a compound pendulum consists of a 1.12-m stick pivoted at a small hole drilled at a distance d from the middle of the stick. if the period of oscillation is 3.20 s, find d.

The sound level emitted by the vacuum cleaner is 66.53 dB, which is equivalent to the sound level of a normal conversation or a dishwasher.

To calculate the sound level in decibels (dB) from the intensity of a sound wave emitted by a vacuum cleaner, we need to use the following formula:

Sound level (dB) = 10 log (I/I0)

where I is the intensity of the sound wave in watts per square meter (W/m2), and I0 is the reference intensity, which is usually taken to be 1 picowatt per square meter (10^-12 W/m2).

In this case, the intensity of the sound wave emitted by the vacuum cleaner is given as 4.50 µw/m2, which is equivalent to 4.50 x 10^-6 W/m2. Therefore, we can calculate the sound level in dB as:

Sound level (dB) = 10 log (4.50 x 10^-6/10^-12)

Sound level (dB) = 10 log (4.50 x 10^6)

Sound level (dB) = 10 x 6.6532

Sound level (dB) = 66.53 dB

For more such questions on sound level:

https://brainly.com/question/30101270

#SPJ11

The sound level emitted by the vacuum cleaner is 66.53 dB, which is equivalent to the sound level of a normal conversation or a dishwasher.

To calculate the sound level in decibels (dB) from the intensity of a sound wave emitted by a vacuum cleaner, we need to use the following formula:

Sound level (dB) = 10 log (I/I0)

where I is the intensity of the sound wave in watts per square meter (W/m2), and I0 is the reference intensity, which is usually taken to be 1 picowatt per square meter (10^-12 W/m2).

In this case, the intensity of the sound wave emitted by the vacuum cleaner is given as 4.50 µw/m2, which is equivalent to 4.50 x 10^-6 W/m2. Therefore, we can calculate the sound level in dB as:

Sound level (dB) = 10 log (4.50 x 10^-6/10^-12)

Sound level (dB) = 10 log (4.50 x 10^6)

Sound level (dB) = 10 x 6.6532

Sound level (dB) = 66.53 dB

Visit to know more about Sound level:-

brainly.com/question/30101270

#SPJ11

The elastic modulus of this tendon is approximately 8.89 N/mm².  The elastic modulus of the animal tendon is 5.37 MPa.  

Stress = Force/Area
Area = pi*(diameter/2)^2 = pi*(9.0 mm/2)^2 = 63.62 mm^2
Stress = 13 N / 63.62 mm^2 = 0.204 MPa
Strain = Change in length/Original length
Strain = 3.8 mm / 13 cm = 0.038
Now, we can use the formula for elastic modulus:
Elastic Modulus = Stress/Strain
Elastic Modulus = 0.204 MPa / 0.038
Elastic modulus = 5.37 MPa



Elastic Modulus (E) = (Force × Original Length) / (Area × Extension)
First, we need to calculate the cross-sectional area (A) of the tendon, which is given by the formula for the area of a circle:
A = π × (d/2)^2
Where d is the diameter (9.0 mm).
A = π × (9.0/2)^2 ≈ 63.62 mm²
Next, we have the original length (L) = 13 cm = 130 mm, the extension (∆L) = 3.8 mm, and the force (F) = 13 N. Now, we can plug these values into the formula:
E = (13 N × 130 mm) / (63.62 mm² × 3.8 mm)
E ≈ 8.89 n/mm²

To know more about  elastic modulus visit:-

https://brainly.com/question/30505066

#SPJ11

The discharge through the channel for a normal depth of 5ft with n = 0.013 and S = 0.02% is approximately 39.13 cubic feet per second, with a width of 10ft and a depth of 5ft.

To determine the discharge through the following sections for a normal depth of 5ft with n = 0.013 and S = 0.02%, we need to use the Manning's equation. Manning's equation is used to calculate the flow rate of water in an open channel. It is given as Q = (1/n) * A * R^(2/3) * S^(1/2), where Q is the discharge, n is the Manning's roughness coefficient, A is the cross-sectional area of the channel, R is the hydraulic radius, and S is the slope of the channel.
Assuming the channel is rectangular, the cross-sectional area is given as A = b * d, where b is the width of the channel and d is the depth of the water. For a normal depth of 5ft, we can assume d = 5ft.
The hydraulic radius is given as R = A/P, where P is the wetted perimeter. For a rectangular channel, P = 2b + 2d. Therefore, P = 2b + 10ft.
The slope of the channel is given as S = 0.02% or 0.0002.
The Manning's roughness coefficient for the channel is given as n = 0.013.
Substituting these values into the Manning's equation, we get Q = (1/0.013) * b * 5ft * ((b + 10ft)/(2b + 10ft))^(2/3) * (0.0002)^(1/2).
To solve for the width of the channel, we can use trial and error or an iterative method. Assuming a width of 5ft, we get a discharge of 17.34 cubic feet per second. However, this is not equal to the discharge we want to achieve.
We can try again with a different width of 10ft, which gives a discharge of 39.13 cubic feet per second. This is closer to the desired discharge.
Therefore, the discharge through the channel for a normal depth of 5ft with n = 0.013 and S = 0.02% is approximately 39.13 cubic feet per second, with a width of 10ft and a depth of 5ft.

To know more about discharge visit :

https://brainly.com/question/30540307

#SPJ11

The focal length of the makeup mirror is 0.588 meters or approximately 58.8 centimeters.

To find the focal length of a makeup mirror that has a power of 1.70 D (diopters).

We can use the following formula:

f = 1/P

where f is the focal length in meters and P is the power in diopters.

Substituting P = 1.70 D into the formula, we get:

f = 1/1.70 D

f = 0.588 m

Therefore, the focal length of the makeup mirror is 0.588 meters or approximately 58.8 centimeters.

This means that light rays entering the mirror will converge at a distance of 0.588 meters behind the mirror's surface

Learn more about Focal length

brainly.com/question/13091382

#SPJ11

Shaking your wet hands helps to remove excess water because the force of the shaking motion causes the water droplets to be flung off of your hands.

The inertia of the water molecules - when you shake your hands, the water molecules want to continue moving in their current direction, so they are thrown off of your hands and into the surrounding environment. This process is similar to how a dog shakes itself dry after being in water.

This gets rid of the water due to the following reasons:

1. Centrifugal force: When you shake your hands, the motion creates a centrifugal force which pushes the water droplets outward, away from your hands.

2. Inertia: The water droplets have inertia, which means they tend to stay in motion or at rest unless acted upon by an external force. When you shake your hands, you apply a force that causes the droplets to overcome their inertia and move away from your hands.

3. Surface tension: The water on your hands forms droplets due to surface tension. Shaking your hands applies a force that overcomes the surface tension, allowing the droplets to separate from your hands.

So, by shaking your hands, you use centrifugal force, inertia, and the overcoming of surface tension to effectively remove the excess water.

Learn more about water here,

https://brainly.com/question/8624565

#SPJ11

The HST can resolve objects on Earth's surface that are separated by a minimum distance of 0.187 meters, when using 598 nm light.

To determine the minimum separation of two objects that can be resolved by the Hubble Space Telescope (HST), we can use the Rayleigh criterion, which states that two objects can be resolved if the first minimum of the diffraction pattern of one object coincides with the maximum of the diffraction pattern of the other object. This occurs when the angular separation between the objects is:

θ = 1.22 * λ / D

where λ is the wavelength of light (in meters), D is the diameter of the objective mirror (in meters), and θ is the angular separation (in radians).

In this case, we are given that the wavelength of light is 598 nm (or 5.98 x 10^-7 m), and the diameter of the objective mirror is 2.40 m. We can plug these values into the equation above to find the minimum angular separation:

θ = 1.22 * (5.98 x 10^-7) / 2.40

θ = 3.05 x 10^-7 radians

To convert this to an actual distance on Earth's surface, we need to know the distance from the HST to Earth's surface. The altitude of the HST is 613 km, which is equivalent to 6.13 x 10^5 meters. We can use basic trigonometry to find the minimum separation:

Separation = distance * angle

Separation = (6.13 x 10^5) * (3.05 x 10^-7)

Separation = 0.187 meters

Click the below link, to learn more about Hubble Scope Telescope:

https://brainly.com/question/13397217

#SPJ11

The period of the circular motion of the electron is 0.0015 seconds.

The period of circular motion of a charged particle in a uniform magnetic field can be calculated using the formula:

T = 2πm/(qB)

Where T is the period, m is the mass of the particle, q is the charge on the particle, and B is the magnitude of the magnetic field.

Here, the electron is the charged particle. The mass of an electron is 9.11 × 10^-31 kg, and the charge on an electron is -1.6 × 10^-19 C. The radius of the circular path is 15 cm, which is equivalent to 0.15 meters. The magnitude of the magnetic field is 3.0 gauss, which is equivalent to 3.0 × 10^-4 tesla.

Plugging these values into the formula, we get:

T = 2πm/(qB)

T = 2π(9.11 × 10^-31 kg)/(-1.6 × 10^-19 C)(3.0 × 10^-4 T)

T = 0.0015 seconds

The period of the circular motion of the electron is 0.0015 seconds.

To know more about  magnetic field, visit;

https://brainly.com/question/26257705

#SPJ11

The cutoff frequency for a metal surface with a work function of 5.42 eV can be found using the equation:
cutoff frequency = (work function * e) / h

To calculate the cutoff frequency for a metal surface with a work function of 5.42 eV, we can use the formula:

f_cutoff = (1/h) * (work function/e)
where h is Planck's constant (6.626 x 10^-34 J*s), e is the elementary charge (1.602 x 10^-19 C), and the work function is given as 5.42 eV.
First, we need to convert the work function from eV to Joules:
work function = 5.42 eV * (1.602 x 10^-19 J/eV) = 8.68 x 10^-19 J
Plugging in the values, we get:
f_cutoff = (1/6.626 x 10^-34 J*s) * (8.68 x 10^-19 J/1.602 x 10^-19 C)
Simplifying the expression, we get:
f_cutoff = (1.306 x 10^15 Hz)/1
Therefore, the cutoff frequency for this metal surface is 1.306 x 10^15 Hz.

To know more about frequency visit :-

https://brainly.com/question/31938473

#SPJ11

To remove the nail using a crowbar, the carpenter needs to apply a force to overcome the resistance provided by the nail.

Let's assume that the nail is embedded in a piece of wood, and the carpenter is using a crowbar of length Lh to remove it.

The force required to remove the nail can be expressed in terms of the force exerted by the nail on the crowbar, which we can denote as Fnail.

We can break down the force required into two components: the force required to overcome the friction between the nail and the wood, and the force required to lift the nail out of the wood.

The angle between the crowbar and the wood surface is θ, and the length of the part of the crowbar in contact with the wood is Ln.

The force required to overcome friction can be expressed as the product of the coefficient of static friction between the nail and the wood, and the normal force acting on the nail.

The normal force can be calculated as the component of the force exerted by the crowbar perpendicular to the wood surface, which is given by Fnail * sin(θ). Therefore, the force required to overcome friction is:

Frictional force = μs * (Fnail * sin(θ))

where μs is the coefficient of static friction between the nail and the wood.

The force required to lift the nail out of the wood can be expressed as the product of the force required to overcome the resistance offered by the wood around the nail and the mechanical advantage provided by the crowbar.

The mechanical advantage of the crowbar can be calculated as Lh/Ln. Therefore, the force required to lift the nail out of the wood is:

Lifting force = (Fnail * cos(θ)) * (Lh/Ln)

The total force required to remove the nail is the sum of the frictional force and the lifting force:

Total force = Frictional force + Lifting force

Substituting the expressions for Frictional force and Lifting force, we get:

Total force = μs * (Fnail * sin(θ)) + (Fnail * cos(θ)) * (Lh/Ln)

Simplifying this expression, we get:

Total force = Fnail * (μs * sin(θ) + cos(θ) * (Lh/Ln))

Therefore, the force required to remove the nail can be expressed as:

Fpull = Fnail * (μs * sin(θ) + cos(θ) * (Lh/Ln))

To know more about force refer here

https://brainly.com/question/30507236#

#SPJ11

The electron in the hydrogen atom relaxed from the n = 5 level to the n = 2 level, emitting light of λ = 434 nm. The principal level to which the electron relaxed is 2.

When an electron in the hydrogen atom relaxes to a lower energy level, it releases energy in the form of light. This process is known as emission. In this case, we are given that the electron was initially in the n = 5 level and emitted light with a wavelength of λ = 434 nm. We can use the equation ΔE = hc/λ, where ΔE is the energy change, h is Planck's constant, c is the speed of light, and λ is the wavelength.
First, we need to find the energy of the emitted light. Using the given wavelength, we have λ = 434 nm = 4.34 x 10^-7 m. Plugging this into the equation, we get ΔE = hc/λ = (6.626 x 10^-34 J s) x (2.998 x 10^8 m/s) / (4.34 x 10^-7 m) = 4.565 x 10^-19 J.
Next, we need to find the energy level to which the electron relaxed. The energy of a hydrogen atom in the nth energy level is given by E = -13.6/n^2 eV. The change in energy between the initial level (n = 5) and the final level (n = ?) is ΔE = Efinal - Einitial. Substituting in the values, we get 4.565 x 10^-19 J = (-13.6/n^2 eV) - (-13.6/5^2 eV). Solving for n, we get n = 2.
To know more about electron visit:
https://brainly.com/question/12001116

#SPJ11

If Martha has to refocus the telescope, she must move the eyepiece 121.17 cm away from the objective lens in order to focus on the bird

The distance between the objective lens and the eyepiece lens is the sum of their focal lengths, i.e., f = f_obj + f_eyepiece = 120 cm + 2.0 cm = 122 cm.

Using the thin lens equation, 1/f = 1/do + 1/di, where do is the object distance and di is the image distance, we can relate the object distance to the image distance formed by the telescope.

When the telescope is initially focused for distant objects, Martha can assume that the image distance di is at infinity. Therefore, we have:

1/122 cm = 1/60 m + 1/di

Solving for di, we get di = 123.17 cm.

To refocus the telescope on the bird, the eyepiece needs to be moved so that the image distance changes from infinity to 123.17 cm. This means that the eyepiece needs to move by a distance equal to the difference between the current image distance (infinity) and the desired image distance (123.17 cm), which is:

Δd = di - f_eyepiece = 123.17 cm - 2.0 cm = 121.17 cm

So Martha needs to move the eyepiece 121.17 cm away from the objective lens (i.e., toward the eyepiece).

Learn more about objective lens at: https://brainly.com/question/13089087

#SPJ11

Two capacitors of 6.00 f and 8.00 f are connected in parallel. The combination is then connected in series with a 12.0-v battery and a 14.0- f capacitor. We have to find the equivalent capacitance.

To find the equivalent capacitance of the given circuit, which includes two capacitors of 6.00 F and 8.00 F connected in parallel, and then the combination connected in series with a 12.0-V battery and a 14.0-F capacitor, follow these steps:

Step 1: Calculate the capacitance of the parallel combination of the 6.00 F and 8.00 F capacitors using the formula for parallel capacitance:
C_parallel = C1 + C2
C_parallel = 6.00 F + 8.00 F = 14.00 F

Step 2: Calculate the equivalent capacitance of the entire circuit, which includes the 14.00 F parallel combination connected in series with the 14.0 F capacitor. Use the formula for series capacitance:
1/C_equivalent = 1/C_parallel + 1/C3
1/C_equivalent = 1/14.00 F + 1/14.0 F

Step 3: Solve for C_equivalent:
1/C_equivalent = 2/14 F
C_equivalent = 14 F / 2
C_equivalent = 7.00 F

The equivalent capacitance of the given circuit is 7.00 F.

Learn more about capacitors at: https://brainly.com/question/21851402

#SPJ11

The stopping distance of the car is 26.6 meters.

To solve this problem, we need to use the formula:

d = (v^2)/(2μk*g)

Where d is the stopping distance, v is the initial velocity, μk is the coefficient of kinetic friction, and g is the acceleration due to gravity (9.8 m/s^2).

Plugging in the given values, we get:

d = (17^2)/(20.609.8) = 26.6 meters

Therefore, the stopping distance of the car is 26.6 meters. This means that the car will travel 26.6 meters before coming to a complete stop on the wet concrete. It is important to note that the stopping distance depends on the coefficient of kinetic friction, which is lower on wet concrete than on dry concrete. This means that it will take longer for a car to come to a stop on wet concrete than on dry concrete, even if the initial velocity and car weight are the same. It is important to drive cautiously and at reduced speeds in wet conditions to avoid accidents and ensure safety.

For such more questions on distance

https://brainly.com/question/30504303

#SPJ11

The correct answer is d. 25.7 m/s. The tangential velocity of the ball is given by the formula v = 2πr/T, where r is the radius of the circle (in this case half the circumference) and T is the time it takes to complete one revolution.

Using the given values, we have r = 9.00m/2 = 4.50m and T = 0.350s. Substituting these values into the formula, we get: v = 2π(4.50m)/0.350s
v = 25.7m/s
Therefore, the correct answer is d. 25.7m/s.
The tangential velocity of the ball can be calculated using the formula:
Tangential Velocity (v) = Circumference / Time
Given:
Circumference (C) = 9.00 m
Time (t) = 0.350 s
v = 9.00 m / 0.350 s = 25.7 m/s

To know more about velocity visit :-

https://brainly.com/question/14326156

#SPJ11

Mingyu is driving past the scene of an automobile accident. She sees a lot of other people around, so she doesn’t feel that she needs to stop. this is an example of the theory of the bystander effect

The bystander effect is a phenomena whereby others nearby are less inclined to provide assistance while someone is in need. This might occur as a result of the responsibility being distributed among a large number of persons in the crowd. The sufferer frequently endures great suffering since no one nearby pays any attention to them or offers to assist them.

In the example provided, Mingyu is passing an accident site while driving. A social psychology phenomena known as the "bystander effect" states that when other people are around, bystanders are less inclined to assist a victim. This happens because they depend on someone else to step up and lend a hand, which diffuses responsibilities.

Read more about bystander effect on:

https://brainly.com/question/28177772

#SPJ1

The forecast error is |35 - 42| = 7. Forecast for next period = 0.8 * 42 + 0.2 * 35 = 39.2

The forecast error is calculated by subtracting the actual demand from the forecast, then taking the absolute value of the result. In this case,

To calculate the forecast for the next period using an exponential smoothing model with alpha = 0.8, we use the formula:  Forecast for next period = alpha * (last period's demand) + (1 - alpha) * (last period's forecast)

Substituting the given values, we get: Forecast for next period = 0.8 * 42 + 0.2 * 35 = 39.2

Rounding to the nearest whole number, the forecast for the next period using an exponential smoothing model with alpha = 0.8 is 39.

To know more about whole number, refer here:

https://brainly.com/question/29766862#

#SPJ11

The gauge pressure at a depth of 690 m in seawater is approximately 68.01 MPa. At any depth in a fluid, the pressure exerted by the fluid is determined by the weight of the fluid column above that point.

In the case of seawater, the pressure increases with depth due to the increasing weight of the water above. To calculate the gauge pressure at a specific depth, we can use the formula:

[tex]\[ P = \rho \cdot g \cdot h \][/tex]

where P is the pressure, [tex]\( \rho \)[/tex] is the density of the fluid, g is the acceleration due to gravity, and h is the depth.

For seawater, the average density is approximately 1025 kg/m³. The acceleration due to gravity is 9.8 m/s². Plugging in these values and the depth of 690 m into the formula, we can calculate the gauge pressure:

[tex]P = 1025 Kg/m^3.9.8m/s^2.690m[/tex]

Calculating this expression gives us a gauge pressure of approximately 68.01 MPa.

To learn more about pressure refer:

https://brainly.com/question/8033367

#SPJ11

The maximum number of passengers that can ride in the elevator is approximately 40.

The maximum number of passengers that can ride in the elevator can be calculated using the equation: Total mass of elevator and passengers = maximum force / acceleration. First, we need to calculate the total mass of the elevator: Mass of elevator = 700 kg.

Next, we need to calculate the maximum force that the elevator motor can provide: Maximum force = power / velocity. Here, velocity is the constant speed at which the elevator ascends, which is given as 20.0 m / 19.0 s = 1.05 m/s. Power is given as 35 ℎ, which is equivalent to 35 × 10³ W.

Maximum force = 35 × 10³ W / 1.05 m/s = 33333.33 N Now we can calculate the maximum total mass that the elevator can carry:

Total mass = maximum force / acceleration

The acceleration due to gravity is 9.81 m/s².

Total mass = 33333.33 N / 9.81 m/s² = 3393.12 kg

Subtracting the mass of the elevator itself, we get the maximum mass of passengers: Maximum passenger mass = 3393.12 kg - 700 kg = 2693.12 kg

Dividing by the average mass per passenger gives the maximum number of passengers: Maximum number of passengers = 2693.12 kg / 67.0 kg ≈ 40 passengers.

To know more about acceleration, refer here:

https://brainly.com/question/31479424#

#SPJ11

The prescription for the refractive power of the corrective contact lenses for a person with far points of 7.5 m from the right eye and 5.8 m from the left eye is -0.13 D (or nearest available power) for the right eye and -0.17 D (or nearest available power) for the left eye assuming no cylinder correction is needed.

To determine the refractive power of corrective contact lenses for a person with far points of 7.5 m from the right eye and 5.8 m from the left eye, we need to calculate the spherical equivalent (SE) of the person's refractive error.

SE = sphere + 0.5 * cylinder

where sphere is the spherical power of the lens needed to correct the refractive error, and cylinder is the cylindrical power (if any) needed to correct for astigmatism.

Assuming no cylinder correction is needed, the SE can be calculated as follows:

SE_right = (1 / (-7.5 m)) * 1000 mm/m = -0.133 D

SE_left = (1 / (-5.8 m)) * 1000 mm/m = -0.172 D

Therefore, the prescription for the refractive power of the corrective contact lenses would be:

(a) Right eye: -0.13 D (or nearest available power)

(b) Left eye: -0.17 D (or nearest available power)

Note: The prescription for corrective lenses would need to be written by an eye care professional after a thorough eye examination to determine the person's full refractive error and any other visual needs.

To know more about the refractive power refer here :

https://brainly.com/question/31472966#

#SPJ11  

(a) The currents should be in opposite directions.

(b) The amount of current needed is 4.8 A.

The magnetic field at a point halfway between two long straight wires is given by:

B = μ₀I/2πd

where B is the magnetic field, I is the current, d is the distance between the wires, and μ₀ is the permeability of free space.

In this problem, we are given that the distance between the wires is 8.0 cm and the magnetic field at a point halfway between them is 300 μT.

Substituting these values into the equation, we get:

300 x 10⁻⁶ T = (4π x 10⁻⁷ T m/A)I/(2π x 0.08 m)

Simplifying the equation, we get:

I = (300 x 10⁻⁶ T) x (2 x π x 0.08 m) / (4π x 10⁻⁷ T m/A)

I = 4.8 A

Therefore, the amount of current needed is 4.8 A.

To produce a magnetic field of 300 μT at a point halfway between two long straight wires, the currents in the wires should be in opposite directions, and the amount of current needed is 4.8 A.

To know more about magnetic field, visit;

https://brainly.com/question/14411049

#SPJ11

The energy required to melt 16.4 g of ice at 0 ⁰C is 5.46 kJ.

To melt 16.4 g of ice at 0 ⁰C, we need to use the formula:

Energy = mass x ΔH fus

Where ΔH fus is the enthalpy of fusion of water, which is 6.01 kJ/mol.

First, we need to convert the mass of ice from grams to moles:

16.4 g / 18.015 g/mol = 0.91 mol

Next, we can calculate the energy required to melt the ice:

Energy = 0.91 mol x 6.01 kJ/mol = 5.46 kJ

Therefore, the energy required to melt 16.4 g of ice at 0 ⁰C is 5.46 kJ.

It's important to include the units in our answer to make it clear what we are measuring. In this case, the units are in kilojoules (kJ).

To know more about the energy, click here;

https://brainly.com/question/1932868

#SPJ11

It is not possible to determine the probability of occupying one of the higher-energy states at 70.0 k without additional information.

In order to calculate the probability of occupying a higher-energy state at a given temperature, we need to know the distribution of energy levels and the relative probabilities of occupying each state. The distribution of energy levels is determined by the system and its interactions, and cannot be determined solely from the temperature. Additionally, the probabilities of occupying each state depend on the specific system and its interactions, and cannot be determined solely from the temperature. Therefore, without additional information about the specific system and its interactions, it is not possible to calculate the probability of occupying a higher-energy state at a given temperature.

Learn more about probability here :

https://brainly.com/question/30034780

#SPJ11

The velocity of the wave is 173.2 m/s and its frequency is 577.4 Hz. to calculate the velocity of the wave, we can use the equation v = sqrt(T/μ), where T is the tension in the wire and μ is the linear mass density (mass per unit length) of the wire.

In this case, μ = m/L, where m is the total mass of the wire and L is its length. Plugging in the given values, we get v = sqrt(1000 N / (1.5 kg / 300 m)) = 173.2 m/s.

To calculate the frequency of the wave, we can use the equation v = λf, where λ is the wavelength of the wave and f is its frequency. Solving for f, we get f = v/λ = 173.2 m/s / 0.3 m = 577.4 Hz.

Learn more about velocity here:

https://brainly.com/question/17127206

#SPJ11

In the given statement, A rock attached to a string swings back and forth every 4.6 s then  the length of the string is approximately 13.53 meters.

To calculate the length of the string, we need to use the formula for the period of a pendulum, which is T = 2π√(L/g), where T is the period, L is the length of the string, and g is the acceleration due to gravity. In this case, we know that the period is 4.6 s, so we can plug that in and solve for L:
4.6 = 2π√(L/9.8)
2.3 = π√(L/9.8)
(2.3/π)^2 = L/9.8
1.16^2 × 9.8 = L
13.53 ≈ L
So the length of the string is approximately 13.53 meters. This makes sense, as longer strings have longer periods, so the rock on a longer string would take longer to swing back and forth. Therefore, by measuring the period of the pendulum, we can determine the length of the string.

To know more about string visit:

brainly.com/question/9499152

#SPJ11

The modulus of elasticity of the magnesium bar can be calculated using the formula:

Modulus of Elasticity = (Force / Area) / (Change in Length / Original Length)

Substituting the values given in the problem:

Modulus of Elasticity = (20,000 N / (1 cm x 1 cm)) / ((0.045 cm) / 10 cm) = 4,444,444.44 Pa

Converting Pa to GPa and psi:

Modulus of Elasticity = 4.44 GPa or 643,600.79 psi

In simpler terms, the modulus of elasticity measures the stiffness of a material. It is the ratio of the applied stress to the resulting strain in a material. In this problem, we are given the force applied to a magnesium bar, its dimensions, and the resulting change in length.

Learn more about elasticity here:

https://brainly.com/question/30856689

#SPJ11

The tank contains 23 kg of dry air and 0.3 kg of water vapor at 35°C and 88 kPa, with a partial pressure of dry air of 86.3 kPa and a volume of 23.9 m³.

we can calculate the volume of the tank and the partial pressure of the dry air by using the ideal gas law:

First, we need to calculate the mole fraction of water vapor in the tank:

Next, we can calculate the partial pressure of the dry air:

P_total = 88 kPa

P_dry_air = (1 - x_water_vapor) * P_total = 86.3 kPa

Using the ideal gas law, we can calculate the volume of the tank:

V = (n_total * R * T) / P_total

where R is the universal gas constant (8.314 J/(mol*K)), and T is the temperature in Kelvin:

T = 35°C + 273.15 = 308.15 K

V = (0.802 kmol * 8.314 J/(mol*K) * 308.15 K) / 88 kPa = 23.9³

Therefore, the tank contains 23 kg of dry air and 0.3 kg of water vapor at a total pressure of 88 kPa and a temperature of 35°C, with a partial pressure of dry air of 86.3 kPa, and a volume of 23.9 m³.

Learn more about pressure

brainly.com/question/12971272

#SPJ11

The contribution of rotational degrees of freedom to the molar constant volume heat capacity at 298 K for H35Cl (θr = 15.24 K) is given by the following equation:
Cv,m = R + (1/2)R(θr/T)^2
where R is the gas constant, θr is the rotational temperature, and T is the temperature in Kelvin.

The molar constant volume heat capacity, Cv,m, of a gas is the amount of energy required to raise the temperature of one mole of the gas by one Kelvin at constant volume. It is related to the degrees of freedom of the gas molecules, which include translational, rotational, and vibrational degrees of freedom. At room temperature, the rotational degrees of freedom are typically less important than the translational degrees of freedom, but they still contribute to the overall heat capacity of the gas.

For H35Cl, which is a linear molecule, there is only one rotational degree of freedom. The rotational temperature, θr, is a measure of the energy required to excite the molecule from one rotational state to another. It is related to the moment of inertia of the molecule and is given by the equation:

θr = h^2 / 8π^2Ik

where h is Planck's constant, k is Boltzmann's constant, and I is the moment of inertia of the molecule.

At 298 K, the contribution of the rotational degrees of freedom to the molar constant volume heat capacity of H35Cl can be calculated using the above equation for Cv,m. Assuming R = 8.314 J/mol*K, we have:

Cv,m = 8.314 J/mol*K + (1/2)(8.314 J/mol*K)((15.24 K)/(298 K))^2
Cv,m = 8.314 J/mol*K + 0.035 J/mol*K
Cv,m = 8.349 J/mol*K

Therefore, the contribution of the rotational degrees of freedom to the molar constant volume heat capacity of H35Cl at 298 K is 0.035 J/mol*K.

learn more about Boltzmann's constant

https://brainly.com/question/15572777

#SPJ11

Therefore, the length of the third side is 44.02 ft.

To find the length of the third side of the triangular swimming pool, we can use the law of cosines. This law allows us to find the length of a side when we know the lengths of the other two sides and the angle between them. The formula is c^2 = a^2 + b^2 - 2ab*cos(C), where c is the length of the third side, a and b are the lengths of the other two sides, and C is the angle between them.
Plugging in the given values, we get:
c^2 = 44^2 + 32.5^2 - 2*44*32.5*cos(41.1)
c^2 = 1935.19
c = sqrt(1935.19)
c = 44.02 ft (rounded to two decimal places)
The length of the third side of the triangular swimming pool is 44.02 ft. This was calculated using the law of cosines, which relates the lengths of the sides of a triangle to the angle between them. The formula involves squaring the lengths of the sides, adding them together, and subtracting twice their product times the cosine of the angle between them. In this case, the given sides and angle were plugged into the formula to find the length of the third side.

To know more about angle visit:

https://brainly.com/question/14760207

#SPJ11

The half-life of this isotope is 15.7 days. This means that after 15.7 days, the activity of the isotope will have decreased to half of its initial value.

Using the formula for radioactive decay, A=A0e^(-λt), where A is the current activity, A0 is the initial activity, λ is the decay constant, and t is time, we can set up an equation using the given information:

A = A0e^(-λt)

8255 = A0e^(-λ(0))

3110 = A0e^(-λ(4.50 days))

Taking the ratio of the two equations and solving for λ, we get:

λ = ln(8255/3110)/4.50 days = 0.0441 per day

To find the half-life, we can use the formula T1/2 = ln(2)/λ:

T1/2 = ln(2)/0.0441 per day = 15.7 days

Therefore, this isotope has a half-life of 15.7 days. This indicates that after 15.7 days, the isotope's activity will be half of its initial value.  The half-life is an important parameter for understanding the behavior of radioactive materials, and it can be used to calculate decay rates and other properties of the isotope.

To know more about the Isotope, here

https://brainly.com/question/12022207

#SPJ4

Cylinder loses height as it moves down the ramp, causing a decrease in gravitational potential energy. Simultaneously, the cylinder gains speed, resulting in an increase in its kinetic energy. Therefore, the correct answer is (C) Decreases Increases.

As the cylinder rolls down the ramp, the potential energy of the cylinder-Earth system decreases due to the cylinder's decreasing height. At the same time, the kinetic energy of the cylinder increases due to its increasing velocity as it gains speed while rolling down the ramp. Once the cylinder reaches the bottom of the ramp, its potential energy has been fully converted into kinetic energy. As the cylinder travels on the horizontal section of the table, it maintains its constant velocity, so its kinetic energy remains the same. When the cylinder rolls off the table and falls to the ground, its kinetic energy is converted into potential energy as it gains height, but then it is converted back into kinetic energy as it falls to the ground again. Overall, there is no change in the total energy of the system, which remains constant throughout the process.

To know more about Kinetic Energy visit:
https://brainly.com/question/15764612
#SPJ11