Answer:
Gas pressure is measured in units such as torr, mmHg, atm, and Pa. ... You can see mass is small, Volume is large. - hense a small ... The pressure increases if volume decreases. ... For each of the following changes of the initial balloon, select ... A sample of nitrogen (N2) has a volume of 60.0 L at a pressure of 725 mmHg.
Explanation:
SHOW ALL WORK AND INCLUDE UNITS
How much heat is required to raise the temperature of 10.0 g of iron from 25°C to 100.°C? The specific heat capacity of iron is 0.46 J/g°C.
Answer:
345J
Explanation:
-mass of iron (m) = 10.0 g
-temperature (ΔT) = final temperature- initial temperature= 100-25= 75 degree Celsius
-Specific Heat capacity of iron (c)= 0.46J/g°C.
Heat (Q)=?
Solution:
Formula for Heat is :
Q=m x c x ΔT
Q= 10 x 0.46 x 75
Q= 345 J.
so, 345 joules of heat are needed to increase the temperature of 10 grams of iron.
From the above formula, all other questions can easily be solved from the same procedure.
345 joules of heat is required to raise the temperature of 10.0 g of iron from 25°C to 100°C.
How we calculate the required heat in any reaction?Required heat of any reaction can be calculated as:
Q = m x c x ΔT, where
In the question given that:
m = mass of iron = 10g
c = specific heat capacity of iron = 0.46J/g°C
ΔT = change in temperature = final temperature- initial temperature= 100-25= 75 degree Celsius
Now putting all these values in the above equation, we get
Q= 10g x 0.46J/g°C x 75°C = 345J
Hence, 345 joules of heat is required.
To know more about required heat of a reaction, visit the below link:
https://brainly.com/question/878982
It’s cold outside and you decide to cook some pasta. As you boil the noodles, the kitchen window begins to fog up. Which processes are at work here?
boiling and freezing
vaporization and condensation
evaporation and thawing
condensation and evaporation
Answer:
condensation and evaporation
Explanation:
condensation forms when warm humid air contacts cold surface. during cold months.
why cant acid anhydrides(oxides) react with acids?
Answer:
Acidic oxides, or acid anhydride, are oxides that react with water to form an acid, or with a base to form a salt. They are oxides of either nonmetals or of metals in high oxidation states.
Explanation:
Write the net ionic equation of HNO3+Fe--> Fe(HNO3)2 +H2
Answer:
nitric acid + iron=iron+[nitric acid ] 2 hydrogen
The net ionic equation will be Fe → [tex]Fe^{2+}[/tex].
What is net ionic equation?The net ionic equation would be a chemical equation which only indicates the elements, compounds, as well as ions instantly involved in a chemical reaction.
The given chemical equation is:
HNO3+Fe → Fe(HNO3)2 +H2
It can be written in term of ionic equation.
[tex]H^{+}[/tex] + [tex]NO_{3}^{-}[/tex]+Fe → [tex]Fe^{2+}[/tex] + [tex]H^{+}[/tex] + [tex]NO_{3}^{-}[/tex]
Hydrogen ion and nitrate ion will be canceled each other.
Hence, the net ionic equation will be
Fe → [tex]Fe^{2+}[/tex]
To know more about net ionic equation.
https://brainly.com/question/22885959
#SPJ2
Molarity and Dilution
How many moles are needed in a 100. mL solution of a 0.10M CuSO4 5H2O solution?
Answer: The moles needed are 0.01.
Explanation:
Molarity of a solution is defined as the number of moles of solute dissolved per liter of the solution.
[tex]Molarity=\frac{n\times 1000}{V_s}[/tex]
where,
n = moles of solute [tex](CuSO_4.5H_2O)[/tex] = ?
[tex]V_s[/tex] = volume of solution in ml
Now put all the given values in the formula of molarity, we get
[tex]0.10=\frac{n\times 1000}{100}[/tex]
[tex]n=\frac{0.10\times 100}{1000}=0.01[/tex]
Therefore, the moles needed are 0.01.
As a human being, we are considered to be a ..... because we rely on other organism for food
Answer:
As a human being, we are considered to be a heterotroph because we rely on other organisms for food.
what is the wave speed if the wave length is 8 and the frequency is 20
Answer:
160m/s
Explanation:
To find V Use the following formula V= F*W
V= Velocity F= Frequency W= Wavelength
V=20*8
=160m/s
What medium do selsmic waves travel through?
A
The alr
B
The ground
C
Water
D
Outer space
For the reaction
C2H2(g) + 3 O2(g) – 2 CO2(g) + 2 H2O(g)
What number of grams of CO2 could be produced from 2.0 g of C2H4 and 5.0 g of O2?
Answer:
3.3792 g
Explanation:
The balanced equation for the reaction is given as;
2 C2H2(g) + 3 O2(g) --> 2 CO2(g) + 2 H2O(g)
From the reaction;
2 mol of C2H2 requires 3 mol of O2
2.0 g of C2H2
Number of moles = Mass / Molar mass = 2 / 26.04 = 0.07680 mol
5.0 g of O2
Number of moles = Mass / Molar mass = 5 / 32 = 0.15625 mol
The limiting reactant is; C2H2
2 mol of C2H2 produces 2 mol of CO2
0.07680 mol produces x
Solving for x;
x = 0.07680 mol
Mass = Molar mass * Number of moles = 44 g/mol * 0.07680 mol = 3.3792 g
someone help ,, I'll give brainliest lolll .
Answer:
toxic substances to humans
Explanation:
Answer:
Toxic substance to humans
Explanation:
Lead is a naturally occurring element found in small amounts in the earth’s crust. While it has some beneficial uses, it can be toxic to humans and animals, causing health effects.
Which of the following is a characteristic of a scientific theory
1. It explains how nature works.
2. It is based on a single experiment.
3. It should not be possible to replicate its results.
4. It should not be possible to replicate its observations.
NEED URGENT!!!!!
Answer:
number one
Explanation:
hope I helped
Acidified water is electrolysed by using carbon electrodes. What is produced
at Negative carbon electrode
Answer:
Hydrogen gas
Explanation:
During electrolysis of acidified water, H+ ions are reduced to H2 gas at the negative carbon electrode (cathode) and hence hydrogen gas is liberated at cathode.
What is the identity of the element that has 19 protons and 22 neutrons?
Answer:
A titanium ion
define acidic salt with example
Answer:
[tex] \color{magenta} \huge{ \boxed{answer}}[/tex]
Acidic SaltAcid salts are a class of salts that produce an acidic solution after being dissolved in a solvent. Its formation as a substance has a greater electrical conductivity than that of the pure solvent. An acidic solution formed by acid salt is made during partial neutralization of diprotic or polyprotic acids.
hopefully help:)
Explanation:
✨use #CarryOnLearning to help our medical frontliners✨
#CarryOnLearningWhat element should I do a project on?
Answer:
Project scope statement?
Explanation:
it's good one just do research on it
Earthquakes are common at ocean-continent convergence zones but not ocean-ocean convergence zones. TRUE FALSE Check it
Answer:
FALSE
Explanation:
The earthquakes are common in both types of convergences is oceanic and continental and ocean to oceanic convergence. As the process of subduction takes places at the oceanic - oceanic boundary and resultant plate slide down other plate leading to recycling of the crust, volcanic eruptions and this leads to the formation of a volcanic arc, trenches, and faults.Can someone help me please?
Answer:
SUN
Explanation:
Hope this helps! Plz mark as brainliest!
can someone help ill give 30 extra points if its right
Answer:
sweating
Explanation:
why do I need 20 words
What is a catalyst and why is it used in chemical reactions?
Answer:
A catalyst is a substance that can be added to a reaction to speed up the process without being absorbed by it. Catalysts usually work by lowering the activation energy or modifying the mechanism of a reaction. Proteins that act as catalysts in biochemical reactions are known as enzymes.
Explanation:
PLEASE HELP ME EASY
List three household products that should go to a secure landfill site instead of regular sanitary landfill.
Answer:
plastic, glass, and electronics
Explanation:
those take longer to erode than normal trash.
5. What kind of model is represented in the image below?"
A. mathematical
B. physical
C. virtual
Answer:
virtual
Explanation:
because we cannot touch or sense it
What is the symbol for entropy? S ΔH H ΔS
Answer:
S
Explanation:
The symbol for entropy is S, and a change in entropy is shown as “delta” S or ΔS. If the entropy of a system increases, ΔS is positive. If the entropy of a system decreases, ΔS is negative.
GIVING BRAINLIEST AND THE REST OF MY POINTS!!!!! :D
A scientist made the following table showing the number of eggs laid by two different salmon. Based on this data, which fish has the best chance of their offspring surviving, and what type of adaptation is this?
A) Salmon #1, life cycle adaptation
B) Salmon #1, physical adaptation
C) Salmon #2, life cycle adaptation
D) Salmon #2, behavioral adaptation
Answer:
C
Explanation:I got it correct on a quiz I did that had this question
why is it necessary to specify temperature when giving Ka value
Answer:
Because the equilibrium constant is only at constant at temperature. Changing the temperature changes the Ka.
Which of the following best support the claim that the cycling of matter and energy in Earth's interior affects
Earth's surface? Select all correct answers!!!!
A)Tectonic plates move together, apart, and past each other.
B)Lava can be observed rising to Earth's surface in some places.
C)The Earth's crust is much cooler than the Earth's interior.
D)The Earth's inner core is composed mostly of solid iron.
Answer:
am not sure but I think it c
Answer:
it’s A and B and the last one I still am trying to figure out.
Explanation:
Mikala pours a tablespoon of salt into a beaker of water. Diffusion will cause the salt molecules to dissolve in the molecules of water. How could Mikala increase the diffusion rate of the salt molecules?
A. Mikala could remove all sources of light from the beaker.
B. Mikala could slowly pour more water into the beaker.
C. Mikala could decrease the temperature of the solution.
D. Mikala could increase the temperature of the solution.
Calculate the pH after 0.10 mol of NaOH is added to 1.0 L of a solution that is 0.40 M CH3NH2 and 0.80 M CH3NH3Cl. WebAssign will check your answer for the correct number of significant figures. Calculate the pH after 0.10 mol of HCl is added to 1.0 L of a solution that is 0.40 M CH3NH2 and 0.80 M CH3NH3Cl. WebAssign will check your answer for the correct number of significant figures.
Answer:
E
Explanation:
Which of the following describes an exothermic reaction?
An exothermic reaction is described by ΔH(reactants) is greater than ΔH( products) and the correct option is option A.
What is Exothermic reaction?The word exothermic means “releasing heat.” Energy, often in the form of heat, is released as an exothermic reaction proceeds.
Enthalpy of a reaction is defined as the heat energy change (Δ H) that takes place when reactants go to products. If heat is absorbed during the reaction, Δ H is positive; if heat is released, then Δ H is negative.
ΔH value negative –> energy released –> exothermic reaction
ΔH value positive –> energy absorbed –> endothermic reaction
Therefore, an exothermic reaction is described by ΔH(reactants) is greater than ΔH( products) and the correct option is option A.
Learn more about Exothermic reactions, here:
https://brainly.com/question/10373907
#SPJ1
How many moles of a gas are in a 2.2-liter balloon at 600 mmHg and 85 C. Also asks to identify the P, V, N, R, and T. If unknown then put "?"
We have that for the Question "How many moles of a gas are in a 2.2-liter balloon at 600 mmHg and 85 C." it can be said that Moles of gas is
n= 0.059 moles of gas
From the question we are told
How many moles of a gas are in a 2.2-liter balloon at 600 mmHg and 85 C. Also asks to identify the P, V, N, R, and T. If unknown then put "?"
Generally the equation for the is mathematically given as
[tex]P=\frac{600}{760}\\\\P=0.789atm[/tex]
Therefore
[tex]n=\frac{PV}{RT}\\\\Therefore\\\\n=\frac{PV}{RT}\\\\n=\frac{0.789*2.2}{0.08206*(85 + 273)}\\\\[/tex]
n= 0.059 moles of gas
Therefore
Moles of gas is
n= 0.059 moles of gas
For more information on this visit
https://brainly.com/question/23379286
Variables – this experiment tests how the temperature of water affects the time it takes for antacid tablets to dissolve. (they drop an antacid in hot water and one in cold water)
• What is the independent variable? (2 points)
• What is the dependent variable? (2 points)
Explanation:
You can think of independent and dependent variables in terms of cause and effect: an independent variable is the variable you think is the cause, while a dependent variable is the effect. In an experiment, you manipulate the independent variable and measure the outcome in the dependent variable.