Answer:
357 g of the transition metal are present in 630 grams of the compound of the transition metal and iodine
Explanation:
In any sample of the compound, the percentage by mass of the transition metal is 56.7%. This means that for a 100 g sample of the compound, 56.7 g is the metal while the remaining mass, 43.3 g is iodine.
Given mass of sample compound = 630 g
Calculating the mass of iodine present involves multiplying the percentage by mass composition of the metal by the mass of the given sample;
56.7 % = 56.7/100 = 0.567
Mass of transition metal = 0.567 * 630 = 357.21 g
Therefore, the mass of the transition metal present in 630 g of the compound is approximately 357 g
Which set of terms best defines what affects kinetic energy and potential energy, respecrively
15 points! Answer only if you can please!
1. Have you ever grabbed the handle of a hot metal pan? Why did it feel hot to you?
2. What would happen if a person who is wearing a heavy winter jacket were to place a thermometer inside the jacket next to his or her skin? What would happen if we took the same jacket, after it had been hanging in a closet, and placed a thermometer inside?
3. How do you think the transfer of thermal energy causes unpopped popcorn kernels to pop?
Answer:
1. Yes
2. it would be the same i guess
3. because it travels to popcorn kernels with its heat and makes it pop'
did i get it right?
Explanation:
Which isomer of 1-bromo-2-tert-butylcyclohexane reacts faster when refluxed with potassium tert-butoxide?Draw the structure of the expected major product from the faster reacting compound.
Answer:
See explanation and image attached
Explanation:
The reaction of 1-bromo-2-tert-butylcyclohexane with potassium tert-butoxide is an elimination reaction that occurs by E2 mechanism.
The E2 reaction proceeds faster when the hydrogens are in an antiperiplanar position at an angle of 180 degrees.
This is only attainable in the trans isomer of 1-bromo-2-tert-butylcyclohexane. Hence trans 1-bromo-2-tert-butylcyclohexane reacts faster with potassium tert-butoxide
What is required to cause change in matter
Answer:
Adding or removing energy from matter causes a physical change as matter moves from one state to another. For example, adding thermal energy (heat) to liquid water causes it to become steam or vapor (a gas). And removing energy from liquid water causes it to become ice (a solid). ... Most liquids contract as they freeze.
Explanation:
have a nice day
In a laboratory experiment, students synthesized a new compound and found that when 11.01 grams of the compound were dissolved to make 158.1 mL of a ethanol solution, the osmotic pressure generated was 1.91 atm at 298 K. The compound was also found to be nonvolatile and a non-electrolyte. What is the molecular weight they determined for this compound?
Answer:
892 g/mol
Explanation:
Step 1: Given and required data
Mass of the nonvolatile and a non-electrolyte solute: 11.01 gVolume of solution: 158.1 mL = 0.1581 LOsmotic pressure (π): 1.91 atmIdeal gas constant (R): 0.0821 atm.L/mol.KAbsolute temperature (T): 298 KStep 2: Calculate the molarity (M) of the solution
The osmotic pressure is a colligative property that can be calculated using the following expression.
π = M × R × T
M = π / R × T
M = 1.91 atm / (0.0821 atm.L/mol.K) × 298 K
M = 0.0781 M
Step 3: Calculate the molecular weight of the solute
We will use the following expression for molarity.
M = mass of solute / molecular weight of solute × liters of solution
molecular weight of solute = mass of solute / M × liters of solution
molecular weight of solute = 11.01 g / (0.0781 mol/L) × 0.1581 L
molecular weight of solute = 892 g/mol
Which electromagnetic waves have the shortest wavelength?
O A. Microwaves
O B. Radio waves
C. Gamma rays
O D. X-rays
Answer:
Gamma Rays
Explanation:
Each section of the electromagnetic (EM) spectrum has characteristic energy levels, wavelengths, and frequencies associated with its photons. Gamma rays have the highest energies, the shortest wavelengths, and the highest frequencies.
I looked it up
Justin is making a snack. He toasts a piece of bread and first peanut butter and jelly on it. Then he cut an apple into several slices and adds these to his plate. Next Justin mixes a scoop of lemonade powder into a glass of water mixes it in Dad's ice. How many chemical changes occurred in this scenario? 1 2 three or four
Answer:
2
Explanation:
Toasting bread and lemonade powder in water are chemical changes. Pb&j on bread and cutting apple are physical changes.
Answer:
b
Explanation:
which of the following is an isotope of hydrogen
What is a solute?
A material that is dissolved in another material.
O A material in which another material is dissolved.
An area of space surrounding the nucleus.
O Chemical formulas on the left side of an equation.
Argon (Ar) is an element in group 18. Argon is _____.
a gas highly reactive
a metalloid
a good conductor of heat
Answer:
c
Explanation:c
it is a good conducter
What is the structural formula of CF2Br2
Answer:
Dibromodifluoromethane
Explanation:
What is the degree of oxidation of a simple substance
Answer:
The oxidation state of a free element (uncombined element) is zero. For a simple (monoatomic) ion, the oxidation state is equal to the net charge on the ion. For example, Cl– has an oxidation state of -1. When present in most compounds, hydrogen has an oxidation state of +1 and oxygen an oxidation state of -2
The standard enthalpy of vaporization of methanol is 35.2 kJ/mol at its normal boiling point, 64.6°C. What is the standard change in entropy for the vaporization of methanol at its normal boiling point?
A) 0.104 J/(mol middot K)
B) 104 J/(mol middot K)
C) 545 J/(mol middot K)
D) -35.2 J(mol middot K)
E) 0.545 J(mol middot K)
Answer:
B) 104 J/mol.K
Explanation:
Step 1: Given data
Standard enthalpy of vaporization (ΔH°vap): 35.2 kJ/molNormal boiling point (Tb): 64.6 °CStep 2: Convert "Tb" to Kelvin
We will use the following expression.
K = °C + 273.15
K = 64.6°C + 273.15
K = 337.8 K
Step 3: Calculate the standard change in entropy for the vaporization of methanol (ΔS°vap)
The vaporization is the phase transition from the liquid phase to vapor. We can calculate the standard change in entropy for the vaporization using the following expression.
ΔS°vap = ΔH°vap / Tb
ΔS°vap = (35.2 × 10³ J/mol) / 337.8 K
ΔS°vap = 104 J/mol.K
The standard change in entropy for the vaporization of methanol at its normal boiling point is 104 J/mol.K.
How do we calculate entropy of vaporization?Standard change in entropy for the vaporization will be calculated by using the below equation as:
ΔS°vap = ΔH°vap / Tb, where
ΔH°vap = standard enthalpy of vaporization of methanol = 35.2 kJ/mol
Tb = Boiling point of methanol = 64.6°C = 64.6°C + 273.15 = 337.8 K
On putting all these values on the above equation, we get
ΔS°vap = (35.2 × 10³ J/mol) / 337.8 K
ΔS°vap = 104 J/mol.K
Hence option (B) is correct.
To know more about enthalpy of vaporization, visit the below link:
https://brainly.com/question/5602087
8)
C(diamond) → C(graphite)
delta G° = -2.9 kJ/molrxn
Which of the following best explains why the reaction represented above is not observed to occur at
room temperature?
(A) The rate of the reaction is extremely slow because of the relatively small value of AGº for
the reaction.
(B) The entropy of the system decreases because the carbon atoms in graphite are less ordered
than those in diamond.
(C) The reaction has an extremely large activation energy due to strong three-dimensional
bonding among carbon atoms in diamond.
(D) The reaction does not occur because it is not thermodynamically favorable.
Answer: its b hope this helps.
Explanation:
Explain how atoms organize to create larger structures?
Answer:
First of all they are super tiny particles of neutrons, electrons and protons. Then they come together to organize a structure of atom. Atoms come together to form a molecule and smaller molecules work together to form macromolecules. Thus, how they organize and form building blocks of a substance.
Hope it helps!<3
Which reaction takes place in a nuclear fission reactor?
C+HN
2 Put He → Cm
OCO+ He-Cot 'n
o U+ nKr+Ba+3'n
Answer:
The reaction that takes place in a nuclear fission reactor is answer D.
Explanation:
Step-by-step explanation:
Nuclear fission reactions involves the process by which large atomic nuclei are bombarded with energetic particles and release of an enormous amount of nuclear energy, which mainly ends up as heat energy.
So now, consider the nuclear reaction from D, after the uranium nucleus absorbs the neutron its split into two smaller nuclei (often radioactive themselves), Krypton and Barium and releases more neutrons (or energy).
Phosphorus trichloride, PCl3, is commonly used in the chemical industry as a source of phosphorus in various reactions. Indicate the electron pair geometry and the molecular geometry of the PCl3 molecule. Electron pair geometry: T-shaped tetrahedral trigonal planar trigonal pyramidal trigonal bipyramidal Molecular geometry: tetrahedral trigonal pyramidal trigonal bipyramidal trigonal planar T-shaped
Answer:
Electron pair geometry - tetrahedral
molecular geometry- trigonal pyramidal
Explanation:
According to Valence Shell Electron Pair Repulsion Theory, the shape of a molecule is determined by the number of electron pairs around the central atom in the molecule. Lone pairs distort a molecule away from its expected geometry based on VSEPR. This is why the electron pair geometry differs from the actual molecular geometry.
PCl3 has four regions of electron density, three substituents and one lone pair hence its electron pair geometry is tetrahedral. However, the three substituents are arranged in a trigonal pyramidal geometry(its molecular geometry).
HELP ASAPPPP BRAINLIEST
Answer:
2nd option
Explanation:
which two changes of state can be caused by removing thermal energy from a substace A. deposition B. condencation C. vaporization D.sublimation
Answer:
maybe is b but wait to other people answer
Answer:A. deposition B. condencation
Explanation:
1 carbon atom mixed with 1 oxygen atom what is the formula
Answer:
carbon mono oxide CO
Explanation:
as both are in 1:1 ratio so CO is formed
19.
Caustic soda is 20 M NaOH and is olluted for household use. What is the household concentration of 10
mL of the concentrated solution is diluted to 500 ml?
(A) 0.4 M N OH
(B) 400 M NaOH
(C) 4 M NaOH
(D) 20M NaO
Answer:
(A) 0.4M NaOH
Explanation:
The 20M NaOH caustic soda is diluted from 10mL to 500mL, that is:
500mL / 10mL = Is diluted 50 times.
That means we can solve the new concentration of the diluted solution dividing the stock concentration (20M) 50 times:
20M / 50 = 0.4M NaOH is the concentration of the diluted NaOH solution.
Right answer is:
(A) 0.4M NaOHWhat happens after condensation to cause precipitation?
A
The sun heats water on the Earth's surface.
B
Water is absorbed into the ground.
C
Clouds fill with moisture and get too heavy.
D
Excess water runs downhill.
Answer:
The answer is c, Clouds fill with moisture and get too hravy
A system performed 145 kJ of work on the surroundings and absorbed 105 kJ of heat from the surroundings. What is the change in energy of the system?
Answer:
250 kJ
Explanation:
Step 1: Given data
Work performed by the system (w): 145 kJ (By convention, when the system performs work on the surroundings, w > 0)Heat absorbed by the system (q): 105 kJ (By convention, when the system absorbs heat from the surroundings, q > 0)Step 2: Calculate the change in the internal energy of the system
The internal energy of a thermodynamic system is the energy contained within it. We can calculate the change in the internal energy (ΔE°) using the following expression.
ΔE° = q + w
ΔE° = 105 kJ + 145 kJ = 250 kJ
Which terms describe a substance that has a low melting point and poor electrical conductivity?
(1) Metallic and lustrous
(2) Dull and brittle
(3) Brittle and lustrous
(4) Metallic and dull
what is protein denaturation
Answer:
Denaturation is a process in which proteins or nucleic acids lose the quaternary structure, tertiary structure, and secondary structure which is present in their native state, by application of some
Explanation:
ASAP I WILL GIVE BRAINLIEST!Which arrow represents the change of state described above? The diagram shows changes of state between solid, liquid, and gas. The atoms of a substance lose energy during a change of state. After the change, the atoms are close together but are able to slide past one another.
0 L
0 N
0 O
0 P
Answer:
O
Explanation:
The atoms lose energy during a change of state, but can still slide past each other; gas to a liquid.
Answer:
i think the answer is C: O
Explanation:
correct me if im wrong
Need help please? Thanks youu
Answer:
A
B
E
Explanation:
"Fission is the splitting of a heavy, unstable nucleus into two lighter nuclei
and fusion is the process where two light nuclei combine together releasing vast amounts of energy"
a process that releases energy is respiration
Which of the following statements is true?
Electrons have a positive charge.
Protons and neutrons are found in the nucleus.
Electrons and protons are found in the nucleus.
All shells can hold up to eight electrons.
Answer:
2/ Protons and neutrons are found in the nucleus.
Explanation:
Please I have a D in chem and grades close tomorrow ;-;
Which of the following polyatomic lons will form an lonic compound with a single sodium lon?
co₂2-
нсо3^1-
S04^2-
S03^2-
Someone took the last cookie from the cookie jar last night. The last person to leave the scene is the culprit. Who was it? Highlight the guilty culprit based on the clues provided.