Answer:
A. Michael suggests timing each addition of sugar
Explanation:
The experiment is about amount of sugar dissolved at different temperatures. The suggestion of Michael is best suited to record the timing of each addition of sugar. This will enable to record the timing of sugar added in the water and amount of sugar dissolved at the specified temperature.
At what angle(s) should investigators photograph a tool mark? A. parallel B. perpendicular C. 45 degrees D. varying
Answer:
B
Explanation:
what is the mass of 1.5 mol of aluminum?
Answer:
40.47 g Al
Explanation:
In 1 mol of Al, there are 26.98 grams of Al, so Al is 26.98 g/mol.
Simply multiply 1.5 by 26.98 to get your answer.
name the bleaching agent for cloth
Hydrogen peroxide is one of the most common bleaching agents. It is the primary bleaching agent in the textile industry, and is also used in pulp, paper, and home laundry applications.
bleaching agent is a material that lightens or whitens a substrate through chemical reaction. The bleaching reactions usually involve oxidative or reductive processes that degrade color systems. These processes may involve the destruction or modification of chromophoric groups in the substrate as well as the degradation of color bodies into smaller, more soluble units that are more easily removed in the bleaching process. The most common bleaching agents generally fall into two categories: chlorine and its related compounds (such as sodium hypochlorite) and the peroxygen bleaching agents, such as hydrogen peroxide and sodium perborate. Reducing bleaches represent another category. Enzymes are a new category of bleaching agents. They are used for textile, paper, and pulp bleaching as well as for home laundering. Chlorine‐containing bleaching agents are the most cost‐effective bleaching agents known. They are also effective disinfectants, and water disinfection is often the largest use of many chlorine‐containing bleaching agents. They may be divided into four classes: chlorine, hypochlorites, N‐chloro compounds, and chlorine dioxide. Except to bleach wood pulp and flour, chlorine itself is rarely used as a bleaching agent. The principal form of hypochlorite produced is sodium hypochlorite. Other hypochlorites include calcium hypochlorite and bleach liquor, bleaching powder and tropical bleach. The principal solid chlorine bleaching agents are the chlorinated isocyanurates, eg, sodium dichloroisocyanurate dihydrate. Other N‐chloro compounds include halogenated hydantoins, and sodium N‐chlorobenzenesulfonamide (chloramine B). Chlorine dioxide is a gas that is more hazardous than chlorine. Large amounts for pulp bleaching are made by several processes in which sodium chlorate is reduced with chloride, methanol, or sulfur dioxide in highly acidic solutions by complex reactions. Hydrogen peroxide is one of the most common bleaching agents. It is the primary bleaching agent in the textile industry, and is also used in pulp, paper, and home laundry applications. Hydrogen peroxide reacts with many compounds, such as borates, carbonates, pyrophosphates, sulfates, etc, to give peroxy compounds or peroxyhydrates. Peracids have superior cold water bleaching capability versus hydrogen peroxide because of the greater electrophilicity of the peracid peroxygen moiety. Lower wash temperatures and phosphate reductions or bans in detergent systems account for the recent utilization and vast literature of peracids in textile bleaching. The reducing agents generally used in bleaching include sulfur dioxide, sulfurous acid, bisulfites, sulfites, hydrosulfite (dithionites), sodium sulfoxylate formaldehyde, and sodium borohydride. These materials are used mainly in pulp and textile bleaching.
Next, break down the equation shown into the skeletal half-reactions for oxidation and reduction. Which of
these pairs shows the two skeletal half-reactions with their correct assignments?
reduction half reaction: HNO, NO
oxidation half reaction SH,SO,
oxidation half reaction: HNO3 -> NO
reduction half reaction: SH2SO,
reduction half reaction: HNO3 -H,SO,
oxidation half reaction S -> H2SO4
Answer:
Its answer A
Explanation:
I just took the test
Answer:
A:
reduction half reaction: HNO3-> NO
oxidation half reaction S->H2SO4
Explanation:
what is meant by amoeba and what is the name of its parts
Answer:
amoeba is the unicellular organism which can be seen by only microscope but not with our nacked eyes
Answer:
An amoeba often called an amoeboid, is a type of cell or unicellular organism which has the ability to alter its shape, primarily by extending and retracting pseudopods Amoebae do not form a single taxonomic group; instead, they are found in every major lineage of eukaryotic organisms. Amoeboid cells occur not only among the protozoa, but also in fungi, algae, and animals.
name of parts of ameoba
3 parts – the cytoplasm, plasma membrane and the nucleus. The cytoplasm can be differentiated into 2 layers – the outer ectoplasm and the inner endoplasm. The plasma membrane is a very thin, double-layered membrane composed of protein and lipid molecule
i hope this will help you
Consider an electrochemical cell based on the spontaneous reaction 2AgCl(s) + Zn(s) → 2Ag(s) + 2Cl– + Zn2+. If the zinc ion concentration is kept constant at 1 M, and the chlorine ion concentration is decreased from 1 M to 0.001 M, the cell voltage should:
Answer:
there is an increase by 0.18 V in the cell voltage.
Explanation:
The given equation of the reaction can be well written as
[tex]2AgCl_{(s)} + Zn _{(s)} \to 2Ag_{(s)} + 2 Cl^- _{(aq)}+ Zn^{2+}_{(aq)}[/tex]
By application of Nernst Equation ; we have the expression
[tex]E_{cell} = E^0- \dfrac{0,059}{n}log (\dfrac{[product]}{[reactant]})[/tex]
here in the above equation;
n = number of electrons transferred in the equation of the reaction
n = 2
Also;
[tex]E^0 = E_{cathode} - E_{anode}[/tex]
[tex]E^0 = E_{Ag^+/Ag} - E_{Zn^+/Zn}[/tex]
[tex]E^0 = +(0.80 \ V) - (-0..76 \ V)[/tex]
[tex]E^0 = (0.80 \ V +0..76 \ V)[/tex]
[tex]E^0 = 1.56 \ V[/tex]
If the zinc ion concentration is kept constant at 1 M; we have:
[tex]E_{cell} = E^0- \dfrac{0.059}{n}log (\dfrac{[product]}{[reactant]})[/tex]
[tex]E_{cell} = 1.56 - \dfrac{0.059}{2}log ({[Zn^{2+} ]}{[Cl^{2-}]})[/tex]
[tex]E_{cell} = 1.56 - \dfrac{0.059}{2}log (1)[/tex]
Since log(1) = 0
Therefore;
[tex]E_{cell} = 1.56\ V[/tex]
When the chlorine ion concentration is decreased from 1 M to 0.001 M; we have;
[tex]E_{cell} = E^0- \dfrac{0.059}{n}log (\dfrac{[product]}{[reactant]})[/tex]
[tex]E_{cell} = 1.56 - \dfrac{0.059}{2}log ({[Zn^{2+} ]}{[Cl^{2-}]})[/tex]
[tex]E_{cell} = 1.56 - \dfrac{0.059}{2}log ({[1*0.001^2}]})[/tex]
[tex]E_{cell} = 1.56 - 0.0295 \ * \ log ({[1*10^{-6}}]})[/tex]
[tex]E_{cell} = + 1.737 \ V[/tex]
The change in voltage = [tex]E_{cell} - E^0[/tex]
=( 1.737 - 1.56 )V
= 0.177 V
≅ 0.18 V
Thus; from the following observation; there is an increase by 0.18 V in the cell voltage.
The voltage of the cell increased by 0.18 V.
The equation of the reaction is; 2AgCl(s) + Zn(s) → 2Ag(s) + 2Cl– + Zn2+
We know that;
E°cell = 1.36 - (-0.76) = 2.12 V
If the cells are both at 1M concentration the Ecell = E°cell = 2.12 V
When the concentration of Cl- decreased from 1 M to 0.001 M
Ecell = E°cell - 0.0592/n log Q
Substituting values;
Ecell = 2.12 V - 0.0592/2 log (1 × (0.001)^2)
Ecell = 2.298 V
Increase in voltage = 2.298 V - 2.12 V = 0.18 V
Learn more: https://brainly.com/question/165414
Calculate the payback time if she insulates the loft with 300 mm insulation when: area of loft space = 100m^2 cost of roll of 100 mm thick loft insulation that covers 8.3m^2 = £20 cost of putting the insulation into the loft = £120 savings per year = £80 per 100 mm Payback Time = installation cost divided by annual savings
Answer: Payback time = 0.0075
Explanation: Since payback time is calculated as:
payback time = [tex]\frac{installation cost}{annual savings}[/tex]
First determine the installation cost:
100 mm thick insulation covers 8.3 m². Then 300 mm covers 24.9 m².
To cover 8.3m² costs £20. Then, the cost to cover 24.9 m² is:
cost = [tex]\frac{20*24.9}{8.3}[/tex]
cost = £60
The cost of putting the insulation is £120, so the total cost is:
total cost = £60 + £120
total cost = £180
Savings per year per 100 mm thick is £80. For 300 mm, the value of annual savings is:
savings = [tex]\frac{300*80}{100}[/tex]
savings = 240
payback time = [tex]\frac{installation cost}{annual savings}[/tex]
payback time = [tex]\frac{180}{240}[/tex]
payback time = 0.75
a heating fan is supplied with 150 j of electricity which is nonverts to 113 j of thermal energy and 37 j of sound energy
How efficient is the heating fan?
Answer:
Heating Fan is 75.33% efficient.
Explanation:
As it is mentioned that the given fan is a HEATING FAN, it means the it is used for provided heat (thermal energy) to the surrounding. Hence, its efficiency depends upon how much heat/thermal energy is provides.
We can state that.
Total Energy provided = 150 J
Useful Energy = 113 J
Wasted Energy = 37 J
The efficiency of the heating fan can be given by following formula:
Efficiency = ( Useful Energy / Total Energy ) × 100
Efficiency = ( 113 J / 150 J) × 100
Efficiency = (0.7533)× 100
Efficiency = 75.33%
How does the government control scientific research
Answer:
The government allocates a budget for research every year. The spending of that money is determined by government priorities. Some of the money is spent directly, in government-funded research centers.
Other money is distributed to other research institutions.
Money spent by other institutions for research has no government oversight.
Explanation:
what is Lfusion in the equation Q=mLfusion
Answer:
[tex]L_{\text{fusion}[/tex] is latent heat of fusion.
Explanation:
Latent heat is basically termed as hidden heat. It is defined as the amount of heat required to change 1 g of a substance at the temperature of its melting point from the solid to the liquid state at constant temperature.The formula that relates heat and latent heat of fusion is given by :[tex]Q=mL_{\text{fusion}}[/tex]
Here,
m is mass of substance
[tex]L_{\text{fusion}[/tex] is latent heat of fusion.
Primary succession is most likely caused by?
Answer:
volcanic eruption.
mark my answer as brainlest......
5.What is the chemibal formula for lead (II) iodide
Answer: The chemical formula for lead (II) iodide is [tex]PbI_2[/tex]
Explanation:
Lead (II) iodide is a ionic compound because it are formed by transference of electrons between metals and non metals.The bond formed between a metal and a non-metal is always ionic in nature.
For formation of a neutral ionic compound, the charges on cation and anion must be balanced. The cation is formed by loss of electrons by metals and anions are formed by gain of electrons by non metals.
The nomenclature of ionic compounds is given by:
1. Positive is written first followed by the oxidation state of metal in roman numerals in square brackets.
2. The negative ion is written next and a suffix is added at the end of the negative ion. The suffix written is '-ide'.
The chemical formula for lead (II) iodide is [tex]PbI_2[/tex]
Which sequence represents the relationship between pressure and volume of an ideal gas as explained by the kinetic-molecular theory? more gas particles Right arrow. More collisions Right arrow. Higher pressure smaller volume Right arrow. Crowded particles Right arrow. Less collisions Right arrow. Lower pressure smaller volume Right arrow. Crowded particles Right arrow. More collisions Right arrow. Higher pressure more gas particles Right arrow. More kinetic energy Right arrow. More volume Right arrow. Higher pressure
Answer:
smaller volume ⇒ Crowded particles ⇒ More collisions ⇒ Higher pressure
Explanation:
Smaller the volume , more crowed the particles . Then the particles will have rapid collisions so the free mean path is decreased , hence the pressure will be increased as follows
[tex]P=\frac{K_bT}{\sqrt{2}\pi d^2\lambda }[/tex]
where λ is mean free path , P is pressure .
The sequence the represent the relationship between pressure and volume of an ideal gas is: smaller volume right arrow Crowded particles right arrow More collisions right arrow Higher pressure
The kinetic molecular theory made five postulates which are used to explain the behaviour of gases.
From the postulates, he uses the kinetic molecular theory to explain Boyle's Law because the majority of a gas's volume in space is usually empty and may be compressed.
So, when a gas is compressed without affecting its temperature, the average kinetic energy of the gas particles remains constant. The particles continue to flow at the same rate, but the container has reduced.
As a result, the particles go from one end of the container to another in less time. This suggests they're hitting the barriers (collision) more frequently. Each and every increase in the frequency of collisions with the walls, thus, results in an increase in the gas's pressure.
Hence, as the volume of a gas decreases, the pressure of the gas increases.
Learn more about the Kinetic molecular theory here:
https://brainly.com/question/2901837
Which refers to the density of the medium’s particles at the compression of a sound wave? A.amplitude B.pitch C.volume D.wavelength
Answer:
A is the answer.
Explanation:
The sound wave is a longitudinal wave which travels in the form of compression and rarefaction . The point where the particles are closer to each other is called compression and the point where the particles are far apart from each other is called rarefaction.
Answer:
Amplitude
Explanation:
Amplitude describes the displacement of the medium's particles. The higher the amplitude, the more dense it is, and the lower the amplitude, the less dense it is.
Pitch is incorrect because it describes the sound
Volume is incorrect because it describes the sound.
Wavelength is incorrect because it describes the distance between a period of a wave.
Which consists of only one type of atom?
Answer:
A chemical element
Explanation:
A chemical element consists of only one type of atom.