the molar mass of formic acid CH2O2 = 46.03 g/mol
the number of moles of HCHO2 = 0.0349 g / 46.03 g/mol
n = 7.58 × 10^-4 mol
according to the balanced chemical equation
HCHO2 + NaOH → H2O + NaCHO2
1 mol of formic acid will react with 1 mol of NaOH
so we need 7.58 × 10^-4 mol of NaOH
the molarity = 0.1500M = 7.58 × 10^-4 mol / volume
the volume = 7.58 × 10^-4 mol / 0.1500M
= 5.05 × 10^-3 L = 5.05 ml
Which graph shows the pressure-volume relationship expected for an ideal gas? (This is an illustration of Boyle's law.)
Question 11 options:
A)
Graph B
B)
Graph C
C)
Graph D
D)
Graph A
Answer:
D
Explanation:
The graph of Boyle's law is known as pressure-volume graph or PV curve. It is as follows:
As observed from the graph above, pressure increases with a decrease in volume, and vice versa. Thus, pressure is inversely proportional to volume. Other parameters (temperature and amount of gas) are constant in the graph above.
Volume is on the x-axis and pressure, on the y-axis. The equation of the curve is PV = k, which is the equation of Boyle's law. The curve is hyperbolic in nature having two asymptotes: P = 0 (horizontal) and V = 0 (vertical).
As volume tends to positive infinity, pressure tends to zero, and we get the horizontal asymptote, P = 0.
Horizontal asymptote, P=0
When volume approaches zero, pressure approaches infinity, and it results in the vertical asymptote, V = 0.
The graph which shows the pressure-volume relationship expected for an ideal gas is: C) Graph D.
Boyle's states that when the temperature of an ideal gas is kept constant, the pressure of the gas is inversely proportional to the volume occupied by the gas.
Mathematically, Boyle's law is given by the formula:
[tex]PV = k[/tex]
Where;
P is the pressure of an ideal gas.V is the volume of an ideal gas.For the illustration of Boyle's law using a graph, volume is represented on the x-axis while pressure is represented on the y-axis.
Generally, the graph of Boyle's law is a hyperbolic curve with two asymptotes:
P = 0 (horizontal axis).V = 0 (vertical axis).Find more information: https://brainly.com/question/1437490
what is the volume of 18.9 g of a liquid that has a density of 0.956 g/ml
Which of the atoms below are least likely to violate the octet rule?
Answer:
F i think i pretty sure F!!!!!!!!
In an industrial process ethanol C2H60 burns with O2 to produce heat. Each mole of ethanol produces 8842 joules during the reaction.
C2H5OH (1) + 3 O2(g) 2 CO2(g) + 3 H2O(0) + 8842 Joules
How many Kilojoules are obtained from burning 982.6 g of ethanol?
Answer:
[tex]189kJ[/tex]
Explanation:
Hello!
In this case, since one mole of ethanol release 8,842 J per 1 mole of ethanol, we can write:
[tex]\frac{8,842J}{1molC_2H_6H}[/tex]
Thus, since we need the energy released by 982.6 g of ethanol, we compute the moles in such mass of fuel:
[tex]n=982.6g\frac{1mol}{46.08g} =21.3mol[/tex]
Therefore, the result is:
[tex]\frac{8,842J}{1mol}*21.3mol=188,545J[/tex]
Which in kJ is:
[tex]189kJ[/tex]
Best regards!
The molecular mass of propanoic acid is 75.1 amu . Calculate the molecular mass of methyl ethanoate, an isomer of propanoic acid.
Express your answer with the appropriate units.
Answer:
75.1
Explanation:
The isomers contains the similar and accurate chemical formulas but at the same time the structure of the molecular is different. This represents that the masses of the molecular would be similar
Therefore the molecular mass of methyl ethanoate, i.e. an isomer propanoic acid is 75.1 i.e. equivalent to the molecular mass of the propanoic acid
So, it should be 75.1
As the number of bonds increases, the strength of the bond ________.
Answer:
increases
Explanation:
I need hlep with this question
Answer:
yes its what the other person said
Explanation:
a gas occupies 600.0 ml at 20.00 degrees C and 70.00kPa what will be the pressure at 40.00 degrees C and 150.0mL?
Answer:
P₂ = 299.11 KPa
Explanation:
Given data:
Initial volume = 600 mL
Initial pressure = 70.00 KPa
Initial temperature = 20 °C (20 +273 = 293 K)
Final temperature = 40°C (40+273 = 313 K)
Final volume = 150.0 mL
Final pressure = ?
Formula:
P₁V₁/T₁ = P₂V₂/T₂
P₁ = Initial pressure
V₁ = Initial volume
T₁ = Initial temperature
P₂ = Final pressure
V₂ = Final volume
T₂ = Final temperature
Solution:
P₂ = P₁V₁ T₂/ T₁ V₂
P₂ = 70 KPa × 600 mL × 313 K / 293K ×150 mL
P₂ = 13146000 KPa .mL. K /43950 K.mL
P₂ = 299.11 KPa
The observed cell potential for a voltaic cell is 2.067 V when the temperature is 298 K and the concentration of copper(ll) ions is 1.07 M. What is the concentration of aluminum ions in this cell?
Al(s)|A13+ (aq, ?M)||Cu2+(aq, 1.07M)|Cu(s)
Cu2+(aq) + 2 e- → Cu(s) 0.337 V
Al3+(aq) + 3 e- → Al(s) -1.66 V
Answer:
3.22 * 10^-4 M
Explanation:
The cell reaction equation is;
2Al(s) + 3Cu^2+(aq) ------> 2Al^3+(aq) + 3Cu(s)
E° = 0.337 V - (-1.66 V)
E° = 1.997 V
Given that the cell potential is 2.067 V, from Nernst's equation;
E = E° - 0.0592/n log Q
Substituting values;
2.067 = 1.997 - 0.0592/6 log [Al^3+]^2/[1.07]^3
0.07 = - 0.0592/6 log [Al^3+]^2/[1.07]^3
- 7.07 = log [Al^3+]^2/[1.07]^3
Antilog (- 7.07) = [Al^3+]^2/[1.07] ^3
8.5 * 10^-8 = [Al^3+]^2/[1.07]^3
[Al^3+]^2 = 8.5 * 10^8 * 1.07 ^3
[Al^3+]^2 = 1.04 * 10^-7
[Al^3+] = √1.04 * 10^-7
[Al^3+] = 3.22 * 10^-4 M
HELP IM CONFUSED I GIVE BRAINLIEST
Answer:
I⁻ , Sr²⁺ , K⁺
Explanation:
refer to the periodic table and memorize trends in charges.
What is the final pressure of 1.00 mol of ammonia gas, initially at 1.00 atm, if the volume is:___________.
a. gradually decreased from 78.0 mL to 39.0 mL at constant temperature.
1) 2.00 atm
2) 1.00 atm
3) 0.50 atm
4) Not enough data
b. increased from 43.5 mL to 65.5 mL at constant temperature.
c. decreased by 40% at constant temperature.
Answer:
The correct answer is a = 2 atm, b = 0.66 atm, and c = 1.66 atm.
Explanation:
a. When the temperature is constant, the ideal gas equation, that is, PV = nRT becomes PV = constant, or P1V1 = P2V2
Based on the given information, the pressure of the gas is 1.00 atm, the V1 of the gas is 78 ml, and the V2 of the gas is 39 ml.
Now using the above formula we get,
P2 = (P1V1) / (V2)
P2 = 1 atm * 78 ml/39 ml
P2 = 2 atm.
b) Now the volume V1 is 43.5 ml, and the volume V2 is 65.5 ml at constant temperature, P1 is 1 atm. Now P2 will be,
P2 = (P1V1) / (V2)
P2 = 1 atm * 43.5 ml/65.5 ml
P2 = 0.66 atm
c) In the given case, when the volume is decreased by 40 percent, let us consider that the volume, V1 be 100 ml, and the volume V2 be 60 ml, the P1 is 1 atm, now the P2 will be,
P2 = (P1V1) / (V2)
P2 = 1 atm * 100 ml/60 ml
P2 = 1.66 atm.
Pro
∆G0=-RT in k Known as
Answer:
Gibbs free energy equation
Explanation:
Why is a “spark” of energy required to begin the chemical reaction of burning a fossil fuel? What is another name for this spark of energy?
Answer: a burst
Explanation: a burst of energy could be substatuded for spark of energy
A spark of energy is required to begin the chemical reaction of burning a fossil fuel because; This spark of energy is required to attain the activation energy of the reaction.
Another name for this spark of energy is Ignition.
Definition:
The activation energy of a chemical reaction is the minimum amount of energy required for the commencement of the chemical reaction.
In this case, the spark of energy is required to attain the activation energy of the reaction.
Read more:
https://brainly.com/question/7639475
The third law of thermodynamics states that:_____.
a. the entropy of the universe equals the sum of the entropy of system and that of the surroundings.
b. the entropy of the universe is constant.
c. the entropy is zero at 0 K for a perfect crystal.
d. the entropy of the universe is increasing.
e. the absolute entropy of a substance decreases with increasing temperature.
Answer:
C
Explanation:
The third law of thermodynamics states that at absolute zero temperature, the entropy of a perfect crystal is zero. In other words, as the temperature of a system approaches zero, the entropy also approaches a constant value.
The law only holds true only if the crystal has minimal energy and only exist in one state. The entropy becomes zero as the temperature also becomes zero only for a perfect crystal. Otherwise, the law refuses to hold.
The correct option is, therefore, C.
Need help with this please thanks
Answer: 1. [tex]2H_2+O_2\rightarrow 2H_2O[/tex]
2. [tex]P_4+3O_2\rightarrow 2P_2O_3[/tex]
3. [tex]N_2+3H_2\rightarrow 2NH_3[/tex]
4. [tex]2K+Cl_2\rightarrow 2KCl[/tex]
Explanation:
According to the law of conservation of mass, mass can neither be created nor be destroyed. Thus the mass of products has to be equal to the mass of reactants. The number of atoms of each element has to be same on reactant and product side. Thus chemical equations are balanced.
The given equations are balanced as:
1. [tex]2H_2+O_2\rightarrow 2H_2O[/tex]
2. [tex]P_4+3O_2\rightarrow 2P_2O_3[/tex]
3. [tex]N_2+3H_2\rightarrow 2NH_3[/tex]
4. [tex]2K+Cl_2\rightarrow 2KCl[/tex]
The reaction between calcium carbonate (CaCO3) and HCl produces calcium chloride (CaCl2), carbon dioxide (CO2), and water (H2O).What happens when the concentration of hydrogen chloride (HCl) molecules is doubled in this reaction?
CaCO3 + 2HCl → CaCl2 + CO2 + H2O
Answer:
yes that is right
Explanation:
Answer: what is the answer im on plato
Explanation:
Polonium-214 went through a series of radioactive decays to produce a stable isotope of bismuth-210 choose the correct decay series that would produce bismuth-210
A: Polonium-214 undergoes 2 beta decay and 1 gamma emission
B: Polonium-214 undergoes 1 alpha decay and 2 gamma emission
C: Polonium-214 undergoes 2 alpha decay and 1 beta decay
D: Polonium-214 undergoes 1 alpha decay 1 beta decay and 1 gamma emission.
The correct decay series :
₈₄Po²¹⁴⇒₈₃Bi²¹⁰+₂He⁴+ ₋₁e⁰+ ₀γ⁰
Further explanationRadioactivity is the process of unstable isotopes to stable isotopes by decay, by emitting certain particles,
alpha α particles ₂He⁴ beta β ₋₁e⁰ particles gamma particles ₀γ⁰ positron particles ₁e⁰ neutron ₀n¹Decay's reaction :
₈₄Po²¹⁴⇒₈₃Bi²¹⁰+x+y+z
From this decay reaction can be concluded
mass number decreased by 4
atomic number decreased by 1
Then the most suitable are:
Polonium-214 undergoes 1 alpha decay 1 beta decay and 1 gamma emission.
₈₄Po²¹⁴⇒₈₃Bi²¹⁰+₂He⁴+ ₋₁e⁰+ ₀γ⁰
So that the mass number and atomic number are the same both before and after decay
You weighed out 0.020 g of your crude aspirin product in order to determine the amount of salicylic acid impurity. Following the procedure outlined in the manual, you dissolved the solid and diluted the solution to a final volume of 10.0 mL. If the absorbance of your sample solution was 1.07, what was the percent salicylic acid in your product?
a. 6.4%.
b. 10%.
c. 7.8%.
d. 92%.
e. none of the above.
Answer:
7.8%
Explanation:
Given that:
The initial mass amount of aspirin = 0.020g
The standard molar mass of aspirin = 240 g/mol
Thus, the number of moles = mass/molar mass
= 0.020/240
= 0.0000833 moles
Now, the molarity of aspirin in the solution(diluted) [tex]C_1[/tex] = [tex]\dfrac{8.33 \times 10^{-5}}{0.01}[/tex]
= [tex]= 8.33 \times 10^{-3} \ M[/tex] (provided the volume v = 0.01 L)
The absorbance of the sample solution A =1.07
The path length (b) = 1 cm
From the standard value of salicylic acid, the coefficient (e)= 139.322 /M/cm
Now; according to Beer's law, the concentration of aspirin is:
A = e×b×c
[tex]c = \dfrac{A}{eb}[/tex]
[tex]c = \dfrac{1.07}{139.322 \times 1}[/tex]
c = 0.00768 M
Finally, relating the concentration of the aspirin, the percentage of salicylic acid the product [tex]= \dfrac{0.00833-0.00768}{0.00833} \times 100[/tex]
= 7.8%
Suggest a possible mechanism for the acid catalyzed reaction of a typical ketohexose to give 5-hydroxymethylfurfural.
Answer:
See explanation
Explanation:
Taking the acid catalysed hydrolysis of fructose C6H12O6, the mechanism begins with the protonation of an -OH group as shown.
This is now followed by dehydration and formation of a keto-enol tautomer. The keto form is now dehydrated followed by the protonation of a second -OH group.
A second dehydration followed by deprotonation leads to the formation of 5-hydroxymethylfurfural.
Image credit: SciElo
Can someone help me and explain why they got what they got?
Answer:
24.32 amu
Explanation:
From the question given above, the following data were obtained:
Isotope A (Mg–24):
Mass of A = 24 amu
Abundance (A%) = 79%
Isotope B (Mg–25):
Mass of B = 25 amu
Abundance (B%) = 10%
Isotope C (Mg–26):
Mass of C = 26 amu
Abundance (C%) = 11%
Average atomic mass of Mg =?
Average atomic mass = [(Mass of A × A%)/100] + [(Mass of B × B%)/100] + [(Mass of C × C%)/100]
= [(24 × 79)/100] + [(25 × 10)/100] + [(26 × 11)/100]
= 18.96 + 2.5 + 2.86
= 24.32 amu
Thus, the average atomic mass of Mg is 24.32 amu
Humans have 50 pairs of chromosomes true or false
Answer:
False
Explanation:
humans have 23 pairs
What is a mixture?
any substance with a uniform composition
a combination of pure substances bonded chemically
any group of elements that are chemically bonded to one another
a blend of any two or more kinds of matter where each maintains its own unique
properties
Which term describes a mixture that is not uniform through
Can someone answer 5 for me please?
Answer:
D
Explanation:
D
Please help with the chart
Answer:
no
Explanation:
What are capacitors used for
Which statements correctly compare the masses of protons neutrons and electrons
_Ag2S __Ag +_S8
I need help ASAP
Answer:
8Ag2S 16Ag + S8
Explanation:
Weeeeeeeeeeeeeeeeeeeeeeeeeeeeeeee
This item is used for small cuts and peeling.
1-Chef Knife
2-Pizza Cutter
3-Kitchen Shears/Scissors
4-Paring Knife
Need help plz asap!!!!