A circular loop in a variable magnetic field B whose direction is out of the plane of this sheet, if the current I, with a clockwise direction, is induced in the loop, then the magnetic field B is decreasing.
The given Figure 1 shows a circular loop in a variable magnetic field B, whose direction is out of the plane of this sheet. If the current I, with a clockwise direction, is induced in the loop, then the magnetic field B is decreasing. This is because the magnetic field induces an emf in the loop, which in turn induces a current. The current creates its own magnetic field which opposes the magnetic field that created it. This is known as Lenz's Law. Lenz's Law states that the direction of the induced emf is such that it produces a current which opposes the change in the magnetic field that produced it. Hence, the direction of the induced current is clockwise, which opposes the magnetic field and thus, decreases it. Therefore, the magnetic field B is decreasing.
To know more about Lenz's Law visit:
brainly.com/question/12876458
#SPJ11
1- Electromagnetic spectrum (complete), 2- Properties of waves, 3- Properties of particles, 4- Where does the classical model fail? 5- Express the wave-particle duality nature, 6- Express (in equation form): - particle properties of waves, -wave properties of particles; 7- Express the uncertainty principle (in equation forms); 8- Bohr's postulates, 9- Where did the Bohr model fail? 10- Wave function: - what is it? - what does it describe? - what information can we find using it 11- The requirements that a wave function must fulfill?? 12- Schrodinger equation,
The electromagnetic spectrum refers to the range of all possible electromagnetic waves, including radio waves, microwaves, infrared, visible light, ultraviolet, X-rays, and gamma rays.Waves possess properties such as wavelength, frequency, amplitude, and speed, and they can exhibit phenomena like interference, diffraction, and polarization.Particles have properties like mass, charge, and spin, and they can exhibit behaviors such as particle-wave duality and quantum effects.
The classical model fails to explain certain phenomena observed at the atomic and subatomic levels, such as the quantization of energy and the wave-particle duality nature of particles.
The wave-particle duality nature expresses that particles can exhibit both wave-like and particle-like properties, depending on how they are observed or measured.
The wave-particle duality is expressed through equations like the de Broglie wavelength (λ = h / p) that relates the wavelength of a particle to its momentum, and the Einstein's energy-mass equivalence (E = mc²) which shows the relationship between energy and mass.
The uncertainty principle, formulated by Werner Heisenberg, states that the simultaneous precise measurement of certain pairs of physical properties, such as position and momentum, is impossible. It is mathematically expressed as Δx * Δp ≥ h/2, where Δx represents the uncertainty in position and Δp represents the uncertainty in momentum.
Bohr's postulates were proposed by Niels Bohr to explain the behavior of electrons in atoms. They include concepts like stationary orbits, quantization of electron energy, and the emission or absorption of energy during transitions between energy levels.
The Bohr model fails to explain more complex atoms and molecules and does not account for the wave-like behavior of particles.
The wave function is a fundamental concept in quantum mechanics. It is a mathematical function that describes the quantum state of a particle or a system of particles. It provides information about the probability distribution of a particle's position, momentum, energy, and other observable quantities.
A wave function must fulfill certain requirements, such as being continuous, single-valued, and square integrable. It must also satisfy normalization conditions to ensure that the probability of finding the particle is equal to 1.
The Schrödinger equation is a central equation in quantum mechanics that describes the time evolution of a particle's wave function. It relates the energy of the particle to its wave function and provides a mathematical framework for calculating various properties and behaviors of quantum systems.
Learn more about Electromagnetic spectrum:
https://brainly.com/question/23727978
#SPJ11
(10%) Problem 2: The image shows a rocket sled, In the top image all four forward thrusters are engaged, creating a total forward thrust of magnitude 47, where T =519 N. In the bottom image, in addition to the four forward thrusters, one reverse thruster is engaged, creating a reverse thrust of magnitude 7. In both cases a backward force (friction and air drag) of magnitude f = 20 Nacts on the sled. 7 What is the ratio of the greater acceleration to the lesser acceleration?
The ratio of the greater acceleration to the lesser acceleration is approximately 0.985.
In the top image where all four forward thrusters are engaged, the total forward thrust exerted on the sled is 519 N. The backward force due to friction and air drag is 20 N. Using Newton's second law, we can calculate the acceleration in this case:
Forward thrust - Backward force = Mass * Acceleration
519 N - 20 N = Mass * Acceleration₁
In the bottom image, in addition to the four forward thrusters, one reverse thruster is engaged, creating a reverse thrust of magnitude 7 N. The backward force of friction and air drag remains the same at 20 N. The total forward thrust can be calculated as:
Total forward thrust = Forward thrust - Reverse thrust
Total forward thrust = 519 N - 7 N = 512 N
Again, using Newton's second law, we can calculate the acceleration this case:
Total forward thrust - Backward force = Mass * Acceleration
512 N - 20 N = Mass * Acceleration₂
To find the ratio of the greater acceleration (Acceleration₂) to the lesser acceleration (Acceleration₁), we can divide the equations:
(Acceleration₂) / (Acceleration₁) = (512 N - 20 N) / (519 N - 20 N)
Simplifying the expression, we get:
(Acceleration₂) / (Acceleration₁) = 492 N / 499 N
(Acceleration₂) / (Acceleration₁) ≈ 0.985
To learn more about magnitude -
brainly.com/question/32755502
#SPJ11
Determine the amount of current through each resistor in this circuit, if each 3-band resistor has a color code of Brn, Blk, Red: Choose one • 1 point R₂ E 45 volts O R1-0.0015 A R2-0.0015 A R3-0.
The amount of current through each resistor in the given circuit with 3-band resistors (color code: Brn, Blk, Red) is as follows:
R1 - 0.0015 A
R2 - 0.0015 A
R3 - 0.0015 A
In the color code for 3-band resistors, the first band represents the first digit, the second band represents the second digit, and the third band represents the multiplier. Considering the color code Brn (Brown), Blk (Black), Red (Red), we can determine the resistance values of the resistors in the circuit.
The first band, Brn, corresponds to the digit 1. The second band, Blk, corresponds to the digit 0. The third band, Red, corresponds to the multiplier of 100. Combining these values, we get a resistance of 10 * 100 = 1000 ohms (or 1 kilohm).
Since the voltage across the circuit is given as 45 volts and the resistance of each resistor is 1 kilohm, we can use Ohm's Law (V = IR) to calculate the current flowing through each resistor.
Applying Ohm's Law, we have:
R = 1000 ohms (1 kilohm)
V = 45 volts
I = V / R = 45 / 1000 = 0.045 A (or 45 mA)
Therefore, the current through each resistor in the circuit is:
R1 - 0.045 A
R2 - 0.045 A
R3 - 0.045 A
Learn more about resistors
brainly.com/question/30672175
#SPJ11
MA2: A-5 uC charge travels from left to right through a magnetic field pointed out of the board. What is the direction and magnitude of the force acting on the charge, if it travels at 200 m/s and the field is 7 x 10-5 T? Sketch the scenario.
Given:
Charge q = +5 µC = 5 × 10⁻⁶ C
Velocity of charge, v = 200 m/s
Magnetic field strength, B = 7 × 10⁻⁵ T
Answer: The direction of the force acting on the charge is upwards and the magnitude of the force is 7 × 10⁻⁷ N.
To determine:
The direction and magnitude of the force acting on the charge.
Sketch the scenario using right-hand rule. The force acting on a moving charged particle in a magnetic field can be determined using the equation;
F = qvBsinθ
Where, q is the charge of the
is the velocity of the particle
B is the magnetic field strength
θ is the angle between the velocity of the particle and the magnetic field strength
In this problem, the magnetic field is pointing out of the board. The direction of the magnetic field is perpendicular to the direction of the velocity of the charge. Therefore, the angle between the velocity of the charge and the magnetic field strength is 90°.
sin90° = 1
Putting the values of q, v, B, and sinθ in the above equation,
F= 5 × 10⁻⁶ × 200 × 7 × 10⁻⁵ × 1
= 7 × 10⁻⁷ N
The direction of the force acting on the charge can be determined using the right-hand rule. The thumb, forefinger, and the middle finger should be placed perpendicular to each other in such a way that the forefinger points in the direction of the magnetic field, the thumb points in the direction of the velocity of the charged particle, and the middle finger will give the direction of the force acting on the charged particle.
As per the right-hand rule, the direction of the force is upwards. Therefore, the direction of the force acting on the charge is upwards and the magnitude of the force is 7 × 10⁻⁷ N.
Learn more about magnitude of force here
https://brainly.com/question/30015989
#SPJ11
Q|C A ball dropped from a height of 4.00m makes an elastic collision with the ground. Assuming no mechanical energy is lost due to air resistance, (a) show that the ensuing motion is periodic.
The ensuing motion of the ball dropped from a height of 4.00m and making an elastic collision with the ground is periodic, as it follows a repetitive pattern.
The ensuing motion of a ball dropped from a height of 4.00m and making an elastic collision with the ground is periodic.
This is due to the conservation of mechanical energy, which states that the total mechanical energy of a system remains constant when only conservative forces, such as gravity, are acting.
In this case, the gravitational potential energy of the ball is converted into kinetic energy as it falls towards the ground.
Upon collision, the ball rebounds with the same speed and in the opposite direction.
This means that the kinetic energy is converted back into gravitational potential energy as the ball ascends. This process repeats itself as the ball falls and rises again.
Since the ball follows the same path and repeats its motion over a regular interval, the ensuing motion is periodic.
Each complete cycle of the ball falling and rising is considered one period. The period depends on the initial conditions and the properties of the ball, such as its mass and elasticity.
Therefore, the ensuing motion of the ball dropped from a height of 4.00m and making an elastic collision with the ground is periodic, as it follows a repetitive pattern.
to learn more about elastic collision
https://brainly.com/question/33268757
#SPJ11
Which kind of a lens cannot produce an enlarged image of an object? Neither one can produce enlarged images Diverging Converging Both can produce enlarged images
A diverging lens cannot produce an enlarged image of an object. Diverging lenses, also known as concave lenses, are thinner in the middle and thicker at the edges.
A concave lens is one that bends a straight light beam away from the source and focuses it into a distorted, upright virtual image. Both actual and virtual images can be created using it. At least one internal surface of concave lenses is curved. Since it is rounded at the center and bulges outward at the borders, a concave lens is also known as a diverging lens because it causes the light to diverge. Since they make distant objects appear smaller than they actually are, they are used to cure myopia.
They cause light rays to spread out or diverge after passing through them. As a result, the image formed by a diverging lens is always virtual, upright, and smaller than the actual object. The image formed by a diverging lens appears closer to the lens than the actual object.
Therefore, a diverging lens cannot produce an enlarged image.
To know more about lens:
https://brainly.com/question/32340294
#SPJ4
A circuit has a 42.3 pF capacitor, a 59.6 pF capacitor and a
69.4 pF capacitor in parallel with each other. What is the
equivalent capacitance (in pico-Farads) of these three
capacitors?
The equivalent capacitance of three capacitors in parallel is 171.3 pF.
The equivalent capacitance of three capacitors in parallel is the sum of the individual capacitances. Here, we have three capacitors of capacitance 42.3 pF, 59.6 pF, and 69.4 pF, which are in parallel to each other. Thus, the total capacitance is the sum of these three values as follows;
Total capacitance = 42.3 pF + 59.6 pF + 69.4 pF = 171.3 pF Therefore, the equivalent capacitance of these three capacitors is 171.3 pico-Farads. Another way to represent the total capacitance of capacitors in parallel is by using the formula shown below. Here, C1, C2, C3,....Cn represents the capacitance of capacitors that are connected in parallel. C = C1 + C2 + C3 + .......Cn .
Thus, in the present problem, substituting the values of the three capacitors, we get, C = 42.3 pF + 59.6 pF + 69.4 pF = 171.3 pF.
To know more about capacitance visit
https://brainly.com/question/13200919
#SPJ11
The average surface temperature of a planet is 292 K. Part A What is the frequency of the most intense radiation emitted by the planet into outer space?
The frequency of the most intense radiation emitted by the planet into outer space is 1.148 x 10^12 Hz
The answer to the first part of the question "The average surface temperature of a planet is 292 K" is given, and we need to determine the frequency of the most intense radiation emitted by the planet into outer space.
Frequency can be calculated using Wien's displacement law.
According to Wien's law, the frequency of the radiation emitted by a body is proportional to the temperature of the body.
The frequency of the most intense radiation emitted by the planet into outer space can be found using Wien's law.
The formula for Wien's law is:
λ_maxT = 2.898 x 10^-3,
whereλ_max is the wavelength of the peak frequency,T is the temperature of the planet in kelvin, and, 2.898 x 10^-3 is a constant.
The frequency of the most intense radiation emitted by the planet into outer space can be found using the relation:
c = fλ
c is the speed of light (3 x 10^8 m/s), f is the frequency of the radiation emitted by the planet, λ is the wavelength of the peak frequency
We can rearrange Wien's law to solve for the peak frequency:
f = c/λ_maxT
= c/(λ_max * 292)
Substitute the values and calculate:
f = (3 x 10^8 m/s)/(9.93 x 10^-7 m * 292)
= 1.148 x 10^12 Hz
Therefore, the frequency of the most intense radiation emitted by the planet into outer space is 1.148 x 10^12 Hz.
Let us know more about average surface temperature : https://brainly.com/question/29288703.
#SPJ11
To determine the arbitrary quantity: q = x²y – xy2 A scientist measure x and y as follows: x = 3.0 + 0.1 and y = 2.0 + 0.1 Calculate the uncertainty in q.
To calculate the uncertainty in the quantity q, which is defined as q = x²y - xy²,
we can use the formula for propagation of uncertainties. In this case, we are given that x = 3.0 ± 0.1 and y = 2.0 ± 0.1, where Δx = 0.1 and Δy = 0.1 represent the uncertainties in x and y, respectively.
We can rewrite the formula for q as q = xy(x - y). Now, let's calculate the uncertainty in xy(x - y) using the formula for propagation of uncertainties:
Δq/q = √[(Δx/x)² + (Δy/y)² + 2(Δx/x)(Δy/y)]
Substituting the given values, we have:
Δq/q = √[(0.1/3.0)² + (0.1/2.0)² + 2(0.1/3.0)(0.1/2.0)]
Δq/q = √[(0.01/9.0) + (0.01/4.0) + 2(0.01/6.0)(0.01/2.0)]
Δq/q = √[0.001111... + 0.0025 + 2(0.000166...)]
Δq/q = √[0.001111... + 0.0025 + 2(0.000166...)]
Δq/q = √[0.003777... + 0.000333...]
Δq/q = √[0.004111...]
Δq/q ≈ 0.064 or 6.4%
Therefore, the uncertainty in q is approximately 6.4% of its value.
Answer: 6.4% or 0.064.
To Learn more about scientist, Click this!
brainly.com/question/31962791
#SPJ11
A massive uniform string of a mass m and length hangs from the ceiling. Find the speedof a transverse wave along the string as a function of the height ℎ from the ceiling.
Assume uniform vertical gravity with the acceleration .
Let us consider a massive uniform string of a mass m and length L hanging from the ceiling. We need to determine the speed of a transverse wave along the string as a function of the height h from the ceiling, assuming uniform vertical gravity with the acceleration g.
The tension in the string is given by:T = mg (at the bottom of the string)As we move up to a height h, the tension in the string is reduced by the weight of the string below the point, that is:T' = m(g - h/L g)The mass of the string below the point is:ml = m(L - h)
Therefore:T' = m(g - h/L g) = m(Lg/L - hg/L) = mLg/L - mh/L
The speed of the transverse wave is given by:v = √(T' / μ)
where μ is the mass per unit length of the string and can be given as:μ = m / LThus:v = √((mLg/L - mh/L) / (m / L)) = √(gL - h)
Therefore, the speed of a transverse wave along the string as a function of the height h from the ceiling, assuming uniform vertical gravity with acceleration g is given by:v = √(gL - h)
To know more about vertical gravity visit:
https://brainly.com/question/33165023
#SPJ11
Two point charges are stationary and separated by a distance r. which one of the following pairs of charges would result in the largest repulsive force?
The largest repulsive force is when the charges are equal and have the same magnitude, given that the charges are stationary and separated by a distance r.
Coulomb's law states that the electrical force between two charged objects is directly proportional to the product of the quantity of charge on the objects and inversely proportional to the distance between them. The formula for
Coulomb's Law is: F = k(q1q2 / r^2)where F is the force between the charges, q1, and q2 are the magnitudes of the charges, r is the distance between the charges, and k is Coulomb's constant. Coulomb's constant, k, is equal to 9 x 10^9 Nm^2/C^2.
To calculate the force, we have to multiply Coulomb's constant, k, by the product of the charges, q1 and q2, and divide the result by the square of the distance between the charges, r^2.
to know more about repulsive force here:
brainly.com/question/9099726
#SPJ11
A. If an immersed object displaces 8 N of fluid, what is the buoyant force on the block? EXPLAIN.
B. How should you place a screw on a table such that it exerts the smallest pressure against it?. EXPLAIN WHY.
C. An object with a volume of 100cm^3 is submerged in a swimming pool. What is the volume of water displaced?. Why?.
D. You apply a flame to 1 L of water for a certain time and its temperature rises by 2°C. If you apply the same flame for the same time to 2L of water, by how much does its temperature decrease? . Why?
The buoyant force on an object submerged in a fluid is equal to the weight of the fluid displaced by the object.
A. In this case, if the immersed object displaces 8 N of fluid, then the buoyant force on the block is also 8 N. This is known as Archimedes' principle, which states that the buoyant force experienced by an object in a fluid is equal to the weight of the fluid displaced by the object.
B. To exert the smallest pressure against a table, you should place the screw in a way that maximizes the surface area of contact between the screw and the table. By spreading the force over a larger area, the pressure exerted by the screw on the table is reduced. This is based on the equation for pressure, which is equal to force divided by area (P = F/A). Therefore, by increasing the contact area (denominator), the pressure decreases.
C. When an object with a volume of 100 cm³ is submerged in a swimming pool, the volume of water displaced will also be 100 cm³. This is because according to Archimedes' principle, the volume of fluid displaced by an object is equal to the volume of the object itself. So, when the object is submerged, it displaces an amount of water equal to its own volume.
D. When you apply a flame to 1 L of water for a certain time and its temperature rises by 2°C, if you apply the same flame for the same time to 2 L of water, its temperature increase will be the same, 2°C. This is because the change in temperature depends on the amount of heat energy transferred to the water, which is determined by the flame's heat output and the time of exposure. The volume of water being heated does not affect the change in temperature, as long as the same amount of heat energy is transferred to both volumes of water.
For more details regarding buoyant force, visit:
https://brainly.com/question/20165763
#SPJ4
In the series configuration which combination would deliver the most power to the resistor? (large C-large L,small C-small L, large C-small L, small L large C) In the Parallel configuration which combination would deliver the most power to the resistor? (large C-large L,small C-small L, large C-small L, small L large C)
The question asks about the combinations that would deliver the most power to a resistor in series and parallel configurations, specifically considering the sizes of capacitors (C) and inductors (L).
In a series configuration, the combination that would deliver the most power to the resistor is the one with a large capacitor (C) and a small inductor (L). This is because in a series circuit, the power delivered to the resistor is determined by the overall impedance of the circuit, which is influenced by the individual reactances of the components. A large capacitor has a lower reactance (Xc) and contributes less to the overall impedance, while a small inductor has a higher reactance (XL) and contributes more to the overall impedance. Thus, by having a large capacitor and a small inductor, the overall impedance is minimized, allowing more power to be delivered to the resistor.
In a parallel configuration, the combination that would deliver the most power to the resistor is the one with a large inductor (L) and a small capacitor (C). In a parallel circuit, the power delivered to the resistor is determined by the voltage across the resistor and the current flowing through it. The impedance of the circuit is determined by the combination of the individual reactances of the components. A large inductor has a higher reactance (XL) and contributes more to the overall impedance, while a small capacitor has a lower reactance (Xc) and contributes less to the overall impedance. By having a large inductor and a small capacitor, the overall impedance is maximized, allowing more current to flow through the resistor and consequently delivering more power to it.
Learn more about Resistor:
https://brainly.com/question/32613410
#SPJ11
What is escape velocity from the moon if the spacecraft must has a speed of 3000.0 m/s at infinity? At what altitude should a geosynchronous satellite be placed? A geosynchronous orbit means the satellite stays above the same point on earth...so what is its orbital period?
The escape velocity from the Moon is 2380.0 m/s, while a geosynchronous satellite should be placed around 35,786 km above Earth's surface with a 24-hour orbital period.
Escape velocity from the Moon: 2380.0 m/s
To calculate the escape velocity from the moon, we can use the formula:
v_escape = sqrt(2 * G * M / r)
where:
v_escape is the escape velocity,
G is the gravitational constant (6.67430 × 10^-11 m^3 kg^-1 s^-2),
M is the mass of the moon (7.34767 × 10^22 kg),
and r is the radius of the moon (1.7371 × 10^6 m).
Substituting the given values into the formula, we have:
v_escape = sqrt(2 * 6.67430 × 10^-11 * 7.34767 × 10^22 / 1.7371 × 10^6)
Calculating this expression gives us:
v_escape ≈ 2380.9 m/s
Geosynchronous satellite altitude: Approximately 35,786 km above Earth's surface
Geosynchronous orbital period: 24 hours
Escape velocity from the Moon: To escape the Moon's gravitational pull, a spacecraft must reach a speed of 2380.0 m/s (approximately) to achieve escape velocity.
Geosynchronous satellite altitude: A geosynchronous satellite orbits Earth at an altitude of approximately 35,786 km (22,236 miles) above the Earth's surface.
At this altitude, the satellite's orbital period matches the Earth's rotation period, which is about 24 hours. This allows the satellite to remain above the same point on Earth, as it completes one orbit in sync with Earth's rotation.
Understanding these values is crucial for space exploration and satellite communication, as they determine the necessary speeds and altitudes for spacecraft and satellites to accomplish specific missions.
To learn more about geosynchronous satellite
Click here brainly.com/question/31183304
#SPJ11
Considering the following graph of centripetal force and velocity, what is the radius used during the centripetal force experiment if the mass subjected in the experiment was 15 g.
Given that the mass subjected in the experiment was 15 g, the radius can be found by calculating the slope of the graph using the equation for centripetal force.
The graph of centripetal force and velocity shows the relationship between these two variables. In the experiment, a mass of 15 g was subjected to the centripetal force. To find the radius, we need to use the equation for centripetal force:
[tex]F=\frac{mv^{2} }{r}[/tex]
where F is the centripetal force, m is the mass, v is the velocity, and r is the radius.
By rearranging the equation, we can solve for the radius:
[tex]r=\frac{mv^{2} }{F}[/tex]
Given that the mass is 15 g, we can convert it to kilograms (kg) by dividing by 1000.
We can then substitute the values of the mass, velocity, and centripetal force from the graph into the equation to calculate the radius.
The resulting value will give us the radius used during the centripetal force experiment.
Learn more about velocity here:
https://brainly.com/question/30559316
#SPJ11
A 110 kg man lying on a surface of negligible friction shoves a 155 g stone away from him, giving it a speed of 17.0 m/s. What speed does the man acquire as a result?
A 110 kg man lying on a surface of negligible friction shoves a 155 g stone away from him, giving it a speed of 17.0 m/s then the man's speed remains zero.
We have to determine the speed that the man acquires as a result when he shoves the 155 g stone away from him. Since there is no external force acting on the system, the momentum will be conserved. So, before the man shoves the stone, the momentum of the system will be:
m1v1 = (m1 + m2)v,
where v is the velocity of the man and m1 and m2 are the masses of the man and stone respectively. After shoving the stone, the system momentum becomes:(m1)(v1) = (m1 + m2)v where v is the final velocity of the system. Since momentum is conserved:m1v1 = (m1 + m2)v Hence, the speed that the man acquires as a result when he shoves the 155 g stone away from him is given by v = (m1v1) / (m1 + m2)= (110 kg)(0 m/s) / (110 kg + 0.155 kg)= 0 m/s
Therefore, the man's speed remains zero.
To learn more about friction visit
https://brainly.com/question/28356847
#SPJ11
In an RC series circuit, ε = 12.0 V, R = 1.49 MQ, and C= 1.64 F. (a) Calculate the time constant. (b) Find the maximum charge that will appear on the capacitor during charging. (c) How long does it take for the charge to build up to 11.5C? (a) Number i Units (b) Number i Units (c) Number i Units
Therefore, it takes approximately 1.218 × 10⁶ seconds for the charge to build up to 11.5 C.
To calculate the time constant in an RC series circuit, you can use the formula:
τ = R * C
ε = 12.0 V
R = 1.49 MQ (megaohm)
C = 1.64 F (farad)
(a) Calculate the time constant:
τ = R * C
= 1.49 MQ * 1.64 F
τ = (1.49 × 10⁶ Ω) * (1.64 C/V)
= 2.4436 × 10⁶ s (seconds)
Therefore, the time constant is approximately 2.4436 × 10⁶ seconds.
(b) To find the maximum charge that will appear on the capacitor during charging, you can use the formula:
Q = C * ε
= 1.64 F * 12.0 V
= 19.68 C (coulombs)
Therefore, the maximum charge that will appear on the capacitor during charging is approximately 19.68 coulombs.
(c) To calculate the time it takes for the charge to build up to 11.5 C, you can use the formula:
t = -τ * ln(1 - Q/Q_max)
t = - (2.4436 × 10⁶s) * ln(1 - 11.5 C / 19.68 C)
t ≈ - (2.4436 ×10⁶ s) * ln(0.4157)
t ≈ 1.218 × 10^6 s (seconds)
Learn more about series circuit here : brainly.com/question/14997346
#SPJ11
Given the operator a = d^2/dx^2 - 4x^2 and the function f(x) = e^(-x2/2) = evaluate â f(x)
The expression for â f(x) is (-2x^2) e^(-x^2/2).
To evaluate the operator â acting on the function f(x), we need to apply the operator a to the function f(x) and simplify the expression. Let's calculate it step by step:
Start with the function f(x):
f(x) = e^(-x^2/2).
Apply the operator a = d^2/dx^2 - 4x^2 to the function f(x):
â f(x) = (d^2/dx^2 - 4x^2) f(x).
Calculate the second derivative of f(x):
f''(x) = d^2/dx^2 (e^(-x^2/2)).
To find the second derivative, we can differentiate the function twice using the chain rule:
f''(x) = (d/dx)(-x e^(-x^2/2)).
Applying the product rule, we have:
f''(x) = -e^(-x^2/2) + x^2 e^(-x^2/2).
Now, substitute the calculated second derivative into the expression for â f(x):
â f(x) = f''(x) - 4x^2 f(x).
â f(x) = (-e^(-x^2/2) + x^2 e^(-x^2/2)) - 4x^2 e^(-x^2/2).
Simplify the expression:
â f(x) = -e^(-x^2/2) + x^2 e^(-x^2/2) - 4x^2 e^(-x^2/2).
â f(x) = (-1 + x^2 - 4x^2) e^(-x^2/2).
â f(x) = (x^2 - 3x^2) e^(-x^2/2).
â f(x) = (-2x^2) e^(-x^2/2).
Therefore, the expression for â f(x) is (-2x^2) e^(-x^2/2).
To learn more about derivative
https://brainly.com/question/23819325
#SPJ11
What is the net change in energy of a system over a period of 1.5 hours if the system has a power output of 140W? O A. 70.0 kJ O B. 756.0 kJ C. 93.3 kJ O D. 1.6 kJ
The net change in energy of the system over a period of 1.5 hours, with a power output of 140W, is 756.0 kJ. Option B is correct.
To determine the net change in energy of a system over a period of time, we need to calculate the energy using the formula:
Energy = Power × Time
Power output = 140 W
Time = 1.5 hours
However, we need to convert the time from hours to seconds to be consistent with the unit of power (Watt).
1.5 hours = 1.5 × 60 × 60 seconds
= 5400 seconds
Now we can calculate the energy:
Energy = Power × Time
Energy = 140 W × 5400 s
Energy = 756,000 J
Converting the energy from joules (J) to kilojoules (kJ):
756,000 J = 756 kJ
The correct answer is option B.
Learn more about energy -
brainly.com/question/13881533
#SPJ11
A lamp located 3 m directly above a point P on the floor of a
room produces at P an illuminance of 100 lm/m2. (a) What is the
luminous intensity of the lamp? (b) What is the illuminance
produced at an
A lamp located 3 m directly above a point P on the floor of a room produces at P an illuminance of 100 lm/[tex]m^2[/tex], the illuminance at the point 1 m distant from point P is 56.25 lm/[tex]m^2[/tex].
We can utilise the inverse square law for illuminance to address this problem, which states that the illuminance at a point is inversely proportional to the square of the distance from the light source.
(a) To determine the lamp's luminous intensity, we must first compute the total luminous flux emitted by the lamp.
Lumens (lm) are used to measure luminous flux. Given the illuminance at point P, we may apply the formula:
Illuminance = Luminous Flux / Area
Luminous Flux = Illuminance * Area
Area = 4π[tex]r^2[/tex] = 4π[tex](3)^2[/tex] = 36π
Luminous Flux = 100 * 36π = 3600π lm
Luminous Intensity = Luminous Flux / Solid Angle = 3600π lm / 4π sr = 900 lm/sr
Therefore, the luminous intensity of the lamp is 900 lumens per steradian.
b. To find the illuminance at a point 1 m distant from point P:
Illuminance = Illuminance at point P * (Distance at point P / Distance at new point)²
= 100 * [tex](3 / 4)^2[/tex]
= 100 * (9/16)
= 56.25 [tex]lm/m^2[/tex]
Therefore, the illuminance at the point 1 m distant from point P is 56.25 [tex]lm/m^2[/tex]
For more details regarding illuminance, visit:
https://brainly.com/question/29156148
#SPJ4
Your question seems incomplete, the probable complete question is:
A lamp located 3 m directly above a point P on the floor of a room produces at Pan illuminance of 100 lm/m2. (a) What is the luminous intensity of the lamp? (b) What is the illuminance produced at another point on the floor, 1 m distant from P.
a) I = (100 lm/m2) × (3 m)2I = 900 lm
b) Illuminance produced at a distance of 5 m from the lamp is 36 lm/m2.
(a) The luminous intensity of the lamp is given byI = E × d2 where E is the illuminance, d is the distance from the lamp, and I is the luminous intensity. Hence,I = (100 lm/m2) × (3 m)2I = 900 lm
(b) Suppose we move to a distance of 5 m from the lamp. The illuminance produced at this distance will be
E = I/d2where d = 5 m and I is the luminous intensity of the lamp. Substituting the values, E = (900 lm)/(5 m)2E = 36 lm/m2
Therefore, the illuminance produced at a distance of 5 m from the lamp is 36 lm/m2. This can be obtained by using the formula E = I/d2, where E is the illuminance, d is the distance from the lamp, and I is the luminous intensity. Luminous intensity of the lamp is 900 lm.
Learn more about luminous intensity
brainly.com/question/32005476
#SPJ11
In a mass spectrometer, a singly charged ion having a particular velocity is selected by using a magnetic filed of 110 mt perpendicular to an electric field of 3 kV/m. The same magnetic field is used to deflect the ion in a circular path with a radius of 85 mm. What is the mass of the ion?
The mass of the ion is approximately 1.68 x [tex]10^-^4[/tex] kg.
In a mass spectrometer, an equation linking the momentum, the magnetic field, and the radius of the circular path can be used to calculate the mass of the ion.
The equation is given by:
mv² / r = qB
Where:
m is the mass of the ion
v is the velocity of the ion
r is the radius of the circular path
q is the charge of the ion
B is the magnetic field
So, the values of these are given which are as follows:
B = 110 mT (or 0.11 T)
r = 85 mm (or 0.085 m)
q = 1 (since the ion is singly charged)
To solve for m, we need to find v and plug the known values into the equation. We can use the equation connecting electric field, velocity, and charge to determine v:
qE = mv²
v = √(qE / m)
So,
v = √((1)(3000 V/m) / m)
To solve for m, we can now plug the values of v, B, and r into the first equation as follows:
(m)(√((1)(3000 V/m) / m)²) / (0.085 m) = (1)(0.11 T)
m = ((0.085 m)(0.11 T)) / √(3000 V/m)
m ≈ 1.68 x [tex]10^-^4[/tex]kg
Therefore, the mass of the ion is approximately 1.68 x [tex]10^-^4[/tex] kg.
Learn more about mass spectrometer, here:
https://brainly.com/question/4780013
#SPJ4
The mass of the ion is 3.98 × 10⁻²⁶ kg.
In a mass spectrometer, the mass of the ion can be calculated using the following expression:
Magnetic field strength (B) x radius (r) x charge (q) / velocity (v) = mass (m)
Given that a singly charged ion having a particular velocity is selected using a magnetic field of 110 mt perpendicular to an electric field of 3 kV/m.
The same magnetic field is used to deflect the ion in a circular path with a radius of 85 mm.
Given,
Magnetic field strength, B = 110 mt
Perpendicular to an electric field, E = 3 kV/m
Radius of the circular path, r = 85 mm = 0.085 m
Charge, q = +1 (singly charged ion)
Velocity, v = unknown
Mass, m = unknown
We can rewrite the formula as m = Bqr / v
Let's calculate the velocity, v:
Force on a charge, F = qE
where E is the electric field
Strength of magnetic field, B = F/v
where F is the force on the charge q = 1.6 × 10⁻¹⁹ C, the charge on the ion.
Here, we have to convert E to SI units,
E = 3 × 10³ V/m
= 3 × 10³ N/C
Using the formula B = F/v, we get
B = (qE)/v
Hence, v = qE/B
= (1.6 × 10⁻¹⁹ C × 3 × 10³ N/C)/(110 × 10⁻⁴ T)
= 4.36 × 10⁶ m/s
Now, substituting all the known values in the formula:
m = Bqr / vm
= 110 × 10⁻⁴ T × 1 × 1.6 × 10⁻¹⁹ C × 0.085 m / (4.36 × 10⁶ m/s)
= 3.98 × 10⁻²⁶ kg
Learn more about spectrometer from the given link
https://brainly.com/question/24864511
#SPJ11
Consider two electrons in an atomic P state in the absence of any external field. What are the allowed values of L,S and J for the combined two electron system and write their overall state.
The allowed values of L, S, and J for the combined two-electron system in the absence of any external field are L = 1, S = 1/2 or S = -1/2, and J = 3/2 or J = 1/2. The overall state of the system can be represented as |1, 1/2; 3/2, MJ⟩ or |1, 1/2; 1/2, MJ⟩.
In an atomic P state, the orbital angular momentum quantum number (L) can have the value of 1. However, the spin quantum number (S) for electrons can only be either +1/2 or -1/2, as electrons are fermions with spin 1/2. The total angular momentum quantum number (J) is the vector sum of L and S, so the possible values for J can be the sum or difference of 1 and 1/2.
For the combined two-electron system in the absence of any external field, the possible values of L, S, and J are:
L = 1 (since the atomic P state has L = 1)
S = 1/2 or S = -1/2 (as the spin quantum number for electrons is ±1/2)
J = L + S or J = |L - S|
Therefore, the allowed values of L, S, and J for the combined two-electron system are:
L = 1
S = 1/2 or S = -1/2
J = 3/2 or J = 1/2
The overall state of the system is represented using spectroscopic notation as |L, S; J, MJ⟩, where MJ represents the projection of the total angular momentum onto a specific axis.
Therefore, the allowed values of L, S, and J for the combined two-electron system in the absence of any external field are L = 1, S = 1/2 or S = -1/2, and J = 3/2 or J = 1/2. The overall state of the system can be represented as |1, 1/2; 3/2, MJ⟩ or |1, 1/2; 1/2, MJ⟩.
Learn more about electron at: https://brainly.com/question/860094
#SPJ11
< Question 11 of 16 > You have a string with a mass of 0.0137 kg. You stretch the string with a force of 8.51 N, giving it a length of 1.87 m. Then, you vibrate the string transversely at precisely the frequency that corresponds to its fourth normal mode; that is, at its fourth harmonic. What is the wavelength 24 of the standing wave you create in the string? What is the frequency f4? 24 m f4= Hz =
The wavelength of the standing wave created in the string is 0.124 meters (m), and the frequency of the fourth harmonic, denoted as [tex]f_4[/tex], is 64.52 Hz.
The speed of a wave on a string is given by the equation [tex]v = \sqrt{(T/\mu)}[/tex], where v represents the velocity of the wave, T is the tension in the string, and μ is the linear mass density of the string. Linear mass density (μ) is calculated as μ = m/L, where m is the mass of the string and L is the length of the string.
Using the given values, we can calculate the linear mass density:
μ = 0.0137 kg / 1.87 m = 0.00732 kg/m.
Next, we need to determine the speed of the wave. The tension in the string (T) is provided as 8.51 N. Plugging in the values,
we have v = √(8.51 N / 0.00732 kg/m) ≈ 42.12 m/s.
For a standing wave, the relationship between wavelength (λ), frequency (f), and velocity (v) is given by the formula λ = v/f. In this case, we are interested in the fourth harmonic, which means the frequency is four times the fundamental frequency.
Since the fundamental frequency (f1) is the frequency of the first harmonic, we can find it by dividing the velocity (v) by the wavelength (λ1) of the first harmonic. However, the wavelength of the first harmonic corresponds to the length of the string,
so [tex]\lambda_ 1 = L = 1.87 m.[/tex]
Now we can calculate the wavelength of the fourth harmonic (λ4). Since the fourth harmonic is four times the fundamental frequency,
we have λ4 = λ1/4 = 1.87 m / 4 ≈ 0.4675 m.
Finally, we can calculate the frequency of the fourth harmonic (f4) using the equation [tex]f_4[/tex]= v/λ4 = 42.12 m/s / 0.4675 m ≈ 64.52 Hz.
Therefore, the wavelength of the standing wave is approximately 0.124 m, and the frequency of the fourth harmonic is approximately 64.52 Hz.
To learn more about frequency here brainly.com/question/14316711
#SPJ11
Show all work please, thank you!
An L-C circuit has an inductance of 0.350 H and a capacitance of 0.230 nF. During the current oscillations, the maximum current in the inductor is 2.00 A .
A) What is the maximum energy Emax stored in the capacitor at any time during the current oscillations? Express your answer in joules.
Emax=?
B) How many times per second does the capacitor contain the amount of energy found in part A? Express your answer in times per second.
The maximum energy stored in the capacitor (Emax) is 0.35 J. The capacitor contains the amount of energy found in part A approximately 17739 times per second.
To calculate the maximum energy stored in the capacitor (Emax), we can use the formula:
Emax = (1/2) * C * [tex]V^2[/tex]
where C is the capacitance and V is the maximum voltage across the capacitor.
Given:
Inductance (L) = 0.350 H
Capacitance (C) = 0.230 nF = 0.230 * [tex]10^{(-9)[/tex] F
Maximum current (I) = 2.00 A
To find the maximum voltage (V), we can use the relationship between the inductor current (I), inductance (L), and capacitor voltage (V) in an L-C circuit:
I = √(2 * Emax / L) [equation 1]
We can rearrange equation 1 to solve for Emax:
Emax = ([tex]I^2[/tex] * L) / 2 [equation 2]
Substituting the given values into equation 2:
Emax = ([tex]2.00^2[/tex] * 0.350) / 2 = 0.35 J
Therefore, the maximum energy stored in the capacitor (Emax) is 0.35 J.
To calculate the number of times per second (N) that the capacitor contains the amount of energy found in part A, we can use the formula:
N = 1 / (2π * √(LC)) [equation 3]
Substituting the given values into equation 3:
N = 1 / (2π * √(0.350 * 0.230 * 10^(-9))) ≈ 17739 [tex]s^{(-1)[/tex]
Therefore, the capacitor contains the amount of energy found in part A approximately 17739 times per second.
Know more about capacitor:
https://brainly.com/question/32648063
#SPJ4
A high-performance dragster with a mass of
m = 1271 kg can accelerate at a rate of a = 25
m/s2.
If the track is L=400 m long, what is the numerical
value of the dragster’s final speed, vf in
m/s?
The dragster's final speed is approximately 141.42 m/s. To find the final speed of a high-performance dragster, we can use the given mass, acceleration, and track length.
By applying the kinematic equation relating distance, initial speed, final speed, and acceleration, we can calculate the numerical value of the dragster's final speed.
Using the kinematic equation, we have the formula: vf^2 = vi^2 + 2ad, where vf is the final speed, vi is the initial speed (which is assumed to be 0 since the dragster starts from rest), a is the acceleration, and d is the distance traveled.
Substituting the given values, we have vf^2 = 0 + 2 * 25 * 400.
Simplifying, we find vf^2 = 20000, and taking the square root of both sides, vf = sqrt(20000).
Finally, calculating the square root, we get the numerical value of the dragster's final speed as vf ≈ 141.42 m/s.
Therefore, the dragster's final speed is approximately 141.42 m/s.
Learn more about kinematic equation here:
brainly.com/question/28712225
#SPJ11
A moving particlo is subject conservative forces only. when its kinetic energy decreases by 103, what happens to its mechanical energy?
When the kinetic energy of a moving particle decreases by 103 units due to the effect of conservative forces, then its mechanical energy will also decrease by 103 units.
Conservative forces are defined as forces that are the gradient of a scalar potential function. As a result, these forces have a unique property: they can convert mechanical energy between potential and kinetic energy and vice versa. When a particle is subjected to only conservative forces, it experiences a mechanical force that is conservative. Thus, the total mechanical energy of the particle remains constant as it moves through space.
Considering the law of conservation of energy, we have: Initial mechanical energy of the particle, Ei = Kinetic energy of the particle, Ki Final mechanical energy of the particle, Ef = Potential energy of the particle, Ui
When the kinetic energy of the moving particle decreases by 103 units, the mechanical energy of the particle also decreases by 103 units. Therefore, the new value of mechanical energy is: Ef = Ei - ΔK
Ef = Ki - ΔK
Therefore, the particle's mechanical energy will be reduced by the same amount (103 units) as its kinetic energy. Therefore, when a moving particle is subjected to conservative forces only and its kinetic energy decreases by 103 units, its mechanical energy will also decrease by 103 units.
To know more about kinetic energy, refer
https://brainly.com/question/8101588
#SPJ11
An RL circuit is composed of a 12 V battery, a 6.0 H inductor and a 0.050 Ohm resistor.
The switch is closed at t = 0
An RL circuit is composed of a 12 V battery, a 6.0 H inductor and a 0.050 Ohm resistor.
The switch is closed at t = 0
These are the options:
The time constant is 1.2 minutes and after the switch has been closed a long time the voltage across the inductor is zero.
The time constant is 2.0 minutes and after the switch has been closed a long time the voltage across the inductor is 12 V.
The time constant is 1.2 minutes and after the switch has been closed a long time the voltage across the inductor is 12 V.
The time constant is 2.0 minutes an
The correct option is : The time constant is 2.0 minutes, and after the switch has been closed for a long time, the voltage across the inductor is zero.
To determine the time constant and the voltage across the inductor after a long time, we can use the formula for the time constant of an RL circuit:
τ = L/R
where τ is the time constant, L is the inductance, and R is the resistance.
In this case, the inductance (L) is given as 6.0 H and the resistance (R) is given as 0.050 Ω.
Using the formula, we can calculate the time constant:
τ = 6.0 H / 0.050 Ω = 120 seconds
Since the time constant is given in seconds, we need to convert it to minutes:
τ = 120 seconds * (1 minute / 60 seconds) = 2.0 minutes
So, the correct option is:
The time constant is 2.0 minutes, and after the switch has been closed for a long time, the voltage across the inductor is zero.
Let's learn more about inductance:
https://brainly.com/question/7138348
#SPJ11
A parallel-plate capacitor is made from two aluminum-foil sheets, each 3.40 cm wide and 11.0 m long. Between the sheets is a mica strip of the same width and length that is 0.0225 mm
thick.
What is the maximum charge that can be stored in this capacitor?
We can calculate the capacitance of the capacitor:
C = ε₀(A/d) = (8.85 x [tex]10^{-12}[/tex] F/m) × (0.374 m² / 0.0000225 m)
≈ 1.467 x [tex]10^{-9}[/tex] F.
To find the maximum charge that can be stored in the capacitor, we need to use the formula for the capacitance of a parallel-plate capacitor:
C = ε₀(A/d)
Where:
- C is the capacitance.
- ε₀ is the vacuum permittivity, approximately equal to 8.85 x 10^(-12) F/m.
- A is the area of the plates.
- d is the separation between the plates.
Given:
- The width of each aluminum-foil sheet is 3.40 cm = 0.034 m.
- The length of each aluminum-foil sheet is 11.0 m.
- The mica strip has the same width and length.
- The thickness of the mica strip is 0.0225 mm = 0.0000225 m.
First, let's calculate the area of each plate:
A = width × length
= 0.034 m × 11.0 m
= 0.374 m²
Determine the effective separation between the plates.
d = thickness of mica + thickness of air gap
= 0.0000225 m + 0 (since air gap is negligible)
= 0.0000225 m
Now, we can calculate the capacitance of the capacitor:
C = ε₀(A/d) = (8.85 x [tex]10^{-12}[/tex] F/m) × (0.374 m² / 0.0000225 m)
≈ 1.467 x[tex]10^{-9}[/tex] F
Finally, the maximum charge that can be stored in the capacitor is given by the equation:
Q = C × V
Learn more about Capacitance, here:
https://brainly.com/question/31871398
#SPJ4
The maximum charge that can be stored in this capacitor is 6.46 x 10^-5 C.
The maximum charge that can be stored in the parallel-plate capacitor is 6.46 x 10^-5 C. Capacitance is the ability of an object to store an electric charge, and it is determined by the size, shape, and distance between the plates. Here, a parallel-plate capacitor is made from two aluminum-foil sheets, each 3.40 cm wide and 11.0 m long. Between the sheets is a mica strip of the same width and length that is 0.0225 mm thick.
The capacitance of a parallel plate capacitor is given by;C=εA/d,where ε is the permittivity of free space, A is the area of each plate, and d is the distance between the plates.ε = 8.85 x 10^-12 F/m is the permittivity of free space A = (3.40 x 10^-2 m) x (11.0 m) = 0.374 m^2 is the area of each plated = 0.0225 x 10^-3 m is the distance between the plates
Therefore, the capacitance is;C=εA/d = 8.85 x 10^-12 x 0.374/0.0225 x 10^-3 = 1.47 x 10^-8 FThe maximum charge that can be stored in a capacitor is given by;Q=CV, where Q is the maximum charge, C is the capacitance, and V is the voltage applied across the capacitor.
To find the maximum charge, we can use the voltage equation,V=Ed/d = εE/d,where E is the electric field between the plates and d is the distance between the plates. Since the electric field is uniform, we have;E=V/d = εV/d^2Substituting the expression for the electric field into the capacitance equation, we have;C=εA/d = εA/V/ESimplifying for the voltage, we have;V=Q/CSubstituting the expression for the electric field into the voltage equation, we have;Q = CV = εAV/dThe maximum charge that can be stored in this capacitor is thus;Q = εAV/d = 8.85 x 10^-12 x 0.374/0.0225 x 10^-3 = 6.46 x 10^-5 C
Learn more about capacitor
https://brainly.com/question/31627158
#SPJ11
A 6,000 kg jet fighter flying at 150 m/s can produce 100,000 N of thrust force. Air drag acting on the jet depends on the speed and at this speed is approximately 20,000 N.
Assume that the jet is in the air flying at an angle of 30 degrees with respect to the horizontal. The maximum thrust force from the engines of 100,000 N propels the jet upward. At the same time, a drag force of 20,000 N directed horizontally opposes the motion of the jet. Note: the drag force is directed only horizontally (not at an angle).
a) Using the accompanying space on the right, draw and label a free body diagram with all of the forces acting on the jet.
Free Body Diagram
b) What would be the horizontal acceleration of the jet assuming the air drag does not increase as the jet flies faster?
c) What would be the acceleration of the jet in the vertical direction?
d) In order that the jet climbs up at a constant speed, should the pilot increase or decrease the flying angle with respect to the horizontal? Please explain and justify your answer using physics reasoning or/and calculations.
For the provided data, (a) a free body diagram is drawn below ; (b) the horizontal acceleration of the jet is 13.33 m/s2 ; (c) The acceleration of the jet in the vertical direction 6.867 m/s2 ; (d) to maintain a constant speed, the pilot should decrease the flying angle with respect to the horizontal so that the upward component of the thrust force is greater than the downward component of the weight force.
a) The free-body diagram for a 6,000 kg jet fighter flying at 150 m/s and making a 30-degree angle with respect to the horizontal would be as follows :
^
|
N |
↑ |
| |
| |
| T | D
----|------|---->
|
|
|
|
W|
The weight force W, acting vertically downwards on the jet fighter is given by : W = mg = 6000 × 9.8 = 58800 N
The thrust force T, acting upwards and parallel to the flight path is given by : T = 100000 N
The drag force D, acting horizontally against the direction of motion is given by : D = 20000 N
b) The horizontal force acting on the fighter jet can be calculated as : R = T - D
where R is the horizontal force acting on the fighter jet.
R = 100000 - 20000 = 80000 N
The horizontal acceleration of the jet is given by a = R/m
where m is the mass of the jet , a = 80000/6000 = 13.33 m/s2
c) The vertical force acting on the jet can be calculated as : F = T - W
where F is the vertical force acting on the jet.
F = 100000 - 58800 = 41200 N
The acceleration of the jet in the vertical direction is given by a = F/m
where m is the mass of the jet ; a = 41200/6000 = 6.867 m/s2
d) In order for the jet to climb up at a constant speed, the pilot should decrease the flying angle with respect to the horizontal. This is because the weight of the jet fighter acts vertically downwards and opposes the upward thrust force of the engines.
The vertical component of the thrust force can be calculated as : Fv = Tsinθ
where θ is the angle of the flight path with respect to the horizontal.
Fv = 100000sin(30°) = 50000 N
The vertical component of the weight force can be calculated as : Wv = Wcosθ
where θ is the angle of the flight path with respect to the horizontal.
Wv = 58800cos(30°) = 50789 N
The net upward force acting on the jet fighter is given by : Fnet = Fv - Wv
where Fnet is the net upward force acting on the jet fighter.
Fnet = 50000 - 50789 = -789 N
Since the net force acting on the fighter jet is negative, it is losing altitude and the speed of descent will increase unless the angle of the flight path is adjusted. To maintain a constant speed, the pilot should decrease the flying angle with respect to the horizontal so that the upward component of the thrust force is greater than the downward component of the weight force.
Thus, for the provided data, (a) a free body diagram is drawn below ; (b) the horizontal acceleration of the jet is 13.33 m/s2 ; (c) The acceleration of the jet in the vertical direction 6.867 m/s2 ; (d) to maintain a constant speed, the pilot should decrease the flying angle with respect to the horizontal so that the upward component of the thrust force is greater than the downward component of the weight force.
To learn more about acceleration :
https://brainly.com/question/25876659
#SPJ11
A beam of particles carrying a charge of magnitude that is 8 times the charge of electron (1.602×10-19 C) is traveling at 1.5 km/s when it enters a uniform magnetic field at point A, traveling perpendicular to the field of 3.53×10-3 T. The beam exits the magnetic field at point B, leaving the field in a direction perpendicular to its original direction. If the mass of the particle is 12 times the mass of proton (1.673×10-27 kg), determine the sign of the charged particle and the distance travelled by the particle from point A to B.
The distance travelled by the particle from point A to B is 4.16 cm. The sign of the charged particle is positive.
Given that the charge of the particle is 8 times the charge of the electron
= 8 × 1.602 × 10^(-19)
= 1.2816 × 10^(-18) C
The magnetic field, B = 3.53 × 10^(-3) T
The velocity, v = 1.5 km/s
= 1.5 × 10^(3) m/s
The mass of the particle, m = 12 times the mass of the proton
= 12 × 1.673 × 10^(-27) kg
= 2.0076 × 10^(-26) kg
Charge of a particle, q = vBmr / q
Here, r is the radius of the circular path followed by the charged particle while travelling in the magnetic field.
Hence, the sign of the charged particle is positive and the distance travelled by the particle from point A to B is 4.16 cm.Step-by-step explanation:
The force acting on a charged particle in a magnetic field is given by the equation,F = qvB
where,F is the magnetic force acting on the charged particleq is the charge of the particlev is the velocity of the particleB is the magnetic field strengthFurther, the force causes the charged particle to move in a circular path. The radius of this circular path is given by the equation,r = mv / qBwhere,r is the radius of the circular pathm is the mass of the particleAfter the particle exits the magnetic field, it moves in a straight line. This means that it will continue to move in a straight line in the direction perpendicular to its original direction of travel.
Thus, the path followed by the particle can be represented as shown below:
Since the particle exits the magnetic field in a direction perpendicular to its original direction of travel, the radius of the circular path followed by the particle while inside the magnetic field is equal to the distance travelled by the particle inside the magnetic field.
From the equation for the radius of the circular path followed by the charged particle, we have,r = mv / qB
Substituting the values given in the problem,
r = (2.0076 × 10^(-26)) × (1.5 × 10^(3)) / (1.2816 × 10^(-18)) × (3.53 × 10^(-3))[tex](2.0076 × 10^(-26)) × (1.5 × 10^(3)) / (1.2816 × 10^(-18)) × (3.53 × 10^(-3))[/tex]
r = 4.16 × 10^(-2) m
= 4.16 cm
Thus, the distance travelled by the particle from point A to B is 4.16 cm. The sign of the charged particle is positive.
To know more about magnitude visit;
brainly.com/question/31022175
#SPJ11