cm .
c )
If energy becomes 5 J
5 = .5 x 18.47² x A²
A² = .0293
A = .1711
= 17.11 cm
percent increase
= (17.11 - 13.26 )x100 / 13.26
= 29%
When living things use chemical reactions to break down food, some of the energy is transformed into
OA. sound.
OB. heat.
OC. light
OD.waste
waste.
Answer:
OB. Heat
Explanation:
I hope this helped :)
When water changes from a gas in the atmosphere to a liquid droplet in a cloud, this is known as
Group of answer choices
transpiration
condensation
evaporation
precipitation
Answer:
Condensation
Explanation:
Answer:When water changes from a gas in the atmosphere to a liquid droplet in a cloud, this is known as
Group of answer choices
transpiration
condensation
evaporation
precipitation,←, that one is right
Explanation: so ur answer is precipitation
A train leaves Houston and travels north at 65km/h. After it travels 150km, it turns left and travels 60km towards the west at 55km/h.
What is the total distance that the train traveled?
Answer:
210km
Explanation:
Given parameters:
Distance traveled northward = 150km
Distance traveled westward = 60km
Unknown:
Total distance traveled by the train = ?
Solution:
Distance is the total length of path traveled by a body.
Total distance = distance traveled northward + distance traveled westward
Total distance = 150km + 60km = 210km
Answer:
210 km
Explanation:
Traveled 150 km north
Traveled 60 km west
150 + 60 = 210 km for distance traveled
If a car traveled 50 meters in 2 seconds, what will the velocity be? (Write the answer with a number, on decimal if needed, then a space and the units, for example 5.7 m/s)
Answer:
The answer is 25 m/sExplanation:
The velocity of the car can be found by using the formula
[tex]v = \frac{d}{t} \\ [/tex]
d is the distance
t is the time taken
From the question we have
[tex]v = \frac{50}{2} \\ [/tex]
We have the final answer as
25 m/sHope this helps you
Q17: The coefficient of linear expansion of steel is a = 11 x 10-6 / °C. A steel
ball has a volume of exactly 100 cm3 at 0°C. When heated to 100°C, its
volume becomes in (cm3):
A
B
D
E
100.33
100.11
100.0011
100.0033
None of them
Solution:
The coefficient of volume expansion
p = ΔV/V1Δt
3a = V2-V1/V1Δt
Given
a = = 11 x 10-6 / °C
V2 is the final volume
V1 is the initial volume = 100cm³
Δt = 100-0 = 100°C
Substitute
3(11 x 10-6) = V2-100/100(100)
33*10^-6 * 10000 = V2-100
33*10^-2 = V2-100
V2 = 100 + 0.33
V2 = 100.33
Hence the new volume is 100.33cm³
Is a compound considered a pure substance?
Answer:
It depends on which compound you use carbon dioxide can be while helium will not but if you where to sum it up it would be use because simply most compounds are considered pure substance.
Explanation:
A carbon ion with 10 electrons and 6 protons would have a charge of ?
Answer:
-4
Explanation:
Electrons are negative while protons are positive.
To find the charge, add the number of protons to the number of electrons.
6+(-10)
6-10
-4 is the charge
The Amazon rainforest has millions of trees down in South America. Pantanal, the largest wetland, or swamp, on Earth sits directly below the Amazon on a map. Explain this phenomenon using processes from the water cycle.
The subject is science just to let you know.
Answer:The Pantanal is, when the season changes of the river flow, the pantanal shrinks after a few river channels The amazon rainforest has a lot of trees.The vapor rises and condenses it into clouds.Water leaves the forest and comes back, the amazon leaves itself.If the amazon water was not to go by itself everything would be different.
Answer:
Nine, Brazil, Venezuela
Explanation:
A pendulum is transported from sea-level, where the acceleration due to gravity g is 9.80 m/s2, to the bottom of Death Valley. At this location, the period of the pendulum is decreased by 3.00%. What is the value of g in Death Valley
Answer: the value of g in Death Valley is 10.417 m/s²
Explanation:
Given that;
acceleration due to gravity at the point is g = 9.8 m/s²
Lets say the acceleration due to gravity at the bottom of Death valley is g'
as the period of the pendulum is decreased by 3.00%
T' = 0.97 T
T is the period of the pendulum at sea level and T' is the period of the pendulum at bottom of Death valley
therefore from the relation
T = 2π√(l/g)
g'/g = T²/T'²
g' = (T²/ (0.97T)²)g
g' = 1.063g
g' = 10.417 m/s²
therefore the value of g in Death Valley is 10.417 m/s²
if an object is moving with a velocity of 25m/s, an acceleration of 5m/s and has a travel time of 5s, what is the final velocity of the object?
V = at + V0
where v0 is the initial speed, a is the acceleration and t is the time.
So:
v = 5m/s^2*5s + 25m/s = 50 m/s
When electrons are gained, a ion is formed.
Answer:
Ions are formed when atoms lose or gain electrons in order to fulfill the octet rule and have full outer valence electron shells. When they lose electrons, they become positively charged and are named cations. When they gain electrons, they are negatively charged and are named anions.
Explanation: CAN I RECEIVE A BRAINLIEST PLEASE
4). A basketball player shoots the ball in the air. It moves through the air
at 20 m/s and travels 25m. How long was the ball in the air? *
Let's start from this equation:
s = vt + s0
Know what it is? Of course you do. It's the equation used for knowing the position of an object in a certain period of time t.
s is space, v is speed, t is time, s0 is the initial space.
In this case the initial space is equal to 0 so our equation will become:
s = vt
Let's find t:
t = s/v
So:
t = 25m/20m/s = 1,25 s
---
Hope it was helpful. Have a great day!
What is the mechanical advantage of a nail puller where you exert a force 45 cm from the pivot and the nail is 1.8 cm on the other side? What minimum force must you exert to apply a force of 1250 N to the nail?
Answer:
Explanation:
Mechanical Advantage is the ratio of the distance of the input load (Li)from the pivot to the output load applied to the pivot(Lo)
MA = Li/Le
Given;
Li = 45cm
Lo = 1.8cm
MA = 45/1.8
MA = 25
Hence the mechanical advantage is 25
Also MA is expressed in terms of the force ratio which is the ratio of the Load to the effort applied.
MA = Load/Effort
Given
Load = 1250N
MA = 25
Effort = ?
Substitute
25 = 1250/Effort
Effort = 1250/25
Effort = 50N
Hence the minimum force exerted on the load is 50N
A student builds an electromagnet using a battery, an iron nail, and some insulated wire. The wire is wrapped around the nail 50 times, then connected to the
battery. What changes could the student make to increase the strength of the electromagnet?
1. wrap more wire around the nail
2. increase the voltage of the battery
3. use a switch to turn the electromagnetic on and off
4. increase the size of the nail
A. 1 and 2
B. 2 and 4
C. 1,2 and 4
D. 1,2,and 3
Answer:
a
Explanation:
its right
To increase the electromagnet's strength, the student must enlarge the nail, wrap more wire around the nail, and increase the voltage of the battery. Option c is the correct answer.
How does an electromagnet work?The mechanics of an electromagnet are not overly complicated. It is accomplished by wrapping a length of conductive wire, usually copper, around a metal object.Until electricity is introduced, this appears to be nothing more than a jumbled collection of parts, similar to Frankenstein's monster. An electromagnet, on the other hand, does not require a storm to be activated. A current is introduced and flows through the wire, which can come from a battery or another source of power.As a result of the magnetic field created around the coiled wire, the metal is magnetized as if it were a permanent magnet. Electromagnets are useful because they can be activated and deactivated by closing and opening a circuit.To learn more about electromagnet, refer to
brainly.com/question/7382276
#SPJ2
When a balloon is rubbed on a surface and then touched to hair it will attract the hair, causing it to stick to the balloon. Explain why this happens.
Answer:
electricity
Explanation:
Answer:
This is called static electricity
Explanation:
The reasoning behind this is because the negative electrons in your hair are being transferred to the balloon, then when the balloon is removed it pulls on the hair with an attractive electric force.
A child sits on a merry-go-round, 1.5 meters from the center. The merry-go-round is turning at a constant rate, and the child is observed to have a radial acceleration of 2.3 m/s2. How long does it take for the merry-go-round to make one revolution
Answer:
5 .07 s .
Explanation:
The child will move on a circle of radius r
r = 1.5 m
Let the velocity of rotation = v
radial acceleration = v² / r
v² / r = 2.3
v² = 2.3 r = 2.3 x 1.5
= 3.45
v = 1.857 m /s
Time of revolution = 2π r / v
= 2 x 3.14 x 1.5 / 1.857
= 5 .07 s .
The merry-go round will take 5.07 s to complete one complete revolution.
Given data:
The distance of child from the center is, r = 1.5 m.
The magnitude of radial acceleration is, [tex]a = 2.3 \;\rm m/s^{2}[/tex].
Since, the child is on merry-go round, which is undergoing a rotational motion. And radial acceleration means that it is under the acceleration, whose value is given as,
[tex]a=\dfrac{v^{2}}{r}\\\\v=\sqrt{a \times r}[/tex]
Here, v is the linear velocity.
Solving as,
[tex]v=\sqrt{2.3 \times 1.5} \\\\v=1.857 \;\rm m/s[/tex]
Now, we to obtain the time taken by merry-go round to complete one revolution. Then the expression for the time taken to complete one revolution is,
[tex]T=\dfrac{2 \pi r}{v}\\\\T=\dfrac{2 \pi \times 1.5}{1.857}\\\\T = 5.07 \;\rm s[/tex]
Thus, we can conclude that the merry-go round will take 5.07 s to complete one revolution.
Learn more about the centripetal acceleration here:
https://brainly.com/question/14465119
Which statement correctly describes the diferences between positive and negative acceleration
O Positive acceleration describes a change in speed, negative acceleration desxibes no change in speed,
Positive acceleration describes no change in speed, negative acceleration desibes a change in speed,
Positive acceleration describes an increase in speed, negative sexeleration desnibes a decrease in speed
O Positive acceleration describes a decrease in speed, negative sideration describes an increase in sarees
Answer:The answer is this Positive acceleration describes an increase in speed, negative sexeleration desnibes a decrease in speed
Explanation:
Someone help me please it’s urgent
11. How fast will a pebble be traveling 3 seconds after being dropped? (g = 9.8 m/s2)
A.-9.8 m/s
B.29.4 m/s
C.9.8 m/s2
D.29.4 m/s
How long will it take a 2190 W motor to lift a 1.47 x 104 g box, 6.34 x 104 mm vertically.
Answer:
4.2s
Explanation:
Given parameters:
Power = 2190W
Mass of box = 1.47 x 10⁴g
distance = 6.34 x 10⁴mm
Unknown:
Time = ?
Solution:
Power is the rate at which work is done;
Mathematically;
Power = [tex]\frac{work done}{time}[/tex]
Time = [tex]\frac{work done}{power}[/tex]
Work done = weight x height
convert mass to kg;
100g = 1kg;
1.47 x 10⁴g = 14.7kg
convert the height to m;
1000mm = 1m
6.34 x 10⁴mm gives 63.4m
Work done = 14.7 x 9.8 x 63.4 = 9133.4J
Time taken = [tex]\frac{9133.4}{2190}[/tex] = 4.2s
Which is NOT a property of the organisms that have become useful index fossils
Answer: I dont understand
Explanation:
1. A person weighs 155 lbs and is walking 3.1 miles per hour. How much kinetic energy does the person have? (Keep in mind, 1 kg is 2.2 lb, and 1 m/s is 2.24 mi/h.)2. What is the kinetic energy of a 5 g bullet travelling 400 m/s?
3. Is it possible to have a negative KE? Why or why not?
Answer:
Explanation:
Kinetic energy is expressed as;
KE =1/2 mv²
M is the mass
v is the velocity of the object
1) Given
Mass = 155lb
Velocity = 3.1mi/hr
Since 1kg = 2.2lb
x = 155lb
x= 155/2.2
x = 70.45kg
Also
1m/s = 2.24mi/hr
y = 3.1mi/hr
y = 3.1/2.24
y = 1.384m/s
KE = 1/2(70.45)(1.384)²
KE = 0.9577×70.45
KE = 67.47Joules
2) M = 5g =0.005kg
V = 400m/s
KE = 1/2(0.005)400²
KE = 80000×0.005
KE = 400Joules
3} Since a body decelerates (negative acceleration) this mean that the velocity of a body can be a negative value showing that it is possible for a moving body to possess negative kinetic energy.
angle of reflection
The angle of reflection equals the angle of Incidence
Explanation:
The Law Of Reflection
Explain the procedures used and data recorded to identify a crystalline mineral based on its properties.
Answer:
By examining its external shape, color, hardness, etc.
Explanation:
Which of these is a base?
HNO3
vinegar
ammonia
HCl
The correct answer is Ammonia
g What is the separation between their paths in meters when they hit a target after traversing a semicircle
Answer:
vm/B•q
Explanation:
The charge to mass ratio of any given particle, can be determined by using the formula
q/m = E/BB•R,
From the aforelisted formula,
Both E and B are the fields in the velocity selector.
B• is the magnetic field used to separate particles
R is the radius of the path of the particle.
Now, we rearrange by making R the subject of the formula, so that
R = Em/BB•q
In trying to find the velocity of the particles coming out of the velocity selector, we realize that
v = E/B, and when we substitute for this in the previous equation, we have
R = vm/B•q
True or False. A compound is formed when two or more elements are combined to make a
new substance with its own properties.
Anyone?
Answer:
I believe It's true. Since from memory I KNOW a compound is formed when elements are combined chemically.
Answer: correct
Explanation: a compound is 2 or more elements formed to make a completely new thing. For example, water is a compound. Why? Well, water is h20. What is h20? It’s Hydrogen and Oxygen. Oxygen is also a compound. Another example is CO2 (carbon dioxide) it’s made of carbon and oxygen, so it’s a compound! A element is just a pure substance. It’s not made up of other materials. It’s in its purest form.