Answer:
A video camera with onboard storage(whether is a tape or digital memory) will record sound
Environmental engineers monitor the progress of improvement programs by inspecting industrial and municipal facilities for regulation compliance.
True or False?
true
the answer to this question is true
____________ is the organization that oversees environmental compliance.
Answer:
Environmental Protection Agency (EPA)
Explanation:
Pollution can be defined as the physical degradation or contamination of the environment through an emission of harmful, poisonous and toxic chemical substances.
Environmental Protection Agency (EPA) is the organization that oversees environmental compliance.
In the United States of America, the agency which was established by US Congress and saddled with the responsibility of overseeing all aspects of pollution, environmental clean up, pesticide use, contamination, and hazardous waste spills is the Environmental Protection Agency (EPA). Also, EPA research solutions, policy development, and enforcement of regulations through the resource Conservation and Recovery Act.
Hence, the Environmental Protection Agency (EPA) is the governmental agency set up to ensure that various industries, factories and people comply with laws and regulations concerning the environment.
Answer:
EPA
Explanation:
In a hydroelectric power plant, 65 m3/s of water flows from an elevation of 90 m to a turbine, where electric poweris generated. The overall efficiency of the turbine–generator is84 percent. Disregarding frictional losses in piping, estimate the electric power output of this plant.
Answer:
Electric power output of this plant is [tex]48.192\times 10^{6}\,W[/tex].
Explanation:
From First Law of Thermodynamics we understand that hydroelectric power plant transforms mechanical energy from fluid into electric energy. The power output of this plant ([tex]\dot W[/tex]), measured in watts, is determined by this expression, which is derived from definition of mechanical energy and energy efficiency:
[tex]\dot W = \eta \cdot \rho\cdot g\cdot H \cdot \dot V[/tex] (1)
Where:
[tex]\eta[/tex] - Energy efficiency, no unit.
[tex]\rho[/tex] - Density, measured in kilograms per cubic meter.
[tex]g[/tex] - Gravitational acceleration, measured in meters per square second.
[tex]H[/tex] - Fluid column, measured in meters.
[tex]\dot V[/tex] - Volume flow, measured in cubic meters per second.
If we know that [tex]\eta = 0.84[/tex], [tex]\rho = 1000\,\frac{kg}{m^{3}}[/tex], [tex]g = 9.807\,\frac{m}{s^{2}}[/tex], [tex]H = 90\,m[/tex] and [tex]\dot V = 65\,\frac{m^{3}}{s}[/tex], then the estimated electric power output of this plant is:
[tex]\dot W = (0.84)\cdot \left(1000\,\frac{kg}{m^{2}} \right)\cdot \left(9.807\,\frac{m}{s^{2}} \right)\cdot \left(90\,m\right)\cdot \left(65\,\frac{m^{3}}{s} \right)[/tex]
[tex]\dot W = 48.192\times 10^{6}\,W[/tex]
Electric power output of this plant is [tex]48.192\times 10^{6}\,W[/tex].
In a vehicle with front disc brakes, the vehicle pulls to the left when braking. What causes this?
A. Seized left brake caliper piston
B. Collapsed left brake line hose
what is in gorilla glue
Answer:
glue
Explanation:
What is the minimum recommended safe distance from an X-ray source?
Which of the following is an example of a social need?
Answer:
A
Explanation:
A 75-hp (shaft output) motor that has an efficiency of 91.0% is worn out and is replaced by a high-efficiency 75-hp motor that has an efficiency of 95.4%. Determine the reduction in the heat gain of the room due to higher efficiency under full-load conditions.
Answer:
the reduction in the heat gain is 2.8358 kW
Explanation:
Given that;
Shaft outpower of a motor [tex]W_{shaft}[/tex] = 75 hp = ( 75 × 746 ) = 55950 W
Efficiency of motor [tex]n_{motor}[/tex] = 91.0% = 0.91
High Efficiency of the motor [tex]n_{high-eff}[/tex] = 95.4% = 0.954
now, we know that, efficiency of motor is defined as; [tex]n_{motor}[/tex] = [tex]W_{shaft}[/tex] / [tex]W_{elec}[/tex]
where [tex]W_{elec}[/tex] is the electric input given to the motor
so
[tex]W_{elec}[/tex] = [tex]W_{shaft}[/tex] / [tex]n_{motor}[/tex]
we substitute
[tex]W_{elec}[/tex] = 55950 W / 0.91
= 61483.5 W
= 61.4835 kW
now, the electric input given to the motor due to increased efficiency will be;
[tex]W_{elec-incresed}[/tex] = [tex]W_{shaft}[/tex] / [tex]n_{high-effic}[/tex]
we substitute
[tex]W_{elec-incresed}[/tex] = 55950 W / 0.954
= 58647.79 W
= 58.6477 kW
so the reduction of the heat gain of the room due to higher efficiency will be;
Q = [tex]W_{elec}[/tex] - [tex]W_{elec-incresed}[/tex]
we substitute
Q = 61.4835 kW - 58.6477 kW
Q = 2.8358 kW
Therefore, the reduction in the heat gain is 2.8358 kW
What area would an industrial materials recycler avoid obtaining construction and demolition materials from?
landfills
construction sites
condemned buildings
mines and timber fields
Design a double angle section for the lower chord of the roof truss depicted below. Allow for a double row of bolt holes in the larger leg. The smaller leg of the double angle used for the lower chord does not have bolts. Finally, assume no fewer than 3 bolts per line in the direction of the load. Use ASD.
ok zcxnlegdjbfxbkqlu
jksdczruiorth
Find the resultant of the force system on the body OABC as shown .find the points where the resultant will cut the X and Y axis?
Explanation:
the resultant force =
[tex] \sqrt{} {x}^{2} + {y}^{2} [/tex]
A resultant force is the single force and corresponding torque that are produced when adding vectors to a system of forces and torques acting on a rigid body.
What are the resultant of the force system on the body?R = A + B. Instance 2 To create the resulting vector, two vectors facing the opposite direction are subtracted from one another. Here, the vector B is pointing in the opposite direction of the vector A, and the resulting vector is called R.
A force system is a group of forces that interact at specific locations (may also include couples). Therefore, the collection of forces shown on any free body diagram is a force system. A group of forces is simply referred to as a force system.
Therefore, When an item is under the influence of two or more forces, the combined force can be calculated by adding up the separate forces.
Learn more about force system here:
https://brainly.com/question/7494637
#SPJ2
You have discovered an element that is a poor conductor of electricity, has a low melting point, and is a gas at room temperature. How would you classify this element?
Answer:
All nonmetallic elements are generally poor conductors of heat and electricity. There are only 17 nonmetallic elements, while more than 75 percent of the known elements are either pure metals or metalloids, which are better conductors of heat and electricity to a varying degree.
Explanation:
Select three of the prerequisites for becoming a civil engineer.
bachelor’s degree in civil engineering
physics courses
communications courses
professional certification
internship with a Professional Engineer
Thanks!
Answer:
A bachelor's degree
Physics course
professional certification
Answer:
A bachelor's degree
Physics course
professional certification
Explanation:
The doorbell of a home requires 10 volts to operate. A transformer is used to connect a 120 v primary circuit within the home to the doorbell. The transformer in the doorbell has 500 turns on the primary coil and supplies the doorbell with 900 mA of current.
Required:
a. Determine whether the transformer features a step-up or step-down design.
b. Calculate the number of turns on the secondary coil.
c. Calculate the current that is drawn from the 120-V household circuit to operate the doorbell in mA.
Answer:
See explanation
Explanation:
a) The transformer must be a step down transformer because the secondary voltage which it supplies is less than the primary voltage.
b) From;
Ns/Np = Es/Ep
Where;
Ns= number of turns in secondary coil
Np= number of turns in primary coil
Es= voltage in secondary coil
Ep= voltage in primary coil
NsEp = EsNp
Ns = EsNp/Ep
Ns = 10 * 500/120
Ns = 42 turns
c) From;
Es/Ep = Ip/Is
EsIs = EpIp
Ip = EsIs/Ep
Ip = 10 * 900 * 10^-3/120
Ip = 75 mA
Life cycle assessments are used by various industries to identify and evaluate the total energy impacts of their products and services.
True or False?
Answer:
True.
Explanation:
A product life cycle can be defined as the stages or phases that a particular product passes through, from the period it was introduced into the market to the period when it is eventually removed from the market.
Generally, there are four (4) stages in the product-life cycle;
1. Introduction.
2. Growth.
3. Maturity.
4. Decline.
Life cycle assessment (LCA) also known as life cycle analysis can be defined as an environmental management technique which is typically used by industries to assess, monitor and analyze the impact of the various stages of the life-cycle of their products, systems, processes or activities and services on the environment i.e the cradle to grave impacts.
Generally, life cycle assessments requires a thorough evaluation of the raw materials and energy that are being used in the manufacturing process of a product or service, as well as determining the various emissions into the environment respectively.
For example, in the manufacturing process of a product, life cycle assessment evaluates the impact of the product from raw material extraction (cradle) to production (finished product), distribution, use, and the disposal of the product (grave).
Hence, life cycle assessments are used by various industries to identify and evaluate the total energy impacts of their products and services.
an employee is having trouble with a current project and needs help.
Answer:
What ! you are an Engineer and I am a High school why are You in my feed..!!
How many horsepower in 337 cc engine
Answer:
11.0 HP
Explanation:
integer awardPoints
integer userTickets
// Program will be tested with 6, 7, 8, and 3.
userTickets = Get next input
// Your solution goes here
Put "awardPoints: " to output
Put awardPoints to output
si marialyn yung crush ko kaso di nya ako crush
may crush siyang iba
Which of the following careers have subject-specific skills related to mathematics and data?
Select all that apply.
a. education
b. engineering
c. good service
d. technology
Answer:
Explanation:
Do you mean food service? It's kind of iffy as an answer. It might be handy to understand the chemistry of foods and the technology of refrigeration. That makes food services hard to classify.
Education: no. You can avoid the math and data skills. You don't need them in education. I knew many teachers that had no idea what a computer did.
technology: definitely. There aren't many technologies that make data processing and mathematics unnecessary.
engineering: definitely.
Answer
Engineering
Technology
maybe food services.
The first two for sure.
Spray guns atomize liquid true or false?
Answer:
True
Explanation:
Spray gun plays an one of the most important roles in spray finishing as it directs air to atomize the fluid, gives the particles sufficient velocity to reach the product surface, and shapes the pattern/texture. Hope this helps you as much as intended.
Answer: True
Explanation:
The air cap on the spray gun plays an important role in spray finishing as it directs air to atomize the fluid, gives the particles sufficient velocity to reach the product surface, and shapes the pattern.
Why is using the proper joining technique important? What could go wrong if the wrong joining technique is used?
Answer:
Explanation:
Using the proper technique is incredibly important because it prevents the materials being joined from breaking and/or causing an accident. If the wrong joining technique is used the materials may not hold in place and come apart easily instead. Also, some joining techniques are not meant for some materials and may instead cause the material to become weak and brittle causing it to break apart almost immediately.
Joining describes a technique which is used to merge two or more independent materials together. The use of wrong joining technique or procedure could result in accident.
In engineering construction, the need to join materials together is always needed for so many reasons. Hence, depending on the materials to be merged, welding, soldering and some other techniques may be employed.
Therefore, wrong or inadequate joining may cause these parts to split or breakup, hence causing severe casualty.
Learn more : https://brainly.com/question/19114739
inlet and outlet vane angle of turbine
B/ Evaluate e^(πi/2)
You get a result immediately from Euler's formula:
e ^(i π/2) = cos(π/2) + i sin(π/2) = 0 + i * 1 = i
Select the four areas in which environmental engineers assist manufacturers with making decisions.
energy
pollution
money
time
development
creativity
Personally, I did the first 4, since pollution is a big factor, money and time can be helped with by making decision matrixes (usually done by the engineers to help the client) and energy, since that could also be decided using a decision matrix. Thank you for your help!
Answer:
In my opinion, Energy, Time, Money and Development
Answer:
Pollution, time, money, and energy.
Explanation:
1. The hull of the space shuttle consists of ceramic tiles bonded to an aluminum skin. Discuss the design requirements of the shuttle hull that led to the use of this combination of materials. What problems in producing the hull might the designers and manufacturers have faced
Answer:
Follows are the solution to the given question:
Explanation:
In the environment of the piles of earth, its spacecraft faces extreme temperatures:
Therefore, to prevent satellite build sustainability, a temperature control system must be used.
Its skin must be rather permeable in physiological terms.
Its shuttle's surface should have adhered to both the material well.
Whether it gets broken, it ought to be easy to repair.
All tile mostly on the cutter is composed of silicon dioxide particles, that are bonded and create a tile of very low density.
Its heat transfer is so small that even a person may hold a burning hot side on one side of the tile.
Skin that uses a rubber resin to ensure that perhaps the powers may not release the cutting that heat-treated will then the internal body.
The design requirements that led to the combination of ceramic tiles and aluminium materials for the hull of shuttle space are; discussed below.
The space shuttle experiences extreme temperatures during re-entry into the earths atmosphere. Thus, as a result, a thermal protection system must be provided to help prevent damage of the shuttle structure.
Therefore, the skin must be made up of material that has an exceptionally low thermal conductivity and also the material must be able to be firmly attached to the skin and also be able to be easily repaired in case of any damage.
Secondly, the tiles used on the space shuttle will have to be composed of silica fibers that are bonded together to generate a ceramic of low density. The thermal conductivity of the ceramic would have to be low such that if you touch one end while the other is very hot, you will not feel the hotness.
Now, the tiles will be attached to the shuttle skin with the aid of a rubbery polymer which ensures that the forces don't break the tile loose which will then expose the underlying skin to high temperatures.
Read more about some physical properties of ceramic at; https://brainly.com/question/14215109
Water is pumped from a lake to a large storage tank that is 15 m above at a rate of 70 L/s while consuming 15.4 kW of electric power. Disregarding any frictional losses in the pipes.
a. Starting from the conservation of energyequation in the units of Watts, simplify the equation for the case where you want to determinethe mechanical energy added to the water by the pump. Explain why you can eliminate each termyou would not need. The final form of the equation should be in terms of parameters given in a typical problem.
b. Calculate the overall efficiency of the pump-motor unit.
Answer:
Water is pumped from a lake to a storage tank of 15 m above at a rate of 70 L/s while consuming 15.4 kW of electric power. Disregarding any frictional losses in the pipes and any changes in kinetic energy, determine (a) the overall efficiency of the pump-motor unit and (b) the pressure difference between the inlet and the exit of the pump.Explanation:
The preparation of a formal SEMP is usually a required portion of a contractor’s proposal for a competitive system development program. Since at this time the system design is still in a conceptual state, explain where you would get the information to address the elements of a typical SEMP as listed in this chapter.
Answer:
hello you question lacks the listed options hence i will give you a general answer
answer :
Information can be gotten from : living document and product engineering and RMA engineering
Explanation:
SEMP ( system engineering management plan ) is a plan laid out to enable communication between the project management team in a project and the engineering team working on the project .
The information to be used to address the elements of a typical SEMP at the conceptual stage can gotten from the living document and it will continue to be improved on as the project frame work continues to expand gradually also Information to address the elements of a typical SEMP can be gotten from product engineering and RMA engineering because an SEMP is based on several engineering process
A 100-mm-long strip of metal is stretched in two steps, first to 200 mm and then to 400 mm. Show that the total true strain is the sum of the true strains in each step; in other words, the true strains are additive. Show that, in the case of engineering strains, the strains cannot be added to obtain the total strain.
Answer:
Kindly check the explanation section.
Explanation:
Determine the strain in units in both steps.
For step one, strain = [ final length - Initial length]/ initial length = 200 - 100/ 100 = 1 unit.
For step two, the strain = final length - Initial length]/ initial length = 400 - 200/ 200 = 1 unit.
Total strain for the two steps = 1 unit + 1 unit = 2 units.
Estimation using single step is given below;
400 - 100/ 400 = 0.75.
It can be shown from above that the Engineering strength is Addictive.
The next thing to do is to determine the true strength. This is how it can be proved that the strength is Addictive or not.
b1 + b2 = (200 - 100/100) + (400-200/ 200)
b1 + b2 = 1 + 1 = 2.
b(total) = 400 - 100/100 = v2 - v1/v1.