a classmate bought a new digital thermometer for her child and tried it on herself a few times with these results: 97.3°f, 98.0°f, 99.0°f, and 97.7°f. calculate her mean temperature.

It takes light approximately 39.5 minutes to travel the distance from the Sun to Jupiter.

Since it takes light approximately 8 minutes to reach the Earth from the surface of the sun, we know that the distance between the sun and the Earth is 1 astronomical unit (1 au).

Therefore, to find out how long it takes light to travel 5 au (the distance between Jupiter and the sun), we can use the following formula:

time = distance ÷ speed of light

The speed of light is approximately 299,792,458 meters per second.

So,

time = 5 au x 149,597,870,700 meters/au ÷ 299,792,458 meters/second
time = 39.5 minutes

Therefore, it takes approximately 39.5 minutes for light to travel from the surface of the sun to Jupiter.

Know more about astronomical unit here:

https://brainly.com/question/15211176

#SPJ11

To find the magnetic field of a wire with a diameter of 9.76 mm and a uniformly distributed current, you'll need to know the current (I) flowing through the wire, and the distance (r) from the center of the wire to the point where you want to measure the magnetic field. You can use Ampere's Law to determine the magnetic field (B).

1. Convert the diameter of the wire to meters: 9.76 mm = 0.00976 m.
2. Calculate the wire's radius: radius = diameter / 2 = 0.00976 m / 2 = 0.00488 m.
3. Determine the current (I) flowing through the wire. This information should be provided in the problem.
4. Determine the distance (r) from the center of the wire to the point where you want to measure the magnetic field.
5. Use Ampere's Law to calculate the magnetic field (B): B = (μ₀ * I) / (2 * π * r), where μ₀ is the permeability of free space (μ₀ = 4π x 10⁻⁷ Tm/A).
6. Plug in the values of I, μ₀, and r into the equation and solve for B.

Once you have followed these steps with the appropriate values for I and r, you will have found the magnetic field at the desired distance from the wire's center.

To know more about magnetic field:

https://brainly.com/question/23096032

#SPJ11

The  evaluated net water flow is 0.08 MPa under the context  that 0.15 mpa is selected as the root tissue and placed it in a 0.1 m solution of sucrose ψ = -0.23 mpa.

Then water potential of root tissue = -0.15 MPa, now  that of a 0.1 M solution of sucrose = -0.23 MPa. Then water potential gradient is

Δψ = ψ1 - ψ2

here

Δψ = water potential gradient,

ψ1 = water potential of root tissue

ψ2 = water potential of a 0.1 M solution of sucrose

Staging the values in the formula

Δψ = (-0.15) - (-0.23)

Δψ = 0.08 MPa

Hence, the level of  sucrose solution has a lower in comparison to  water potential present in the root tissue, therefore water will flow from the sucrose solution into the root tissue.

To learn more about water potential

https://brainly.com/question/6475956

#SPJ4

frame of reference that is not inertial. A non-inertial frame is now defined as a frame that accelerates relative to the underlying inertial reference frame. Newton's law won't be valid.

How does the framework function?

Performance could change depending on the lighting. The Frame automatically modifies the Plasma tvs brightness and contrasting settings after analyzing the lighting conditions in the room and the light level of your content.

What distinguishes a system from a frame?

the hard architecture (bones and condyle) that serves as an animal's body's framework. skeletal system, skeleton, and systema skeletale. system: a collection of organs or bodily parts that function or are anatomically related; "the body contains a system for organs for digestion."

To know more about frame visit:

https://brainly.com/question/9708057

#SPJ1

Option C) is correct in determining its mass from its gravitational pull on a spacecraft, satellite, or planet. Knowing the mass and size of an asteroid allows us to calculate its density.

Option A) is incorrect because reflectivity only tells us about the asteroid's surface properties, not its density. Option B) is incorrect because brightness variations during rotation do not give us enough information to determine density. Option D) and E) are methods of studying asteroids but are not directly related to determining density.

Knowing the size of an asteroid alone is not enough to determine its density, as different materials can have different densities at the same size. By measuring the gravitational pull of the asteroid on a spacecraft, satellite, or planet, we can determine its mass. Once we have the mass and the size, we can calculate the asteroid's density. Methods such as radar mapping and spectroscopic imaging can provide additional information about the asteroid's composition, but they are not directly used to determine its density.

To learn about gravitational pull please visit:

https://brainly.com/question/13467280

#SPJ11

C) calculating its mass based on the gravitational attraction it exerts on a satellite, planet, or spacecraft.

We can determine an asteroid's mass by observing the gravitational pull it has on a neighbouring body, like a planet, satellite, or spacecraft. We can determine the asteroid's density once we know its mass and size. The gravitational force of an object will be stronger the denser it is. As a result, an asteroid must be denser the more massive it is for a given size.

The density of an asteroid can be determined using this method, which is especially helpful for small or erratic-shaped asteroids that are challenging to see using other techniques like radar mapping or spectroscopic imaging. Additionally, it can offer crucial details on the asteroid's makeup and structure, which can aid researchers in understanding the asteroid's formation and evolution.

learn more about mass here:

https://brainly.com/question/18064917

#SPJ11

The correct statement regarding the resolution of a grating is that the resolution increases with the number of grooves per mm, the correct option is (c).

The resolution of a grating is defined as the ability to separate two closely spaced spectral lines or wavelengths. It is determined by the number of grooves per unit length on the grating surface, as well as the wavelength of the incident light and the angle of incidence.

A higher number of grooves per mm means that the grating will disperse the incoming light into more angles, resulting in higher resolution. Therefore, the number of grooves per mm is the primary factor that determines the resolution of a grating, the correct option is (c).

To learn more about resolution follow the link:

https://brainly.com/question/30753488

#SPJ4

The complete question is:

Which statement is true regarding the resolution of a grating?

a. resolution increases with wavelength

b. resolution decreases with number of grooves per mm

c. resolution increases with number of grooves per mm

d. resolution is not determined by the monochromator

e. resolution increases with slit width

The maximum altitude of the rocket is 1,542 km. The result is obtained by using the kinematical equation.

There are 3 main kinematical equations. They are

Where vf is the final velocity, vi is the initial velocity, g is the acceleration due to gravity, and h is the displacement.

We have initial velocity 5.5 km/s. The question is to find the maximum altitude.

Let's convert the initial velocity from km/s to m/s.

5.5 km/s = 5,500 m/s

In this case, at the maximum altitude, the final velocity is zero, vf = 0. While the acceleration due to gravity is g = -9.81 m/s².

We can use the second equation to get the maximum altitude, h
vf² = vi² + 2gh

0 = 5,500² - 2(9.81)h

30,250,000 = 19.62 h

h = 1,541,794 meters

h ≈ 1,542 km

Therefore, the maximum altitude the rocket will reach is approximately 1,542 km.

Learn more about kinematical equation here:

brainly.com/question/31086903

#SPJ11

When the switch is closed, the circuit is completed, and the current starts flowing. The behavior of each bulb depends on the arrangement of the bulbs and the switch in the circuit.

If the bulbs are arranged in a series circuit, the current flows through both bulbs in the same direction. In this case, the voltage across each bulb is proportional to its resistance. Therefore, if the bulbs have the same resistance, they will have the same voltage across them. If one bulb has a higher resistance than the other, it will have a higher voltage across it. The current flowing through both bulbs will be the same, but the voltage across them will differ.

If the bulbs are arranged in a parallel circuit, the current splits into different branches and each branch contains a bulb. In this case, the voltage across each bulb is the same, and the current flowing through each bulb is proportional to its resistance. Therefore, if one bulb has a higher resistance than the other, it will have a lower current flowing through it. If one bulb has a lower resistance than the other, it will have a higher current flowing through it. The voltage across both bulbs stays the same, and no other bulb becomes short-circuited.

In conclusion, the behavior of each bulb depends on the arrangement of the circuit. If the bulbs are arranged in a series circuit, the voltage across them differs, and the current flowing through them is the same. If the bulbs are arranged in a parallel circuit, the voltage across them is the same, and the current flowing through them differs.

To learn more about circuit

https://brainly.com/question/27206933

#SPJ4

Complete question:

What happens to each bulb if the switch is closed? Match the words in the left column to the appropriate blanks in the sentences on the right. Res through both bulbs Once the switch is closed, the current flows because only through bulb A only through bulb B the voltage across it becomes zero the voltages across them stay the same another bulb becomes short-circuited no branch of a circuit is opened.

Answer:

The mass of the apple is 0.49kg

Explanation:

Potential energy=mgh

P=mgh

6=m×1.22×10

6=12.2m

divide both sides by 12.2

m=6/12.2

m=0.49kg

Numerous tiny ice and rock fragments make up the planet's ring system. The four jovian planets differ from one another in terms of colour and shape.

All rings lie in the planet's equatorial plane. Jupiter's rings are the brightest and widest among jovian planets. Their particles consist mostly of small, dark rock fragments. Saturn's rings are mostly dusty and less visible. Uranus and Neptune both have narrow bright rings divided by very sparse dusty rings in between. Uranus's narrow rings show irregularities in the form of brighter arcs, as if the rings were incomplete.

Planetary rings are made up of countless small particles composed of ice and rock. All rings lie in the equatorial plane. Rings' particles have elliptical orbits. Saturn's rings are the brightest and widest among jovian planets. Their particles consist mostly of ice. Jupiter's rings are mostly dusty and less visible. Uranus and Neptune both have narrow bright rings divided by very sparse dusty rings in between. Neptune's narrow rings show irregularities in the form of brighter arcs, as if the rings were incomplete.

For more such questions on Planetary rings , Visit:

https://brainly.com/question/9828009

#SPJ11

The charge on a discharging capacitor decreases exponentially with time, and the rate of the decrease is determined by the resistance and capacitance values in the circuit.

The charge on a discharging capacitor decreases exponentially with time according to the following equation:

[tex]Q(t) = Q0 * e^{-t / (R * C})[/tex]

where Q(t) is the charge on the capacitor at time t, Q0 is the initial charge on the capacitor, R is the resistance in the circuit, C is the capacitance of the capacitor, and e is the mathematical constant known as Euler's number.

The time constant for the discharging process is given by the product of resistance and capacitance,

τ = R * C.

The time constant represents the time it takes for the charge on the capacitor to decrease to approximately 36.8% of its initial value

(i.e.,[tex]Q(τ) = Q0 * e^{-1} ≈ 0.368 * Q0[/tex]).

Therefore, the charge on a discharging capacitor decreases exponentially with time, and the rate of the decrease is determined by the resistance and capacitance values in the circuit.

For more such questions on metabolism , Visit:

https://brainly.com/question/25923373

#SPJ11

The rate at which energy is being dissipated as Joule heat in a resistor can be calculated using the formula [tex]P=I^2R[/tex], and after an elapsed time equal to the time constant of the circuit, the power dissipated by the resistor can be given by [tex]P=0.4I^2 \times R[/tex].

The rate at which energy is being dissipated as Joule heat in a resistor is equal to the power dissipated by the resistor, which can be calculated using the formula [tex]P=0.4I^2\times R[/tex], where P is the power dissipated in watts, I is the current flowing through the resistor in amperes, and R is the resistance of the resistor in ohms.

After an elapsed time equal to the time constant of the circuit, the current flowing through the circuit will have reached approximately 63.2% of its maximum value. This is because the time constant of a circuit is equal to the product of the resistance and the capacitance, and it represents the amount of time it takes for the current in the circuit to reach 63.2% of its maximum value.

At this point, the power dissipated by the resistor can be calculated using the formula [tex]P=0.4I^2 \times R[/tex]. Since the current is 63.2% of its maximum value, we can substitute 0.632I for I in the formula. Therefore, the power dissipated by the resistor at this point is:

P = (0.632*I)^2 * R

= [tex]P=0.4I^2 \times R[/tex]

where I is the maximum current that will flow through the circuit, and R is the resistance of the resistor in ohms.

The rate at which energy is being dissipated as Joule heat in the resistor is equal to the power dissipated by the resistor, which is given by the above equation. Therefore, the answer to the question is:

Rate of energy dissipation = [tex]P=0.4I^2 \times R[/tex] watts

where I is the maximum current that will flow through the circuit, and R is the resistance of the resistor in ohms.

To learn more about resistors

https://brainly.com/question/24297401

#SPJ4

The two forces on Earth that could change the motion of an object are friction and gravity.

Friction is a force that opposes the motion of an object when it is in contact with another surface. It can cause an object to slow down or come to a stop.

Gravity is a force of attraction between two objects, and it can cause an object to accelerate toward the center of the earth or towards another massive object. The gravitational force on an object depends on its mass and the distance between it and the other object.

Speed and acceleration are not forces, but rather measures of motion. Heat and light are also not forces that can change the motion of an object, but rather forms of energy that can be transferred to an object and affect its temperature or behavior. Direction and time are not forces, but concepts related to an object's motion.

Learn More about Newton's first law of motion:

https://brainly.com/question/1222214

The velocity of a proton when it enters the magnetic field is [tex]1.58 × 10^7 m/s.[/tex]

We can use the equation for the magnetic force on a charged particle to solve this problem:

F = qvBsinθ

where F is the magnetic force, q is the charge of the particle, v is its velocity, B is the magnetic field, and θ is the angle between the velocity vector and the magnetic field.

Since the proton has a positive charge, it will experience a force perpendicular to its velocity vector, which will cause it to move in a circular path in the plane of the page.

The centripetal force required to keep the proton in a circular path is provided by the magnetic force, so we can equate the two forces:

[tex]F = mv^2/r[/tex]

where m is the mass of the proton, and r is the radius of the circular path.

Equating these two forces, we get:

[tex]qvBsinθ = mv^2/r[/tex]

Solving for the radius, we get:

[tex]r = mv/qBsinθ[/tex]

Substituting the given values, we get:

[tex]r = (1.67 × 10^-27 kg)(3 × 10^8 m/s)/((1.6 × 10^-19 C)(1.00 T)sinθ) = 3.32 × 10^-3/sinθ meters[/tex]

The kinetic energy of the proton is also given, which can be related to its speed v:

[tex]K = (1/2)mv^2[/tex]

[tex]v = sqrt(2K/m) = sqrt((2)(6.00 × 10^6 eV)(1.6 × 10^-19 J/eV)/(1.67 × 10^-27 kg)) = 1.58 × 10^7 m/s[/tex]

Substituting this value for v, we get:

[tex]r = (1.67 × 10^-27 kg)(1.58 × 10^7 m/s)/((1.6 × 10^-19 C)(1.00 T)sinθ) = 1.05 × 10^-3/sinθ meters[/tex]

Finally, we can solve for sinθ:

[tex]sinθ = r/(1.05 × 10^-3 meters) = (3.32 × 10^-3 meters)/(1.05 × 10^-3 meters) = 3.15[/tex]

However, since sinθ can only range from -1 to 1, this value is not physically meaningful. Therefore, we can conclude that the proton cannot enter the magnetic field at any angle that will result in a circular path.

Learn more about magnetic field

brainly.com/question/14848188

#SPJ11

The acceleration of the box is [tex]4.02 m/s^2[/tex]to the right.

To find the net force acting on the box, we need to add up the individual forces acting on it. The horizontal forces cancel each other out (9.5 N to the right - 6.2 N to the left = 3.3 N to the right), and the vertical forces also cancel each other out (8.0 N up - 8.0 N down = 0 N).

So the net force acting on the box is 3.3 N to the right. We can use Newton's second law of motion, which states that force equals mass times acceleration (F=ma), to find the acceleration of the box.

Rearranging the equation, we get a = F/m. Plugging in the values, we get

a = 3.3 N / 0.82 kg

a = [tex]4.02 m/s^2 to the right[/tex]

Therefore, the acceleration of the box is[tex]4.02 m/s^2[/tex] to the right.

Learn more about  the acceleration

https://brainly.com/question/12550364

#SPJ4

The box is under a net force of 1.3 N to the right. The box accelerates to the right at a rate of 1.6 m/s2.

By deducting the forces acting to the left (6.2 N) and the forces acting to the right (9.5 N), we can get the net force, which is 3.3 N to the right. In order to get a net force of 0 N in the vertical direction, we must first subtract the forces acting upward (8.0 N) from the forces acting downward (8.0 N). The box won't accelerate vertically because there is no net force acting in that direction. The box will therefore move more quickly to the right due to the net force of 3.3 N. We may calculate the acceleration to be 1.6 m/s2 to the right using Newton's second law, F = ma.

learn more about box accelerates here:

https://brainly.com/question/14782846

#SPJ11

If the electric field moves the charge from A to B by doing 0.052 J of work, we must determine the potential difference between a and B. That much is clear. The voltage differential is 9122.8 volts as a result.

Moving a +5.7-C charge between A and B causes the electric field to exert 0.052 J of work. When a charge q is transported from point A to point B, the potential difference between the two points is defined as the change in potential energy of the charge divided by the charge, or V = VB - VA. Voltage, also known as potential difference, is frequently abbreviated to V.

The SI unit for electric potential is volt (V). Potential difference is calculated using the method V = W/Q. Joules and Coulombs are the equivalent SI units for work and positive charge, respectively. Consequently, the formula can be written as VB-VA = WA B/Q.

To know more about electric field visit:-

https://brainly.com/question/15800304

#SPJ1

The total mechanical energy of the system is 0.0066 J.

Using Hooke's Law, the spring constant can be calculated as k = F/x, where F is the weight of the mass and x is the displacement of the spring from its rest position.

In this case:

F = mg,

where m is the mass of the object and g is the acceleration due to gravity.

Therefore, k = (mg)/x.

Once the spring constant is known, the total mechanical energy of the system can be calculated as:

E = (1/2)kx^2.

Substituting the given values, we get

k = 14.7 N/m and x = 0.03 m.

Hence, the total mechanical energy of the system is

E = (1/2)kx^2 = 0.0066 J.

To know more about Hooke's Law, here

brainly.com/question/29126957

#SPJ4

The intensity of the fire alarm that measures 125 dB loud is approximately 3.16 W/[tex]m^{2}[/tex].

To calculate the intensity (I) of a fire alarm that measures 125 dB loud, we need to use the formula for loudness (L):

L = 10 * log10(I / Io)

In this formula, L is the loudness (in dB), I is the intensity of the sound, and Io is the reference intensity ([tex]10^{-12}[/tex] W/[tex]m^{2}[/tex]). We are given L = 125 dB and we want to find I. First, we need to rearrange the formula to solve for I:

I = Io *[tex]10^{L/10}[/tex]

Now, plug in the given values:

I = 10^-12 *[tex]10^{125/10}[/tex]
I = 10^-12 * [tex]10^{12.5}[/tex]
I ≈ 3.16 W/[tex]m^{2}[/tex]

The intensity of the fire alarm that measures 125 dB loud is approximately 3.16 W/[tex]m^{2}[/tex]

Know more about   intensity   here:

https://brainly.com/question/28145811

#SPJ11

Answer:

The answer for Work done is ≈224J or 224Nm

Explanation:

Work done=F×D

F=mg

F=W

d=15×22=330cm=3.3m

W=67.8×3.3

W=223.74J or 223.7Nm

W≈224J or 224 Nm

The instantaneous angular velocity is 20.0 s is 400 rad/s.

Since the angular acceleration is constant, we can use the formula:

[tex]θ = 1/2 * α * t^2 + ω0 * t[/tex]

where

[tex]θ = angle rotated = 50 rad[/tex]

[tex]α = angular acceleration[/tex]

[tex]t = time = 5.0 s[/tex]

[tex]ω0 = initial angular velocity = 0 (starting from rest)[/tex]

Solving for α, we get:

[tex]α = 2 * (θ - ω0 * t) / t^2 = 2 * 50 rad / 5.0 s^2 = 20 rad/s^2[/tex]

Now, using the formula:

[tex]ω = α * t + ω0[/tex]

where

ω = instantaneous angular velocity at the end of 20.0 s (what we need to find)

[tex]α = angular acceleration = 20 rad/s^2[/tex]

[tex]t = time = 20.0 s[/tex]

[tex]ω0 = initial angular velocity = 0 (starting from rest)[/tex]

we get:

[tex]ω = 20 rad/s^2 * 20.0 s + 0 = 400 rad/s[/tex]

Therefore, the instantaneous angular velocity of the disk at the end of 20.0 s is 400 rad/s.

Learn more about angular acceleration

brainly.com/question/29428475

#SPJ11

The magnetic force acting on the charged particle is -0.707 N in the k direction and 0.707 N in the j direction.

In this problem, the charge of the particle is given as 1 C, and the velocity of the particle is 1 m/s at an angle of 45 degrees to the positive x-axis. We can break down the velocity vector into its x and y components as follows:

vx = vcos(45) = 0.707 m/s

vy = vsin(45) = 0.707 m/s

The magnetic field is given as 1 T in the negative x direction.

Substituting these values into the formula for the magnetic force, we get:

F = q * (vxi + vyj + 0k) x (-Bi)

where I, j, and k are the unit vectors in the x, y, and z directions, respectively.

Expanding the cross product, we get:

F = q*(-vxB)k + qvyB*j

Substituting the values for q, vx, vy, and B, we get:

F = (1 C) (-0.707 m/s) (1 T) k + (1 C) (0.707 m/s) *(1 T) *j

Simplifying, we get:

F = -0.707 k + 0.707 j

To know more about Charge:

https://brainly.com/question/3412043

#SPJ4

To determine the net force required to accelerate a 20-kg object at 6.0 m/s² on the moon, we need to consider the acceleration due to gravity on the moon and the object's mass.

The acceleration due to gravity on the moon is one-sixth that on Earth. Since the acceleration due to gravity on Earth is approximately 9.81 m/s², the acceleration due to gravity on the moon is (1/6) * 9.81 m/s² ≈ 1.63 m/s².

Now, we can use Newton's second law of motion, F = m * a, to find the net force required for the given acceleration on the moon. Here, m = 20 kg (mass of the object) and a = 6.0 m/s² (desired acceleration).

Net force (F) = 20 kg * 6.0 m/s² = 120 N.

So, the net force required to accelerate a 20-kg object at 6.0 m/s² on the moon is 120 N.

To know more about Newton's second law of motion:

https://brainly.com/question/27712854

#SPJ11

Hydrolysis is a chemical reaction in which water is used to break down complex molecules into simpler ones.

This process is more common in a humid or wet climate. In such climates, water is readily available and tends to accumulate in soils and rocks, leading to the formation of aqueous solutions. These solutions can then react with various minerals and organic compounds, promoting hydrolysis. Moreover, the presence of high temperatures and abundant vegetation in tropical climates accelerates the process of hydrolysis.

This results in the decomposition of organic matter, which releases nutrients and minerals that can support plant growth. Overall, hydrolysis plays a crucial role in many environmental processes and is particularly important in regions with high moisture levels.

Learn more about complex molecules

https://brainly.com/question/30336127

#SPJ4

Water is utilised in a chemical procedure called hydrolysis to convert complicated molecules into simpler ones.

A humid or moist climate favours this procedure more frequently. In such environments, water is easily accessible and has a propensity to build up in rocks and soils, resulting in the creation of aqueous solutions. The subsequent reactions between these solutions and different minerals and organic molecules can encourage hydrolysis. Additionally, tropical areas' high temperatures and plenty of flora hasten the hydrolysis process.

This causes organic materials to decompose, releasing nutrients and minerals that can help plants flourish. Overall, hydrolysis is critical to many environmental processes and is especially significant in areas with high levels of moisture.

learn more about complicated molecules here:

https://brainly.com/question/13443071

#SPJ11

If a wrench is 28 cm long, the mechanic must exert a force of 3.57 N perpendicular to the wrench at its end.

To solve this problem, we need to use the formula:

Force = Torque / Distance

where Torque is the product of force and distance. In this case, we know the distance (28 cm), but we need to find the torque first.

Assuming that the mechanic is applying a force perpendicular to the wrench, the torque can be calculated as:

Torque = Force x Distance

where Force is the force exerted by the mechanic at the end of the wrench and Distance is the length of the wrench (28 cm).

Rearranging the formula, we get:

Force = Torque / Distance

Substituting the values, we get:

Force = (Torque) / (Distance)
Force = (1 N.m) / (0.28 m)
Force = 3.57 N

Therefore, the mechanic must exert a force of 3.57 N perpendicular to the wrench at its end. The unit for force is Newtons (N).

More on force: https://brainly.com/question/22597079

#SPJ11

The hotter an object is, the brighter and redder it appears, while cooler objects appear dimmer and bluer.

The question is asking about the relationship between an object's temperature and its brightness, color, and speed. The correct answers are that the hotter an object is, the brighter it appears and the redder it appears.

This is because hot objects emit more light, including more of the red end of the spectrum. The opposite is also true, meaning that cooler objects appear dimmer and bluer.

The speed of an object is not directly related to its temperature, so that answer is incorrect. However, it is important to note that the temperature of an object can affect its movement and velocity in certain situations.

To learn more about : objects

https://brainly.com/question/28308143

#SPJ11

Answer:

[tex]752.1\; {\rm N}[/tex] from support [tex]\texttt{1}[/tex] ([tex]2.0\; {\rm m}[/tex] from the student.)

[tex]1013.7\; {\rm N}[/tex] from support [tex]\texttt{2}[/tex] ([tex]1.0\; {\rm m}[/tex] from the student.)

(Assuming that [tex]g = 9.81\; {\rm N\cdot kg^{-1}}[/tex], the beam is level with negligible height, and that the density of the beam is uniform.)

Explanation:

Weight of the beam: [tex](100\; {\rm kg})\, (9.81\; {\rm N\cdot kg^{-1}}) = 981\; {\rm N}[/tex].

Weight of the student: [tex](80\; {\rm kg})\, (9.81\; {\rm N\cdot kg^{-1}}) = 784.8\; {\rm N}[/tex].

Assuming that the beam is uniform. The center of mass of the beam will be [tex](1/2)\, (3.0\; {\rm m}) = 1.5\; {\rm m}[/tex] away from each support.

Consider support [tex]\texttt{1}[/tex] as the fulcrum:

Hence:

[tex]\begin{aligned}N_{\texttt{2}}\, (3.0) = (981)\, (1.5) + (784.8) \, (2.0) \end{aligned}[/tex].

[tex]\begin{aligned}N_{\texttt{2}} &= \frac{(981)\, (1.5) + (784.8) \, (2.0)}{3.0} \; {\rm N} = 1013.7\; {\rm N}\end{aligned}[/tex].

In other words, support [tex]\texttt{2}[/tex] would exert an upward force of [tex]1013.7\; {\rm N}[/tex] on the beam.

Similarly, consider support [tex]\texttt{2}[/tex] as the fulcrum:

Hence:

[tex]\begin{aligned}N_{\texttt{1}}\, (3.0) = (981)\, (1.5) + (784.8) \, (1.0) \end{aligned}[/tex].

[tex]\begin{aligned}N_{\texttt{1}} &= \frac{(981)\, (1.5) + (784.8) \, (1.0)}{3.0} \; {\rm N} =752.1\; {\rm N}\end{aligned}[/tex].

In other words, support [tex]\texttt{1}[/tex] would exert an upward force of [tex]752.1\; {\rm N}[/tex] on the beam.

Polaris and Kochab's apparent magnitude of 2 and their proximity to the celestial pole make them appear larger in a photo or planetarium simulation compared to other stars.

A comparatively brilliant star as compared to other stars in the night sky, Kochab and Polaris both have an apparent magnitude of 2, making them both bright stars. In addition, they are both close to the celestial pole, which gives them a motionless appearance in the sky while giving the impression that other stars are rotating around them.

They stand out in the night sky because of their fixed location and brightness, and because of their brightness and proximity to the celestial equator, they look bigger than other stars in pictures or planetarium simulations.

Learn more about planetariums:

https://brainly.com/question/23119731

#SPJ4

(a) Coils are located 31.58 cm away from the mirror.

(b) Magnification is -9.50, indicating an inverted image, and the large magnitude helps spread out the reflected energy for effective heating.

(a) We can use the mirror equation to solve for the distance of the object (coils) from the mirror:

1/f = 1/do + 1/di

where f is the focal length (half the radius of curvature), do is the distance of the object from the mirror, and di is the distance of the image from the mirror.

Substituting the given values, we get:

1/25 = 1/do + 1/300

Solving for do, we get:

do = 31.58 cm

So the coils are 31.58 cm away from the mirror.

(b) The magnification, M, is given by:

M = -di/do

Substituting the given values, we get:

M = -3.00 m / 0.3158 m

M = -9.50

The negative sign indicates that the image is inverted. The large magnitude of the magnification means that the reflected energy is spread out over a large area, making the heater more effective at heating a room.

Learn more about Magnification

https://brainly.com/question/31595015

#SPJ4

Answer:

1990.47 m/s

Explanation:

Answer: the answer is in the screen shots

Explanation:

The solid forms of ice last longer because there is more weight with less surface area. This statement is false.

Factors like temperature, shape, size, humidity and impurities are some of the factor decides the time for which the ice survives. Even though larger ice particles may have more surface area than solid forms of ice, this does not always imply that they will persist longer.

In reality, due to the insulating effect of the ice itself, larger ice formations, like glaciers, can melt more quickly. In the end, a complex combination of physical, chemical, and environmental elements determines how long ice will last.

To know more about Melting of ice, visit,

https://brainly.com/question/1079154

#SPJ4