A compound ‘X’ is used for drinking, has pH =7.Its acidified solution undergoes decomposition in presence of electricity to produce gases ‘Y’ and ‘Z’ The volume of Y is double than Z. Y is highly combustible whereas Z is supporter of combustion. Identify X, Y & Z and write the chemical reactions involved.

Answer:

2+

Explanation:

Apex lolz

Answer : The net ionic equation will be,

[tex]H^{+}(aq)+OH^{-}(aq)\rightarrow H_2O(l)[/tex]

Explanation :

In the net ionic equations, we are not include the spectator ions in the equations.

Spectator ions : The ions present on reactant and product side which do not participate in a reactions. The same ions present on both the sides.

The given balanced ionic equation will be,

[tex]HCl(aq)+NH_4OH(aq)\rightarrow NH_4Cl(aq)+H_2O(l)[/tex]

The ionic equation in separated aqueous solution will be,

[tex]H^+(aq)+Cl^-(aq)+NH_4^+(aq)+OH^-(aq)\rightarrow H_2O(l)+NH_4^+(aq)+Cl^-(aq)[/tex]

In this equation, [tex]NH_4^+\text{ and }Cl^-[/tex] are the spectator ions.

By removing the spectator ions from the balanced ionic equation, we get the net ionic equation.

The net ionic equation will be,

[tex]H^{+}(aq)+OH^{-}(aq)\rightarrow H_2O(l)[/tex]

Energy storage and transport. Chemical energy transport.

Answer:

to clean the water

Explanation:

Answer:

1:1

Explanation:

There is one mole of zinc (Zn) and one mole of zinc sulfate (ZnSO₄).

The mole ratio is 1:1.

Hope this helps.

Answer:

1:1

Explanation:

answer:

a)1.274 g b) 0.013 mole

Explanation:

a) Mass of 1 mol of CuSo4. 5H20=

[tex]63 + 32 + (16 \times 4) + (7 \times 1) + (16 \times 5)[/tex]

=246g

no. moles of CuSo4. 5H2O=

[tex] \frac{mass}{mass \: of \: 1mole} [/tex]

so moles

=

[tex] \frac{3.14}{246} [/tex]

0.013 mole

in the equation

1 mole of sulphuric acid reacts to form 1 mole of CuSo4.5H2O

in other words

0.013 mole of sulphuric acid reacts to form 0.013 mole of CuSo4.5H2O

so mass of 1 mole (Mr) H2So4=

[tex](2 \times 1) + 32 + (16 \times 4)[/tex]

98g

mass of sulphuric acid= mole × mass of 1 mole

so mass= 0.013 × 98

1.274 g

b) In the equation

1 mole of sulphuric acid reacts to form 1 mole of copper(ll) oxide

in other words

0.013 mole of sulphuric acid reacts to form 0.013 mole of copper (ll) oxide

so 0.013 mole of copper(ll) oxide is reacted

Hope it helped and pls mark brainliest

Answer:

B

Explanation:

DuPont created the first acrylic fibers in 1941 and trademarked them under the name Orlon.

Answer:

i metal

ii nonmetal

iii metal

iv nonmetal

Explanation:

If you look up what the element of a heater is, you get a picture of some sort of rod. It's the heating element of the heater, and must be some type of metal to conduct electricity and warm up. Fishing rods are made of either fiberglass, graphite, or carbon fibre. These are nonmetals. In order for a lightning rod to conduct electricity and bring the lightning down to the ground, it has to be metal. You wouldn't want a metal oven mitt, as that would burn your hand.

Answer:

200 grams is the mass of 15% of the solution of lime that is formed by dissolving 30g of calcium hydroxide in water.

Explanation:

Mass of solution = M

Mass percentage of the solution of lime = 15%

Mass of lime or calcium hydroxide = m = 30 g

The Formula of mass percentage is given as :

[tex]m/m\%=\frac{m}{M}\times 100[/tex]

On substituting the values in ab above formula :

[tex]15\%=\frac{30 g}{M}\times 100[/tex]

[tex]M=\frac{30 g}{15}\times 100=200 g[/tex]

200 grams is the mass of 15% of the solution of lime that is formed by dissolving 30g of calcium hydroxide in water.

Answer:

b

Explanation:

a drug problem consumes the bulk of a persons income because drugs are expensive to buy

A drug problem can quickly consume the bulk of a person income

A drug is any chemical substance that causes a change in an organism's physiology or psychology when consumed. Drug abuse or substance abuse refers to the use of certain chemicals for the purpose of creating pleasurable effects on the brain.

Drug use can have significant and damaging short-term and long-term effects. Taking some drugs can be particularly risky, especially if you take high doses or combine them with other drugs or alcohol.

People of any age, sex or economic status can become addicted to a drug. Certain factors can affect the likelihood and speed of developing an addiction.

The best way to prevent an addiction to a drug is not to take the drug at all. If your doctor prescribes a drug with the potential for addiction, use care when taking the drug and follow the instructions provided by your doctor. Thus you can save your income.

The correct answer is option B.

Learn more about drug problem, refer:

https://brainly.com/question/23284149

#SPJ2

Answer:  A.  1.07 x 10∧ -18 J

Explanation:

The energy can be calculated by using this relation; E = hc / ∧

Where E = energy

            h = Planck's constant = 6.626 x 10-34joules

            c  = speed of light =  3.00 x 10∧8 m/s

            ∧  = wavelenght  = 185 nm = 185 x 10∧ -9m

Therefore;  E=  hc / ∧

                     =  (6.626 x 10-34 j/s)  x  ( 3.00 x 10∧8 m/s)  /  185 x 10∧ -9m

                     =    1.987 x 10 ∧ -25 / 185 x 10∧ -9m

                     =  1.07 x 10∧ -18 J

Answer:

x = 25.02 or 25°c

Explanation:

Given:

mass of water : 7.50×10² =750 gm

Ccal = 8.20× 10² = 820 J/°c

Let assume final temp = x°c

then, heat gained by the water + heat gained by calorimeter

= 25400 J

⇒ Mw × Cw× ΔTw+ Ccal ×ΔT = 25400

⇒ 750× 4.184 × (x - 18.6) + 820 ×(x-18.6) = 25400

⇒ x = 25.02 or 25°c

Answer:

95 Kr36

Explanation:

The process by which a large nucleus split into two smaller nuclei is called nuclear fission and occurs after the nucleus has absorbed a neutron that is a product of the radioactive decay of another atom. The formed fission fragments are unstable and extremely radioactive.

Answer:

a. single replacement reaction

Explanation:

Mg(s) + 2HCl(aq)——-> H2(g) + MgCl2(aq)

Mg replaces H, so this is a single replacement reaction.

Answer:

C. If Assertion is true statement but Reason is false.

Explanation:

The burning of magnesium in air produces magnesium oxide as shown by the equation;

2Mg(s) + O2(g) -----> 2MgO(s)

The magnesium oxide solid is recovered as a white ash. This is a typical example of an oxidation reaction which is also a combustion reaction.

The reason has nothing at all to do with the assertion hence the answer given.

Magnesium oxide is basic just like the oxides of other metals and dissolves in water to yield an alkali.

Answer:

Answer:

C. If Assertion is true statement but Reason is false.

Explanation:

The burning of magnesium in air produces magnesium oxide as shown by the equation;

2Mg(s) + O2(g) -----> 2MgO(s)

The magnesium oxide solid is recovered as a white ash. This is a typical example of an oxidation reaction which is also a combustion reaction.

The reason has nothing at all to do with the assertion hence the answer given.

Magnesium oxide is basic just like the oxides of other metals and dissolves in water to yield an alkali.

Explanation:

Answer:

transports solid materials

Explanation:

Erosion is a process where solid materials are transported by natural forces such as wind or water.

Answer: c

Explanation:

Answer:

88 mL of water.

Explanation:

Data obtained from the question include the following:

Volume of alcohol = 12 mL

Percentage of alcohol = 12%

Volume of water =..?

We can thus, obtain the volume of water needed to make 12% of the alcohol solution as follow:

Percentage of the solution = 100%

Percentage of alcohol = 12%

Percentage of water =?

Percentage of water = percentage of solution – percentage of alcohol

Percentage of water = 100 – 12

Percentage of water = 88%

Since 12% of alcohol is equivalent to 12 mL of alcohol, therefore 88% of water will also be equivalent to 88 mL.

Therefore, 88 mL of water is needed to make 12% of alcohol.

to remove iodine sublime

to remove sand filter

to remove water evaporate

Explanation:

1. put the mixture in a beaker

2.Heat the mixture using a watch glass filled with cold water, the iodine will sublime at the base of the watch glass.

3.Add water to sand and salt. Stir for salt to diffuse in the water

4.Filter sand from the solution using a filter paper

5.evaporate the remaining water to remain with Salt crystals.

Answer:

B

Explanation:

plz follow me and give brainliest

Answer:

Fundamental Units:

1) Fundamental units also called base units are used to describe base quantities

2) They cannot be expressed in terms of derived units.

3) Examples : Meter, Ampere, Second etc.

Derived Units:

1) Derived units are used to describe derived quantities.

2) They can be expressed in terms of fundamental units.

3) Examples: Newton, Joule, Hertz, Pascal etc.

Answer:

3diferences

Explanation:

fundamental are independent but derived are dependent

there are 7fundamental units but there are many derived units from fundamental.

meter, second, kilogram, etc are examples of fundamental but m/s^2, newton, joule, etc are derived units

Answer:OD. Producing light

Explanation:

Answer:

Ability to form four covalent bonds.

Explanation:

Carbon is the first member of group 14. It is essentially a nonmetal. It is a small atom which regularly exhibits tetra valency. This means that carbon is able to form four covalent bonds to four chemical species which may be the same or different each time. This leaves room for many different possible combination patterns of carbon with other chemical species.

Hence carbon forms a very large number of compounds due to its small size and its ability for form four covalent bonds to other chemical species in any bonding situation.

Answer: the ability to form four covalent bonds

Explanation:

Answer:

poor access to health care providers

Explanation:

without health care providers you cant get tested.

Answer:

A. Supersaturated

Explanation:

i got it right on edge 2021

The heated solution that holds more dissolved solution than it can hold at a lower temperature is supersaturated solution. Therefore, option A is correct.

A solution that contains more solvent than the typical amount that can dissolve at a specific temperature is said to be supersaturated. By introducing a tiny solute crystal known as a seed crystal, the excess dissolved solvent in a super-saturated solution can begin to recrystallize.

A solution that contains more solvent than the typical amount that can dissolve at a specific temperature is said to be supersaturated. A solution is considered supersaturated if it contains more solute than is necessary to saturate it.

A solution that contains more solute than it can hold at a specific temperature is said to be supersaturated. Usually, raising a solution's temperature causes more particles to dissolve, increasing the solute concentration.

Thus, option A is correct.

To learn more about supersaturated solution, follow the link;

https://brainly.com/question/1432936

#SPJ6

Answer:

A.

Explanation:

The amount of mass always stays the same, matter cannot be created nor destroyed, it can only change forms. Thus, the answer is A.  

In a chemical reaction the total mass of all the substances taking part in the reaction remains the same. Also, the number of atoms in a reaction remains the same. Mass cannot be created or destroyed in a chemical reaction.

I hope this helps..

Answer:

If you know the number of protons and neutrons you have to simply subtract the number of neutrons by number of protons the answer will be number of neutron

Explanation:

Answer:

We can find the amount of electrons through its Atomic number and with the help of electronic configuration

Answer:

pseudoscience

Explanation:

srry that this is so late btw, hope this helps...

Answer:

Science

Explanation:

First response is NOT correct

Answer:

Answers are in the explanation

Explanation:

Precision and accuracy are both statistical concepts. Precision is about how close are the measured values to each other. Accuracy is closeness of the measured values to a specific value or reference value.

There are many ways to calculate precision and accuracy, one is stimating precision as Relative Uncertainty and accuracy as Relative Error.

Formulas are:

Relative Uncertainty: Standard desviation /  Measured value.

Relative Error: Measured Value - Expected Value / Expected value

Measured value is the aveage of the values.

For student 1:

Mean = 25

Standard desviation = 1.5275

Relative Uncertainty: 1.5275 /  25

Relative Uncertainty: 0.061

Relative Error: 25 - 20 / 20

Relative Error: 0.25

For student 2:

Mean = 24.5

Standard desviation = 0.5477

Relative Uncertainty: 0.5477 / 24.5

Relative Uncertainty: 0.02

Relative Error: 24.5 - 20 / 20

Relative Error: 0.225

As the student 2 has a low Relative error and uncertainty, you can say student 2 is more accurate and precise

Explanation:

Before proceeding to answering the question, we have t understand what we mean by both mixture and compound.

A mixture is the physical combination of two or more substances in which the identities are retained and are mixed in the form of solutions, suspensions and colloids.

A compound on the other hand is a chemical substance composed of many identical molecules composed of atoms from more than one element held together by chemical bonds.

The two other reason why H2SO4 is a compound and not a mixture are;

1)  The components which are Hydrogen, Sulphur and Oxygen cannot be separated by physical means.

2) It has a constant melting and boiling point.