By applying Charles law, the final volume of the gas is equal to 42 mL.
Given the following data:
Initial volume = 140 mLInitial temperature = 400 KFinal temperature = 120 KTo find the final volume of the gas, we would apply Charles law:
Charles law states that when the pressure of an ideal gas is kept constant, the volume of the gas is indirectly proportional to the absolute temperature of the gas.
Mathematically, Charles law is given by the formula;
[tex]\frac{V}{T} =k\\\\\frac{V_1}{T_1} = \frac{V_2}{T_2}[/tex]
Where;
T is the temperature of an ideal gas.V is the volume of an ideal gas.Substituting the given parameters into the formula, we have;
[tex]\frac{140}{400} = \frac{V_2}{120} \\\\140 \times 120 = 400V_2\\\\16800 = 400V_2\\\\V_2 = \frac{16800}{400}[/tex]
Final volume = 42 mL.
Read more on Charles law: https://brainly.com/question/22971882
Please count compound list each element and the amount of each and then figure out the total of the atoms
NEED ANSWER ASAP
Answer:
Carbon: 18, Hydrogen: 16, Oxygen: 8
Explanation:
Total # of atoms = 42
Organic
2. For each of the six elements aluminium (Al), boron (B), nitrogen (N), oxygen (O) phosphorus (P), sulfur (S), write down:
a. the period of the periodic table to which it belongs.
b. its group number in the periodic table.
c. its proton number (atomic number).
d. the number of electrons in one atom.
e. its electronic configuration.
f. the number of outer-shell electrons in one atom.
g. Which of the above elements would you expect to have similar properties?
Elements in the same group of the periodic table tend to have similar chemical properties
What is the periodic table?For Al;
a. Period: Period 3
b. Group: Group 13
c. Proton Number (Atomic Number): 13
d. Number of Electrons: 13
e. Electronic Configuration: 1s² 2s² 2p⁶ 3s² 3p¹
f. Number of Outer-Shell Electrons: 3
g. Similar Properties: Boron (B)
For Boron (B):
a. Period: Period 2
b. Group: Group 13
c. Proton Number (Atomic Number): 5
d. Number of Electrons: 5
e. Electronic Configuration: 1s² 2s² 2p¹
f. Number of Outer-Shell Electrons: 3
g. Similar Properties: Aluminium (Al)
For Nitrogen (N):
a. Period: Period 2
b. Group: Group 15
c. Proton Number (Atomic Number): 7
d. Number of Electrons: 7
e. Electronic Configuration: 1s² 2s² 2p³
f. Number of Outer-Shell Electrons: 5
g. Similar Properties: Phosphorus (P)
For Oxygen (O):
a. Period: Period 2
b. Group: Group 16
c. Proton Number (Atomic Number): 8
d. Number of Electrons: 8
e. Electronic Configuration: 1s² 2s² 2p⁴
f. Number of Outer-Shell Electrons: 6
g. Similar Properties: Sulfur (S)
For Phosphorus (P):
a. Period: Period 3
b. Group: Group 15
c. Proton Number (Atomic Number): 15
d. Number of Electrons: 15
e. Electronic Configuration: 1s² 2s² 2p⁶ 3s² 3p³
f. Number of Outer-Shell Electrons: 5
g. Similar Properties: Nitrogen (N)
For Sulfur (S):
a. Period: Period 3
b. Group: Group 16
c. Proton Number (Atomic Number): 16
d. Number of Electrons: 16
e. Electronic Configuration: 1s² 2s² 2p⁶ 3s² 3p⁴
f. Number of Outer-Shell Electrons: 6
g. Similar Properties: Oxygen (O)
Learn more about periodic table:https://brainly.com/question/31672126
#SPJ2
8. In an ionic bond, electrons are
electrons are
while in a covalent bond,
?
Answer:
in covalent bond electrons are shared by atoms
The secondary structures shown in the protein are Question 12 options: A) α-helices and ß-pleated sheets. B) ß-pleated sheets. C) globular structures. D) α-helices.
Answer:
A. a- helixes and B-pleated sheats
Explanation:
A helical (a-helix) or flattened sheets (B-pleated sheet) like structures are established between opposite charge bearing groups of different amino acids are called Secondary Structures.
What is the molarity of a NaOH solution if 48.0 mL of a 0.220 M H2SO4 solution is required to neutralize a 25.0-mL sample of the NaOH solution?
Answer:
Molarity NaOH = 0.85M (2 sig figs)
Explanation:
48.0ml(0.220M H₂SO₄) + 25ml(Xmolar NaOH)H₂SO₄ + 2NaOH => Na₂SO₄ + 2H₂O
2(molarity x volume) H₂SO₄ = (molarity x volume) NaOH
2(0.220M x 48.0ml) = 25.0ml x Molarity NaOH
Molarity NaOH = 2(0.220M x 48.0ml)/25.0ml = 0.8448M ≅ 0.85M (2 sig figs)
which ionization process requires the most energy?
Answer:
the second ionization energy
Explanation:
The second ionization energy is always larger than the first ionization energy, because it requires even more energy to remove an electron from a cation than it is from a neutral atom.
How does calculating the kinetic energy of an object at different velocities help understand the relationship between kinetic energy and velocity?
Answer:
Kinetic energy depends on the velocity of the object squared
Explanation:
Kinetic energy depends on the velocity of the object squared. This means that when the velocity of an object doubles, its kinetic energy quadruples. ... Kinetic energy must always be either zero or a positive value. While velocity can have a positive or negative value, velocity squared is always positive.
If two trucks are moving at the same speed, but truck A has a mass of 3,000 kg, and truck B has a mass of 4,500 kg, what statement is true?
Question 3 options:
Truck A has greater kinetic energy.
Truck A will have a greater stopping distance.
Truck B will have a greater stopping distance.
Truck B has less kinetic energy.
Answer:
C, Truck B will have a greater stopping distance. Took the test got it right.
Explanation:
Answer:
the answer is c
Explanation: the truck with less kg means that it will be more likely to stop fast but if you have a high kg it will slide till it stops thus the answer is c
What enzyme catalyzes the conversion of carbon dioxide and water to carbonic acid, and where is this enzyme located
Answer:
Carbonic anhydrase and they are located in renal tubules.
Explanation:
NaC2H3O2 HOH --> HC2H3O2 NaOH Since the two products are a weak acid and a strong base, we expect this mixture to be basic. When NaF reacts with water in the same manner, the products would be NaOH and _______.
The products of the reaction would be NaOH and HF
From the question,
We are to determine the products of the reaction between NaF and water in the same manner as the given reaction.
To determine the other product, we will write the equation for the reaction
The equation for the reaction is
NaF + H₂O → NaOH + HF
Hence, the products of the reaction would be NaOH and HF.
Learn more here: https://brainly.com/question/14276012
as liquid or gases heat up, they ___________. Then as they___________ they fall, thus As liquid or gases heat up, they driving the motion the of convection.
A: Fall, Heat
B: Bubble, Overflow
C: Create Heat, Burn
D: Rise, Cool
Help please its okay if not <3
Answer:
so sorry but I need to randomly answer 2 questions
The density of gold is 19. 3 g/cm3. What is the volume of a 13 g gold nugget? (Density: D = ). 25 cm3. 67 cm3 1. 48 cm3 2. 50 cm3.
Answer:
0.67 cm³Explanation:
The volume of a substance when given the density and mass can be found by using the formula
[tex]volume = \frac{mass}{density} \\[/tex]
From the question
mass = 13 g
density = 19.3 g/cm³
We have
[tex]volume = \frac{13}{19.3} \\ = 0.673575...[/tex]
We have the final answer as
0.67 cm³Hope this helps you
Please help! Its due now!
Answer:
PARTICLES!
I hope I was on time! Cheers! :^)
How many grams of sodium hydroxide are present in 250.0 mL of a 0.300 M NaOH solution?
explain why heating a solution increases the solubility of a solute
[tex] \: \: \: \: \: [/tex]
The addition of more heat facilitates the dissolving reaction by providing energy to break bonds in the solid. This is the most common situation where an increase in temperature produces an increase in solubility for solids.hope it helps[tex] \: \: \: \: \: \: [/tex]
Question 1 (5 points)
(04.01 LC)
Based on the law of conservation of mass, which of the following statements is correct? (5 points)
a
Matter is neither created nor destroyed.
b
Matter can be created but it cannot be destroyed.
The total mass of substances before a reaction is less than the total mass after a reaction.
The total mass of substances before a reaction is greater than the total mass after a reaction.
Matter is neither created nor destroyed. Therefor, option (A) is correct.
What is The Law of Conservation of Mass?The Law of Conservation of Mass is a fundamental principle in science that states that matter cannot be created or destroyed in a chemical reaction, only transformed from one form to another. This means that the total mass of the reactants in a chemical reaction must be equal to the total mass of the products.
The Law of Conservation of Mass was first introduced by Antoine Lavoisier, a French chemist, in the 18th century. The law has been extensively tested and verified through numerous experiments in the field of chemistry. It is an essential concept for understanding the behavior of matter in chemical reactions and for the development of technologies that depend on chemical reactions, such as energy production, medicine, and materials science.
Learn more about The Law of Conservation of Mass, here:
https://brainly.com/question/28711001
#SPJ2
which of the following is most acidic oxide?
a.Na2O
b.Al2O3
c.P2O5
d.SO3
And why it is most acidic oxide?
-i effect required here
Let's see which oxide shows more -i effect
Na-Group 1 Al-Group 15P-Group 15S -Group 16P lies below Al
And -i effect increases down the group so acidity increases
P_2O_5 is more acidicConsider the following chemical reaction.
3 Zn(C₂H₃O₂)₂(aq) + 2 Na₃PO₄(aq) → 6 NaC₂H₃O₂(aq) + Zn₃(PO₄)₂(s)
A chemist makes a solution of zinc acetate by dissolving 20.5 g Zn(C₂H₃O₂)₂ in 105 mL H₂O. What is the concentration of this zinc acetate solution?
The concentration of the zinc acetate, Zn(C₂H₃O₂) solution is 1.067 M
We'll begin by calculating the number of mole in 20.5 g of Zn(C₂H₃O₂)₂Mass of Zn(C₂H₃O₂)₂ = 20.5 g
Molar mass of Zn(C₂H₃O₂)₂ = 65 + 2[(12×2) + (3×1) + (16×2)]
= 65 + 2[59]
= 183 g/mol
Mole of Zn(C₂H₃O₂)₂ =?Mole = mass / molar mass
Mole of Zn(C₂H₃O₂)₂ = 20.5 / 183
Mole of Zn(C₂H₃O₂)₂ = 0.112 mole Finally, we shall determine concentration of Zn(C₂H₃O₂). This can be obtained as follow:Mole of Zn(C₂H₃O₂)₂ = 0.112 mole
Volume = 105 mL = 105 / 1000 = 0.105 L
Concentration of Zn(C₂H₃O₂)₂ =?Concentration = mole / Volume
Concentration of Zn(C₂H₃O₂)₂ = 0.112 / 0.105
Concentration of Zn(C₂H₃O₂)₂ = 1.067 MTherefore, the concentration of the zinc acetate, Zn(C₂H₃O₂) solution is 1.067 M
Learn more: https://brainly.com/question/25511880
In your own words, what is the conservation of mass?
Answer:
In chemistry, the law of conservation of mass states that the mass of the products (the chemical substances created by a chemical reaction) will always equal the mass of the reactants (the substances that make the chemical reaction). Think of it as being similar to balancing an algebraic equation.
Explanation:
(winks and runs off)
Answer:
Mass cannot be created or destroyed.
Explanation:
Conservation of mass is "a principle stating that mass cannot be created or destroyed" (Oxford Languages).
Have a nice day! (there is not much rewording/etc you can do here as it is a simple principle, but I hope this will still help!)
I hope this is what you are looking for, but if not - comment! I will edit and update my answer accordingly. (ノ^∇^)
- Heather
Help Help Help Help Help Help Help Help Help Help Help Help Help Help Help Help Help Help Help Help Help Help
What is the density of a 36 g object with a volume of 15 cm3? (Density: D = ) 0. 42 g/cm3 0. 54 g/cm3 2. 4 g/cm3 5. 4 g/cm3.
Answer:
2.4 g/cm3 is the correct answer.
Explanation:
Hope this helps
What is Art Conservation?
Answer:
The conservation and restoration of cultural property focuses on protection and care of cultural property, including artworks, architecture, archaeology, and museum collections. Conservation activities include preventive conservation, examination, documentation, research, treatment, and education
Explanation:
this is the correct answer
A sample of damp air in a 1.00 L container exerts a total pressure of 741.0 torr at 20 oC; but when it is cooled to -10 oC, the water vapor freezes to ice with neglegible pressure giving a pressure of 607.1 torr. How many molecules of water were present in the gas
From the information presented in the question, the number of molecules present of water present is obtained 2.41 × 10^21 molecules.
From the information we have;
Volume of the damp air = 1 L
Pressure of the damp air = 741.0 torr or 0.975 atm
Temperature of the gas = 20 oC + 273 = 293 K
R = 0.082 atm LK-1mol-1
Number of moles = ?
n =PV/RT
n = 0.975 × 1/0.082 × 293
n = 0.041 moles
Volume of water vapor = 1 L
Temperature of water = -10 oC + 273 = 263 K
Pressure of the gas = 607.1 torr or 0.799 atm
R = 0.082 atm LK-1mol-1
n= PV/RT
n = 0.799 × 1/ 0.082 × 263
n = 0.037 moles
Number of moles of water = 0.041 moles - 0.037 moles = 0.004 moles
If 1 mole = 6.02 × 10^23 molecules
0.004 moles = 0.004 moles × 6.02 × 10^23 molecules/1 mole
= 2.41 × 10^21 molecules
Learn more: https://brainly.com/question/2510654
What happens when potassium forms an ion?
Answer:
It loses an electron and has an octet in the next-lowest energy level
Explanation:
please help for a brainlist
Answer:
Is D
Explanation:
hope this is helpful
A doctor who specializes in treating diseases of nervous system
neurologist
nephrologist
ophthalmologist
cardiologist
what is the function of the lungs
Answer:
the lungs are part of the respiratory system
Explanation:
Allows you to talk and to smell
Oxygen to the cells in your body
and helps you breathe
Answer:
Your lungs are part of the respiratory system, a group of organs and tissues that work together to help you breathe. The respiratory system's main job is to move fresh air into your body while removing waste gases.
Explanation:
Main functions of the lungs : -
Inhalation and Exhalation Are Pulmonary Ventilation - That’s Breathing External Respiration Exchanges Gases Between the Lungs and the Bloodstream.Internal Respiration Exchanges Gases Between the Bloodstream and Body TissuesAir Vibrating the Vocal Cords Creates SoundOlfaction, or Smelling, Is a Chemical Sensation\huge\blue{\boxed{\tt{\colorbox{black}{NEED HELP}}}}[[
this is the text code sir
Answer:
okay?
Explanation:
Answer:
[tex]\huge\blue{\boxed{\tt{\colorbox{black}{babyheaven}}}}[/tex]
Which of these metric prefixes represent 1000?
(A). Centi
(B). Ecto
(C). Kilo
(D). Milli
When reactants are not used to make new substances, are they destroyed?
In a chemical reaction, only the atoms present in the reactants can end up in the products. No new atoms are created, and no atoms are destroyed. In a chemical reaction, reactants contact each other, bonds between atoms in the reactants are broken, and atoms rearrange and form new bonds to make the products.