Answer:
The volume of the container is 249.367 cm³
Explanation:
Density is defined as the property that matter, whether solid, liquid or gas, has to compress into a given space. In other words, density is a quantity that allows us to measure the amount of mass in a certain volume of a substance. Then, the expression for the calculation of density is the quotient between the mass of a body and the volume it occupies:
[tex]density=\frac{mass}{volume}[/tex]
From this expression it can be deduced that density is inversely proportional to volume: the smaller the volume occupied by a given mass, the higher the density.
Density, according to the International System of Units, is usually expressed in kilogram per cubic meter (kg/m³) or gram per cubic centimeter (g/cm³).
In this case:
density= 0.790 g/cm³mass= 197 gvolume= ?Replacing:
[tex]0.790 \frac{g}{cm^{3} } =\frac{197 g}{volume}[/tex]
Solving:
[tex]volume=\frac{197 g}{0.790 \frac{g}{cm^{3} } }[/tex]
volume= 249.367 cm³
The volume of the container is 249.367 cm³
What are the 2 common uses for Copper?
What is a subcript? Give an example.
Answer:
subscript is a character
Explanation:
A subscript is a character (such as a number or letter) that is set slightly below or above the normal line of type, respectively. It is usually smaller than the rest of the text.
Necesito su nomenclatura UIQPA
Answer:
3,3 Methyl hexyne
I hope it's helps you
Who discovered electrons
during tbe 1880s and 90s scientist searched cathode rays for the carrier of the electrical properties in matter. the person who discovered Thomson of the electron of 1897.
A gas has a pressure of 1.00 atm at 25 degrees Celsius. What is the pressure of the gas at 323 degrees Celsius.
Please help thanks.
Answer:
The pressure of the gas at 323 degrees Celsius is 2 atm.
Explanation:
Gay-Lussac's law indicates that, as long as the volume of the container containing the gas is constant, as the temperature increases, the gas molecules move faster. Then the number of collisions with the walls increases, that is, the pressure increases. That is, the pressure of the gas is directly proportional to its temperature.
In short, when there is a constant volume, as the temperature increases, the pressure of the gas increases. And when the temperature is decreased, the pressure of the gas decreases.
Gay-Lussac's law can be expressed mathematically as follows:
[tex]\frac{P}{T} =k[/tex]
Where P = pressure, T = temperature, K = Constant
Having two different states, an initial state 1 and a final state 2, it is satisfied:
[tex]\frac{P1}{T1} =\frac{P2}{T2}[/tex]
In this case:
P1= 1 atmT1= 25 C= 298 K (being 0 C= 273 K)P2= ?T2= 323 C= 596 KReplacing:
[tex]\frac{1 atm}{298 K} =\frac{P2}{596 K}[/tex]
Solving:
[tex]P2=\frac{1 atm}{298 K}*596 K[/tex]
P2= 2 atm
The pressure of the gas at 323 degrees Celsius is 2 atm.
225.0 mL of air is at 23.0°C. What is the volume at 90.0 °C?
Answer:
276 mL
Explanation:
Using Charles law equation as follows:
V1/T1 = V2/T2
Where;
V1 = initial volume (mL)
V2 = final volume (mL)
T1 = initial temperature (K)
T2 = final temperature (K)
According to the information provided in this question;
V1 = 225mL
V2 = ?
T1 = 23°C = 23 + 273 = 296K
T2 = 90°C = 90 + 273 = 363K
Using V1/T1 = V2/T2
225/296 = V2/363
Cross multiply
296 × V2 = 363 × 225
296V2 = 81675
V2 = 81675/296
V2 = 275.9
V2 = 276 mL
A process used to gain knowledge through observation and investigation is?
science
math
physics
energy
matter
Answer:matter
Explanation:
matter
make brain
Question 25 of 33
Which statement describes a periodie trend of brstionization energy?
A It tends to increase from top to bottom of a group
B. It remains the same within a period
c. It tends to decrease from top to bottom of a group
D. It tends to decrease from left to right across a period
Answer:
A) It tends to increase from top to bottom of a group
How much heat is absorbed if a 30.0 gram sample of carbon is heated from 10.5 degrees Celsius to 22.2 degrees celsius
Answer:
A lot of heat
Explanation:
Molar mass of 500g of Cl2
Explanation:
What's Your Question ??..
Given the data table below, which metal will take the least amount of
energy to increase its temperature?
metal. c(j/gk)
Al. 0.921
Ba. 0.201
Mg. 1.04
Ni. 0.502
K. 0.754
Answer:
Barium
Explanation:
The specific heat of a material is a property defined as the amount of energy required to increase the temperature of 1g of this material in 1°C = 1K
In this way, the metal that takes the least amount of energy to increase its temperature is the metal that has the lowest specific heat.
In the problem, this metal is Barium (Ba = 0.201J/gK)
A 45.0 cm3 sample of gas is heated from 280. K to 315 K. What is the new volume of the gas sample?
Answer:
50.63 cm³
Explanation:
Using Charles law equation as follows:
V1/T1 = V2/T2
Where;
V1 = initial volume (cm³)
V2 = final volume (cm³)
T1 = initial temperature (K)
T2 = final temperature (K)
According to the question, V1 = 45.0 cm³, V2 = ?, T1 = 280 K, T2 = 315 K
Using; V1/T1 = V2/T2
45/280 = V2/315
Cross multiply
45 × 315 = 280 × V2
14175 = 280V2
V2 = 14175 ÷ 280
V2 = 50.625
V2 = 50.63 cm³
Si la masa de una muestra de un compuesto Y es de 196 gramos y contiene 2 mol, la masa molar de Y es
Answer:
98 g/mol
Explanation:
La masa molar de un compuesto es la cantidad de materia (medida como masa) que hay en 1 mol de dicho compuesto. Por lo tanto, puede calcularse como sigue:
masa molar = masa/número moles
Tenemos los siguientes datos del compuesto Y:
masa Y = 196 g
número de moles de Y = 2 mol
Entonces, podemos calcular la masa molar de Y de la siguiente manera:
masa molar Y = (masa Y)/(número de moles de Y) = 196 g/2 mol = 98 g/mol
Which of the following organs produce enzymes that help chemical digestion happen?
A liver
B small intestine
C large intestine
D rectum
Answer:
A liver
B small intestine
Escaping from the haunted house, Anna ran home immediately to her chemistry lab
back at the high school. After analysis of the gold heart, she found the heart was not
composed of pure gold, but gold (III) oxide (Au203). What percentage (by mass) was
gold in the heart?
a) 10.9% Au
C) 89.1% Au
b) 81.2% Au
d) 92.9% Au
WILL GIVE BRAINLIEST!!!
What is the mass of NaCl required to make 160 grams of a 32% solution of NaCl in water?
Answer:
19.20 g. Explanation: ∵ mass % = [mass of solute/mass of solution] x 100
aluminum oxide solube or insolube
Answer:
Reaction with water: Aluminum oxide is insoluble in water and does not react like sodium oxide and magnesium oxide.
Mr. Romeo wants to make a solution of NaOH. He measures out 97.68 grams and puts it into 3 liters
What is the molarity of the solution he created? Round to 2 Decimal points
Answer: Molarity of the solution is 0.813 M.
Explanation:
Given : Mass of NaOH = 97.68 g
Volume of solution = 3 L
The molar mass of NaOH is 39.99 g/mol. Hence, moles of NaOH are calculated as follows.
[tex]No. of moles = \frac{mass}{molar mass}\\= \frac{97.68 g}{39.99 g/mol}\\= 2.44 mol[/tex]
Molarity is the number of moles of solute present in a liter of solution. Therefore, molarity of given solution is calculated as follows.
[tex]Molarity = \frac{no. of moles of solute}{Volume (in L)}\\= \frac{2.44 mol}{3 L}\\= 0.813 M[/tex]
Thus, we can conclude that molarity of the solution is 0.813 M.
Which feature causes a gap in the geologic record?
extrusion
fault
o intrusion
erosion
Answer:
Hi, there the answer is
A)extrusion
Explanation:
The feature that causes a gap in the geologic record is called extrusion.
What is extrusion in geologic record?Sometimes magma can force itself through a crack or fault in the rock at the Earth's surface. It pours out over the Earth's surface in a volcanic eruption. This process is called extrusion. The rocks that form from extruded magma are called extrusive igneous rocks.
Direct Extrusion, Indirect Extrusion, Hydrostatic Extrusion and Lateral or Vertical Extrusion are some types of extrusion.
Lava that hardens on the surface is called an extrusion. The rock layers below an extrusion are always older than the extrusion. Beneath the surface, magma may push into bodies of rock. There, the magma cools and hardens into a mass of igneous rock called an intrusion.
Therefore, The feature that causes a gap in the geologic record is called extrusion.
Learn more about extrusion, here:
https://brainly.com/question/30554658
#SPJ5
Why must a special saw be used when removing a cast?
A. Because it is very painful to have a cast removed.
B. Because a cast is made of material that requires a special saw.
C. Because a regular saw is not strong enough to cut the cast.
D. Because a regular saw might cut a person’s skin.
3 miles of NaCl in 12 liters of water
What is the molarity
Answer:
[tex]12 \: litres \: contain \: 3 \: \: moles \: of \: sodium \: chloride \\ 1 \: litre \: will \: contain \: \frac{(1 \times 3)}{12} moles \\ = 0.25 \: mol \: {l}^{ - 1} [/tex]
Explanation:
[tex]12 \: litres \: contain \: 3 \: \: moles \: of \: sodium \: chloride \\ 1 \: litre \: will \: contain \: \frac{(1 \times 3)}{12} moles \\ = 0.25 \: mol \: {l}^{ - 1} \\ or : 0.25 \: M[/tex]
What is the systematic name of the following compound?
CaF 2
Which statement best describes the most likely temperatures of Portland, Oregon, and Eugene, Oregon, on this day in January?
А
Eugene was a little colder than Portland because Eugene is a little closer to the coast.
B
Portland was a little colder than Eugene because Portland is a little farther to the north.
С
Portland was much colder than Eugene because Portland was north of the polar jet stream.
a
D
Eugene was much colder than Portland because Eugene was south of the polar jet stream.
Answer: Hello, There your Answer is Below.
A. Eugene was a little colder than Portland because Eugene is a little closer to the coast.
Explanation:
Hope this Helps you!!
Have a great day!!!
How do you write the formula for the combination of 2 chemicals?
example: al3+, br1-, and o2- combined would be what?
Explanation:
[tex]Al(Br)O _{3} \\ name \: = > \: aluminiummonobromo(iii)oxide[/tex]
If a response is towards a stimulus it's described as _______; if a response is away from the stimulus it's described as _____.
Answer: Positive tropism, negative tropism
Explanation:
Stimulus can be define as external and internal agent which generate a response in an organism. If the growth and action is towards the stimulus it is called as positive tropism. If the growth and action is away from the stimulus it is called as negative tropism. Example, the growth of the stem towards the sunlight is called positive tropism whereas the growth of the root away from the sunlight is called negative tropism. Here, sunlight is the stimulus.
name two enzyme used to make alcohol
Answer:
here is your answer
Cellulase and proteases are two enzymes are used for making alcohol
hope it helps you
Explanation:
pwlss giv meh brainless
the answers that can be written down are at the bottom
Answer:
increasing / protons / periods / groups / center / far right / similar
Which daughter element is produced from the beta decay of 145/56 Ba?
The daughter element is produced from the beta decay of ¹⁴⁵₅₆Ba is ¹⁴⁵₅₇La.
What are beta particles?A beta particle is emitted from the nucleus of an atom during radioactive decay. The electron, however, occupies regions outside the nucleus of an atom.
Beta particle has no mass and minus charge on itself.
Radioactive decay equation for the Barium is shown as follow:
¹⁴⁵₅₆Ba → ¹⁴⁵₅₇La + °₋₁β
The daughter element which is produced from the from reaction is Lanthanum.
Hence, ¹⁴⁵₅₇La is the daughter element.
To know more about beta decay, visit the below link:
https://brainly.com/question/11117468
#SPJ2
topic:
surface area
(multiple choice)
irrelevant answers will be reported
Why does chemical changes lead to the formation of compounds.Justify
Answer:
The addition of energy through the chemical reaction when substance combines and gets decomposed.
Explanation:
Chemical changes take place when the substance combines with some other to form a chemical synthesis and gets alternatively decomposed into 2 different substances through chemical reactions. As when the chemical reactions occur the atoms rearrange themselves. As these are accompanied by the energy changes. Such as those of sodium and water to produce sodium hydroxide and hydrogen. The chemical changes are found in organic, inorganic, and biochemical changes.