The volume at 35°C is approximately 69.86 liters
The solution to the problem: "A mass of gasoline occupies 70.01 at 20°C. the volume at 35°C" is given below:Given,M1= 70.01; T1 = 20°C; T2 = 35°CVolume is given by the formula, V = \frac{m}{ρ}
Volume is directly proportional to mass when density is constant. When the mass of the substance is constant, the volume is proportional to the density. As a result, the formula for calculating density is ρ= \frac{m}{V}.Using the formula of density, let's find out the volume of the gasoline.ρ1= m/V1ρ2= m/V2We can also write, ρ1V1= ρ2V2Now let's apply the values in the above formula;ρ1= m/V1ρ2= m/V2
ρ1V1= \frac{ρ2V2M1}{ V1} = ρ1 (1+ α (T2 - T1)) V1V2 = V1 / (1+ α (T2 - T1)) Given, M1 = 70.01; T1 = 20°C; T2 = 35°C
Therefore, V2 = \frac{V1 }{(1+ α (T2 - T1))V2}=\frac{ 70.01}{(1 + 0.00095 * 15) } [α for gasoline is 0.00095 per degree Celsius]V2 = 69.86 liters (approx)
Hence, the volume at 35°C is approximately 69.86 liters.
learn more about density Refer: https://brainly.com/question/32242821
#SPJ11
The net force on any object moving at constant velocity is a. equal to its weight. b. less than its weight. c. 10 meters per second squared. d. zero.
The net force on any object moving at constant velocity is zero. Option d. is correct .
An object moving at constant velocity has balanced forces acting on it, which means the net force on the object is zero. This is due to Newton's First Law of Motion, which states that an object in motion will remain in motion with the same speed and direction unless acted upon by an unbalanced force. This is due to Newton's first law of motion, also known as the law of inertia, which states that an object at rest or in motion with a constant velocity will remain in that state unless acted upon by an unbalanced force.
When an object is moving at a constant velocity, it means that the object is not accelerating, and therefore there must be no net force acting on it. If there were a net force acting on the object, it would cause it to accelerate or decelerate, changing its velocity.
Therefore, the correct answer is option (d) - the net force on any object moving at a constant velocity is zero.
To know more about Net force refer here :
https://brainly.com/question/14361879
#SPJ11
What is the significance of the dog's final movement towards civilization at the end of the story? what does this suggest about the dog's relationship to nature? is instinct driving this movement?
In Jack London's "To Build a Fire," the dog's final movement towards civilization is significant because it suggests that the dog recognizes the dangers of the natural world and has a desire to seek safety and security in human civilization.
This movement highlights the dog's intelligence and adaptation to its environment. It also suggests that the dog's relationship to nature is one of survival and instinct.
The dog is not driven by a conscious decision to seek civilization, but rather by a primal instinct to survive. This reinforces the theme of the harsh and unforgiving nature of the Yukon wilderness, where only the strongest and most adaptable can survive.
Overall, the dog's movement towards civilization symbolizes the tension between nature and civilization, and the struggle for survival in a hostile environment.
To learn more about movement, refer below:
https://brainly.com/question/2856566
#SPJ11
Consider three identical metal spheres, a, b, and c. sphere a carries a charge of 5q. sphere b carries a charge of -q. sphere c carries no net charge. spheres a and b are touched together and then separated. sphere c is then touched to sphere a and separated from it. lastly, sphere c is touched to sphere b and separated from it.
required:
a. how much charge ends up on sphere c?
b. what is the total charge on the three spheres before they are allowed to touch each other?
a. Sphere c ends up with a charge of -3q.
b. The total charge on the three spheres before they are allowed to touch each other is 5q - q = 4q.
a. When spheres a and b are touched together and then separated, charge is transferred between them until they reach equilibrium. Since sphere a has a charge of 5q and sphere b has a charge of -q, the total charge transferred is 5q - (-q) = 6q. This charge is shared equally between the two spheres, so sphere a ends up with a charge of 5q - 3q = 2q, and sphere b ends up with a charge of -q + 3q = 2q.
When sphere c is touched to sphere a and separated, they share charge. Sphere a has a charge of 2q, and sphere c has no net charge initially. The charge is shared equally, so both spheres end up with a charge of q.
Similarly, when sphere c is touched to sphere b and separated, they also share charge. Sphere b has a charge of 2q, and sphere c has a charge of q. The charge is shared equally, so both spheres end up with a charge of (2q + q) / 2 = 3q/2.
Therefore, sphere c ends up with a charge of -3q (opposite sign due to excess electrons) and the total charge on the three spheres before they are allowed to touch each other is 5q - q = 4q.
learn more about spheres here:
https://brainly.com/question/22849345
#SPJ11
What is the absolute magnitude of the reduction in the variation of Y when times is introduced into the regression model? What is the relative reduction? What is the name of the latter measure?
1. The absolute magnitude of the reduction in variation of Y when time is introduced into the regression model can be calculated by subtracting the variance of Y in the original model from the variance of Y in the new model.
2. The relative reduction can be calculated by dividing the absolute magnitude by the variance of Y in the original model.
3. The latter measure is called the coefficient of determination or R-squared and represents the proportion of variance in Y that can be explained by the regression model.
When time is introduced into a regression model, it can have an impact on the variation of the dependent variable Y. The absolute magnitude of this reduction in variation can be measured by calculating the difference between the variance of Y in the original model and the variance of Y in the new model that includes time. The relative reduction in variation can be calculated by dividing the absolute magnitude of the reduction by the variance of Y in the original model.
The latter measure, which is the ratio of the reduction in variation to the variance of Y in the original model, is called the coefficient of determination or R-squared. This measure represents the proportion of the variance in Y that can be explained by the regression model, including the independent variable time. A higher R-squared value indicates that the regression model is more effective at explaining the variation in Y.
To know more about magnitude visit:
brainly.com/question/2596740
#SPJ11
A race track is in the shape of an ellipse 80 feet long and 60 feet wide. what is the width 32feet from the center?
The equation for an ellipse centered at the origin with semi-major axis a and semi-minor axis b is:
[tex]x^2/a^2 + y^2/b^2 = 1[/tex]
In this problem, the ellipse has dimensions of 80 feet by 60 feet. Since the center is not specified, we can assume that the center is at the origin. Thus, the equation of the ellipse is:
[tex]x^2/40^2 + y^2/30^2 = 1[/tex]
We want to find the width 32 feet from the center, which means we need to find the height of the ellipse at x = 32. To do this, we can rearrange the equation of the ellipse to solve for y:
[tex]y = ±(1 - x^2/40^2)^(1/2) * 30[/tex]
Since we are only interested in the positive value of y, we can simplify this to:
[tex]y = (1 - x^2/40^2)^(1/2) * 30[/tex]
Substituting x = 32, we get:
y = (1 - 32^2/40^2)^(1/2) * 30
y = (1 - 256/1600)^(1/2) * 30
y = (1344/1600)^(1/2) * 30
y = 0.866 * 30
y = 25.98
Therefore, the width 32 feet from the center is approximately 25.98 feet.
To know more about refer ellipse centered here
brainly.com/question/27603973#
#SPJ11
Calculate the angular separation of two Sodium lines given as 580.0nm and 590.0 nm in first order spectrum. Take the number of ruled lines per unit length on the diffraction grating as 300 per mm?
(A) 0.0180
(B) 180
(C) 1.80
(D) 0.180
The angular separation of two Sodium lines is calculated as (C) 1.80.
The angular separation between the two Sodium lines can be calculated using the formula:
Δθ = λ/d
Where Δθ is the angular separation, λ is the wavelength difference between the two lines, and d is the distance between the adjacent ruled lines on the diffraction grating.
First, we need to convert the given wavelengths from nanometers to meters:
λ1 = 580.0 nm = 5.80 × 10⁻⁷ m
λ2 = 590.0 nm = 5.90 × 10⁻⁷ m
The wavelength difference is:
Δλ = λ₂ - λ₁ = 5.90 × 10⁻⁷ m - 5.80 × 10⁻⁷ m = 1.0 × 10⁻⁸ m
The distance between adjacent ruled lines on the diffraction grating is given as 300 lines per mm, which can be converted to lines per meter:
d = 300 lines/mm × 1 mm/1000 lines × 1 m/1000 mm = 3 × 10⁻⁴ m/line
Substituting the values into the formula, we get:
Δθ = Δλ/d = (1.0 × 10⁻⁸ m)/(3 × 10⁻⁴ m/line) = 0.033 radians
Finally, we convert the answer to degrees by multiplying by 180/π:
Δθ = 0.033 × 180/π = 1.89 degrees
Rounding off to two significant figures, the answer is:
(C) 1.80
To know more about angular separation, refer
https://brainly.com/question/30365113
#SPJ11
compared with compounds such as sodium chloride, the wax produced by bees has a low boiling point. which best explains this property of beeswax?
The low boiling point of beeswax is a result of its chemical composition, which is different from that of ionic compounds such as sodium chloride, as well as its natural function in the hive.
The low boiling point of beeswax compared to compounds such as sodium chloride can be attributed to its chemical composition. Beeswax is a complex mixture of hydrocarbons, fatty acids, and esters that have a relatively low molecular weight and weak intermolecular forces between the molecules.
This results in a lower boiling point compared to ionic compounds like sodium chloride, which have strong electrostatic attractions between the ions and require a higher temperature to break these bonds and vaporize.
Additionally, beeswax is a natural substance that is produced by bees and is intended to melt and flow at relatively low temperatures to facilitate their hive construction. As a result, it has evolved to have a lower boiling point to enable it to melt and be manipulated by the bees.
For more such questions on chemical composition:
https://brainly.com/question/678196
#SPJ11