Answer:
T₂ = 573.86 K
Explanation:
Given data:
Initial volume = 1.32 L
Initial temperature = 30.0°C (30+273 = 303 K)
Final volume = 2.50 L
Final temperature in car = ?
Solution:
Solution:
The given problem will be solve through the Charles Law.
According to this law, The volume of given amount of a gas is directly proportional to its temperature at constant number of moles and pressure.
Mathematical expression:
V₁/T₁ = V₂/T₂
V₁ = Initial volume
T₁ = Initial temperature
V₂ = Final volume
T₂ = Final temperature
Now we will put the values in formula.
V₁/T₁ = V₂/T₂
T₂ = V₂T₁/V₁
T₂ = 2.50 L × 303 K / 1.32 L
T₂ = 757.5 L.K / 1.32 L
T₂ = 573.86 K
Which state of matter do mercury, orange juice and lava represent?
Answer:
they represent liquid state of matter.
Answer:
they state liquid state of matter .
hope it is helpful to you
I WILL GIVE BRANLIEST What factor is the temperature in an ecosystem? Abiotic or Biotic?
Answer:abiotic .
Explanation:
1.Which statement(s) is/are true about a divergent plate boundary? Check all that apply.
A.new crust is created here
B.an ocean trench is found here
C.a rift valley is associated with this boundary
D.subduction occurs at this boundary
E.a mid-ocean ridge is found at this boundary
F.San Andreas is an example of this type of boundary
G.sea floor spreading occurs here
--------------------------------------------------------------------------------------------------------------------------------
2.Which statement(s) is/are true about a transform plate boundary? Check all that apply.
A.an ocean trench is found here
B.earthquakes frequent this boundary
C.subduction occurs at this boundary
D.two plates are sliding past each other
E.San Andreas is an example of this type of boundary
F.an ocean trench is found here
--------------------------------------------------------------------------------------------------------------------------------
3.Which statement(s) is/are true about a convergent plate boundary? Check all that apply.
an ocean trench is found here
a rift valley is associated with this boundary
subduction occurs at this boundary
volcanic island chain might occur here
folded mountains might form here
earthquakes might occur here
San Andreas is an example of this type of boundary
--------------------------------------------------------------------------------------------------------------------------------
SINCE THIS IS ALOT OF THINKING I AM GIVING A GOOD AMOUT OF POINTS.....
PLEASE DONT SCAM AND STEAL THE POINTS
Answer:
I know the first one is c or e but i not sure what the others are, the second one is- wait are you sure your in 6th grade lol? I dont remember learning this
Answer:
OMG ITS MEHH
Explanation:
Benzoic acid, C6H5COOH, is another derivative of benzene. The pH of an aqueous solution of benzoic acid at 298 K is 2.95. Determine the concentration of hydroxide ions in the solution,
Answer:
[OH⁻] = 8.91x10⁻¹²M
Explanation:
In aqueous solutions, the [OH] and [H⁺] are associated in the equation of hydrolisis of water:
1x10⁻¹⁴ = [OH⁻] [H⁺]
With pH, we can solve for [H⁺] and obtain, the [OH⁻] using this equation:
pH = -log [H⁺]
[H⁺]= 10^-pH
[H⁺] = 1.122x10⁻³M
1x10⁻¹⁴ = [OH⁻] [1.122x10⁻³M]
[OH⁻] = 8.91x10⁻¹²MI WILLL GIVE YOU BRAINLYESTTT PLEASE HELPPPP
Answer:
10.99s
Explanation:
Given parameters:
Speed of the fly = 9.1m/s
Distance flown = 100m
Unknown:
Time taken to fly this distance = ?
Solution:
Speed is distance divided by the time;
Mathematically;
Speed = [tex]\frac{distance}{time}[/tex]
Time = [tex]\frac{distance}{speed }[/tex]
Insert the parameters and solve;
Time = [tex]\frac{100}{9.1}[/tex] = 10.99s
how can you test a sample of soil for acidity or alkalinity
Answer:
Scoop a soil sample into a fresh container, add 1/2 cup of water, and mix. Then, add 1/2 cup of baking soda. If the soil bubbles or fizzes, the soil is acidic. The reaction you're seeing is the result of acidic soil coming into contact with an alkaline substance (baking soda).
Explanation:
Hope this helped!
Geologic Time Scale
Time Period Duration (Millions of Years Ago)
Cenozoic 66-0
Mesozoic 252-66
Paleozoic 541-252
According to the scale, what time period are we in today?
a
Cenozoic
b
Mesozoic
c
Paleozoic
d
None of these
please help me..........
Answer:
4/6
6/9
8/12
Explanation:
What is Jadi? is it goat? what language is Jadi?
What is the volume of a 25 g object with a density of 9.1 g/mL? please help me
Answer:
The answer is 2.75 mLExplanation:
The volume of a substance when given the density and mass can be found by using the formula
[tex]volume = \frac{mass}{density} \\ [/tex]
From the question we have
[tex]volume = \frac{25}{9.1} \\ = 2.747252...[/tex]
We have the final answer as
2.75 mLHope this helps you
According to the periodic table, the neutral atom of what element has 4
protons, 5 neutrons, and 4 electrons?
Answer:
Beryllium
Explanation:
Given parameters:
Number of protons = 4
Number of neutrons = 5
Number of electrons = 4
Unknown:
Element = ?
Solution:
To determine an element, the atomic number is the most important identifier.
The atomic number is the number of protons in an atom.
Since the atom here has a proton number of 4, checking on the periodic table, it is Beryllium, Be
what is the density of a 100g piece of titanium if a 10g piece of titanium has a density of 4.506g/cm3?
Possible answers:
A: 45.06g/cm3
B:4.506g/cm3
C: 9.1g/cm3
D: 91g/cm3
Answer:
B. Density stays the same no matter how much of a substance there is.
Explanation:
Density of the substance is the same and it is the measure of its mass per unit volume. Thus, the mass of titanium per 1 cm³ is 4.506 g which is the same for 10 g, 100 g or whatever the mass.
What is density ?Density of a substance is the measure of its mass per unit volume. It describes how closely its particles are packed. Density of an object depends on its bond type, temperature and pressure.
The more denser the object is , more will be its mass distribution per unit volume. Substances denser than water will sink on it otherwise they float on water.
Density is constant for a substance, the distribution of given mass per unit volume is same for all masses. Hence, the density of 100 g Ti is same as that of 10 g. i.e., 4.56 g/cm³.
To find more on density, refer here:
https://brainly.com/question/15164682
#SPJ2
Under a certain set of conditions, the percent yield of a reaction that produces carbon dioxide is 75.0%. What mass in grams of CO2 will actually be recovered if the theoretical yield is 26.7 grams?
Answer:
Actual yield = 20.03g
Explanation:
[tex]% yield = 100.\frac{actual yield}{theoretical yield}[/tex]% [tex]yield[/tex] = [tex]100. \frac{actual \ yield}{theoretical \ yield}[/tex]
Actual yield = % yield.(theoretical yield) / 100
Actual yield = 75.26.7/100
Actual yield = 20.025
Answer: I got 20.025 and then I rounded it to 20.0
Explanation:
Question 14
1 pts
How many moles of NaCl could be found in 0.4 L of a 0.9 M solution? Round your answer to
two decimal places.
Answer:
0.36mol
Explanation:
Given parameters:
Volume of NaCl = 0.4L
Molarity = 0.9M
Unknown:
Number of moles = ?
Solution:
To find the number of moles, the molarity of a solution is the amount of solute contained in a solution.
Molarity = [tex]\frac{number of moles}{volume}[/tex]
Number of moles = molarity x volume
Insert the parameters and solve;
Number of moles = 0.4 x 0.9 = 0.36mol
What causes rain to precipitate from clouds?
Answer: Precipitation forms in the clouds when water vapor condenses into bigger and bigger droplets of water. When the drops are heavy enough, they fall to the Earth.
Explanation: Have a blessed day!
Answer: Precipitation forms in the clouds when water vapor condenses into bigger and bigger droplets of water. When the drops are heavy enough, they fall to the Earth.
Explanation:hope this helps u
12.
Contrast and compare:
a) ionic and covalent bonding
Answer:
Ionic bonds - an intramolecular force exist in a nonmetal and metal compounds such as NaCl. The Na donate 1 electon to Cl to complete its octet rule.
Covalent bond - an intramolecular force exist in a nonmetal and nonmetal compounds such as bonds O2, Cl2, CO2, sugar, proteins and most of organic compounds and biomolecules by sharing electrons to bond.
There are two types of covalent bonds: polar and nonpolar. Polar bond is a bond between two different nonmetal atoms of different electronegativities. While nonpolar bond is a bond between the same atom or two differenct atoms of the same electronegativities (if there is). Their electronegativities pull will cancel so that their overall polarity is zero.
How many orbitals surround the nucleus in a neutral atom of sulfur (S)?
1
3
5
6
The table gives the solubility of each substance in 100
g water at 20°C. Use the drop-down menus to rate the solubility of each substance from greatest (1) to least
(4).
Calcium chloride
Calcium bromide
Calcium carbonate
Calcium bicarbonate
Answer:
2 1 4 3
Explanation:
Polar solute dissolve in polar solvent and non polar solute dissolve in non polar solvent. Therefore the order of solubility is calcium bromide> calcium chloride>calcium bicarbonate>calcium carbonate.
What is solubility?Solubility shows the extent of solubility of a solute in solvent to make a solution. Solute is substances that is present in small amount. solvent is a substance that is present in large amount. Its SI unit is gram per liter or g/L.
Bond strength affect the solubility of a solute in solvent. weaker the bond strength is, more the solubility is. The weaker bond can be easily broken by water molecule
Calcium bromide is more soluble than calcium chloride as the bond strength in calcium bromide is weaker than calcium chloride. Calcium bicarbonate is more soluble than calcium carbonate.
Therefore the order of solubility is calcium bromide> calcium chloride>calcium bicarbonate>calcium carbonate.
To know more about solubility, here:
https://brainly.com/question/16191271
#SPJ2
In your own words, please explain how to name acids.
Answer:
Acids are named based on their anion — the ion attached to the hydrogen. In simple binary acids, one ion is attached to hydrogen. Names for such acids consist of the prefix “hydro-“, the first syllable of the anion, and the suffix “-ic”. Complex acid compounds have oxygen in them.
Potato strips placed in a container of concentrated salt water will ultimately __.
Answer:
00000
Explanation:
what does the atomic mass number of each atom represent.
The atomic mass number tells us the number of neutrons and protons in the nucleus of an atom.
Why are flowers brightly colored?
Answer: In order to help the plants reproduce, flowers that are bright in color are meant to attract birds, bees and other insects. In the genetics of a flower, bright or dull colors are set in
Explanation:
List and define the 3 parts of a chemical equation (R->P).
Answer:
R- reactants
arrow- yields
p- products
Explanation:
The sum of the protons and neutrons in an atom equals the?
nucleus number
atomic number
atomic mass
mass number
Answer:
mass number
Explanation:
The sum of the protons and neutrons in an atom equals the mass number of such an atom.
Mass number is the mass of an atom. The mass of an atom is concentrated in the nucleusThe particles in the nucleus are the protons and neutrons.So;
Mass number = number of protons + number of neutrons.
PLEASE HELP!!!!!!!!
Step 4: Create Lewis dot diagrams.
a) Draw Lewis dot diagrams of the reactants and products on the paper with your chemical equation.
b) Select a different color to use for each element in the chemical reaction. Use your chosen color
for the element’s symbol and for its valence electrons.
c) Label these diagrams “Lewis Dot Diagrams.”
Answer:
Hey student your question is not proper arrange, i don't understand what you want us to do
why burning of wood and cutting it into small pieces are considered as two different types
of changes.in sort type
.
اور بس انتي شلال
Answer:
burning causes pollution cutting results furniture
Explanation:
are u a nepali ?
Answer:
burning of wood, new substances are formed and hence it is a chemical change. While cutting the wood into small pieces no new substance is formed, thus it is a physical change. Hence, burning of wood and cutting it into small pieces are considered as two different types of changes.
When you climb to the top of a water slide, you are gaining:
O A. gravitational kinetic energy.
B. chemical potential energy.
c. gravitational potential energy.
D. chemical kinetic energy.
Answer:
C
Explanation:
You climbing the water slide gives you potential energy and your building gravitational eneergy.
When we climb the top of a water slide we are gaining gravitational kinetic energy. That is we are moving through the surface and thus we experience both kinetic energy and gravitational energy.
What is kinetic energy?Kinetic energy of a body is generated by virtue of its motion. Gravitational energy is a form of energy by which the an object attracts other object to its center of mass. Both forms of energy are directly proportional to the mass of the object.
Potential energy is generated by virtue of the position and height of the object. As the height from surface increases, potential energy increases. Potential energy and kinetic energy together called as mechanical energy of an object.
When starts moving our potential energy is converting to kinetic energy. Hence, when we climb the top of a water slide kinetic energy starts to increase. Thus, option A is correct.
To find more on kinetic energy, refer here:
https://brainly.com/question/26472013
#SPJ2
Can the process of rusting be called combustion?
Answer:
no the answer is oxidation
SOMEONE HELP ME PLEASE ILL GIVE BRAINLY!
Is the following picture an example of a chemical change or a physical change?
A chemical change, because the atoms are rearranging to form new molecules.
A physical change, because the molecules are staying the same.
A chemical change, because the molecules are staying the same.
A physical change, because the atoms are rearranging to form new molecules.
Answer:
It would be a physical change, because the atoms are rerranging to form new molecules!
Explanation:
A wave is a _____that transfers _____ through a ______
A.) medium, disturbance, energy
B.) disturbance, energy, medium
C.) energy, disturbance, medium
D.)disturbance, medium, energy
A wave is a disturbance that transfers energy through a medium. There
are types of such as sound and light waves.
A wave involves the transfer of energy such as sound, light waves etc
through a medium. The medium could be through liquids , solids or air and
they have characteristic waves which pass through them.
When a wave transfers energy through a medium, the matter involved
doesn't experience any type of movement.
Read more on https://brainly.com/question/19210453
how do i do the chemicals
you have to put them togeter