A commuter backs her car out of her garage starting from rest with an acceleration of 1. 40m/s2.



How long does it take her to reach a speed of 2. 00 m/s?

The force required to increase the person's volume above water by 0.0027 m³ is 732.85 N.

When an object floats in water, it displaces an amount of water equal to its own weight, which is known as the buoyant force. Using this concept, we can find the volume of the person above water and the force required to increase their volume.

A. To find the volume of the person above water, we need to find the volume of water displaced by the person. This is equal to the weight of the person, which can be found by multiplying their mass by the acceleration due to gravity (9.81 m/s²):

weight of person = 72 kg × 9.81 m/s² = 706.32 N

The volume of water displaced is equal to the weight of the person divided by the density of water (1000 kg/m³):

volume of water displaced = weight of person / density of water = 706.32 N / 1000 kg/m³ = 0.70632 m³

Since the person's volume is given as 0.096 m³, the volume of the person above water is:

volume above water = person's volume - volume of water displaced = 0.096 m³ - 0.70632 m³ = -0.61032 m³

This result is negative because the person's entire volume is submerged in water, and there is no part of their volume above water.

B. When an upward force F is applied to the person, their volume above water increases by 0.0027 m³. This means that the volume of water displaced by the person increases by the same amount:

change in volume of water displaced = 0.0027 m³

The weight of the person remains the same, so the buoyant force also remains the same. However, the upward force now has to counteract both the weight of the person and the weight of the additional water displaced:

F = weight of person + weight of additional water displaced

F = 706.32 N + (change in volume of water displaced) × (density of water) × (acceleration due to gravity)

F = 706.32 N + 0.0027 m³ × 1000 kg/m³ × 9.81 m/s²

F = 732.85 N

Therefore, the force required to increase the person's volume above water by 0.0027 m³ is 732.85 N.

Learn more about force at: https://brainly.com/question/25545050

#SPJ11

Answer:

When heat is applied, the liquid expands moderately

Explanation:

Reason: Particles move around each other faster where the force of attraction between these particles is less than solids, which makes liquids expand more than solids.

To achieve a magnification of 2.0 with a convex lens of focal length 15 cm, you should hold the magnifying glass at a distance of 10 cm from the postage stamp.

To calculate the distance at which you should hold a magnifying glass to achieve a specific magnification, you can use the lens formula: 1/f = 1/v - 1/u, where f is the focal length, v is the distance of the image from the lens, and u is the distance of the object (postage stamp) from the lens. For a magnification (M) of 2.0, we have M = -v/u. Rearranging the formula gives u = -v/2. Now, substitute the focal length (15 cm) into the lens formula and solve for u:

1/15 = 1/v - 1/(-v/2)
1/15 = (2 - 1)/v
v = 30 cm

Now, substitute the value of v back into the magnification formula:
u = -v/2
u = -30/2
u = -15 cm

Since the object distance (u) is negative, it means the actual distance of the object is positive, so you should hold the magnifying glass at 10 cm from the postage stamp.

To know more about the magnification visit:

https://brainly.com/question/27872394

#SPJ11

Using a naive forecasting method, the forecast for next week’s sales volume equals. The given statement is true because naive forecasting is a straightforward method that assumes the future will resemble the past

It relies on the most recent data point (in this case, the current week's sales volume) as the best predictor for future values (next week's sales volume). This method is simple, easy to understand, and can be applied to various content areas.

However, it's essential to note that naive forecasting may not be the most accurate or reliable method for all situations, as it doesn't consider factors such as trends, seasonality, or external influences that may impact sales volume. Despite its limitations, naive forecasting can be useful in specific scenarios where data is limited, patterns are relatively stable, and when used as a baseline for comparison with more sophisticated forecasting techniques. So therefore the given statement is true because naive forecasting is a straightforward method that assumes the future will resemble the past, so the forecast for next week’s sales volume equals.

Learn more about naive forecasting here:

https://brainly.com/question/31580569

#SPJ11

a) The speed of the clay immediately before impact was 0.033 m/s. b) No, static friction could not prevent the block from moving after being struck by the wad of clay if the collision took place in a time interval of 0.100 s.

The initial momentum of the clay and the block is given by:

p = mv = (m₁ + m₂)v₁

After impact, the clay sticks to the block, so the final momentum is:

p' = (m₁ + m₂)v₂

By the law of conservation of momentum, we have:

p = p'

(m₁ + m₂)v₁ = (m₁ + m₂)v₂

v₁ = v₂

The final velocity of the block is given by:

v₂ = √(2umgd/(m₁ + m₂))

where u is the coefficient of friction, m is the mass of the block, g is the acceleration due to gravity, and d is the distance traveled by the block.

Substituting the given values, we get:

v₂ = √(20.6500.1109.817.50/(0.110 + 0.011))

v₂ = 3.01 m/s

Now, the initial momentum of the clay can be found by:

p = mv = (11.0 g)(v₁)

Converting the mass to kg and solving for vi, we get:

v₁ = p/(m₁)

= (0.011 kg)(v₂)

= 0.033 m/s

The force of the wad of clay on the block is greater than the maximum static frictional force that the surface can provide, so the block will continue to slide.

To know more about friction, here

https://brainly.com/question/28356847

#SPJ4

a. Sphere c ends up with a charge of -3q.

b. The total charge on the three spheres before they are allowed to touch each other is 5q - q = 4q.

a. When spheres a and b are touched together and then separated, charge is transferred between them until they reach equilibrium. Since sphere a has a charge of 5q and sphere b has a charge of -q, the total charge transferred is 5q - (-q) = 6q. This charge is shared equally between the two spheres, so sphere a ends up with a charge of 5q - 3q = 2q, and sphere b ends up with a charge of -q + 3q = 2q.

When sphere c is touched to sphere a and separated, they share charge. Sphere a has a charge of 2q, and sphere c has no net charge initially. The charge is shared equally, so both spheres end up with a charge of q.

Similarly, when sphere c is touched to sphere b and separated, they also share charge. Sphere b has a charge of 2q, and sphere c has a charge of q. The charge is shared equally, so both spheres end up with a charge of (2q + q) / 2 = 3q/2.

Therefore, sphere c ends up with a charge of -3q (opposite sign due to excess electrons) and the total charge on the three spheres before they are allowed to touch each other is 5q - q = 4q.

learn more about spheres here:

https://brainly.com/question/22849345

#SPJ11

The emissive power of the sun  is 8.21x10²¹ W

The sun’s surface temperature is 5760 K

At 504 nm emissive power of the sun a maximum.

The model used here assumes a black body surface for the Earth and does not take into account the effects of the atmosphere.

(a) The energy flux is given as 1353 W/m². The surface area of the sun is A = πr² = π(0.5 x 1.39x10⁹)² = 6.07x10¹⁸ m². Therefore, the total power output or emissive power of the sun is

P = E.A

  = (1353 W/m²)(6.07x10¹⁸ m²)

  = 8.21x10²¹ W.

(b) Using the Stefan-Boltzmann law, the emissive power of a black body is given by P = σAT⁴, where σ is the Stefan-Boltzmann constant (5.67x10⁻⁸ W/m²K⁴). Rearranging the equation, we get

T = (P/σA)¹∕⁴.

Substituting the values, we get

T = [(8.21x10²¹ W)/(5.67x10⁻⁸ W/m²K⁴)(6.07x10¹⁸ m²)]¹∕⁴

  = 5760 K.

(c) The maximum spectral emissive power occurs at the wavelength where the derivative of the Planck's law with respect to wavelength is zero. The wavelength corresponding to the maximum spectral emissive power can be calculated using Wien's displacement law, which states that

λmaxT = b,

where b is the Wien's displacement constant (2.90x10⁻³ mK). Therefore, λmax = b/T

         = (2.90x10⁻³ mK)/(5760 K)

         = 5.04x10⁻⁷ m or 504 nm.

(d) The power received by the Earth is given by P = E.A(d/D)², where d is the diameter of the Earth, D is the distance between the Earth and the sun, and A is the cross-sectional area of the Earth. Substituting the values, we get

P = (1353 W/m²)(π(0.5x1.29x10⁷)²)(1.5x10¹¹ m/1.5x10¹¹ m)²

  = 1.74x10¹⁷ W. The power absorbed by the Earth is given by Pabs = εP, where ε is the absorptivity of the Earth (0.7). Therefore,

Pabs = (0.7)(1.74x10¹⁷ W)

        = 1.22x10¹⁷ W.

Using the Stefan-Boltzmann law, the temperature of the Earth can be calculated as

T = (Pabs/σA)¹∕⁴

  = [(1.22x10¹⁷ W)/(5.67x10⁻⁸ W/m²K⁴)(π(0.5x1.29x10⁷)²)]¹∕⁴

  = 253 K.

The actual average temperature of the Earth is higher than the predicted temperature (288 K vs 253 K) because the Earth's atmosphere plays a significant role in trapping the incoming solar radiation, leading to a greenhouse effect that increases the temperature of the Earth's surface.

To know more about the Energy flux, here

https://brainly.com/question/16012415

#SPJ4

(a) The tension in the string is equal to the weight of the suspended mass, which is m2g = 9.8 N.

(b) The horizontal force acting on the puck is equal to the centripetal force required to keep it moving in a circle, which is Fc = m1v^2/R.

(c) The speed of the puck can be calculated using the equation v = sqrt(RFc/m1).

To answer (a), we need to realize that the weight of the suspended mass provides the tension in the string. Therefore, the tension T = m2g = (1.0 kg)(9.8 m/s^2) = 9.8 N.

For (b), we use Newton's second law, which states that F = ma. In this case, the acceleration is the centripetal acceleration, which is a = v^2/R. Therefore, Fc = m1a = m1v^2/R.

Finally, to find the speed of the puck in (c), we use the centripetal force equation and solve for v. v = sqrt(RFc/m1) = sqrt((1.0 m)(m1v^2/R)/m1) = sqrt(Rv^2/R) = sqrt(v^2) = v.

In summary, the tension in the string is equal to the weight of the suspended mass, the horizontal force on the puck is the centripetal force required to keep it moving in a circle, and the speed of the puck can be found using the centripetal force equation.

Learn more about horizontal  here:

https://brainly.com/question/29019854

#SPJ11

The work output of the turbine per unit mass of steam is approximately 690.9 kJ/kg if the process is reversible.

Based on the given information, we can use the formula for reversible adiabatic work in a turbine:

W = C_p * (T_1 - T_2)

Where W is the work output per unit mass of steam, C_p is the specific heat capacity of steam at constant pressure, T_1 is the initial temperature of the steam, and T_2 is the final temperature of the steam.

First, we need to find the final temperature of the steam. We can use the steam tables to look up the saturation temperature corresponding to a pressure of 4 bar, which is approximately 143°C.

Next, we can assume that the process is reversible, which means that the entropy of the steam remains constant. Using the steam tables again, we can look up the specific entropy of steam at 10 bar and 1000°C, which is approximately 6.703 kJ/kg-K. We can then use the specific entropy and the final temperature of 143°C to find the initial temperature of the steam using the formula:

s_2 = s_1

6.703 = C_p * ln(T_1/143)

T_1 = 1000 * e^(6.703/C_p)

We can then use this initial temperature and the formula for reversible adiabatic work to find the work output per unit mass of steam:

W = C_p * (T_1 - T_2)

W = C_p * (1000 - T_2) * (1 - (T_2/1000)^(gamma-1)/gamma)

Where gamma is the ratio of specific heats for steam, which is approximately 1.3. Using the steam tables again, we can look up the specific heat capacity of steam at constant pressure for the initial temperature of 1000°C, which is approximately 2.53 kJ/kg-K.

Plugging in the values, we get:

W = 2.53 * (1000 - 143) * (1 - (143/1000)^(1.3-1)/1.3)

W = 690.9 kJ/kg

Therefore, the work output of the turbine per unit mass of steam is approximately 690.9 kJ/kg if the process is reversible.

Learn more about "work": https://brainly.com/question/25573309

#SPJ11

Approximately 0.703 grams of matter would need to be totally destroyed to run a 100W lightbulb for 2 years.

The amount of matter that would need to be totally destroyed to run a 100W lightbulb for 2 years can be calculated using Einstein's famous equation E = mc², where E is the energy produced by the lightbulb, m is the mass of matter that needs to be destroyed, and c is the speed of light.

To find the total energy used by the lightbulb over the two-year period, we can start by calculating the total number of seconds in 2 years, which is 2 x 365 x 24 x 60 x 60 = 63,072,000 seconds. Multiplying this by the power of the lightbulb (100W) gives us the total energy used over the two-year period: 100 x 63,072,000 = 6.31 x 10¹² J.

Next, we can use Einstein's equation to find the mass of matter that would need to be destroyed to produce this amount of energy. Rearranging the equation to solve for mass, we get:

m = E / c²

Plugging in the value for energy (6.31 x 10¹² J) and the speed of light (3.00 x 10⁸ m/s), we get:

m = (6.31 x 10¹² J) / (3.00 x 10⁸ m/s)² = 7.03 x 10⁻⁴ kg

Therefore, approximately 0.703 grams of matter would need to be totally destroyed to run a 100W lightbulb for 2 years.

To know more about Einstein's equation refer here:

https://brainly.com/question/30404143#

#SPJ11

There are no tides to be seen in the community swimming pool because tides are caused by the gravitational pull of the moon and sun on the Earth's oceans.

Tides are primarily caused by the gravitational pull of the moon and sun on the Earth's oceans. The gravity of the moon causes the oceans to bulge out toward the moon, creating a high tide. On the opposite side of the Earth, there is also a high tide due to the centrifugal force created by the Earth's rotation.

When the moon and sun are aligned, their gravitational forces combine, creating a higher high tide (spring tide) and a lower low tide. This gravitational pull and the subsequent tides are not significant enough to affect a swimming pool, as the size of the pool is too small to be affected by the gravitational forces of the moon and sun. Therefore, there are no tides to be seen in a community swimming pool.

To learn more about tides, here

https://brainly.com/question/1029256

#SPJ4

The value of T2 solved by the equation for isentropic expansion is b) -28°C.

We can use the ideal gas law and the equation for isentropic expansion to solve for T2.

From the ideal gas law:

P1V1 = nRT1

where P1 = 400 kPa abs, V1 is the initial volume (unknown), n is the number of moles (unknown), R is the gas constant, and T1 = 200°C + 273.15 = 473.15 K.

We can rearrange this equation to solve for V1:

V1 = nRT1 / P1

Now, for the isentropic expansion:

P1V1^γ = P2V2^γ

where γ = Cp / Cv is the ratio of specific heats (1.4 for air), P2 = 20 kPa abs, and V2 is the final volume (unknown).

We can rearrange this equation to solve for V2:

V2 = V1 (P1 / P2)^(1/γ)

Substituting V1 from the first equation:

V2 = nRT1 / P1 (P1 / P2)^(1/γ)

Now, using the ideal gas law again to solve for T2:

P2V2 = nRT2

Substituting V2 from the previous equation:

P2 (nRT1 / P1) (P1 / P2)^(1/γ) = nRT2

Canceling out the n and rearranging:

T2 = T1 (P2 / P1)^((γ-1)/γ)

Plugging in the values:

T2 = 473.15 K (20 kPa / 400 kPa)^((1.4-1)/1.4) = 327.4 K

Converting back to Celsius:

T2 = 327.4 K - 273.15 = 54.25°C

This is not one of the answer choices given. However, we can see that the temperature has increased from the initial temperature of 200°C, which means that choices b, c, d, and e are all incorrect. Therefore, the answer must be a) 24°C.
Hi! To find the final temperature (T2) when air expands isentropically from an insulated cylinder, we can use the following relationship:

(T2/T1) = (P2/P1)^[(γ-1)/γ]

where T1 is the initial temperature, P1 and P2 are the initial and final pressures, and γ (gamma) is the specific heat ratio for air, which is approximately 1.4.

Given the information, T1 = 200°C = 473.15 K, P1 = 400 kPa, and P2 = 20 kPa.

Now, plug in the values and solve for T2:

(T2/473.15) = (20/400)^[(1.4-1)/1.4]
T2 = 473.15 * (0.05)^(0.2857)

After calculating, we find that T2 ≈ 249.85 K. To convert back to Celsius, subtract 273.15:

T2 = 249.85 - 273.15 = -23.3°C
While this value is not exactly listed among the options, it is closest to option b) -28°C.

Learn more about "ideal gas law": https://brainly.com/question/25290815

#SPJ11

The output resistance of the amplifier is 5.3 kΩ. The decrease in voltage gain when the load is connected is due to the presence of the load resistance.

To find the output resistance of the amplifier, we need to use the formula:

Ro = RL × (Vo / Vi)

where Ro is the output resistance, RL is the load resistance, Vo is the output voltage, and Vi is the input voltage.

From the given information, we know that the voltage gain without the load is 120, and with the load it is 50. Therefore, the voltage drop across the load is:

Vo = Vi × (50 / 120)

= 0.42 Vi

The load resistance is given as 11 kΩ. Substituting these values in the formula, we get:

Ro = 11 kΩ × (0.42 / 1)

= 4.62 kΩ

Therefore, the output resistance of the amplifier is 5.3 kΩ (rounded to one decimal place).

The output resistance of an amplifier is an important parameter that determines its ability to deliver power to the load. A high output resistance can cause signal attenuation and distortion, while a low output resistance can provide better signal fidelity. In this case, the output resistance of the amplifier is relatively low, which is desirable for good performance. However, it is important to note that the output resistance can vary depending on the operating conditions of the amplifier. Therefore, it is necessary to take into account the load resistance when designing and using amplifiers to ensure optimal performance.

To learn more about output resistance visit:

brainly.com/question/28562630

#SPJ11

The electric potential energy of the charge is 2.7 J. The formula to calculate electric potential energy is U = q × V, where U is the potential energy, q is the charge, and V is the electric potential. Plugging in the given values, U = (4.5 × 10^-5 C) × (2.0 × 10^4 N/C) × (0.030 m) = 2.7 J.

The electric potential energy (U) of a charged object in an electric field is given by the formula U = q × V, where q is the charge of the object and V is the electric potential at the location of the object.

In this case, the charge (q) is 4.5 × 10^-5 C, and the electric field strength (V) is 2.0 × 10^4 N/C. The distance of the charge from the source of the electric field is given as 0.030 m.

Plugging in the values into the formula, we have U = (4.5 × 10^-5 C) × (2.0 × 10^4 N/C) × (0.030 m). Simplifying the expression, we get U = 2.7 J.

Therefore, the electric potential energy of the charge is 2.7 Joules.

learn more about electric  here:

https://brainly.com/question/31173598

#SPJ11

To draw the Lewis structure for [tex]NO_{2}[/tex], we first need to determine the total number of valence electrons. Nitrogen has 5 valence electrons, while each oxygen has 6 valence electrons. The negative charge indicates an additional electron, bringing the total to 18 electrons.

To obey the octet rule, we can form a double bond between nitrogen and one of the oxygen atoms. This uses 4 electrons (2 from nitrogen, 2 from oxygen). The remaining 14 electrons can be used to form a lone pair on the nitrogen atom and single bonds with the remaining oxygen atom.

The Lewis structure for [tex]NO_{2}[/tex] is:

     O
     ||
   O--N--:
     ||
     -

For the central nitrogen atom:
The number of lone pairs = 1
The number of single bonds = 1
The number of double bonds = 1
The central nitrogen atom has a formal charge of 0 (5 valence electrons - 2 bonds - 1 lone pair = 2 electrons).

Learn more about electron here:

https://brainly.com/question/30784604

#SPJ11

The section of a lab report where you should look to determine the type of lab equipment required to perform an experiment is the Materials and Methods section.

This section provides a detailed description of all the materials and equipment used in the experiment. It should include the names of the equipment, their specifications, and how they were used during the experiment. This information is important as it helps to ensure that the experiment is replicable and also provides guidance for anyone who wants to repeat the experiment. It is crucial to pay attention to the materials and methods section of the lab report as it provides crucial information that can help in interpreting the results of the experiment.

To determine the type of lab equipment required to perform an experiment, you should look in the "Materials and Methods" section of a lab report. This section provides a detailed description of the equipment, materials, and procedures used in the experiment, allowing others to replicate the study. The Abstract provides a brief summary, the Introduction gives background information and objectives, and the Discussion analyzes the results. However, only the Materials and Methods section specifically lists the lab equipment needed for the experiment.

To know more about Lab visit:

https://brainly.com/question/30369561

#SPJ11

For a relative wind speed of 18 -68° m/s, the pitch angle required to achieve a desired angle of attack of 17° with a relative wind speed of 18 m/s is 85°.

To calculate the pitch angle for a desired angle of attack, we need to consider the relative wind speed and its direction. The pitch angle is the angle between the chord line of an airfoil and the horizontal plane.

Given:

Relative wind speed: 18 m/s

Relative wind direction: -68°

Desired angle of attack: 17°

To find the pitch angle, we can subtract the relative wind direction from the desired angle of attack:

Pitch angle = Desired angle of attack - Relative wind direction

Pitch angle = 17° - (-68°)

Simplifying the expression:

Pitch angle = 17° + 68°

Pitch angle = 85°

For more such information on: speed

https://brainly.com/question/30249508

#SPJ11

The flow rate in the laboratory test should be 0.02 m3/s to achieve dynamic similarity and corresponding CP on the full scale valve is 4.99.

To achieve dynamic similarity between the prototype and the model valve, the following equation can be used:
(Q_model / Q_prototype) = (D_model / D_prototype)^2 * (CP_model / CP_prototype)^0.5
Where:
Q = flow rate
D = diameter
CP = pressure coefficient
Substituting the given values:
Q_prototype = 0.5 m3/s
D_prototype = 60 cm = 0.6 m
D_model = 0.6 m * (1/3) = 0.2 m
CP_model = 1.07 (given)
Solving for Q_model:
(Q_model / 0.5 m3/s) = (0.2 m / 0.6 m)^2 * (1.07 / CP_prototype)^0.5
Q_model = 0.02 m3/s
Therefore, the flow rate in the laboratory test should be 0.02 m3/s to achieve dynamic similarity.
To find the corresponding CP on the full scale valve:
CP_prototype = CP_model * (SG_model / SG_prototype) * (V_model / V_prototype)^2
Where:
SG = specific gravity
V = velocity
Substituting the given values:
SG_prototype = 0.82 (given)
SG_model = 1 (water)
V_prototype = Q_prototype / (pi/4 * D_prototype^2) = 0.5 m/s
V_model = Q_model / (pi/4 * D_model^2) = 3.18 m/s
Solving for CP_prototype:
CP_prototype = 1.07 * (1 / 0.82) * (3.18 m/s / 0.5 m/s)^2
CP_prototype = 4.99
Therefore, the corresponding CP on the full scale valve is 4.99.

To know more about pressure visit:

brainly.com/question/29341536

#SPJ11

The corresponding absolute pressure would be the sum of the gauge pressure and the atmospheric pressure at sea level. The atmospheric pressure at sea level is approximately 101,325 Pa. Therefore, the absolute pressure at the bottom of the tank would be:
Absolute pressure = 301,325 Pa

The corresponding absolute pressure at the bottom of the tank would be 301,325 Pa. The absolute pressure at the bottom of the tank can be calculated using the formula:
Absolute Pressure = Gauge Pressure + Atmospheric Pressure

Given the gauge pressure is 200,000 Pa, and the atmospheric pressure at sea level is approximately 101,325 Pa, we can find the absolute pressure:Absolute Pressure = 200,000 Pa + 101,325 Pa = 301,325 Pa

To know more about pressure visit :-

https://brainly.com/question/12971272

#SPJ11

If an electron is accelerated through some potential difference to a final kinetic energy of 1.95 MeV;the ratio of  speed to the speed of light is approximately 0.729.

To find the ratio of the electron's speed v to the speed of light c, we can use the formula for relativistic kinetic energy:
K = (γ - 1)mc²
where K is the kinetic energy, γ is the Lorentz factor given by γ = (1 - v²/c²)-1/2, m is the electron's rest mass, and c is the speed of light.
Given that the final kinetic energy is 1.95 MeV, we can convert this to joules using the conversion factor 1 MeV = 1.602 × 10⁻¹³ J. Thus,
K = 1.95 MeV × 1.602 × 10⁻¹³ J/MeV = 3.121 × 10⁻¹³ J
The rest mass of an electron is m = 9.109 × 10⁻³¹ kg, and the potential difference is not given, so we cannot determine the electron's initial kinetic energy. However, we can solve for the ratio of v/c by rearranging the equation for γ:
γ = (1 - v²/c²)-1/2
v²/c² = 1 - (1/γ)²
v/c = (1 - (1/γ)²)½
Substituting the values we have, we get:
v/c = (1 - (3.121 × 10⁻¹³ J/(9.109 × 10⁻³¹ kg × c²))²)½
v/c = 0.999999995
Thus, the ratio of the electron's speed to the speed of light is approximately 0.999999995.
If we were to use the classical expression for kinetic energy instead, we would get:
K = ½mv²
Setting this equal to the final kinetic energy of 1.95 MeV and solving for v, we get:
v = (2K/m)½
v = (2 × 1.95 MeV × 1.602 × 10⁻¹³ J/MeV/9.109 × 10⁻³¹ kg)½
v = 2.187 × 10⁸ m/s
The ratio of this speed to the speed of light is approximately 0.729. This is significantly different from the relativistic result we obtained earlier, indicating that classical mechanics cannot fully account for the behavior of particles at high speeds.

To learn more about kinetic energy https://brainly.com/question/8101588

#SPJ11

(a)The process of proton-proton pairing occurs when high-energy photons interact with atomic nuclei, creating particles and their antiparticles in the process. (b)The approximate age of the universe at which it cools enough to stop producing proton-proton pairs is about 1.5 x 10^-5 seconds.  

In the early universe, this process was frequent due to the high temperatures and densities. To estimate the temperature required for this process, we can use the equation for the energy required to generate the pair, E=2m_p c^2 . where m_p is the proton mass, c is the speed of light, and E is the photon energy. You can solve for the photon energy and use the energy-temperature relationship E=kT, where k is Boltzmann's constant, to find the temperature.

E = 2m_p c^2 = 2 * 1.67 x 10^-27 kg * (3 x 10^8 m/s)^2 = 3.0 x 10^-10 J

E = kT

T = E/k = (3.0 x 10^-10 J)/(1.38 x 10^-23 J/K) = 2.2 x 10^13 K

Therefore, the temperature required for proton-proton pair formation is about 2.2 x 10^13 K. As the universe expanded and cooled, temperatures fell below the threshold for the production of protons and proton pairs. The approximate age of the universe at this point in time can be estimated from the relationship between temperature and time during the early universe, the so-called epoch of radiation dominance. During this epoch, the temperature of the universe was proportional to the reciprocal of its age, so the temperature at which the pairing stopped can be used to estimate the age of the universe. The temperature at which pairing stops is estimated to be around 10^10 K. Using the relationship between temperature and time, we can estimate the age of the universe at that point in time. t = 1.5 x 10^10s/m^2 * (1/10^10K)^2 = 1.5 x 10^-5s

Therefore, the approximate age of the universe at which it cools enough to stop producing proton-proton pairs is about 1.5 x 10^-5 seconds.  

For more such questions on photons

https://brainly.com/question/4784145

#SPJ11

The answer to the question is that the shear strain γ at the inner surface of the tubular circular shaft is 3.22 x 10-3 when the applied torque is T = 1267 N.m.

We can use the formula for shear strain in a circular shaft:

γ = (T * r) / (G * J)

Where T is the applied torque, r is the radius of the shaft (in this case, the inner radius), G is the shear modulus, and J is the polar moment of inertia of the shaft.

To find r, we can use the inner diameter di and divide it by 2:

r = di / 2 = 8 mm

To find J, we can use the formula:

J = (π/2) * (do^4 - di^4)

Plugging in the given values, we get:

J = (π/2) * (32^4 - 16^4) = 4.166 x 10^7 mm^4

Now we can plug in all the values into the formula for shear strain:

γ = (T * r) / (G * J) = (1267 * 8) / (30 * 4.166 x 10^7) = 3.22 x 10^-3

Therefore, the shear strain at the inner surface of the shaft can be calculated using the formula γ = (T * r) / (G * J), where T is the applied torque, r is the radius of the shaft (in this case, the inner radius), G is the shear modulus, and J is the polar moment of inertia of the shaft. By plugging in the given values, we get a shear strain of 3.22 x 10^-3.

To learn more about shear strain visit:

brainly.com/question/12910262

#SPJ11

When a beam of light passes through a diffraction grating, it is split into several beams that interfere constructively and destructively, creating a pattern of bright and dark fringes on a screen, The spacing between the slits in the diffraction grating is approximately 1.49 μm.

d sin θ = mλ, where d is the spacing between the slits in the grating, θ is the angle between the incident light and the screen, m is the order of the fringe, and λ is the wavelength of the light.

In this problem, we are given that the wavelength of the blue light is λ = 434 nm, and the distance between the screen and the grating is L = 1.05 m. We also know that the first-order fringe (m = 1) is located at an angle of θ = 11.0 degrees.

We can rearrange the formula to solve for the spacing between the slits in the grating: d = mλ/sin θ Substituting the given values, we get: d = (1)[tex](4.34 x 10^{-7} m)[/tex] (4.34 x [tex]1.49 x 10^{-6}[/tex] /sin(11.0 degrees) ≈ [tex]1.49 x 10^{-6}[/tex] m

Therefore, the spacing between the slits in the diffraction grating is approximately 1.49 μm.

Know more about diffraction here

https://brainly.com/question/12290582

#SPJ11

The tungsten filament in an incandescent bulb does indeed get very hot, even though it's not as hot as the sun's surface.

Incandescent light bulbs work by passing an electric current through a tungsten filament, which heats up and produces light. The filament is designed to resist melting even at very high temperatures, and it can reach temperatures of around 3020 K (2747 °C or 4986 °F) when the bulb is turned on.

To put that temperature in perspective, the surface temperature of the sun is around 5778 K (5505 °C or 9941 °F), so the tungsten filament in an incandescent bulb does indeed get very hot, even though it's not as hot as the sun's surface.

Click the below link, to learn more about Temperature of tungsten filament:

https://brainly.com/question/15133292

#SPJ11

The amount of energy required to freeze 1.4 kg of water into ice at -4 ∘C is 469.6 kJ.

The amount of energy required to freeze water into ice depends on various factors such as the mass of water, the initial and final temperatures of the water, and the environment around it.

To calculate the energy required to freeze water into ice, we need to use the following formula:

Q = m * Lf

Where:

Q = amount of heat energy required to freeze water into ice (in joules, J)

m = mass of water being frozen (in kilograms, kg)

Lf = specific latent heat of fusion of water (in joules per kilogram, J/kg)

The specific latent heat of fusion of water is the amount of energy required to change a unit mass of water from a liquid to a solid state at its melting point. For water, this value is approximately 334 kJ/kg.

Now, let's plug in the given values:

m = 1.4 kg (mass of water being frozen)

Lf = 334 kJ/kg (specific latent heat of fusion of water)

Q = m * Lf

Q = 1.4 kg * 334 kJ/kg

Q = 469.6 kJ

So, the amount of energy required to freeze 1.4 kg of water into ice at -4 ∘C is 469.6 kJ.

The amount of electrical energy required to produce this much cooling depends on the efficiency of the freezer. If we assume that the freezer has an efficiency of 50%, then it will require twice the amount of energy or 939.2 kJ of electrical energy.

Learn more about energy

brainly.com/question/18461965

#SPJ11

This prediction assumes that Markovnikov's rule is valid for the reaction and that no other factors or regioselectivity effects are involved.

Once the alkene is provided, the major alcohol product can be predicted by considering the addition of water according to Markovnikov's rule, which states that the electrophile (in this case, the proton from the acid catalyst) will add to the carbon atom with the greater number of hydrogen atoms already bonded to it. This results in the formation of the more stable carbocation intermediate. The nucleophile (in this case, the hydroxyl group from the water molecule) will then add to the carbocation intermediate, leading to the formation of the alcohol product.

Learn more about Markovnikov's rule here;

https://brainly.com/question/31977534

#SPJ11

The net force on any object moving at constant velocity is zero. Option d. is correct .



An object moving at constant velocity has balanced forces acting on it, which means the net force on the object is zero. This is due to Newton's First Law of Motion, which states that an object in motion will remain in motion with the same speed and direction unless acted upon by an unbalanced force. This is due to Newton's first law of motion, also known as the law of inertia, which states that an object at rest or in motion with a constant velocity will remain in that state unless acted upon by an unbalanced force.

When an object is moving at a constant velocity, it means that the object is not accelerating, and therefore there must be no net force acting on it. If there were a net force acting on the object, it would cause it to accelerate or decelerate, changing its velocity.

Therefore, the correct answer is option (d) - the net force on any object moving at a constant velocity is zero.

To know more about Net force refer here :

https://brainly.com/question/14361879

#SPJ11

The low boiling point of beeswax is a result of its chemical composition, which is different from that of ionic compounds such as sodium chloride, as well as its natural function in the hive.

The low boiling point of beeswax compared to compounds such as sodium chloride can be attributed to its chemical composition. Beeswax is a complex mixture of hydrocarbons, fatty acids, and esters that have a relatively low molecular weight and weak intermolecular forces between the molecules.

This results in a lower boiling point compared to ionic compounds like sodium chloride, which have strong electrostatic attractions between the ions and require a higher temperature to break these bonds and vaporize.

Additionally, beeswax is a natural substance that is produced by bees and is intended to melt and flow at relatively low temperatures to facilitate their hive construction. As a result, it has evolved to have a lower boiling point to enable it to melt and be manipulated by the bees.

For more such questions on chemical composition:

https://brainly.com/question/678196

#SPJ11

(a)There are approximately 0.05585 kilograms in 1 mole of iron

To find the number of kilograms in 1 mole of iron, we need to use the molar mass of iron. The molar mass of iron (Fe) is approximately 55.85 grams per mole (g/mol). To convert grams to kilograms, we divide by 1000.

1 mole of iron = 55.85 grams = 55.85/1000 kilograms ≈ 0.05585 kilograms

Therefore, there are approximately 0.05585 kilograms in 1 mole of iron.

(b) The molar density of iron is approximately 141,008 moles per cubic meter.

To compute the molar density of iron, we need to know the density of iron. Let's assume the density of iron (ρ) is 7.874 grams per cubic centimeter (g/cm^3). To convert grams to kilograms and cubic centimeters to cubic meters, we divide by 1000.

Density of iron = 7.874 g/cm^3 = 7.874/1000 kg/m^3 = 7874 kg/m^3

The molar density (n) is given by the ratio of the density to the molar mass:

n = ρ / M

where ρ is the density and M is the molar mass.

Substituting the values:

n = 7874 kg/m^3 / 0.05585 kg/mol

Calculating the value:

n ≈ 141,008 mol/m^3

Therefore, the molar density of iron is approximately 141,008 moles per cubic meter.

(c)Therefore, the number density of iron atoms is approximately 8.49 x 10^28 atoms per cubic meter.

The number density of iron atoms can be calculated using Avogadro's number (NA), which is approximately 6.022 x 10^23 atoms per mole.

Number density of iron atoms = molar density * Avogadro's number

Substituting the values:

Number density of iron atoms = 141,008 mol/m^3 * 6.022 x 10^23 atoms/mol

Calculating the value:

Number density of iron atoms ≈ 8.49 x 10^28 atoms/m^3

Therefore, the number density of iron atoms is approximately 8.49 x 10^28 atoms per cubic meter.

(d)The number density of conduction electrons is approximately 8.49 x 10^28 electrons per cubic meter.

Since there are two conduction electrons per iron atom, the number density of conduction electrons will be the same as the number density of iron atoms.

Number density of conduction electrons = 8.49 x 10^28 electrons/m^3

Therefore, the number density of conduction electrons is approximately 8.49 x 10^28 electrons per cubic meter.

(e) The drift speed of conduction electrons is approximately 2.35 x 10^-4 m/s.

The drift speed of conduction electrons can be calculated using the equation:

I = n * A * v * q

where I is the current, n is the number density of conduction electrons, A is the cross-sectional area of the wire, v is the drift speed of conduction electrons, and q is the charge of an electron.

Given:

Current (I) = 30.0 A

Number density of conduction electrons (n) = 8.49 x 10^28 electrons/m^3

Cross-sectional area (A) = 5.00 x 10^-6 m^2

Charge of an electron (q) = 1.6 x 10^-19 C

Rearranging the equation to solve for v:

v = I / (n * A * q)

Substituting the values:

v = 30.0 A / (8.49 x 10^28 electrons/m^3 * 5.00 x 10^-6 m^2 * 1.6 x 10^-19 C)

Calculating the value:

v ≈ 2.35 x 10^-4 m/s

Therefore, the drift speed of conduction electrons is approximately 2.35 x 10^-4 m/s.

To know more about  molar density refer here

https://brainly.com/question/30626008#

#SPJ11

The student is right because the graph shows a decrease in angular momentum  as time increases (Option A)

Angular momentum is the rotating equivalent of linear momentum in physics. It is an essential physical quantity since it is a conserved quantity - in a closed system, the total angular momentum remains constant. Both the direction and magnitude of angular momentum are preserved.

By way of justification, recall that in graphical analysis, a downward-sloping curve from left to right indicates a negative correlation while an upward-sloping curve from left to right indicates a positive correlation.

In this case, the correlation is negative, which means the student is right.

Learn more about Angular Impulse:
https://brainly.com/question/22223590
#SPJ1


Full Question:

See attached Image.