To find the launch angle for which the ratio of maximum height to range is equal to 4.2, we can use the equations of projectile motion. After calculating the angle, we can determine the range of the projectile, given an initial speed of 15 m/s.
Let's assume the launch angle of the projectile is θ. The maximum height (H) and the range (R) of the projectile can be calculated using the equations of projectile motion. The formula for the maximum height is H = (v^2 * sin^2θ) / (2 * g), where v is the initial speed and g is the acceleration due to gravity (approximately 9.8 m/s^2).
To find the range, we can use the formula R = (v^2 * sin2θ) / g. Now, we need to find the launch angle θ for which the ratio of maximum height to range is equal to 4.2. Mathematically, this can be expressed as H / R = 4.2.
By substituting the formulas for H and R, we have ((v^2 * sin^2θ) / (2 * g)) / ((v^2 * sin2θ) / g) = 4.2. Simplifying this equation, we get sinθ = (2 * 4.2) / (1 + 4.2^2).
Using the inverse sine function, we can find the launch angle θ. Once we have determined the launch angle, we can calculate the range using the formula R = (v^2 * sin2θ) / g, where v = 15 m/s and g = 9.8 m/s^2.
Learn more about launch angle here:
brainly.com/question/31237096
#SPJ11
Δ 1 12 Consider two parallel wires where 11 is 16.1 amps, and 12 is 29.3 amps. The location A is in the plane of the two wires and is 30.0 mm from the left wire and 13.9 mm from the right wire. Given the direction of current in each wire, what is the B-field at the location A in micro Teslas? (If the B-field points toward you, make it positive; if it points away from you, make it negative. Give answer as an integer with correct sign. Do not enter unit.)
The magnetic field (B-field) at location A is -3 micro Teslas.
To calculate the magnetic field at location A, we'll use the formula for the magnetic field created by a current-carrying wire. The formula states that the magnetic field is directly proportional to the current and inversely proportional to the distance from the wire.
For the left wire, the distance from A is 30.0 mm (or 0.03 meters), and the current is 16.1 amps. For the right wire, the distance from A is 13.9 mm (or 0.0139 meters), and the current is 29.3 amps.
Using the formula, we can calculate the magnetic field created by each wire individually. The B-field for the left wire is (μ₀ * I₁) / (2π * r₁), where μ₀ is the magnetic constant (4π × 10^(-7) T m/A), I₁ is the current in the left wire (16.1 A), and r₁ is the distance from A to the left wire (0.03 m). Similarly, the B-field for the right wire is (μ₀ * I₂) / (2π * r₂), where I₂ is the current in the right wire (29.3 A) and r₂ is the distance from A to the right wire (0.0139 m).
Calculating the magnetic fields for each wire, we find that the B-field created by the left wire is approximately -13.5 micro Teslas (pointing away from us), and the B-field created by the right wire is approximately +9.5 micro Teslas (pointing towards us). Since the B-field is a vector quantity, we need to consider the direction as well. Since the wires are parallel and carry currents in opposite directions, the B-fields will have opposite signs.
To find the net magnetic field at location A, we add the magnetic fields from both wires. (-13.5 + 9.5) ≈ -4 micro Teslas. Hence, the B-field at location A is approximately -4 micro Teslas, pointing away from us.
To learn more about magnetic field click here:
brainly.com/question/14848188
#SPJ11
A charge and discharge RC circuit is composed of a resistance and a capacitance = 0.1.
d) Identify true or false to the following statements
i) The time constant () of charge and discharge of the capacitor are equal (
ii) The charging and discharging voltage of the capacitor in a time are different (
iii) A capacitor stores electric charge ( )
iv) It is said that the current flows through the capacitor if it is fully charged ( )
i) True. The time constant (τ) of charge and discharge is determined by the product of resistance and capacitance, which is equal in this case.
ii) False. The charging and discharging voltages of the capacitor in an RC circuit are different; during charging, the voltage increases, and during discharging, it decreases.
iii) True. A capacitor stores electric charge by accumulating it on its plates when a voltage is applied.
iv) False. Once a capacitor is fully charged, no current flows through it. It acts as an open circuit, blocking the flow of current.
i) True. The time constant (τ) of a charge and discharge RC circuit is determined by the product of the resistance (R) and capacitance (C), τ = RC. Since the resistance and capacitance values are the same in this case (0.1), the time constant for charging and discharging will be equal.
ii) False. The charging and discharging voltages of the capacitor in a RC circuit are different. During charging, the voltage across the capacitor gradually increases from 0 to the input voltage, while during discharging, the voltage decreases from the initial voltage to 0.
iii) True. A capacitor is an electronic component that stores electric charge. When a voltage is applied across its terminals, the capacitor accumulates charge on its plates, creating an electric field between them.
iv) False. Once a capacitor is fully charged, ideally no current flows through it. In an ideal capacitor, current flows only during the charging and discharging process. Once the capacitor reaches its maximum voltage, the current becomes zero, and the capacitor acts as an open circuit, blocking the flow of current.
Read more on capacitors here: https://brainly.com/question/30529897
#SPJ11
Show that x(t) = xm exp(-ßt) exp(±iwt) is a solution of the equation m kx = 0, where w and are defined by functions of m, k, and b. (10 pts) Show that y(x, t) = ym exp(i(kx ± wt)) is a solution of the wave equation dx² where v = w/k. (10 pts) d²y1d²y v² dt²³
The equation is satisfied, as both sides are equal. Therefore, y(x, t) = ym exp(i(kx ± wt)) is a solution of the wave equation d²y/dx² = (1/v²) d²y/dt², where v = w/k.
To show that x(t) = xm exp(-ßt) exp(±iwt) is a solution of the equation m kx = 0, where w and β are defined by functions of m, k, and b, we need to substitute x(t) into the equation and verify that it satisfies the equation.
Starting with the equation m kx = 0, let's substitute x(t) = xm exp(-βt) exp(±iwt):
m k (xm exp(-βt) exp(±iwt)) = 0
Expanding and rearranging the terms:
m k xm exp(-βt) exp(±iwt) = 0
Since xm, exp(-βt), and exp(±iwt) are all non-zero, we can divide both sides by them:
m k = 0
The equation angular frequency reduces to 0 = 0, which is always true. Therefore, x(t) = xm exp(-βt) exp(±iwt) satisfies the equation m kx = 0.
Now let's move on to the second part of the question.
To show that y(x, t) = ym exp(i(kx ± wt)) is a solution of the wave function equation d²y/dx² = (1/v²) d²y/dt², where v = w/k, we need to substitute y(x, t) into the wave equation and verify that it satisfies the equation.
Starting with the wave equation:
d²y/dx² = (1/v²) d²y/dt²
Substituting y(x, t) = ym exp(i(kx ± wt)):
d²/dx² (y m exp(i(kx ± wt))) = (1/v²) d²/dt² (ym exp(i(kx ± wt)))
Taking the second derivative with respect to x:
-(k² ym exp(i(kx ± wt))) = (1/v²) d²/dt² (ym exp(i(kx ± wt)))
Expanding the second derivative with respect to t:
-(k² ym exp(i(kx ± wt))) = (1/v²) (ym (-w)² exp(i(kx ± wt)))
Simplifying:
-(k² ym exp(i(kx ± wt))) = (-w²/v²) ym exp(i(kx ± wt))
Dividing both sides by ym exp(i(kx ± wt)):
-k² = (-w²/v²)
Substituting v = w/k:
-k² = -w²/(w/k)²
Simplifying:
-k² = -w²/(w²/k²)
-k² = -k²
The equation is satisfied, as both sides are equal. Therefore, y(x, t) = ym exp(i(kx ± wt)) is a solution of the wave equation d²y/dx² = (1/v²) d²y/dt², where v = w/k.
To know more about angular frequency:
https://brainly.com/question/33195438
#SPJ4
In the following three scenarios, an object is located on one side of a converging lens. In each case, you must determine if the lens forms an image of this object. If it does, you also must determine the following.whether the image is real or virtual
whether the image is upright or inverted
the image's location, q
the image's magnification, M
The focal length is
f = 60.0 cm
for this lens.
Set both q and M to zero if no image exists.
Note: If q appears to be infinite, the image does not exist (but nevertheless set q to 0 when entering your answers to that particular scenario).
(a)
The object lies at position 60.0 cm. (Enter the value for q in cm.)
q= cmM=
Select all that apply to part (a).
realvirtualuprightinvertedno image
(b)
The object lies at position 7.06 cm. (Enter the value for q in cm.)
q= cmM=
Select all that apply to part (b).
realvirtualuprightinvertedno image
(c)
The object lies at position 300 cm. (Enter the value for q in cm.)
q= cmM=
Select all that apply to part (c).
realvirtualuprightinvertedno image
The image is real, it is inverted. Here's how you can determine whether a lens forms an image of an object, whether the image is real or virtual, upright or inverted, the image's location (q), and the image's magnification (M).
In the following scenarios, an object is placed on one side of a converging lens. Here are the solutions:
(a) The object is located at a distance of 60.0 cm from the lens. Given that f = 60.0 cm, the lens's focal length is equal to the distance between the lens and the object. As a result, the image's location (q) is equal to 60.0 cm. The magnification (M) is determined by the following formula:
M = - q / p
= f / (p - f)
In this case, p = 60.0 cm, so:
M = - 60.0 / 60.0 = -1
Thus, the image is real, inverted, and the same size as the object. So the answers for part (a) are:q = -60.0 cmM = -1real, inverted
.(b) The object is located 7.06 cm away from the lens. For a converging lens, the distance between the lens and the object must be greater than the focal length for a real image to be created. As a result, a virtual image is created in this scenario. Using the lens equation, we can calculate the image's location and magnification.
q = - f . p / (p - f)
q = - (60 . 7.06) / (7.06 - 60)
q = 4.03cm
The magnification is calculated as:
M = - q / p
= f / (p - f)
M = - 4.03 / 7.06 - 60
= 0.422
As the image is upright and magnified, it is virtual. Thus, the answers for part (b) are:
q = 4.03 cm
M = 0.422 virtual, upright.
(c) The object is located at a distance of 300 cm from the lens. Since the object is farther away than the focal length, a real image is formed. Using the lens equation, we can calculate the image's location and magnification.
q = - f . p / (p - f)
q = - (60 . 300) / (300 - 60)
q = - 50 cm
The magnification is calculated as:
M = - q / p
= f / (p - f)M
= - (-50) / 300 - 60
= 0.714
As the image is real, it is inverted. Thus, the answers for part (c) are:
q = -50 cmM = 0.714real, inverted.
To know more about lens visit:
https://brainly.com/question/29834071
#SPJ11
In the figure, two concentric circular loops of wire carrying current in the same direction lie in the same plane. Loop 1 has radius 1.30 cm and carries 4.40 mA. Loop 2 has radius 2.30 cm and carries 6.00 mA. Loop 2 is to be rotated about a diameter while the net magnetic field B→B→ set up by the two loops at their common center is measured. Through what angle must loop 2 be rotated so that the magnitude of the net field is 93.0 nT? >1 2
Loop 2 must be rotated by approximately 10.3 degrees in order to achieve a net magnetic field magnitude of 93.0 nT at the common center of the loops.
To determine the angle of rotation, we need to consider the magnetic fields produced by each loop at their common center. The magnetic field produced by a current-carrying loop at its center is given by the formula:
B = (μ0 * I * A) / (2 * R)
where μ0 is the permeability of free space (4π × 10^-7 T•m/A), I is the current, A is the area of the loop, and R is the radius of the loop.
The net magnetic field at the common center is the vector sum of the magnetic fields produced by each loop. We can calculate the net magnetic field magnitude using the formula:
Bnet = √(B1^2 + B2^2 + 2 * B1 * B2 * cosθ)
where B1 and B2 are the magnitudes of the magnetic fields produced by loops 1 and 2, respectively, and θ is the angle of rotation of loop 2.
Substituting the given values, we have:
Bnet = √((4π × 10^-7 T•m/A * 4.40 × 10^-3 A * π * (0.013 m)^2 / (2 * 0.013 m))^2 + (4π × 10^-7 T•m/A * 6.00 × 10^-3 A * π * (0.023 m)^2 / (2 * 0.023 m))^2 + 2 * 4π × 10^-7 T•m/A * 4.40 × 10^-3 A * 6.00 × 10^-3 A * π * (0.013 m) * π * (0.023 m) * cosθ)
Simplifying the equation and solving for θ, we find:
θ ≈ acos((Bnet^2 - B1^2 - B2^2) / (2 * B1 * B2))
Substituting the given values and the net magnetic field magnitude of 93.0 nT (93.0 × 10^-9 T), we can calculate the angle of rotation:
θ ≈ acos((93.0 × 10^-9 T^2 - (4π × 10^-7 T•m/A * 4.40 × 10^-3 A * π * (0.013 m)^2 / (2 * 0.013 m))^2 - (4π × 10^-7 T•m/A * 6.00 × 10^-3 A * π * (0.023 m)^2 / (2 * 0.023 m))^2) / (2 * (4π × 10^-7 T•m/A * 4.40 × 10^-3 A * π * (0.013 m) * 4π × 10^-7 T•m/A * 6.00 × 10^-3 A * π * (0.023 m)))
Calculating the value, we find:
θ ≈ 10.3 degrees
Therefore, loop 2 must be rotated by approximately 10.3 degrees in order to achieve a net magnetic field magnitude of 93.0 nT at the common center of the loops.
Learn more about magnetic field here; brainly.com/question/30331791
#SPJ11
Consider a hydrogen atom placed in a region where is a weak external elec- tric field. Calculate the first correction to the ground state energy. The field is in the direction of the positive z axis ε = εk of so that the perturbation to the Hamiltonian is H' = eε x r = eεz where e is the charge of the electron.
To calculate the first correction to the ground state energy of a hydrogen atom in a weak external electric-field, we need to consider the perturbation to the Hamiltonian caused by the electric field.
The perturbation Hamiltonian is given by H' = eεz, where e is the charge of the electron and ε is the electric field strength. In first-order perturbation theory, the correction to the ground state energy (E₁) can be calculated using the formula:
E₁ = ⟨Ψ₀|H'|Ψ₀⟩
Here, Ψ₀ represents the unperturbed ground state wavefunction of the hydrogen atom.
In the case of the given perturbation H' = eεz, we can write the ground state wavefunction as Ψ₀ = ψ₁s(r), where ψ₁s(r) is the radial part of the ground state wavefunction.
Substituting these values into the equation, we have:
E₁ = ⟨ψ₁s(r)|eεz|ψ₁s(r)⟩
Since the electric field is in the z-direction, the perturbation only affects the z-component of the position operator, which is r = z.
Therefore, the first correction to the ground state energy can be calculated as:
E₁ = eε ⟨ψ₁s(r)|z|ψ₁s(r)⟩
To obtain the final result, the specific form of the ground state wavefunction ψ₁s(r) needs to be known, as it involves the solution of the Schrödinger equation for the hydrogen atom. Once the wavefunction is known, it can be substituted into the equation to evaluate the correction to the ground state energy caused by the weak external electric field.
To learn more about electric-field , click here : https://brainly.com/question/30544719
#SPJ11
A beam of x rays that have wavelength λ impinges on a solid surface at a 30∘ angle above the surface. These x rays produce a strong reflection. Suppose the wavelength is slightly decreased. To continue to produce a strong reflection, does the angle of the x-ray beam above the surface need to be increased, decreased, or maintained at 30∘?'
In order to maintain a strong reflection from the solid surface, the angle of the x-ray beam above the surface needs to be maintained at 30°.
The angle of incidence (the angle between the incident beam and the normal to the surface) determines the angle of reflection (the angle between the reflected beam and the normal to the surface). As per the law of reflection, the angle at which a beam of light or radiation approaches a surface is the same as the angle at which it is reflected.
When the wavelength of the x-rays is slightly decreased, it does not affect the relationship between the angle of incidence and the angle of reflection. Therefore, in order to continue producing a strong reflection, the angle of the x-ray beam above the surface should be maintained at 30°.
To learn more about wavelength: https://brainly.com/question/10750459
#SPJ11
3. Which of the following statements is true concerning the electric field (E) between two oppositely charged parallel plates of very large area, separated by a small distance, both with the same magnitude of charge? A. E must be zero midway between the plates. B. E has a larger magnitude midway between the plates than at either plate. C. E has a smaller magnitude midway between the plates than at either plate. a D. E has a larger magnitude near the (-) charged plate than near the (+) charged plate. E. E has a larger magnitude near the (+) charged plate than near the (-) charged plate. F. E has a constant magnitude and direction between the plates.
The correct option for the following statement is A. E must be zero midway between the plates. What is an electric field An electric field is a vector field that is generated by electric charges or time-varying magnetic fields. An electric field is defined as the space surrounding an electrically charged object in which electrically charged particles are affected by a force.
In other words, it is a region in which a charged object exerts an electric force on a nearby object with an electric charge. A positively charged particle in an electric field will experience a force in the direction of the electric field, while a negatively charged particle in an electric field will experience a force in the opposite direction of the electric field.
The magnitude of the electric field is determined by the quantity of charge on the charged object that created the electric field.
The electric field between two oppositely charged parallel plates of very large area, separated by a small distance, both with the same magnitude of charge is uniform in direction and magnitude.
The electric field is uniform between the plates, which means that the electric field has a constant magnitude and direction between the plates.
To know more about statement visit:
https://brainly.com/question/17238106
#SPJ11
A small rock is thrown vertically upward with a speed of 28.4 m/s from the edge of the roof of a 35.5 m tall building. The rock doesn't hit the building on its way back down and lands on the street below. Ignore air resistance. (a) What is the speed (in m/s ) of the rock just before it hits the street? (b) How much time (in sec) elapses from when the rock is thrown until it hits the street?
To determine the speed of the rock just before it hits the street, we need to apply the conservation of energy principle. The total energy of the rock is equal to the sum of its potential energy.
At the top of the building and its kinetic energy just before hitting the street. E_total = E_kinetic + E_potentialUsing the conservation of energy formula and the known values, E_total = E_kinetic + E_potential(1/2)mv² + mgh = mghence (1/2) v² = ghv = √2ghwhere m is the mass of the rock, v is its velocity, g is the acceleration due to gravity, and h is the height of the building.
The velocity of the rock just before hitting the street is 83.0 m/s. b) We can find the time taken by the rock to hit the street using the following kinematic equation, where is the displacement, Vi is the initial velocity, g is the acceleration due to gravity, and t is the time taken. From the equation, At the top of the building and g = 9.8 m/s². Solving the quadratic equation.
To know more about conservation visit:
https://brainly.com/question/9530080
#SPJ11
Next set the source velocity to 0.00 ms and the observer velocity to 5.00 m/s.
Set the source frequency to 650 Hz.
Set the speed of sound to 750 m/s.
a. What is the frequency of the sound perceived by the observer?
b. What is the wavelength of the sound perceived by the observer?
c. What is the wavelength of the sound source?
(a)The frequency of the sound perceived by the observer in this scenario is 628.13 Hz. (b)The wavelength of the sound perceived by the observer is 1.20 meters. (c) the wavelength of the sound source remains at its original value, which is 1.15 meters.
When the source velocity is set to 0.00 m/s and the observer velocity is 5.00 m/s, the observed frequency of the sound changes due to the Doppler effect. The formula to calculate the observed frequency is given by:
observed frequency = source frequency (speed of sound + observer velocity) / (speed of sound + source velocity)
Plugging in the given values, we get:
observed frequency = 650 Hz (750 m/s + 5.00 m/s) / (750 m/s + 0.00 m/s) = 628.13 Hz
This means that the observer perceives a sound with a frequency of approximately 628.13 Hz.
The wavelength of the sound perceived by the observer can be calculated using the formula:
wavelength = (speed of sound + source velocity) / observed frequency
Plugging in the values, we get:
wavelength = (750 m/s + 0.00 m/s) / 628.13 Hz = 1.20 meters
So, the observer perceives a sound with a wavelength of approximately 1.20 meters.
The wavelength of the sound source remains unchanged and can be calculated using the formula:
wavelength = (speed of sound + observer velocity) / source frequency
Plugging in the values, we get:
wavelength = (750 m/s + 5.00 m/s) / 650 Hz ≈ 1.15 meters
Hence, the wavelength of the sound source remains approximately 1.15 meters.
Learn more about wavelength click here:
brainly.com/question/31143857
#SPJ11
1. (1 p) An object has a kinetic energy of 275 J and a linear momentum of 25 kg m/s. Determine the speed and mass of the object.
An object has a kinetic energy of 275 J and a linear momentum of 25 kg m/s. The speed and mass of the object is 1.136 m/s and 22 kg respectively.
To determine the speed and mass of the object, we can use the formulas for kinetic energy and linear momentum.
Kinetic Energy (KE) = (1/2) × mass (m) × velocity squared (v²)
Linear Momentum (p) = mass (m) × velocity (v)
Kinetic Energy (KE) = 275 J
Linear Momentum (p) = 25 kg m/s
From the equation for kinetic energy, we can solve for velocity (v):
KE = (1/2) × m × v²
2 × KE = m × v²
2 × 275 J = m × v²
550 J = m × v²
From the equation for linear momentum, we have:
p = m × v
v = p / m
Plugging in the given values of linear momentum and kinetic energy, we have:
25 kg m/s = m × v
25 kg m/s = m × (550 J / m)
m = 550 J / 25 kg m/s
m = 22 kg
Now that we have the mass, we can substitute it back into the equation for velocity:
v = p / m
v = 25 kg m/s / 22 kg
v = 1.136 m/s
Therefore, the speed of the object is approximately 1.136 m/s, and the mass of the object is 22 kg.
To know more about kinetic energy here
https://brainly.com/question/999862
#SPJ4
Please Help
A simple ac circuit is composed of an inductor connected across the terminals of an ac power source. If the frequency of the source is halved, what happens to the reactance of the inductor? It is unch
When the frequency of an AC power source is halved in a simple AC circuit with an inductor, the reactance of the inductor increases.
The reactance of an inductor is directly proportional to the frequency of the AC power source. Reactance is the opposition that an inductor presents to the flow of alternating current. It is determined by the formula Xl = 2πfL, where Xl is the inductive reactance, f is the frequency, and L is the inductance.
When the frequency is halved, the value of f in the formula decreases. As a result, the inductive reactance increases. This means that the inductor offers greater opposition to the flow of current, causing the current to be impeded.
Halving the frequency of the AC power source effectively reduces the rate at which the magnetic field in the inductor changes, leading to an increase in the inductive reactance. It is important to consider this relationship between frequency and reactance when designing and analyzing AC circuits with inductors.
In conclusion, when the frequency of an AC power source is halved in a simple AC circuit with an inductor, the reactance of the inductor increases, resulting in greater opposition to the flow of current.
To know more about Frequency visit-
brainly.com/question/14320803
#SPJ11
A 3.0 kg falling rock has a kinetic energy equal to 2,430 J. What is its speed?
The speed of the falling rock can be determined by using the equation for kinetic energy: KE = 0.5 * m * v^2, the speed of the falling rock is approximately 40.25 m/s.
The kinetic energy of the rock is 2,430 J and the mass is 3.0 kg, we can rearrange the equation to solve for the speed:
v^2 = (2 * KE) / m
Substituting the given values:
v^2 = (2 * 2,430 J) / 3.0 kg
v^2 ≈ 1,620 J / kg
Taking the square root of both sides, we find:
v ≈ √(1,620 J / kg)
v ≈ 40.25 m/s
Therefore, the speed of the falling rock is approximately 40.25 m/s.
Learn more about mass here:
brainly.com/question/11954533
#SPJ11
At what temperature will the root mean square speed of carbon dioxide(CO2) be 450 m/s?( z=8 and n=8 for Oxygen atoms, z =6, n=6 for carbon)
Based on the given information at approximately 1.624 x [tex]10^{6}[/tex] Kelvin, the root mean square speed of carbon dioxide (CO2) will be 450 m/s.
To calculate the temperature at which the root mean square (rms) speed of carbon dioxide (CO2) is 450 m/s, we can use the kinetic theory of gases. The root mean square speed can be related to temperature using the formula:
v_rms = [tex]\sqrt{\frac{3kT}{m} }[/tex]
where:
v_rms is the root mean square speed
k is the Boltzmann constant (1.38 x [tex]10^{-23}[/tex] J/K)
T is the temperature in Kelvin
m is the molar mass of CO2
The molar mass of CO2 can be calculated by summing the atomic masses of carbon and oxygen, taking into account their respective quantities in one CO2 molecule.
Molar mass of carbon (C) = 12.01 g/mol
Molar mass of oxygen (O) = 16.00 g/mol
So, the molar mass of CO2 is:
Molar mass of CO2 = (12.01 g/mol) + 2 × (16.00 g/mol) = 44.01 g/mol
Now we can rearrange the formula to solve for temperature (T):
T = [tex]\frac{m*vrms^{2} }{3k}[/tex]
Substituting the given values:
v_rms = 450 m/s
m = 44.01 g/mol
k = 1.38 x [tex]10^{-23}[/tex] J/K
Converting the molar mass from grams to kilograms:
m = 44.01 g/mol = 0.04401 kg/mol
Plugging in the values and solving for T:
T = [tex]\frac{0.04401*450^{2} }{3*1.38*10^{-23} }[/tex]
Calculating the result:
T ≈ 1.624 x [tex]10^{6}[/tex] K
Therefore, at approximately 1.624 x [tex]10^{6}[/tex] Kelvin, the root mean square speed of carbon dioxide (CO2) will be 450 m/s.
Learn more about kinetic here:
https://brainly.com/question/999862
#SPJ11
A battery having terminal voltage Vab =1.3 V delivers a current 1.5 A. Find the internal resistance (in W) of the battery if the emf,ε = 1.6 V.
In order to find the internal resistance of the battery, we'll use the formula:ε = V + Irwhere ε is the emf (electromotive force), V is the terminal voltage, I is the current, and r is the internal resistance.
So we have:ε = V + Ir1.6 = 1.3 + 1.5r0.3 = 1.5r Dividing both sides by 1.5, we get:r = 0.2 ΩTherefore, the internal resistance of the battery is 0.2 Ω. It's worth noting that this calculation assumes that the battery is an ideal voltage source, which means that its voltage doesn't change as the current changes. In reality, the voltage of a battery will typically decrease as the current increases, due to the internal resistance of the battery.
To know more about resistance visit:
https://brainly.com/question/29427458
#SPJ11
On a low-friction track, a 0.36-kg cart initially moving to the right at 4.05 m/s collides elastically with a 0.12 kg cart initially moving to the left at 0.13 m/s. The 0.12-kg cart bounces off the 0.36-kg cart and then compresses a spring attached to the right end of the track.
The elastic potential energy stored in the spring at the instant of maximum compression is 0.726 J.
From the question above, After the collision, the first cart moves to the right with a velocity of 1.08 m/s and the second cart moves to the left with a velocity of -3.49 m/s.
Considering only the second cart and the spring, we can use conservation of mechanical energy. The initial energy of the second cart is purely kinetic. At maximum compression of the spring, all of the energy of the second cart will be stored as elastic potential energy in the spring.
Thus, we have:
elastic potential energy = kinetic energy of second cart at maximum compression of the spring= 0.5mv2f2= 0.5(0.12 kg)(-3.49 m/s)2= 0.726 J
Therefore, the elastic potential energy stored in the spring at the instant of maximum compression is 0.726 J.
Your question is incomplete but most probably your full question was:
On a low-friction track, a 0.36-kg cart initially moving to the right at 4.05 m/s collides elastically with a 0.12-kg cart initially moving to the left at 0.13 m/s. The 0.12-kg cart bounces off the 0.36-kg cart and then compresses a spring attached to the right end of the track.
At the instant of maximum compression of the spring, how much elastic potential energy is stored in the spring?
Learn more about elastic collision at
https://brainly.com/question/15003349
#SPJ11
2. Sodium Chloride is found easily in nature. Write the electron configuration of Nall and C1¹7.
The electron configuration of Na is 1s² 2s² 2p⁶ 3s¹, and the electron configuration of Cl is 1s² 2s² 2p⁶ 3s² 3p⁵. Sodium (Na) has 11 electrons, with one electron in its outermost shell, while chlorine (Cl) has 17 electrons, with seven electrons in its outermost shell.
The electron configuration of an atom represents the arrangement of its electrons in different energy levels or shells. In the case of sodium (Na), it has an atomic number of 11, indicating that it has 11 electrons. The electron configuration of Na is 1s² 2s² 2p⁶ 3s¹.
This means that the first energy level (1s) contains two electrons, the second energy level (2s) contains two electrons, the second energy level (2p) contains six electrons, and the third energy level (3s) contains one electron.
Chlorine (Cl) has an atomic number of 17, which means it has 17 electrons. The electron configuration of Cl is 1s² 2s² 2p⁶ 3s² 3p⁵. Similar to sodium, the first energy level (1s) contains two electrons, the second energy level (2s) contains two electrons, and the second energy level (2p) contains six electrons.
These electron configurations reveal the number and arrangement of electrons in the outermost shell, also known as the valence shell. For Na, its valence electron is in the 3s orbital, and for Cl, its valence electrons are in the 3s and 3p orbitals. These valence electrons are involved in chemical reactions, such as the formation of ionic compounds like sodium chloride (NaCl).
To learn more about electrons click here brainly.com/question/12001116
#SPJ11
Two blocks with masses m1= 4.5 kg and m2= 13.33 kg on a frictionless surface collide head-on. The initial velocity of block 1 is v→1,i= 4.36 i^ms and the initial velocity of block 2 is v→2,i=-5 i^ms. After the collision, block 2 comes to rest. What is the x-component of velocity in units of ms of block 1 after the collision? Note that a positive component indicates that block 1 will be traveling in the i^ direction, and a negative component indicates that block 1 will be traveling in the −i^ direction. Please round your answer to 2 decimal places.
Since a positive component indicates that block 1 will be traveling in the i^ direction, the answer is 4.51 i^. Therefore, the required answer is 4.51. Answer: 4.51.
When two blocks with masses m1 = 4.5 kg and m2 = 13.33 kg on a frictionless surface collide head-on, block 2 comes to rest.
The initial velocity of block 1 is v→1, i = 4.36 i^ ms and the initial velocity of block 2 is v→2, i = -5 i^ ms.
We are required to find the x-component of velocity in units of ms of block 1 after the collision.
We need to find the final velocity of block 1 after the collision. We can use the law of conservation of momentum to solve this problem.
The law of conservation of momentum states that the total momentum of an isolated system of objects with no external forces acting on it is constant. The total momentum before collision is equal to the total momentum after the collision.
Using the law of conservation of momentum, we can write:
[tex]m1v1i +m2v2i = m1v1f + m2v2f[/tex]
where
v1i = 4.36 m/s,
v2i = -5 m/s,m1
= 4.5 kg,m2
= 13.33 kg,
v2f = 0 m/s (because block 2 comes to rest), and we need to find v1f.
Substituting the given values, we get:
4.5 kg × 4.36 m/s + 13.33 kg × (-5 m/s)
= 4.5 kg × v1f + 0
Simplifying, we get:
20.31 kg m/s
= 4.5 kg × v1fv1f
= 20.31 kg m/s ÷ 4.5 kgv1f
= 4.51 m/s
The x-component of velocity in units of ms of block 1 after the collision is 4.51 m/s.
Since a positive component indicates that block 1 will be traveling in the i^ direction, the answer is 4.51 i^.
Therefore, the required answer is 4.51. Answer: 4.51.
To learn more about blocks visit;
https://brainly.com/question/30332935
#SPJ11
(a) The current in a wire is 2.0 mA. In 2.0 ms. how much charge flows through a point in a wire, and how many electrons pass the point?
2.5 × 10¹³ electrons pass through the point in the wire in 2.0 ms.
Current is the rate of flow of charge, typically measured in amperes (A). One ampere is equivalent to one coulomb of charge flowing per second. For a current of 2.0 mA, which is 2.0 × 10⁻³ A, the charge that flows through a point in the wire in 2.0 ms can be calculated using the formula Q = I × t, where Q represents the charge in coulombs, I is the current in amperes, and t is the time in seconds.
By substituting the given values into the formula, we can calculate the resulting value.
Q = (2.0 × 10⁻³ A) × (2.0 × 10⁻³ s)
Q = 4.0 × 10⁻⁶ C
Therefore, 4.0 × 10⁻⁶ C of charge flows through the point in the wire in 2.0 ms. To determine the number of electrons that pass the point, we can use the formula n = Q/e, where n represents the number of electrons, Q is the charge in coulombs, and e is the charge on an electron.
Substituting the values into the formula:
n = (4.0 × 10⁻⁶ C) / (1.6 × 10⁻¹⁹ C)
n = 2.5 × 10¹³
Hence, 2.5 × 10¹³ electrons pass through the point in the wire in 2.0 ms.
Learn more about electrons at: https://brainly.com/question/860094
#SPJ11
At a point a distance r=1.10 m from the origin on the positive x-axis, find the magnitude and direction of the magnetic field. (a) magnitude of the magnetic field (in T ) T (b) direction of the magnetic field +x-direction −x-direction +y-direction −y-direction +z-direction -z-direction At a point the same distance from the origin on the negative y-axis, find the magnitude and direction of the magnetic field. (c) magnitude of the magnetic field (in T ) At a point a distance r=1.10 m from the origin on the positive x-axis, find the magnitude and direction of the magnetic field. (a) magnitude of the magnetic field (in T ) T (b) direction of the magnetic field +x-direction −x-direction +y-direction −y-direction +z-direction −z-direction At a point the same distance from the origin on the negative y-axis, find the magnitude and direction of the magnetic field. (c) magnitude of the magnetic field (in T) T (d) direction of the magnetic field +x-direction
(a) The magnitude of the magnetic field at a point a distance r=1.10 m from the origin on the positive x-axis is 0.063 T.
(b) The direction of the magnetic field is +x-direction.
(c) The magnitude of the magnetic field at a point the same distance from the origin on the negative y-axis is 0.063 T.
(d) The direction of the magnetic field is −y-direction.
The magnetic field at a point due to a current-carrying wire is given by the Biot-Savart law:
B = µo I / 2πr sinθ
where µo is the permeability of free space, I is the current in the wire, r is the distance from the wire to the point, and θ is the angle between the wire and the line connecting the wire to the point.
In this case, the current is flowing in the +x-direction, the point is on the positive x-axis, and the distance from the wire to the point is r=1.10 m. Therefore, the angle θ is 0 degrees.
B = µo I / 2πr sinθ = 4π × 10-7 T⋅m/A × 1 A / 2π × 1.10 m × sin(0°) = 0.063 T
Therefore, the magnitude of the magnetic field at the point is 0.063 T. The direction of the magnetic field is +x-direction, because the current is flowing in the +x-direction and the angle θ is 0 degrees.
The same calculation can be done for the point on the negative y-axis. The only difference is that the angle θ is now 90 degrees. Therefore, the magnitude of the magnetic field at the point is still 0.063 T, but the direction is now −y-direction.
To learn more about magnetic field here brainly.com/question/23096032
#SPJ11
Two objects, A and B, start from rest. Object A starts with acceleration 1.6 m/s^2 and 4.0 seconds later after A, object B starts in the same direction with acceleration 3.4 m/s^2. How long will it take for object B to reach object A from the moment when A started to accelerate?
A car moving with over-speed limit constant speed 31.8 m/s passes a police car at rest. The police car immediately takes off in pursuit, accelerating with 9.6 m/s^2. How far from initial point police car will reach the speeder?
It will take approximately 2.747 seconds for Object B to reach Object A from the moment when Object A started to accelerate.
To find the time it takes for Object B to reach Object A, we need to consider the time it takes for Object A to reach its final velocity. Given that Object A starts from rest and has an acceleration of 1.6 m/s^2, it will take 4.0 seconds for Object A to reach its final velocity. During this time, Object A will have traveled a distance of (1/2) * (1.6 m/s^2) * (4.0 s)^2 = 12.8 meters.After the 4.0-second mark, Object B starts accelerating with an acceleration of 3.4 m/s^2. To determine the time it takes for Object B to reach Object A, we can use the equation of motion:
distance = initial velocity * time + (1/2) * acceleration * time^2
Since Object B starts from rest, the equation simplifies to:
distance = (1/2) * acceleration * time^2
Substituting the known values, we have:
12.8 meters = (1/2) * 3.4 m/s^2 * time^2
Solving for time, we find:
time^2 = (12.8 meters) / (1/2 * 3.4 m/s^2) = 7.529 seconds^2
Taking the square root of both sides, we get: time ≈ 2.747 seconds
Therefore, it will take approximately 2.747 seconds for Object B to reach Object A from the moment when Object A started to accelerate.
To learn more about accelerate:
https://brainly.com/question/32899180
#SPJ11
The focal length of a lens is inversely proportional to the quantity (n-1), where n is the index of refraction of the lens material. The value of n, however, depends on the wavelength of the light that passes through the lens. For example, one type of flint glass has an index of refraction of n 1.570 for red light and ny = 1.612 in violet light. Now, suppose a white object is placed 24.50 cm in front of a lens made from this type of glass. - Part A If the red light reflected from this object produces a sharp image 54.50 cm from the lens, where will the violet image be found? di, viol Submit 175] ΑΣΦ Request Answer B ? cm
To find the location of the violet image formed by the lens, we can use the lens formula:
1/f = (n - 1) * (1/r1 - 1/r2)
where:
f is the focal length of the lens,
n is the index of refraction of the lens material,
r1 is the object distance (distance of the object from the lens),
r2 is the image distance (distance of the image from the lens).
Given information:
Object distance, r1 = -24.50 cm (negative sign indicates the object is placed in front of the lens)
Focal length for red light, f_red = 54.50 cm
Index of refraction for red light, n_red = 1.570
Index of refraction for violet light, n_violet = 1.612
First, let's calculate the focal length of the lens for red light:
1/f_red = (n_red - 1) * (1/r1 - 1/r2_red)
Substituting the known values:
1/54.50 = (1.570 - 1) * (1/-24.50 - 1/r2_red)
Simplifying:
0.01834 = 0.570 * (-0.04082 - 1/r2_red)
Now, let's solve for 1/r2_red:
0.01834/0.570 = -0.04082 - 1/r2_red
1/r2_red = -0.0322 - 0.03217
1/r2_red ≈ -0.0644
r2_red ≈ -15.52 cm (since the image distance is negative, it indicates a virtual image)
Now, we can use the lens formula again to find the location of the violet image:
1/f_violet = (n_violet - 1) * (1/r1 - 1/r2_violet)
Substituting the known values:
1/f_violet = (1.612 - 1) * (-0.2450 - 1/r2_violet)
Simplifying:
1/f_violet = 0.612 * (-0.2450 - 1/r2_violet)
Now, let's substitute the focal length for red light (f_red) and the image distance for red light (r2_red):
1/(-15.52) = 0.612 * (-0.2450 - 1/r2_violet)
Solving for 1/r2_violet:
-0.0644 = 0.612 * (-0.2450 - 1/r2_violet)
-0.0644/0.612 = -0.2450 - 1/r2_violet
-0.1054 = -0.2450 - 1/r2_violet
1/r2_violet = -0.2450 + 0.1054
1/r2_violet ≈ -0.1396
r2_violet ≈ -7.16 cm (since the image distance is negative, it indicates a virtual image)
Therefore, the violet image will be found approximately 7.16 cm in front of the lens (virtual image).
Learn more about refraction here: brainly.com/question/14760207
#SPJ11
For Pauli's matrices, prove that 1.1 [o,,oy] =210₂ (2) 1.2 0,0,0₂=1 1.3 by direct multiplication that the matrices anticommute. (2) (Use any two matrices) [7] (3)
Here is the solution to the given problem:1.1: For Pauli's matrices, it is given as;σx = [0 1; 1 0]σy = [0 -i; i 0]σz = [1 0; 0 -1]Let's first compute 1.1 [σx, σy],We have;1.1 [σx, σy] = σxσy - σyσx = [0 1; 1 0][0 -i; i 0] - [0 -i; i 0][0 1; 1 0]= [i 0; 0 -i] - [-i 0; 0 i]= [2i 0; 0 -2i]= 2[0 i; -i 0]= 210₂, which is proved.1.2:
It is given that;0, 0, 0₂ = 1This statement is not true and it is not required for proving anything. So, this point is not necessary.1.3: For 1.3, we are required to prove that the matrices anticommute. So, let's select any two matrices, say σx and σy. Then;σxσy = [0 1; 1 0][0 -i; i 0] = [i 0; 0 -i]σyσx = [0 -i; i 0][0 1; 1 0] = [-i 0; 0 i]We can see that σxσy ≠ σyσx. Therefore, matrices σx and σy anticomputer with each other.
To know more about matrices visit:
https://brainly.com/question/30646566
#SPJ11
30 (a) A 50 loop, circular coil has a radius of 10 cm and resistance of 2.0 n. The coil is connected to a resistance R = 1.00, to make a complete circuit. It is then positioned as shown in a uniform magnetic field that varies in time according to: B= 0.25 +0.15+2 T, for time t given in seconds. The coil is centered on the x-axis and the magnetic field is oriented at an angle of 30° from y-axis, as shown in the adjoining figure. (1) Determine the current induced in the coil at t = 1.5 s. (6 marks) Eur
At t = 1.5 s, the current induced in the coil is approximately -0.0825π A. We have a circular coil with 50 loops and a radius of 10 cm, connected to a resistance of 1.00 Ω.
The coil is positioned in a uniform magnetic field that varies with time according to B = (0.25t + 0.15t^2 + 2) T, where t is in seconds. The magnetic field is oriented at an angle of 30° from the y-axis. We need to determine the current induced in the coil at t = 1.5 s.
To find the current induced in the coil, we can use Faraday's law of electromagnetic induction, which states that the induced electromotive force (EMF) is equal to the rate of change of magnetic flux through the coil:
EMF = -dΦ/dt
The magnetic flux Φ through the coil can be calculated by multiplying the magnetic field B by the area of the coil. Since the coil is circular, the area is given by A = πr^2, where r is the radius.
At time t = 1.5 s, the magnetic field is given by B = (0.25(1.5) + 0.15(1.5)^2 + 2) T = 2.625 T.
The magnetic flux through the coil is then Φ = B * A = 2.625 T * (π(0.1 m)^2) = 0.0825π T·m².
Taking the derivative of the flux with respect to time, we get dΦ/dt = 0.0825π T·m²/s.
Substituting this value into the equation for the induced EMF, we have:
EMF = -dΦ/dt = -0.0825π T·m²/s.
Since the coil is connected to a resistance of 1.00 Ω, the current induced in the coil can be calculated using Ohm's Law: I = EMF/R.
Substituting the values, we find:
I = (-0.0825π T·m²/s) / 1.00 Ω = -0.0825π A.
Therefore, at t = 1.5 s, the current induced in the coil is approximately -0.0825π A.
Learn more about resistance here: brainly.com/question/29427458
#SPJ11
Located in phys lab of London. consider a parallel-plate capacitor made up of two conducting
plates with dimensions 12 mm × 47 mm
If the separation between the plates is 0.75 mm, what is the capacitance, in F, between them? If there is 0.25 C of charged stored on the positive plate, what is the potential, in volts, across
the capacitor which is also in London?
What is the magnitude of the electric field, in newtons per coulomb, inside this capacitor? If the separation between the plates doubles, what will the electric field be if the charge is kept
constant?
The capacitance is 0.088 μF. The Potential difference, V = 2836.36 V. The magnitude of the electric field between the plates is 3,781,818.18 V/m. After changing the separation between the plate, the new electric field will be: E = (1/2) × 3,781,818.18 V/m = 1,890,909.09 V/m.
Capacitance is defined as the ability of a system to store an electric charge. Capacitor, on the other hand, is an electronic device that has the ability to store electrical energy by storing charge on its plates. It is made up of two parallel plates separated by a distance d.
The capacitance of a parallel-plate capacitor is given by the formula: Capacitance, C = ε0A/d where ε0 is the permittivity of free space, A is the area of the plates and d is the separation between the plates. The capacitance can be found using the given values as: C = ε0A/d = 8.85 × 10-12 F/m × (0.012 m × 0.047 m)/(0.00075 m) = 0.088 μF. If there is a charge of 0.25 C stored on the positive plate, then the potential difference between the plates can be found using the formula: Potential difference, V = Q/CC = Q/V = 0.25 C/0.088 μF = 2836.36 V.
The magnitude of the electric field between the plates can be found using the formula: Electric field, E = V/d = 2836.36 V/0.00075 m = 3,781,818.18 V/m. If the separation between the plates doubles, the capacitance is halved, i.e. the new capacitance will be 0.044 μF. Since the charge is kept constant, the new potential difference will be: V = Q/CC = Q/V = 0.25 C/0.044 μF = 5681.82 V. The electric field is inversely proportional to the distance between the plates, so if the separation between the plates doubles, the electric field will be halved.
Therefore, the new electric field will be: E = (1/2) × 3,781,818.18 V/m = 1,890,909.09 V/m.
Let's learn more about capacitance:
https://brainly.com/question/24242435
#SPJ11
A charge of +77 µC is placed on the x-axis at x = 0. A second charge of -40 µC is placed on the x-axis at x = 50 cm. What is the magnitude of the electrostatic force on a third charge of 4.0 µC placed on the x-axis at x = 41 cm? Give your answer in whole numbers.
The magnitude of the electrostatic force on the third charge is 81 N.
The electrostatic force between two charges can be calculated using Coulomb's law, which states that the force is directly proportional to the product of the charges and inversely proportional to the square of the distance between them.
Calculate the distance between the third charge and the first charge.
The distance between the third charge (x = 41 cm) and the first charge (x = 0) can be calculated as:
Distance = [tex]x_3 - x_1[/tex] = 41 cm - 0 cm = 41 cm = 0.41 m
Calculate the distance between the third charge and the second charge.
The distance between the third charge (x = 41 cm) and the second charge (x = 50 cm) can be calculated as:
Distance = [tex]x_3-x_2[/tex] = 50 cm - 41 cm = 9 cm = 0.09 m
Step 3: Calculate the electrostatic force.
Using Coulomb's law, the electrostatic force between two charges can be calculated as:
[tex]Force = (k * |q_1 * q_2|) / r^2[/tex]
Where:
k is the electrostatic constant (k ≈ 9 × 10^9 Nm^2/C^2),
|q1| and |q2| are the magnitudes of the charges (77 µC and 4.0 µC respectively), and
r is the distance between the charges (0.41 m for the first charge and 0.09 m for the second charge).
Substituting the values into the equation:
Force = (9 × 10^9 Nm^2/C^2) * |77 µC * 4.0 µC| / (0.41 m)^2
Calculating this expression yields:
Force ≈ 81 N
Therefore, the magnitude of the electrostatic force on the third charge is approximately 81 N.
Learn more about electrostatic force
brainly.com/question/9774180
#SPJ11
Learning Goal: The Hydrogen Spectrum Electrons in hydrogen atoms are in the n=4 state (orbit). They can jump up to higher orbits or down to lower orbits. The numerical value of the Rydberg constant (determined from measurements of wavelengths) is R=1.097×107 m−1. Planck's constant is h=6.626×10−34 J⋅s, the speed of light in a vacuum is c=3×108 m/s. What is the LONGEST EMITTED wavelength? Express your answer in nanometers (nm),1 nm=10−9 m. Keep 1 digit after the decimal point. emitted λlongest = nm Part B What is the energy of the Emitted photon with the LONGEST wavelength? The photon energy should always be reported as positive. Express your answer in eV,1eV=1.6⋆10−19 J. Keep 4 digits after the decimal point. What is the SHORTEST ABSORBED wavelength? Express your answer in nanometers (nm),1 nm=10−9 m. Keep 1 digit after the decimal point.
Part A: To find the longest emitted wavelength, we will use the formula:1/λ = R [ (1/n12) - (1/n22) ]Where, R = Rydberg constantn1 = 4n2 = ∞ (for longest wavelength) Substituting the values,1/λ = (1.097 × 107 m⁻¹) [ (1/42) - (1/∞2) ]On solving,λ = 820.4 nm.
Therefore, the longest emitted wavelength is 820.4 nm. Part Bathed energy of the emitted photon with the longest wavelength can be found using the formulae = hoc/λ Where, h = Planck's constant = Speed of lightλ = Longest emitted wavelength Substituting the values = (6.626 × 10⁻³⁴ J s) (3 × 10⁸ m/s) / (820.4 × 10⁻⁹ m)E = 2.411 x 10⁻¹⁹ J.
Converting the energy to eV,E = 2.411 x 10⁻¹⁹ J x (1 eV / 1.6 x 10⁻¹⁹ J)E = 1.506 eV (approx.)Therefore, the energy of the emitted photon with the longest wavelength is 1.506 eV.
To know more about energy visit:
https://brainly.com/question/1932868
#SPJ11
A 0.46 kg mass is attached to a light spring with a force constant of 38.9 N/m and set into oscilation on a horizontal frictionless surface. (Hint: The angular frequency, a, of an ideal mass-spring system is given by w Where k is the spring constant, and m is the mass value. Hint2: The maximum displacement is the amplitude A, the maximum velocity is wa, and the maximum acceleration is orA) of the spring is stretched 5.0 cm and released from rest, determine the following (a) maximum speed of the oscillating mass m's ) speed of the oscillating mass when the spring is compressed 1.5 cm from the equilibrium position my's () speed of the oscillating mass when the spring is stretched 1.5 cm from the equilibrium position ms (d) value of x at which the speed of the oscillating mass is equal to one-half the maximum value mת Blue-green light has a frequency of about 5.8 x 1014 Hz.Using 3.0 x 10 m/s for the speed of light and using the relationship v- find the wavelength of this light in air. Wavelength is How does this wavelength compare with the size of an atom, which is about 10-19 m? wavelength times the size of an atom. atom size 10-10 m Comparing to the size of an atom is important because usually you need a wavelength smaller than an object to be able to detector image the object. MY NOTES - -/13 Points) DETAILS A certain radar installation used to track airplanes transmits electromagnetic radiation of wavelength 2.1 cm. (a) What is the frequency of this radiation, measured in billions of hertz (GHz)? GHz (b) What is the time required for a pulse of radar waves to reach an airplane 4.1 km away and return?
The ratio of wavelength to the size of an atom is;5.17 × 10⁻⁷ m ÷ 10⁻¹⁹ m = 5.17 × 10¹²The ratio of wavelength to the size of an atom is 5.17 × 10¹².
Given the following values,Mass (m) = 0.46 kg
Spring constant (k) = 38.9 N/m
Maximum displacement (A) = 5.0 cm
Maximum speed (vm) = wa
Maximum acceleration (am) = ω² A
Where,ω = angular frequencyω = √(k/m)
A) Maximum speed of the oscillating mass is given by;vm = wa ...[1]
We know that,angular frequency, ω = √(k/m)ω = √(38.9/0.46)ω = 4.0418 rad/s
Substitute the value of ω in [1];
vm = wa = ω × Avm = 4.0418 rad/s × 0.05 mvm = 0.2021 m/s
Therefore, the maximum speed of the oscillating mass is 0.2021 m/s.B) Speed of the oscillating mass when the spring is compressed 1.5 cm from the equilibrium position.
We know that,displacement, x = -0.015 m (compressed)
The equation of motion for the displacement x is;
x = Acos(ωt + φ)
Differentiate with respect to time to obtain the velocity;v = dx/dtv = -Aωsin(ωt + φ)At maximum displacement, sin(ωt + φ) = 1
Therefore;
vmax = -Aω ...[2]
Substitute the value of A and ω in [2];
vmax = -Aω = -0.05 m × 4.0418 rad/svmax = -0.2021 m/s
At x = -0.015 m,
x = Acos(ωt + φ)cos(ωt + φ) = x/Acos(ωt + φ) = -0.015/0.05 = -0.3
Differentiate with respect to time to obtain the velocity;
v = dx/dtv = -Aωsin(ωt + φ)
At cos(ωt + φ) = -0.3, sin(ωt + φ) = -0.9599
Therefore;v = -0.2021 m/s × -0.9599v = 0.1941 m/s
Therefore, the speed of the oscillating mass when the spring is compressed 1.5 cm from the equilibrium position is 0.1941 m/s.
To know more about wavelength visit:
https://brainly.com/question/31143857
#SPJ11
2 Question 7 1.6 pts Light from a helium-neon laser (1 =633 nm) is used to illuminate two narrow slits. The interference pattern is observed on a screen 3.0 m behind the slits. Twelve bright fringes a
In an interference pattern created by a helium-neon laser light passing through two narrow slits, twelve bright fringes are observed on a screen located 3.0 m behind the slits. The wavelength of the laser light is given as 633 nm.
The interference pattern in this scenario is a result of the constructive and destructive interference of the light waves passing through the two slits.
Bright fringes are formed at locations where the waves are in phase and reinforce each other, while dark fringes occur where the waves are out of phase and cancel each other.
The number of bright fringes observed can be used to determine the order of interference. In this case, twelve bright fringes indicate that the observation corresponds to the twelfth order of interference.
To calculate the slit separation (d), we can use the formula d = λL / m, where λ is the wavelength of the light, L is the distance between the screen and the slits, and m is the order of interference. Given the values of λ = 633 nm (or 633 × 10^-9 m), L = 3.0 m, and m = 12, we can substitute them into the formula to find the slit separation.
Learn more about fringes here: brainly.com/question/31387359
#SPJ11
What is the dose in rem for each of the following? (a) a 4.39 rad x-ray rem (b) 0.250 rad of fast neutron exposure to the eye rem (c) 0.160 rad of exposure rem
The dose in rem for each of the following is:(a) 4.39 rem(b) 5.0 rem(c) 0.160 rem. The rem is the traditional unit of dose equivalent.
It is the product of the absorbed dose, which is the amount of energy deposited in a tissue or object by radiation, and the quality factor, which accounts for the biological effects of the specific type of radiation.A rem is equal to 0.01 sieverts, the unit of measure in the International System of Units (SI). The relationship between the two is based on the biological effect of radiation on tissue. Therefore:
Rem = rad × quality factor
(a) For a 4.39 rad x-ray, the dose in rem is equal to 4.39 rad × 1 rem/rad = 4.39 rem
(b) For 0.250 rad of fast neutron exposure to the eye, the dose in rem is 0.250 rad × 20 rem/rad = 5.0 rem
(c) For 0.160 rad of exposure, the dose in rem is equal to 0.160 rad × 1 rem/rad = 0.160 rem
The dose in rem for each of the following is:(a) 4.39 rem(b) 5.0 rem(c) 0.160 rem.
To know more about International System of Units visit-
brainly.com/question/30404877
#SPJ11