a ferry boat shaped just like a brick is 7.7 m wide and 6.2 m long. when a truck pulls onto it, the boat sinks 5.57 cm in the water. what is the weight of the truck? the acceleration of gravity is 9.81 m/s 2 . answer in units of n.

The magnitude and direction of the net electrostatic force on particle 4 due to the other three particles are 6.16×10^−24 N counterclockwise from the +x axis.

The individual force magnitudes are found using Eq., with SI units (soa=0.02 m) and k as in Eq., We use magnitude-angle notation (convenient if one uses a vector-capable calculator in polar mode), listing the forces due to +4.00q,+2.00q, and −2.00q

charges: (4.60×10^−24∠180 deg  )+(2.30×10^−24∠−90 deg )+

(1.02×10^−24∠−145 deg)= (6.16×10^−24 ∠−152 deg )

Therefore, the net force has magnitude of 6.16×10^−24 N.

The direction of the net force is at an angle of −152 deg or 208 deg

measured counterclockwise from the +x axis).

Learn more magnitude and direction here :

https://brainly.com/question/29766788

#SPJ4

The complete question is :

n Fig. what are the direction of the net electrostatic force on particle 4 due to the other three particles? All four particles are fixed in the xy plane, and q1 = - 3.20 × 10^-19C, q2 = + 3.20 × 10^-19 C, q3 = + 6.40 × 10^-19 C. d 3=2.00 cm.

You may calculate the average load current—the average diode current—by dividing the average load voltage by the average load resistance.

Vavg = 15.45 V

Diode conduction is 7.11 percent.

Iavg = 0.232 A

Ip = 0.449 A

Case (ii) (ii)

Vavg = 16.18 V

Diode conduction is 2.25 percent.

Iavg = 0.735 A

Ip = 1.453 A

The transformer's secondary side has a voltage of

= Vpri/turn ratio

Vrms = 120/10 = 12 V

Peak voltage and rms voltage have the following relationship:

Vp = Vrms / 2.

Vp = 12√2 = 16.97 V

Vd = 0.7 V

We will first determine all the necessary variables for the ripple voltage of 10%, and then for the ripple voltage of 1%.

10% of the highest output in scenario I

What average output voltage is produced?

Vavg = Vp - Vd - 0.5Vr is the average output voltage.

Vp is the maximum output voltage.

Diode voltage drop is denoted by Vd, while ripple voltage is denoted by Vr, which is expressed as a percentage of Vp.

Vavg = 0.5Vr + Vp - Vd

Vavg = 16.97 - 0.7 - 0.5[0.1(16.97 - 0.7)]

Vavg = 15.45 V

(b) The diode conducts what percentage of the cycle?

= Vd - 2Vr/Vp

Vp- Vd = 2*0.1 (Vp-Vd)/Vp

ω = √2*0.1(16.97-0.7)/16.97 - 0.7

ω = 0.447 rad

Diode conductance equals (/2)*100

Diode conductance is (0.447/2)*100

Diode conduction is 7.11 percent.

The typical diode current is (c).

Iavg = Vavg/R[1 + (2(Vp - Vd)/0.1(Vp-Vd))] is the formula for average current.

Average current is equal to Iavg, which is 15.45/1000[1 + (2(16.97 - 0.7)/0.1(16.97-0.7)]

Iavg, or average current, is 0.232 A.

(d) How much diode current peaks at?

Peak current is defined as Ip = Vavg/R[1 + 2(2(Vp - Vd)/0.1(Vp-Vd)]

Peak current is expressed as Ip = 15.45/1000[1 + 2](2(16.97 - 0.7)/0.1(16.97-0.7)]

Peak current is 0.449 A, or Ip.

What average output voltage is produced?

Vavg = 16.97 - 0.7 - 0.5[0.01(16.97 - 0.7)]

Vavg = 16.18 V

(b) The diode conducts what percentage of the cycle?

Vp - Vd = 2*0.01(Vp-Vd)

ω = √2*0.01(16.97-0.7)/16.97 - 0.7

ω = 0.1417 rad

Diode conductance is (0.1417/2)*100

Diode conduction is 2.25 percent.

The typical diode current is (c).

Average current is equal to Iavg, which is 16.18/1000[1 + (2(16.97 - 0.7)/0.01(16.97-0.7)]].

Average current is 0.735 A (Iavg).

(d) How much diode current peaks at?

Peak current is expressed as Ip = 16.18/1000[1 + 2](2(16.97 - 0.7)/0.01(16.97-0.7)]

Peak current is 1.453 A, or Ip.

To learn more about diode current refer

https://brainly.com/question/15023538

#SPJ4

4. 90 degrees angular direction of the cannon produces the greatest projectile height.

To learn more about The angular direction of the cannon refer to:

https://brainly.com/question/17074685

#SPJ1

By performing a physics demonstration in front of the students. F is 9.79 x 108 newtons.

Given,

Mr. Gewanter weighs 60 kilograms (kg).

The weight of Martha is 55 kg.

d = 1.5 meters separates them.

The equation F = GMm/d2 newton determines the gravitational force between them.

changing the given values in the equation above

F = (6.673 x 1011 x 60 x 55)/1.52 = 9.79 x 108 newtons.

As a result, F = 9.79 x 108 newton is the gravitational pull Mr. Gewanter has on Martha.

A geostationary satellite travels in a circular path around the planet with a 36,000 km radius. The orbital period of a spy satellite will then be roughly (Re = 6400 km), orbiting a few hundred kilometers above the surface of the planet.

To know more about Newtons visit:

https://brainly.com/question/4128948

#SPJ1

Answer:

To calculate the speed of the bullet, we can use the equation v = rωθ, where r is the distance between the disks, ω is the angular speed, and θ is the angular displacement of the bullet holes. In this case, v = 99 cm(2π/60)(26°/360) = 7.8 m/s. Therefore, the speed of the bullet is 7.8 m/s.

The frequency of a wave is the wide variety of oscillations or cycles according to unit of time, commonly measured in hertz (Hz). The objects total distance is 700 m.

The wavelength is the distance between  consecutive peaks or troughs in a wave, normally measured in meters. The velocity of a wave is the distance it travels consistent with unit of time, generally measured in meters in keeping with 2d. The connection among frequency, wavelength, and velocity is defined by way of the equation: velocity = frequency x wavelength.

This courting is referred to as the wave equation. As frequency increases, wavelength decreases and as frequency decreases, wavelength will increase.

The total distance of the object is

500 m + 200 m

= 700 m.

To know more about Wavelength visit:

brainly.com/question/13533093

#SPJ4

a. The acceleration of the object is calculated to be 6.36 m/s².

b. During the first 11 seconds, the object travels 385 m.  

c. The average velocity of the object during the first 11 seconds is 70 m/s.

d. The final velocity is 31.8 m/s.

e. The object's displacement at this time is 79.5 m.

Speed of the object = 70 m/s  

Time = 11 sec

The acceleration of the object is described to be the rate of change of speed.

So, acceleration = 70/11= 6.36 m/s²

From the equations of motion, we know, s = ut + 1/2 a t²

As, u = 0 here, s = 1/2 a t²

s = 1/2 (70/11) 11² = 385 m

The following formula is used to determine the object's initial displacement,

s₀ = ut

s₀ = 0

After the first 11 seconds, the object's displacement is determined as follows,

s₁ = v t

s₁ = 70 × 11 = 770 m

The object's average velocity is computed as follows:

v = (s₁ - s₀)/t = (770-0)/11 = 70 m/s

Hence, the average velocity of the object is 70 m/s.

Relation between initial, final velocity, acceleration is

v = u + a t

v = 0 + 6.36 × 5 = 31.8 m/s

To find displacement, let us use the equation, v² - u² = 2 a s

Making s as subject, we have, s = (v² - u²)/2 a = (31.8² - 0)/(2 × 6.36) = 79.5 m

To know more about motion:

https://brainly.com/question/14836207

#SPJ4

The gravitational potential energy of the skydiver is 4.2 × 10⁷.

The amount of work done on an object is directly proportional to the force applied on the object and the distance it moves in the direction of that force. The speed of an object does not directly affect the amount of work done on it. However, if the force and distance are constant, the work done on an object will be greater if it is moving at a higher speed because the object will have greater kinetic energy.

In addition, the time taken to do the same amount of work on an object will be less if it is moving at a higher speed, as the work is done over a shorter period of time.

The required details for gravitational in given paragraph

Joules (120 x 9.8 x 3500)

= 42,000,000 or 4.2 × 10⁷

To know more about Gravitational visit:

brainly.com/question/13467280

#SPJ4

The forces F2 and F3 are the forces that would do a negative work.

We have to to note that the term work has to do with the product of the force and the distance of the object that has been covered in the direction of the force.

Now we know that we have the system of forces that is acting at a common point. We must note that the quadrant in which the force falls is what would tell us the kind of work that the force would have to do.

The forces that are in the negative quadrants are the ones that would do a negative work.

Learn more about work:https://brainly.com/question/18094932

#SPJ1

The second kinematic equation (vf = vi + at) is used to calculate the final velocity of an object based on its initial velocity and acceleration.

It cannot be used to calculate the height of an object since it does not take into account the vertical displacement of the object. To calculate the height of an object, you must use the first kinematic equation (y = yi + vi*t + 1/2*a*t^2).

The study of motion in a system of bodies is called kinematics, which does not directly take into account the forces or potential fields influencing the motion. In other terms, kinematics investigates the distribution of momentum and energy among interacting bodies.

To know more about kinematics here

https://brainly.com/question/7590442

#SPJ4

The smallest value of resistance that we can measure is 74 Ω(ohm), if the maximum power supply is 500 ma and the supply voltage is 37 V.

According to Ohm's law, the current in a conductor is directly proportional to the potential difference between its two ends. In other words, the ratio of the potential difference(V) and the electric current(I) is a constant in a conductor. This constant is called "resistance(R)". its unit is Ω(ohm). Mathematically,

V = IR

R = V/I

The maximum current, I = 500 ma = 500 × 10⁻³ A

Voltage supply, V = 37 Volts

R = 37/ (500 × 10⁻³) = 74 Ω

To know more about resistance, here

https://brainly.com/question/29427458

#SPJ4

The magnitude of the electric field (in V/m) in the region between the plates is 20.35x10^5V/m.

Given the distance between the plates (d) = 1.4cm = 1.4x10^-2m

The potential difference across the plates is (V)  = 28.5kV = 28.5x10^3V

The electric field between two parallel conducting plates is dependent on the voltage or potential difference between the two plates as well as their separation from one another. The two charged parallel plates would carry their total charges since an electric insulator separates them. Because the two parallel charged plates are kept apart from one another, a homogenous electric field is created there.

According to Coulombs law E = V/d such that

E = 28.5x10^3V/1.4x10^-2m = 20.35x10^5V/m

Hence the required magnitude of the electric field is 20.35x10^5V/m

To learn more about electric field click here https://brainly.com/question/15800304

#SPJ4

The 0.80 m is the starting height of the car at the top of a frictionless track.

What is frictionless?

Frictionless is a type of technology that enables activities or processes to occur without resistance or difficulty. It is used in a variety of fields, from banking to digital marketing, and it generally involves the use of software or other digital tools that simplify complex tasks and make them easier to accomplish. With frictionless technology, users are able to perform tasks faster, more securely and with minimal effort. For example, in banking, frictionless technology is used to enable customers to make payments or transfers without having to enter their credentials or payment information each time. Similarly, in digital marketing, frictionless technology is used to enable customers to make purchases without having to enter their billing information multiple times.

The 0.50 m is the diameter of the loop that the car goes through. The 0.25 m is the height of the car when it exits the ramp.

To learn more about frictionless
https://brainly.com/question/25825478

#SPJ1

The index of refraction of gas will be 1.008 units.

The number of wavelengths originally in the cylinder is m1 = 2L/λ when light is counted in both directions.

It transforms into m2 = 2L/λ/n gas.

= 2ngasL/λ​

As the cylinder is filled with gas,

If N is the number of bright fringes passing,

N = m2 - m1

= 2L/λ (ngas - 1) or,

The index of refraction of the gas is,

ngas =1 + Nλ/2L = 1+ (221)(502 x 10⁻⁹ m)/2(3.99 x 10⁻²)

= 1.008 units

To learn more about index of refraction refer to :

https://brainly.com/question/12469161

#SPJ4

Atoms join to form chemical groups called molecules, which in turn join to form compounds.

A molecule is a group of two or more atoms that are chemically bonded together. The bonding is achieved through the sharing or exchange of electrons between the atoms. The atoms in a molecule can be the same or different elements and can be arranged in various ways to form different types of molecules.

Molecules can be either simple or complex, depending on the number of atoms and the types of chemical bonds that hold the atoms together. Simple molecules, such as H2 and O2, are composed of only a few atoms, while complex molecules, such as proteins and DNA, can contain hundreds or even thousands of atoms.

To know more about DNA visit: https://brainly.com/question/264225

#SPJ4

The final velocity of the combined mass of the fullback and the two linebackers is 4.09 m/s.

To find the velocity of the combined mass of the fullback and the two linebackers, we need to use the principle of conservation of momentum. This principle states that the total momentum of an isolated system remains constant if no external forces act on it.

First, we need to find the initial momentum of the fullback by multiplying his mass (90 kg) by his velocity (5.0 m/s):

Initial momentum of fullback = 90 kg * 5.0 m/s = 450 kg m/s

Next, we need to find the initial momentum of the two linebackers by multiplying each of their masses by their velocities:

Initial momentum of first linebacker = 73 kg * 3.0 m/s = 219 kg m/s

Initial momentum of second linebacker = 73 kg * 4.0 m/s = 292 kg m/s

Now, we need to add the initial momentum of the three individuals to find the total initial momentum:

Total initial momentum = 450 kg m/s + 219 kg m/s + 292 kg m/s = 961 kg m/s

Since the final velocity of the combined mass is going to be the same as the initial momentum, we can say:

Final velocity = 961 kg m/s / (90 kg + 73 kg + 73 kg) = 961 kg m/s / 236 kg = 4.09 m/s

Therefore, the final velocity of the combined mass of the fullback and the two linebackers is 4.09 m/s.

Learn more about Conservation of Momentum here: https://brainly.com/question/29220242

#SPJ4

The work done in case a) is positive, in case b) is negative and in case c) is positive.

Work is said to be done when the displacement is occur in the direction of the applied force.  

W = F×d×cosθ

Where F is the force, d is the displacement and θ is the angle between the displacement and the direction of the force.

In case a) as the work is done against the direction of the gravity so the work is positive. In case b) the weight of the buckets acts in downwards direction, that is the direction of the acceleration due to gravity. So the work is negative. In case c) the bucket were lowered, it means the displacement is in the direction of the applied force. Hence the work done is positive.

To know more about force, here

https://brainly.com/question/13191643

#SPJ4

Two units of measurement are necessary to describe the speed, are meter and second.

Speed of an object is nothing but the distance travelled by the object in unit time. A freely falling ball experience the acceleration due to gravity in the downward direction. The value of acceleration due to gravity of the earth is roughly taken as 10 m/s². If the initial speed is 20 m/s. and Time, t = 1 sec. Then speed in the next second will be v = u + at

v = 20 + 10 × 1

v = 30 m/s

Meter is the SI unit of length or distance and second is the SI unit of time.

To know more about speed, here

https://brainly.com/question/28224010

#SPJ4

The intensity of the rays of sun does not fall uniformly across the surface of the earth. In large part, this is driven by latitude and season.

There is a relationship between latitude and temperature across the world, as typically temperatures are warmer approaching the Equator while cooler approaching the Poles. There exist variations, though, as other factors such as ocean currents, elevation, and precipitation affect climate patterns.

As a result latitude and season make the intestity of the sun ray's to fall nonuniformly all around the globe.

You can learn more about latitude at

https://brainly.com/question/28173702

#SPJ4

Answer: Intital speed of bullet is 286 m/s.

What is law of conservation of energy?

--The law of conservation of energy states that energy can neither be created nor be destroyed.

-- Although, it may be transformed from one form to another.

--  If you take all forms of energy into account, the total energy of an isolated system always remains constant.

According to law of conservation we have,

V1 = Vbu + Vb/ Vb( 2gh)^1/2

Mass of Bob is 0.950 Kv

Mass of bullet is 7g.

By solving above bw get intial speed of bullet is 289m/s.

What is energy ?

--In physics, energy is the quantitative property that is transferred to a body or to a physical system, recognizable in the performance of work and in the form of heat and light.

--Energy is a conserved quantity—the law of conservation of energy states that energy can be converted in form, but not created or destroyed.

Learn more about force from https://brainly.com/question/12785175

#spj4

The aircraft takes off from the runway with its brakes locked. At such a speed of 200 fps, the aircraft takes off. Find out when the plane will arrive.

How quickly do airplanes take off and land?

The ground run can be a little bit longer if a decreased power takeoff is being performed. Prior to takeoff, a typical commercial aircraft accelerates to a speed of 120–140 knots. It will need a strong sustained acceleration to complete it in 30 to 35 seconds. Pilots watch for this as they roll out for takeoff.

What is the total vertical force acting on the aircraft when it takes off?

When a result, there is no net vertical force acting on the aircraft as it takes off. When a result, there is no net vertical force acting on the aircraft as it takes off. The net vertical force acting on the aircraft as it ascends is therefore 65000 Newton.

To know more about speed visit:

https://brainly.com/question/28224010

#SPJ4

The visual phenomenon in which an elongated object moving towards or away from the viewer appears compressed and shorter than its actual length is called linear perspective.

Linear perspective is based on a fixed point of view. A visual phenomenon in which an elongated object projected toward or away from the viewer appears to be compressed shorter than it actually is. Linear perspective is a system that creates the illusion of depth on a flat surface. All parallel (perpendicular) lines in a painting or drawing using this system converge at a single vanishing point on the horizontal line of the composition. An example of linear perspective is the obvious convergence of two parallel lines, especially when viewing a long two-lane highway.

Learn more about the linear perspective in

https://brainly.com/question/11833253

#SPJ4

Answer:

Option C.   10 m/s²

Explanation:

First we need to find the mass of the object.

We can use Newton's second law to evaluate the mass of the object.

Newton's second law says that the net force of is equal to the mass times it acceleration.

[tex]F_{net} =ma[/tex]

Lets solve for [tex]m[/tex].

Divide each side by [tex]a[/tex].

[tex]m=\frac{F_{net} }{a}[/tex]

We are given

[tex]F_{net} =45\\a=5[/tex]

Lets evaluate [tex]m[/tex].

[tex]m=\frac{45}{5}[/tex]

[tex]m=9[/tex]

Now we can find the object's acceleration if the force doubles.

[tex]F_{net} =ma[/tex]

Lets solve for [tex]a[/tex].

Divide each side by [tex]m[/tex].

[tex]a=\frac{F_{net} }{m}[/tex]

Doubling the force of 45 N leaves us with a force of 90 N.

[tex]a=\frac{90}{9}[/tex]

[tex]a=10[/tex]

We can see that the object's acceleration is directly proportional to the net force and inversely proportional to the object's mass.

If an observer said the child was not moving, the reference point might have been used is persons in the wagon. The conclusion is from the concept of relative motion.

The relative motion is the motion of an object depending on frames of reference. The motion is relative and not absolute depending on frames of reference used in that motion.

For example, you are in a car moving and see people walking on the side of the road. A person who also in a car will say you are not moving. But, the people on the side of the road will say that you are moving.

A child is riding in a wagon. We know that there are some people in the wagon.

An observer said that the child is not moving. Find reference point might have been used!

Based on the explanation above, the people in the wagon see the child not moving. Otherwise for people around, the child is moving.

Thus, the reference point have been used is people in the wagon.

Learn more about relative motion here:

brainly.com/question/28278187

#SPJ4

Dark matter is a hypothetical form of matter that is thought to make up approximately 85% of the total matter in the universe.

What is dark matter and where does it reside?

It is called "dark" because it does not emit, absorb, or reflect any electromagnetic radiation, making it invisible to telescopes.

It is believed that dark matter resides in the halo of our galaxy, which is a large, spherical region that surrounds the galaxy. It is also thought to be present in galaxy clusters and in the large-scale structure of the universe.

Dark matter and dark energy are mysterious because they cannot be directly observed through telescopes or other instruments. They are detected only through their gravitational effects on visible matter, such as the rotation of galaxies and the expansion of the universe.

Dark matter and dark energy are important because they play a crucial role in the formation and evolution of structure in the universe. The gravitational pull of dark matter is thought to be responsible for the formation of galaxies and galaxy clusters, while dark energy is thought to be driving the accelerated expansion of the universe.

Understanding the properties and behavior of dark matter and dark energy is a major focus of current research in cosmology and astrophysics.

To learn more about dark matter:

https://brainly.com/question/28256017

#SPJ1

Barometric column, barometer column, etc. mercury barometer: a device that uses a mercury column to measure the height of the column (in inches of mercury) to determine atmospheric pressure.

To learn more about Barometric column refer to:

https://brainly.com/question/24068374

#SPJ4

The Coriolis effect describes the deflection pattern experienced by an object that is not firmly anchored to the ground as it travels long distances around the Earth. Many large-scale weather patterns are caused by the Coriolis effect.

The rotation of the Earth is important for the Coriolis effect. In particular, the Earth rotates faster at the equator than at the poles. Because the Earth is wider at the equator, the equatorial region must travel about 1,000 kilometers (1,000 miles) per hour to make one revolution of her in 24 hours. The Earth rotates slowly near the poles at 0.00008 kilometers (0.00005 miles) per hour. If you play catch anywhere in the northern hemisphere, the ball will curve to the right.

Apparent deflection is due to the Coriolis effect.

To know more about Coriolis effect, visit,

https://brainly.com/question/1757337

#SPJ4

The tangential speed, v, must the bob have so that it moves in a horizontal circle with the string always maintaining an angle θ from the vertical is √mgLsinθtanθ.

Given the mass of bob = m

length of string = L

The angle the string of pendulum makes with cone =  θ

The tangential speed the bob moves = v

the vertical component of tension must support the weight of the bob which is represented as: Tcosθ = mg where g is acceleration due to gravity.

the horizontal component of tension must equal the centripetal force acting on the bob which is: Tsinθ = v^2/r where r is the radius of orbit.

However, we know that, r = Lsin(θ) then Tsinθ = v^2/Lsin(θ)

Then Tsinθ/Tcosθ = v^2/(mg x Lsin(θ))

tanθ = v^2/mgLsinθ

then v = √mgLsinθtanθ

Hence the tangential speed the bob moves with is √mgLsinθtanθ

To learn more about tension click here https://brainly.com/question/11348644

#SPJ4

1.1.1: The force, which is 61.4 N and inclined at a 34.4° angle to the horizontal,

1.1.2: The resultant force is 30.8° inclined to the horizontal and is 66.9 N in magnitude.

How does vector addition work?

The process of adding vectors together to determine the resulting force is known as vector addition.

Vector addition is the theory that was applied in this question

The steps involved in adding vectors are as follows:

First, use the two provided vectors and the resulting vector to scale up a vector diagram.

Step 2: Apply the Pythagorean theorem to determine the magnitude of each vector.

Calculate each vector's angle with respect to the horizontal in step three.

4th step: Apply the  Use the law of cosines to find the magnitude of the resultant vector

Step 5: Use the law of sines to find the angle of the resultant vector with respect to the horizontal.

To learn more about vector addition refer :

https://brainly.com/question/25705666

#SPJ1