A gold vault has 3 locks with a key for each lock. Key A is owned by the

manager whilst Key B and C are in the custody of the senior bank teller

and the trainee bank teller respectively. In order to open the vault door at

least two people must insert their keys into the assigned locks at the same

time. The trainee bank teller can only open the vault when the bank

manager is present in the opening.

i) Determine the truth table for such a digital locking system (4 marks)

ii) Derive and minimize the SOP expression for the digital locking system
​

Answer:

the net work per cycle [tex]\mathbf{W_{net} = 0.777593696}[/tex]  Btu per cycle

the power developed by the engine, W = 88.0144746 hp

Explanation:

the information given includes;

diameter of the four-cylinder bore = 3.7 in

length of the stroke = 3.4 in

The clearance volume = 16% = 0.16

The cylindrical volume [tex]V_2 = 0.16 V_1[/tex]

the crankshaft N rotates at a speed of  2400 RPM.

At the beginning of the compression , temperature [tex]T_1[/tex] = 60 F = 519.67 R    

and;

Otto cycle with a pressure =  14.5 lbf/in² = (14.5 × 144 ) lb/ft²

= 2088 lb/ft²

The maximum temperature in the cycle is 5200 R

From the given information; the change in volume is:

[tex]V_1-V_2 = \dfrac{\pi}{4}D^2L[/tex]

[tex]V_1-0.16V_1= \dfrac{\pi}{4}(3.7)^2(3.4)[/tex]

[tex]V_1-0.16V_1= 36.55714291[/tex]

[tex]0.84 V_1 =36.55714291[/tex]

[tex]V_1 =\dfrac{36.55714291}{0.84 }[/tex]

[tex]V_1 =43.52040823 \ in^3 \\ \\ V_1 = 43.52 \ in^3[/tex]

[tex]V_1 = 0.02518 \ ft^3[/tex]

the mass in air ( lb) can be determined by using the formula:

[tex]m = \dfrac{P_1V_1}{RT}[/tex]

where;

R = 53.3533 ft.lbf/lb.R°

[tex]m = \dfrac{2088 \ lb/ft^2 \times 0.02518 \ ft^3}{53.3533 \ ft .lbf/lb.^0R \times 519 .67 ^0 R}[/tex]

m = 0.0018962 lb

From the tables  of ideal gas properties at Temperature 519.67 R

[tex]v_{r1} =158.58[/tex]

[tex]u_1 = 88.62 Btu/lb[/tex]

At state of volume 2; the relative volume can be determined as:

[tex]v_{r2} = v_{r1} \times \dfrac{V_2}{V_1}[/tex]

[tex]v_{r2} = 158.58 \times 0.16[/tex]

[tex]v_{r2} = 25.3728[/tex]

The specific energy [tex]u_2[/tex] at [tex]v_{r2} = 25.3728[/tex] is 184.7 Btu/lb

From the tables of ideal gas properties at maximum Temperature T = 5200 R

[tex]v_{r3} = 0.1828[/tex]

[tex]u_3 = 1098 \ Btu/lb[/tex]

To determine the relative volume at state 4; we have:

[tex]v_{r4} = v_{r3} \times \dfrac{V_1}{V_2}[/tex]

[tex]v_{r4} =0.1828 \times \dfrac{1}{0.16}[/tex]

[tex]v_{r4} =1.1425[/tex]

The specific energy [tex]u_4[/tex] at [tex]v_{r4} =1.1425[/tex] is 591.84 Btu/lb

Now; the net work per cycle can now be calculated as by using the following formula:

[tex]W_{net} = Heat \ supplied - Heat \ rejected[/tex]

[tex]W_{net} = m(u_3-u_2)-m(u_4 - u_1)[/tex]

[tex]W_{net} = m(u_3-u_2- u_4 + u_1)[/tex]

[tex]W_{net} = m(1098-184.7- 591.84 + 88.62)[/tex]

[tex]W_{net} = 0.0018962 \times (1098-184.7- 591.84 + 88.62)[/tex]

[tex]W_{net} = 0.0018962 \times (410.08)[/tex]

[tex]\mathbf{W_{net} = 0.777593696}[/tex]  Btu per cycle

the power developed by the engine, in horsepower. can be calculated as follows;

In the  four-cylinder, four-stroke internal combustion engine; the power developed by the engine can be calculated by using the expression:

[tex]W = 4 \times N' \times W_{net[/tex]

where ;

[tex]N' = \dfrac{2400}{2}[/tex]

N' = 1200 cycles/min

N' = 1200 cycles/60 seconds

N' = 20 cycles/sec

W = 4 × 20 cycles/sec ×  0.777593696

W = 62.20749568 Btu/s

W = 88.0144746 hp

The net work per cycle and the power developed by this combustion engine are 0.7792 Btu and 88.20 hp.

Given the following data:

Note: The cylindrical volume is equal to [tex]0.16V_1[/tex]

First of all, we would determine the volume, mass and specific energy as follows:

[tex]V_1-V_2=\frac{\pi D^2L}{4} \\\\V_1-0.16V_1=\frac{3.142 \times 3.7^2 \times 3.4}{4}\\\\0.84V_1=36.56\\\\V_1=\frac{36.56}{0.84} \\\\V_1=43.52\;in^3 \;to \;ft^3 = 0.0252\;ft^3[/tex]

For the mass:

[tex]M=\frac{PV}{RT} \\\\M=\frac{2088 \times 0.0252}{53.3533 \times 519.67} \\\\M=\frac{52.6176}{27726.109411}[/tex]

M = 0.0019 lb.

At a temperature of 519.67 R, the relative volume and specific energy are:

[tex]v_{r1}=158.58\\\\u_1 = 88.62\;Btu/lb[/tex]

For the relative volume at the second state, we have:

[tex]v_{r2}=v_{r1}\times \frac{V_2}{V_1} \\\\v_{r2}=158.58\times 0.16\\\\v_{r2}=25.3728[/tex]

Note: At 25.3728, specific energy ([tex]u_2[/tex]) is 184.7 Btu/lb.

At a maximum temperature of 519.67 R, the relative volume and specific energy are:

[tex]v_{r3}=0.1828\\\\u_3 = 1098\;Btu/lb[/tex]

For the relative volume at state 4, we have:

[tex]v_{r4}=v_{r3}\times \frac{V_1}{V_3} \\\\v_{r4}=0.1828\times \frac{1}{0.16}\\\\v_{r4}=1.1425[/tex]

Note: At 1.1425, specific energy ([tex]u_4[/tex]) is 591.84 Btu/lb.

Now, we can calculate the net work per cycle by using this following formula:

[tex]W=Heat\;supplied -Heat\rejected\\\\W=m(u_3-u_2)-m(u_4-u_1)\\\\W=0.0019(1098-184.7)-0.0019(591.84-88.62)\\\\W=1.73527-0.956118[/tex]

W = 0.7792 Btu.

In a four-cylinder, four-stroke internal combustion engine, power is given by this formula:

[tex]W=4N'W_{net}[/tex]

But;

[tex]N'=\frac{N}{2 \times 60} \\\\N'=\frac{2400}{120} \\\\N'=20\;cycle/sec[/tex]

Substituting the given parameters into the formula, we have;

[tex]W=4 \times 20 \times 0.7792[/tex]

W = 62.336 Btu/sec.

In horsepower:

W = 88.20 hp.

Read more on net work here: https://brainly.com/question/10119215

Answer:

A) W' = 178.568 KW

B) ΔS = 2.6367 KW/k

C) η = 0.3

Explanation:

We are given;

Temperature at state 1;T1 = 360 °C

Temperature at state 2;T2 = 160 °C

Pressure at state 1;P1 = 10 bar

Pressure at State 2;P2 = 1 bar

Volumetric flow rate;V' = 0.8 m³/s

A) From table A-6 attached and by interpolation at temperature of 360°C and Pressure of 10 bar, we have;

Specific volume;v1 = 0.287322 m³/kg

Mass flow rate of water vapour at turbine is defined by the formula;

m' = V'/v1

So; m' = 0.8/0.287322

m' = 2.784 kg/s

Now, From table A-6 attached and by interpolation at state 1 with temperature of 360°C and Pressure of 10 bar, we have;

Specific enthalpy;h1 = 3179.46 KJ/kg

Now, From table A-6 attached and by interpolation at state 2 with temperature of 160°C and Pressure of 1 bar, we have;

Specific enthalpy;h2 = 3115.32 KJ/kg

Now, since stray heat transfer is neglected at turbine, we have;

-W' = m'[(h2 - h1) + ((V2)² - (V1)²)/2 + g(z2 - z1)]

Potential and kinetic energy can be neglected and so we have;

-W' = m'(h2 - h1)

Plugging in relevant values, the work of the turbine is;

W' = -2.784(3115.32 - 3179.46)

W' = 178.568 KW

B) Still From table A-6 attached and by interpolation at state 1 with temperature of 360°C and Pressure of 10 bar, we have;

Specific entropy: s1 = 7.3357 KJ/Kg.k

Still from table A-6 attached and by interpolation at state 2 with temperature of 160°C and Pressure of 1 bar, we have;

Specific entropy; s2 = 8.2828 KJ/kg.k

The amount of entropy produced is defined by;

ΔS = m'(s2 - s1)

ΔS = 2.784(8.2828 - 7.3357)

ΔS = 2.6367 KW/k

C) Still from table A-6 attached and by interpolation at state 2 with s2 = s2s = 8.2828 KJ/kg.k and Pressure of 1 bar, we have;

h2s = 2966.14 KJ/Kg

Energy equation for turbine at ideal process is defined as;

Q' - W' = m'[(h2 - h1) + ((V2)² - (V1)²)/2 + g(z2 - z1)]

Again, Potential and kinetic energy can be neglected and so we have;

-W' = m'(h2s - h1)

W' = -2.784(2966.14 - 3179.46)

W' = 593.88 KW

the isentropic turbine efficiency is defined as;

η = W_actual/W_ideal

η = 178.568/593.88 = 0.3

Answer:

critical clearing angle = 70.3°

Explanation:

Generator operating at = 50 Hz

power delivered = 1 pu

power transferable when there is a fault = 0.5 pu

power transferable before there is a fault = 2.0 pu

power transferable after fault clearance = 1.5 pu

using equal area criterion to determine the critical clearing angle

Attached is the power angle curve diagram and the remaining part of the solution.

The power angle curve is given as

= Pmax sinβ

therefore :  2sinβo = Pm

                   2sinβo = 1

                   sinβo = 0.5 pu

                   βo = [tex]sin^{-1} (0.5) = 30[/tex]⁰

also ;   1.5sinβ1 = 1

               sinβ1 = 1/1.5

               β1 = [tex]sin^{-1} (\frac{1}{1.5} )[/tex] = 41.81⁰

∴ βmax = 180 - 41.81  = 138.19⁰

attached is the remaining solution

The critical clearing angle = [tex]cos^{-1} 0.3372[/tex]  ≈ 70.3⁰

Answer:

[tex]\mathbf{F_{AB} = 13785.06 N }[/tex]

[tex]\mathbf{F_{AC} = -5062.38 N }[/tex]

[tex]\mathbf{F_{AD} = -5062.38 N }[/tex]

Explanation:

From the given information:

Let calculate the position vector of AB, AC, and AD

To start with AB; in order to calculate the position vector of AB ; we have:

[tex]r_{AB}^{\to} = r _{OA}^{\to} - r_{OB}^{\to} \\ \\ r_{AB}^{\to} = (2.6 \ \hat i + 2.6 \ \hat j - 2.2 \ \hat k ) - ( 1.5 \ \hat i + \ 1. 5 \hat j ) \\ \\ r_{AB}^{\to} = ( 2.6 \ \hat i - 1.5 \ \hat i + 2.6 \ \hat j - 1.5 \ \hat j - 2.2 \ \hat k) \\ \\ r_{AB}^{\to} = (1.1 \ \hat i + 1.1 \ \hat j - 2.2 \ \hat k ) m[/tex]

To calculate the position vector of AC; we have:

[tex]r_{AC}^{\to} = r _{OA}^{\to} - r_{OC}^{\to} \\ \\ r_{AC}^{\to} = (2.6 \ \hat i + 2.6 \ \hat j - 2.2 \ \hat k ) - ( 2\ \hat i + \ \hat j - 1.2 \ \hat k) \\ \\ r_{AC}^{\to} = ( 2.6 \ \hat i - 2\ \hat i + 2.6 \ \hat j - \ \hat j - 2.2 \ \hat k + 1.2 \ \hat k) \\ \\ r_{AC}^{\to} = (0.6 \ \hat i + 1.6 \ \hat j - \ \hat k ) m[/tex]

To calculate the position vector of AD ; we have:

[tex]r_{AD}^{\to} = r _{OA}^{\to} - r_{OD}^{\to} \\ \\ r_{AC}^{\to} = (2.6 \ \hat i + 2.6 \ \hat j - 2.2 \ \hat k ) - ( \hat i + \ 2 \hat j - 1.2 \ \hat k) \\ \\ r_{AD}^{\to} = ( 2.6 \ \hat i - \hat i + 2.6 \ \hat j - 2 \ \hat j - 2.2 \ \hat k + 1.2 \ \hat k) \\ \\ r_{AD}^{\to} = (1.6 \ \hat i + 0.6 \ \hat j - \ \hat k ) m[/tex]

However; let's calculate the force in AB, AC and AD in their respective unit vector form;

To start with unit vector AB by using the following expression; we have:

[tex]F_{AB}^{\to} = F_{AB} \dfrac{ r _{AB}^{\to} }{|r_{AB}^{\to}} \\ \\ \\ F_{AB}^{\to} = F_{AB} \dfrac{(1.1 \ \hat i + 1.1 \ \hat j - 2.2 \ \hat k ) }{\sqrt{ (1.1)^2 + (1.1)^2 + (-2.2 )^2 }} \\ \\ \\ F_{AB}^{\to} = F_{AB} \dfrac{(1.1 \ \hat i + 1.1 \ \hat j - 2.2 \ \hat k ) }{ \sqrt{7.26}} \\ \\ \\ F_{AB}^{\to} = F_{AB} \dfrac{(1.1 \ \hat i + 1.1 \ \hat j - 2.2 \ \hat k ) }{ 2.6944} \\ \\ \\ F_{AB}^{\to} = F_{AB} (0.408 \ \hat i+ 0.408 \ \hat j - 0.8165 \ \hat k ) N\\[/tex]

The force AC in unit vector form is ;

[tex]F_{AC}^{\to} = F_{AC} \dfrac{ r _{AC}^{\to} }{|r_{AC}^{\to}} \\ \\ \\ F_{AC}^{\to} = F_{AC} \dfrac{(0.6 \ \hat i + 1.6 \ \hat j - \ \hat k ) }{\sqrt{ (0.6)^2 + (1.6)^2 + (-1 )^2 }} \\ \\ \\ F_{AC}^{\to} = F_{AC} \dfrac{(0.6 \ \hat i + 1.6 \ \hat j - \ \hat k ) }{ \sqrt{3.92}} \\ \\ \\ F_{AC}^{\to} = F_{AC} \dfrac{(0.6 \ \hat i + 1.6 \ \hat j - \ \hat k ) }{1.9798} \\ \\ \\ F_{AC}^{\to} = F_{AC} (0.303 \ \hat i+ 0.808 \ \hat j - 0.505 \ \hat k ) N\\[/tex]

The force AD in unit vector form is ;

[tex]F_{AD}^{\to} = F_{AD} \dfrac{ r _{AD}^{\to} }{|r_{AD}^{\to}|} \\ \\ \\ F_{AD}^{\to} = F_{AD} \dfrac{(1.6 \ \hat i + 0.6 \ \hat j - \ \hat k ) }{\sqrt{ (1.6)^2 + (0.6)^2 + (-1 )^2 }} \\ \\ \\ F_{AD}^{\to} = F_{AD} \dfrac{(1.6 \ \hat i + 0.6 \ \hat j - \ \hat k ) }{ \sqrt{3.92}} \\ \\ \\ F_{AD}^{\to} = F_{AD} \dfrac{(1.6 \ \hat i + 0.6 \ \hat j - \ \hat k ) }{1.9798} \\ \\ \\ F_{AD}^{\to} = F_{AD} (0.808 \ \hat i+ 0.303 \ \hat j - 0.505 \ \hat k ) N\\[/tex]

Similarly ; the weight of the lunar Module is:

W = mg

where;

mass = 13500 kg

acceleration due to gravity=  1.82 m/s²

W = 13500 × 1.82

W = 24,570 N

Also. we known that the load is shared by four landing gears; Thus, the vertical reaction force exerted by the ground on each landing gear can be expressed as:

[tex]R =\dfrac{W}{4}[/tex]

[tex]R =\dfrac{24,570}{4}[/tex]

R = 6142.5 N

Now; the reaction force at point A in unit vector form is :

[tex]R^{\to} = Rk^{\to} \\ \\ R^{\to} = (6142.5 \ k ^{\to}) \ N[/tex]

Using the force equilibrium at the meeting point of the coordinates at A.

[tex]\sum F^{\to} = 0[/tex]

[tex]F_{AB}^{\to} +F_{AC}^{\to} + F_{AD}^{\to} + R^{\to} =0[/tex]

[tex][F_{AB} (0.408 \ \hat i + 0.408 \ \hat j - 0.8165 \ \hat k ) N + F_{AC} (0.303 \ \hat i + 0.808 \ \hat j - 0.505 \ \hat k ) N + F_{AD} (0.808 \ \hat i + 0.303 \ \hat j - 0.505 \ \hat k) N + (6142.5 \ k^ \to ) ][/tex]

[tex]= [ ( 0.408 F_{AB} +0.303 F_{AC} + 0.808F_{AD}) \hat i + (0.408 F_{AB}+0.808F_{AC}+0.303F_{AD}) \hat j + (-0.8165 F_{AB} -0.505F_{AC} -0.505 F_{AD} +6142.5 ) k ^ \to ] = 0[/tex]

From above; we need to relate and equate each coefficients i.e i ,j, and [tex]k ^ \to[/tex] on both sides ; so, we can re-write that above as;

[tex]0.408 F_{AB} +0.303 F_{AC} + 0.808F_{AD}) =0 \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ --- (1) \\ \\ 0.408 F_{AB}+0.808F_{AC}+0.303F_{AD}) =0 \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ --- (2) \\ \\ -0.8165 F_{AB} -0.505F_{AC} -0.505 F_{AD} +6142.5 = 0 --- (3)[/tex]

Making rearrangement and solving by elimination method;

[tex]\mathbf{F_{AB} = 13785.06 N }[/tex]

[tex]\mathbf{F_{AC} = -5062.38 N }[/tex]

[tex]\mathbf{F_{AD} = -5062.38 N }[/tex]

The force vector of each member, depends on the magnitude of the

force and the unit vector of the member.

Responses:

The force supported by the members are;

Resolving the given members into unit vectors gives;

[tex]\hat u_{AB} = \mathbf{\dfrac{(2.6 - 1.5) \cdot \hat i + (2.6 - 1.5)\cdot \hat j + (-2.2)\cdot \hat k }{\sqrt{(2.6- 1.5)^2 + (2.6 - 1.5)^2 + (-2.2)^2}}}[/tex][tex]\dfrac{(2.6 - 1.5) \cdot \hat i + (2.6 - 1.5)\cdot \hat j + (-2.2)\cdot \hat k }{\sqrt{(2.6- 1.5)^2 + (2.6 - 1.5)^2 + (-2.2)^2}}= 0.40825 \cdot \hat i + 0.40825\cdot \hat j - 0.81625\cdot \hat k[/tex]

Similarly, we have;

[tex]\hat u_{AC} =\mathbf{ \dfrac{(2.6 - 2) \cdot \hat i + (2.6 - 1)\cdot \hat j + (-2.2+1.2)\cdot \hat k }{\sqrt{(2.6- 2)^2 + (2.6 - 1)^2 + (-2.2+1.2)^2}}}[/tex]

[tex]\dfrac{(2.6 - 2) \cdot \hat i + (2.6 - 1)\cdot \hat j + (-2.2+1.2)\cdot \hat k }{\sqrt{(2.6- 2)^2 + (2.6 - 1)^2 + (-2.2+1.2)^2}} =\dfrac{0.6\cdot \hat i +1.6\cdot \hat j -1\cdot \hat k }{\sqrt{0.6^2 + 1.6^2 + (-1.)^2}}[/tex]

[tex]\dfrac{0.6\cdot \hat i +1.6\cdot \hat j -1\cdot \hat k }{\sqrt{0.6^2 + 1.6^2 + (-1.)^2}}= 0.303046\cdot \hat i + 0.80812\cdot \hat j - 0.50508\cdot \hat k[/tex]

[tex]\hat u_{AD} =\mathbf{ \dfrac{(2.6 - 1) \cdot \hat i + (2.6 -2)\cdot \hat j + (-2.2 + 1.2)\cdot \hat k }{\sqrt{(2.6-1)^2 + (2.6 -2))^2 + (-2.2 + 1.2)^2}}}[/tex]

[tex]\hat u_{AD} =\mathbf{0.80812\cdot \hat i+ 0.303046\cdot \hat j - 0.50508\cdot \hat k}[/tex]

The forces are therefore;

[tex]\vec F_{AB} =\mathbf{ F_{AB} \cdot \left ( 0.40825 \cdot \hat i + 0.40825\cdot \hat j - 0.81625\cdot \hat k \right)}[/tex]

[tex]\vec F_{AC} =\mathbf{ F_{AC} \cdot \left (0.303046\cdot \hat i + 0.80812\cdot \hat j - 0.50508\cdot \hat k\right)}[/tex]

[tex]\vec F_{AD} = \mathbf{F_{AD} \cdot \left (0.80812\cdot \hat i+ 0.303046\cdot \hat j - 0.50508\cdot \hat k\right)}[/tex]

[tex]Weight \ on \ the \ assembly = \dfrac{13,500 \, kg \times 1.82 \, m/s^2}{4} = 6,142.5 \, \hat k N[/tex]

Which gives;

[tex]\mathbf{0.40825 \cdot \hat i \cdot F_{AB}}[/tex] + [tex]0.303046\cdot \hat i \cdot F_{AC}[/tex] + [tex]0.80812\cdot \hat i \cdot F_{AD}[/tex] = 0

[tex]0.40825 \cdot \hat j \cdot F_{AB}[/tex] + [tex]0.80812\cdot \hat j \cdot F_{AC}[/tex] + [tex]0.303046 \cdot \hat j \cdot F_{AD}\left[/tex] = 0

[tex]-0.81625\cdot \hat k \cdot F_{AB}[/tex] - [tex]0.50508\cdot \hat k \cdot F_{AC}[/tex] - [tex]0.50508\cdot \hat k \cdot F_{AD}[/tex] +  [tex]\mathbf{6,142.5 \, \hat k}[/tex] = 0

Which gives;

[tex]-0.81625\cdot \hat k \cdot F_{AB}[/tex] - [tex]0.50508\cdot \hat k \cdot F_{AC}[/tex] - [tex]0.50508\cdot \hat k \cdot F_{AD}[/tex] =  [tex]-6,142.5 \, \hat k[/tex]

Solving gives;

Learn more about unit vectors here:

https://brainly.com/question/13289984

https://brainly.com/question/18703034

Answer:

Following are the conversion to this question:

Explanation:

In point (a):

[tex]\to \frac{36459080}{8} = 4557385 + \ \ \ \ \ \ \ \ \ \frac{0}{8}\\\\\to \frac{4557385}{8} = 569673 + \ \ \ \ \ \ \ \ \ \frac{1}{8}\\\\\to \frac{569673}{8} = 71209+ \ \ \ \ \ \ \ \ \ \frac{1}{8}\\\\\to \frac{71209}{8}=8901+\ \ \ \ \ \ \ \ \ \ \ \frac{1}{8}\\\\\to \frac{8901}{8}=1112+ \ \ \ \ \ \ \ \ \ \ \ \ \frac{5}{8}\\\\\to \frac{1112}{8}=139+ \ \ \ \ \ \ \ \ \ \ \frac{0}{8}\\\\\to \frac{139}{8}=17+ \ \ \ \ \ \ \ \ \ \ \frac{3}{8}\\\\\to \frac{17}{8}=2+ \ \ \ \ \ \ \ \ \ \ \ \ \frac{1}{8}\\\\[/tex]

[tex]\to \frac{2}{8}=0+ \ \ \ \ \ \ \ \ \ \frac{2}{8}\\\\ \bold{(36459080)_{10}=(213051110)_8}[/tex]

In point (b):

[tex]\to \frac{20960032010}{16} = 13100020+ \ \ \ \ \ \ \ \ \ \frac{0}{16}\\\\\to \frac{13100020}{16} = 818751+ \ \ \ \ \ \ \ \ \ \frac{4}{16}\\\\\to \frac{818751}{16} = 51171+ \ \ \ \ \ \ \ \ \ \frac{15}{16}\\\\\to \frac{51171}{16}=3198+\ \ \ \ \ \ \ \ \ \ \ \frac{3}{16}\\\\\to \frac{3198}{16}=199+ \ \ \ \ \ \ \ \ \ \ \ \ \frac{14}{1}\\\\\to \frac{199}{16}=12+ \ \ \ \ \ \ \ \ \ \ \frac{7}{16}\\\\\to \frac{12}{16}=0+ \ \ \ \ \ \ \ \ \ \ \frac{12}{16}\\\\ \bold{(20960032010)_{10}=(C7E3F40)_{16}}[/tex]

In point (c):

[tex]\to (2423233303003040)_s=(88757078520)_{10}\\\\\to \frac{88757078520}{25}= 3550283140+ \ \ \ \ \ \ \ \ \ \frac{20}{25}\\\\ \to \frac{3550283140}{25}= 142011325+ \ \ \ \ \ \ \ \ \ \frac{15}{25}\\\\\to \frac{142011325}{25}= 5680453+ \ \ \ \ \ \ \ \ \ \frac{0}{25}\\\\\to \frac{5680453}{25}= 227218+ \ \ \ \ \ \ \ \ \ \frac{3}{25}\\\\\to \frac{227218}{25}= 9088+ \ \ \ \ \ \ \ \ \ \frac{18}{25}\\\\\to \frac{9088}{25}= 363+ \ \ \ \ \ \ \ \ \ \frac{13}{25}\\\\[/tex]

[tex]\to \frac{363}{25}= 14+ \ \ \ \ \ \ \ \ \ \frac{13}{25}\\\\\to \frac{14}{25}= 0+ \ \ \ \ \ \ \ \ \ \frac{14}{25}\\\\\bold{(2423233303003040)_s=(EDDI30FK)_{25}}[/tex]

Symbols of Base 25 are as follows:

[tex]0, 1, 2, 3,4,5,6,7,8,9,A,B,C,D,E,F,G,H,I,J,K,L,M,N, \ and \ O[/tex]

Answer:

a) T₃ = 1818.8 K

b) η = 0.614 = 61.4%

c) MEP = 660.4 kPa

Explanation:

a) According to Table A-2 of The ideal gas specific heat of gases, the properties of air are as following:

At 300K

The specific heat capacity at constant pressure = [tex]c_{p}[/tex] = 1.005 kJ/kg.K,

The specific heat capacity at constant volume = [tex]c_{v}[/tex] = 0.718 kJ/kg.K

Gas constant R for air = 0.2870 kJ/kg·K

Ratio of specific heat  k = 1.4

Isentropic Compression :

[tex]T_{2}[/tex] =  [tex]T_{1}[/tex]  [tex](v1/v2)^{k-1}[/tex]

   = 300K ([tex]16^{0.4}[/tex])

[tex]T_{2}[/tex]    = 909.4K

P = Constant heat Addition:

[tex]P_{3}v_{3} / T_{3} = P_{2} v_{2} /T_{2}[/tex]

[tex]T_{3}=v_{3}/v_{2}T_{2}[/tex]

2[tex]T_{2}[/tex] = 2(909.4K)

      = 1818.8 K

b) [tex]q_{in}[/tex] = [tex]h_{3}-h_{2}[/tex]

         =  [tex]c_{p}[/tex] ([tex]T_{3}[/tex] - [tex]T_{2}[/tex])

         = (1.005 kJ/kg.K)(1818.8 - 909.4)K

         = 913.9 kJ/kg

Isentropic Expansion:

[tex]T_{4}[/tex] =  [tex]T_{3}[/tex]  [tex](v3/v4)^{k-1}[/tex]

    =  [tex]T_{3}[/tex] [tex](2v_{2} /v_{4} )^{k-1}[/tex]

    = 1818.8 K (2 / 16[tex])^{0.4}[/tex]

    = 791.7K

v = Constant heat rejection

[tex]q_{out}[/tex] = μ₄ - μ₁

      = [tex]c_{v} ( T_{4} - T_{1} )[/tex]

      = 0.718 kJ/kg.K (791.7 - 300)K

      = 353 kJ/kg

 η[tex]_{th}[/tex] = 1 - [tex]q_{out}[/tex] / [tex]q_{in}[/tex]

       = 1 - 353 kJ/kg / 913.9 kJ/kg

       = 1 - 0.38625670

       = 0.6137

       = 0.614

      = 61.4%

c) [tex]w_{net}._{out}[/tex] = [tex]q_{in}[/tex] - [tex]q_{out}[/tex]

                = 913.9 kJ/kg - 353 kJ/kg

                = 560.9 kJ/kg

[tex]v_{1} = RT_{1} /P_{1}[/tex]

   = (0.287 kPa.m³/kg/K)*(300 K) / 95 kPa

   =  86.1 / 95

   = 0.9063 m³/kg = v[tex]_{max}[/tex]

[tex]v_{min} =v_{2} = v_{max} /r[/tex]

Mean Effective Pressure = MEP =   [tex]w_{net,out}/v_{1} -v_{2}[/tex]

                                                    = [tex]w_{net,out}/v_{1}(1-1)/r[/tex]

                                                    = 560.9 kJ/kg / (0.9063 m³/kg)*(1-1)/16

                                                    = (560.9 kJ / 0.8493m³) (kPa.m³/kJ)

                                                    = 660.426 kPa

Mean Effective Pressure = MEP = 660.4 kPa

The temperature after the addition process is 1724.8k, the thermal efficiency of the engine is 56.3% and the mean effective pressure is 65.87kPa

Assumptions made:

a) The temperature after the addition process:

Considering the process 1-2, Isentropic expansion

at

[tex]T_1=300k\\u_1=214.07kJ/kg\\v_o_1=621.3\\v_o_2=\frac{v_2}{v_1} *v_o_1[C.R=16]=v_2/v_1\\v_o_2=(v_2/v_1)v_o_1=1/16*621.2=38.825[/tex]

From using this value, v[tex]_o_2[/tex]=38.825, solve for state point 2;

[tex]T_2=862.4k\\h_2=890.9kJ/kg[/tex]

Considering the process 2-3 (state of constant heat addition)

[tex]\frac{p_3v_3}{t_3}=\frac{p_2v_2}{t_2} \\\\T_3=\frac{P_3V_3T_2}{V_2} \\T_3=(\frac{V_3}{V_2}) T_2\\\frac{v_3}{v_2}=2\\T_3=2(862.4)=1724.8k\\[/tex]

NB: p[tex]_3[/tex]≈p[tex]_2[/tex]

b) The thermal efficiency of the engine is

Q[tex]_i_n[/tex]=h[tex]_3-h_2[/tex] = 1910.6-890.9=1019.7kJ/kg

Considering process 3-4,

[tex]v_o_4=\frac{v_A}{v_2}\\ v_o_3 =\frac{V_a}{V_2}*\frac{v_2}{v_3}\\v_o_3=\frac{16}{2}*4.546\\v_o_3=36.37;v_4=659.7kJ/kg[/tex]

Q[tex]_o_u_t=v_4-u_1=659.7-214.07=445.3kJ/kg[/tex]

nth = [tex]1-\frac{Q_o_u_t}{Q_i_n}=1-\frac{445.63}{1019.7}=0.5629*100=56.3%[/tex]%

The thermal efficiency is 56.3%

W[tex]_n_e_t[/tex]=[tex]Q_i_n-Q_o_u_t=574.07kJ/kg[/tex]

[tex]v_1=\frac{RT_1}{p_1}=\frac{0.287*300}{95}=0.906m^3/kg\\v_2=v_1/16=0.05662m^3/kg\\[/tex]

Therefore, the mean effective pressure of the system engine is

[tex]\frac{W_n_e_t}{v_1-v_2}=675.87kPa[/tex]

The mean effective pressure is 65.87kPa as calculated above

Learn more about mean effective pressure

https://brainly.com/question/19309495

Answer:

HVACR Industry Trade Groups

Explanation:

Answer:

The answer is 2.25 kΩ

Explanation:

Solution

Given that:

The resistance reading on a DMM'S meter face = 22.5 ohms

The range selector switch = R * 100 range,

We now have to find the actual measure resistance of the circuit which is given below:

The actual measured resistance of the circuit is=R * 100

= 22.5 * 100

=2.25 kΩ

Hence the measured resistance of the circuit is 2.25 kΩ

Answer:

A) V_peak ≈ 165 V

B) V_rms ≈ 24 V

C) V_peak ≈ 311 V

D) V_peak ≈ 311 KV

Explanation:

Formula for RMS value is given as;

V_rms = V_peak/√2

Formula for peak value is given as;

V_peak = V_rms x √2

A) At RMS value of 117 V, peak value would be;

V_peak = 117 x √2

V_peak = 165.46 V

V_peak ≈ 165 V

B) At peak value of 33.9 V, RMS value would be;

V_rms = 33.9/√2

V_rms = 23.97 V

V_rms ≈ 24 V

C) At RMS value of 220 V, peak value is;

V_peak = 220 × √2

V_peak = 311.13 V

V_peak ≈ 311 V

D) At RMS value of 220 KV, peak value is;

V_peak = 220 × √2

V_peak = 311.13 KV

V_peak ≈ 311 KV

Answer:

1.887 minutes

Explanation:

We are given k = 0.07 dm3 /mol*min at 300 K and E = 20 kcal/mol = 20000 cal/mol

To solve this, first of all let's calculate the rate constant(k);

For this question, The formula is;

K(t) = k(300K) × exp[(E/R)((1/300) - (1/T2))]

R is gas constant = 1.987 cal/mol.K

For temperature of 70°C which is = 70 + 273K = 343K, we have;

K(343) = 0.07 × exp[(20000/1.987)((1/300) - (1/343))]

K(343) = 4.7 dm³/mol.min

The design equation is;

dX/dt = -(rA/C_Ao) = K•(C_Ao)²•(1 - X)²/(C_Ao) = (KC_Ao)(1 - X)²

Since there is no change in volume by cause of the state at which the reaction is carried out, that is liquid. Thus, integrating and solving for time for a 90% conversion we obtain;

(0.9,0)∫dX/(1 - X)².dX = (KC_Ao)((t, 0)∫dt

So, we'll get;

0.9/(1 - 0.9) = 4.77 × 1 × t

t = 9/4.77

t = 1.887 minutes

The negative mark is balanced by a positive mark on the set key scale while the jaws are closed.

It is common practice to shut the jaws or faces of the system before taking some reading to guarantee a zero reading. If not, please take care of the read. This read is referred to as "zero defect."

There are two forms of zero error:

zero-mistake positive; and

Non-null mistake.

----------------------------

Hope this helps!

Brainliest would be great!

----------------------------

With all care,

07x12!

Answer:

The answer is B. Avoid making a large wake.

Explanation:

When passing a fishing boat it is important to maintain a minimal wake due to the dangers a large wake could pose to the fishing boat you are passing, it is part of maintaining safety on the water.

You can not pass on the sides with the fishing lines also, and you are supposed to communicate to the fishing boat before taking the appropriate action.

Answer:

the answer is

Explanation:

Answer:

650°C  or 1,200°F

Explanation:

Data provided in the question

Steel alloy contains 93.8 wt% Fe, 6.0 wt% Ni, and 0.2 wt% C

Plus we also assume that there are no changes in the boundaries of postions who have other phases but there is an addition of Ni.

Based on the above information, the approximate eutectoid temperature of this alloy for 6.1 wt% is 650°C  or 1,200°F

Answer:

Hello your question lacks some values here are the values

T1 = 500⁰c,  T7 = 70⁰c, Qb = 240000 kj/s

answer : A)  56%

               B) 134400 kw ≈  134.4 Mw

Explanation:

Given values

T1 (tmax) = 500⁰c = 773 k

T7(tmin) = 70⁰c = 343 k

Qb = 240000 kj/s

A) Determine the maximum possible efficiency

[tex]n_{max}[/tex] = 1 - [tex]\frac{tmin}{tmax}[/tex] * 100

       = 1 - ( 343 / 773 )

       = 1 - 0.44 = 0.5562 * 100 ≈ 56%

B) Determine the power output for this complex steam power plant design

[tex]p_{out}[/tex] = Qb * max efficiency

      = 240000 kj/s * 56%

      = 240000 * 0.56 = 134400 kw ≈  134.4 Mw

Answer:

[tex]W_s =[/tex] 283.181 hp

Explanation:

Given that:

Air enters a compressor operating at steady state at a pressure [tex]P_1[/tex] =  176.4 lbf/in.^2  and Temperature [tex]T_1[/tex] at 260°F

Volumetric flow rate V = 424 ft^3/min

Air exits at a pressure [tex]P_2[/tex]  = 15.4 lbf/in.^2 and Temperature [tex]T_2[/tex] at 80°F.

Heat transfer occurs at a rate of 6800 Btu/h from the compressor to its surroundings; since heat is released to the surrounding; then:

[tex]Q_{cv}[/tex] = -6800 Btu/h  = - 1.9924 kW

Using the steady  state  energy in the process;

[tex]h_2 - h_1 + g(z_2-z_1)+ \dfrac{1}{2}(v^2_2-v_1^2) = \dfrac{Q_{cv}}{m}- \dfrac{W_s}{m}[/tex]

where;

[tex]g(z_2-z_1) =0[/tex]  and  [tex]\dfrac{1}{2}(v^2_2-v_1^2) = 0[/tex]

Then; we have :

[tex]h_2 - h_1 = \dfrac{Q_{cv}}{m}- \dfrac{W_s}{m}[/tex]

[tex]h_2 - h_1 = \dfrac{Q_{cv} - W_s}{m}[/tex]

[tex]{m}(h_2 - h_1) ={Q_{cv} - W_s}[/tex]

[tex]W_s ={Q_{cv} + {m}(h_2 - h_1)[/tex] ----- (1)

Using the relation of Ideal gas equation;

P₁V₁ = mRT₁

Pressure [tex]P_1[/tex] =  176.4 lbf/in.^2   = ( 176.4 ×  6894.76 ) N/m² = 1216235.664 N/m²

Volumetric flow rate V = 424 ft^3/min = (424 ×  0.0004719) m³  /sec

= 0.2000856 m³  /sec

Temperature = 260°F = (260°F − 32) × 5/9 + 273.15 = 399.817 K

Gas constant R=287 J/kg K

Then;

1216235.664 N/m² × 0.2000856 m³  /sec = m × 287 J/kg K × 399.817 K

[tex]m = \dfrac { 1216235.664 N/m^2 \times 0.2000856 m^3 /sec } {287 J/kg K \times 399.817 K }[/tex]

m = 2.121 kg/sec

The change in enthalpy:

[tex]m(h_1-h_2) = m * C_p * \Delta T= m* C_p * ( T_1 -T_2)[/tex]

[tex]= 2.121* 1.005* ( 399.817 -299.817)[/tex]

= 213.1605 kW

From (1)

[tex]W_s ={Q_{cv} + {m}(h_2 - h_1)[/tex]

[tex]W_s =[/tex]  - 1.9924 kW + 213.1605 kW

[tex]W_s =[/tex] 211.1681  kW

[tex]W_s =[/tex] 283.181 hp

The power input is [tex]W_s =[/tex] 283.181 hp

Answer:

a.) 4.46 m/s

b.) 0.41 m/s

Explanation:

a) Given that the mass M of the bullet = 30g = 30/1000 = 0.03 kg

Velocity V = 450 m/s

From conservative of linear momentum,

Sum of momentum before impact = Sum of momentum after impact

0.03 × 450 = (0.03 + 3 ) × v₂

v₂ = 13.5/3.03 = 4.4554 m/s

Therefore the velocity of the bullet and B after the first impact = 4.46 m/s approximately

(b) To calculate the velocity of the carrier, you will consider the conservation of linear momentum again.

(m₁ + m₂)×v₂  = (m₁ + m₂ + m₃)×v₃

Where:

Mass of the carrier m₃ = 30 kg

Substitute all the parameters into the formula

3.03×4.4554 = (3.03 +30) × v₃

v₃ = 13.5 / 33.03 = 0.40872 m/s

Therefore the velocity of the carrier is 0.41 m/s approximately.

Answer:

- 1.19 lb/ft^3

Explanation:

You are given the following information;

Radius r = 20 ft

Speed V = 100 ft/s

You should use Bernoulli equation pertaining to streamline. That is, normal to streamline.

The pressure gradient = dp/dn

Where air density rho = 0.00238 slugs per cubic foot.

Please find the attached files for the solution and diagram.

Answer:

The answer is 920 kJ

Explanation:

Solution

Given that:

Mass = 5kg

Pressure = 600 kPa

Temperature = 80° C

Liquid vapor mixture state (quality) = 0.3

Now we find out the amount of heat extracted in the process

Thus

Properties of  RI34a at:

P₁ = 600 kPa

T₁ = 80° C

h₁ = 320 kJ/kg

So,

P₁ = P₂ = 600 kPa

X₂ =0.3

h₂ = 136 kJ/kg

Now

The heat removed Q = m(h₁ -h₂)

Q = 5 (320 - 136)

Q= 5 (184)

Q = 920 kJ

Therefore the amount of heat extracted in the process is 920 kJ

Answer:

b

Explanation:

a) ADC is located on DAQ filter but not the reconstruction filter

b) to remove aliasing, the sampling rate must be greater than or equal ot twice the highest frequency component in the input signal. In other words, all frequencies in input sgnal are less than fs/2. Therefore, frequencies greater than fs/2 are removed by anti-aliasing filter

c) the DAC can have different sampling rate from ADC

Answer:

hello the answer options are missing here are the options

A)The thickness of the heated region near the plate is increasing

B)The velocities near the plates are increasing

C)The fluid temperature near the plate are increasing

ANSWER : all of the above

Explanation:

Laminar flow  is the flow of a type of fluid across the surface of an object following regular paths and it is unlike a turbulent flow which flows in irregular paths (encountering fluctuations)

For laminar flow over a hot flat plate, the local heat transfer coefficient decreases with distance because :

Answer:

A 3-phase, 50 Hz, 110 KV overhead line has conductors

Explanation:

hope it will helps you

Answer:

2.47  ft

Explanation:

Given that:

The initial temperature of air = 80°F

Diameter of the pipe = 72 ft

average velocity [tex]v_{air}[/tex] of the air flow through the pipe =  34 ft/s

The objective is to determine the diameter of the  pipe to  be used to move water at:

At a temperature = 60°F   &

An average velocity [tex]v_{water}[/tex] of 71 ft/s

Assuming Reynolds number similarity is enforced;

where :

kinematic viscosity (V_air) of air at 80 °F  (V_air)  = 1.69 × 10⁻⁴ ft²/s

kinematic viscosity of water  at 60 °F (V_water) = 1.21 × 10⁻⁵ ft²/s

The diameter of the pipe can be calculated by using the expression:

[tex]D_{water} = \dfrac{V_{water}}{V_{air}}*\dfrac{v_{air}}{v_{water}}* D_{air}[/tex]

[tex]D_{water} = \dfrac{1.21*10^{-5} \ ft^2/s}{1.69*10^{-4} \ ft^2/s}*\dfrac{34 \ ft/s}{71 \ ft/s}* 72 \ ft[/tex]

[tex]D_{water} =[/tex] 2.4686  ft

[tex]D_{water} =[/tex] 2.47 ft   ( to two decimal places)

Thus; diameter pipe to be use to move water at the given temperature and average velocity is 2.47 ft

Answer:

2.47  ft

Explanation:

Given that:

The initial temperature of air = 80°F

Diameter of the pipe = 72 ft

average velocity  of the air flow through the pipe =  34 ft/s

The objective is to determine the diameter of the  pipe to  be used to move water at:

At a temperature = 60°F   &

An average velocity  of 71 ft/s

Assuming Reynolds number similarity is enforced;

where :

kinematic viscosity (V_air) of air at 80 °F  (V_air)  = 1.69 × 10⁻⁴ ft²/s

kinematic viscosity of water  at 60 °F (V_water) = 1.21 × 10⁻⁵ ft²/s

The diameter of the pipe can be calculated by using the expression:

2.4686  ft

2.47 ft   ( to two decimal places)

Thus; diameter pipe to be use to move water at the given temperature and average velocity is 2.47 ft

Answer:

The answer to this question can be defined as follows:

Explanation:

The sky driver began his sky journey from Arkansas, drove across the Tennessee River then landed in North Carolina. He returned to both the north in the very same direction. He began with NC, traveled through Tennessee, eventually lands in Arkansas. But North Carolina has been in the third state on which skydiver was traveling over, and It's also more than 700 miles from Arkansas to the NC.

Answer:

i) Truth Table:

A      |     B     |     C     |     O

0      |     0     |     0     |      0

0      |     0     |     1      |      0

0      |     1      |     0     |      0

0      |     1      |     1      |      0    (condition 2 not satisfied)

1       |     0     |     0     |      0

1       |     0     |     1      |      1    (both conditions satisfied)

1       |     1      |     0     |      1    (both conditions satisfied)

1       |     1      |     1      |      1    (both conditions satisfied)

ii) The minimized sum of products (SOP) expression is

O = AC + AB

Explanation:

We have three inputs A, B and C

Let O is the output.

We are given two conditions to open the vault door:

1. At  least two people must insert their keys into the assigned locks at the same  time.

2. The trainee bank teller (C) can only open the vault when the bank  manager (A) is present in the opening.

i) Construct the Truth Table

A      |     B     |     C     |     O

0      |     0     |     0     |      0

0      |     0     |     1      |      0

0      |     1      |     0     |      0

0      |     1      |     1      |      0    (condition 2 not satisfied)

1       |     0     |     0     |      0

1       |     0     |     1      |      1    (both conditions satisfied)

1       |     1      |     0     |      1    (both conditions satisfied)

1       |     1      |     1      |      1    (both conditions satisfied)

ii) SOP Expression using Karnaugh-Map:

A 3 variable Karnaugh-map is attached.

The minimized sum of products (SOP) expression is

O = AC + AB

The orange pair corresponds to "AC" and the purple pair corresponds to "AB"

Bonus:

The above expression may be realized by using two AND gates and one OR gate.  

Please refer to the attached logic circuit diagram.

Answer:

B- Fluorinated gas

Explanation:

Answer:

B.) fluorinated gas

Explanation:

Answer:

dx/dt = kx(9000-x) where k > 0

Explanation:

Number of students in the campus, n = 9000

Number of students who have contracted the flu = x(t) = x

Number of students who have bot yet contracted the flu = 9000 - x

Number of Interactions between those that have contracted the flu and those that are yet to contract it = x(9000 - x)

The rate of spread of the disease = dx/dt

Note: the rate at which the disease spread is proportional to the number of interactions between those that have contracted the flu and those that have not contracted it.

[tex]\frac{dx}{dt} \alpha [x(9000 -x)]\\[/tex]

Introducing a constant of proportionality, k:

dx/dt = kx(9000-x) where k > 0

Answer:

A ball bearing has been selected with the bore size specified in the catalog as 35.000 mm to 35.020 mm. Specify.... ... has been selected with the bore size specified in the catalog as 35.000 mm to 35.020 mm. Specify appropriate minimum and maximum shaft diameters to provide a locational interference fit.

Explanation:

Answer:

No, the velocity profile does not change in the flow direction.

Explanation:

In a fluid flow in a circular pipe, the boundary layer thickness increases in the direction of flow, until it reaches the center of the pipe, and fill the whole pipe. If the density, and other properties of the fluid does not change either by heating or cooling of the pipe, then the velocity profile downstream becomes fully developed, and constant, and does not change in the direction of flow.

Answer:

100000000000000000000000