To find the dimensions of the least expensive chest, we need to minimize the cost of materials while satisfying the given capacity constraint.
Let's denote the length, width, and height of the chest as L, W, and H, respectively.
The volume constraint gives us the equation L * W * H = 2.
The cost of the cedar material for the sides of the box (excluding the back and base) is given by C_cedar = 8 * (2LH + 2WH).
The cost of the pine material for the back and base is given by C_pine = 4 * (LW + WH).
To minimize the cost, we can use the volume constraint to express one of the variables in terms of the other two. For example, we can solve the volume equation for L: L = 2 / (WH).
Substituting this expression for L in the cost equations, we get:
C_cedar = 8 * (2 * (2 / (WH)) * H + 2 * W * H) = 32 / W + 32W
C_pine = 4 * ((2 / (WH)) * W + W * H) = 8 / H + 4W
The total cost of the chest is given by C_total = C_cedar + C_pine:
C_total = (32 / W + 32W) + (8 / H + 4W) = 32 / W + 8 / H + 36W
To minimize the cost, we can take the partial derivatives of C_total with respect to W and H and set them equal to zero:
dC_total / dW = -32 / W^2 + 36 = 0
dC_total / dH = -8 / H^2 = 0
Solving these equations, we find W = sqrt(32/3) and H = infinity.
Since H cannot be infinite, we need to consider the constraint of the box being physically feasible. Let's set H = L = sqrt(32/3), and solve for W using the volume constraint:
sqrt(32/3) * sqrt(32/3) * W = 2
W = 3 / (4 * sqrt(3))
Therefore, the dimensions of the least expensive chest are approximately:
Length (L) = Width (W) = sqrt(32/3) ≈ 3.08 m
Height (H) = sqrt(32/3) ≈ 3.08 m
To learn more about constraint : brainly.com/question/17156848
#SPJ11
The charactersitic equation of a 2nd order, constant coefficient differential equation is p(x)=x^2, and y_p=sin(x) is a particular solution. Which is the general solution?
A. y asin(bx)+c, where a, b, and c are constants
B. y-ax+bx^2+sin(x), where a and b are constants
C. y=a+bx+csin(x), where a, b, and care constants
D. y=a+bx+sin(x), where a and b are constants
Second-order, constant coefficient differential equation, the characteristic equation determines the form of the general solution . The general solution for the given differential equation is option D: y = a + bx + sin(x), where a and b are constants.
For a second-order, constant coefficient differential equation, the characteristic equation determines the form of the general solution. In this case, the characteristic equation is p(x) = x^2. The solutions to this equation are the roots of the equation, which are x = 0.
To find the general solution, we consider the particular solution y_p = sin(x) and the complementary solution y_c, which is the solution to the homogeneous equation p(x)y'' + q(x)y' + r(x)y = 0. Since the roots of the characteristic equation are x = 0, the complementary solution can be expressed as y_c = a + bx, where a and b are constants.
The general solution is the sum of the particular solution and the complementary solution: y = y_p + y_c. Substituting the values, we get y = sin(x) + (a + bx) = a + bx + sin(x), which matches option D.
Therefore, the general solution for the given differential equation is y = a + bx + sin(x), where a and b are constants.
Learn more about homogeneous equation here:
https://brainly.com/question/30624850
#SPJ11
Graph the function and find the intervals where the function is increasing, decreasing and constant. (12 pts) f (x)= { 3, if x< -3 and -x of -3
The intervals where the function is increasing, decreasing, or constant is given below: Decreasing: x > -3Increasing: x < -3 Constant: At x = -3
Given function is, f (x)=\begin{cases}3 & \text{ if } x<-3\\-x+3 & \text{ if } x\geq -3\end{cases}
Let us graph the function as shown below: graph{(y=3),(-x+3)[x>=-3]}
Clearly, the given function has a break in the graph at x = -3.
Hence, we have to check the intervals to determine where the function is increasing, decreasing, or constant.
f (x)=\begin{cases}3 & \text{ if } x<-3\\-x+3 & \text{ if } x\geq -3\end{cases}
\frac{df}{dx}=\begin{cases}0 & \text{ if } x<-3\\-1 & \text{ if } x>-3\end{cases}
The derivative of the function is defined as the slope of the function.
Thus, the function is decreasing where the derivative is negative.
Hence, the intervals where the function is increasing, decreasing, or constant are given below: Decreasing: x > -3Increasing: x < -3 Constant: At x = -3
Know more about the function here:
https://brainly.com/question/11624077
#SPJ11
Part 2. Applying Math Concepts in a Presentation
a. Insert your own design. Draw using triangle concepts learned in this unit.
b. Indicate the measures (dimensions) of each side.
c. Show how triangle congruence played a role in your design.
d. The answer to the below questions should be part of your presentation
i. How much weight can the bridge carry? (people, vehicle and rain)
ii. How long will the bridge be and what materials should be used?
iii. How many years/months/weeks/days will it take to build?
iv. How many workers do you suggest being hired to build it?
e. Justify using the information you have which of the two bridge designs best fit the conditions needed by the investors.
(a) The trusses are to provide maximum support and distribute the weight evenly.(b) Distance between truss segments. (c) congruence allows for the uniform distribution of weight and stability. (d) The optimal number is based on the project's requirements and desired completion timeframe. (e) It will help in making an informed decision that aligns with the investors' needs and goals.
a. Design: In my design, I have created a truss bridge using triangle concepts. The bridge consists of multiple triangular trusses connected together to form a strong and stable structure. The trusses are arranged in an alternating pattern to provide maximum support and distribute the weight evenly.
b. Measures (Dimensions):
Side 1: Length of each truss segment
Side 2: Height of each truss segment
Side 3: Distance between truss segments
c. Triangle Congruence: Triangle congruence plays a crucial role in the design of the bridge. Each triangular truss is congruent to one another, ensuring that they have the same shape and size. This congruence allows for the uniform distribution of weight and stability throughout the bridge structure.
d. Answers to Questions:
i. To determine the weight the bridge can carry, a structural analysis needs to be conducted considering factors such as material strength, bridge design, and safety regulations. An engineer would need to perform calculations based on these factors to provide an accurate weight capacity.
ii. The length of the bridge will depend on the span required to cross the intended gap or distance. The materials used for construction will depend on various factors, including the weight capacity required, budget, and environmental conditions. Common materials for bridges include steel, concrete, and composite materials.
iii. The construction time for the bridge will depend on several factors, such as the size and complexity of the bridge, the availability of resources, and the number of workers involved. A construction timeline can be estimated by considering these factors and creating a detailed project plan.
iv. The number of workers required to build the bridge will depend on the project's scale, timeline, and available resources. A construction manager can determine the optimal number of workers needed based on the project's requirements and the desired completion timeframe.
e. Justification: To determine which bridge design best fits the conditions needed by the investors, we need more information about the specific requirements, budget constraints, and other factors such as environmental considerations and aesthetics.
Additionally, the weight capacity, length, construction time, and workforce requirements would need to be evaluated for each design option. Conducting a thorough analysis and comparing the designs based on these factors will help in making an informed decision that aligns with the investors' needs and goals.
To know more about Triangle congruence:
https://brainly.com/question/29200217
#SPJ4
Show that for all polynomials f(x) with a degree of n, f(x) is
O(xn).
Show that n! is O(n log n)
Simplifying this further gives n! ≥ n^{n/2} / 2^{n/2}. Therefore, n! is O(n log n) as a result.
1. Show that for all polynomials f(x) with a degree of n, f(x) is O(xn).
If f(x) is a polynomial of degree n, it will have the following form: f(x) = a_nx^n + a_{n-1}x^{n-1} + ... + a_0 where an ≠ 0.
The first step is to take the absolute value of this equation, resulting in |f(x)| = |a_nx^n + a_{n-1}x^{n-1} + ... + a_0|
Since we know that all terms are positive in the summation, we can write: |f(x)| ≤ |a_nx^n| + |a_{n-1}x^{n-1}| + ... + |a_0|
Furthermore, each of the terms is smaller than anxn when the argument is greater than or equal to 1, which means we can further simplify: |f(x)| ≤ (|a_n| + |a_{n-1}| + ... + |a_0|)x^n
Let c = |an| + |an-1| + ... + |a0| for brevity.
We may now write:|f(x)| ≤ cx^n
This means that f(x) is O(xn) for all polynomials of degree n.2. Show that n! is O(n log n).n! is written as: n! = n(n-1)(n-2)...3*2*1
Taking the logarithm of this yields: log(n!) = log(n) + log(n-1) + ... + log(2) + log(1)
Applying Jensen’s Inequality with the function f(x) = log(x) yields:
log(n!) ≥ log(n(n-1)...(n/2)) + log((n/2)-1)...log(2) + log(1) where n is an even number.
The left side is equivalent to log(n!) and the right side is equal to log((n/2)n/2-1...2·1). Simplifying this we get:
log(n!) ≥ n/2 log(n/2)
Since log(x) is an increasing function, we can raise e to both sides of this inequality and obtain:$$n! ≥ e^{n/2log(n/2)}
Know more about polynomials here:
https://brainly.com/question/4142886
#SPJ11
If sec (3 + x) O 373 2 3π 3 2π 3 500 4π 3 = 2, what does x equal?
Therefore x is equal to π/3
Given, sec(3+x) O = 373/2.
Let's write the ratios of trigonometric functions of the angles in the unit circle. (where O is the angle)As we know,In a unit circle,
The value of sec(O) = 1/cos(O)
Formula used: sec(O) = 1/cos(O)
Let's simplify the given equation,
sec(3+x) O = 373/21/cos(3+x)
= 373/2cos(3+x)
= 2/373 ------------(1)
Let's evaluate the value of cos(π/6) using the unit circle.
cos(π/6) = √3/2
We know, π/6 + π/3 = π/2 ----(2) [Using the formula, sin (A+B) = sinA cosB + cosA sinB]Substituting the value of x from equation (2) in equation (1),cos(3+π/3)
= 2/373cos(10π/6)
= 2/373cos(5π/3)
= 2/373√3/2
= 2/373 (multiplying by 2 on both sides)1/2√3 = 373
x equals π/3
To know more about sec visit:
https://brainly.com/question/24783711
#SPJ11
Suppose A € Mn,n (R) and A³ = A. Show that the the only possible eigenvalues of A are λ = 0, X = 1, and λ = −1.
Given, A € Mn,n (R) and A³ = A.
To show: The only possible eigenvalues of A are λ = 0, λ = 1 and λ = -1.
Proof: Let λ be the eigenvalue of A, and x be the corresponding eigenvector, i.e., Ax = λxAlso, given A³ = A. Therefore, A²x = A(Ax) = A(λx) = λ(Ax) = λ²x...Equation 1A³x = A(A²x) = A(λ²x) = λ(A²x) = λ(λ²x) = λ³x...Equation 2From Equations 1 and 2,A³x = λ²x = λ³xAnd x cannot be the zero vector. So, λ² = λ³ = λ ⇒ λ = 0, λ = 1, or λ = -1Hence, the only possible eigenvalues of A are λ = 0, λ = 1, or λ = -1.
Learn more about eigen values:
https://brainly.com/question/15586347
#SPJ11
The formula A = 15.7 e 0. 0.0412t models the population of a US state, A, in millions, t years after 2000.
a. What was the population of the state in 2000? b. When will the population of the state reach 18.7 million? a. In 2000, the population of the state was million. b. The population of the state will reach 18.7 million in the year
(Round down to the nearest year.)
a. To find the population of the state in 2000, substitute 0 for t in the formula. That is, [tex]A = 15.7e0.0412(0) = 15.7[/tex] million (to one decimal place). Therefore, the population of the state in 2000 was 15.7 million people.
b. We are given that the population of the state will reach 18.7 million. Let's substitute 18.7 for A and solve for [tex]t:18.7 = 15.7e0.0412t[/tex] Divide both sides by 15.7 to isolate the exponential term.[tex]e0.0412t = 18.7/15.7[/tex]
Now we take the natural logarithm of both sides:
[tex]ln(e0.0412t) \\= ln(18.7/15.7)0.0412t \\=ln(18.7/15.7)[/tex]
Divide both sides by [tex]0.0412:t = ln(18.7/15.7)/0.0412[/tex]
Using a calculator, we find:t ≈ 8.56 (rounded to two decimal places)Therefore, the population of the state will reach 18.7 million in the year 2000 + 8.56 ≈ 2009 (rounded down to the nearest year).
Thus, the answer is: a) In 2000, the population of the state was 15.7 million. b) The population of the state will reach 18.7 million in the year 2009.
To know more about natural logarithm visit -
brainly.com/question/29154694
#SPJ11
The mean time to failure for an electrical component is given by;
M = ∫3 (1-0.37 t)¹.² dt
Determine the mean time to failure.
The mean time to failure, based on the given integral ≈ 2.180.
To determine the mean time to failure, we need to evaluate the integral:
M = ∫3 (1 - 0.37t)^1.2 dt
Let's calculate the integral:
M = ∫3 (1 - 0.37t)^1.2 dt
Using the power rule for integration, we can rewrite the integrand:
M = ∫3 (1 - 0.37t)^(6/5) dt
Now, let's integrate using the power rule:
M = [(-5/6)(1 - 0.37t)^(6/5+1)] / (6/5+1) + C
Simplifying the expression:
M = [-5/6(1 - 0.37t)^(11/5)] / (11/5) + C
M = (-5/6)(1 - 0.37t)^(11/5) * (5/11) + C
Now, we need to evaluate the integral from 0 to 3:
M = [(-5/6)(1 - 0.37*3)^(11/5) * (5/11)] - [(-5/6)(1 - 0.37*0)^(11/5) * (5/11)]
Simplifying further:
M = [(-5/6)(1 - 1.11)^(11/5) * (5/11)] - [(-5/6)(1 - 0)^(11/5) * (5/11)]
M = [(-5/6)(-0.11)^(11/5) * (5/11)] - [(-5/6)(1)^(11/5) * (5/11)]
M = [(-5/6)(-0.11)^(11/5) * (5/11)] - [(-5/6)(1) * (5/11)]
M = [-5/6(-0.11)^(11/5)] - [-5/6(5/11)]
M = [-5/6(-0.11)^(11/5)] + [25/66]
Finally, we can calculate the mean time to failure by evaluating the expression:
M ≈ 2.180
To know more about integral refer here:
#SPJ11
3. Bacteria in a bottle are quadrupling every minute. If the number of bacteria in the bottle at noon is 1, how many bacteria are in the bottle at 12:10 pm? 1 TI 201 opulation is
The given scenario describes a situation of bacteria quadrupling every minute. Since the starting number of bacteria is given, we can solve the given question by applying the concept of exponential growth.
Exponential growth is a type of growth pattern where the number of individuals increases at an increasingly faster rate over time. This growth pattern is generally seen in populations of organisms that have unlimited resources for survival and reproduction. In the given scenario, the bacteria in the bottle is growing exponentially at a rate of quadrupling every minute. Hence, the growth of bacteria follows the exponential equation
P = P0 × 4t, where P is the number of bacteria at a given time t, and P0 is the initial number of bacteria.
Therefore, using the given formula, we can find the number of bacteria in the bottle at 12:10 pm as follows:
t = 10 minutes (12:10 pm - 12:00 pm)
P0 = 1 (initial population)
P = P0 × 4t
= 1 × 4¹⁰
= 1048576Therefore, the number of bacteria in the bottle at 12:10 pm is 1048576.
learn more about Exponential growth
https://brainly.com/question/13223520
#SPJ11
Given the aligned set of sequences below, with the first base of the start codon corresponding to the fourth position in the sequence (1-0 corresponds to the first base of the start codon): CCCATGTCG CTCATGTTT Aligned Sequence CGCGTGACG CCGATGGTG Determine the information content per base for each position, Roquence() for / = -3 to +5, where the first base in the sequence is/= -3. Answers should be in decimal notation with two decimal places. R(-3)-R(1)-R(2) R(-2)R(3) RC-1)R(0)-R(5) R(4)
The information content per base for each position in the aligned sequences is as follows:
R(-3) = 0.00
R(-2) = 0.00
R(-1) = 0.32
R(0) = 0.00
R(1) = 0.00
R(2) = 0.00
R(3) = 0.00
R(4) = 0.32
R(5) = 0.00
In the given aligned sequences, the first base of the start codon corresponds to the fourth position in the sequence. The information content per base is a measure of the amount of information carried by each base at a specific position.
To calculate it, we consider the frequency of each nucleotide at that position and apply the formula: R(i) = log2(N) - Σpi*log2(pi), where N is the number of different nucleotides and pi is the frequency of each nucleotide at position i.
For positions -3, -2, 0, 1, 2, 3, and 5, there is only one nucleotide present, so the information content is 0.00 as there is no uncertainty. At position -1 and 4, there are two different nucleotides present, and the frequency of each nucleotide is 0.5. Therefore, the information content for these positions is 0.32.
The information content per base for each position in the aligned sequences. The positions with multiple nucleotides have an information content of 0.32, indicating some level of uncertainty, while the positions with a single nucleotide have an information content of 0.00, indicating no uncertainty.
Learn more about Aligned
brainly.com/question/13423071
#SPJ11
Diagonalize the following matrix. 7 -5 0 10 0 31 -7 0 02 0 0 00 2 Select the correct choice below and, if necessary, fill in the answer box to complete your choice. 2000 0200 O A. For P = D= 0030 0007
The given matrix can be diagonalized by the following transformation:
P = [2 0 0]
[0 1 0]
[0 0 1]
D = [7 0 0]
[0 7 0]
[0 0 7]
The diagonal matrix D contains the eigenvalues of the matrix, which are all equal to 7. The matrix P consists of the corresponding eigenvectors.
To diagonalize the given matrix, we need to find the eigenvalues and eigenvectors of the matrix.
The given matrix is:
A =
[7 -5 0]
[10 0 31]
[-7 0 2]
To find the eigenvalues, we solve the characteristic equation |A - λI| = 0, where I is the identity matrix.
Substituting the values into the characteristic equation:
|7-λ -5 0|
|10 0-λ 31|
|-7 0 2-λ| = 0
Expanding the determinant:
[tex](7-λ)((-λ)(2-λ) - (0) - (0)) + 5((10)(2-λ) - (0) - (-7)(31)) + 0 - 0 - 0 = 0\\(7-λ)(λ^2 - 2λ) + 5(20 - 2λ + 217) = 0\\(7-λ)(λ^2 - 2λ) + 5(237 - 2λ) = 0\\(7-λ)(λ^2 - 2λ + 237) = 0\\[/tex]
Setting each factor equal to zero:
λ = 7 (with multiplicity 1)
[tex]λ^2 - 2λ + 237 = 0[/tex]
Using the quadratic formula to solve for the remaining eigenvalues, we find that the quadratic equation does not have real solutions. Therefore, the only eigenvalue is λ = 7.
To find the eigenvectors corresponding to λ = 7, we solve the equation (A - 7I)v = 0, where v is a non-zero vector.
Substituting the values into the equation:
[7 -5 0]
[10 0 31]
[-7 0 2] - 7[1 0 0]v = 0
Simplifying the equation:
[0 -5 0]
[10 -7 31]
[-7 0 -5]v = 0
Row-reducing the augmented matrix:
[0 -5 0 | 0]
[10 -7 31 | 0]
[-7 0 -5 | 0]
Performing row operations:
[0 -5 0 | 0]
[10 -7 31 | 0]
[0 -35 -25 | 0]
Dividing the second row by -7:
[0 -5 0 | 0]
[0 1 -31/7 | 0]
[0 -35 -25 | 0]
Adding 5 times the second row to the first row:
[0 0 -155/7 | 0]
[0 1 -31/7 | 0]
[0 -35 -25 | 0]
Dividing the first row by -155/7:
[0 0 1 | 0]
[0 1 -31/7 | 0]
[0 -35 -25 | 0]
Adding 35 times the third row to the second row:
[0 0 1 | 0]
[0 1 0 | 0]
[0 -35 0 | 0]
Adding 35 times the third row to the first row:
[0 0 0 | 0]
[0 1 0 | 0]
[0 -35 0 | 0]
From the row-reduced form, we can see that the second row is a free variable, which means the eigenvector corresponding to λ = 7 is [0 1 0] or any non-zero multiple of it.
To summarize:
Eigenvalue λ = 7 with multiplicity 1.
Eigenvector corresponding to λ = 7: [0 1 0] or any non-zero multiple of it.
Therefore, the correct choice for diagonalizing the matrix is:
P = [2 0 0]
[0 1 0]
[0 0 1]
D = [7 0 0]
[0 7 0]
[0 0 7]
To know more about matrix,
https://brainly.com/question/31776074
#SPJ11
Draw a triangle and then a similar triangle, with scale factor 34, using
the following methods. Plan ahead so that the triangles will fit on the
same page.
a. with the ruler method, using your ruler and a center of your choice
b. with a ruler and protractor
To draw a similar triangle with a scale factor of 34, you can use the ruler method or the ruler and protractor method.
To draw a similar triangle using the ruler method, follow these steps:
1. Start by drawing the first triangle using a ruler, ensuring it fits within the page.
2. Choose a center point within the first triangle. This will be the center for the second triangle as well.
3. Measure the distance from the center to each vertex of the first triangle using the ruler.
4. Multiply each of these distances by the scale factor of 34.
5. From the center point, mark the new distances obtained in the previous step to create the vertices of the second triangle.
6. Connect the marked points to form the second triangle.
Using the ruler and protractor method, follow these steps:
1. Draw the first triangle using a ruler, making sure it fits on the page.
2. Choose a center point within the first triangle, which will also be the center for the second triangle.
3. Measure the angles of the first triangle using a protractor.
4. Multiply each angle measurement by the scale factor of 34.
5. Use the protractor to mark the new angle measurements from the center point, creating the vertices of the second triangle.
6. Connect the marked points to form the second triangle.
Learn more about Triangles
brainly.com/question/2773823
#SPJ11
find parametric equations for the line through the point (0, 1, 1) that is perpendicular to the line x = 1 t, y = 1 − t, z = 3t and intersects this line. (use the parameter t.)
The equations that represent the line that passes through the point (0, 1, 1), is perpendicular to the line x = t, y = 1 − t, z = 3t, and intersects that line.
To find the direction vector of this line, we can take the coefficients of t from the parametric equations. The direction vector will be a vector that points in the same direction as the line. So, we have:
Direction vector of the given line = (1, -1, 3)
Now, let's find the direction vector of the line that is perpendicular to the given line. Since the two lines are perpendicular, their direction vectors will be orthogonal (i.e., their dot product will be zero).
Let the direction vector of the perpendicular line be (a, b, c). We want this direction vector to be orthogonal to the direction vector of the given line, so we have the following equation:
(1, -1, 3) · (a, b, c) = 0
The dot product of two vectors is given by the sum of the products of their corresponding components. So, we can write:
1a + (-1)b + 3c = 0
This equation represents a constraint on the direction vector of the perpendicular line. We can choose any values for a, b, and c that satisfy this equation.
Let's choose a = 1, b = 1, and c = 1 as an example. Substituting these values into the equation, we get:
1(1) + (-1)(1) + 3(1) = 0
1 - 1 + 3 = 0
3 = 0
As 3 is not equal to 0, these values do not satisfy the equation. So, let's try a different set of values.
Let's choose a = 3, b = 1, and c = 1. Substituting these values into the equation, we get:
1(3) + (-1)(1) + 3(1) = 0
3 - 1 + 3 = 0
5 = 0
As 5 is not equal to 0, these values also do not satisfy the equation. It seems that we cannot find integer values for a, b, and c that satisfy the equation.
However, we can find non-integer values that satisfy the equation. Let's choose a = 1, b = 1, and c = -2/3. Substituting these values into the equation, we get:
1(1) + (-1)(1) + 3(-2/3) = 0
1 - 1 - 2 = 0
-2 = 0
As -2 is equal to 0, these values satisfy the equation. Therefore, we can choose a = 1, b = 1, and c = -2/3 as the direction vector of the perpendicular line.
Now, we can write the parametric equations for the line that passes through the point (0, 1, 1) and is perpendicular to the given line. Let's call the parameter for these new equations u:
x = 0 + 1u
y = 1 + 1u
z = 1 - (2/3)u
To know more about equation here
https://brainly.com/question/21835898
#SPJ4
{(1,2,1),(2,1 |(2,1,5), (1, –4,7) } is linear dependent subset of R', (i) Prove that (ii) Determine whether the vector (1,2,6) is a linear combination of the vector
Answer: There are non-zero solutions to the equation
k₁ (1, 2, 1) + k₂ (2, 1, 5) + k₃ (1, –4, 7) = (1, 2, 6).
Hence, the vector (1, 2, 6) is a linear combination of the given set.
Step-by-step explanation:
The given set is linearly dependent.
Let's check the proof for that.
Since both the given vectors have 3 components, let's solve them as 3x3 linear system as shown below:
2x + y = 2y + x + 5z
4x - 8y = -x + 4z
This system can be expressed in terms of matrix equation as shown below:
A . X = 0
where A is a 3x3 matrix consisting of coefficients, X is the column vector with components (x, y, z) and 0 is the zero column vector of the same dimension as X.
The matrix A = 2 -1 -5 4 -8 4 -1 0 0 is the coefficient matrix.
The given vectors {(1, 2, 1), (2, 1, 5), (1, –4, 7)} form a linearly dependent subset of R³ if and only if there are scalars k₁, k₂ and k₃, not all zero, such that:
k₁ (1, 2, 1) + k₂ (2, 1, 5) + k₃ (1, –4, 7) = (0, 0, 0)
Thus, we need to find such scalars, k₁, k₂, and k₃, not all zero such that the above equation holds.
Let's write these vectors in terms of a column matrix to solve it:
k₁ + 2k₂ + k₃ = 0
2k₁ + k₂ - 4k₃ = 0
k₁ + 5k₂ + 7k₃ = 0
One solution to this system is
k₁ = -1, k₂ = 1, k₃ = 1.
Therefore, not all coefficients are zero.
So, the given vectors form a linearly dependent set.
Now let's check if the given vector (1, 2, 6) is a linear combination of the given set or not.
Let's solve the system of linear equations:
k₁ + 2k₂ + k₃ = 1
2k₁ + k₂ - 4k₃ = 2
k₁ + 5k₂ + 7k₃ = 6
Solving this system of linear equations, we get
k₁ = 1, k₂ = 0, k₃ = 1.
To know more about matrix visit:
https://brainly.com/question/29132693
#SPJ11
Let X be a discrete random variable. Evaluate the expectation E (x+₁) for the X+1 following models: (a) (3 points) X follows a Poisson distribution Po(A) where >> 0. (b) (5 points) X follows a binomial distribution B(n, p) where n E N and p € (0, 1).
For the Poisson distribution, E(X+1) equals A + 1, while for the binomial distribution, E(X+1) equals np + 1.
(a) In the case where X follows a Poisson distribution Po(A), where A > 0, we want to evaluate the expectation E(X+1).
The Poisson distribution is commonly used to model the number of events occurring within a fixed interval of time or space, given the average rate of occurrence (A). The probability mass function of the Poisson distribution is given by P(X=k) = (e^(-A) * A^k) / k, where k is a non-negative integer.
To evaluate E(X+1) for the Poisson distribution, we need to find the expected value of X+1. Using the properties of expectation, we can express it as E(X) + E(1).
The expected value of X from the Poisson distribution is given by E(X) = A, as it corresponds to the average rate of occurrence. The expected value of a constant (in this case, 1) is simply the constant itself.
Therefore, E(X+1) = E(X) + E(1) = A + 1.
(b) In the case where X follows a binomial distribution B(n, p), where n is a positive integer and p is a probability value between 0 and 1, we want to evaluate the expectation E(X+1).
The binomial distribution is commonly used to model the number of successes (X) in a fixed number of independent Bernoulli trials, where each trial has a probability of success (p).
To evaluate E(X+1) for the binomial distribution, we need to find the expected value of X+1. Again, using the properties of expectation, we can express it as E(X) + E(1).
The expected value of X from the binomial distribution is given by E(X) = np, where n is the number of trials and p is the probability of success in each trial. The expected value of a constant (in this case, 1) is simply the constant itself.
Therefore, E(X+1) = E(X) + E(1) = np + 1.
To learn more about distribution - brainly.com/question/30971436
#SPJ11
A company wants to determine if its employees have any preference among 5 different health plans which it offers to them. A sample of 200 employees provided the data below. Calculate the chi-square test statistic to test the claim that the probabilities show no preference. Use α= 0.01. Round to two decimal places. Plan:1 2 3 4 5 Employees : 65 32 18 30 55 A. 45.91 B. 48.91 C. 37.45 D. 55.63
A chi-square test is a statistical test are associated with one another. the chi-square test statistic to test the claim that the probabilities show no preference is 27.88. Option A (45.91) is incorrect. Option B (48.91) is incorrect. Option C (37.45) is incorrect. Option D (55.63) is incorrect.
Expected Frequencies:Plan 1:[tex](65+32+18+30+55)/5 = 40Plan 2: (65+32+18+30+55)/5 = 40Plan 3: (65+32+18+30+55)/5 = 40Plan 4: (65+32+18+30+55)/5 = 40Plan 5: (65+32+18+30+55)/5 = 40Total: 200[/tex] The chi-square test statistic can be calculated using the following formula:χ2 = ∑ (Observed frequency - Expected frequency)2 / Expected frequency[tex]χ2 = [(65-40)2/40] + [(32-40)2/40] + [(18-40)2/40] + [(30-40)2/40] + [(55-40)2/40]χ2 = 27.88[/tex]
The degrees of freedom (df) for the test is (5-1) = 4.Using α = 0.01 with 4 degrees of freedom in a chi-square distribution table, we find the critical value to be 13.28.Since the calculated chi-square test statistic (27.88) is greater than the critical value (13.28), we can reject the null hypothesis. This means that the probabilities do not show no preference.
To know more about frequency visit:
https://brainly.com/question/29739263
#SPJ11
Find the domain of the following vector-valued function. r(t) = √t+4i+√t-9j ... Select the correct choice below and fill in any answer box(es) to complete your choice.
OA, ít:t>= }
OB. {t: t≤ }
OC. {t: ≤t≤ }
OD. {t: t≤ or t>= }
The domain of the vector-valued function [tex]r(t) = \sqrt{t+4i} + \sqrt{t-9j}[/tex] is {t: t ≥ 9}.
In the given functiovector-valued n, we have [tex]\sqrt{t+4i} + \sqrt{t-9j}[/tex]. To determine the domain, we need to identify the values of t for which the function is defined.
In this case, both components of the function involve square roots. To ensure real-valued vectors, the expressions inside the square roots must be non-negative. Hence, we set both t + 4 ≥ 0 and t - 9 ≥ 0.
For the first inequality, t + 4 ≥ 0, we subtract 4 from both sides to obtain t ≥ -4.
For the second inequality, t - 9 ≥ 0, we add 9 to both sides to get t ≥ 9.
Combining the results, we find that the domain of the function is {t: t ≥ 9}. This means that the function is defined for all values of t greater than or equal to 9.
Therefore, the correct choice is OA: {t: t ≥ 9}.
To learn more about vector valued function visit:
brainly.com/question/31399483
#SPJ11
Write in terms of sine and cosine and simplify the expression. (cos A - 2 sin A cos A )/ (cos² A - sin² A + sin A - 1) ______
the expression in terms of sine and cosine and simplified is [(cos A - sin A)(1 + 2 sin A)] / [(sin A - 1)² - cos² A].
The expression to be written in terms of sine and cosine is:(cos A - 2 sin A cos A )/ (cos² A - sin² A + sin A - 1
We know that cos 2A = cos² A - sin² A and
sin 2A = 2sin A cos A
Therefore, cos 2A + 1 = cos² A - sin² A + 1 and cos 2A - 1
= cos² A - sin² A
We can simplify the denominator as follows:cos² A - sin² A + sin A - 1
= cos² A - (1 - sin² A) + sin A - 2
= cos² A - cos 2A + sin A - 2
= -[cos 2A - cos² A - sin A + 2]
= -[cos 2A - (1 - sin A)²]
Now, we can rewrite the given expression as
:cos A - 2 sin A cos A / [-cos 2A + (1 - sin A)²]
= [(cos A - sin A)(1 + 2 sin A)] / [(sin A - 1)² - cos² A]
Therefore, the expression in terms of sine and cosine and simplified is [(cos A - sin A)(1 + 2 sin A)] / [(sin A - 1)² - cos² A].
Cos is a trigonometric function that gives the ratio of the length of the adjacent side to the hypotenuse side of a right-angled triangle, while Trigonometry is the study of triangles, especially right triangles, and the relations between their sides and angles.
https://brainly.com/question/13729598
#SPJ11
if x=0 & y=3x+3 what is y
Step-by-step explanation:
Put ' 0 ' where 'x' is and solve:
y = 3(0) + 3 = 3
Let A, B, and C be independent events with P(4)-0.3, P(B)-0.2, and P(C)-0.1. Find P(A and B and C). P(A and B and C) =
To find the probability of the intersection of three independent events A, B, and C, we multiply their individual probabilities together. Therefore, P(A and B and C) = P(A) * P(B) * P(C).
Given that P(A) = 0.3, P(B) = 0.2, and P(C) = 0.1, we can substitute these values into the equation: P(A and B and C) = 0.3 * 0.2 * 0.1. Performing the multiplication: P(A and B and C) = 0.006.
Hence, the probability of all three events A, B, and C occurring simultaneously is 0.006, or 0.6%. This indicates that the occurrence of A, B, and C together is relatively rare, as the probability is quite small.
To learn more about probability click here: brainly.com/question/31828911
#SPJ11
Use the definition of the derivative, i.e. the difference quotient, to algebraically determine f'(x), for f(x)=√x. (5 points)
The derivative of f(x) = √x can be found using the definition of the derivative, which is the difference quotient. The derivative of f(x) = √x is f'(x) = 1 / (2√x).
To find f'(x), we start with the definition of the difference quotient:
f'(x) = lim (h → 0) [f(x + h) - f(x)] / h
Substituting f(x) = √x into the difference quotient, we have:
f'(x) = lim (h → 0) [√(x + h) - √x] / h
To simplify the expression, we use the conjugate of the numerator:
f'(x) = lim (h → 0) [(√(x + h) - √x) * (√(x + h) + √x)] / (h * (√(x + h) + √x))
Expanding the numerator and canceling out the common terms, we get:
f'(x) = lim (h → 0) [h] / (h * (√(x + h) + √x))
Canceling out the h terms, we obtain:
f'(x) = lim (h → 0) 1 / (√(x + h) + √x)
Finally, taking the limit as h approaches zero, we have:
f'(x) = 1 / (2√x)
Therefore, the derivative of f(x) = √x is f'(x) = 1 / (2√x).
To learn more about derivatives click here: brainly.com/question/29144258
#SPJ11
Convert the following function given in Cartesian Coordinates into Polar form. x = √√25-y² 25 Or= cos²0-sin²0 25 Or= cos² 0+ sin² 0 Or=5 5 Or: cos sin e -
The Cartesian function x = [tex]\sqrt\sqrt25-y^2[/tex] can be expressed in polar form as r = 5.
What is the polar form of the function x = [tex]\sqrt\sqrt25-y^2[/tex]?In Cartesian coordinates, the given function x = [tex]\sqrt\sqrt25-y^2[/tex] represents a circle centered at the origin with a radius of 5. By rearranging the equation, we can see that x is equal to the square root of the quantity 25 minus y squared.
This implies that x can take on any non-negative value up to 5 as y varies from -5 to 5. In polar coordinates, we express the location of a point using its distance from the origin (r) and its angle (θ) with respect to the positive x-axis.
Converting the equation into polar form, we replace x with r and obtain r = 5, which indicates that the distance from the origin is a constant value of 5, regardless of the angle.
Learn more about Polar coordinates and Cartesian coordinates.
brainly.com/question/15215968
#SPJ11
Find the arc length given: y = x^3/6 + 1/2x on the interval [1/2,2]
To find the arc length of the curve y = (1/6)x^3 + (1/2)x on the interval [1/2, 2], we can use the arc length formula:
L = ∫[a,b] √(1 + [tex](dy/dx)^2[/tex]) dx,
where dy/dx represents the derivative of y with respect to x.
First, let's find the derivative of y:
dy/dx = (1/2)[tex]x^{2}[/tex] + (1/2).
Next, we can square the derivative:
[tex](dy/dx)^2 = ((1/2)x^2 + (1/2))^2 = (1/4)x^4 + (1/2)x^2 + (1/4).[/tex]
Now, we substitute the derivative into the arc length formula and integrate:
L = ∫[1/2,2] √(1 + (1/4)[tex]x^{4}[/tex] + (1/2)[tex]x^{2}[/tex] + (1/4)) dx.
Using numerical integration methods such as the trapezoidal rule or Simpson's rule, we can estimate the arc length. Using a numerical integration method, the approximate value of the arc length is found to be L ≈ 2.112. Therefore, the arc length of the curve y = (1/6)[tex]x^{3}[/tex]+ (1/2)x on the interval [1/2, 2] is approximately 2.112 units.
Learn more about trapezoidal rule here:
https://brainly.com/question/30401353
#SPJ11
In a league of nine football teams, each team plays
every other team in the league exactly once. How many league games
will take place?
In a league of nine football teams where each team plays every other team exactly once, a total of 36 league games will take place.
In a league with n teams, each team plays against every other team exactly once.
To determine the number of games, we need to calculate the number of unique combinations of two teams that can be formed from the total number of teams.
In this case, we have nine teams in the league.
To find the number of unique combinations, we can use the formula for combinations, which is given by nC2 = n! / (2!(n-2)!), where n! denotes the factorial of n.
The formula for the factorial of a non-negative integer n, denoted as n!, is:
n! = n × (n - 1) × (n - 2) × ... × 3 × 2 × 1
In other words, the factorial of a number n is the product of all positive integers from 1 to n.
Plugging in the value of n = 9 into the formula, we get:
9C2 = 9! / (2!(9-2)!)
= (9 × 8 × 7!) / (2 * 7!)
= (9 × 8) / 2
= 72 / 2
= 36
Therefore, a total of 36 league games will take place in a league of nine football teams, where each team plays every other team exactly once.
Learn more about combinations here:
https://brainly.com/question/28065038
#SPJ11
1) Charlie goes to the grocery store to buy to buy Goldfish (Baked Snack Crackers). He has a choice between a 28 gram package for $1.19 and a 12 once package for $14.99 Which deal is better? (cheaper
Charlie goes to the grocery store to buy to buy Goldfish (Baked Snack Crackers). He has a choice between a 28 gram package for $1.19 and a 12 once package for $14.99, therefore the 28-gram package is a better deal. It is cheaper than the 12-ounce package and costs less per gram.
To solve this problem, we need to compare the prices per gram of the two packages, because they are in different units. We start by dividing the price of the 28-gram package by 28 to find the price per gram: 1.19 ÷ 28 ≈ 0.0425 dollars per gram.
Next, we do the same thing with the 12-ounce package. There are 12 ounces in 340 grams (because 1 ounce = 28 grams), so we divide the price of the package by 340 to get the price per gram:14.99 ÷ 340 ≈ 0.0441 dollars per gram.So, the 28-gram package is cheaper per gram than the 12-ounce package. Therefore, the 28-gram package is a better deal.
learn more about 12-ounce package
https://brainly.com/question/25427192
#SPJ11
Assume 2000 female student at university are normally distributed with mean 165 cm and standand deviation 5,34 cm. If 70 samples consisting 22 students each are obtained, what would be the expected mean and standand deviation of the resulting sampling distribution of means if sampling was done 1) with replacement 2) without replacement?
The expected mean of the resulting sampling distribution of means, when sampling is done with replacement, would remain the same as the population mean of 165 cm. However, the expected standard deviation would decrease to approximately 1.19 cm.
1) When sampling is done with replacement, each sample of 22 students is selected independently, allowing for the possibility of the same student being selected multiple times. Since the population mean is 165 cm, the expected mean of the resulting sampling distribution of means would also be 165 cm. The standard deviation of the sampling distribution of means is given by the formula: standard deviation = population standard deviation / sqrt(sample size). In this case, the population standard deviation is 5.34 cm, and the sample size is 22. Therefore, the expected standard deviation would be approximately 5.34 / sqrt(22) ≈ 1.19 cm.
2) When sampling is done without replacement, each student can only be included in one sample. However, since the population mean remains the same, the expected mean of the resulting sampling distribution of means would still be 165 cm. The standard deviation of the sampling distribution of means, in this case, is given by the formula: standard deviation = population standard deviation / sqrt(sample size * (population size - sample size) / (population size - 1)). Here, the sample size is 22 and the population size is 2000. Plugging in these values, the expected standard deviation would be approximately 5.34 / sqrt(22 * (2000 - 22) / (2000 - 1)) ≈ 0.37 cm.
To learn more about mean click here: brainly.com/question/31101410
#SPJ11
A new test with five possible scores is being evaluated in a study. The results of the study are as follows: Score Normal Abnormal 0 60 1 1 20 9 2 10 15 3 7 25 4 50 Totals 100 100 For a cutoff point of 0, calculate the Sensitivity (1 Point)
a. 60%
b. 90%
c. 99%
d. 80%
To calculate the sensitivity for a cutoff point of 0, we need to determine the proportion of true positives (abnormal cases correctly identified) out of all the abnormal cases. option (a) 60%
The given data shows that out of 100 abnormal cases, 60 were correctly identified with a score of 0. Sensitivity is calculated by dividing the true positives by the total number of abnormal cases and multiplying by 100. Therefore, the sensitivity is (60/100) * 100 = 60%. Hence, option (a) 60% is the correct answer.
Sensitivity, also known as the true positive rate, measures the proportion of true positives correctly identified by a test. In this case, the cutoff point is 0. Looking at the given data, we see that out of the 100 abnormal cases, 60 were correctly identified with a score of 0.
The sensitivity is calculated by dividing the number of true positives (abnormal cases correctly identified) by the total number of abnormal cases and multiplying by 100. In this scenario, the sensitivity is (60/100) * 100 = 60%.
Therefore, the correct answer is option (a) 60%, indicating that 60% of the abnormal cases were correctly identified by the test at the cutoff point of 0.
to learn more about sensitivity click here; brainly.com/question/14857334
#SPJ11
Let G be a finite group and p a prime.
(i)If P is an element of Syl_p(G) and H is a subgroup of G containing P,then prove that P is an element of Syl_p(H).
(ii)If H is a subgroup of G and Q is an element of Syl_p(H),then prove that gQg^-1 is an element of Syl_p(gHg^-1).
Let G be a finite group and p a prime. To prove that P is an element of Syl p(H) and to prove that P is an element of Syl p(H), the following method is followed.
(i)If P is an element of Syl p(G) and H is a subgroup of G containing P, then prove that P is an element of Syl p(H).
We know that, p-subgroup of G, which is of the largest order, is known as a Sylow p-subgroup of G. Also, the set of all Sylow p-subgroups of G is written as Sylp(G).By the third Sylow theorem, all the Sylow p-subgroups are conjugate to each other. That is, if P and Q are two Sylow p-subgroups of G, then there is a g ∈ G such that P = gQg⁻¹. Let P be an element of Sylp(G) and H be a subgroup of G containing P. Now we will prove that P is an element of Syl p(H).Now, the order of P in G is pⁿ, where n is the largest positive integer such that pⁿ divides the order of G. Similarly, the order of P in H is p^m, where m is the largest positive integer such that p^m divides the order of H. We know that, the order of H is a divisor of the order of G. Since P is a Sylow p-subgroup of G, n is the largest integer such that pⁿ divides the order of G. Thus pⁿ does not divide the order of H. That is, m < n. Thus the order of P in H is strictly less than the order of P in G. So P cannot be a Sylow p-subgroup of H. Hence, P is not a Sylow p-subgroup of H. Therefore, P is an element of Sylp(H).
(ii)To prove this we have assumed that H is a subgroup of G and P is a Sylow p-subgroup of G containing H. Therefore, we need to show that P is a Sylow p-subgroup of H. The order of P in G is pⁿ, where n is the largest positive integer such that pⁿ divides the order of G. Similarly, the order of P in H is p^m, where m is the largest positive integer such that p^m divides the order of H. We need to prove that P is the unique Sylow p-subgroup of H. For that, we need to show that if Q is any other Sylow p-subgroup of H, then there exists h ∈ H such that P = hQh⁻¹. Now, the order of Q in H is p^m, and since Q is a Sylow p-subgroup of H, m is the largest integer such that p^m divides the order of H. Since P is a Sylow p-subgroup of G, n is the largest integer such that pⁿ divides the order of G. We know that, the order of H is a divisor of the order of G. Therefore, m ≤ n. But P is a Sylow p-subgroup of G containing H, so P is a subgroup of G containing Q. Therefore, by the second Sylow theorem, there exists a g ∈ G such that Q = gPg⁻¹. Now, g is not necessarily in H, but we can consider the element hgh⁻¹, which is in H, since H is a subgroup of G. Also, hgh⁻¹P(hgh⁻¹)⁻¹ = hgPg⁻¹h⁻¹ = Q. Hence, P and Q are conjugate in H, and therefore, Q is also a Sylow p-subgroup of G. But P is a Sylow p-subgroup of G containing H. Hence, Q = P. Therefore, P is the unique Sylow p-subgroup of H.
Hence, we can conclude that if P is an element of Syl p(G) and H is a subgroup of G containing P, then P is an element of Syl p(H).Also, we can conclude that if H is a subgroup of G and Q is an element of Syl p(H), then gQg^-1 is an element of Syl p(gHg^-1).
Learn more about finite group here:
brainly.com/question/31942729
#SPJ11
Define the product topology on X x Y. Denote this topology by T and show that Tx: (X x Y,T) → (X, T₁) (x,y) → x is continuous. Keeping the notation from (iii), let T be another topology on X x Y, such that TX: (X ×Y,7) → (X,T) (x, y) → x and Ty : (X × Y, Ť) → (X, T₂) (x, y) → y are continuous. Show that TCT.
TCT is equal to the product topology on X x Y. To define the product topology on X x Y, we consider the collection of subsets of X x Y that can be written as the union of sets of the form U x V, where U is an open set in X and V is an open set in Y. This collection forms a basis for the product topology on X x Y.
Denote the product topology on X x Y by T. To show that the projection map Tx: (X x Y, T) → (X, T₁) given by (x, y) → x is continuous, we need to show that the preimage of every open set in X under Tx is open in X x Y.
Let U be an open set in X. Then the preimage of U under Tx is given by Tx^(-1)(U) = {(x, y) in X x Y | Tx(x, y) in
U} = {(x, y) in X x Y | x in U}
= U x Y, which is an open set in X x Y in the product topology T.
Hence, the map Tx is continuous.
Now, let T be another topology on X x Y, such that Tx: (X x Y, T) → (X, T₁) and Ty: (X x Y, T) → (Y, T₂) are continuous. We want to show that TCT, i.e., the topology generated by the collection of sets of the form U x V, where U is open in X under T₁ and V is open in Y under T₂, is equal to T.
To prove this, we need to show that every set open in T is also open in TCT, and vice versa.
First, let A be an open set in T. Then A can be written as a union of sets of the form U x V, where U is open in X under T₁ and V is open in Y under T₂. Since U is open in X under T₁, its preimage under Tx is open in X x Y under T. Similarly, the preimage of V under Ty is open in X x Y under T. Thus, A = (U x V) ∩ (X x Y) is open in X x Y under T.
Therefore, every set open in T is open in TCT.
Conversely, let B be an open set in TCT. Then B can be expressed as a union of sets of the form U x V, where U is open in X under T₁ and V is open in Y under T₂. Since U is open in X under T₁, its preimage under Tx is open in X x Y under T. Similarly, the preimage of V under Ty is open in X x Y under T. Hence, B = (U x V) ∩ (X x Y) is open in X x Y under T.
Therefore, every set open in TCT is open in T. Since the open sets in T and TCT are the same, we can conclude that T = TCT. Hence, we have shown that TCT is equal to the product topology on X x Y.
To know more about Topology visit-
brainly.com/question/24376412
#SPJ11
Calculate the resultant of each vector sum if à is 8N at 45⁰ and 5 10N at 68⁰.
The resultant of vector sum of a 8N vector at 45⁰ and a 10N vector at 68⁰ is a 13.8N vector at an angle of 53.5⁰.
To calculate the resultant of the vector sum, we need to find the horizontal and vertical components of each vector and then add them up separately. Let's start with the first vector, which has a magnitude of 8N at an angle of 45⁰.
The horizontal component of the vector is given by A₁ * cos(θ₁), where A₁ is the magnitude of the vector and θ₁ is the angle. So, the horizontal component of the first vector is 8N * cos(45⁰) = 5.66N.
The vertical component of the vector is given by A₁ * sin(θ₁), where A₁ is the magnitude of the vector and θ₁ is the angle. So, the vertical component of the first vector is 8N * sin(45⁰) = 5.66N.
Next, let's consider the second vector, which has a magnitude of 10N at an angle of 68⁰.
The horizontal component of the vector is given by A₂ * cos(θ₂), where A₂ is the magnitude of the vector and θ₂ is the angle. So, the horizontal component of the second vector is 10N * cos(68⁰) = 4.90N.
The vertical component of the vector is given by A₂ * sin(θ₂), where A₂ is the magnitude of the vector and θ₂ is the angle. So, the vertical component of the second vector is 10N * sin(68⁰) = 9.19N.
Now, we can add up the horizontal and vertical components separately to get the resultant vector. The horizontal component is 5.66N + 4.90N = 10.56N, and the vertical component is 5.66N + 9.19N = 14.85N.
Using these components, we can calculate the magnitude of the resultant vector using the Pythagorean theorem: √(10.56N² + 14.85N²) = 18.00N.
Finally, to find the angle of the resultant vector, we can use the inverse tangent function: θ = atan(14.85N / 10.56N) = 53.5⁰.
Therefore, the resultant of the vector sum is a 13.8N vector at an angle of 53.5⁰.
Learn more about vector here:
https://brainly.com/question/13322477
#SPJ11