Answer:
The rubber band will be stretched 0.02 m.
The work done in stretching is 0.11 J.
Explanation:
Force 1 = 44 N
extension of rubber band = 0.080 m
Force 2 = 11 N
extension = ?
According to Hooke's Law, force applied is proportional to the extension provided elastic limit is not extended.
F = ke
where k = constant of elasticity
e = extension of the material
F = force applied.
For the first case,
44 = 0.080K
K = 44/0.080 = 550 N/m
For the second situation involving the same rubber band
Force = 11 N
e = 550 N/m
11 = 550e
extension e = 11/550 = 0.02 m
The work done to stretch the rubber band this far is equal to the potential energy stored within the rubber due to the stretch. This is in line with energy conservation.
potential energy stored = [tex]\frac{1}{2}ke^{2}[/tex]
==> [tex]\frac{1}{2}* 550* 0.02^{2}[/tex] = 0.11 J
a point charge q is located at the center of a cube with edge length d. whatis the value of the flux over one face of the cube
Answer:
q/6Eo
Explanation:
See attached file pls
Consider a skateboarder who starts from rest at the top of ramp that is inclined at an angle of 18.0 ∘ to the horizontal.
Assuming that the skateboarder's acceleration is gsin 18.0 ∘, find his speed when he reaches the bottom of the ramp in 3.50 s .
Answer:
Explanation:
v= u + at
v is final velocity , u is initial velocity . a is acceleration and t is time
Initial velocity u = 0 . Putting the given values in the equation
v = 0 + g sin 18 x 3.5
= 10.6 m /s
For a skateboarder who starts from the rest, the speed when he reaches the bottom of the ramp will be 10.6 m/s.
What are Velocity and Acceleration?The term "velocity" refers to a vector measurement of the rate and direction of motion. Velocity is the rate of movement in a single direction, to put it simply. Velocity can be used to determine how fast a rocket is heading into space and how fast a car is moving north on a congested motorway.
There are several types of velocity :
Instantaneous velocityAverage VelocityUniform VelocityNon-Uniform VelocityThe pace at which a person's velocity changes is known as acceleration. This implies that an object is accelerating if its velocity is rising or falling. An object that is accelerating won't have a steady change in location every second like an item moving at a constant speed does.
According to the question, the given values are :
Time, t = 3.50 sec
Initial Velocity, u = 0 m/s
Use equation of motion :
v = u+at
v = 0+ g sin 18 × 3.5
v = 10.6 m/s.
So, the final velocity will be 10.6 m/s.
To get more information about Velocity and Acceleration :
https://brainly.com/question/14683118
#SPJ2
Four identical charges particles of charge 1Uc, 2Uc,
3Uc and 4Uc
are placed at x = lm, x=2m,
x=3m and
x=5m. The electric field intensity
at origin is?
Answer:
17.94 kN/C is the electric field intensity at the origin due to the charges.
Explanation:
From the question, we are told that
The distance of 1 μC from origin = 1 m
The distance of 2 μC from origin = 2 m
The distance of 3 μC from origin = 3 m
The distance of 4 μC from origin = 5 m
Therefore, for us to find the electric field intensity, we'll solve below:
The formula for Electric field intensity = ( k * q ) / ( r * r )
where , r is distance ,
k = 9 * 10^9 ,
and , q is charge .
now ,
electric field intensity at the origin = [ k * 10^(-6) / 1 * 1 ] +[ k * 2 * 10^(-6) / 2 * 2 ] + [ k * 3 * 10^(-6) / 3 * 3 ] + [ k * 4 * 10^(-6) / 5 * 5 ]
=> electric field intensity at the origin = k * 10^(-6) [ 1 + 1/2 + 1/3 + 4/25 ] N/C
=> electric field intensity at the origin = 9 * 10^9 * 10^(-6) * 1.99 N/C
=> electric field intensity at the origin = 17.94 kN/C
A length of organ pipe is closed at one end. If the speed of sound is 344 m/s, what length of pipe (in cm) is needed to obtain a fundamental frequency of 50 Hz
Answer:
The length = 27.52m
Explanation:
v=f x wavelength
In a high school swim competition, a student takes 1.6 s to complete 1.5 somersaults. Determine the average angular speed of the diver, in rad/s, during this time interval.
Answer:
The angular speed is [tex]w = 5.89 \ rad/s[/tex]
Explanation:
From the question we are told that
The time taken is [tex]t = 1.6 s[/tex]
The number of somersaults is n = 1.5
The total angular displacement during the somersault is mathematically represented as
[tex]\theta = n * 2 * \pi[/tex]
substituting values
[tex]\theta = 1.5 * 2 * 3.142[/tex]
[tex]\theta = 9.426 \ rad[/tex]
The angular speed is mathematically represented as
[tex]w = \frac{\theta }{t}[/tex]
substituting values
[tex]w = \frac{9.426}{1.6}[/tex]
[tex]w = 5.89 \ rad/s[/tex]
A guitar string 0.65 m long has a tension of 61 N and a mass per unit length of 3.0 g/m. (i) What is the speed of waves on the string when it is plucked? (ii) What is the string's fundamental frequency of vibration when plucked? (iii) At what other frequencies will this string vibrate?
Answer:
i
[tex]v = 142.595 \ m/s[/tex]
ii
[tex]f = 109.69 \ Hz[/tex]
iii1 )
[tex]f_2 =219.4 Hz[/tex]
iii2)
[tex]f_3 =329.1 Hz[/tex]
iii3)
[tex]f_4 =438.8 Hz[/tex]
Explanation:
From the question we are told that
The length of the string is [tex]l = 0.65 \ m[/tex]
The tension on the string is [tex]T = 61 \ N[/tex]
The mass per unit length is [tex]m = 3.0 \ g/m = 3.0 * \frac{1}{1000} = 3 *10^{-3 } \ kg /m[/tex]
The speed of wave on the string is mathematically represented as
[tex]v = \sqrt{\frac{T}{m} }[/tex]
substituting values
[tex]v = \sqrt{\frac{61}{3*10^{-3}} }[/tex]
[tex]v = 142.595 \ m/s[/tex]
generally the string's frequency is mathematically represented as
[tex]f = \frac{nv}{2l}[/tex]
n = 1 given that the frequency we are to find is the fundamental frequency
So
substituting values
[tex]f = \frac{142.595 * 1 }{2 * 0.65}[/tex]
[tex]f = 109.69 \ Hz[/tex]
The frequencies at which the string would vibrate include
1 [tex]f_2 = 2 * f[/tex]
Here [tex]f_2[/tex] is know as the second harmonic and the value is
[tex]f_2 = 2 * 109.69[/tex]
[tex]f_2 =219.4 Hz[/tex]
2
[tex]f_3 = 3 * f[/tex]
Here [tex]f_3[/tex] is know as the third harmonic and the value is
[tex]f_3 = 3 * 109.69[/tex]
[tex]f_3 =329.1 Hz[/tex]
3
[tex]f_3 = 4 * f[/tex]
Here [tex]f_4[/tex] is know as the fourth harmonic and the value is
[tex]f_3 = 4 * 109.69[/tex]
[tex]f_4 =438.8 Hz[/tex]
A cylindrical shell of radius 7.00 cm and length 2.21 m has its charge uniformly distributed on its curved surface. The magnitude of the electric field at a point 15.2 cm radially outward from its axis (measured from the midpoint of the shell) is 36.0 kN/C. (a) Find the net charge on the shell.
Answer:
The net charge on the shell is 30x10^-9C
Explanation:
Pls see attached file
A positive kaon (K+) has a rest mass of 494 MeV/c² , whereas a proton has a rest mass of 938 MeV/c². If a kaon has a total energy that is equal to the proton rest energy, the speed of the kaon is most nearly:___________.
A. 0.25c
B. 0.40c
C. 0.55c
D. 0.70c
E. 0.85c
Answer:
0.85c
Explanation:
Rest mass of Kaon [tex]M_{0K}[/tex] = 494 MeV/c²
Rest mass of proton [tex]M_{0P}[/tex] = 938 MeV/c²
The rest energy is gotten by multiplying the rest mass by the square of the speed of light c²
for the kaon, rest energy [tex]E_{0K}[/tex] = 494c² MeV
for the proton, rest energy [tex]E_{0P}[/tex] = 938c² MeV
Recall that the rest energy, and the total energy are related by..
[tex]E[/tex] = γ[tex]E_{0}[/tex]
which can be written in this case as
[tex]E_{K}[/tex] = γ[tex]E_{0K}[/tex] ...... equ 1
where [tex]E[/tex] = total energy of the kaon, and
[tex]E_{0}[/tex] = rest energy of the kaon
γ = relativistic factor = [tex]\frac{1}{\sqrt{1 - \beta ^{2} } }[/tex]
where [tex]\beta = \frac{v}{c}[/tex]
But, it is stated that the total energy of the kaon is equal to the rest mass of the proton or its equivalent rest energy, therefore...
[tex]E_{K}[/tex] = [tex]E_{0P}[/tex] ......equ 2
where [tex]E_{K}[/tex] is the total energy of the kaon, and
[tex]E_{0P}[/tex] is the rest energy of the proton.
From [tex]E_{K}[/tex] = [tex]E_{0P}[/tex] = 938c²
equ 1 becomes
938c² = γ494c²
γ = 938c²/494c² = 1.89
γ = [tex]\frac{1}{\sqrt{1 - \beta ^{2} } }[/tex] = 1.89
1.89[tex]\sqrt{1 - \beta ^{2} }[/tex] = 1
squaring both sides, we get
3.57( 1 - [tex]\beta^{2}[/tex]) = 1
3.57 - 3.57[tex]\beta^{2}[/tex] = 1
2.57 = 3.57[tex]\beta^{2}[/tex]
[tex]\beta^{2}[/tex] = 2.57/3.57 = 0.72
[tex]\beta = \sqrt{0.72}[/tex] = 0.85
but, [tex]\beta = \frac{v}{c}[/tex]
v/c = 0.85
v = 0.85c
6. Two forces of 50 N and 30 N, respectively, are acting on an object. Find the net force (in
N) on the object if
the forces are acting in the same direction
b. the forces are acting in opposite directions.
Answer:
same direction = 80 (n)
opposite direction = 20 (n) going one direction
Explanation:
same direction means they are added to each other
and opposite means acting on eachother
A tightly wound toroid of inner radius 1.2 cm and outer radius 2.4 cm has 960 turns of wire and carries a current of 2.5 A.
Requried:
a. What is the magnetic field at a distance of 0.9 cm from the center?
b. What is the field 1.2 cm from the center?
Answer:
a
[tex]B = 0.0533 \ T[/tex]
b
[tex]B = 0.04 \ T[/tex]
Explanation:
From the question we are told that
The inner radius is [tex]r = 1.2 \ cm = 0.012 \ m[/tex]
The outer radius is [tex]r_o = 2.4 \ cm = \frac{2.4}{100} = 0.024 \ m[/tex]
The nu umber of turns is [tex]N = 960[/tex]
The current it is carrying is [tex]I = 2. 5 A[/tex]
Generally the magnetic field is mathematically represented as
[tex]B = \frac{\mu_o * N* I }{2 * \pi * r }[/tex]
Where [tex]\mu_o[/tex] is the permeability of free space with a constant value
[tex]\mu = 4\pi * 10^{-7} N/A^2[/tex]
And the given distance where the magnetic field is felt is r = 0.9 cm = 0.009 m
Now substituting values
[tex]B = \frac{ 4\pi * 10^{-7} * 960* 2.5 }{2 * 3.142 * 0.009 }[/tex]
[tex]B = 0.0533 \ T[/tex]
Fro the second question the distance of the position considered from the center is r = 1.2 cm = 0.012 m
So the magnetic field is
[tex]B = \frac{ 4\pi * 10^{-7} * 960* 2.5 }{2 * 3.142 * 0.012 }[/tex]
[tex]B = 0.04 \ T[/tex]
The magnetic field at a distance of 0.9 cm from the center of the toroid is 0.053 T.
The magnetic field at a distance of 1.2 cm from the center of the toroid is 0.04 T.
The given parameters;
radius of the toroid, r = 1.2 cm = 0.012 mouter radius of the toroid, R = 2.4 cm = 0.024 mnumber of turns, N = 960 turnscurrent in wire, I = 2.5 AThe magnetic field at a distance of 0.9 cm from the center of the toroid is calculated as follows;
[tex]B = \frac{\mu_o NI}{2\pi r} \\\\B = \frac{(4\pi \times 10^{-7})\times (960) \times (2.5)}{2\pi \times 0.009} \\\\B = 0.053 \ T[/tex]
The magnetic field at a distance of 1.2 cm from the center of the toroid is calculated as follows;
[tex]B = \frac{\mu_o NI}{2\pi r} \\\\B = \frac{(4\pi \times 10^{-7})\times (960) \times (2.5)}{2\pi \times 0.012} \\\\B = 0.04 \ T[/tex]
Learn more here:https://brainly.com/question/19564329
A man stands on a merry-go-round that is rotating at 2.5 rad/s. If the coefficient of static friction between the man’s shoes and the merry-go-round is µs = 0.5, how far from the axis of rotation can he stand without sliding?
Answer:
0.8 m
Explanation:
Draw a free body diagram. There are three forces:
Weight force mg pulling down,
Normal force N pushing up,
and friction force Nμ pushing towards the center.
Sum of forces in the y direction:
∑F = ma
N − mg = 0
N = mg
Sum of forces in the centripetal direction:
∑F = ma
Nμ = m v²/r
Substitute and simplify:
mgμ = m v²/r
gμ = v²/r
Write v in terms of ω and solve for r:
gμ = ω²r
r = gμ/ω²
Plug in values:
r = (10 m/s²) (0.5) / (2.5 rad/s)²
r = 0.8 m
The distance (radius) from the axis of rotation which the man can stand without sliding is 0.784 meters.
Given the following data:
Angular speed = 2.5 rad/s.Coefficient of static friction = 0.5To determine how far (radius) from the axis of rotation can the man stand without sliding:
We would apply Newton's Second Law of Motion, to express the centripetal and force of static friction acting on the man.
[tex]\sum F = \frac{mv^2}{r} - uF_n\\\\\frac{mv^2}{r} = uF_n[/tex]....equation 1.
But, Normal force, [tex]F_n = mg[/tex]
Substituting the normal force into eqn. 1, we have:
[tex]\frac{mv^2}{r} = umg\\\\\frac{v^2}{r} = ug[/tex]....equation 2.
Also, Linear speed, [tex]v = r\omega[/tex]
Substituting Linear speed into eqn. 2, we have:
[tex]\frac{(r\omega )^2}{r} = ug\\\\r\omega ^2 = ug\\\\r = \frac{ug}{\omega ^2}[/tex]
Substituting the given parameters into the formula, we have;
[tex]r = \frac{0.5 \times 9.8}{2.5^2} \\\\r = \frac{4.9}{6.25}[/tex]
Radius, r = 0.784 meters
Read more: https://brainly.com/question/13754413
The compressor of an air conditioner draws an electric current of 16.2 A when it starts up. If the start-up time is 1.45 s long, then how much electric charge passes through the circuit during this period
Answer:
Q = 23.49 C
Explanation:
We have,
Electric current drawn by the air conditioner is 16.2 A
Time, t = 1.45 s
It is required to find the electric charge passes through the circuit during this period. We know that electric current is defined as the electric charge flowing per unit time. So,
[tex]I=\dfrac{q}{t}\\\\q=It\\\\q=16.2\times 1.45\\\\q=23.49\ C[/tex]
So, the charge of 23.49 C is passing through the circuit during this period.
Given that the velocity of blood pumping through the aorta is about 30 cm/s, what is the total current of the blood passing through the aorta (in grams of blood per second)?
Answer:
94.248 g/sec
Explanation:
For solving the total current of the blood passing first we have to solve the cross sectional area which is given below:
[tex]A_1 = \pi R^2\\\\A_1 = \pi (1)^2\\\\A_1 = 3.1416 cm^2[/tex]
And, the velocity of blood pumping is 30 cm^2
Now apply the following formula to solve the total current
[tex]Q = \rho A_1V_1\\\\Q = (1)(3.1416)(30)\\\\[/tex]
Q = 94.248 g/sec
Basically we applied the above formula So, that the total current could come
Which one of the following is the shortest length?
A)
100 meters
C)
104 millimeters
E)
10 nanometers
B)
10² centimeters
D)
105 micrometers
Answer:
Option E (10 nanometers) is the shortest lengthExplanation:
From,
1cm = [tex]10^{-2}m[/tex]
1mm = [tex]10^{-3}m[/tex]
1nanometer = [tex]10^{-9[/tex]
1micrometer = [tex]10^{-6[/tex]
Therefore,
A) [tex]10^0[/tex] meters = 1meter
B) [tex]10^2[/tex] cm = [tex]10^2 * 10^{-2} = 1meter[/tex]
C) [tex]10^4[/tex] mm = [tex]10^4 * 10^{-3} = 10meter[/tex]
D) [tex]10^5[/tex] micrometer = [tex]10^5 * 10^{-6} = 0.1meter[/tex]
E) [tex]10[/tex] nanometer = [tex]10 * 10^-9 = 1*10^{-8}[/tex]
Therefore 10nanometers is the shortest length
For more information on length conversions, visit
https://brainly.com/subject/physics
Refer the attached photo
Answer:
A
Explanation:
since the wooden bat is an opaque object placed after a translucent object, light will come through the plastic sheet but will be unable to go through the bat. hence the dark shadow of the bat on a lit sheet
Two long, parallel wires carry currents in the same direction. If I1 = 10 A, and I2 = 20 A, and they are d = 1.0 m apart, what is the magnetic field at a point P midway between them?
Answer:
The magnetic field at mid point between two parallel wires is 1.2 x 10⁻⁵ T
Explanation:
Given;
current in the first wire, I₁ = 10 A
current in the second wire, I₂ = 20 A
distance between the two wires, d = 1.0 m
Magnetic field at mid point between two parallel wires is calculated as;
[tex]B = \frac{\mu_o I_1}{2\pi r} + \frac{\mu_o I_2}{2\pi r} \\\\B = \frac{\mu_o }{2\pi r}(I_1 +I_2)[/tex]
where;
r is the midpoint between the wires, = 0.5 m
μ₀ is the permeability of free space, = 4π x 10⁻⁷
[tex]B = \frac{\mu_o }{2\pi r}(I_1 +I_2)\\\\B = \frac{4\pi*10^{-7} }{2\pi *0.5}(10 +20)\\\\B = \frac{4\pi*10^{-7} *30}{2\pi *0.5}\\\\B = 1.2 *10^{-5} \ T[/tex]
Therefore, the magnetic field at mid point between two parallel wires is 1.2 x 10⁻⁵ T
Wind gusts create ripples on the ocean that have a wavelength of 3.03 cm and propagate at 3.37 m/s. What is their frequency (in Hz)?
Answer:
Their frequency is 111.22 Hz
Explanation:
Wavelength is the minimum distance between two successive points on the wave that are in the same state of vibration and is expressed in units of length (m).
Frequency is the number of vibrations that occur in a unit of time. Its unit is s⁻¹ or hertz (Hz).
The propagation speed of a wave is the quantity that measures the speed at which the wave's disturbance propagates throughout its displacement. The speed at which the wave propagates depends on both the type of wave and the medium through which it propagates. Relate wavelength (λ) and frequency (f) inversely proportional using the following equation:
v = f * λ.
Then the frequency can be calculated as: f=v÷λ
In this case:
λ=3.03 cm=0.0303 m (1m=100 cm)v= 3.37 m/sReplacing:
[tex]f=\frac{3.37 \frac{m}{s} }{0.0303 m}[/tex]
Solving:
f=111.22 Hz
Their frequency is 111.22 Hz
At what temperature will silver have a resistivity that is two times the resistivity of iron at room temperature? (Assume room temperature is 20° C.)
Answer:
The temperature of silver at this given resistivity is 2971.1 ⁰C
Explanation:
The resistivity of silver is calculated as follows;
[tex]R_t = R_o[1 + \alpha(T-T_o)]\\\\[/tex]
where;
Rt is the resistivity of silver at the given temperature
Ro is the resistivity of silver at room temperature
α is the temperature coefficient of resistance
To is the room temperature
T is the temperature at which the resistivity of silver will be two times the resistivity of iron at room temperature
[tex]R_t = R_o[1 + \alpha(T-T_o)]\\\\\R_t = 1.59*10^{-8}[1 + 0.0038(T-20)][/tex]
Resistivity of iron at room temperature = 9.71 x 10⁻⁸ ohm.m
When silver's resistivity becomes 2 times the resistivity of iron, we will have the following equations;
[tex]R_t,_{silver} = 2R_o,_{iron}\\\\1.59*10^{-8}[1 + 0.0038(T-20)] =(2 *9.71*10^{-8})\\\\\ \ (divide \ through \ by \ 1.59*10^{-8})\\\\1 + 0.0038(T-20) = 12.214\\\\1 + 0.0038T - 0.076 = 12.214\\\\0.0038T +0.924 = 12.214\\\\0.0038T = 12.214 - 0.924\\\\0.0038T = 11.29\\\\T = \frac{11.29}{0.0038} \\\\T = 2971.1 \ ^0C[/tex]
Therefore, the temperature of silver at this given resistivity is 2971.1 ⁰C
find the value of k for which the given pair of vectors are not equal
2ki +3j and 8i + 4kj
Answer:
5
Explanation:
You have a circuit of three resistors in series connected to a battery. You add a fourth resistor, also in series, to the combination. As a result:_______.
A. Power delivered from the battery to combination increases.
B. It is impossible to give the answer without knowing the actual resistances and voltage of the battery.
C. Power delivered from the battery to combination is unchanged.
D. Power delivered from the battery to combination decreases.
Answer:
D
Explanation:
The power equation is P= V^2/R
Please let me know if this helped! Please rate it the brainlist if possible!
As a result of the given scenario, power delivered from the battery to combination decreases. The correct option is D.
What is a resistors?A resistor is a two-terminal passive electrical component that uses electrical resistance as a circuit element.
Resistors are used in electronic circuits to reduce current flow, adjust signal levels, divide voltages, and bias active elements.
A resistor is a component of an electronic circuit that limits or regulates the flow of electrical current. Resistors can also be used to supply a fixed voltage to an active device such as a transistor.
The current through resistors is the same when they are connected in series. The battery voltage is divided among resistors.
Adding more resistors to a series circuit increases total resistance and thus lowers current. However, in a parallel circuit, adding more resistors in parallel creates more options while decreasing total resistance.
Thus, the correct option is D.
For more details regarding resistors, visit:
https://brainly.com/question/24297401
#SPJ5
A projectile is launched from ground level with an initial speed of 47 m/s at an angle of 0.6 radians above the horizontal. It strikes a target 1.7 seconds later. What is the vertical distance from where the projectile was launched to where it hit the target.
Answer:
30.67m
Explanation:
Using one of the equations of motion as follows, we can describe the path of the projectile in its horizontal or vertical displacement;
s = ut ± [tex]\frac{1}{2} at^2[/tex] ------------(i)
Where;
s = horizontal/vertical displacement
u = initial horizontal/vertical component of the velocity
a = acceleration of the projectile
t = time taken for the projectile to reach a certain horizontal or vertical position.
Since the question requires that we find the vertical distance from where the projectile was launched to where it hit the target, equation (i) can be made more specific as follows;
h = vt ± [tex]\frac{1}{2} at^2[/tex] ------------(ii)
Where;
h = vertical displacement
v = initial vertical component of the velocity = usinθ
a = acceleration due to gravity (since vertical motion is considered)
t = time taken for the projectile to hit the target
From the question;
u = 47m/s, θ = 0.6rads
=> usinθ = 47 sin 0.6
=> usinθ = 47 x 0.5646 = 26.54m/s
t = 1.7s
Take a = -g = -10.0m/s (since motion is upwards against gravity)
Substitute these values into equation (ii) as follows;
h = vt - [tex]\frac{1}{2} at^2[/tex]
h = 26.54(1.7) - [tex]\frac{1}{2} (10)(1.7)^2[/tex]
h = 45.118 - 14.45
h = 30.67m
Therefore, the vertical distance is 30.67m
A medieval city has the shape of a square and is protected by walls with length 500 m and height 15 m. You are the commander of an attacking army and the closest you can get to the wall is 100 m. Your plan is to set fire to the city by catapulting heated rocks over the wall (with an initial speed of 80 m/s). At what range of angles should you tell your men to set the catapult? (Assume the path of the rocks is perpendicular to the wall. Round your answers to one decimal place. Use g ≈ 9.8 m/s2. Enter your answer using interval notation. Enter your answer in terms of degrees without using a degree symbol.)
Answer:
θ₁ = 85.5º θ₂ = 12.98º
Explanation:
Let's analyze this projectile launch problem, the catapults are 100 m from the wall 15 m high, the objective is for the walls, let's look for the angles for which the rock stops touching the wall.
Let's write the equations for motion for this point
X axis
x = v₀ₓ t
x = v₀ cos θ t
Y axis
y = [tex]v_{oy}[/tex] t - ½ g t2
y = v_{o} sin θ t - ½ g t²
let's substitute the values
100 = 80 cos θ t
15 = 80 sin θ t - ½ 9.8 t²
we have two equations with two unknowns, so the system can be solved
let's clear the time in the first equation
t = 100/80 cos θ
15 = 80 sin θ (10/8 cos θ) - 4.9 (10/8 cos θ)²
15 = 100 tan θ - 7.656 sec² θ
we can use the trigonometric relationship
sec² θ = 1- tan² θ
we substitute
15 = 100 tan θ - 7,656 (1- tan² θ)
15 = 100 tan θ - 7,656 + 7,656 tan² θ
7,656 tan² θ + 100 tan θ -22,656=0
let's change variables
tan θ = u
u² + 13.06 u + 2,959 = 0
let's solve the quadratic equation
u = [-13.06 ±√(13.06² - 4 2,959)] / 2
u = [13.06 ± 12.599] / 2
u₁ = 12.8295
u₂ = 0.2305
now we can find the angles
u = tan θ
θ = tan⁻¹ u
θ₁ = 85.5º
θ₂ = 12.98º
A friend throws a heavy ball toward you while you are standing on smooth ice. You can either catch the ball or deflect it back toward your friend. What should you do in order to maximize your speed right after your interaction with the ball?
A. You should catch the ball.
B. You should let the ball go past you without touching it.
C. You should deflect the ball back toward your friend.
D. More information is required to determine how to maximize your speed.
E. It doesn't matter. Your speed is the same regardless of what you do.
Answer:
C You should deflect the ball back toward your friend.
Explanation:
This is because it would result in a completely inelastic collision, and the final velocity of me would be found using,
with m= mass, V=velocity, i=initial, f=final:
mV(me,i) +mV(ball,i) = [m(me)+m(b)]V(f)
So V(f) would be just the momentum of the ball divided by just MV mass of the ball and it will be higher resulting in inelastic collision
Answer:
A. You should catch the ball.
Explanation:
Catching the ball maximizes your speed by converting most of the momentum of the flying ball into the momentum of you and the ball. Since the ice is smooth, the friction between your feet and the ice is almost negligible, meaning less energy is needed to set your body in motion. Catching the ball means that you and the ball undergoes an inelastic collision, and part of the kinetic energy of the ball is transferred to you, setting you in motion. Deflecting the ball will only give you a relatively small speed compared to catching the ball.
An amusement park ride has a vertical cylinder with an inner radius of 3.4 m, which rotates about its vertical axis. Riders stand inside against the carpeted surface and rotate with the cylinder while it accelerates to its full angular velocity. At that point the floor drops away and friction between the riders and the cylinder prevents them from sliding downward. The coefficient of static friction between the riders and the cylinder is 0.87. What minimum angular velocity in radians/second is necessary to assure that the riders will not slide down the wall?
Answer:
The minimum angular velocity necessary to assure that the riders will not slide down the wall is 1.58 rad/second.
Explanation:
The riders will experience a centripetal force from the cylinder
[tex]F_{C}[/tex] = mrω^2 .... equ 1
where
m is the mass of the rider
r is the inner radius of the cylinder = 3.4 m
ω is the angular speed of of the rider
For the riders not to slide downwards, this centripetal force is balanced by the friction between the riders and the cylinder. The frictional force is given as
[tex]F_{f}[/tex] = μR ....equ 2
where
μ = coefficient of friction = 0.87
R is the normal force from the rider = mg
where
m is the rider's mass
g is the acceleration due to gravity = 9.81 m/s
substitute mg for R in equ 2, we'll have
[tex]F_{f}[/tex] = μmg ....equ 3
Equating centripetal force of equ 1 and frictional force of equ 3, we'll get
mrω^2 = μmg
the mass of the rider cancels out, and we are left with
rω^2 = μg
ω^2 = μg/r
ω = [tex]\sqrt{\frac{ug}{r} }[/tex]
ω = [tex]\sqrt{\frac{0.87*9.81}{3.4} }[/tex]
ω = 1.58 rad/second
The minimum angular velocity necessary so that the riders will not slide down the wall is 1.58 rad/s
The riders will experience a centripetal force from the cylinder
[tex]F = mrw^2[/tex]
where m is the mass of the rider
r is the inner radius of the cylinder = 3.4 m
ω is the angular speed of the rider
For the riders not to slide downwards, this centripetal force must be balanced by friction. The frictional force is given as
f = μN
where
μ = coefficient of friction = 0.87
N is the normal force = mg
f = μmg
Equating centripetal force of and frictional force of we'll get
[tex]mrw^2 = umg[/tex]
[tex]rw^2 = ug[/tex]
[tex]w^2 = ug/r[/tex]
[tex]w= \sqrt{ug/r}[/tex]
[tex]w= \sqrt{0.87*9.8/3.4}[/tex]
ω = 1.58 rad/s is the minimum angular velocity needed to prevent the rider from sliding.
Learn more:
https://brainly.com/question/24638181
Transverse waves are sent along a 4.50 m long string with a speed of 85.00 m/s. The string is under a tension of 20.00 N. What is the mass of the string (in kg)?
Answer:
m = 0.0125 kg
Explanation:
Let us apply the formula for the speed of a wave on a string that is under tension:
[tex]v = \sqrt{\frac{F}{\mu} }[/tex]
where F = tension force
μ = mass per unit length
Mass per unit length is given as:
μ = m / l
where m = mass of the string
l = length of the string
This implies that:
[tex]v = \sqrt{\frac{F}{m/l} }\\ \\v = \sqrt{\frac{F * l}{m} }[/tex]
Let us make mass, m, the subject of the formula:
[tex]v^2 = \frac{F * l}{m}\\\\m = \frac{F * l}{v^2}[/tex]
From the question:
F = 20 N
l = 4.50 m
v = 85 m/s
Therefore:
[tex]m = \frac{20 * 4.5}{85^2}\\\\m = \frac{90}{7225}\\ \\m = 0.0125 kg[/tex]
A rubber ball is attached to a string and whirled around in a circle. If the string is 1.0 m long (measured from the center of the baseball to the far end of the string) and the ball’s speed is 10 m/s, what is the ball’s centripetal acceleration?
Centripetal acceleration = (speed squared) / (radius)
Centripetal acceleration = (10 m/s)² / (1.0 m)
Centripetal acceleration = (100 m²/s²) / (1.0 m)
Centripetal acceleration = 100 m/s²
If you're swimming underwater and knock two rocks together, you will hear a very loud noise. But if your friend above the water knocks two rocks together, you'll barely hear the sound.
Match the words.
The air-water interface is an example of boundary. The( )portion of the initial wave energy is way smaller than the( )portion. This makes the( ) wave hard to hear.
When both the source of the sound and your ears are located underwater, the sound is louder because the sound waves can( ) .
1. reflect more efficiently
2. transmitted
3. travel directly to your ears
4. boundary
5. reflected
6. discontinuity
Answer:
The air-water interface is an example of boundary. The transmitted portion of the initial wave energy is way smaller than the reflected portion. This makes the boundary wave hard to hear.
When both the source of the sound and your ears are located underwater, the sound is louder because the sound waves can travel directly to your ear.
Explanation:
The air-to-water sound wave transmission is inhibited because more of reflection than transmission of the wave occurs at the boundary. In the end, only about 30% of the sound wave eventually reaches underwater. For sound generated underwater, all the wave energy is transmitted directly to the observer. Sound wave travel faster in water than in air because, the molecules of water are more densely packed together, and hence can easily transmit their vibration to their neighboring molecules, when compared to air.
Answer: The air-water interface is an example of boundary. The (transmitted) portion of the initial wave is way smaller than the (reflected) portion. This makes the (transmitted) wave hard to hear.
When both the source of the sound and your ears are located underwater, the sound is louder because the sound waves can (travel directly to your ears.)
Explanation:
The part of the sound wave that is transmitted across the boundary between air and water is much smaller than the part of the wave that is reflected. This is what makes it hard to hear your friend knocking two rocks together above the surface.
When you and the rocks are underwater, the sound that comes from knocking the rocks together can travel directly to your ears rather than having to be transmitted across mediums.
A rod has length 0.900 mm and mass 0.500 kgkg and is pivoted at one end. The rod is not uniform; the center of mass of the rod is not at its center but is 0.500 mm from the pivot. The period of the rod's motion as a pendulum is 1.49 ss. What is the moment of inertia of the rod around the pivot
Answer:
The moment of inertia is [tex]I =0.14 \ kg \cdot m^2[/tex]
Explanation:
From the question we are told that
The length of the rod is [tex]l = 0.900 \ m[/tex]
The mass of the rod is [tex]m = 0.500 \ kg[/tex]
The distance of the center of mass from the pivot is [tex]d = 0.500 \ m[/tex]
The period of the rod's motion is [tex]T = 1.49 \ s[/tex]
Generally the period of the motion is mathematically represented as
[tex]T = 2 \pi * \sqrt{\frac{I}{m* g * d} }[/tex]
Where [tex]I[/tex] is the moment of inertia about the pivot so making [tex]I[/tex] the subject of formula
[tex]I = [\frac{T}{2\pi } ]^2 * m * g * d[/tex]
substituting values
[tex]I = [\frac{1.49}{2* 3.142 } ]^2 * 0.5 * 9.8 * 0.5[/tex]
[tex]I =0.14 \ kg \cdot m^2[/tex]
What is the change in internal energy of an engine if you put 15 gallon of gasoline into its tank? The energy content of gasoline is 1.5 x 106 J/gallon. All other factors, such as the engine’s temperature, are constant. How many hours the engine can work if the power of the engine’s motor is 600 W? (8 marks)
Answer:
ΔU = 2.25 x 10⁸ J
t = 104.17 s
Explanation:
The change in internal energy of the engine can be given by the following formula:
ΔU = (Mass of Gasoline)(Energy Content of Gasoline)
ΔU = (1.5 x 10⁶ J/gallon)(15 gallon)
ΔU = 2.25 x 10⁸ J
Now, for the time of operation, we use the following formula of power.
P = W/t = ΔU/t
t = ΔU/P
where,
t = time of operation = ?
ΔU = Change in internal energy = 2.25 x 10⁸ J
P = Power of motor = 600 W
Therefore,
t = (2.25 x 10⁸ J)/(600 W)
t = (375000 s)(1 h/3600 s)
t = 104.17 s
An electron, moving west, enters a magnetic field of a certain strength. Because of this field the electron curves upward. What is the direction of the magnetic field?
Answer:
Towards the west.
Explanation:
The direction of a magnetic field lines is the direction north end of a compass needle points. The magnetic field exert force on positive charge.
Using the magnetic rule,which indicate that in order to find the direction of magnetic force on a moving charge, the thumb of the right hand point in the direction of force, the index finger in the direction of velocity charge and the middle finger in the direction of magnetic field.
According to the right hand rule, the electron moving moving west which is the thumb, the direction of the electron is west which is the middle finger and it is upward