Based on the incremental rate of return analysis, the best project would be Project A1. The correct answer is option A.
Proposal Required Investment Savings
A1 $70.000 $22,000
A2 $95.000 $24.000
A3 $110,000 $31.500
A4 $130,000 $32.600
A5 $135,000 $36.400
A6 $145,000 $40.500
MARR = 22%
As per the Incremental rate of return analysis, we calculate the Incremental rate of return of each proposal. We can see that,Each proposal has a 10 years life and Zero Salvage Value.
The best proposal should have the highest incremental rate of return in comparison to other proposals. To calculate incremental rate of return we will use the following formula:
Incremental Rate of Return = Additional cash inflows / Additional cash outflows x 100%
On calculation of incremental rate of return, we can get the below results:
Proposal Additional cash inflows Additional cash outflows Incremental Rate of Return
A1 $22,000 $70,000 31.43%
A2 $24,000 $95,000 25.26%
A3 $31,500 $110,000 19.09%
A4 $32,600 $130,000 19.69%
A5 $36,400 $135,000 18.52%
A6 $40,500 $145,000 17.93%
On observing the above table, we can conclude that the proposal with highest incremental rate of return is A1 i.e. 31.43%. Therefore, Option A is correct.
To know more about incremental rate of return, visit https://brainly.com/question/15289825
#SPJ11
You own a mutual fund valued at $46 per share. It has a gross return of 8% and an expense ratio of 1.0%. Your share's real worth based upon the given information is
Based on the given information of owning a mutual fund valued at $46 per share, with a gross return of 8% and an expense ratio of 1.0%, the real worth of your share can be calculated by adjusting for the expense ratio.
To determine the real worth of your share, we need to subtract the expense ratio from the gross return to obtain the net return. The net return represents the actual growth in the value of your investment after deducting the expenses.
The expense ratio is 1.0%, which means that 1.0% of the investment's value is deducted as expenses. Subtracting the expense ratio of 1.0% from the gross return of 8% gives us a net return of 7%.
To calculate the real worth of your share, we multiply the net return of 7% by the initial value of $46 per share:
Real worth = $46 + ($46 * 7%) = $46 + ($46 * 0.07) = $46 + $3.22 ≈ $49.22
Therefore, based on the given information, the real worth of your mutual fund share is approximately $49.22.
Learn more about mutual fund here:
https://brainly.com/question/31240480
#SPJ11
Public sector procurement or government procurement is often highly regulated. In Singapore, the Ministry of Finance (MOF) sets out the policy framework for Government Procurement (GP). The GP framework is based on principles of fairness, transparency and value-for-money (VFM) purchases to ensure public accountability.
(a) Illustrate the needs for Supplier Relationship Management in government procurement. (10 marks)
(b) Take an example of an organisation that you are currently working for or you are familiar with. Prepare the different Supplier Relationship Management strategies which might be effective for the organisation to achieve their organisational goals.
a) Public sector Cor government procurement is often highly regulated due to several reasons. One of the major reasons is the need to ensure value for money and a level playing field for all vendors. In Singapore, the Ministry of Finance (MOF) sets out the policy framework for Government Procurement (GP) which is based on principles of fairness, transparency and value-for-money (VFM) purchases to ensure public accountability.
In this context, Supplier Relationship Management (SRM) is necessary in government procurement to ensure the selection of vendors that can provide high-quality goods and services at competitive prices over an extended period.
The following are the needs for Supplier Relationship Management in government procurement:
i. Building long-term partnerships and collaborations with key suppliers to reduce the total cost of ownership and improve quality over time.
ii. Ensuring consistent supplier performance through regular monitoring, evaluation and feedback.
iii. Enhancing the efficiency and effectiveness of procurement operations by minimizing risks, avoiding disputes, and streamlining procurement processes.
iv. Managing supplier relationships strategically to enable procurement organizations to become more agile, resilient, and responsive to changing business needs.
b) An example of an organization that I am familiar with is XYZ Company. This is a manufacturing company that produces various types of electronic goods such as laptops, desktops, smartphones, and other devices. The company procures a wide range of components, raw materials, and services from various suppliers across the globe. To achieve their organizational goals, the company can adopt the following Supplier Relationship Management strategies:
i. Partnering with key suppliers: XYZ Company can build long-term partnerships with its key suppliers to develop a mutually beneficial relationship. This can help to reduce costs, improve quality, and increase innovation over time.
ii. Measuring supplier performance: XYZ Company can set performance metrics for its suppliers and regularly monitor and evaluate their performance. This can help to ensure consistent quality, timely delivery, and adherence to ethical standards.
iii. Supplier development: XYZ Company can invest in the development of its suppliers to improve their capability to deliver high-quality goods and services. This can include training, technology transfer, and quality improvement programs.
iv. Supplier segmentation: XYZ Company can segment its suppliers based on their strategic importance, risk profile, and contribution to the company's overall performance. This can help to focus resources on critical suppliers and manage risk more effectively.
v. Continuous improvement: XYZ Company can encourage its suppliers to participate in continuous improvement initiatives such as lean manufacturing, waste reduction, and value engineering. This can help to drive down costs, improve quality, and increase efficiency over time.
To know more about procurement visit:
https://brainly.com/question/30019470
#SPJ11
regards to fundamental of valuation, analyze and evaluate the J&J’s market performance over 5 years and Pfizer's and industry's, using financial statement ratios
determine the company's intrinsic value-share, in accordance with financial theory, by discounting cash flows to their present value using the required rate of return
Analyzing and evaluating the market performance of J&J, Pfizer, and the industry over a 5-year period requires a comprehensive assessment of their financial statement ratios.
It is important to note that the specific financial ratios used may vary depending on the valuation approach and industry benchmarks. However, some commonly used ratios for evaluating market performance and intrinsic value estimation include profitability ratios, liquidity ratios, leverage ratios, and valuation ratios.
Profitability Ratios:
Profitability ratios measure a company's ability to generate profits from its operations. Key ratios to consider include:
Return on Assets (ROA): Net income divided by average total assets.
Return on Equity (ROE): Net income divided by average shareholders' equity.
Gross Profit Margin: Gross profit divided by revenue.
Net Profit Margin: Net income divided by revenue.
Comparing these ratios for J&J, Pfizer, and the industry will provide insights into their profitability and their ability to generate returns for investors.
Liquidity Ratios:
Liquidity ratios assess a company's ability to meet short-term obligations. Key ratios to consider include:
Current Ratio: Current assets divided by current liabilities.
Quick Ratio: (Current assets - inventory) divided by current liabilities.
Examining the liquidity ratios will help determine if J&J, Pfizer, and the industry have sufficient short-term assets to cover their liabilities.
Leverage Ratios:
Leverage ratios measure the extent to which a company relies on debt financing. Key ratios to consider include:
Debt-to-Equity Ratio: Total debt divided by total equity.
Interest Coverage Ratio: Earnings before interest and taxes (EBIT) divided by interest expense.
Analyzing these ratios will provide insights into the financial leverage of J&J, Pfizer, and the industry, as well as their ability to service debt obligations.
Valuation Ratios:
Valuation ratios help assess the relative value of a company's shares. Key ratios to consider include:
Price-to-Earnings (P/E) Ratio: Market price per share divided by earnings per share.
Price-to-Sales (P/S) Ratio: Market price per share divided by revenue per share.
Price-to-Book (P/B) Ratio: Market price per share divided by book value per share.
Comparing these ratios for J&J, Pfizer, and the industry will provide insights into their valuation and how the market perceives their shares.
To determine the intrinsic value of the shares, you will need to forecast the company's future cash flows, estimate the required rate of return (discount rate), and discount the cash flows to their present value. This process involves making assumptions about future growth rates, profitability, and risk factors. The discounted cash flow (DCF) analysis is a widely used method for estimating intrinsic value.
Please note that conducting a thorough analysis and calculating intrinsic value requires access to detailed financial information and industry-specific data. It is recommended to consult financial analysts, utilize specialized valuation models, and consider multiple perspectives to obtain a comprehensive understanding of a company's market performance and intrinsic value.
Learn more about market here:
https://brainly.com/question/27847462
#SPJ11
daily demand of 47 units with S.D of 4 unite and lead time of 13
days with a S.D of 2 days, and 99.2% service level.
find the reorder point?
The reorder point is approximately 640 units, which means that when the inventory level reaches or falls below 640 units
The reorder point represents the inventory level at which a new order should be placed to avoid stockouts. In this case, the demand during the lead time is calculated by multiplying the average daily demand (47 units) by the lead time (13 days), resulting in 611 units. The variance in demand during the lead time is found by squaring the standard deviation of the daily demand (4 units) and multiplying it by the lead time (13 days squared), resulting in 208 units squared.
The Z-score for a 99.2% service level can be obtained from a standard normal distribution table or calculated using statistical software. For a 99.2% service level, the Z-score is approximately 2.08.
Substituting the values into the formula: Reorder Point = 611 units + (2.08 * √208 units) ≈ 611 units + (2.08 * 14.42 units) ≈ 611 units + 29.99 units ≈ 640 units.
Therefore, the reorder point is approximately 640 units, which means that when the inventory level reaches or falls below 640 units, a new order should be placed to maintain the desired service level of 99.2%.
Learn more about reorder point here:
https://brainly.com/question/31054382
#SPJ11
Consider a repeated game with an infinite time horizon. There are N(2 2) firms producing a homogeneous product. These firms à la Bertrand every period. The aggregate demand function in each period is P-54-3Q. Each firm has a const function of C(q-64 Firms' discount factor is B. Let QM and let qM- be total output in a period under monopoly Suppose the firms use the following trigger strategies. Each firmi chooses qM in the first period. It further chooses qM in subsequent periods if no deviation from qM has been observed. Otherwise it competes in Bertrand fashion. The technology of detecting a deviation from qM is not perfect: there is a time lag of T periods before firms observe other players' previous choices. For example, if a firm chooses something other than ạM in period 1, the punishment for this deviation will take place in period T+2 Under what conditions on ß, T, and N, can this trigger strategy support the monopoly allocation? Does a higher ß make this tacit collusion easier to sustain? Does a higher T make it easier? What about N?
In a repeated game with N(2 2) firms and strategies, trigger the monopoly allocation can be supported if certain conditions on ß (discount factor), T (time lag), and N (number of firms) are met.
The trigger strategy described involves firms initially choosing the monopoly output level, qM, and continuing to choose it in subsequent periods if no deviation is observed. If a deviation occurs, competition in a Bertrand fashion takes place after a time lag of T periods.
To support the monopoly allocation, certain conditions need to be met. A higher ß, representing a higher discount factor, makes tacit collusion easier to sustain. A higher ß increases the weight placed on future payoffs, incentivizing firms to stick to the cooperative output level.
The conditions for sustaining the monopoly allocation in this repeated game depend on the values of ß, T, and N. A higher ß makes tacit collusion easier to sustain, while a higher T makes it more challenging. The impact of N on sustaining collusion depends on the specific values of ß and T.
To learn more about trigger.
Click here:brainly.com/question/8215842?
#SPJ11
Consider the following models for a time series, y, where & denotes a white noise random variable with E(e) - 0 and E(e) - 0². (a) Suppose t, follows a first order moving average process of the form Yt = a + 4 + 08-11 (3) where is a scalar. Explain the conditions under which y, is stationary. Derive the expected value and the variance of t. Derive expressions summarising the autocorrelation function, Pk E[(yt — Eyr) (Yt-k - Eyt-k)] E(yt - Eyr)² for the process described in (3). Show that it is possible for an identical autocorrelation function to be generated by the process yt = a +&+0¹1-1. Discuss how sample estimates of P would be expected to look for an MA(q) process and how these could be used as part of model identification and estimation. (200 words) (10 marks)
For the given first-order moving average (MA(1)) process, the conditions for stationarity are explained. The expected value and variance of the process are derived. The autocorrelation function is derived and shown to be the same as another process. The discussion focuses on how sample estimates of the autocorrelation function can be used for model identification and estimation in an MA(q) process.
To determine the conditions for stationarity in the MA(1) process described as Yt = a + & + 0.8Yt-1, we need to ensure that the roots of the characteristic equation, 1 - 0.8B, are outside the unit circle. In this case, the root is 1/0.8 = 1.25, which is greater than 1. Therefore, the process is stationary. The expected value of Yt can be obtained by taking the expectation of the process, resulting in E(Yt) = a/(1 - 0.8). The variance of Yt can be derived as Var(Yt) = (1 + 0.8²)σ², where σ² represents the variance of the white noise process . The autocorrelation function, ρk, can be expressed as ρk = Cov(Yt, Yt-k)/Var(Yt), which simplifies to ρk = (-0.8^k)/(1 + 0.8²). Interestingly, this autocorrelation function is the same as that of another process, yt = a + & + 0.8yt-1, which is an autoregressive process of order one, AR(1). In an MA(q) process, the sample estimates of the autocorrelation function can be used for model identification and estimation. The estimates would typically show significant values at lag q and insignificant values at lags greater than q. These estimates can help determine the order of the MA process (q) and assist in fitting the appropriate model to the data. In conclusion, the conditions for stationarity in the MA(1) process are explained, along with the derivation of the expected value and variance.
Learn more about moving average (MA(1)) process here
https://brainly.com/question/31692878
#SPJ11
3. (a) Discuss sales promotion activities with examples. What are the steps in developing the sales promotion strategy? (b) Write short notes on the following topics with examples: i. Transformational Innovation ii. Finer Market Segmentation
(a) Sales promotion activities refer to the short-term incentives designed to encourage the purchase or sale of a product or service. Examples of sales promotion activities include contests, coupons, rebates, product samples, discounts, and free gifts. Developing a sales promotion strategy involves several steps, including:
1. Defining the objectives of the sales promotion: This involves identifying the specific goals that the promotion is intended to achieve, such as increasing sales, boosting brand awareness, or attracting new customers.
2. Identifying the target audience: This involves defining the specific group of consumers that the promotion is aimed at reaching, such as existing customers, new customers, or specific demographic groups.
3. Selecting the type of promotion: This involves choosing the specific sales promotion activity that will be used to achieve the desired objectives, such as offering a discount, running a contest, or providing free samples.
4. Determining the budget: This involves setting the amount of money that will be allocated to the sales promotion activity.
5. Developing a timeline: This involves creating a schedule for implementing and executing the sales promotion strategy.
(b) Short notes:
(i) Transformational Innovation: This refers to the process of creating new products, services, or business models that fundamentally change the way that people live, work, or interact. Transformational innovation involves introducing new technologies, business practices, or products that disrupt existing markets or create entirely new ones. Examples of transformational innovation include the smartphone, social media, and ride-sharing apps like Uber and Lyft.
(ii) Finer Market Segmentation: Market segmentation involves dividing a larger market into smaller, more specific groups of consumers with similar needs or characteristics. Finer market segmentation refers to the process of dividing a market into even smaller, more precise segments based on more specific criteria. For example, instead of segmenting a market based on age, a company might segment the market based on income, education level, or lifestyle. This allows companies to tailor their marketing messages and products to the specific needs and preferences of different groups of consumers.
Learn more about Market segmentation: https://brainly.com/question/14315539
#SPJ11
Show the effect on the real interest rate and equilibrium quantity of loanable funds of a decrease in the demand for loanable funds and an even larger decrease in the supply of loanable funds. Draw a demand for loanable funds curve. Label it DLF. Draw a supply of loanable funds curve. Label it SLF Draw a point at the equilibrium real interest rate and quantity of loanable funds. Label it 1. Draw a curve that shows a decrease in the demand for loanable funds. Label it DLF₁. Draw a curve that shows an even larger decrease in the supply of loanable funds. Label it SLF₁. Draw a point at the new equilibrium real interest rate and quantity of loanable funds. Label it 2. 12.0 10.0- Real interest rate (percent per year) 8.04 6.0- 4.0 2.0 0.0+ 0.0 1.0 2.0 4.0 3.0 Loanable funds (trillions of 2012 dollars) 5.0
An even larger decrease in the supply of loanable funds (SLF₁) would shift the supply curve.
As a result, lenders may lower the interest rates to entice borrowers to borrow the available funds.On the other hand, when there is an even larger decrease in the supply of loanable funds, it leads to a further decrease in the equilibrium quantity of loanable funds and an increase in the real interest rate. A decrease in the supply means that there are fewer funds available for lending, and lenders may increase the interest rates to compensate for the scarcity of loanable funds.
learn more about loanable funds here:
https://brainly.com/question/28996529
#SPJ11
Give me a life example of any governments in any country intervene the market with price floor or increase taxes (based on the scope of microeconomics) (e.g : example of a country where the government increases the minimum wage of workers based on the concept of price floor or increase taxes on certain products during the pandemic)
One example of government intervention in the market with a price floor is the minimum wage policy implemented by the United States government. The minimum wage is set as a price floor, which establishes a legally mandated minimum hourly wage that employers must pay to their workers.
By increasing the minimum wage, the government aims to ensure that workers receive a fair and livable wage, addressing potential market failures such as low wages and income inequality. This policy intervention affects the labor market, particularly for low-wage workers.
When the government raises the minimum wage, it establishes a price floor above the equilibrium wage rate determined by market forces. As a result, employers are legally required to pay their workers at least the minimum wage, which can lead to higher incomes and improved living standards for workers. However, it may also have unintended consequences such as reduced employment opportunities, as employers might be less willing or able to hire additional workers at the higher wage.
To know more about government intervention, visit:
brainly.com/question/29753823
#SPJ11
According to research undertaken by Guest (1989) and Boxall & Purcell (2003), organizational performance may be positively influenced by having in place certain HR practices. Discuss what these practices are likely to be and how an organization might address their integration.w
write minimum 400 words
Guest (1989) and Boxall & Purcell (2003) carried out research indicating that the presence of some human resource practices might positively affect organizational performance. The essay discusses what the techniques are likely to be and how an organization may approach their integration.
The HR policies and practices can be classified into two categories: those that are designed to meet the needs of workers and those that are designed to meet the needs of the company. HR policies that are designed to meet the needs of workers include offering better training and development opportunities, providing a safer working environment, creating better working conditions, and more flexible work arrangements. The policies that are designed to meet the needs of the company include better strategic planning, better financial management, and better marketing.The following are the human resource practices that can positively affect organizational performance as suggested by the Guest (1989) and Boxall & Purcell (2003):Training and Development: Training and development are important to both the organization and the individual employee.
To know more about integration visit:
https://brainly.com/question/30094386
#SPJ11
Alpha Ltd
Statement of profit or loss for the year ended 31.12.2020
$
Turnover 12,500,000
Cost of sales 5,800,000
Gross profit 6,700,000
Administrative expenses 1,300,000
Selling and distribution costs 1,700,000
PBIT 3,700,000
Finance costs 1,000,000
PBT 2,700,000
Taxation 1,200,000
PAT 1,500,000
Transfer to general reserves 300,000
Interim preference dividend 150,000
On 1.1.2020 V Ltd acquired 90% of share capital of G Ltd. V Ltd issued 2 new shares for every 3 shares of G Ltd acquired, when the market value of the share of V Ltd was $6 and the market value of the share of G Ltd was $3. On 31.12.2020, V Ltd will pay $1.75 per share acquired to shareholders of G Ltd. Cost of capital is 10% per annum.
Statement of profit or loss for the year ended 30.09.2020
V Ltd G Ltd
$000 $000
Revenue 65000 40000
Cost of sales 50000 25000
Gross profit 15000 15000
Distribution costs 2000 2000
Administrative expenses 4000 3000
Investment income 500 -
Finance cost 500 -
PBT 9000 10000
Taxation 3000 2000
Profit for the year 6000 8000
Equity 1.10.2019
Equity shares $1 each 30000 10000
Retained earnings 55000 35000
Notes
1. At the date of acquisition, the fair value of G Ltd assets was equal to their carrying amounts with 2 exemptions (the fair value changes of which has not been incorporated into the financial statements of G Ltd).
a. An item of plant had a fair value of 2 million above its carrying amount, its remaining life was 3 years and depreciation is charged to cost of sales
b. G Ltd had a contingent liability which V Ltd estimated to have a fair value of $500000 which did not change as at 30.09.2020
2. V Ltd values NCI at fair value at acquisition date by using the market value of G Ltd shares at that date which is representative of the fair value of the shares held by NCI
3.Sales from V Ltd to G Ltd during the year ended 30.09.2020 were 750000 per month at a mark up of 20% on cost. G Ltd had $1.5 million of these goods in stock at 30.09.2020
4. V Ltd investment income is a dividend received from investment in a 40% owned associate, held for few years, the profit of which was $2 million for the year ended 30.09.2020.
5. Although G Ltd was profitable since the acquisition by V Ltd, the market for G Ltd products was hit in recent months and V Ltd calculated that goodwill was impaired by $2 million as at 30.09.2020
Required
a. Calculate goodwill arising on acquisition of G Ltd
b. Prepare consolidated statement of profit or loss for V Ltd for the year ended 30.09.2020
a) Goodwill arising on acquisition of G Ltd is $1,500,002.
b) The consolidated statement of profit or loss for V Ltd for the year ended 30.09.2020 shows a profit attributable to equity shareholders of V Ltd of $3,233,333 and retained earnings at 30.09.2020 of $57,783,333.
a. Goodwill arising on acquisition of G Ltd can be calculated as follows:
Consideration transferred:
90% of share capital of G Ltd = 0.9 x $10,000,000 = $9,000,000
2 new shares issued for every 3 shares of G Ltd acquired:
Number of shares issued = (2/3) x 10,000,000 = 6,666,667
Market value per share of V Ltd = $6
Total value of shares issued = 6,666,667 x $6 = $40,000,002
Total consideration transferred = $49,000,002
Less: Fair value of net assets acquired:
Share capital of G Ltd = $10,000,000
Retained earnings of G Ltd = $35,000,000
Fair value adjustment for plant = $2,000,000
Contingent liability = $500,000
Fair value of net assets acquired = $47,500,000
Goodwill arising on acquisition of G Ltd = Total consideration transferred - Fair value of net assets acquired
= $49,000,002 - $47,500,000
= $1,500,002
Therefore, goodwill arising on acquisition of G Ltd is $1,500,002.
b. Consolidated statement of profit or loss for V Ltd for the year ended 30.09.2020 can be prepared as follows:
Revenue:
V Ltd revenue = $65,000,000
Sales to G Ltd (eliminated on consolidation) = $9,000,000
Total revenue = $74,000,000
Cost of sales:
V Ltd cost of sales = $50,000,000
Cost of sales of goods sold to G Ltd (eliminated on consolidation) = $9,000,000 x 80% = $7,200,000
Fair value adjustment for plant (eliminated on consolidation) = $2,000,000/3 = $666,667
Total cost of sales = $57,866,667
Gross profit = Total revenue - Total cost of sales
= $74,000,000 - $57,866,667
= $16,133,333
Distribution costs:
V Ltd distribution costs = $2,000,000
Distribution costs of goods sold to G Ltd (eliminated on consolidation) = $9,000,000 x 20% = $1,800,000
Total distribution costs = $3,800,000
Administrative expenses:
V Ltd administrative expenses = $4,000,000
Administrative expenses of G Ltd (eliminated on consolidation) = $3,000,000
Total administrative expenses = $7,000,000
Investment income:
Dividend received from associate = $2,000,000
Finance costs:
V Ltd finance costs = $500,000
PBT = Gross profit - Distribution costs - Administrative expenses + Investment income - Finance costs
= $16,133,333 - $3,800,000 - $7,000,000 + $2,000,000 - $500,000
= $6,833,333
Taxation = $3,000,000 + $2,000,000 x 30%
= $3,600,000
Profit for the year (attributable to equity shareholders of V Ltd) = PBT - Taxation
= $6,833,333 - $3,600,000
= $3,233,333
Retained earnings at 30.09.2020 = Retained earnings at 1.10.2019 + Profit for the year - Interim preference dividend - Transfer to general reserves
= $55,000,000 + $3,233,333 - $150,000 - $300,000
= $57,783,333
Therefore, the consolidated statement of profit or loss for V Ltd for the year ended 30.09.2020 shows a profit attributable to equity shareholders of V Ltd of $3,233,333 and retained earnings at 30.09.2020 of $57,783,333.
Learn more about shareholders here:
https://brainly.com/question/32417231
#SPJ11
3. A corporation plans a capital expansion program that requires the following estimated expenditures: Php 2,000,000 five years hence; Php 3,000,000 eight years hence; and Php 1,600,000 twelve years hence. To accumulate the required capital, it has established a sinking fund in which it will make 12 equal annual deposits, the first deposit to be made 1 year hence. If the interest rate of the fund is 6%, what annual deposit is required? Hat will be the principal in the fund 6 years hence?
To accumulate the required capital for a capital expansion program, the corporation needs to make annual deposits of approximately Php 277,170.15. The principal in the fund 6 years hence will be Php 1,998,406.56.
To determine the annual deposit required, we can use the sinking fund formula. The sinking fund formula calculates the regular deposit needed to accumulate a specific amount of money in the future.
Using the sinking fund formula: A = P[(1 + i)^n - 1] / i, where A is the future amount, P is the annual deposit, i is the interest rate, and n is the number of years.
For the first expenditure of Php 2,000,000 in 5 years, we can solve for P. A is Php 2,000,000, i is 6% (or 0.06), and n is 5. Plugging in these values, we find that the annual deposit required is approximately Php 277,170.15.
To calculate the principal in the fund 6 years hence, we need to find the accumulated value of the deposits made over the 6-year period. Using the future value of an annuity formula: FV = P[((1 + i)^n - 1) / i], where FV is the future value, P is the annual deposit, i is the interest rate and n is the number of years.
Plugging in the values: P is Php 277,170.15, i is 6%, and n is 6, we can calculate that the principal in the fund 6 years hence will be approximately Php 1,998,406.56.
Therefore, the corporation needs to make annual deposits of approximately Php 277,170.15, and the principal in the fund 6 years hence will be Php 1,998,406.56.
Learn more about annuity here :
https://brainly.com/question/31418012
#SPJ11
What type of data is customer data?
A) Master
B)Customizing
C) Transaction
D) Configuration
Answer:
A) Master
Explanation:
Customer data typically falls under the category of transactional data. Transactional data refers to data that is generated during transactions between a company and its customers, such as sales orders, invoices, and payment information.
This type of data can be used for various purposes, including analysis of customer behavior, targeted marketing, and personalized customer service. However, depending on the context, customer data may also contain elements of master data (such as customer name and contact information) or customizing data (such as preferences and settings). Configuration data, on the other hand, typically refers to data related to the configuration of software or systems, rather than customer interactions.
Learn more about customer from
https://brainly.com/question/1286522
#SPJ11
(1%) Which of the following statements are correct? i) The production possibility frontier is steeper at the right end than the left because some resources are better suited to make some products than others. ii) Perfectly inelastic demand is a horizontal line. iii) The production possibility frontier illustrates how much of each product is manufactured in the economy. iv) Inflation causes higher interest rates. v) The production of consumer goods and capital goods will always occur on the production possibility curve. A) i, ii, iii & v B) i, iii & v C) ii, iii & iv D) ii, iv & v E) i & iii
i, iii & v.
It is steeper at the right end because resources are typically specialized and better suited to produce certain goods more efficiently than others.
i) The production possibility frontier (PPF) represents the maximum combination of goods an economy can produce with its available resources and technology.
iii) The production possibility frontier illustrates the different combinations of products that can be manufactured in the economy given its resources and technology. It shows the trade-off between producing one good versus another.
v) The production of consumer goods and capital goods can occur on the production possibility curve, which represents the efficient allocation of resources. However, if the economy is not operating at full efficiency, the production may occur below the curve.
Learn more about production possibility frontier (PPF here:
https://brainly.com/question/14543792
#SPJ11
During 2024, Zone Company completed the winge Click the loon to view) Record the transactions in the journal of Zors Company (od debts fret, then credite Select the non of the malety) Jan 1: Traded in okd office equipment with book value of $25.000 (eat of $99,000 and courted depreciation of $74,000) for new had commercial substance Record a single compound mal entry) 1.2 Date Accounts and Explanation Credi Jan 1 Apr 1: Sold equipment that cost $60,000 (accumulated depreciation of $52,000 through December 31 of the preceding year) Zora received $4,200 cash equipment has a five-year useful life and a residual value of 50. Before we record the sale of the equipment, we must record depreciation on the equipment through April 1, 2004 Debit Credit Accounts and Explanation Date Apr. 1 equipment Depreciation is compute More info Jan. 1 Apr. 1 Dec. 31 Traded in old office equipment with book value of $25,000 (cost of $99,000 and accumulated depreciation of $74,000) for new equipment. Zora also paid $80,000 in cash. Fair value of new equipment is $107,000. Assume the exchange had commercial substance. Sold equipment that cost $60,000 (accumulated depreciation of $52,000 through December 31 otthe preceding year). Zora received $4,200 cash from the sale of the equipment. Depreciation is computed on a straight-line basis. The equipment has a five-year useful life and a residual value of $0. Recorded depreciation expense as follows: Office equipment is depreciated using the double-declining-balance method over four years with a $10,000 residual value. Print Done Before we record the sale of the equipment, we must record depreciation on the equipment through April 1, 2024. Accounts and Explanation Debit Credit Date Apr. 1 Now record the sale of the equipment on April 1. Date Accounts and Explanation Debit Credit Apr. 1 Dec. 31: Recorded depreciation on the office equipment Office equipment is depreciated using the double-declining-balance method over four years with a $10,000 residual value Dec. 31: Recorded depreciation on the office equipment Office equipment is depreciated using the double-declining-balance method aver four years with a $10,000 residual value Date Accounts and Explanation Debit Credit Dec.
The journal entries for these transactions are as follows:January 1 Accounts and ExplanationDebit CreditNew equipment$27,000Office equipment (depreciation)$74,000Accumulated depreciation$99,000Cash$80,000Gain on exchange$22,000April 1 Accounts and ExplanationDebit Credit.
Depreciation is defined as the loss of value of an asset due to age, wear and tear, and/or other causes. Straight-line depreciation is the most common method of depreciation, in which the asset is depreciated uniformly over its useful life. Double-declining balance depreciation is a method of depreciation in which the asset is depreciated more quickly at the outset and then at a slower rate over time.In 2024, Zora Company completed the following transactions:On January 1, Zora Company traded in old office equipment with a book value of $25,000 (cost of $99,000 and accumulated depreciation of $74,000) for new equipment. Zora also paid $80,000 in cash. The fair value of the new equipment is $107,000. Assume that the exchange had commercial substance. A single compound journal entry was recorded.On April 1, Zora Company sold equipment that cost $60,000 (accumulated depreciation of $52,000 through December 31 of the preceding year) for $4,200 cash. The equipment has a five-year useful life and a residual value of $0. Before recording the sale of the equipment, depreciation on the equipment was recorded through April 1, 2024.The office equipment is depreciated over four years using the double-declining-balance method with a residual value of $10,000. Depreciation was recorded on December 31.Recorded depreciation on the office equipment using the double-declining-balance method over four years with a $10,000 residual value on December 31. As a result, the journal entries for these transactions are as follows:January 1 Accounts and ExplanationDebit CreditNew equipment$27,000Office equipment (depreciation)$74,000Accumulated depreciation$99,000Cash$80,000Gain on exchange$22,000April 1 Accounts and ExplanationDebit CreditDepreciation expense$1,680Accumulated depreciation$1,680Cash$4,200Equipment$52,000Gain on sale$8,520December 31 Accounts and ExplanationDebit CreditDepreciation expense$3,250Accumulated depreciation$3,250.
To know more about depreciation visit :
https://brainly.com/question/8194979
#SPJ11
A company issued 1,000 shares of its P5 par value ordinary shares as payment for 1,000 hours of legal services performed. The fair value of the legal services was P160,000. On the date of issuance, the company’s shares were trading on a public exchange at P140 per share. Determine the increase in the company’s equity as a result of this transaction.
The increase in the company's equity as a result of this transaction is P20,000, calculated as the difference between the fair value of the legal services received (P160,000) and the fair value of the shares issued (P140,000).
How did the company's equity increase as a result of the transaction?To determine the increase in the company's equity as a result of this transaction, we need to calculate the difference between the fair value of the legal services received and the par value of the shares issued.
The fair value of the legal services received is given as P160,000. This represents the value of the 1,000 hours of legal services performed.
The par value of the ordinary shares issued is P5 per share, and the company issued 1,000 shares. So the total par value of the shares issued is P5 * 1,000 = P5,000.
However, the shares were trading on a public exchange at P140 per share on the date of issuance. Therefore, the fair value of the shares issued is P140 * 1,000 = P140,000.
To determine the increase in the company's equity, we calculate the difference between the fair value of the legal services received (P160,000) and the fair value of the shares issued (P140,000).
Increase in equity = Fair value of legal services received - Fair value of shares issued
= P160,000 - P140,000
= P20,000
Therefore, the increase in the company's equity as a result of this transaction is P20,000.
Learn more about company's equity
brainly.com/question/9449335
#SPJ11
A lottery claims its grand prize is $2 million, payable over 4 years at $500,000 per year. If the first payment is made four years from now, what is this grand prize really worth today? Use an interest rate of 6%. a b. What is the yield to maturity on a simple loan for $3 million that requires a repayment of $5 million in five years' time?
The grand prize is worth approximately $1,792,214.76 today. The yield to maturity on the loan is approximately 9.05%.
Present Value Of The Grand Prize And The Yield To Maturity On A Simple Loana) To determine the present value of the grand prize of $2 million payable over 4 years at $500,000 per year, we need to discount the future cash flows at the given interest rate of 6%.
Using the formula for calculating the present value of an annuity, we have:
Present Value = Cash Flow / (1 + interest rate)[tex]^n[/tex]
where:
Cash Flow = $500,000 (annual payment)
Interest Rate = 6% or 0.06
n = number of years
Calculating the present value for each cash flow and summing them up:
PV = $500,000 / (1 + 0.06)[tex]^1[/tex] + $500,000 / (1 + 0.06)[tex]^2[/tex] + $500,000 / (1 + 0.06)[tex]^3[/tex] + $500,000 / (1 + 0.06)[tex]^4[/tex]
PV ≈ $1,792,214.76
b) To calculate the yield to maturity on a simple loan for $3 million that requires a repayment of $5 million in five years' time, we need to solve for the interest rate.
Using the formula for yield to maturity, we can rearrange it to solve for the interest rate:
YTM = (Face Value / Present Value)^(1/n) - 1
where:
Face Value = $5 million
Present Value = $3 million
n = number of years = 5
Plugging in the given values:
YTM = ($5,000,000 / $3,000,000)[tex]^(1/5)[/tex] - 1
YTM ≈ 0.090546 or 9.05% (rounded to two decimal places)
Learn more about loan
brainly.com/question/30015539
#SPJ11
The impact of Free Trade Agreement on Morocco-turkey trade
exchange
The Free Trade Agreement (FTA) between Morocco and Turkey has had a positive impact on their trade exchange.
The Free Trade Agreement between Morocco and Turkey has facilitated the removal or reduction of trade barriers, such as tariffs and quotas, between the two countries. This has created a more favorable and conducive environment for trade, resulting in increased bilateral trade exchange.
The FTA has led to enhanced market access, as it provides preferential treatment for goods and services traded between Morocco and Turkey. This has encouraged businesses in both countries to explore new trade opportunities and expand their export-import activities. The elimination of trade barriers has also made products more affordable and competitive, benefiting consumers and fostering economic growth in both countries.
Additionally, the FTA has promoted investment flows and encouraged deeper economic cooperation between Morocco and Turkey. It has provided a framework for collaboration in various sectors, leading to joint ventures, technology transfer, and knowledge sharing.
Overall, the Free Trade Agreement between Morocco and Turkey has stimulated trade exchange by fostering an enabling environment, reducing trade barriers, and promoting economic integration between the two nations.
Learn more about the Free Trade Agreement here:
https://brainly.com/question/16010176
#SPJ11
What factor has fueled the growth of small local retailers
giving way to large multinational chains?
Multiple Choice
better market segmentation strategies
a movement away from conscious retailing
Economies of scale: Large multinational chains can take advantage of their size and resources to achieve cost efficiencies in sourcing, production, and distribution. They can negotiate better deals with suppliers, invest in advanced technologies, and streamline operations, allowing them to offer competitive prices and a wide range of products.
Branding and marketing power: Large multinational chains often have strong brand recognition and extensive marketing budgets. They can invest heavily in advertising campaigns, create a consistent brand image, and build customer loyalty through effective branding strategies. This gives them an advantage over small local retailers in terms of attracting customers and maintaining market share.
Supply chain management: Multinational chains have sophisticated supply chain networks that enable them to efficiently manage inventory, reduce costs, and ensure product availability across multiple locations. This allows them to meet consumer demands more effectively and compete on a larger scale.
Technological advancements: Large multinational chains often have the financial resources to invest in innovative technologies and systems. This enables them to implement efficient point-of-sale systems, e-commerce platforms, data analytics, and customer relationship management tools. These technological advancements can enhance the shopping experience, improve operational efficiency, and provide valuable insights for decision-making.
In contrast, the growth of small local retailers is influenced by factors such as personalized customer service, unique product offerings, and a sense of community connection. However, they may face challenges in competing with multinational chains due to limited resources, higher costs, and difficulty in expanding their reach beyond their local markets.
To know more about multinational , visit:
https://brainly.com/question/1163894
#SPJ11
The Coase Theorem is ................ a. a theorem that suggests that taxes should be imposed on companies that create negative externalities. b. a theorem that suggests that market-based solutions can solve negative externalities under certain conditions c. a theorem that suggests that governmental controls and fines are necessary to solve negative externalities since property rights are always impossible to define. d. a theorem that suggests that negative externalities cannot exist since the market mechanism leads to socially optimal outcomes for society.
Correct option is b.The Coase Theorem suggests that market-based solutions can solve negative externalities under certain conditions.
How does the Coase Theorem address negative externalities?The Coase Theorem is an economic theorem that suggests that market-based solutions can effectively address negative externalities, given certain conditions.
It proposes that if property rights are clearly defined, transaction costs are minimal, and parties can freely negotiate and bargain with each other, then they can internalize the costs and benefits of the externality through voluntary exchanges. This means that affected parties can reach mutually beneficial agreements without the need for government intervention or fines.
According to the Coase Theorem, when property rights are well-defined and transaction costs are low, individuals or firms can negotiate and come to agreements that internalize the external costs or benefits.
This allows for the efficient allocation of resources and the achievement of socially optimal outcomes. For example, if a factory is causing pollution, the affected party could negotiate with the factory to either reduce emissions or compensate for the damages caused.
The Coase Theorem highlights the importance of property rights and the power of voluntary exchanges in addressing negative externalities without the need for governmental controls or fines.
Learn more about externalities
brainly.com/question/31572218
#SPJ11
QUESTION 2 Which of the following statements is incorrect? O A. The cash receipts and cash expenses are an important part of the cash budget O B. Cash receipts is the total cash inflow in a given mont
The incorrect statement is:
O B. Cash receipts is the total cash inflow in a given month.
The statement in option B is incorrect. Cash receipts do not necessarily represent the total cash inflow in a given month. Cash receipts refer to the specific cash inflows received by a company or individual, which can include various sources such as sales revenue, loan proceeds, investment income, and other sources of cash inflow.
The total cash inflow in a given month would include not only cash receipts but also other cash sources like borrowing, investment proceeds, or any other cash inflows that may not be classified as cash receipts. It's important to consider all the various sources of cash inflow to accurately determine the total cash inflow in a given month.
Therefore, option B is the incorrect statement.
Learn more about Cash inflow here
brainly.com/question/18333725
#SPJ11
Extra Instructions for Calculated Numere questions A. DO NOT put a sign in front. For example, if your answer is 51234 you should write 1234 as your answer b. Indicato negative number by putting a minus sign in front. Therefore, it your answer is negative 1234 you need to post-1234 as your answer 6. Round your answer to the nearest whole number, le no decimal points. So if your answer is 1234,60 you should writo 1238 2. Lohman's Products, Ltd. makes specialty motor. The company es an activity-based contingwylem for computing unit costs of its products. The company has four activity cost pool as listad below: Activity Cost Pool Order Size Customer orders Product testing Selling Activity Measure Number of direct labor-hours Number of customer orders Number of testing hours Number of sales cali Activity Rate $17.10 per direct labor-hour $369.00 per customer order $61.00 per testinghout 51498.00per als cal The managing director of the company would like information concerning the cost of a recently completed order for heavy-duty trailer des The order required 200 direct labor hours, 12 hours of product testing, and sales calls Required: What is the total overhead cos assigned to the order for heavy-duty trailer des?
To calculate the total overhead cost assigned to the order for heavy-duty trailer design, we need to multiply the activity rates by their respective activity measures and sum them up.
The activity measures for the order are as follows: Number of direct labor hours: 200 hours
Number of product testing hours: 12 hours
Number of sales calls: 1 call
Using the given activity rates, we can calculate the overhead cost for each activity:
Number of direct labor hours:
Overhead cost = Activity rate * Activity measure
Overhead cost for direct labor hours = $17.10 per direct labor-hour * 200 hours = $3,420
Number of product testing hours:
Overhead cost for product testing = $61.00 per testing hour * 12 hours = $732
Number of sales calls:
Overhead cost for sales calls = $51498.00 per sales call * 1 call = $51,498
Now, we can calculate the total overhead cost assigned to the order by summing up the overhead costs for each activity:
Total overhead cost = Overhead cost for direct labor hours + Overhead cost for product testing + Overhead cost for sales calls
Total overhead cost = $3,420 + $732 + $51,498 = $55,650
Therefore, the total overhead cost assigned to the order for heavy-duty trailer design is $55,650.
Learn more about measures here
https://brainly.com/question/29650084
#SPJ11
ifrs reporting currently does not allow which method of inventory costing?
Under IFRS (International Financial Reporting Standards), the method of inventory costing that is currently not allowed is the Last-In, First-Out (LIFO) method.
Under IFRS, the Last-In, First-Out (LIFO) method of inventory costing is not allowed for reporting purposes. This means that companies following IFRS guidelines cannot use the LIFO method to value their inventory and calculate the cost of goods sold (COGS).
The primary reason for this restriction is that the LIFO method does not align with the principles and objectives of IFRS, which emphasize the use of reliable and consistent financial reporting practices. The LIFO method assumes that the most recently acquired inventory is sold first, which can result in a mismatch between the actual flow of inventory and the reported cost of goods sold.
Learn more about inventory costing from
https://brainly.com/question/6640325
#SPJ11
Harassing behaviour is against our organization's policy, however there are no legal consequences for this type of behaviour Fale Question #2 Workplace violence can only be committed by coworkers. True False Question #3 Companies and organizations do not have liability if the abusive contact occurs between twi two coworkers only True False Question 24 Only Supervisors or Managers, not Employees, are responsible for reporting workplace violence. True False Question #5 Employers are required to prepare policies with respect to workplace harassment and violence. True False Question #G Workplace safety is the responsibility of which of the following? Employer Employee All of the above
Harassing behavior is against the policy of most organizations. However, there are no legal consequences for this type of behavior. Harassment is a form of discrimination that violates an individual's human rights. It is essential for organizations to prevent and address workplace harassment.
However, there are no legal consequences for harassing behavior; nonetheless, it can cause emotional harm to the victims and create a toxic work environment. It's crucial to report the harassment incidents to the employer to take action against the perpetrator to ensure a safe work environment for everyone. False is the answer to Question #2 "Workplace violence can only be committed by coworkers. "There are legal consequences for the employer in case of an abusive contact between two coworkers. It is the responsibility of the employer to ensure the safety of the employees and to create policies against workplace harassment and violence. False is the answer to Question #3 "Companies and organizations do not have liability if the abusive contact occurs between two coworkers only. "It's everyone's responsibility to report any workplace violence incidents to the supervisor or management to ensure a safer work environment. True is the answer to Question #4 "Only Supervisors or Managers, not Employees, are responsible for reporting workplace violence. "Employers are required to prepare policies with respect to workplace harassment and violence. The employers must ensure that all employees know and understand the policies and the consequences for violating them.True is the answer to Question #5 "Employers are required to prepare policies with respect to workplace harassment and violence."Workplace safety is the responsibility of all; employers, employees, and others. It is a shared responsibility to ensure a safe and healthy work environment for all. True is the answer to Question #6 "Workplace safety is the responsibility of which of the following? Employer Employee All of the above."
To know more about Harassing behavior visit:
https://brainly.com/question/1281607
#SPJ11
Explain 5 wens in which the concept of elasticity becomes useful to business mut government.
The concept of elasticity is useful to businesses and governments in a number of ways. Elasticity refers to the responsiveness of demand or supply to changes in price, income, or other factors.
This concept is crucial for businesses to understand in order to make informed decisions about pricing, production, and marketing. It is also important for governments to understand when making decisions about taxation, regulation, and public policy.
Here are five ways in which the concept of elasticity is useful to business and government:
1. Pricing decisions: Businesses can use elasticity to determine the best price for their products. If demand is highly elastic, meaning that consumers are very responsive to price changes, then businesses may need to set lower prices in order to increase sales. On the other hand, if demand is relatively inelastic, meaning that consumers are less responsive to price changes, then businesses may be able to charge higher prices without seeing a significant decrease in sales.
2. Production decisions: Understanding the elasticity of supply can help businesses make decisions about production. If supply is highly elastic, meaning that producers can quickly and easily increase production in response to increased demand, then businesses may be more willing to take risks and produce more goods. On the other hand, if supply is relatively inelastic, meaning that producers are less able to increase production in response to increased demand, then businesses may be more cautious about investing in production.
3. Marketing decisions: Elasticity can also be useful in making marketing decisions. For example, businesses may use elasticity to determine the most effective way to promote their products. If demand is highly elastic, then businesses may need to invest more in advertising and promotion in order to attract consumers. On the other hand, if demand is relatively inelastic, then businesses may be able to rely more on brand recognition and reputation.
4. Taxation decisions: Governments can use elasticity to make decisions about taxation. For example, if demand for a certain product is highly elastic, then governments may be able to raise taxes on that product without seeing a significant decrease in demand. On the other hand, if demand is relatively inelastic, then governments may need to be more cautious about raising taxes in order to avoid discouraging consumers from purchasing the product.
5. Public policy decisions: Elasticity can also be useful in making public policy decisions. For example, if the goal of a policy is to decrease the consumption of a certain product, then policymakers may want to consider the elasticity of demand for that product. If demand is highly elastic, then policies such as taxes or regulations may be effective in reducing consumption. On the other hand, if demand is relatively inelastic, then policymakers may need to consider other approaches, such as education or public awareness campaigns, in order to achieve their goals.
Learn more about elasticity:
https://brainly.com/question/1048608
#SPJ11
1) What is the difference between an Exception To Discharge in Bankruptcy and Objections To Discharge in Bankruptcy?
2) Explain the concept of a reaffirmation agreement
3) What is a debtor In Possession in a bankruptcy reorganization?
4) Explain the concept of the "cram down" provisionin a bankruptcy reorganization?
1) The difference between an Exception to Discharge and Objections to Discharge in bankruptcy lies in their respective purposes and outcomes. An Exception to Discharge refers to specific debts that are not eliminated or discharged through bankruptcy. These are debts that are deemed non-dischargeable by law, such as certain taxes, student loans, child support, and debts incurred through fraud or willful misconduct. Objections to Discharge, on the other hand, are objections raised by creditors or the bankruptcy trustee against the entire discharge of a debtor's debts. These objections are typically based on the debtor's actions, such as fraudulent behavior or failure to comply with bankruptcy requirements, and seek to prevent the debtor from obtaining a complete discharge of their debts.
2) A reaffirmation agreement is a legal contract made between a debtor and a creditor during a bankruptcy proceeding. It allows the debtor to voluntarily agree to continue being responsible for a specific debt, despite it being eligible for discharge in bankruptcy. By signing a reaffirmation agreement, the debtor essentially waives the dischargeability of that particular debt, meaning they remain liable for repaying it according to the agreed terms. Reaffirmation agreements are typically used for secured debts, such as car loans or mortgages, where the debtor wishes to keep the collateral associated with the debt and continue making payments to retain ownership.
3) In a bankruptcy reorganization, a debtor in possession refers to a situation where the debtor (the entity or individual filing for bankruptcy) continues to operate their business or manage their assets while the bankruptcy case is ongoing. In Chapter 11 bankruptcy, for example, the debtor may remain in control of their business operations and act as a "debtor in possession" rather than having a separate trustee appointed. This arrangement allows the debtor to continue running their affairs under the supervision of the bankruptcy court, implementing a reorganization plan to repay creditors and potentially emerge from bankruptcy with a restructured and viable business.
4) The concept of a "cram down" provision in a bankruptcy reorganization pertains to the ability of the bankruptcy court to approve a reorganization plan even if it is not accepted or agreed upon by all creditors. In a cram down, the court can confirm a plan over the objections of certain dissenting classes of creditors. This provision is typically used when a class of creditors rejects a proposed plan, and the court determines that the plan is fair, equitable, and meets certain legal requirements. The court has the authority to "cram down" the plan on the dissenting creditors, meaning their claims are modified or restructured according to the terms set forth in the approved plan. This allows the debtor to move forward with the reorganization, even if not all creditors are in agreement.
Learn more about bankruptcy trustee here:
https://brainly.com/question/31169803
#SPJ11
A steel company in Turkey decided to offer its shares for public subscription (IPO) with a paid-in capital of 1 million Turkish liras, and an equity value of 2 million Turkish liras on the balance sheet, with an expected total profit of 2 million Turkish liras. EBITDA 3 million Turkish liras. The average price/earnings ratio for publicly traded (industry average) steel companies is 10, and the industry's EV/EBITDA multiplier is 8. What IPO price would you expect for this company based on the multiplier method?
To determine the IPO price using the multiplier method, we need to calculate the valuation based on the price/earnings ratio and EV/EBITDA multiplier. Here's how we can do it:
Price/Earnings (P/E) ratio = 10
EV/EBITDA multiplier = 8
Expected total profit = 2 million Turkish liras
EBITDA = 3 million Turkish liras
First, we calculate the valuation based on the P/E ratio:
Valuation based on P/E ratio = Expected total profit * P/E ratio
Valuation based on P/E ratio = 2 million * 10 = 20 million Turkish liras
Next, we calculate the valuation based on the EV/EBITDA multiplier:
Valuation based on EV/EBITDA multiplier = EBITDA * EV/EBITDA multiplier
Valuation based on EV/EBITDA multiplier = 3 million * 8 = 24 million Turkish liras
To determine the IPO price, we take the average of the valuations:
IPO price = (Valuation based on P/E ratio + Valuation based on EV/EBITDA multiplier) / 2
IPO price = (20 million + 24 million) / 2 = 22 million Turkish liras
Therefore, based on the multiplier method, the expected IPO price for this steel company would be approximately 22 million Turkish liras.
Learn more about multiplier at
brainly.com/question/19538609
#SPJ11
how much of this expense was paid during the year or is currently payable? €answer 0 million
In the given statement, the answer to the question is that none of the expense was paid during the year or is currently payable.
Given information: The amount of the expense = €0 million We know that the amount of the expense is €0 million, which means that none of the expense was paid during the year or is currently payable. If there was an amount that was paid during the year or currently payable, then the answer would not be €0 million. Therefore, the answer to the question is that none of the expense was paid during the year or is currently payable.
To know more about expense visit:
brainly.com/question/29850561
#SPJ11
following are the differences between Conditional Sale and Credit Sale except A. In a Credit Sale price needs not be paid in installment: payment by installments is a requirement for a Conditional Sale B. In a Credit Sale property in the goods pass immediately to the buyer in a conditional Sale property passes in the future bu onditions C. The seller or owner needs to tell the buyer both orally and in writing, the cash price, or the hire purchase price, or the total the goods D. In a Credit Sale the cash price and total purchase price may be the same in a conditional Sale the total purchase price is his cash price Reset Selection
The main differences between Conditional Sale and Credit Sale include the requirement of payment in installments in a Conditional Sale, immediate ownership transfer in a Credit Sale, the disclosure of total purchase price in a Conditional Sale, and the potential difference between cash price and total purchase price in a Conditional Sale.
The main differences between Conditional Sale and Credit Sale are:
A. In a Credit Sale, the buyer may not be required to pay in installments, whereas payment by installments is a requirement for a Conditional Sale.
B. In a Credit Sale, the buyer immediately takes ownership of the goods, while in a Conditional Sale, ownership of the goods is transferred in the future, subject to certain conditions.
C. In both types of sales, the seller must inform the buyer of the cash price and hire purchase price, but in a Conditional Sale, the seller may also need to disclose the total purchase price.
D. In a Credit Sale, the cash price and total purchase price may be the same, while in a Conditional Sale, the total purchase price is usually higher than the cash price.
Learn more about ownership transfer here :-
https://brainly.com/question/31717950
#SPJ11
which is equivalent to ebit assuming the firm has no leverage?
Operating Income is equivalent to EBIT (Earnings Before Interest and Taxes) assuming the firm has no leverage.
EBIT stands for earnings before interest and taxes. It is a measure of a company's profitability that takes into account both operating income and non-operating income. However, assuming that the firm has no leverage, there would be no interest expense to deduct from operating income. Therefore, the equivalent measure to EBIT in this case would be operating income.
EBIT represents a company's earnings before accounting for interest expenses and taxes. When a firm has no leverage, it means it has no debt and thus, no interest expenses. In this case, EBIT is equivalent to operating income, which measures the profitability of the firm from its core business operations, excluding interest and taxes.
To know more about Operating Income visit:
https://brainly.com/question/32545534
#SPJ11