Answer:
1.8 m
Explanation:
Given: Glass falls from a table, smashes 0.6 seconds later
To find: How high a table is
Formula: Vv=gt, dv=1/2gt^2, t=2d/g
Solution: A table's height is measured from the top of the edge down to the floor. The tables are shown both have a height of 30 inches, which is common for many tables.
Data
t = 0.6sg = 9.81 m/s²d = ?Equation
d = [tex]\frac{1}{2}[/tex][tex]gt[/tex]²Math & Units
d = 4.905 (0.6²)d = 442.676Hence the table is 1.8 m high
Excluding the noble gas group, how does the number of valence electrons in an element influence its chemical stability?
A. Elements with intermediate numbers of valence electrons are the last chemically stable.
B. Elements with the highest number of valence electrons are the most chemically stable.
C. Elements with intermediate number of valence electrons are the most chemically stable.
D. Elements wit the lowest number of valence electrons are the most chemically stable.
Answer:
C. Elements with intermediate number of valence electrons are the most chemically stable.
Calculati rezistenta filamentului unui bec al lanternei de buzunar daca la tensiunea de 3,5 v el este parcurs de un curent cu intensitatea de 0,28 A
Answer:
Resistencia = 12.5 Ohmios
Explanation:
Dados los siguientes parámetros;
Voltaje = 3.5 Volts
Corriente = 0.28 Amps
Para encontrar el resistencia;
La ley de Ohm establece que a temperatura constante, la corriente que fluye en un circuito eléctrico es directamente proporcional al voltaje aplicado en los dos puntos e inversamente proporcional a la resistencia en el circuito eléctrico.
Matemáticamente, La ley de Ohm viene dada por la fórmula;
Voltaje = corriente * resistencia
Resistencia = voltaje/corriente
Resistencia = 3.5/0.28
Resistencia = 12.5 Ohmios
Por tanto, la resistencia del filamento de una linterna de bolsillo es de 12,5 ohmios.
Which statements about braking a car are true?
The greater the kinetic energy of a car, the longer it takes for the car to stop.
The lower the kinetic energy of a car, the longer it takes for the car to stop.
If the speed of a car doubles, the car’s kinetic energy and braking distance quadruple.
If the speed of a car doubles, the car’s kinetic energy and braking distance remain the same.
Answer:
the first statement...
Answer:
The first answer is correct.
Plz mark brainliest.
Hope I helped.
Explanation:
A 1,000 kg car traveling 15.0 m/s brakes and comes to a stop after traveling 20.0 m.
a. What is the car’s initial kinetic energy?
b. What is the car’s final kinetic energy?
c. How much work does it take to stop the car?
d. How much constant force is applied in bringing the car to a stop?
A. The car’s initial kinetic energy is 112500 J
B. The car’s final kinetic energy is 0 J
C. The amount of work done to stop the car is –112500 J
D. The force applied in bringing the car to a stop is –5625 N
A. How to determine the initial kinetic energy Mass (m) = 1000 KgInitial velocity (u) = 15 m/sInitial kinetic energy (KEᵢ) =?KEᵢ = ½mu²
KEᵢ = ½ × 1000 × 15²
KEᵢ = 112500 J
B. How to determine the final kinetic energy Mass (m) = 1000 KgFinal velocity (v) = 0 m/sFinal kinetic energy (KEբ) =?KEբ = ½mv²
KEբ = ½ × 1000 × 0²
KEբ = 0 J
C. How to determine the workdone Initial kinetic energy (KEᵢ) = 112500 J Final kinetic energy (KEբ) = 0 JWorkdone (Wd) =?Wd = KEբ – KEᵢ
Wd = 0 – 112500
Wd = –112500 J
D. How to determine the forceWe'll begin by calculating the acceleration. This can be obtained as follow:
Initial velocity (u) = 15 m/sFinal velocity (v) = 0 m/sDistance (s) = 20 mAcceleration (a) =?v² = u² + 2as
0² = 15² + (2 × a × 20)
0 = 225 + 40a
Collect like terms
0 – 225 = 40a
–225 = 40a
Divide both side by 40
a = –225 / 40
a = –5.625 m/s²
Finally, we shall determine the force. This is illustrated below:
Mass (m) = 1000 KgAcceleration (a) = –5.625 m/s²Force (F) =?F = ma
F = 1000 × –5.625
F = –5625 N
Learn more about energy:
https://brainly.com/question/10703928
Apply: The earth's gravity is pulling on you. Are you pulling on the earth? Explain your
reasoning.
Answer:
Yes, you are pulling on Earth. Reasoning. Third Newton's law of motion, action and reaction law, sates that for every action force, there is an equal (in magnitude) and opposite reaction force.
Explanation:
goo gle.
A wire of radius 5 x 10⁻⁴ m is needed to prepare a coil of resistance 40 Ω. The resistivity of the material of the wire is 3.14x10⁻⁷ Ωm. Calculate the length of the wire.
Answer:
100 m
Explanation:
From the question,
R = Lρ/A.................... Equation 1
Where R = resistance of the wire, L = length of the wire, ρ = resistivity of the wire, A = cross sectional area of the wire.
But,
A = πr².................... Equation 2
Where r = radius of the wire.
Substitute equation 2 into equation 1
R = Lρ/πr²
Make L the subject of the equation
L = Rπr²/ρ...................... Equation 3
Given: R = 40 Ω, r = 5×10⁻⁴ m, ρ = 3.14×10⁻⁷ Ωm
Constant: π = 3.14
Substitute these values into equation 3
L = [40×3.14×( 5×10⁻⁴)²]/ (3.14×10⁻⁷)
L = 40×3.14×25×10⁻⁸/(3.14×10⁻⁷)
L = 100 m
Hence the length of the wire is 100 m
A race car has a mass of 710kg. It starts from rest and speeds up to 12m/s in 12.0s. The car is uniformly accelerated during the entire time. What net force is applied to it?
Help me please I need to turn it in before midnight...
Answer:
The statement which explains how the total time spent in the air is affected as the projectile's angle of launch increases from 25 degrees to 50 degrees is;
C. Increasing the angle from 25° to 50° will increase the total time spent in the air
Explanation:
The equation that can be used to find the total time, T, spent in the air of a projectile is given as follows;
[tex]T = \dfrac{2 \cdot u \cdot sin(\theta) }{g}[/tex]
Where;
T = The time of flight of the projectile = The time spent in the air
u = The initial velocity of the projectile
θ = The angle of launch of the projectile
g = The acceleration due to gravity ≈ 9.81 m/s²
Given that sin(50°) > sin(25°), when the angle of launch, θ, is increased from 25 degrees to 50 degrees, we have;
Let T₁ represent the time spent in the air when the angle of launch is 25°, and let T₂ represent the time spent in the air when the angle of launch is 50°, we have;
[tex]T_1 = \dfrac{2 \cdot u \cdot sin(25^{\circ}) }{g}[/tex]
[tex]T_2 = \dfrac{2 \cdot u \cdot sin(50^{\circ}) }{g}[/tex]
sin(50°) > sin(25°), therefore, we have;
[tex]\dfrac{2 \cdot u \cdot sin(50^{\circ}) }{g} > \dfrac{2 \cdot u \cdot sin(25^{\circ}) }{g}[/tex]
Therefore;
T₂ > T₁
Therefore, increasing the angle at which the projectile is launched from 25° to 50° will increase the total time spent in the air.
1. On planet Jupiter, the acceleration due to
gravity is about 26 m/s2. How high would a boy
be able to throw a ball on Jupiter if he can
throw it vertically 10m high on Earth?
Answer:
The boy can throw the ball to a height of 3.85 m on Jupiter
Explanation:
We'll begin by calculating the initial velocity at which the ball is thrown on EARTH. This can be obtained as follow:
On Earth:
Acceleration due to gravity (g) = 10 m/s²
Maximum height (h) = 10 m
Final velocity (v) = 0 m/s (at maximum height)
Initial velocity (u) =?
v² = u² – 2gh (since the ball is going against gravity)
0² = u² – 2 × 10 × 10
0 = u² – 200
Collect like terms
0 + 200 = u²
200 = u²
Take the square root of both side
u = √200 m/s
Finally, we shall determine the maximum height of the ball at JUPITER. This can be obtained as followb
On Jupiter:
Acceleration due to gravity (g) = 26 m/s²
Initial velocity (u) = √200 m/s
Final velocity (v) = 0 m/s (at maximum height)
Maximum height (h) =..?
v² = u² – 2gh (since the ball is going against gravity)
0² = (√200)² – 2 × 26 × h
0 = 200 – 52h
Collect like terms
0 – 200 = –52h
–200 = –52h
Divide both side by –52
h = –200 / –52
h = 3.85 m
Thus, the boy can throw the ball to a height of 3.85 m on Jupiter.
Define the unit of current. Name the device which is used to measure
electric current in a circuit.
Answer:
The ampere, symbol A, is the SI unit of electric current. It is defined by taking the fixed numerical value of the elementary charge e to be 1.602 176 634 x 10-19 when expressed in the unit C, which is equal to A s, where the second is defined in terms of ΔνCs.
the device used to measure current in a circuit is ammeter
Explain in detail why you cannot hear in space but you can see light(explanation includes particle movement of liquid, solids, gases, and plasma)
Answer:
The reason why one cannot hear in space but light can be seen is because light and sound are different kinds of wave
Light is an electromagnetic wave that propagates by a changing magnetic field hat creates a changing electric field. Light is created by a vibrating electric charge, and is transmitted through a medium by the absorption and reemission of the light by the medium particles
Sound is a longitudinal mechanical wave that is propagated by the vibration of the particles of the medium.
Sound requires a medium to propagate and it cannot be propagated or heard through space which is a vacuum.
Sound is created by a source that is vibrating and the vibration is transmitted to particles in the medium including solids, liquids, gases and plasma that the vibrating energy is in direct contact with and the transfer of the sound energy continues between layers of adjacent particles for the medium for the sound to be propagated from place to place
Explanation:
It takes 20 Newtons to move a box. How long will it take a 25 Watt motor to move this box 5 meters?
Answer:
With F = MA Its should take 500 Newtons
Explanation:
F = MA
can someone help me :)
Answer:
mass= 60kg
velocity= 10m/s
momentum = mass × velocity
p=m×v
p= 60×10
p= 600kgm/s
e Which of the following particles that may be emitted in radioactive decay is not ionising?
A alpha
B beta minus
C neutron
D beta plus
Explanation:
C. neutron.
it does not contain ionizing characteristics.
hope it helps. :)
Define Inertia.
___________✨
Answer:
a tendency to do nothing or to remain unchanged.
Explanation:
Answer:
Inertia: The resistance an object has to a change in its state of motion.
Explanation:
Hope it helps....
Have a great day!!
HELP!!
Differentiate between hertz and decibel.
Answer:
Explanation:Hertz is used to measure frequency, but decibel is used to measure intensity level.
1.what are barriers that you have encountered in dancing?
2.how do you think you can overcome them?
❤⭐❤⭐❤⭐❤
answer this ⭐
❤⭐❤⭐❤⭐❤
❤⭐❤⭐❤⭐❤
correct brainlies
wrong report
❤⭐❤⭐❤⭐❤⭐
thank you
❤⭐❤⭐❤⭐❤⭐
Answer:
heyy tell me ur yo u tube ch annel name I'll subscribe it and how many sub scriber u have friend
Explanation:
and are u from Ireland?
The body needs small amounts of ________ to help enzymes break down proteins.
Answer:
I would say vitamin B-6
Explanation:
it is also known as pyridoxine. it helps ebzymes break down protein and carry the dismantled amino acids to the blood stream
Hope this helps ✌✌
Answer:
The body needs small amount of vitamin B-6 to help enzymes break down protein and carry the dismantled amino acids to the blood stream.
A tiger leaps horizontally from a 6.5 m tall rock with a speed of 3.5 ms. How many seconds will it take for her to land?
Answer: 1.15 s
Explanation:
Given
Height of rock h=6.5 m
The horizontal speed of tiger u=3.5 m/s
In the vertical direction, there is no initial speed
Using the equation of motion
[tex]\Rightarrow h=ut+\frac{1}{2}at^2\\\\\Rightarrow 6.5=0+\frac{1}{2}\times 9.8\times t^2\\\\\Rightarrow t=\sqrt{\dfrac{13}{9.8}}=1.15\ s[/tex]
Time taken is 1.15 s
A object is placed between the focal point and the lens of a concave lens. Where will the image be formed?
Answer:
When object is placed between convex lens and focal point, image formed is virtual and magnified which is shown in the diagram. Was this answer helpful?
A sound wave is propagating through the air from left to right as shown in the diagram below.
Answer:
Explanation: Pules
Answer: longitudinal (compression)
Explanation:
Help me solve this please
Hey there!
Based on the info this planet is likely to be located near the sun. If you would like to be exact it would be between Mercury and Venus. This is because it’s orbital period is half a year, Venus is about 3/4 of a year, and Mercury is about 1/3 of a year. Hopefully this helps! Good luck!
Some people say that you can contract HIV by sharing a drink with someone who has HIV. True or false? Why?
Answer: This is definitely false... you have to.. have séx with someone who has H.I.V to actually get H.I.V
Which of the following combinations would result in the least acceleration?
O SN and 0.35 kg
60N and 2.0 kg
O 12N and 1.0 kg
O IN and 0.20 kg
9- When the moon comes in an orbit higher from earth, ......... solar eclipse are formed.
a) total
b) annular
c) partial. d) annular and partial
PLZ HELP ME ASAP!!! 50 POINTS IF CORRECT! AND BRAINLEST
Answer:
B and C is the Answer
Follow me please
Mark brainliest
A + 32.2 μC charge feels a 0.544 N force from a + 12.3p μC charge. How far apart are they? (u stands for micro.) [?] m
Answer:
r = 2.55 m
Explanation:
Given that,
First charge, q₁ = 32.2 μC
Second charge, q₂ = + 12.3 μC
The force between charges, F = 0.544 N
We need to find the distance between charges. The force between two charges is given by the formula as follows :
[tex]F=k\dfrac{q_1q_2}{r^2}\\\\r=\sqrt{\dfrac{kq_1q_2}{F}} \\\\r=\sqrt{\dfrac{9\times 10^9\times 32.2\times 10^{-6}\times 12.3\times 10^{-6}}{0.544}} \\\\r=2.55\ m[/tex]
So, the charges are 2.55 m apart.
Answer:
2.55
Explanation:
Right on Acellus
Give the other guy brainliest
You can only give brainliest if 2 people answer
10 Waves Question 2 of 10 A wave travels at a speed of 74 m/s. If the distance between crests is 12 m, what is the frequency of the wave? Use j A. 0.16 Hz B. 6.2 Hz C. 890 Hz D. 62 Hz SUBMIT
Answer: B 6.2 Hz
Explanation: Equation for waves v = λf.
Frequency = speed / wavelength f = v/λ
f = 74 m/s / 12 m = 6.166... Hz
Answer:
Rounding is necessary: the answer is 6.2 Hz
Explanation:
A lawn mower is pushed with a force of 79 N. If 11,099 J of work are done on mowing the lawn, what is the total distance the lawn mower was pushed? Round your answer to a whole number (no decimal places).
Answer:
141m
Explanation:
An object of mass 1.5 kg is moving forwards along the floor against an applied force of
40.0 N [backwards]. If the coefficient of kinetic friction is 0.25, determine the
acceleration of the object.
Answer:
The acceleration of the object is -29.12 m/s².
Explanation:
The acceleration of the object can be calculated by Newton's second law:
[tex] \Sigma F = ma [/tex]
[tex] - F - F_{\mu} = ma [/tex]
[tex] - F - \mu mg = ma [/tex]
Where:
F: is the applied force = 40.0 N
μ: is the coefficient of kinetic friction = 0.25
m: is the mass of the object = 1.5 kg
g: is the acceleration due to gravity = 9.81 m/s²
a: is the acceleration =?
[tex] a = \frac{- F - \mu mg}{m} = \frac{-40.0 N - 0.25*1.5 kg*9.81 m/s^{2}}{1.5 kg} = -29.12 m/s^{2} [/tex]
The minus sign is because means that the object is decelerating due to the applied force and the friction.
Therefore, the acceleration of the object is -29.12 m/s².
I hope it helps you!