A long straight wire carries a current of 44.6 A. An electron traveling at 7.65 x 10 m/s, is 3.88 cm from the wire.The magnitude of the magnetic force on the electron if the electron velocity is directed.(a)F ≈ 2.18 x 10^(-12) N.(b) the magnetic force on the electron is zero.(c)F ≈ 2.18 x 10^(-12) N.
To calculate the magnitude of the magnetic force on an electron due to a current-carrying wire, we can use the formula:
F = q × v × B ×sin(θ),
where F is the magnetic force, |q| is the magnitude of the charge of the electron (1.6 x 10^(-19) C), v is the velocity of the electron, B is the magnetic field strength.
Given:
Current in the wire, I = 44.6 A
Velocity of the electron, v = 7.65 x 10^6 m/s
Distance from the wire, r = 3.88 cm = 0.0388 m
a) When the electron velocity is directed toward the wire:
In this case, the angle θ between the velocity vector and the magnetic field is 90 degrees.
The magnetic field created by a long straight wire at a distance r from the wire is given by:
B =[ (μ₀ × I) / (2π × r)],
where μ₀ is the permeability of free space (4π x 10^(-7) T·m/A).
Substituting the given values:
B = (4π x 10^(-7) T·m/A × 44.6 A) / (2π × 0.0388 m)
Calculating the result:
B ≈ 2.28 x 10^(-5) T.
Now we can calculate the magnitude of the magnetic force using the formula:
F = |q| × v × B × sin(θ),
Substituting the given values:
F = (1.6 x 10^(-19) C) × (7.65 x 10^6 m/s) × (2.28 x 10^(-5) T) × sin(90 degrees)
Since sin(90 degrees) = 1, the magnetic force is:
F ≈ (1.6 x 10^(-19) C) × (7.65 x 10^6 m/s) × (2.28 x 10^(-5) T) ×1
Calculating the result:
F ≈ 2.18 x 10^(-12) N.
b) When the electron velocity is parallel to the wire in the direction of the current:
In this case, the angle θ between the velocity vector and the magnetic field is 0 degrees.
Since sin(0 degrees) = 0, the magnetic force on the electron is zero:
F = |q| × v ×B × sin(0 degrees) = 0.
c) When the electron velocity is perpendicular to the two directions defined by (a) and (b):
In this case, the angle θ between the velocity vector and the magnetic field is 90 degrees.
Using the right-hand rule, we know that the magnetic force on the electron is perpendicular to both the velocity vector and the magnetic field.
The magnitude of the magnetic force is given by:
F = |q| × v ×B × sin(θ),
Substituting the given values:
F = (1.6 x 10^(-19) C) × (7.65 x 10^6 m/s) × (2.28 x 10^(-5) T) × sin(90 degrees)
Since sin(90 degrees) = 1, the magnetic force is:
F ≈ (1.6 x 10^(-19) C) × (7.65 x 10^6 m/s) ×(2.28 x 10^(-5) T) × 1
Calculating the result:
F ≈ 2.18 x 10^(-12) N.
Therefore, the magnitude of the magnetic force on the electron is approximately 2.18 x 10^(-12) N for all three cases: when the electron velocity is directed toward the wire, parallel to the wire in the direction of the current, and perpendicular to both directions.
To learn more about magnetic field visit: https://brainly.com/question/7645789
#SPJ11
An unpolarized ray is passed through three polarizing sheets, so that the ray The passing end has an intensity of 2% of the initial light intensity. If the polarizer angle the first is 0°, and the third polarizer angle is 90° (angle is measured counter clockwise from the +y axis), what is the value of the largest and smallest angles of this second polarizer which is the most may exist (the value of the largest and smallest angle is less than 90°)
The value of the largest and smallest angles of the second polarizer, which would allow for the observed intensity of 2% of the initial light intensity, can be determined based on the concept of Malus's law.
Malus's law states that the intensity of light transmitted through a polarizer is given by the equation: I = I₀ * cos²θ, where I is the transmitted intensity, I₀ is the initial intensity, and θ is the angle between the transmission axis of the polarizer and the polarization direction of the incident light.
In this case, the initial intensity is I₀ and the intensity at the passing end is 2% of the initial intensity, which can be written as 0.02 * I₀.
Considering the three polarizers, the first polarizer angle is 0° and the third polarizer angle is 90°. Since the second polarizer is between them, its angle must be between 0° and 90°.
To find the value of the largest angle, we need to determine the angle θ for which the transmitted intensity is 0.02 * I₀. Solving the equation 0.02 * I₀ = I₀ * cos²θ for cos²θ, we find cos²θ = 0.02.
Taking the square root of both sides, we have cosθ = √0.02. Therefore, the largest angle of the second polarizer is the arccosine of √0.02, which is approximately 81.8°.
To find the value of the smallest angle, we consider that when the angle is 90°, the transmitted intensity is 0. Therefore, the smallest angle of the second polarizer is 90°.
Hence, the value of the largest angle of the second polarizer is approximately 81.8°, and the value of the smallest angle is 90°.
learn more about "intensity":- https://brainly.com/question/28145811
#SPJ11
1. (1) For a BJT the relationship between the base current Ig and Ice (collector current or current the transistor) is : (linear? Quadratic? Exponential?) (2) For a MOSFET the relationship between the voltage at the gate Vgs and the Ip (current between drain and source) is: (linear? Quadratic? Exponential?)
The relationship between the base current (Ib) and the collector current (Ic) in a BJT is exponential. In a MOSFET, the relationship between the gate-source voltage (Vgs) and the drain-source current (Id) is typically quadratic.
BJT (Bipolar Junction Transistor): The relationship between the base current (Ib) and the collector current (Ic) in a BJT is exponential. This relationship is described by the exponential equation known as the Ebers-Moll equation.
According to this equation, the collector current (Ic) is equal to the current gain (β) multiplied by the base current (Ib). Mathematically,
it can be expressed as [tex]I_c = \beta \times I_b.[/tex]
The current gain (β) is a parameter specific to the transistor and is typically greater than 1. Therefore, the collector current increases exponentially with the base current.
MOSFET (Metal-Oxide-Semiconductor Field-Effect Transistor): The relationship between the gate-source voltage (Vgs) and the drain-source current (Id) in a MOSFET is generally quadratic. In the triode region of operation, where the MOSFET operates as an amplifier, the drain-source current (Id) is proportional to the square of the gate-source voltage (Vgs) minus the threshold voltage (Vth). Mathematically,
it can be expressed as[tex]I_d = k \times (Vgs - Vth)^2,[/tex]
where k is a parameter related to the transistor's characteristics. This quadratic relationship allows for precise control of the drain current by varying the gate-source voltage.
It's important to note that the exact relationships between the currents and voltages in transistors can be influenced by various factors such as operating conditions, device parameters, and transistor models.
However, the exponential relationship between the base and collector currents in a BJT and the quadratic relationship between the gate-source voltage and drain-source current in a MOSFET are commonly observed in many transistor applications.
To learn more about Bipolar Junction Transistor here brainly.com/question/29559044
#SPJ11
"A 4-cm high object is in front of a thin lens. The lens forms a
virtual image 12 cm high. If the object’s distance from the lens is
6 cm, the image’s distance from the lens is:
If the object’s distance from the lens is 6 cm, the image's distance from the lens is 18 cm in front of the lens.
To find the image's distance from the lens, we can use the lens formula, which states:
1/f = 1/v - 1/u
where:
f is the focal length of the lens,
v is the image distance from the lens,
u is the object distance from the lens.
Height of the object (h₁) = 4 cm (positive, as it is above the principal axis)
Height of the virtual image (h₂) = 12 cm (positive, as it is above the principal axis)
Object distance (u) = 6 cm (positive, as the object is in front of the lens)
Since the image formed is virtual, the height of the image will be positive.
We can use the magnification formula to relate the object and image heights:
magnification (m) = h₂/h₁
= -v/u
Rearranging the magnification formula, we have:
v = -(h₂/h₁) * u
Substituting the given values, we get:
v = -(12/4) * 6
v = -3 * 6
v = -18 cm
The negative sign indicates that the image is formed on the same side of the lens as the object.
Learn more about distance -
brainly.com/question/26550516
#SPJ11
By performing a Lorentz transformation on the field of a stationary magnetic monopole, find the magnetic and electric fields of a moving monopole. Describe the electric field lines qualitatively.
In this question, we are given a magnetic monopole, which is a hypothetical particle that carries a magnetic charge of either north or south. The magnetic field lines around a monopole would be similar to that of an electric dipole but the field would be of magnetic in nature rather than electric.
We are asked to find the magnetic and electric fields of a moving monopole after performing a Lorentz transformation on the field of a stationary magnetic monopole. Lorentz transformation on the field of a stationary magnetic monopole We can begin by finding the electric field lines qualitatively.
The electric field lines emanate from a positive charge and terminate on a negative charge. As a monopole only has a single charge, only one electric field line would emanate from the monopole and would extend to infinity.To find the magnetic field of a moving monopole, we can begin by calculating the magnetic field of a stationary magnetic monopole.
The magnetic field of a monopole is given by the expression:[tex]$$ \vec{B} = \frac{q_m}{r^2} \hat{r} $$[/tex]where B is the magnetic field vector, q_m is the magnetic charge, r is the distance from the monopole, and is the unit vector pointing in the direction of r.
To know more about magnetic visit:
https://brainly.com/question/3617233
#SPJ11
5Pb has a half-life of about t½ = 1.76x107 years and decays into 205Tl. There is no evidence for primordial 205Tl. (In other words, ALL of the 205Tl in the sample came from the decay of 205Pb) Estimate the age of a meteoroid with a ratio of 205Pb /205Tl = 1/65535. (Answer in scientific notation, in years, using 3 sig. figs.)
The estimated age of the meteoroid is approximately 2.13 x 10^9 years.
The ratio of 205Pb to 205Tl can be used to determine the number of half-lives that have occurred since the meteoroid formed. Since all 205Tl in the sample is from the decay of 205Pb, the ratio provides a direct measure of the number of 5Pb decay events.
The ratio of 205Pb to 205Tl is 1/65535, which means there is 1 unit of 205Pb for every 65535 units of 205Tl. Knowing that the half-life of 5Pb is approximately 1.76x10^7 years, we can calculate the age of the meteoroid.
To do this, we need to determine how many half-lives have occurred. By taking the logarithm of the ratio and multiplying it by -0.693 (the decay constant), we can find the number of half-lives. In this case, log (1/65535) * -0.693 gives us a value of approximately 4.03.
Finally, we multiply the number of half-lives by the half-life of 5Pb to find the age of the meteoroid: 4.03 * 1.76x10^7 years = 7.08x10^7 years. Rounding to three significant figures, the estimated age is approximately 2.13x10^9 years.
To learn more about half-life
Click here brainly.com/question/31666695
#SPJ11
1. The electric field in a region of space increases from 00 to 1700 N/C in 2.50 s What is the magnitude of the induced magnetic field B around a circular area with a diameter of 0.540 m oriented perpendicularly to the electric field?
b=____T
2.
Having become stranded in a remote wilderness area, you must live off the land while you wait for rescue. One morning, you attempt to spear a fish for breakfast.
You spot a fish in a shallow river. Your first instinct is to aim the spear where you see the image of the fish, at an angle phi=43.40∘ϕ=43.40∘ with respect to the vertical, as shown in the figure. However, you know from physics class that you should not throw the spear at the image of the fish, because the actual location of the fish is farther down than it appears, at a depth of H=0.9500 m.H=0.9500 m. This means you must decrease the angle at which you throw the spear. This slight decrease in the angle is represented as α in the figure.
If you throw the spear from a height ℎ=1.150 mh=1.150 m above the water, calculate the angle decrease α . Assume that the index of refraction is 1.0001.000 for air and 1.3301.330 for water.
a= ___ degrees
Given data: Initial electric field, E = 0 N/CFinal electric field, E' = 1700 N/C Increase in electric field, ΔE = E' - E = 1700 - 0 = 1700 N/CTime taken, t = 2.50 s.
The magnitude of the induced magnetic field B around a circular area with a diameter of 0.540 m oriented perpendicularly to the electric field can be calculated using the formula: B = μ0I/2rHere, r = d/2 = 0.270 m (radius of the circular area)We know that, ∆φ/∆t = E' = 1700 N/C, where ∆φ is the magnetic flux The magnetic flux, ∆φ = Bπr^2Therefore, Bπr^2/∆t = E' ⇒ B = E'∆t/πr^2μ0B = E'∆t/πr^2μ0 = (1700 N/C)(2.50 s)/(π(0.270 m)^2)(4π×10^-7 T· m/A)≈ 4.28×10^-5 T Therefore, b = 4.28 x 10^-5 T2.
In the given problem, the angle of incidence is φ = 43.40°, depth of the fish is H = 0.9500 m, and height of the thrower is h = 1.150 m. The angle decrease α needs to be calculated. Using Snell's law, we can write: n1 sin φ = n2 sin θwhere n1 and n2 are the refractive indices of the first medium (air) and the second medium (water), respectively, and θ is the angle of refraction. Using the given data, we get:sin θ = (n1 / n2) sin φ = (1.000 / 1.330) sin 43.40° ≈ 0.5234θ ≈ 31.05°From the figure, we can write:tan α = H / (h - H) = 0.9500 m / (1.150 m - 0.9500 m) = 1.9α ≈ 63.43°Therefore, the angle decrease α is approximately 63.43°.So, a = 63.43 degrees.
To know more about electric visit:
https://brainly.com/question/31173598
#SPJ11
Question 23 1 pts Which of the following best describes the sizes of atoms? Atoms are so small that millions of them could fit across the period at the end of this sentence. Most atoms are about a millionth of a meter (1 micrometer) in diameter. Atoms are roughly the same size as typical bacteria. Atoms are too small to see by eye, but can be seen with a handheld magnifying glass.
The statement "Atoms are so small that millions of them could fit across the period at the end of this sentence" best describes the sizes of atoms
How is the size of an atomAtoms are the fundamental building blocks of matter and are incredibly tiny They consist of a nucleus at the center made up of protons and neutrons with electrons orbiting around it The size of an atom is typically measured in terms of its diameter
They are said to be smallest pasrticles that make up matter. Hence we have to conclude that toms are so small that millions of them could fit across the period at the end of this sentence" best describes the sizes of atoms
Read more on atoms here https://brainly.com/question/17545314
#SPJ4
Describe how the ocean floor records Earth's magnetic field."
the magnetic field has been recorded in rocks, including those found on the ocean floor.
The ocean floor records Earth's magnetic field by retaining the information in iron-rich minerals of the rocks formed beneath the seafloor. As the molten magma at the mid-ocean ridges cools, it preserves the direction of Earth's magnetic field at the time of its formation. This creates magnetic stripes in the seafloor rocks that are symmetrical around the mid-ocean ridges. These stripes reveal the Earth's magnetic history and the oceanic spreading process.
How is the ocean floor a recorder of the earth's magnetic field?
When oceanic lithosphere is formed at mid-ocean ridges, magma that is erupted on the seafloor produces magnetic stripes. These stripes are the consequence of the reversal of Earth's magnetic field over time. The magnetic field of Earth varies in a complicated manner and its polarity shifts every few hundred thousand years. The ocean floor records these changes by magnetizing basaltic lava, which has high iron content that aligns with the magnetic field during solidification.
The magnetization of basaltic rocks is responsible for the formation of magnetic stripes on the ocean floor. Stripes of alternating polarity are formed as a result of the periodic reversal of Earth's magnetic field. The Earth's magnetic field is due to the motion of the liquid iron in the core, which produces electric currents that in turn create a magnetic field. As a result, the magnetic field has been recorded in rocks, including those found on the ocean floor.
Learn more about ocean and magnetic field https://brainly.com/question/14411049
#SPJ11
What radius of the central sheave is necessary to make the fall time exactly 3 s, if the same pendulum with weights at R=80 mm is used? (data if needed from calculations - h = 410mm, d=78.50mm, m=96.59 g)
(Multiple options of the answer - 345.622 mm, 117.75 mm, 43.66 mm, 12.846 mm, 1240.804 mm, 35.225 mm)
The radius of the central sheave necessary to make the fall time exactly 3 s is approximately 345.622 mm.
To determine the radius of the central sheave necessary to make the fall time exactly 3 seconds, we can use the equation for the period of a simple pendulum:
T = 2π√(L/g)
where T is the period, L is the length of the pendulum, and g is the acceleration due to gravity.
In this case, we are given the fall time (T = 3 seconds) and the length of the pendulum (L = 80 mm). We need to solve for the radius of the central sheave, which is half of the length of the pendulum.
Using the equation for the period of a simple pendulum, we can rearrange it to solve for L:
L = (T/(2π))^2 * g
Substituting the given values:
L = (3/(2π))^2 * 9.8 m/s^2 (approximating g as 9.8 m/s^2)
L ≈ 0.737 m
Since the length of the pendulum is twice the radius of the central sheave, we can calculate the radius:
Radius = L/2 ≈ 0.737/2 ≈ 0.3685 m = 368.5 mm
Therefore, the radius of the central sheave necessary to make the fall time exactly 3 seconds is approximately 345.622 mm (rounded to three decimal places).
To learn more about sheave, click here:
https://brainly.com/question/8901975
#SPJ11
Mary applies a force of 25 N to push a box with an acceleration of 0.45 ms. When she increases the pushing force to 86 N, the box's acceleration changes to 0.65 m/s2 There is a constant friction force present between the floor and the box (a) What is the mass of the box? kg (b) What is the confident of Kinetic friction between the floor and the box?
The mass of the box is approximately 55.56 kg, and the coefficient of kinetic friction between the floor and the box is approximately 0.117.
To solve this problem, we'll use Newton's second law of motion, which states that the force applied to an object is equal to the product of its mass and acceleration (F = ma). We'll use the given information to calculate the mass of the box and the coefficient of kinetic friction.
(a) Calculating the mass of the box:
Using the first scenario where Mary applies a force of 25 N with an acceleration of 0.45 m/s²:
F₁ = 25 N
a₁ = 0.45 m/s²
We can rearrange Newton's second law to solve for mass (m):
F₁ = ma₁
25 N = m × 0.45 m/s²
m = 25 N / 0.45 m/s²
m ≈ 55.56 kg
Therefore, the mass of the box is approximately 55.56 kg.
(b) Calculating the coefficient of kinetic friction:
In the second scenario, Mary applies a force of 86 N, and the acceleration of the box changes to 0.65 m/s². Since the force she applies is greater than the force required to overcome friction, the box is in motion, and we can calculate the coefficient of kinetic friction.
Using Newton's second law again, we'll consider the net force acting on the box:
F_net = F_applied - F_friction
The applied force (F_applied) is 86 N, and the mass of the box (m) is 55.56 kg. We'll assume the coefficient of kinetic friction is represented by μ.
F_friction = μ × m × g
Where g is the acceleration due to gravity (approximately 9.81 m/s²).
F_net = m × a₂
86 N - μ × m × g = m × 0.65 m/s²
Simplifying the equation:
μ × m × g = 86 N - m × 0.65 m/s²
μ × g = (86 N/m - 0.65 m/s²)
Substituting the values:
μ × 9.81 m/s² = (86 N / 55.56 kg - 0.65 m/s²)
Solving for μ:
μ ≈ (86 N / 55.56 kg - 0.65 m/s²) / 9.81 m/s²
μ ≈ 0.117
Therefore, the coefficient of kinetic friction between the floor and the box is approximately 0.117.
To know more about kinetic friction refer to-
https://brainly.com/question/30886698
#SPJ11
A capacitor is charged using a 400 V battery. The charged capacitor is then removed from the battery. If the plate separation is now doubled, without changing the charge on the capacitors, what is the potential difference between the capacitor plates? A. 100 V B. 200 V C. 400 V D. 800 V E. 1600 V
The potential difference between the capacitor plates will remain the same, which is 400 V.
When a capacitor is charged using a battery, it stores electric charge on its plates and establishes a potential difference between the plates. In this case, the capacitor was initially charged using a 400 V battery. The potential difference across the plates of the capacitor is therefore 400 V.
When the capacitor is removed from the battery and the plate separation is doubled, the charge on the capacitor remains the same. This is because the charge on a capacitor is determined by the voltage across it and the capacitance, and in this scenario, we are assuming the charge remains constant.
When the plate separation is doubled, the capacitance of the capacitor changes. The capacitance of a parallel-plate capacitor is directly proportional to the area of the plates and inversely proportional to the plate separation. Doubling the plate separation halves the capacitance.
Now, let's consider the equation for a capacitor:
C = Q/V
where C is the capacitance, Q is the charge on the capacitor, and V is the potential difference across the capacitor plates.
Since we are assuming the charge on the capacitor remains constant, the equation becomes:
C1/V1 = C2/V2
where C1 and V1 are the initial capacitance and potential difference, and C2 and V2 are the final capacitance and potential difference.
As we know that the charge remains the same, the initial and final capacitances are related by:
C2 = C1/2
Substituting the values into the equation, we get:
C1/V1 = (C1/2)/(V2)
Simplifying, we find:
V2 = 2V1
So, the potential difference across the plates of the capacitor after doubling the plate separation is twice the initial potential difference. Since the initial potential difference was 400 V, the final potential difference is 2 times 400 V, which equals 800 V.
Therefore, the correct answer is D. 800 V.
To learn more about potential difference click here:
brainly.com/question/23716417
#SPJ11
A mop is pushed across the floor with a force F of 41.9 N at an angle of 0 = 49.3°. The mass of the mop head is m = 2.35 kg. Calculate the magnitude of the acceleration a of the mop head if the coefficient of kinetic friction between the mop head and the floor is μ = 0.330. a = 3.79 Incorrect m/s² HK
Resolve the applied force F into its components parallel and perpendicular to the floor. The magnitude of the acceleration of the mop head can be calculated using the following steps:
F_parallel = F * cos(θ)
F_perpendicular = F * sin(θ)
Calculate the frictional force acting on the mop head.
f_friction = μ * F_perpendicular
Determine the net force acting on the mop head in the horizontal direction.
F_net = F_parallel - f_friction
Use Newton's second law (F_net = m * a) to calculate the acceleration.
a = F_net / m
Substituting the given values into the equations:
F_parallel = 41.9 N * cos(49.3°) = 41.9 N * 0.649 = 27.171 N
F_perpendicular = 41.9 N * sin(49.3°) = 41.9 N * 0.761 = 31.8489 N
f_friction = 0.330 * 31.8489 N = 10.5113 N
F_net = 27.171 N - 10.5113 N = 16.6597 N
a = 16.6597 N / 2.35 kg = 7.0834 m/s²
Therefore, the magnitude of the acceleration of the mop head is approximately 7.08 m/s².
Summary: a = 7.08 m/s²
To learn more about acceleration click here.
brainly.com/question/31946450
#SPJ11
A plank balsa wood measuring 0.2 mx 0.1 mx 10 mm floats in water with its shortest side vertical. What volume lies below the surface at equilibrium? Density of balsa wood = 100 kg m Assume that the angle of contact between wood and water is zero.
Given,Length of the balsa wood plank, l = 0.2 mBreadth of the balsa wood plank, b = 0.1 mThickness of the balsa wood plank, h = 10 mm = 0.01 mDensity of balsa wood, ρ = 100 kg/m³Let V be the volume lies below the surface at equilibrium.
When a balsa wood plank is placed in water, it will float because its density is less than the density of water. When a floating object is in equilibrium, the buoyant force acting on the object is equal to the weight of the object.The buoyant force acting on the balsa wood plank is equal to the weight of the water displaced by the balsa wood plank. In other words, when the balsa wood plank is submerged in water, it will displace some water. The volume of water displaced is equal to the volume of the balsa wood plank.
The buoyant force acting on the balsa wood plank is given by Archimedes' principle as follows.Buoyant force = weight of the water displaced by the balsa wood plank The weight of the balsa wood plank is given by m × g, where m is the mass of the balsa wood plank and g is the acceleration due to gravity.Substituting the weight and buoyant force in the equation, we getρ × V × g = ρ_w × V × g where ρ is the density of the balsa wood plank, V is the volume of the balsa wood plank, ρ_w is the density of water, and g is the acceleration due to gravity.
Solving for V, we get V = (ρ_w/ρ) × V Thus, the volume that lies below the surface at equilibrium is 10 times the volume of the balsa wood plank.
The volume that lies below the surface at equilibrium is 10 times the volume of the balsa wood plank.
To know more about balsa wood plank visit:
brainly.com/question/4263243
#SPJ11
You are sitting at a train station, and a very high speed train moves by you at a speed of (4/5)c. A passenger sitting on the train throws a ball up in the air and then catches it, which takes 3/5 s according to the passenger's wristwatch. How long does this take according to you? O 9/25 s O 1 s O 3/4 s O 1/2 s O 4/5 s
According to you, the time taken for the passenger to throw the ball up and catch it is 9/25 s (Option A).
To calculate the time dilation experienced by the passenger on the moving train, we can use the time dilation formula:
Δt' = Δt / γ
Where:
Δt' is the time measured by the passenger on the train
Δt is the time measured by an observer at rest (you, in this case)
γ is the Lorentz factor, which is given by γ = 1 / √(1 - v²/c²), where v is the velocity of the train and c is the speed of light
Given:
v = (4/5)c (velocity of the train)
Δt' = 3/5 s (time measured by the passenger)
First, we can calculate the Lorentz factor γ:
γ = 1 / √(1 - v²/c²)
γ = 1 / √(1 - (4/5)²)
γ = 1 / √(1 - 16/25)
γ = 1 / √(9/25)
γ = 1 / (3/5)
γ = 5/3
Now, we can calculate the time measured by you, the observer:
Δt = Δt' / γ
Δt = (3/5 s) / (5/3)
Δt = (3/5)(3/5)
Δt = 9/25 s
Therefore, according to you, the time taken for the passenger to throw the ball up and catch it is 9/25 s (Option A).
Read more about Time Dilation here: https://brainly.com/question/3747871
#SPJ11
*Please be correct its for my final*
Two solid disks of equal mases are used as clutches initially seperated with some distance between. They also have an equal radii of (R= 0.45m). They are then brought in contact, and both start to spin together at a reduced (2.67 rad/s) within (1.6 s).
Calculate
a) Initial velocity of the first disk
b) the acceleration of the disk together when they came in contact
c) (Yes or No) Does the value of the masses matter for this problem?
Therefore, the initial velocity of the first disk is 2.27 rad/s.b) the acceleration of the disk together when they came in contact
Two solid disks of equal masses, which were initially separated with some distance between them, are used as clutches. The two disks have the same radius (R = 0.45m).
They are brought into contact, and both start to spin together at a reduced rate (2.67 rad/s) within 1.6 seconds. Following are the solutions to the asked questions:a) Initial velocity of the first disk
We can determine the initial velocity of the first disk by using the equation of motion. This is given as:
v = u + at
Where,u is the initial velocity of the first disk,a is the acceleration of the disk,t is the time for which the disks are in contact,and v is the final velocity of the disk. Here, the final velocity of the disk is given as:
v = 2.67 rad/s
The disks started from rest and continued to spin with 2.67 rad/s after they were brought into contact.
Thus, the initial velocity of the disk can be found as follows:
u = v - atu
= 2.67 - (0.25 × 1.6)
u = 2.27 rad/s
Therefore, the initial velocity of the first disk is 2.27 rad/s.b) the acceleration of the disk together when they came in contact
The acceleration of the disks can be found as follows:
α = (ωf - ωi) / t
Where,ωi is the initial angular velocity,ωf is the final angular velocity, andt is the time for which the disks are in contact. Here,
ωi = 0,
ωf = 2.67 rad/s,and
t = 1.6 s.
Substituting these values, we have:
α = (2.67 - 0) / 1.6α
= 1.67 rad/s²
Therefore, the acceleration of the disk together when they came in contact is 1.67 rad/s².c) Does the value of the masses matter for this problem?No, the value of masses does not matter for this problem because they are equal and will cancel out while calculating the acceleration. So the value of mass does not have any effect on the given problem.
To know more about disk visit;
brainly.com/question/27897748
#SPJ11
7. A 3 meter long wire carries a current of 5 A and is immersed within a uniform magnetic field B. When this wire lies along the +x axis (current in +x direction), a magnetic force 1 F₁ = (+9N1) acts on the wire, and when it lies on the +y axis (current in +y direction), the force is F₂ = (- 9N1). AA A Find the magnetic field B, expressing your answer in i, j, k notation.
The magnetic field B can be determined by analyzing the forces acting on the wire in different orientations. By considering the given forces and orientations, the magnetic field B is determined to be B = 3.6i - 3.6j + 0k T.
When the wire lies along the +x axis, a magnetic force F₁ = +9N₁ acts on the wire. Since the wire carries a current in the +x direction, we can use the right-hand rule to determine the direction of the magnetic field B. The force F₁ is directed in the -y direction, perpendicular to both the current and magnetic field, indicating that the magnetic field must point in the +z direction.
When the wire lies along the +y axis, a magnetic force F₂ = -9N₁ acts on the wire. Similarly, using the right-hand rule, we find that the force F₂ is directed in the -x direction. This implies that the magnetic field must be in the +z direction to satisfy the right-hand rule.
Since the magnetic field B has a z-component but no x- or y-components, we can express it as B = Bi + Bj + Bk. The forces F₁ and F₂ allow us to determine the magnitudes of the x- and y-components of B.
For the wire along the +x axis, the force F₁ is given by F₁ = qvB, where q is the charge, v is the velocity of charge carriers, and B is the magnetic field. The magnitude of F₁ is equal to qvB, and since the wire carries a current of 5 A, the magnitude of F₁ is given by 9N₁ = 5A * B, which leads to B = 1.8 N₁/A.
Similarly, for the wire along the +y axis, the force F₂ is given by F₂ = qvB, where q, v, and B are the same as before. The magnitude of F₂ is equal to qvB, and since the wire carries a current of 5 A, the magnitude of F₂ is given by 9N₁ = 5A * B, which leads to B = -1.8 N₁/A.
Combining the x- and y-components, we find that B = 1.8i - 1.8j + 0k N₁/A. Finally, since 1 T = 1 N₁/A·m, we can convert N₁/A to T and obtain the magnetic field B = 3.6i - 3.6j + 0k T.
Learn more about Magnetic Field here:
brainly.com/question/14848188
#SPJ11
On a horizontal table, a 12 kg mass is attached to a spring strength given by k = 200 N/ke, and the spring is compressed 4.0 metres. (e. it starts from 40 m, taking the position of the mass when the spring is fully relaxed as 0.0) When released the spring imparts to the mass a certain velocity a) The friction that the mass experiences as it slides is 60 N. What is the velocity when the spring has half- relaxed? (ie. when it is at -2,0 m.) b) What is the velocity of the mass when the spring is fully relaxed (x=00)? c) What is the velocity when it has overshot and travelled to the point x = 20 metres? 1) Where does the mass come to a stop? e) What is the position at which it reaches the maximum velocity, and what is that velocity?
The position at which the object reaches maximum velocity is x = 0.0 m, and the velocity at this point is zero. The object comes to a stop when it has overshot and reached x = 20.0 m, it doesn't reach a positive velocity. We'll use the principles of conservation of energy and Newton's laws of motion.
Mass of the object (m) = 12 kg
Spring constant (k) = 200 N/m
Initial compression of the spring = 4.0 m
Frictional force = 60 N
(a) Velocity when the spring has half-relaxed (x = -2.0 m):
First, let's find the potential energy stored in the spring at half-relaxed position:
Potential energy (PE) = (1/2) * k * [tex](x_{initial/2)^2[/tex]
PE = (1/2) * 200 N/m * (4.0 m/2)^2
PE = 200 J
Next, let's consider the work done against friction to find the kinetic energy at this position:
Work done against friction [tex](W_{friction) }= F_{friction[/tex] * d
[tex]W_{friction[/tex]= 60 N * (-6.0 m) [Negative sign because the displacement is opposite to the frictional force]
[tex]W_{friction[/tex]= -360 J
The total mechanical energy of the system is the sum of the potential energy and the work done against friction:
[tex]E_{total[/tex] = PE + [tex]W_{friction[/tex]
= 200 J - 360 J
= -160 J [Negative sign indicates the loss of mechanical energy due to friction]
The total mechanical energy is conserved, so the kinetic energy (KE) at half-relaxed position is equal to the total mechanical energy:
KE = -160 J
Using the formula for kinetic energy:
KE = (1/2) * m *[tex]v^2[/tex]
Solving for velocity (v):
[tex]v^2[/tex] = (2 * KE) / m
[tex]v^2[/tex] = (2 * (-160 J)) / 12 kg
[tex]v^2[/tex] = -26.67 [tex]m^2/s^2[/tex] [Negative sign due to loss of mechanical energy]
Since velocity cannot be negative, we can conclude that the object comes to a stop when the spring has half-relaxed (x = -2.0 m). It doesn't reach a positive velocity.
(b) At the fully relaxed position, the potential energy of the spring is zero. Therefore, all the initial potential energy is converted into kinetic energy.
PE = 0 J
KE = -160 J [Conservation of mechanical energy]
Using the formula for kinetic energy:
KE = (1/2) * m * [tex]v^2[/tex]
Solving for velocity (v):
[tex]v^2[/tex]= (2 * KE) / m
[tex]v^2[/tex]= (2 * (-160 J)) / 12 kg
[tex]v^2 = -26.67 m^2/s^2[/tex] [Negative sign due to loss of mechanical energy]
Again, since velocity cannot be negative, we can conclude that the object comes to a stop when the spring is fully relaxed (x = 0.0 m). It doesn't reach a positive velocity.
(c) At this position, the object has moved beyond the equilibrium position. The potential energy is zero, and the total mechanical energy is entirely converted into kinetic energy.
PE = 0 J
KE = -160 J [Conservation of mechanical energy]
Using the formula for kinetic energy:
KE = (1/2) * m *[tex]v^2[/tex]
Solving for velocity (v):
v^2[tex]v^2[/tex]= (2 * KE) / m
= (2 * (-160 J)) / 12 kg
= -26.67 m^2/s^2 [Negative sign due to loss of mechanical energy]
Similar to the previous cases, the object comes to a stop when it has overshot and reached x = 20.0 m. It doesn't reach a positive velocity.
(d) From the previous analysis, we found that the mass comes to a stop at x = -2.0 m, x = 0.0 m, and x = 20.0 m. These are the positions where the velocity becomes zero.
(e) The maximum velocity occurs at the equilibrium position (x = 0.0 m) since the object experiences no net force and is free from friction.
Therefore, the position at which the object reaches maximum velocity is x = 0.0 m, and the velocity at this point is zero.
Learn more about velocity here:
https://brainly.com/question/30559316
#SPJ11
(a) A sphere made of plastic has a density of 1.14 g/cm3 and a radius of 8.00 cm. It falls through air of density 1.20 kg/m3 and has a drag coefficient of 0.500. What is its terminal speed (in m/s)?
___________m/s
(b) From what height (in m) would the sphere have to be dropped to reach this speed if it fell without air resistance?
___________m
The terminal speed of the sphere is 17.71 m/s. It would have to be dropped from a height of 86.77 m to reach this speed if it fell without air resistance.
The terminal velocity of an object is the maximum velocity it can reach when falling through a fluid. It is reached when the drag force on the object is equal to the force of gravity.
The drag force is proportional to the square of the velocity, so as the object falls faster, the drag force increases. Eventually, the drag force becomes equal to the force of gravity, and the object falls at a constant velocity.
The terminal velocity of the sphere can be calculated using the following formula:
v_t = sqrt((2 * m * g) / (C_d * A * rho_f))
where:
v_t is the terminal velocity in meters per second
m is the mass of the sphere in kilograms
g is the acceleration due to gravity (9.8 m/s^2)
C_d is the drag coefficient (0.500 in this case)
A is the cross-sectional area of the sphere in meters^2
rho_f is the density of the fluid (1.20 kg/m^3 in this case)
The mass of the sphere can be calculated using the following formula:
m = (4/3) * pi * r^3 * rho
where:
m is the mass of the sphere in kilograms
pi is a mathematical constant (3.14)
r is the radius of the sphere in meters
rho is the density of the sphere in kilograms per cubic meter
The cross-sectional area of the sphere can be calculated using the following formula:
A = pi * r^2
Plugging in the known values, we get the following terminal velocity for the sphere:
v_t = sqrt((2 * (4/3) * pi * (8.00 cm)^3 * (1.14 g/cm^3) * 9.8 m/s^2) / (0.500 * pi * (8.00 cm)^2 * 1.20 kg/m^3)) = 17.71 m/s
The height from which the sphere would have to be dropped to reach this speed if it fell without air resistance can be calculated using the following formula:
h = (v_t^2 * 2 / g)
where:
h is the height in meters
v_t is the terminal velocity in meters per second
g is the acceleration due to gravity (9.8 m/s^2)
Plugging in the known values, we get the following height:
h = (17.71 m/s)^2 * 2 / 9.8 m/s^2 = 86.77 m
To learn more about terminal speed click here: brainly.com/question/30556510
#SPJ11
A separately excited wound field DC motor operates with an armature
supply voltage of 280 Volts. The field current supplied to the field windings is,
under normal operation, equal to = 1.0 A, and the resulting no-load speed
is 2100 rpm. The armature resistance is 1.0 , and the full-load developed
torque is 22 Nm.
(i) Determine the value of the product Kphi and the full-load
armature current under the conditions described
above.
(ii) Determine the full-load speed of the motor in rpm under
the conditions described above.
.
(iii) If the field current is reduced to 0.9 A, but the developed
torque remains unchanged, calculate the new full-load
speed of the motor in rpm. Hint: Assume that the field
flux is proportional to the field current .
(i) To determine the value of the product KΦ, we can use the formula below:
Full-load developed torque = (KΦ * armature current * field flux) / 2Φ
= (2 * Full-load developed torque) / (Armature current * field flux)
Given, Full-load developed torque = 22 Nm, Armature current = I, a = Full-load armature current = ?
Field flux = φ = (Φ * field current) / Number of poles
Field current = If = 1.0 A, Number of poles = P = ?
As the number of poles is not given, we cannot determine the field flux. Thus, we can only calculate KΦ when the number of poles is known. In order to find the full-load armature current, we can use the formula below:
Full-load developed torque = (KΦ * armature current * field flux) / 2Armature current
= (2 × Full-load developed torque) / (KΦ * field flux)
Given, Full-load developed torque = 22 Nm, Armature resistance = R, a = 1 Ω, Armature voltage = E, a = 280 V, Field current = If = 1.0 A, Number of poles = P = ?
Field flux = φ = (Φ * field current) / Number of poles
No-load speed = Nn = 2100 rpm, Full-load speed = Nl = ?
Back emf at no-load = Eb = Vt = Ea
Full-load armature current = ?
We know that, Vt = Eb + Ia RaVt = Eb + Ia Ra
=> 280 = Eb + Ia * 1.0
=> Eb = 280 - Ia
Full-load speed (Nl) can be determined using the formula below:
Full-load speed (Nl) = (Ea - Ia Ra) / KΦNl
=> (Ea - Ia Ra) / KΦ
Nl = (280 - Ia * 1.0) / KΦ
Substituting the value of KΦ from the above equation in the formula of full-load developed torque, we can determine the full-load armature current.
Full-load developed torque = (KΦ * armature current * field flux) / 2
=> armature current = (2 * Full-load developed torque) / (KΦ * field flux)
Substitute the given values in the above equation to calculate the value of full-load armature current.
(ii) Given, full-load developed torque = 22 Nm, Armature current = ?,
Field flux = φ = (Φ * field current) / Number of poles
Field current = If = 1.0 A, Number of poles = P = ?
No-load speed = Nn = 2100 rpm, Full-load speed = Nl = ?
We know that, Full-load speed (Nl) = (Ea - Ia Ra) / KΦNl
=> (280 - Ia * 1.0) / KΦ
We need to calculate the value of Kphi to determine the full-load speed.
(iii) Given, full-load developed torque = 22 Nm, Armature current = Ia = Full-load armature current
Field flux = φ = (Φ * field current) / Number of poles
Number of poles = P = ?
Armature resistance = Ra = 1.0 Ω, Armature voltage = Ea = 280 V, Field current = If = 0.9 A,
Full-load speed = Nl = ?
We know that, Full-load speed (Nl) = (Ea - Ia Ra) / KΦNl
=> (280 - Ia * 1.0) / KΦ
For this, we need to calculate the value of KΦ first. Since we know that the developed torque is unchanged, we can write:
T ∝ φ
If T ∝ φ, then T / φ = k
If k is constant, then k = T / φ
We can use the above formula to calculate k. After we calculate k, we can use the below formula to calculate the new field flux when the field current is reduced.
New field flux = (Φ * field current) / Number of poles = k / field current
Once we determine the new field flux, we can substitute it in the formula of full-load speed (Nl) = (Ea - Ia Ra) / KΦ to determine the new full-load speed.
Learn more about "Field Flux" refer to the link : https://brainly.com/question/10736183
#SPJ11
A ray of light travels through a medium n1 and strikes a surface of a second medium, n2. The light that is transmitted to the medium n2 is deflected. This forms an angle smaller than its original direction, approaching the normal. We can conclude that medium 2 is more dense than medium 1.
Select one:
True
False
The conclusion that medium 2 is dense than medium 1 based solely on the fact that the transmitted light is deflected towards the normal is incorrect. This statement is false.
The phenomenon being described is known as refraction, which occurs when light travels from one medium to another with a different refractive index. The refractive index is a measure of how fast light travels in a particular medium. When light passes from a medium with a lower refractive index (n1) to a medium with a higher refractive index (n2), it slows down and changes direction.
The angle at which the light is deflected depends on the refractive indices of the two media and is described by Snell's law. According to Snell's law, when light travels from a less dense medium (lower refractive index) to a more dense medium (higher refractive index), it bends toward the normal. However, the denseness or density of the media itself cannot be directly inferred from the deflection angle.
To determine which medium is more dense, we would need additional information, such as the masses or volumes of the two media. Density is a measure of mass per unit volume, not directly related to the phenomenon of light refraction.
To learn more about refraction
https://brainly.com/question/27932095
#SPJ11
A copper wire is 10.00 m long and has a cross-sectional area of 1.00×10 −4
m 2
. This wire forms a one turn loop in the shape of square and is then connocted to a buttery that apples a potential difference of 0.200 V. If the locp is placed in a uniform mognetic feld of magnitude 0.400 T, what is the maximum torque that can act on it?
The maximum torque that can act on the loop is approximately 47,058.8 N·m.
To calculate the maximum torque acting on the loop, we can use the formula:
Torque = N * B * A * I * sin(θ)
where N is the number of turns in the loop, B is the magnetic field strength, A is the area of the loop, I is the current flowing through the loop, and θ is the angle between the magnetic field and the normal vector of the loop.
In this case, the loop has one turn (N = 1), the magnetic field strength is 0.400 T, the area of the loop is (10.00 m)² = 100.00 m², and the potential difference applied by the battery is 0.200 V.
To find the current flowing through the loop, we can use Ohm's law:
I = V / R
where V is the potential difference and R is the resistance of the loop.
The resistance of the loop can be calculated using the formula:
R = ρ * (L / A)
where ρ is the resistivity of copper (approximately 1.7 x 10^-8 Ω·m), L is the length of the loop, and A is the cross-sectional area of the loop.
Substituting the given values:
R = (1.7 x 10^-8 Ω·m) * (10.00 m / 1.00 x 10^-4 m²)
R ≈ 1.7 x 10^-4 Ω
Now, we can calculate the current:
I = V / R
I = 0.200 V / (1.7 x 10^-4 Ω)
I ≈ 1176.47 A
Substituting all the values into the torque formula:
Torque = (1) * (0.400 T) * (100.00 m²) * (1176.47 A) * sin(90°)
Since the angle between the magnetic field and the normal vector of the loop is 90 degrees, sin(90°) = 1.
Torque ≈ 47,058.8 N·m
Therefore, The maximum torque that can act on the loop is approximately 47,058.8 N·m.
Learn more about torque here:
https://brainly.com/question/17512177
#SPJ11
A wire of length 10 meters carrying a current of .6 amps to the left lies along the x-axis from (-5,0) to (5,0) meters. a) Find the Magnetic field created by this wire at (0,8) meters. b) Find the Magnetic field created by this wire at (10,0) meters. c) Find the Magnetic field created by this wire at (10,8) meters.
The magnetic field created by the 10m wire carrying a current of 6A to the left lies along the x-axis from (-5,0) to (5,0) meters at:
a) point (0,8) m is approximately 3.75 × 10⁻⁹ T,
b) point (10,0) m is approximately 3 × 10⁻⁹ T and
c) point (10,8) m is approximately 2.68 × 10⁻⁹ T.
To find the magnetic field created by the wire at the given points, we can use the formula for the magnetic field produced by a straight current-carrying wire.
The formula is given by:
B = (μ₀ × I) / (2πr),
where
B is the magnetic field,
μ₀ is the permeability of free space (4π × 10⁻⁷ T·m/A),
I is the current, and
r is the distance from the wire.
a) At point (0,8) meters:The wire lies along the x-axis, and the point of interest is above the wire. The distance from the wire to the point is 8 meters. Substituting the values into the formula:
B = (4π × 10⁻⁷ T·m/A × 0.6 A) / (2π × 8 m),
B = (0.6 × 10⁻⁷ T·m) / (16 m),
B = 3.75 × 10⁻⁹ T.
Therefore, the magnetic field created by the wire at point (0,8) meters is approximately 3.75 × 10⁻⁹ T.
b) At point (10,0) meters:The wire lies along the x-axis, and the point of interest is to the right of the wire. The distance from the wire to the point is 10 meters. Substituting the values into the formula:
B = (4π × 10⁻⁷ T·m/A ×0.6 A) / (2π × 10 m),
B = (0.6 * 10⁻⁷ T·m) / (20 m),
B = 3 × 10⁻⁹ T.
Therefore, the magnetic field created by the wire at point (10,0) meters is approximately 3 × 10⁻⁹ T.
c) At point (10,8) meters:The wire lies along the x-axis, and the point of interest is above and to the right of the wire. The distance from the wire to the point is given by the diagonal distance of a right triangle with sides 8 meters and 10 meters. Using the Pythagorean theorem, we can find the distance:
r = √(8² + 10²) = √(64 + 100) = √164 = 4√41 meters.
Substituting the values into the formula:
B = (4π × 10⁻⁷ T·m/A × 0.6 A) / (2π × 4√41 m),
B = (0.6 × 10⁻⁷ T·m) / (8√41 m),
B ≈ 2.68 × 10⁻⁹ T.
Therefore, the magnetic field created by the wire at point (10,8) meters is approximately 2.68 × 10⁻⁹ Tesla.
Hence, the magnetic field created by the 10m wire carrying a current of 6A to the left lies along the x-axis from (-5,0) to (5,0) meters at a) point (0,8) meters is approximately 3.75 × 10⁻⁹ T, b) point (10,0) meters is approximately 3 × 10⁻⁹ T and c) point (10,8) meters is approximately 2.68 × 10⁻⁹ Tesla.
Learn more about Magnetic field from the given link:
https://brainly.com/question/30830460
#SPJ11
The driver of a truck slams on the brakes when he sees a tree blocking the road. The truck slows down uniformly with acceleration -5.80 m/s² for 4.20 s, making skid marks 65.0 m long that end at the tree. With what speed does the truck then strike the tree?
Speed is the measure of how quickly an object moves or the rate at which it covers a distance. The truck strikes the tree with a speed of 24.3 m/s.
To find the speed of the truck when it strikes the tree, we can use the equation of motion that relates acceleration, time, initial velocity, and displacement. In this case, the truck slows down uniformly with an acceleration of -5.80 m/s² for a time of 4.20 s, and the displacement is given as 65.0 m (the length of the skid marks). The initial velocity is unknown.
Using the equation of motion:
Displacement = Initial velocity * time + (1/2) * acceleration * [tex]time^{2}[/tex]
Substituting the known values:
65.0 m = Initial velocity * 4.20 s + (1/2) * (-5.80 m/s²) * (4.20 s)2
Simplifying and solving for the initial velocity:
Initial velocity = (65.0 m - (1/2) * (-5.80 m/s²) * (4.20 s)2) / 4.20 s
Calculating the initial velocity, we find that the truck's speed when it strikes the tree is approximately 24.3 m/s.
To learn more about speed click here:
brainly.com/question/27888149
#SPJ11
Two dogs pull horizontally on ropes attached to a post; the angle between the ropes is 36.2 degrees. Dog A exerts a force of 11.1 N , and dog B exerts a force of 5.7 N . Find the magnitude of the resultant force. Express your answer in newtons.
The magnitude of the resultant force in newtons that is exerted by the two dogs pulling horizontally on ropes attached to a post is 12.6 N.
How to find the magnitude of the resultant force?The sum of the two vectors gives the resultant vector. The formula to find the resultant force, R is R = √(A² + B² + 2AB cosθ).
Where, A and B are the magnitudes of the two forces, and θ is the angle between them.
The magnitude of the resultant force is 12.6 N. Let's derive this answer.
Given;
The force exerted by Dog A, A = 11.1 N
The force exerted by Dog B, B = 5.7 N
The angle between the two ropes, θ = 36.2°
Now we can use the formula to find the resultant force, R = √(A² + B² + 2AB cosθ).
Substituting the given values,
R = √(11.1² + 5.7² + 2(11.1)(5.7) cos36.2°)
R = √(123.21 + 32.49 + 2(11.1)(5.7) × 0.809)
R = √(155.7)R = 12.6 N
Therefore, the magnitude of the resultant force is 12.6 N.
Learn more about the resultant vector: https://brainly.com/question/28188107
#SPJ11
If the net charge on the oil drop is negative, what should be
the direction of the electric field that helps it remain
stationary?
Millikan's experiment established the fundamental charge of the electron to be 1.592 x 10-19 coulombs, which is now defined as the elementary charge.
The direction of the electric field that helps an oil drop remain stationary when the net charge on it is negative is upwards. This occurs due to the interaction between the electric field and the negative charges on the oil droplet.
Millikan oil-drop experiment, which is a measurement of the elementary electric charge by American physicist Robert A. Millikan in 1909, was the first direct and reliable measurement of the electric charge of a single electron.
The following are some points to keep in mind during the Millikan Oil Drop Experiment:
Oil droplets are produced using an atomizer by spraying oil droplets into a container.
When oil droplets reach the top, they are visible through a microscope.
A uniform electric field is generated between two parallel metal plates using a battery.
The positively charged upper plate attracts negative oil droplets while the negatively charged lower plate attracts positive oil droplets.
The oil droplet falls slowly due to air resistance through the electric field.
As a result of Coulomb's force, the oil droplet stops falling and remains stationary. The upward electric force balances the downward gravitational force. From this, the amount of electrical charge on the droplet can be calculated.
Millikan's experiment established the fundamental charge of the electron to be 1.592 x 10-19 coulombs, which is now defined as the elementary charge.
To know more about fundamental charge of the electron, visit:
https://brainly.com/question/32913598
#SPJ11
When an oil drop has a negative net charge, the electric field that helps it stay stationary is in the upward direction.
Thus, The interaction between the electric field and the oil droplet's negative charges causes this to happen.
The first direct and accurate measurement of the electric charge of a single electron was made in 1909 by American physicist Robert A. Millikan using his oil-drop experiment to detect the elementary electric charge.
When conducting the Millikan Oil Drop Experiment, bear the following in mind. Using an atomizer, oil droplets are sprayed into a container to create oil droplets. Oil droplets are visible under a microscope once they have risen to the top. Between two people, a consistent electric field is created.
Thus, When an oil drop has a negative net charge, the electric field that helps it stay stationary is in the upward direction.
Learn more about Electric field, refer to the link:
https://brainly.com/question/11482745
#SPJ4
An electron has a total energy of 2.38 times its rest energy. What is the momentum of this electron? (in) Question 5 A proton has a speed of 48 km. What is the wavelength of this proton (in units of pm)? 8
(a) The momentum of the electron is 2.16 times its rest momentum.(b) The wavelength of the proton is 8246 picometers.
(a) The momentum of an electron with a total energy of 2.38 times its rest energy:
E² = (pc)² + (mc²)²
Given that the total energy is 2.38 times the rest energy, we have:
E = 2.38mc²
(2.38mc²)² = (pc)² + (mc²)²
5.6644m²c⁴ = p²c² + m²⁴
4.6644m²c⁴ = p²c²
4.6644m²c² = p²
Taking the square root of both sides:
pc = √(4.6644m²c²)
p = √(4.6644m²c²) / c
p = √4.6644m²
p = 2.16m
The momentum of the electron is 2.16 times its rest momentum.
(b)
To calculate the wavelength of a proton with a speed of 48 km/s:
λ = h / p
The momentum of the proton can be calculated using the formula:
p = mv
p = (1.6726219 × 10⁻²⁷) × (48,000)
p = 8.0333752 × 10⁻²³ kg·m/s
The wavelength using the de Broglie wavelength formula:
λ = h / p
λ = (6.62607015 × 10⁻³⁴) / (8.0333752 × 10⁻²³ )
λ ≈ 8.2462 × 10⁻¹²
λ ≈ 8246 pm
The wavelength of the proton is 8246 picometers.
To know more about the wavelength:
https://brainly.com/question/32900586
#SPJ4
A silver wire has a length of 23.0 m and a resistance of 4.40 at 20.0C. Assuming a circular cross section, what is the wire diameter (in mm)? The reactivity of silver at 10.0 C is 1.59 x 10^-6 omega x m
The diameter of the wire is 0.47 mm.
The resistance of a wire is given by the following formula
R = ρl/A`
here:
* R is the resistance in ohms
* ρ is the resistivity in Ω⋅m
* l is the length in meters
* A is the cross-sectional area in meters^2
The cross-sectional area of a circular wire is given by the following formula:
A = πr^2
where:
* r is the radius in meter
Plugging in the known values, we get:
4.40 Ω = 1.59 × 10^-6 Ω⋅m * 23.0 m / πr^2
r^2 = (4.40 Ω * π) / (1.59 × 10^-6 Ω⋅m * 23.0 m)
r = 0.0089 m
d = 2 * r = 0.0178 m = 0.47 mm
The diameter of the wire is 0.47 mm.
Learn more about diameter with the given link,
https://brainly.com/question/28162977
#SPJ11
Q 12A: A rocket has an initial velocity vi and mass M= 2000 KG. The thrusters are fired, and the rocket undergoes constant acceleration for 18.1s resulting in a final velocity of Vf Part (a) What is the magnitude, in meters per squared second, of the acceleration? Part (b) Calculate the Kinetic energy before and after the thrusters are fired. ū; =(-25.7 m/s) î+(13.8 m/s) į Ū=(31.8 m/s) { +(30.4 m/s) Î.
Part (a) The magnitude of the acceleration of the rocket is 3.52 m/s².
Part (b) The kinetic energy before the thrusters are fired is 1.62 x 10⁶ J, and after the thrusters are fired, it is 3.56 x 10⁶ J.
To calculate the magnitude of the acceleration, we can use the formula of constant acceleration: Vf = vi + a*t, where Vf is the final velocity, vi is the initial velocity, a is the acceleration, and t is the time. Rearranging the formula to solve for acceleration, we have a = (Vf - vi) / t.
Substituting the given values, we get a = (31.8 m/s - (-25.7 m/s)) / 18.1 s = 57.5 m/s / 18.1 s ≈ 3.52 m/s².
To calculate the kinetic energy before the thrusters are fired, we use the formula: KE = (1/2) * M * (vi)². Substituting the given values, we get KE = (1/2) * 2000 kg * (-25.7 m/s)² ≈ 1.62 x 10⁶ J.
Similarly, the kinetic energy after the thrusters are fired is KE = (1/2) * 2000 kg * (31.8 m/s)² ≈ 3.56 x 10⁶ J.
learn more about kinetic energy here:
https://brainly.com/question/26472013
#SPJ11
3) Monochromatic light of wavelength =460 nm is incident on a pair of closely spaced slits 0.2 mm apart. The distance from the slits to a screen on which an interference pattern is observed is 1.2m.
I) Calculate the phase difference between a ray that arrives at the screen 0.8 cm from the central maximum and a ray that arrives at the central maximum.
II) Calculate the intensity of the light relative to the intensity of the central maximum at the point on the screen described in Problem 3).
III) Identify the order of the bright fringe nearest the point on the screen described in Problem 3).
The intensity of the light relative to the intensity of the central maximum at the point on the screen is 0.96.The bright fringe's order that is closest to the described spot on the screen is 1.73× 10^-6.
Given data:Wavelength of monochromatic light, λ = 460 nm
Distance between the slits, d = 0.2 mm
Distance from the slits to screen, L = 1.2 m
Distance from the central maximum, x = 0.8 cm
Part I: To calculate the phase difference between a ray that arrives at the screen 0.8 cm from the central maximum and a ray that arrives at the central maximum,
we will use the formula:Δφ = 2πdx/λL
where x is the distance of point from the central maximum
Δφ = 2 × π × d × x / λL
Δφ = 2 × π × 0.2 × 0.008 / 460 × 1.2
Δφ = 2.67 × 10^-4
Part II: We will apply the following formula to determine the light's intensity in relation to the centre maximum's intensity at the specified location on the screen:
I = I0 cos²(πd x/λL)
I = 1 cos²(π×0.2×0.008 / 460×1.2)
I = 0.96
Part III: The position of the first minimum on either side of the central maximum is given by the formula:
d sin θ = mλ
where m is the order of the minimum We can rearrange this formula to get an expression for m:
m = d sin θ / λ
Putting the given values in above formula:
θ = tan⁻¹(x/L)θ = tan⁻¹(0.008 / 1.2)
θ = 0.004 rad
Putting the values of given data in above formula:
m = 0.2 × sin(0.004) / 460 × 10⁻9m = 1.73 × 10^-6
The order of the bright fringe nearest to the point on the screen described is 1.73 × 10^-6.
learn more about intensity from given link
https://brainly.com/question/7068958
#SPJ11
Four resistors R 1 =78Ω,R 2 =35Ω,R 3 =60Ω and R 4 =42Ω are connected with a battery of voltage 6 V. How much is the total current in the circuit? Express your answer in amperes (A).
The total current in the circuit is 0.028 (A).
To find the total current in the circuit, we can use Ohm's Law and the concept of total resistance in a series circuit. In a series circuit, the total resistance (R_total) is the sum of the individual resistances.
Given resistors:
R1 = 78 Ω
R2 = 35 Ω
R3 = 60 Ω
R4 = 42 Ω
Total resistance (R_total) in the circuit:
R_total = R1 + R2 + R3 + R4
R_total = 78 Ω + 35 Ω + 60 Ω + 42 Ω
R_total = 215 Ω
We know that the total current (I_total) in the circuit is given by Ohm's Law:
I_total = V / R_total
where V is the voltage provided by the battery (6 V) and R_total is the total resistance.
Substituting the given values:
I_total = 6 V / 215 Ω
I_total ≈ 0.028 A
Therefore, the total current in the circuit is approximately 0.028 amperes (A).
To know more about ohm's law refer here: https://brainly.com/question/1247379#
#SPJ11