Answer:
k = 5406.88 N/m
Explanation:
Since the initial and final temperatures are constant while the gas expands, the expansion of the gas obeys Boyle's law
Initial gas pressure, [tex]P_1 = 2.29 * 10^5 Pa[/tex]
Let the initial gas volume [tex]V_1[/tex] = V
Volume = Length * Area
Since the cross sectional area does not change and the length of the gas-filled chamber is said to double, then the volume also doubles.
[tex]V_2 = 2V[/tex]
The final gas pressure, [tex]P_2[/tex] will be gotten from the Boyle's law equation
[tex]P_1 V_1 = P_2 V_2\\P_2 = \frac{P_1 V_1}{V_2} \\P_2 = \frac{2.29*10^5 * V}{2V}\\P_2 = \frac{2.29*10^5 }{2}\\P_2 = 1.145 *10^5 Pa[/tex]
The Cross Sectional Area, [tex]A = \pi R^2[/tex]
R = 5.33 cm = 0.0533 m
[tex]A = \pi * 0.0533^2[/tex] = 0.0089 m²
The force exerted on the piston, F = P₂ A
F = 1.145 * 10⁵ * 0.0089
F = 1021.9 N
To get the spring constant, use Hooke's law
F = k Δx
Where Δx = l₂ - l₁
Δx = 2l - l = l ( since the length of the chamber doubles on expansion)
Δx = 18.9 cm = 0.189 m
F = k Δx
1021.9 = k * 0.189
k = 1021.9/0.189
k = 5406.88 N/m
Following are the calculation of the compression of the spring:
Since gas expands isothermally (at the same temperature), the gas formula
[tex]P_1V_1 = P_2 V_2[/tex]
During expansion, the length of the channel doubles. since the area of the cylinder's cross-section is the same,
so
[tex]V_2 = 2V_1\\\\P_2 = \frac{P_1V_1}{V_2} =\frac{P_1}{2} = 2.29 \times 10^5 \ Pa[/tex]
eventually, force is exerted by crosssection piston [tex]= P_2 \times area[/tex]
[tex]F = 2.29 \times 10^{\frac{5}{2}} \times \pi \times r^2[/tex]
[tex]= [2.29 \times 10^{\frac{5}{2}} ]\times 3.14\times (0.0533)^2\\\\ = 724.16 \times 3.14 \times 0.00284089\\\\ = 6.45 \ Newton\\\\[/tex]
Force compresses the spring:
[tex]|F| = k \times x \ \ \ \ \ \ \ \ \ for\ \ spring\\\\[/tex]
(where, [tex]x = 18.9 \ cm = 0.189\ m[/tex], as length doubled by compression to unstrained position)
[tex]k = \frac{6.45}{ 0.189} = 34.12\ \frac{ N}{meter}[/tex]
Learn more:
brainly.com/question/25118887
Underline your answer for each situation: If you advance the movie one frame, the knot at point A would be a) in the same place b) higher c) lower d) to the right e) to the left If the person generates a new pulse like the first but more quickly, the pulse would be a) same size b) wider c) narrower If the person generates another pulse like the first but he moves his hand further, the pulse would be a) same size b) taller c) shorter If the person generates another pulse like the first but the rope is tightened, the pulse will move a) at the same rate b) faster c) slower Now the person moves his hand back and forth several times to produce several waves. You freeze the movie and get this snapshot. Underline your answer for each situation: If you advance the movie one frame, the knot at point A would be a) in the same place b) higher c) lower d) to the right e) to the left If you advance the movie one frame, the pattern of the waves will be _________relative to the hand. a) in the same place b) shifted right c) shifted left d) shifted up e) shifted down If the person starts over and moves his hand more quickly, the peaks of the waves will be a) the same distance apart b) further apart c) closer together If you lower the frequency of a wave on a string you will lower its speed. b) increase its wavelength. c). lower its amplitude. d) shorten its period.
Answer:
a) correct answer is b higher , b) correct answer is b higher , c) correct answer is b faster , d) traveling wave , e)
Explanation:
A traveling wave is described by the expression
y = A sin (kx - wt)
where k is the wave vector and w is the angular velocity
let's examine every situation presented
a) a new faster pulse is generated
A faster pulse should have a higher angular velocity
equal speed is related to the period and frequency
w = 2π f = 2π / T
therefore in this case the period must decrease so that the angular velocity increases
the correct answer is c narrower
b) Generate a pulse, but move your hand more.
Moving the hand increases the amplitude (A) of the pulse
the correct answer is b higher
c) generates a pulse but the force is tightened
Set means that more tension force is applied to the string, so the velicate changes
v = √ (T /μ)
the correct answer is b faster
d) move your hand back and forth
in this case you would see a pulse series whose sum corresponds to a traveling wave
e) Advance a frame the movie
in this case the wave will be displaced a whole period to the right
the correct answer is b
f) move your hand faster
the waves will have a maximum fast, so they are closer
answer C
g) decrease wave frequency
Since the speed of the wave is a constant m ak, decreasing the frequency must increase the wavelength to keep the velocity constant.
the correct answer is b increases its wavelength
An unknown charged particle passes without deflection through crossed electric and magnetic fields of strengths 187,500 V/m and 0.1250 T, respectively. The particle passes out of the electric field, but the magnetic field continues, and the particle makes a semicircle of diameter 25.05 cm.
Part A. What is the particle's charge-to-mass ratio?
Part B. Can you identify the particle?
a. can't identify
b. proton
c. electron
d. neutron
Answer:
Explanation:
Given that
The electric fields of strengths E = 187,500 V/m and
and The magnetic fields of strengths B = 0.1250 T
The diameter d is 25.05 cm which is converted to 0.2505m
The radius is (d/2)
= 0.2505m / 2 = 0.12525m
The given formula to find the magnetic force is [tex]F_{ma}=BqV---(i)[/tex]
The given formula to find the electric force is [tex]F_{el}=qE---(ii)[/tex]
The velocity of electric field and magnetic field is said to be perpendicular
Electric field is equal to magnectic field
Equate equation (i) and equation (ii)
[tex]Bqv=qE\\\\v=\frac{E}{B}[/tex]
[tex]v=\frac{187500}{0.125} \\\\v=15\times10^5m/s[/tex]
It is said that the particles moves in semi circle, so we are going to consider using centripetal force
[tex]F_{ce}=\frac{mv^2}{r}---(iii)[/tex]
magnectic field is equal to centripetal force
Lets equate equation (i) and (iii)
[tex]Bqr=\frac{mv^2}{r} \\\\\frac{q}{m}=\frac{v}{Br} \\\\\frac{q}{m} =\frac{15\times 10^5}{0.125\times0.12525} \\\\=\frac{15\times10^5}{0.015656} \\\\=95808383.23\\\\=958.1\times10^5C/kg[/tex]
Therefore, the particle's charge-to-mass ratio is [tex]958.1\times10^5C/kg[/tex]
b)
To identify the particle
Then 1/ 958.1 × 10⁵ C/kg
The charge to mass ratio is very close to that of a proton, which is about 1*10^8 C/kg
Therefore the particle is proton.
An electron is initially moving at 1.4 x 107 m/s. It moves 3.5 m in the direction of a uniform electric field of magnitude 120 N/C. What is the kinetic energy of the electron at the end of the motion
Answer:
K.E = 15.57 x 10⁻¹⁷ J
Explanation:
First, we find the acceleration of the electron by using the formula of electric field:
E = F/q
F = Eq
but, from Newton's 2nd Law:
F = ma
Comparing both equations, we get:
ma = Eq
a = Eq/m
where,
E = electric field intensity = 120 N/C
q = charge of electron = 1.6 x 10⁻¹⁹ C
m = Mass of electron = 9.1 x 10⁻³¹ kg
Therefore,
a = (120 N/C)(1.6 x 10⁻¹⁹ C)/(9.1 x 10⁻³¹ kg)
a = 2.11 x 10¹³ m/s²
Now, we need to find the final velocity of the electron. Using 3rd equation of motion:
2as = Vf² - Vi²
where,
Vf = Final Velocity = ?
Vi = Initial Velocity = 1.4 x 10⁷ m/s
s = distance = 3.5 m
Therefore,
(2)(2.11 x 10¹³ m/s²)(3.5 m) = Vf² - (1.4 x 10⁷)²
Vf = √(1.477 x 10¹⁴ m²/s² + 1.96 x 10¹⁴ m²/s²)
Vf = 1.85 x 10⁷ m/s
Now, we find the kinetic energy of electron at the end of the motion:
K.E = (0.5)(m)(Vf)²
K.E = (0.5)(9.1 x 10⁻³¹ kg)(1.85 x 10⁷ m/s)²
K.E = 15.57 x 10⁻¹⁷ J
3. A 4.1 x 10-15 C charge is able to pick up a bit of paper when it is initially 1.0 cm above the paper. Assume an induced charge on the paper of the same magnitude, find the weight of the paper in newtons. Remember to convert the distance to meters and show your work here.
Answer:
[tex]\mathbf{1.51\times10^{-15}N}[/tex]
Explanation:
The computation of the weight of the paper in newtons is shown below:
On the paper, the induced charge is of the same magnitude as on the initial charges and in sign opposite.
Therefore the paper charge is
[tex]q_{paper}=-4.1\times10^{-15}C[/tex]
Now the distance from the charge is
[tex]r=1cm=0.01m[/tex]
Now, to raise the paper, the weight of the paper acting downwards needs to be managed by the electrostatic force of attraction between both the paper and the charge, i.e.
[tex]mg=\frac{k_{e}q_{1}q_{2}}{r^{2}}[/tex]
[tex]\Rightarrow W=mg[/tex]
[tex]=\frac{9\times10^{9}\times(4.1\times10^{-15})^{2}}{0.01^{2}}[/tex]
[tex]=\mathbf{1.51\times10^{-15}N}[/tex]
In 1898, the world land speed record was set by Gaston Chasseloup-Laubat driving a car named Jeantaud. His speed was 39.24 mph (63.15 km/h), much lower than the limit on our interstate highways today. Repeat the calculations of Example 2.7 (assume the car accelerates for 6 miles to get up to speed, is then timed for a one-mile distance, and accelerates for another 6 miles to come to a stop) for the Jeantaud car. (Assume the car moves in the +x direction.)
Find the acceleration for the first 6 miles.
Answer:
the acceleration [tex]a^{\to} = (0.0159 \ \ m/s^2 )i[/tex]
Explanation:
Given that:
the initial speed v₁ = 0 m/s i.e starting from rest ; since the car accelerates at a distance Δx = 6 miles in order to teach that final speed v₂ of 63.15 km/h.
So; the acceleration for the first 6 miles can be calculated by using the formula:
v₂² = v₁² + 2a (Δx)
Making acceleration a the subject of the formula in the above expression ; we have:
v₂² - v₁² = 2a (Δx)
[tex]a = \dfrac{v_2^2 - v_1^2 }{2 \Delta x}[/tex]
[tex]a = \dfrac{(63.15 \ km/s)^2 - (0 \ m/s)^2 }{2 (6 \ miles)}[/tex]
[tex]a = \dfrac{(17.54 \ m/s)^2 - (0 \ m/s)^2 }{2 (9.65*10^3 \ m)}[/tex]
[tex]a =0.0159 \ m/s^2[/tex]
Thus;
Assume the car moves in the +x direction;
the acceleration [tex]a^{\to} = (0.0159 \ \ m/s^2 )i[/tex]
The Sun's energy comes from which nuclear reaction?
A. Nuclear fission
B. Gamma decay
C. Positron emission
D. Nuclear fusion
SUBMIT
Sun's energy comes from the nuclear fusion taking place inside. In nuclear fusion two light nuclei fuses together to form a heavy nuclei with the release of greater amount of energy.
What is nuclear fusion :Nuclear fusion is the process of combining two light nuclei to form a heavy nuclei. In this nuclear process, tremendous energy is released. This is the source of heat and light in stars.
On the other hand, nuclear fission is the process of breaking of a heavy nuclei into two lighter nuclei. Fission also produces massive energy. But in comparison, more energy is produced by nuclear fusion.
Nuclear fission is used in nuclear power generators. The light energy and heat energy comes form the nuclear fusion of hydrogens to form helium nuclei. Hence, option D is correct.
Find more on nuclear fusion:
https://brainly.com/question/12701636
#SPJ2
Consider the same roller coaster. It starts at a height of 40.0 m but once released, it can only reach a height of 25.0 m above the reference point. If the mass of the car is 1000-kg, and the car traveled a distance of 400 m, estimate the magnitude of the frictional force between the car and the track.
Answer:
The magnitude of the frictional force between the car and the track is 367.763 N.
Explanation:
The roller coster has an initial gravitational potential energy, which is partially dissipated by friction and final gravitational potential energy is less. According to the Principle of Energy Conservation and Work-Energy Theorem, the motion of roller coster is represented by the following expression:
[tex]U_{g,1} = U_{g,2} + W_{dis}[/tex]
Where:
[tex]U_{g,1}[/tex], [tex]U_{g,2}[/tex] - Initial and final gravitational potential energy, measured in joules.
[tex]W_{dis}[/tex] - Dissipated work due to friction, measured in joules.
Gravitational potential energy is described by the following formula:
[tex]U = m \cdot g \cdot y[/tex]
Where:
[tex]m[/tex] - Mass, measured in kilograms.
[tex]g[/tex] - Gravitational constant, measured in meters per square second.
[tex]y[/tex] - Height with respect to reference point, measured in meters.
In addition, dissipated work due to friction is:
[tex]W_{dis} = f \cdot \Delta s[/tex]
Where:
[tex]f[/tex] - Friction force, measured in newtons.
[tex]\Delta s[/tex] - Travelled distance, measured in meters.
Now, the energy equation is expanded and frictional force is cleared:
[tex]m \cdot g \cdot (y_{1} - y_{2}) = f\cdot \Delta s[/tex]
[tex]f = \frac{m \cdot g \cdot (y_{1}-y_{2})}{\Delta s}[/tex]
If [tex]m = 1000\,kg[/tex], [tex]g = 9.807\,\frac{m}{s^{2}}[/tex], [tex]y_{1} = 40\,m[/tex], [tex]y_{2} = 25\,m[/tex] and [tex]\Delta s = 400\,m[/tex], then:
[tex]f = \frac{(1000\,kg)\cdot \left(9.807\,\frac{m}{s^{2}} \right)\cdot (40\,m-25\,m)}{400\,m}[/tex]
[tex]f = 367.763\,N[/tex]
The magnitude of the frictional force between the car and the track is 367.763 N.
A glass flask whose volume is 1000 cm^3 at a temperature of 1.00°C is completely filled with mercury at the same temperature. When the flask and mercury are warmed together to a temperature of 52.0°C , a volume of 8.50 cm^3 of mercury overflows the flask.Required:If the coefficient of volume expansion of mercury is βHg = 1.80×10^−4 /K , compute βglass, the coefficient of volume expansion of the glass. Express your answer in inverse kelvins.
Answer:
the coefficient of volume expansion of the glass is [tex]\mathbf{ ( \beta_{glass} )= 1.333 *10^{-5} / K}[/tex]
Explanation:
Given that:
Initial volume of the glass flask = 1000 cm³ = 10⁻³ m³
temperature of the glass flask and mercury= 1.00° C
After heat is applied ; the final temperature = 52.00° C
Temperature change ΔT = 52.00° C - 1.00° C = 51.00° C
Volume of the mercury overflow = 8.50 cm^3 = 8.50 × 10⁻⁶ m³
the coefficient of volume expansion of mercury is 1.80 × 10⁻⁴ / K
The increase in the volume of the mercury = 10⁻³ m³ × 51.00 × 1.80 × 10⁻⁴
The increase in the volume of the mercury = [tex]9.18*10^{-6} \ m^3[/tex]
Increase in volume of the glass = 10⁻³ × 51.00 × [tex]\beta _{glass}[/tex]
Now; the mercury overflow = Increase in volume of the mercury - increase in the volume of the flask
the mercury overflow = [tex](9.18*10^{-6} - 51.00* \beta_{glass}*10^{-3})\ m^3[/tex]
[tex]8.50*10^{-6} = (9.18*10^{-6} -51.00* \beta_{glass}* 10^{-3} )\ m^3[/tex]
[tex]8.50*10^{-6} - 9.18*10^{-6} = ( -51.00* \beta_{glass}* 10^{-3} )\ m^3[/tex]
[tex]-6.8*10^{-7} = ( -51.00* \beta_{glass}* 10^{-3} )\ m^3[/tex]
[tex]6.8*10^{-7} = ( 51.00* \beta_{glass}* 10^{-3} )\ m^3[/tex]
[tex]\dfrac{6.8*10^{-7}}{51.00 * 10^{-3}}= ( \beta_{glass} )[/tex]
[tex]\mathbf{ ( \beta_{glass} )= 1.333 *10^{-5} / K}[/tex]
Thus; the coefficient of volume expansion of the glass is [tex]\mathbf{ ( \beta_{glass} )= 1.333 *10^{-5} / K}[/tex]
How much work is done (by a battery, generator, or some other source of potential difference) in moving Avogadro's number of electrons from an initial point where the electric potential is 9.20 V to a point where the electric potential is -6.90 V
Answer:
-1486 KJ
Explanation:
The work done by an electric field on a charged body is:
W = ΔV * q
where ΔV = change in voltage
q = total charge
The total charge of Avogadro's number of electrons is:
6.0221409 * 10^(23) * -1.6023 * 10^(-19) = -9.65 * 10^(4)
The change in voltage, ΔV, is:
9.20 - (6.90) = 15.4
Therefore, the work done is:
W = -9.65 * 10^(4) * 15.4 = -1.486 * 10^6 J = -1486 KJ
The negative sign means that the motion of the electrons is opposite the electrostatic force.
a What CE describes the way energy is stored in a sandwich
An electron of mass 9.11 x 10^-31 kg has an initial speed of 4.00 x 10^5 m/s. It travels in a straight line, and its speed increases to 6.60 x10^5 m/s in a distance of 5.40 cm. Assume its acceleration is constant.
Required:
a. Determine the magnitude of the force exerted on the electron.
b. Compare this force (F) with the weight of the electron (Fg), which we ignored.
Answer:
a. F = 2.32*10^-18 N
b. The force F is 2.59*10^11 times the weight of the electron
Explanation:
a. In order to calculate the magnitude of the force exerted on the electron you first calculate the acceleration of the electron, by using the following formula:
[tex]v^2=v_o^2+2ax[/tex] (1)
v: final speed of the electron = 6.60*10^5 m/s
vo: initial speed of the electron = 4.00*10^5 m/s
a: acceleration of the electron = ?
x: distance traveled by the electron = 5.40cm = 0.054m
you solve the equation (2) for a and replace the values of the parameters:
[tex]a=\frac{v^2-v_o^2}{2x}=\frac{(6.60*10^5m/s)^2-(4.00*10^5m/s)^2}{2(0.054m)}\\\\a=2.55*10^{12}\frac{m}{s^2}[/tex]
Next, you use the second Newton law to calculate the force:
[tex]F=ma[/tex]
m: mass of the electron = 9.11*10^-31kg
[tex]F=(9.11*10^{-31}kg)(2.55*10^{12}m/s^2)=2.32*10^{-18}N[/tex]
The magnitude of the force exerted on the electron is 2.32*10^-18 N
b. The weight of the electron is given by:
[tex]F_g=mg=(9.11*10^{-31}kg)(9.8m/s^2)=8.92*10^{-30}N[/tex]
The quotient between the weight of the electron and the force F is:
[tex]\frac{F}{F_g}=\frac{2.32*10^{-18}N}{8.92*10^{-30}N}=2.59*10^{11}[/tex]
The force F is 2.59*10^11 times the weight of the electron
You are presented with several wires made of the same conducting material. The radius and drift speed are given for each wire in terms of some unknown units r and v. Rank the wires in order of decreasing electron current. Rank from most to least electron current. To rank items as equivalent, overlap them.
a) radius=3r, drift speed=1v
b) radius=4r, drift speed=0.5v
c) radius=1r, drift speed=5v
d) radius=2r, drift speed=2.5v
Answer:
d > a > b > c
Explanation:
Given that
a) radius = 3r and drift speed = 1v
b) radius = 4r and drift speed = 0.5v
c) radius = 1r and drift speed = 5v
d) radius = 2r and drift speed = 2.5v
Based on the above information, the ranking of the wires for reducing the electron current is
As we can see that the radius i.e to be less and the drift speed that is highest so it should be rank one
And, According to that, other options are ranked
Therefore, the ranking would be d > a > b > c
During a particular time interval, the displacement of an object is equal to zero. Must the distance traveled by this object also equal to zero during this time interval? Group of answer choices
Answer: No, we can have a displacement equal to 0 while the distance traveled is different than zero.
Explanation:
Ok, let's write the definitions:
Displacement: The displacement is equal to the difference between the final position and the initial position.
Distance traveled: Total distance that you moved.
So, for example, if at t = 0s, you are in your house, then you go to the store, and then you return to your house, we have:
The displacement is equal to zero, because the initial position is your house and the final position is also your house, so the displacement is zero.
But the distance traveled is not zero, because you went from you traveled the distance from your house to the store two times.
So no, we can have a displacement equal to zero, but a distance traveled different than zero.
A 432 kg merry-go-round in the shape of a horizontal disk with a radius of 2.3 m is set in motion by wrapping a rope about the rim of the disk and pulling on the rope. How large a torque would have to be exerted to bring the merry-go-round from rest to an angular speed of 3.1 rad/s in 2.1 s
Answer:
τ = 1679.68Nm
Explanation:
In order to calculate the required torque you first take into account the following formula:
[tex]\tau=I\alpha[/tex] (1)
τ: torque
I: moment of inertia of the merry-go-round
α: angular acceleration
Next, you use the following formulas for the calculation of the angular acceleration and the moment of inertia:
[tex]\omega=\omega_o+\alpha t[/tex] (2)
[tex]I=\frac{1}{2}MR^2[/tex] (3) (it is considered that the merry-go-round is a disk)
w: final angular speed = 3.1 rad/s
wo: initial angular speed = 0 rad/s
M: mass of the merry-go-round = 432 kg
R: radius of the merry-go-round = 2.3m
You solve the equation (2) for α. Furthermore you calculate the moment of inertia:
[tex]\alpha=\frac{\omega}{t}=\frac{3.1rad/s}{2.1s}=1.47\frac{rad}{s^2}\\\\I=\frac{1}{2}(432kg)(2.3)^2=1142.64kg\frac{m}{s}[/tex]
Finally, you replace the values of the moment of inertia and angular acceleration in the equation (1):
[tex]\tau=(1142.64kgm/s)(1.47rad/s^2)=1679.68Nm[/tex]
The required torque is 1679.68Nm
A bead slides without friction around a loop the-loop. The bead is released from a height of 17.6 m from the bottom of the loop-the loop which has a radius 5 m. The acceleration of gravity is 9.8 m/s^2.
Required:
How large is the normal force on it if its mass is 5g?
Answer:
N₁ = 393.96 N and N = 197.96 N
Explanation:
In This exercise we must use Newton's second law to find the normal force. Let's use two points the lowest and the highest of the loop
Lowest point, we write Newton's second law n for the y-axis
N -W = m a
where the acceleration is ccentripeta
a = v² / r
N = W + m v² / r
N = mg + mv² / r
we can use energy to find the speed at the bottom of the circle
starting point. Highest point where the ball is released
Em₀ = U = m g h
lowest point. Stop curl down
[tex]Em_{f}[/tex] = K = ½ m v²
Emo = Em_{f}
m g h = ½ m v²
v² = 2 gh
we substitute
N = m (g + 2gh / r)
N = mg (1 + 2h / r)
let's calculate
N₁ = 5 9.8 (1 + 2 17.6 / 5)
N₁ = 393.96 N
headed up
we repeat the calculation in the longest part of the loop
-N -W = - m v₂² / r
N = m v₂² / r - W
N = m (v₂²/r - g)
we seek speed with the conservation of energy
Em₀ = U = m g h
final point. Top of circle with height 2r
[tex]Em_{f}[/tex] = K + U = ½ m v₂² + mg (2r)
Em₀ = Em_{f}
mgh = ½ m v₂² + 2mgr
v₂² = 2 g (h-2r)
we substitute
N = m (2g (h-2r) / r - g)
N = mg (2 (h-r) / r 1) = mg (2h/r -2 -1)
N = mg (2h/r - 3)
N = 5 9.8 (2 17.6 / 5 -3)
N = 197.96 N
Directed down
wo parallel conducting plates are separated by 10.0 cm, and one of them is taken to be at zero volts. (a) What is the magnitude of the electric field strength between them, if the potential 7.05 cm from the zero volt plate (and 2.95 cm from the other) is 393 V?
Answer:
-18896.49 V/m
Explanation:
Distance between the two plates = 10 cm = 10 x [tex]10^{-2}[/tex] m = 0.1 m
Also, one of the plates is taken as zero volt.
a. The potential strength between the zero volt plate, and 7.05 cm (0.0705 m) away is 393 V
b. The potential strength between the other plate, and 2.95 cm (0.0295 m) away is 393 V
Potential field strength = -dV/dx
where dV is voltage difference between these points,
dx is the difference in distance between these points
For the first case above,
potential field strength = -393/0.0705 = -5574.46 V/m
For the second case ,
potential field strength = -393/0.0295 = -13322.03 V/m
Magnitude of the field strength across the plates will be
-5574.46 + (-13322.03) = -5574.46 + 13322.03 = -18896.49 V/m
In 1949, an automobile manufacturing company introduced a sports car (the "Model A") which could accelerate from 0 to speed v in a time interval of Δt. In order to boost sales, a year later they introduced a more powerful engine (the "Model B") which could accelerate the car from 0 to speed 2.92v in the same time interval. Introducing the new engine did not change the mass of the car. Compare the power of the two cars, if we assume all the energy coming from the engine appears as kinetic energy of the car.
Answer: [tex]\frac{P_B}{P_A}[/tex] = 8.5264
Explanation: Power is the rate of energy transferred per unit of time: P = [tex]\frac{E}{t}[/tex]
The energy from the engine is converted into kinetic energy, which is calculated as: [tex]KE = \frac{1}{2}.m.v^{2}[/tex]
To compare the power of the two cars, first find the Kinetic Energy each one has:
K.E. for Model A
[tex]KE_A = \frac{1}{2}.m.v^{2}[/tex]
K.E. for model B
[tex]KE_B = \frac{1}{2}.m.(2.92v)^{2}[/tex]
[tex]KE_B = \frac{1}{2}.m.8.5264v^{2}[/tex]
Now, determine Power for each model:
Power for model A
[tex]P_{A}[/tex] = [tex]\frac{m.v^{2} }{2.t}[/tex]
Power for model B
[tex]P_B = \frac{m.8.5264.v^{2} }{2.t}[/tex]
Comparing power of model B to power of model A:
[tex]\frac{P_B}{P_A} = \frac{m.8.5264.v^{2} }{2.t}.\frac{2.t}{m.v^{2} }[/tex]
[tex]\frac{P_B}{P_A} =[/tex] 8.5264
Comparing power for each model, power for model B is 8.5264 better than model A.
When mapping the equipotentials on the plates with different electrode configurations you may find that some have significant areas with uniform distribution of the equipotential lines. If the distance between such lines is 0.5 cm, what is the electric field there (in units SI)
Answer:
E = V/5 x10⁻³
Explanation:
if the potential difference is V
then electric field E is given by
E = V/d
d = 0.5cm = 5 x 10⁻³m
E = V/5 x10⁻³
An astronaut is in an all-metal chamber outside the space station when a solar storm results in the deposit of a large positive charge on the station. Which statement is correct?
a. The astronaut must abandon the chamber immediately to avoid being electrocuted.
b. The astronaut will be safe only if she is wearing a spacesuit made of non-conducting materials.
c. The astronaut does not need to worry: the charge will remain on the outside surface.
d. The astronaut must abandon the chamber if the electric field on the outside surface becomes greater than the breakdown field of air.
d. The astronaut must abandon the chamber immediately because the electric field inside the chamber is non-uniform.
Answer:
c. The astronaut does not need to worry: the charge will remain on the outside surface.
Explanation:
The astronaut need not worry because according to Gauss's law of electrostatic, a hollow charged surface will have a net zero charge on the inside. This is the case of a Gauss surface, and all the charges stay on the surface of the metal chamber. This same principle explains why passengers are safe from electrostatic charges, in an enclosed aircraft, high up in the atmosphere; all the charges stay on the surface of the aircraft.
A wave travels at a speed of 242 m/s. If the distance between crests is 0.11
m, what is the frequency of the wave? Use |
A. 0.00045 Hz
B. 27 Hz
C. 2200 Hz
D. 190 Hz
Answer:
f = 2200 Hz
Explanation:
It is given that,
Speed of a wave is 242 m/s
The distance between crests is 0.11 m
We need to find the frequency of the wave. The distance between crests is called wavelength of a wave. So,
[tex]v=f\lambda\\\\f=\dfrac{v}{\lambda}\\\\f=\dfrac{242}{0.11}\\\\f=2200\ Hz[/tex]
So, the frequency of the wave is 2200 Hz.
Answer:2200 hz
Explanation:
Imagine a metal rod 0.4 m long with a mass of 2 kg. You attach the rod at one end by a lightweight 3.0-m-long cord and twirl the rod around your head. Which expression below gives the best estimate of the moment of inertia of the rod-cord system?
a) I=mr^2, where m = 2kg and r = 3.2m
b) I=1/3mr^2, where m = 2kg and r = 3.4
c) I=1/12mr^2, where m = 2kg and r = 1.7m
d) I=mr^2, where m= 2kg and r = 3.4m
Answer:
Explanation:
Given that
a metal rod 0.4 m long
mass of 2 kg
lightweight 3.0-m-long cord
a) I=mr^2, where m = 2kg and r = 3.2m
b) I=1/3mr^2, where m = 2kg and r = 3.4
c) I=1/12mr^2, where m = 2kg and r = 1.7m
d) I=mr^2, where m= 2kg and r = 3.4m
[tex]I=\int\limits^{3.4}_3 \lambda dx \,x^2\\\\=\lambda\frac{x^3}{3} |^{3.4}_{3}[/tex]
[tex]I=\frac{M}{L}[\frac{3.4^3}{3}-\frac{3^3}{3} ] \\\\I=\frac{2}{(0.4\times3)}[\frac{3.4^3}{3}-\frac{3^3}{3} ]\\\\I=\frac{2}{1.2}(39.304-9)\\\\I=1.67\times12.304\\\\I=20.51[/tex]
[tex]a)I_1=mr^2\\\\I_1=2\times3.2^2\\\\I_1=20.48kgm^2\\\\b)I_2=\frac{1}{3} mr^2\\\\=\frac{1}{3} \times2\times3.4^2\\\\I_2=7.71kgm^2\\\\c)I_3=\frac{1}{12} mr^2\\\\I_3=\frac{1}{12} \times2\times1.7^2\\\\I_3=0.461kg/m^2\\\\d)I_4=mr^2\\\\I_4=2\times3.462\\\\I_4=23.12kg/m^2[/tex]
A light source simultaneously emits light of two wavelengths, 480 nm and 560 nm, respectively. The source is used in a double-slit interference experiment where the slit spacing is a 0.040 mm, and the distance between double slits and the screen is 1.2 m. What is the separation between the second-order bright fringes of the two wavelengths as they appear on the screen
Answer:
0.48 cm
Explanation:
given data
wavelength = 480 nm
wavelength = 560 nm
slit spacing = 0.040 mm
distance between double slits and the screen = 1.2 m
solution
we know that (1 nm= [tex]10^{-9}[/tex] m)
we wil take here equation of equations of interference that is
ym = R × (m λ)/d ..........................1
here m = 2 R i.e distance of screen and slit
so put here value and we get
separation between the second-order bright fringes = 0.48 cm
High voltage power is often carried in wire bundles made up of individual strands. In your initial post to the discussion, discuss the forces on the strands of wire due to the current flowing through them. What would happen if the force acted opposite of the known behavior
Answer:
More current will be loss through the metal wire strands if the force on them was repulsive, and more stress will be induced on the wire strands due to internal and external flexing.
Explanation:
A wire bundle is made up of wire strands bunched together to increase flexibility that is not always possible in a single solid metal wire conductor. In the strands of wire carrying a high voltage power, each strand carries a certain amount of current, and the current through the strands all travel in the same direction. It is know that for two conductors or wire, separated by a certain distance, that carries current flowing through them in the same direction, an attractive force is produced on these wires, one on the other. This effect is due to the magnetic induction of a current carrying conductor. The forces between these strands of the high voltage wire bundle, pulls the wire strands closer, creating more bond between these wire strands and reducing internal flex induced stresses.
If the case was the opposite, and the wires opposed themselves, the effect would be that a lot of cost will be expended in holding these wire strands together. Also, stress within the strands due to the repulsion, will couple with external stress from the flexing of the wire, resulting in the weakening of the material.
The biggest problem will be that more current will be lost in the wire due to increased surface area caused by the repulsive forces opening spaces between the strand. This loss is a s a result of the 'skin effect' in wire transmission, in which current tends to flow close to the surface of the metal wire. The skin effect generates power loss as heat through the exposed surface area.
A popular physics lab involves a hand generator and an assortment of wires with different values of resistance. In the lab, the leads of the generator are connected across each wire in turn. For each wire, students attempt to turn the generator handle at the same constant rate. Students must push harder on the handle when the leads of the generator are connected__________. This is because turning the handle at a given constant rate produces__________ , regardless of what is connected to the leads. So, when turning the handle at a constant rate, lab students must push harder in cases where there is________
Answer:
Explanation:
Students must push harder on the handle when the leads of the generator are connected across the wire with the lowest resistance.
This is because turning the handle at a given constant rate produces a constant voltage across the leads, regardless of what is connected to the leads.
So, when turning the handle at a constant rate, lab students must push harder in case where there is a greater current through the connected wire.
A power of 100 W is delivered to a certain resistor when the applied voltage is 100 V. Find the resistance. Suppose that the voltage is reduced by 10% to 90 V. By what percentage is the power reduced
Answer:
The resistance is 100 ohmsThe power has reduced 19%Explanation:
The formula for power is given as
[tex]P=\frac{V^2}{R}[/tex]
Given data
power= 100 W
voltage= 100 V
Substituting into the power formula the resistance is
[tex]100=\frac{100^2}{R} \\\\100*R=10000\\\\R= \frac{10000}{100} \\\\R= 100 ohms[/tex]
The resistance is 100 ohms
Now the power has been reduced by 10% (from 100 to 90V)
the power is
[tex]P= \frac{90^2}{100} \\\\P= \frac{8100}{100} \\\\P= 81 watts[/tex]
The power has reduced 19% from 100 watt to 81 watt
A circuit contains two elements, but it is not known if they are L, R, or C. The current in this circuit when connected to a 120-V 60 Hz source is 5.3 A and lags the voltage by 65∘.
Part A. What are the two elements?
Part B. What are their values?
Express your answer using two significant figures
Answer:
the two elements are resistor R and inductor L
answers in two significant figures
R = 9.6Ω
L = 54mH
Explanation:
A box on a ramp is connected by a rope to a winch. The winch is turned so that the box moves down the ramp at a constant speed. The box experiences kinetic friction with the ramp. Which forces on the box do zero work as the box moves down the ramp?
a. Weight (gravitational force)
b. Normal force
c. Kinetic friction force
d. Tension force
e. None
Answer:
Option B:
The normal force
Explanation:
The normal force does no work as the box slides down the ramp.
Work can only be done when the force succeeds in moving the object in the direction of the force.
All the other forces involved have a component that is moving the box in their direction.
However, the normal force does not, as it points downwards into the ramp. Since the normal force is pointing into the ramp, and the box is sliding down the ramp, we can say that no work is being done by the normal force because the box is not moving in its direction (which would have been the box moving into the ramp)
What is a possible state for an object in the absence of a net force?
There is only one possible state: constant uniform motion. That means constant speed in a straight line.
(If the constant speed happens to be zero, this description also covers the case where the object isn't moving. That special case is called "at rest".)
Answer:
at restzero accelerationconstant speedHope this helps
A charge of 4.5 × 10-9 C is located 3.2 m from a charge of -2.8 × 10-9 C. Find the
electrostatic force exerted by one charge on the other.
Answer:
[tex]F = -1.107*10^{-8} N\\|F| = 1.107*10^{-8} N[/tex]
Explanation:
[tex]q_1 = 4.5 * 10^{-9} C[/tex]
[tex]q_2 = -2.8 * 10^{-9} C[/tex]
The distance separating the two charges, r = 3.2 m
According to Coulomb's law of electrostatic attraction, the electrostatic force between the two charges can be given by the formula:
[tex]F = \frac{kq_{1} q_{2} }{r^2}[/tex]
Where [tex]k = 9.0 * 10^9 Nm^2/C^2[/tex]
[tex]F = \frac{9*10^9 * 4.5*10^{-9} * (-2.8*10^{-9}}{3.2^2} \\F = \frac{-113.4*10^{-9}}{10.24}\\F = -11.07 *10^{-9}\\F = -1.107*10^{-8}N[/tex]
Answer:
F = 1.1074 × [tex]10^{-8}[/tex] N
Explanation:
An electrostatic force is either a force or attraction or repulsion between two charges. It can be determined by:
F = [tex]\frac{kq_{1}q_{2} }{r^{2} }[/tex]
where: F is the force, k is a constant, [tex]q_{1}[/tex] is the first charge, [tex]q_{2}[/tex] is the second charge and r the distance between the charges.
Given that: k = 9 × [tex]10^{9}[/tex] N[tex]m^{2}[/tex][tex]C^{-2}[/tex], [tex]q_{1}[/tex] = 4.5 × [tex]10^{-9}[/tex]C, [tex]q_{2}[/tex] = -2.8 × [tex]10^{-9}[/tex]C and r = 3.2 m.
Then,
F = [tex]\frac{9*10^{9}*4.5*10^{-9}*2.8*10^{-9} }{3.2^{2} }[/tex]
= [tex]\frac{1.134*10^{-7} }{10.24}[/tex]
= 1.1074 × [tex]10^{-8}[/tex]
The electrostatic force exerted is 1.1074 × [tex]10^{-8}[/tex] N, and it is a force of attraction.
At the local playground, a 21-kg child sits on the right end of a horizontal teeter-totter, 1.8 m from the pivot point. On the left side of the pivot an adult pushes straight down on the teeter-totter with a force of 151 N. Part A In which direction does the teeter-totter rotate if the adult applies the force at a distance of 3.0 m from the pivot?Part B
In which direction does the teeter-totter rotate if the adult applies the force at a distance of 2.5 m from the pivot?
(clockwise/counterclockwise)
Part C
In which direction does the teeter-totter rotate if the adult applies the force at a distance of 2.0 m from the pivot?
(clockwise/counterclockwise)
Answer:
By convention a negative torque leads to clockwise rotation and a positive torque leads to counterclockwise rotation.
here weight of the child =21kgx9.8m/s2 = 205.8N
the torque exerted by the child Tc = - (1.8)(205.8) = -370.44N-m ,negative sign is inserted because this torque is clockwise and is therefore negative by convention.
torque exerted by adult Ta = 3(151) = 453N , counterclockwise torque.
net torque Tnet = -370.44+453 =82.56N , which is positive means counterclockwise rotation.
b) Ta = 2.5x151 = 377.5N-m
Tnet = -370.44+377.5 = 7.06N-m , positive ,counterclockwise rotation.
c)Ta = 2x151 = 302N-m
Tnet = -370.44+302 = -68.44N-m, negative,clockwise rotation.