Answer:
just multiply 2 time 5 a
Explanation:
A boy wants use his slingshot to shoot a water balloon into the air. His
slingshot has a spring constant of 60 N/m, and he pulls it back 1.5 m before
releasing the water balloon and launching it into the air. If air resistance can
be ignored and the water balloon has a mass of 0.5 kg, what is the
approximate maximum height that the water balloon can reach? (Recall that g
= 9.8 m/s2)
O A. 7.0 m
B. 4.6 m
C. 9.3 m
D. 13.8 m
Answer:
A. 70 m OS the correct one
The approximate maximum height that the water balloon can reach is 13.8 m, The correct option is D.
What is the conservation of energy?Conservation of energy is a fundamental principle in physics that states that energy cannot be created or destroyed, only transformed or transferred from one form to another. In other words, the total amount of energy in a closed system remains constant over time. This principle is based on the idea that energy is a fundamental property of the universe, and it is a key concept in many areas of science, including physics, chemistry, and engineering. The law of conservation of energy is used to analyze and understand a wide range of physical phenomena, from the behavior of subatomic particles to the workings of the entire universe.
Here in the Question,
The maximum height that the water balloon can reach can be found using conservation of energy. The initial potential energy stored in the slingshot is transformed into kinetic energy of the water balloon as it is launched into the air, and then into potential energy at the maximum height.
The initial potential energy of the slingshot is given by:
PE = (1/2)kx^2
where k is the spring constant (60 N/m) and x is the distance pulled back (1.5 m)
PE = (1/2)(60 N/m)(1.5 m)^2
PE = 67.5 J
At the maximum height, all of the initial potential energy is converted into potential energy due to gravity:
PE = mgh
where m is the mass of the water balloon (0.5 kg), g is the acceleration due to gravity (9.8 m/s^2), and h is the maximum height.
h = PE/(mg)
h = 67.5 J/(0.5 kg)(9.8 m/s^2)
h ≈ 13.8 m
Therefore, the approximate maximum height that the water balloon can reach is 13.8 m, which is option D.
To learn more about Kinetic Energy click:
https://brainly.com/question/26472013
#SPJ2
What is the volume of 27 g of aluminium?
Answer:10cm3
Explanation:Volume Al = (27g Al)/(2.70g/cm3 Al) = 10cm3 Al. So, 27g of Al has a volume of 10cm3. *
Answer:
Explanation:
as we know that
density=mass/volume
given mass of Al=27 g
density of Al=2.70g/cm^3
volume =mass/density
volume=27/2.70
volume=10 cm³
so 27 g of Al has volume of 10 cm³
An airplane flies 33 m/s due east while experiencing a tailwind
of unknown velocity due north. The resultant velocity is
determined to be 35.11 m/s northeast. What is the velocity of
the northern tailwind?
Explanation:
Use Pythagorean theorem.
v² = vₓ² + vᵧ²
(35.11 m/s)² = (33 m/s)² + vᵧ²
vᵧ = 12 m/s
The velocity of the northern tailwind is 12 m/s.
To find the velocity of northern tailwind, the given values are,
Resultant velocity v = 35.11 m/s,
Velocity of plane vₓ = 33 m/s.
What is the resultant velocity?The resultant velocity of the plane is the sum of the velocities of the plane and the wind with the consideration of their directions. The sum of the vector forces on an object is equal to the scalar product of the object's mass and its acceleration vector.The plane heads east and the wind being a tailwind also heads north east. Hence, we add their values using Pythagorean theorem,Use Pythagorean theorem.
v² = vₓ² + vᵧ²
(35.11 m/s)² = (33 m/s)² + vᵧ²
vᵧ² = 35.11² - 33²
vᵧ² = 1232.71 - 1089
vᵧ = √143.71
vᵧ = 11.98 m/s
which can be vᵧ = 12 m/s
Hence, the velocity of the northern tailwind is vᵧ = 12 m/s.
Learn more about resultant velocity,
https://brainly.com/question/1511670
#SPJ6
Which material will heat up the most quickly if placed near a heat source?
Rubber
Plastic
Glass
Metal
Answer:
Metal
Explanation:
Just answered on Apex
Metal is the material will heat up the most quickly if placed near a heat source. Option D is correct.
What is heat ?
The movement of energy from a hot to a cold item is characterized as heat. Heat energy flows from a hot material to a cold one.
This occurs because faster-vibrating molecules transmit their energy to slower-vibrating ones. Heat content is another name for vibrational energy.
It is hot or chilly depending on how much heat is there in the body. The body will be hotter as the heat content increases. The movement of energy from a hot to a cold item is characterized as heat.
The heat flow in the material is due to the free electrons. In the metal, no of free electron is highest. Metal is the material will heat up the most quickly if placed near a heat source.
Hence, option D is correct.
To learn more about the heat, refer to the link;
brainly.com/question/1429452
#SPJ2
Can anyone help me please?
Answer: 2 PARAGRAPH ESSAY
Explanation:Flexibility and stretching: preventing sports injuries
Many may know about all the different types of sports around the world. Lots can leave serious injuries. All across the world more than 1.2 million people have been injured because of sports or maybe more than that. Most of the injuries have been kids. To prevent these injuries from happening. One thing is stretching if you don’t stretch your bones more than likely you are not into your flexibility and reflexus that for they are very weak. If there is not enough flexibility within your movement you are more than likely not able to stretch. It can help the growth within your bone as well. If you have growth in your bones then you will get less injuries. If you break a bone such as your leg or sprain there is a chance that you will have problems with that specific leg later on in life. To prevent these types of events from happening I say stretch before a sporting game. Stretching can help with the impact of your flexibility. For example, Olympic gymnasts are able to do lots of tricks because their bones have flexibility in their bones. That's not saying that they will not hurt themselves, it's just such a low risk because their bone grew strength and flexibility. Some people's bones can be very sensitive then others so it might be kind of hard for them to be flexible. Another way to help people with their bone flexibility is drinking milk. Milk helps grow your bones. This can help prevent sport injuries in many ways. Lots of people get hurt in football to be more specific because it's such a durable sport as in tough. If they drink a lot of protein and milk before a game maybe even Carbohydrates their bones will be ready for the game. Flexibility and stretching can go lots of ways when it has to do with your body. JUST STAY FIT
A car is traveling at 40 m/s. If it travels for 30 s how far will it travel.
Answer:
okay I might be wrong but it was an answer i had in like fifth grade MAYBE 1,200 meters
Explanation:
If a fish experiences an a of 9.8m/s2 over a period of 1.84s, what was the 4v?
Answer:
It’s 18.0 m/s
Explanation:
Use acceleration formula then plug in 9.8 and 1.84s
what is the difference between a physical quantity and a unit
Answer: What is the difference of physical quanity and a unit?
Explanation: If you are working science or math problems, the answer to this question is that quantity is the amount or numerical value, while the unit is the measurement. For example, if a sample contains 453 grams, the quantity is 453 while the unit is grams.
1. Why are the speed values in the data table called "average" instead of "instantaneous"?
Answer:
The speeds are called average because they are a calculation of a course of distance divided by a duration of time.
Explanation: Instantaneous speed is when the speed is instant for instance when driving a car and if you would want to check how fast that you are moving you would instantly look at the speedometer that is what we call instantaneous speed
A young woman suffered from a severe injury to her pelvic cavity. What potential problem would her doctors be most likely concerned about? difficulty digesting food inability to produce oxygenated blood inability to breath normally difficulty having children
I'm Pretty Sure The Answer Is - Difficulty Digesting Food Inability
Hopr This Help's
Answer:
Difficulty having children
Explanation:
Just took the test.
Which statement illustrates how engineering has influenced society?
A. Digital cameras require far less time to generate images than film cameras
do.
B. Digital cameras allow people to take more pictures and share them more
widely than film cameras did.
C. People want the cameras in their cell phones to be able to capture high-
resolution images
D. People expect that advances in imaging technology will keep up with their
needs for sharing pictures.
The statement illustrates how engineering has influenced society in that People want the cameras in their cell phones to be able to capture high-resolution images. Option C is corect.
What is a digital camera?A digital camera that creates pictures that can be saved on a computer and seen on a screen.
People want their mobile phone cameras to be able to take high-resolution pictures, which shows how engineering has affected society.
Statement B illustrates how engineering has influenced society.
Hence option C is correct.
To learn more about the digital camera refer;
https://brainly.com/question/14644351
#SPJ2
hey can anyone help me out in dis pls!
Answer:
D
Explanation:
Answer:
B
Explanation:
increasing the waters temperature
What is the mass number of this atom?
Model Atom
w
A. 8
B. 16
C. 24
Answer:
C.24
Explanation:
ok...... ..........
A seal swims toward an inlet with a speed of 7.0 m/s as a current of 1.5 m/s
flows in the opposite direction. How long will it take the seal to swim
120. m?
Answer:
scees 3
Explanation:
fd4cesv 3sce3bd. s3 s3vd3 ze ze 4s d4 zr s3 d4
Is It true that if you drop a heavy object and a lighter object at the same time, they will both drop at the same time due to gravity?
Answer:
[tex]\huge\boxed{True.}[/tex]
Explanation:
This is true because gravity is independent of mass. Whether it's a heavy or a light object, when dropped, they both will hit the ground at the same time. The reason is that gravity does not depend on mass.
Hope this helped!
~AnonymousHelper1807Which of these objects could be falling with constant acceleration?
Answer:
1 and 2
Explanation:
If an object has constant acceleration, it's displacement at time t is:
Δx = v₀ t + ½ at²
For object 1:
0.44 = (0) (0.3) + ½ a (0.3)²
a = 9.78
3.14 = (0) (0.8) + ½ a (0.8)²
a = 9.81
So object 1's acceleration is approximately constant.
For object 2:
0.06 = (0) (0.3) + ½ a (0.3)²
a = 1.33
3.09 = (0) (2.1) + ½ a (2.1)²
a = 1.40
So object 2's acceleration is approximately constant.
For object 3:
0.44 = (0) (0.3) + ½ a (0.3)²
a = 9.78
3.09 = (0) (2.1) + ½ a (2.1)²
a = 1.40
So object 3's acceleration is not constant.
__________ is a severe condition that occurs from extreme exposure to the sun.
A. Heat stroke
B. Bulimia
C. Hypothermia
D. Sun burn
Answer:
Heat stroke
Explanation:
Two point charges +3 micro coulomb and +8 micro coulomb repel each other with a force of 40N . If a charge of -5 micro coulomb is added to each of them, then the force between them will become?
Answer:
1 N
Explanation:
Given that two point charges +3 micro coulomb and +8 micro coulomb repel each other with a force of 40N.
Let us first calculate the distance between the two point charges
F = (KQq)/r^2
Where K = 9.0 × 10^9Nm^2C^-2
40 = (9×10^9 × 3×10^-6 × 8×10^-6)/r^2
Make r^2 the subject of formula
r^2 = 0.216/40
r = sqrt (5.4^-3)
r = 0.0735 metres
If a charge of -5 micro coulomb is added to each of them, then the force between them will become?
Using the same formula again
F = ( KQq)/r^2
Where Q = 8 - 5 = +3 × 10^-6 C
q = 3 - 5 = - 2 × 10^-6 C
F = ( 9×10^9 × 3×10^-6 × 2×10^-6 )/5.4×10^-2
F = 0.054/0.054
F = 1 N
The force of attraction between the two point charges will be 1 N
see attached file below
Explanation:
The velocity vs time graph is linear from 0s to 2s, so the acceleration is constant.
A biker starting from rest reaches a final speed of 3.0 m/s in 3 seconds. What is the acceleration of the biker?
Answer:
1 m/s²
Explanation:
Given:
v₀ = 0 m/s
v = 3.0 m/s
t = 3 s
Find: a
a = (v − v₀) / t
a = (3.0 m/s − 0 m/s) / 3 s
a = 1 m/s²
Question 10 of 15
Which of the following are not phases of matter?
A. Gas
B. Mixture
€. Liquid
D. Compound
E. Solid
Answer:
B. and D.
Explanation:
phases of matter are solid liquid and gas
Answer:
b and d
Explanation:
phases are solid liquid and gas
Why is the pressure so high deep inside the outer planets?
Answer:
they a giant ball of gases, so the answer is they have very large gas masses
Explanation:
Answer:
get G OA S S E d
Explanation:
d gasses are large
function of osteoblasts in the body
Answer:
They provide structure and support.
Explanation:
A rock is thrown straight upward with an initial velocity of 20 m/s where the downward acceleration due to gravity is -10 m/s^2. How long is the ball in the air before it returns to the thrower's hand?
Answer:
4 seconds
Explanation:
Given:
Δy = 0 m
v₀ = 20 m/s
a = -10 m/s²
Find: t
Δy = v₀ t + ½ at²
0 m = (20 m/s) t + ½ (-10 m/s²) t²
0 = 20t − 5t²
0 = 5t (4 − t)
t = 4
How many significant figures?
5.0001
O None of these are correct
O 5
02
0 1
5
if zero falls between two significant numbers it becomes significant.
List the planets that have MORE THAN 3 moons.
Answer:
jupiter they have 79 moons,saturn has 62,uranus has 27,neptune has 14,pluto has 5,
Explanation:
Which source of energy would you prefer for cooking and why?
Answer:
gas
Explanation:
because It is fast and easy
A rowboat that is traveling 2.5m/s to the north, encounters a current traveling 4.3m/s to the east. What is the resultant velocity of the rowboat, including the angle?
What claim can you make about the relationship between energy and mass?
Please help me on this position-time graph assignment!!!
[tex]\text{Hello there! :)}[/tex]
[tex]\text{The velocity is essentially the slope of the graph in a position vs. time graph, so:}[/tex]
[tex]\text{Given: From 0 - 8 sec, velocity of 10 m/s.}\\\\\text{From 8 - 18 sec, velocity of -5 m/s. (In opposite direction because of the negative sign)}\\\\\\\text{From 18 - 22 sec, velocity of 0 m/s. (Object at rest)}\\\\\text{From 22 - 24 sec, velocity of 5 m/s.}\\\\\text{Graph the position vs. time graph using the velocities as the slope of the line }[/tex]