Answer:
Software Updates, Computing Sources, No Coding, Relatively Inexpensive, Safeguards Data.
Explanation:
Similar to Wi-Fi, ____ is designed to provide internet access to fixed locations (sometimes called hot zones), but the coverage is significantly larger
Answer:
WiMAX.
Explanation:
WiMAX is an acronym for Worldwide Interoperability for Microwave Access, it is a wireless communications which is primarily based on the IEEE 802.16 standards for creating Metropolitan Area Network (MAN) for the internet users.
Similar to Wi-Fi, WiMAX is designed to provide internet access to fixed locations (sometimes called hot zones), but the coverage is significantly larger.
WiMAX is capable of covering large metropolitan distance of several kilometers while Wi-Fi covers just a local (short) area measured in meters.
Generally, WiMAX was invented by the WiMAX forum and is a telecommunications standard protocol that provides fixed and fully mobile internet access services over a wide range.
Rosseta Technologies, an information technology service provider to a company based out of Germany, allows its employees to work from home twice a month. Its major concern is the leakage of confidential data from the laptops or an employee making copies of sensitive files on his personal laptop. Which of the following would help the firm enforce access controls and storage guidelines on its laptops?
a. Anenterprise search software
b. A binary search tool
c. A perceptive software pack
d. A Domain search engine
Answer:
a. An enterprise search software.
Explanation:
In this scenario, Rosseta Technologies, an information technology service provider to a company based out of Germany, allows its employees to work from home twice a month. In order to prevent the leakage of confidential data from the laptops or an employee making copies of sensitive files on his personal laptop, Rosetta technologies should use an enterprise search software.
Enterprise search software is a computer application which is typically used to make relevant data from sources, such as a database, file system and intranet searchable to a specific or defined group of people.
An enterprise search software would help the firm enforce access controls and storage guidelines on its laptops.
On enterprise search software, there are basically two (2) ways to enforce access controls as a security policy on users;
1. Early binding: at the index stage, permissions are analyzed and ascribed to each document in the enterprise search software.
2. Late binding: it involves the process of analyzing permissions and ascribing them to each document at the query stage in the enterprise search software.
Consider these functions:_________.
def f(x) :
return g(x) + math.sqrt(h(x))
def g(x):
return 4 h(x)
def h(x):
return x x + k(x)-1
def k(x):
return 2 (x + 1)
Without actually compiling and running a program, determine the results of the following function calls.
a. x1 = f(2)
b. x2 = g(h(2)
c. x3 = k(g(2) + h(2))
d. x4 - f(0) + f(l) + f(2)
e. x5 - f{-l) + g(-l) + h(-1) + k(-l)
Answer:
x1 = 39
x2 = 400
x3 = 92
x4 = 62
x5 = 0
Explanation:
a. x1 = f(2)This statement calls the f() function passing 2 to the function. The f(x) function takes a number x as parameter and returns the following:
g(x) + math.sqrt(h(x))
This again calls function g() and h()
The above statement calls g() passing x i.e. 2 to the function g(x) and calls function h() passing x i.e. 2 to h() and the result is computed by adding the value returned by g() to the square root of the value returned by the h() method.
The g(x) function takes a number x as parameter and returns the following:
return 4*h(x)
The above statement calls function h() by passing value 2 to h() and the result is computed by multiplying 4 with the value returned by h().
The h(x) function takes a number x as parameter and returns the following:
return x*x + k(x)-1
The above statement calls function k() by passing value 2 to k() and the result is computed by subtracting 1 from the value returned by k() and adding the result of x*x (2*2) to this.
The k(x) function takes a number x as parameter and returns the following:
return 2 * (x + 1)
As the value of x=2 So
2*(2+1) = 2*(3) = 6
So the value returned by k(x) is 6
Now lets go back to the function h(x)
return x*x + k(x)-1
x = 2
k(x) = 6
So
x*x + k(x)-1 = 2*2 + (6-1) = 4 + 5 = 9
Now lets go back to the function g(x)
return 4*h(x)
As x = 2
h(x) = 9
So
4*h(x) = 4*9 = 36
Now lets go back to function f(x)
return g(x) + math.sqrt(h(x))
As x=2
g(x) = 36
h(x) = 9
g(x) + math.sqrt(h(x)) = 36 + math.sqrt(9)
= 36 + 3 = 39
Hence
x1 = 39b. x2 = g(h(2) )The above statement means that first the function g() calls function h() and function h() is passed a value i.e 2.
As x=2
The function k() returns:
2 * (x + 1) = 2 * (2 + 1) = 6
The function h() returns:
x*x + k(x)-1 = 2*2 + (6-1) = 4 + 5 = 9
Now The function g() returns:
4 * h(x) = 4 * h(9)
This method again calls h() and function h() calls k(). The function k() returns:
2 * (x + 1) = 2 * (9 + 1) = 20
Now The function h() returns:
x*x + k(x)-1 = 9*9 + (20-1) = 81 + 19 = 100
h(9) = 100
Now The function g() returns:
4 * h(x) = 4 * h(9) = 4 * 100 = 400
Hence
x2 = 400c. x3 = k(g(2) + h(2))g() returns:
return 4 h(x)
h() returns:
return x*x + k(x)-1
k(2) returns:
return 2 (x + 1)
= 2 ( 3 ) = 6
Now going back to h(2)
x * x + k(x)-1 = 2*2 + 6 - 1 = 9
Now going back to g(2)
4 h(x) = 4 * 9 = 36
So k(g(2) + h(2)) becomes:
k(9 + 36 )
k(45)
Now going to k():
return 2 (x + 1)
2 (x + 1) = 2(45 + 1)
= 2(46)
= 92
So k(g(2) + h(2)) = 92
Hence
x3 = 92d. x4 = f(0) + f(1) + f(2)Compute f(0)
f() returns:
return g(0) + math.sqrt(h(0))
f() calls g() and h()
g() returns:
return 4 * h(0)
g() calls h()
h() returns
return 0*0 + k(0)-1
h() calls k()
k() returns:
return 2 * (0 + 1)
2 * (0 + 1) = 2
Going back to caller function h()
Compute h(0)
0*0 + k(0)-1 = 2 - 1 = 1
Going back to caller function g()
Compute g(0)
4 * h(0) = 4 * 1 = 4
Going back to caller function f()
compute f(0)
g(0) + math.sqrt(h(0)) = 4 + 1 = 5
f(0) = 5
Compute f(1)
f() returns:
return g(1) + math.sqrt(h(1))
f() calls g() and h()
g() returns:
return 4 * h(1)
g() calls h()
h() returns
return 1*1 + k(1)-1
h() calls k()
k() returns:
return 2 * (1 + 1)
2 * (1 + 1) = 4
Going back to caller function h()
Compute h(0)
1*1 + k(1)-1 = 1 + 4 - 1 = 4
Going back to caller function g()
Compute g(1)
4 * h(1) = 4 * 4 = 16
Going back to caller function f()
compute f(1)
g(1) + math.sqrt(h(1)) = 16 + 2 = 18
f(1) = 18
Compute f(2)
f() returns:
return g(2) + math.sqrt(h(2))
f() calls g() and h()
g() returns:
return 4 * h(2)
g() calls h()
h() returns
return 1*1 + k(2)-1
h() calls k()
k() returns:
return 2 * (2+1)
2 * (3) = 6
Going back to caller function h()
Compute h(2)
2*2 + k(2)-1 = 4 + 6 - 1 = 9
Going back to caller function g()
Compute g(2)
4 * h(2) = 4 * 9 = 36
Going back to caller function f()
compute f(2)
g(2) + math.sqrt(h(2)) = 36 +3 = 39
f(1) = 13.7
Now
x4 = f(0) + f(l) + f(2)
= 5 + 18 + 39
= 62
Hence
x4 = 62e. x5 = f(-1) + g(-1) + h(-1) + k(-1)Compute f(-1)
f() returns:
return g(-1) + math.sqrt(h(-1))
f() calls g() and h()
g() returns:
return 4 * h(-1)
g() calls h()
h() returns
return 1*1 + k(-1)-1
h() calls k()
k() returns:
return 2 * (-1+1)
2 * (0) = 0
Going back to caller function h()
Compute h(-1)
-1*-1 + k(-1)-1 = 1 + 0 - 1 = 0
Going back to caller function g()
Compute g(-1)
4 * h(-1) = 4 * 0 = 0
Going back to caller function f()
compute f(-1)
g(-1) + math.sqrt(h(-1)) = 0
f(-1) = 0
Compute g(-1)
g() returns:
return 4 * h(-1)
g() calls h()
h() returns
return 1*1 + k(-1)-1
h() calls k()
k() returns:
return 2 * (-1+1)
2 * (0) = 0
Going back to caller function h()
Compute h(-1)
-1*-1 + k(-1)-1 = 1 + 0 - 1 = 0
Going back to caller function g()
Compute g(-1)
4 * h(-1) = 4 * 0 = 0
g(-1) = 0
Compute h(-1)
h() returns
return 1*1 + k(-1)-1
h() calls k()
k() returns:
return 2 * (-1+1)
2 * (0) = 0
Going back to caller function h()
Compute h(-1)
-1*-1 + k(-1)-1 = 1 + 0 - 1 = 0
h(-1) = 0
Compute k(-1)
k() returns:
return 2 (x + 1)
k(-1) = 2 ( -1 + 1 ) = 2 ( 0 ) = 0
k(-1) = 0
x5 = f(-1) + g(-1) + h(-1) + k(-1)
= 0 + 0 + 0 + 0
= 0
Hence
x5 = 0Some network applications defer configuration until a service is needed. For example, a computer can wait until a user attempts to print a document before the software searches for available printers.
What is the chief advantage of deferred configuration?
Answer:
The drivers wont be loaded and the deamons will not be running in the background unnecessarily, that makes the processes to run more faster
Explanation:
The chief advantage of deferred configuration or the advantage when some network applications defer configuration until a service is needed is that the drivers won't be loaded and the deamons will not be running in the background unnecessarily or when idle, that makes the processes to run more faster.
Network configuration is the activity which involves setting up a network's controls, flow and operation to assist the network communication of an organization or network owner.
What is cutting-edge technology
Answer:
Cutting-edge technology refers to technological devices, techniques or achievements that employ the most current and high-level IT developments; in other words, technology at the frontiers of knowledge. Leading and innovative IT industry organizations are often referred to as "cutting edge."
Explanation:
A printer is connected locally on Computer1 and is shared on the network. Computer2 installs the shared printer and connects to it. Computer1 considers the printer to be a(n) ________________ printer, and Computer2 considers the printer to be a(n) ________________ printer.
Answer:
A printer is connected locally on Computer1 and is shared on the network. Computer2 installs the shared printer and connects to it. Computer1 considers the printer to be a(n) _____local___________ printer, and Computer2 considers the printer to be a(n) _____network___________ printer.
Explanation:
Any printer installed directly to Computer 1 is a local printer. If this printer is then shared with computers 2 and 3 in a particular networked environment, it becomes a shared printer. For these other computers 2 and 3, the shared printer is a network printer, because it is not locally installed in each of them. There may be some features which network computers cannot use on a shared printer, especially if the printer can scan documents.
A company wants a recruiting app that models candidates and interviews; displays the total number of interviews on each candidate record; and defines security on interview records that is independent from the security on candidate records. What would a developer do to accomplish this task? Choose 2 answers
a. Create a roll -up summary field on the Candidate object that counts Interview records.
b. Create a master -detail relationship between the Candidate and Interview objects.
c. Create a lookup relationship between the Candidate and Interview objects.
d. Create a trigger on the Interview object that updates a field on the Candidate object.
Answer:
c. Create a lookup relationship between the Candidate and Interview objects.
d. Create a trigger on the Interview object that updates a field on the Candidate object.
Explanation:
Objects relationships is considered a form of field type that joins two or more objects together such that, after understanding objects and fields, it creates some form of bonding known as object relationships. This helps define security on interview records that is independent from the security on candidate records.
For an example, in a standard object like Account, where a sales representative opens an account, and has had interviews or chats with a few people at that account’s company, and as well made contacts with the likes of executives or IT managers and still stored those contacts’ information in salesforce.
Hence, what would a developer do to accomplish this task is to:
1. Create a lookup relationship between the Candidate and Interview objects.
2. Create a trigger on the Interview object that updates a field on the Candidate object.
Why is a DNS cache poisoning attack dangerous? Check all that apply. A. Errrr...it's not actually dangerous. B. It allows an attacker to redirect targets to malicious webservers. C. It allows an attacker to remotely controle your computer. D. It affects any clients querying the poisoned DNS server.
Answer:
(B) It allows an attacker to redirect targets to malicious webserver.
(D) It affects any clients querying the poisoned DNS server.
Explanation:
DNS cache poisoning is a serious type of attack that is designed to exploit the vulnerabilities inherent in a Domain Name Server (DNS) where a user is redirected from a real server to a fake one. It is also called DNS spoofing.
Normally, when your browser tries to visits a website through a given domain name, it goes through the DNS server. A DNS server maintains a list of domain names and their equivalent Internet Protocol addresses. This server (DNS) then responds to the request with one or more IP addresses for the browser to reach the website through the domain name.
The computer browser then get to the intended website through the IP address.
Now, if the DNS cache is poisoned, then it has a wrong entry for IP addresses. This might be via hacking or a physical access to the DNS server to modify the stored information on it. Therefore, rather than responding with the real IP address, the DNS replies with a wrong IP address which then redirects the user to an unreal website.
Although they might not be able to control your computer remotely as long as you are not trying to visit a web page via the poisoned information, there are other dangers attached to this type of attack.
Once the DNS server has been poisoned, any client trying to query the server will also be affected since there is no direct way of knowing if the information received from the server is actually correct.
Lily is in her first year of undergraduate coursework and has not yet declared a major. She has attended a lot of career fairs and undergraduate major "open house" events to investigate her options. Marcia's theory of identity status suggests that the dimension Lily is most concerned with is the_____of 1 dimension.
Answer:
exploration
Explanation:
According to Marcia's theory of identity, the status suggests that the dimension Lily is most concerned with is the exploration dimension.
James E. Marcia who came up with the Marcia's theory of identity is a clinical and developmental psychologist. He also once taught at Simon Fraser University which is located in British Columbia, Canada and also in the State University of New York at Buffalo in Upstate, New York City.
James E. Marcia is also very much involved in clinical private practice, community consultation, clinical psychology supervision, and also in international clinical-developmental research and teaching.
The dramatic growth in the number of power data centers, cell towers, base stations, recharge mobiles, and so on is damaging the environment because Radio Frequency Interference (RFI) is overcrowding specific areas of the electromagnetic spectrum.
A. True
B. False
Answer:
A. True
Explanation:
Radio frequency interference abbreviated RFI is radio interference that occurs as a result of radiation in radio frequency energy that usually causes electronic devices to malfunction. Radio frequency interference or RFI is given out or emitted by electrical devices or centres such as mobile phones, satellites or data centres which affects the environment by increasing heat and bringing about increased body temperature in humans
Define a method printAll() for class PetData that prints output as follows with inputs "Fluffy", 5, and 4444. Hint: Make use of the base class' printAll() method. Name: Fluffy, Age: 5, ID: 4444
Answer and Explanation:
public class petData
{
private int ageYears;
private String fullName;
private int IdNumber;
public void setName (String givenName)
{
fullName = givenName;
return;
}
public void setAge (int numYears)
{
ageYears = numYears;
return;
}
public void setID (int numID)
{
IdNumber = numID;
return;
}
public void printAll ()
{
System.out.print ("Name: " + fullName);
System.out.print (", Age: " + ageYears);
return;
}
}
From the above, we have defined a class petData, with methods setName, setAge, printAll. These methods all make use of the string variable fullName and integer variable ageYears. From the above, setName method sets fullName variable to name given to its string parameter givenName while setAge method does the same with the ageYears variable in initializing it. This is also done by the ID method. These variables are then used by printAll method in printing out the Name and age of the object which would be created with the petData class
E. g: petData dog= new petData();
Assuming a Stop-and-Wait system, if the bandwidth-delay product of a channel is 500 Mbps and 1 bit takes 25 milliseconds to make the roundtrip, what is the bandwidth-delay product? If the data packets are 2500 bits in length, what is the utilization?
Answer:
Bandwidth delay product = 2500 Kbits
Utilization = 0.02%
Explanation:
We proceed as follows;
From the question, we are given that
band width = 500 Mbps
The bandwidth-delay product is = 500 x 10^6 x 25 x 10^-3
= 2500 Kbits
The system can send 12500 Kbits during the time it takes for the data to go from the sender to the receiver and then back again.
However, the system sends only 2500 bits.
The the link utilization =
2500/(12500 x 10^3) = 0.02%
function of network security
Answer:ffffffffffffgggggg
Explanation:vvvc
What are the links between the operating systems, the software, and hardware components in the network, firewall, and IDS that make up the network defense implementation of the banks' networks.
Answer:
In several organizations, the operating system (OS) functions at the core of the personal computers in use and the servers. The OS ought to be secure from external threats to its stored data and other resources.
Explanation:
In this regard, Intrusion detection systems play a critical role in protecting the sensitive data, along with software firewalls. Hardware firewalls protect the hardware elements in the network (such as storage drivers etc), the IDS and as well as the IPS.
If distances are recorded as 4-bit numbers in a 500-router network, and distance vectors are exchanged 3 times/second, how much total bandwidth (in bps) is used by the distributed routing algorithm
Answer:
A total of 6,000 bps of bandwidth is used by the distributed routing algorithm
Explanation:
This is a bandwidth requirement question.
We proceed as follows;
To calculate the total number of bits for a routing table, we use the following formula;
Routing table=Number of routers * length of cost
we are given the following parameters from the question;
Number of routers = 500
length of cost = 4 bits
Routing table = 500*4
=2000
Hence, a routing table is 2000 bits in length.
Now we proceed to calculate the bandwidth required on each line using the formula below;
Bandwidth = no.of seconds * no.of bits in routing table
Bandwidth required on each line = 3*2000
=6000
A car can move, a crystal can grow, a fire alarm is sensitive and they are classified as non-living things. Explain?
Answer:
They are all controlled by something else. A car is controlled by humans. A crystal grows due to the temperature and climate. A fire alarm only rings when it senses smoke, which is caused by something else, usually humans.
Description:
Create a program that converts the number of miles that you walked on a hike to the number of feet that you walked.
Console:
Hike Calculator
How many miles did you walk?: 4.5
You walked 23760 feet.
Continue? (y/n): y
How many miles did you walk?: 2.5
You walked 13200 feet.
Continue? (y/n): n
Bye!
Specifications:
The program should accept a float value for the number of miles.
Store the code that gets user input and displays output in the main function.
There are 5280 feet in a mile.
Store the code that converts miles to feet in a separate function. This function should return an int value for the number of feet.
Assume that the user will enter a valid number of miles.
Answer:
The programming language is not stated (I'll answer using C++)
#include <iostream>
using namespace std;
int convert(float miles)
{
return miles * 5280;
}
int main() {
cout<<"Console:"<<endl;
cout<<"Hike Calculator"<<endl;
float miles;
char response;
cout<<"How many miles did you walk?. ";
cin>>miles;
cout<<"You walked "<<convert(miles)<<" feet"<<endl;
cout<<"Continue? (y/n): ";
cin>>response;
while(response == 'y')
{
cout<<"How many miles did you walk?. ";
cin>>miles;
cout<<"You walked "<<convert(miles)<<" feet"<<endl;
cout<<"Continue? (y/n): ";
cin>>response;
}
cout<<"Bye!";
return 0;
}
Explanation:
Here, I'll explain some difficult lines (one after the other)
The italicized represents the function that returns the number of feet
int convert(float miles)
{
return miles * 5280;
}
The main method starts here
int main() {
The next two lines gives an info about the program
cout<<"Console:"<<endl;
cout<<"Hike Calculator"<<endl;
float miles;
char response;
This line prompts user for number of miles
cout<<"How many miles did you walk?. ";
cin>>miles;
This line calls the function that converts miles to feet and prints the feet equivalent of miles
cout<<"You walked "<<convert(miles)<<" feet"<<endl;
This line prompts user for another conversion
cout<<"Continue? (y/n): ";
cin>>response;
This is an iteration that repeats its execution as long as user continue input y as response
while(response == 'y')
{
cout<<"How many miles did you walk?. ";
cin>>miles;
cout<<"You walked "<<convert(miles)<<" feet"<<endl;
cout<<"Continue? (y/n): ";
cin>>response;
}
cout<<"Bye!";
Multiply each element in origList with the corresponding value in offsetAmount. Print each product followed by a semicolon (no spaces). Ex: If the input is: 4 5 10 12 2 4 7 3 the output is: 8; 20;70; 36; 1 #include 2 3 int main(void) { 4 const int NUM_VALS = 4; 5 int origList[NUM_VALS]; 6 int offsetAmount [NUM_VALS]; 7 int i; 8 9 scanf("%d", &origList[0]); 10 scanf("%d", &origList[1]); 11 scanf("%d", &origList[2]); 12 scanf("%d", &origList[3]); 13 14 scanf("%d", &offsetAmount[0]); 15 scanf("%d", &offsetAmount[1]); 16 scanf("%d", &offsetAmount[2]); 17 scanf("%d", &offsetAmount[3]); 18 19 \* Your code goes here */ 20 21 printf("\n"); 22 23 return 0; 24
Answer:
Replace /* Your code goes here */ with
for(i =0; i<NUM_VALS; i++) {
printf("%d", origList[i]*offsetAmount[i]);
printf(";");
}
Explanation:
The first line is an iteration statement iterates from 0 till the last element in origList and offsetAmount
for(i =0; i<NUM_VALS; i++) {
This line calculates and print the product of element in origList and its corresponding element in offsetAmount
printf("%d", origList[i]*offsetAmount[i]);
This line prints a semicolon after the product has been calculated and printed
printf(";");
Iteration ends here
}
A byte addressable direct-mapped cache has 1024 blocks/lines, with each block having eight 32-bit words. How many bits are required for block offset, assuming a 32-bit address
Answer and Explanation:
"The inquiry as presented is not necessarily responsible. A word has been states as 32-bit. We need to ask if the frame is "byte-addressable" (From this we can access to get an 8-bit piece of information) or "text-addressable" (the smallest open lump is 32-bit) or maybe "half-word-addressable" (the tiny bundle of information it could reach to 16-bit).
To understand what the smallest request bit of a position is to let anyone know, you have to remember this.
You operate from base up at that stage. We will agree with the byte-addressable structure. Every reserved square at a certain point contains 8 words * (4 bytes/word) = 32 = 25 bytes, so the counterbalance seems to be 5 bits.
The history in a direct-mapped stored is the squares in reserves (12 bits for this position due to 212 = 4096). at a certain point, as you have seen, the tag is also one of the bits left behind.
As the reserve becomes increasingly cooperative. And a similar size remains. These are lesser bits on the list and more bits on the mark.'
When you sustain program implementation by staying true to the original design, it is termed A. Goals and objectives B. Program fidelity C. Program evaluation D. Program management
Answer:
Program fidelity
Explanation:
Complete the function ConvertToDecadesAndYears to convert totalYears to decades and years. Return decades and years using the TimeDecadesYears struct. Ex: 26 years is 2 decades and 6 years.
Answer:
It is a C++ program. The complete function ConvertToDecadesAndYears which takes totalYears as parameter and convert totalYears to decades and years is provided in the attached document.
Explanation:
The explanation is provided in the attached document.
The screenshot of the complete code along with its output is attached.
Write a C function check(x, y, n) that returns 1 if both x and y fall between 0 and n-1 inclusive. The function should return 0 otherwise. Assume that x, y and n are all of type int.
Answer:
See comments for line by line explanation (Lines that begins with // are comments)
The function written in C, is as follows:
//The function starts here
int check(x,y,n)
{
//This if condition checks if x and y are within range of 0 to n - 1
if((x>=0 && x<=n-1) && (y>=0 && y<=n-1))
{
//If the if conditional statement is true, the function returns 1
return 1;
}
else
{
//If the if conditional statement is false, the function returns 0
return 0;
}
//The if condition ends here
}
//The function ends here
Explanation:
Using SQL
Use the blog database
Write a SQL RIGHT OUTER JOIN statement that joins the user_id column from the blog.posts table, the name column of the blog.users table and the body column of the blog.posts table together
Answer:
Following are the code to this question:
/*using the select statement, that selects column name from the table blog.posts */
SELECT blog.posts.user_id, blog.posts.body, users.name/*column name user_id, body, name*/
FROM blog.posts/* use table name blog.posts*/
RIGHT OUTER JOIN users ON blog.posts.user_id = users.id;/*use right join that connect table through user_id*/
Explanation:
In the structured query language, RIGHT JOIN is used to recovers from both the right side of the table both numbers, although the left table has no sets. It also ensures that even if the 0 (null) documents are linked inside this left table, its entry will always return the outcome row, but still, the number of columns from its left table will be NULL.
In the above-given right join code, the select statements used that selects the column names "user_id, body, and the name" from the table "blog. posts" and use the right join syntax to connect the table through the id.
A signal travels from point A to point B. At point A, the signal power is 100 W. At point B, the power is 90 W. What is the attenuation in decibels?
Answer:
[tex]Attenuation = 0.458\ db[/tex]
Explanation:
Given
Power at point A = 100W
Power at point B = 90W
Required
Determine the attenuation in decibels
Attenuation is calculated using the following formula
[tex]Attenuation = 10Log_{10}\frac{P_s}{P_d}[/tex]
Where [tex]P_s = Power\ Inpu[/tex]t and [tex]P_d = Power\ outpu[/tex]t
[tex]P_s = 100W[/tex]
[tex]P_d = 90W[/tex]
Substitute these values in the given formula
[tex]Attenuation = 10Log_{10}\frac{P_s}{P_d}[/tex]
[tex]Attenuation = 10Log_{10}\frac{100}{90}[/tex]
[tex]Attenuation = 10 * 0.04575749056[/tex]
[tex]Attenuation = 0.4575749056[/tex]
[tex]Attenuation = 0.458\ db[/tex] (Approximated)
Velma is graduating from Ashford at the end of next year. After she completes her final class, she will reward herself for her hard work with a week-long vacation in Hawaii. But she wants to begin saving money for her trip now. Which of the following is the most effective way for Velma to save money each month?
This question is incomplete because the options are missing; here are the options for this question:
Which of the following is the most effective way for Velma to save money each month?
A. Automatically reroute a portion of her paycheck to her savings account.
B. Manually deposit 10% of her paycheck in her savings account.
C. Pay all of her bills and then place the remaining money in her savings account.
D. Pay all of her bills and then place the remaining money in her piggy bank.
The correct answer to this question is A. Automatically reroute a portion of her paycheck to her savings account.
Explanation:
In this case, Velma needs to consistently save money for her vacation as this guarantees she will have the money for the trip. This means it is ideal every month she contributes consistently to her savings for the vacation.
This can be better be achieved by automatically rerouting a part of her paycheck for this purpose (Option A) because in this way, every month the money for the vacations will increase and the amount of money will be consistent, which means Velma will know beforehand the money she will have for the vacation. Moreover, options such as using a piggy bank or paying the bills and using the rest for her savings, do not guarantee she will contribute to the savings every month, or she will have the money she needs at the end.
Jason has a part time job in the office of a construction company and is also a student at a community college. He often works on his homework during times when he is not busy at work because the office computer contains the software he needs to do his assignments and he hasn't been able to afford to purchase the software for his own personal computer. Which of these unacceptable uses typically included in a user access policy might he most likely be engaging in?
Complete Question:
Jason has a part time job in the office of a construction company and is also a student at a community college. He often works on his homework during times when he is not busy at work because the office computer contains the software he needs to do his assignments and he hasn't been able to afford to purchase the software for his own personal computer. Which of these unacceptable uses typically included in a user access policy might he most likely be engaging in?
1.Using the network to download software for personal use
2.Disclosing personal information about employees
3.Copying of copyrighted material
4.Using a network account for a purpose not specified by the owner’s job description
Answer:
4.Using a network account for a purpose not specified by the owner’s job description
Explanation:
The office computer is meant to be used for the owner's purpose only. By using the office computer to do his homework, even at a free hour, Jason is still violating his employer's asset for selfish purpose. Jason could obtain permission from his manager to use the office computer for his homework for a temporary period, until he could "afford to purchase the software for his own personal computer." The official permission can exempt him from being penalized for the violation. A written permission is more ideal in this case.
Write an object oriented Python script that does the following:
1. Connects to the Sakila database (mysql)
2. Adds a record to the database
3. Retrieves and displays a dataset that shows the newly added record
Answer:
ESCALAS MAYORES (D, E, G, A, B) Porfavor necesito ayuda,te lo agradecería muchísimo!!
Es urgente
Which are true of the Transmission Control Protocol (TCP)? Multiple answers: You can select more than one option A it supports full duplex communication B it has graceful connection shutdown C its connections are logical D its data is sent as a discrete messages E it is an end-to-end protocol
Answer:
A, B, C, D and E
Explanation:
Transmission Control protocol (TCP) is a protocol that describes how connections are made and maintained between devices in a network which will help applications in these devices communicate and transmit data.
The following are some of the features of TCP:
i. It supports full duplex communication: In other words, TCP allows for concurrent transmission of data in both directions.
ii. it has a graceful connection shutdown: TCP allows for graceful termination and closing of connection. This means that when there is no more data to be sent by any of the communicating devices, rather than just close connection from its end, it first informs the other device about its completion and asks if it's safe to close the connection. From there, if the other device then says it doesn't have any data to send either, they then reach a consensus to close the connection at their respective ends.
iii. Its connections are logical: TCP makes use of the reliability and flow control mechanisms which require that it initialize and maintain some status information for each stream of data. This status information containing sockets, sequence numbers and window sizes is called a logical connection.
iv. Data is sent as discrete messages: Like other discrete messages, the IP treats the data in TCP as discrete messages by placing them into the IP datagram and transmitting to the target host.
v. It is an end-to-end protocol: TCP governs the way data is transmitted between two devices at their respective ends to ensure reliable delivery. In other words, it is responsible for the transmission of data from a source to one or more destinations. It sits on the operating system of the source and also on the operating system(s) of the destination(s).
If the current date is Monday, February 26, 2017, what will be displayed by the alert dialog box after the following code executes? var thisDay = new Date(); alert(thisDay.toDateString());
Answer:
Mon Feb 26 2017
Explanation:
Since the current date is considered as Monday, February 26, 2017, thisDay will be set to that value.
The toDateString() method returns the first three letters of the name of the day (The first letter is capitalized), the first three letters of the name of the month (The first letter is capitalized), the day of the month as an integer, and the year as an integer (There are spaces between all)
A security administrator is investigating a report that a user is receiving suspicious emails. The user's machine has an old functioning modem installed. Which of the following security concerns need to be identified and mitigated? (Select TWO).
a) Vishing
b) Whaling
c) Spear phishing
d) Pharming
e) War dialing
f) Hoaxing
Answer:
Spear Phishing and War Dialing
Explanation:
So let's tackle these one at a time.
Vishing is simply any type of message (i.e., email, text, phone call, etc.) that appears to be from a trusted source but is not.
Whaling is simply a spear phishing attack of a high-value target such as a CEO or someone with high-level access at a company.
Spear phishing is simply a targeted phishing attack, usually towards a specific person or group of people. (Phishing attack is simply a social attack to try and gain unauthorized access to a resource).
Pharming is an attack that attempts to redirect website traffic to a fake site.
War dialing is a technique to automatically scan a list of numbers in an area in attempt to search for exposed modems, computers, board systems, or fax machines, in order to breach the network.
Hoaxing is simply a social attack that describes a serious threat in attempts to retrieve unauthorized access or money from a victim. (Think microsoft tech support scams)
Now that we have defined these things, let's identify the possible threats that need to be reported.
(a) Vishing? The sec admin report doesn't mention the source of the message so we cannot associate this one
(b) Whaling? The sec admin report says a user, implying someone not high up in the company, but doesn't say it's not someone high up. This is possible.
(c) Spear phishing? The sec admin report says a user, implying that only this user is being targeted so this is definitely valid.
(d) Pharming? The sec admin report says nothing about site redirection.
(e) War dialing? The sec admin report doesn't say anything about unauthorized scanning; however, it mentions the user has an old functioning modem, so this is possible.
(f) Hoaxing? The sec admin report doesn't mention a pop up in the email or the content of the email so we are uncertain.
Thus with these considerations, the two threats that are identified and need mitigation are Spear phishing and War Dialing/Whaling. Note that we aren't positive of the war dialing or whaling, but a case could be made for either; however, given the modem information, the question seems to indicate war dialing.