A magnetic field exerts a force of 0.25 N on an 8.0 cm length of wire carrying a current of 3.0 A at right angles to the field. Calculate the force that the same field would exert on another wire 20 cm long carrying the same current. I WILL GIVE BRAINLY

Answer:

  The acceleration would double

Explanation:

Assuming the same box and spring, the maximum acceleration is proportional to amplitude. When the amplitude doubles, the acceleration would double.

__

A spring is generally considered to have a linear force vs. distance characteristic. Hence, doubling the distance doubles the force. The acceleration is proportional to the force.

Answer:perpendicular

Explanation:

The electric current always generated the magnetic field that should be perpendicular to the field.

In the case when the work should be compassed when the pointing is to be done along with the magnetic field lines so this represent that there should be the magnetic field that should be near the wire via the current should be flowing. here the magnetic field generated by the electric current should always be perpendicular to the current flow direction.

Learn more about electric current here: https://brainly.com/question/24301101

Wood is a natural insulator due to air pockets within its cellular structure, which means that it is 15 times better than masonry, 400 times better than steel, and 1,770 times better than aluminum. In addition, lightweight wood framing methods allow easy installation of additional fibre or foil insulation. i hope this is better

The true of an image produced by this mirror will be 2.5 times smaller and virtual. Option C is correct.

When light beams from an object reflect off a mirror, they intersect with the picture of that thing called an image. Real and virtual images are the two sorts of images.

The ratio of xi to xo for a certain mirror is 2.5;

[tex]\rm \frac{x_i}{x_0} =2.5 \\\ x_i=2.5 x_0[/tex]

Where,

[tex]\rm x_0[/tex] is the true of an image produced by this mirror.

The true of an image produced by this mirror will be 2.5 times smaller and virtual.

Hence,option C is correct.

To learn more about the image refer to the link;

https://brainly.com/question/25029470

#SPJ1

Answer:

i = -12.7 cm; h =  5.07 cm

Explanation:

1. Find the focal length

The focal length of a concave spherical mirror is half of its radius of curvature.

f = ½r = ½ × 34.0 cm = 17.0 cm

2. Find the image distance

A convex mirror produces a virtual image behind the mirror, so the image distance is negative.

[tex]\begin{array}{rcl}\dfrac{1}{o} + \dfrac{1 }{i} & = & \dfrac{1}{f}\\\\\dfrac{1}{50.0} + \dfrac{1 }{i} & = & \dfrac{1}{-17.0}\\\\\dfrac{1}{i} & = & \dfrac{1}{-17.0} - \dfrac{1}{50.0}\\\\& = & \dfrac{50.0 - (-17.0)}{500\times(-17.0)}\\\\& = & \dfrac{67.0}{-850}\\\\i & = & \dfrac{-850}{67.0}\\\\& = & \textbf{-12.7 cm}\\\end{array}[/tex]

3. Find the image size

[tex]\begin{array}{rcl}\\\\\dfrac{h_{\text{i}}}{ h_{\text{o}}} & = & -\dfrac{i}{o} \\\\\dfrac{h_{\text{i}}}{ 20.0} & = & -\dfrac{-12.7}{50.0} \\\\h_{\text{i}} & = & 20.0 \times \dfrac{12.7}{50.0}\\\\& = & \textbf{5.07 cm}\\\end{array}[/tex]

Answer:

Into the page (negative z-axis)

Explanation:

We have a charge moving towards the left (as it is an electron we reverse the direction.)

We have an output motion downwards.

We know that the magnetic field would be in [tex]90^o[/tex] to both direction of charge and motion.

Using Fleming's Left Hand Rule.

Thumb for direction of thrust. (Downwards)

Field for direction of magnetic field (unknown)

Middle finger for direction of current (To the left)

We can determine that the magnetic field would be going into the negative z axis.

Answer:

acceleration = 45 m/s²

Time = 20 seconds

Explanation:

We are given;

Distance; s = 90m

Final velocity;v = 90 m/s

Since shot from rest, initial velocity;u = 0 m/s

So, to find the acceleration, we can use Newton's 2nd law of motion which is;

v² = u² + 2as

Where a is acceleration

Plugging in the values;

90² = 0² + 2a(90)

8100 = 180a

a = 8100/180

a = 45 m/s²

Now, for the time, we will use Newton's 1st law of motion which is;

v = u + at

Where t is time;

So;

90 = 0 + 4.5t

90 = 4.5t

t = 90/4.5

t = 20 seconds

Answer:

( About ) 1.1 cm / s

Explanation:

We know that the time it takes the clock's second hand to move is 60 seconds. Respectively the radius of this clock is given to be 10.5 centimeters.

_______________________________________________________

Let us apply the formula speed = distance traveled / time. Here the " distance traveled " is the circumference of the clock, or 2πr - where we can pose π as 3.14. In other words, Speed = 2πr / time. Substitute known values to solve for the Speed,

S = 2 * 3.14 * 10.5 / 60,

Speed = ( About ) 1.1 cm / s

Hope that helps!

Answer:

80 meters

Explanation:

Answer:

So the distance covered is 80meters

Explanation:

Speed=72km/h=20m/s

Time=4seconds

Distance covered=?

As we know that

Speed=distance covered/time taken

Speed*time taken=distance covered

Putting values

Distance covered=20m/s*4s

Distance covered =80meters

I hope it will help you

Answer:

  500 m

Explanation:

The applicable relation is ...

  wavelength = speed/frequency

  wavelength = (5000 m/s)/(10 cycles/s) = 500 m/cycle

The wavelength is 500 meters.

Answer:

you can see them in the night

Explanation:

also in the day they are there but you can't see it

Answer:

Hey!

Your answer is Circumpolar Stars!

Explanation:

These are stars which appear to revolve (spin/turn) around the polar axis (N and S) and do not set below the horizon.

Hope this helps!

Answer:2.01201

Explanation:

Answers:

In short, the boxes you check will be box 1, box 3, box 6.

================================================

Explanation:

It's not stated, but I'm assuming that A,B,C are three dimensional vectors

I'll go through each answer choice to say whether it's valid or not.

---------------------------

Choice 1

A x B is some vector

(A x B) x C is some other vector. Cross products produce vectors as outputs, when the two inputs are both 3D vectors. The output vector is the same dimension as the inputs.

Overall, the expression (A x B) x C is valid.

---------------------------

Choice 2

A dot B is a scalar

(A dot B)C is some vector

A dot (B x C) is a scalar

We cannot add a scalar to a vector. The given expression (A dot B)C + A dot (B x C) is not valid

---------------------------

Choice 3

B x C is a vector

B dot (B x C) is scalar

A[ B dot (B x C) ] is a vector in the form kA with k as a scalar.

The overall expression is valid

---------------------------

Choice 4

B x C is a vector

B(B x C) is not valid. We need to use a dot or cross symbol between the B and (B x C).

If we had kB with k as a scalar, then we don't need a symbol between them.

---------------------------

Choice 5

A dot B is a scalar

Scalars are not allowed when it comes to cross products, so (A dot B) crossed with anything is not valid.

---------------------------

Choice 6

B x C is some vector

A dot (B x C) results in a scalar

The expression is valid

Answer:

Hey!

I did this question and have the answers/potential things you can write!

XD

Explanation:

Here!

structure

•alpha particle consists of a helium nucleus

•alpha particle consists of 2 protons and 2 neutrons

•a beta particle is an electron

•a beta particle comes from the nucleus  

penetration

•alpha particles are very poorly penetrating

•alpha particles can penetrate a few cm in air

•alpha particles are absorbed by skin

•alpha particles are absorbed by thin paper

•beta particles can penetrate several metres of air

•beta particles can pass through thin metal plate / foil

•beta particles can travel further than alpha particles in air

•beta particles can travel further than alpha particles in materials eg metals  

deflection

•alpha particles and beta particles are deflected in opposite directions in an electric field

•beta particles are deflected more than alpha particles

•alpha particles have a greater charge than beta particles but beta particles have much less mass or beta particles have a greater specific charge than alpha particles

Hope this helps!

Sorry if it's a bit too long!

Answer:

Deposition

Explanation:

Answer:

deposition

Explanation:

qasdsfa32

Answer:

1) Measuring cylinder

2) Top Pan Balance

Explanation:

To find the density of the pebble Nabil should first accurately measure the mass of the pebble using the top pan balance

He should then fill the displacement can till the water reaches the outlet pipe at the to of the cylinder

He should then place the pebble into the cylinder carefully ans allow the water that would start coming out to stop

The volume of water in the displaced cylinder is then measured and the density is found by dividing the mass of the pebble by the volume of water in the measuring cylinder

[tex]Density \ of \ pebble = \dfrac{Pebble \ mass}{Volume \ of \ water \ in\ the \ measuring \ cylinder} = \dfrac{Pebble \ mass}{Water \ volume \ displaced}[/tex]

Explanation:

The angle of incidence is always smaller than the angle of refraction

Answer:

[tex]I=0.5 \:A[/tex]  is the correct answer.

Explanation:

Using the ohm's law, we have:

[tex]V=IR\\\\I=\frac{V}{R}=\frac{3}{6}\\\\I=0.5 \:A[/tex]

Best Regards!

Answer:

1960 J

Explanation:

EK = (18 kg + 62 kg)[tex](7.0 m/s)^{2}[/tex]/2 = 1960 J

Answer: a.troposphere

Explanation: Most of the mass (about 75-80%) of the atmosphere is in the troposphere. Almost all weather occurs within this layer. Air is warmest at the bottom of the troposphere near ground level. Higher up it gets colder. Air pressure and the density of the air are also less at high altitudes.

Answer:

Constant and positive constant

Explanation:

The object move with the same velocity at the same interval

Answer:

Cloth:

It is an insulator since it can't let electricity pass through

Dry Wood:

It is an insulator and can't conduct electricity.

Tap Water:

It is a good conductor as it contains dissolved salts.

Glass:

It is an insulator since it can't let electricity pass through.

Answer:

The correct option is;

B. Throughout all of history

Explanation:

A body of knowledge comprises of a given collection of concepts, activities and terms that represents a professional discipline that is outlined by the associated scholarly society, therefore, scientific knowledge, being comprised of very diverse field of knowledge, with different approaches and  changing understanding is taking as a process of learning about the universe data collection, experimenting analysis and communication with a theme of systems, equilibrium, models and constant change which makes the basis of the body of scientific knowledge to be throughout all of history.

Answer:

0

Explanation:

Displacement is a vector from initial to final point. Because initial and final point are the same, so displacement is 0.

it will experience great force

Answer: mammals may be relatively better at solving problems than birds.

Answer: A

Explanation:

mammals may be relatively better at solving problems than birds

Answer:

A rubber rod can be charged negatively when it is rubbed with wool. If the rubber rod is charged negatively, a positive charge is induced into the wool. Remember, whenever two neutral objects are rub against each other , an opposite charge is induced in both of the objects.

The impact on the charge of the wool should be explained below:

A rubber rod could be charged negatively at the time when it is rubbed with wool. In the case when the rubber rod is charged negatively, a positive charge should be induced into the wool. Also, whenever two neutral objects are rubbed against each other, an opposite charge should be induced in both of the objects.

Learn more about charge here: https://brainly.com/question/13030344

Answer:

26b) 66.7%

27) 500 N

Explanation:

26.a) In a two pulley system, the load is attached to one of the pulleys.  The other pulley is attached to a fixed surface, as well as one end of the rope.  The other end of the rope goes around moving pulley, then around the fixed pulley.

26.b) Mechanical advantage is the ratio between the forces:

MA = load force / effort force

Efficiency is the ratio between the work:

e = work done on load / work done by effort

Work is force times distance.

e = (F load × d load) / (F effort × d effort)

Rearranging:

e = (F load / F effort) × (d load / d effort)

e = MA × (d load / d effort)

In a two pulley system, the load moves half the distance of the effort.  So the efficiency is:

e = (4/3) × (1/2)

e = 2/3

e = 66.7%

27) In a three pulley system, the load moves a third of the distance of the effort.

e = (F load / F effort) × (d load / d effort)

0.40 = (600 N / F) × (1/3)

F = 500 N

Answer:

Explanation:

In projectile,

Maximum height = [tex]\frac{u^{2}sin^{2} \theta }{2g}[/tex] and range = [tex]\frac{u^{2}sin2\theta }{g}[/tex]

u = velocity of the body

[tex]\theta[/tex] = angle of launch

g = acceleration due to gravity

If the range equals the maximum height in an ideal projectile launch on a horizontal plane, this means;

[tex]\frac{u^{2}sin^{2} \theta }{2g} = \frac{u^{2}sin2\theta }{g}[/tex]

since [tex]sin2\theta = 2sin\theta cos\theta[/tex]

[tex]\frac{u^{2}sin^{2} \theta }{2g} = \frac{u^{2}2sin\theta cos\theta }{g}\\\frac{sin\theta}{2} =2cos\theta \\sin\theta = 4cos\theta\\\frac{sin\theta}{cos\theta} = 4\\tan\theta = 4\\\theta = tan^{-1} \\4\theta = 75.9^{0}[/tex]

The angle at which the range equals the maximum height in an ideal projectile launch on a horizontal plane is approximately 76°