The given question is incomplete, the complete question is:
A chemist must dilute 54.1 mL of 20.2 M aqueous silver perchlorate (AgC102) solution until the concentration falls to 3.00 M. He'll do this by adding distilled water to the solution until it reaches a certain final volume. Calculate this final volume, in liters. Round your answer to 3 significant digits.
Answer:
The correct answer is 0.364 L.
Explanation:
A solution is made less concentrated by diluting it with a solvent. There is no change in the number of moles when more solvent is added to the solution. In case, if the solution is diluted from V1 to V2, a change is noticed in the molarity of the solution based on the given equation,
M1V1 = M2V2
In the given case, the V1 or the volume of the original solution is 54.1 ml, M1 or the molarity of the original solution is 20.2 M.
The M2 or the molarity of the diluted solution is 3.00 M, there is a need to find the V2 or the volume of the diluted solution.
Now by putting the values in the equation we get,
= 20.2M * 54.1 ml = 3.0 M * V2
V2 = 364.27 ml
It is known that 1000 ml is equivalent to 1L, therefore, 1 ml = 0.001 L
Now, the value of V2 will be,
= 364.27 * 0.001 L = 0.36427 L or 0.364 L
Congratulations you have worked hard and now you are done with the year! I am so proud of you!
Answer:
lololol
Explanation:
What do all fossil fuels have in common?
O A. They are all liquids.
OB. They all contain crude oil.
O C. They all produce nitrogen as a combustion product.
O D. They are all nonrenewable energy sources.
Answer:
Your answer would be D, they are all non-renewable energy sources. Hope this helps!
Answer:
D. They are all nonrenewable energy sources.
HELP! ASAP! Iron (Fe) and copper (II) chloride (CuCl2) combine to form iron (III) chloride (FeCl3) and copper (Cu). If you start with 155,8 grams of
iron (Fe), how many grams of copper (Cu) will be produced?
2Fe + 3CuCl2 à 2FeCl3 + 3Cu
Answer: 30.978
Explanation:
From the equation 2 moles of Fe will result in 3 moles copper
so .325 moles Fe will result in .4875 moles Cu
Cu weights 63.546 gm per mole
.4875 moles * 63.546 gm / mole = 30.978 gm of Cu
In Atom, what is a heavier sub-atomic particle than the others and explain why
The nucleons are havier in sub atomic particle like neutrons and protons.
fun fact i read in a book even 1cm³ of nucleons are around 2 million Kg which you can't pick up by hand even by machines like buldozer.
Brainiest and 10 Points
Which has a HIGHER frequency?
A. Visible
B. Ultraviolet
Answer:
B. Ultraviolet
Explanation:
UV has a higher frequency and shorter wavelength than visible light
It took 10.40 mL of a NaOH solution to neutralize 0.307 g of KHP. What is the molarity of the NaOH solution
Answer:
0.144 M
Explanation:
First we convert 0.307 g of KHP (potassium hydrogen phthalate, KHC₈H₄O₄) into moles, using its molar mass:
0.307 g ÷ 204.22 g/mol = 0.0015 mol KHP1 mol of KHP reacts with 1 mol of NaOH, that means that in 10.40 mL of the NaOH solution there were 0.0015 moles of NaOH.
Now we calculate the molarity of the NaOH solution:
10.40 mL / 1000 = 0.0104 LMolarity = 0.0015 mol / 0.0104 L = 0.144 MGiven 32.0 g of water, if we see a temperature change from 25.0°C to 20.0°C, then how much heat energy (q) is transferred from the water?
(The specific heat of water is 4.184 J/g°C )
Answer:
Q = 669.44 J
Explanation:
Given that,
Mass of water, m = 32 g
The temperature change from 25.0°C to 20.0°C.
We need to find the amount of heat energy transferred. Let it is Q. We know that,
[tex]Q=mc\Delta T[/tex]
Where
c is the specific heat of water
Put all the values,
[tex]Q=32\times 4.184 \times (20-25)\\Q=669.44\ J[/tex]
So, 669.44 J of heat energy is transferred from the water.
The area of a telescope lens is 6507 x 10^3 mm^2. What is the area in square feet, enter your answer in scientific notation. If it takes a technician 51.6 s to polish 1.68 x 10^2 mm^2 how long does it take her to polish the entire lens ?
Answer: the area of the telescope lens is \textit{0,08507 ft}
Explanation: Happy I could help!
light energy travels in
Light energy travels in the form of waves.
Now we need to find the amount of NF3 that can be formed by the complete reactions of each of the reactants. If all of the N2 was used up in the reaction, how many moles of NF3 would be produced
The question is incomplete, the complete question is:
Nitrogen and fluorine react to form nitrogen fluoride according to the chemical equation:
[tex]N_2(g)+3F_2(g)\rightarrow 2NF_3(g)[/tex]
A sample contains 19.3 g of [tex]N_2[/tex] is reacted with 19.3 g of [tex]F_2[/tex]. Now we need to find the amount of [tex]NF_3[/tex] that can be formed by the complete reactions of each of the reactants.
If all of the [tex]N_2[/tex] was used up in the reaction, how many moles of [tex]NF_3[/tex] would be produced?
Answer: 1.378 moles of [tex]NF_3[/tex] are produced in the reaction.
Explanation:
The number of moles is defined as the ratio of the mass of a substance to its molar mass.
[tex]\text{Number of moles}=\frac{\text{Given mass}}{\text{Molar mass}}[/tex] ......(1)
Limiting reagent is defined as the reagent which is completely consumed in the reaction and limits the formation of the product.
Excess reagent is defined as the reagent which is left behind after the completion of the reaction.
In the given chemical reaction, [tex]N_2[/tex] is considered as a limiting reagent because it limits the formation of the product and it was completely consumed in the reaction.
We are given:
Mass of [tex]N_2[/tex] = 19.3 g
Molar mass of [tex]N_2[/tex] = 28.02 g/mol
Putting values in equation 1:
[tex]\text{Moles of }N_2=\frac{19.3g}{28.02g/mol}=0.689mol[/tex]
For the given chemical reaction:
[tex]N_2(g)+3F_2(g)\rightarrow 2NF_3(g)[/tex]
By the stoichiometry of the reaction:
1 mole of [tex]N_2[/tex] produces 2 moles of [tex]NF_3[/tex]
So, 0.689 moles of [tex]N_2[/tex] will produce = [tex]\frac{2}{1}\times 0.689=1.378mol[/tex] of [tex]NF_3[/tex]
Hence, 1.378 moles of [tex]NF_3[/tex] are produced in the reaction.
a. acidic
b. basic
; neutral
d. will not be affected
Find the molarity of 10% NaOH.[MOE 2003
a. 1.5
b! 2.5
c. 4
d. 0.4
10 ml of 2.5 N NaOH is mixed with 20 ml of
N HCI. The mixture is diluted to 100 ml. WI
is the nature of mixture?
IMOF 20
1. You didn't post the question to Number 1.
2.
10% means There's 10g in 100ml of this solution.
This is the weight/volume(w/v) expression of concentration.
So
We have Mass =10g
volume =100ml
Molarity = Moles of solute/volume of solution(in LITRES)
Moles=Mass/Molar mass
Molar mass of NaOH=40g/mol
Mole=10/40
=0.25mole
Volume =100ml =0.1Litres
MOLARITY=0.25/0.1 =
=2.5M
OPTION B.
3. NOTE: THE MOLARITY AND NORMALITY OF NAOH AND HCL ARE THE SAME(This doesn't happen for all compounds tho)
So We can take 2.5N(Normality) of NaOH to be 2.5M(Molarity) NaOH
I think you forgot to write the Normality of the second one. I'll take it to be 1N. Maybe you can then Input supposed value when you're solving on your own
So
1N HCl is same as 1M HCL
We were given their respective volumes
2.5M NaOH can also be written as 2.5mole/volume(in Liters)
The volume of NaOH =10ml or 0.01L
Moles = 2.5mole/L x 0.01L
You notice that Liters on top and bottom cancels out... leaving the moles
So
Mole=0.01x2.5 = 0.025moles of NaOH
we're gonna do the same for 1N HCl in 20ml(0.02L)
So
Mole = 1 x 0.02 =0.02moles
Total Mole = 0.02 + 0.025 =0.045moles
The Final Volume is 100ml as stated in the question. It was diluted to 100ml or 0.1L
So
Final Concentration In Molarity
= Total Moles/Volume in L
=0.045/0.1
=0.45M.
In a different titration, a 0.7529 g sample of a mixture of solid C6H5COOH and solid NaCl is dissolved in water and titrated with 0.150 M NaOH. The equivalence point is reached when 24.78 mL of the base solution is added. Calculate each of the following.
a. The mass, in grams, of benzoic acid in the solid sample
b. The mass percentage of benzoic acid in the solid sample
Answer:
a. 0.4539g benozic acid
b. 60.29% of benzoic acid in the solid sample
Explanation:
The benzoic acid reacts with NaOH as follows:
C6H5COOH + NaOH → C6H5COONa + H2O
Where 1 mole of the acid reacts per mole of NaOH
The NaCl doesn't react with NaOH
To solve this question we must find the moles of NaOH added = Moles of benzoic acid. With the moles of the acid and its molar mass (C6H5COOH = 122.12g/mol) we can find the mass of the acid and its mass percentage:
a. Moles NaOH = Moles Benzoic acid:
24.78mL = 0.02478L * (0.150mol / L) = 0.003717 moles Benozic acid
Mass benzoic acid:
0.003717 moles Benozic acid * (122.12g / mol) = 0.4539g benozic acid
b. Mass percentage is:
0.4539g / 0.7529g * 100 = 60.29% of benzoic acid in the solid sample
PLEASE HELP ME!!!!!!!
Answer:
The heat capacity of the metal underneath the gold is 0.431 J/g°C
Explanation:
Using the formula as outlined in the image:
Q = m × c × ∆T
Where;
Q = amount of heat energy (J)
m = mass of substance (g)
c = specific heat capacity (J/g°C)
∆T = change in temperature (°C)
According to the information in this question;
Q = 503.9J
m = 23.02g
c = ?
∆T = 74°C - 23.2°C = 50.8°C
Using Q = m × c × ∆T
c = Q ÷ m∆T
c = 503.9 ÷ (23.02 × 50.8)
c = 503.9 ÷ 1169.42
c = 0.431 J/g°C
From the above heat capacity of the metal underneath the gold, it is obvious that the metal is not pure gold (c = 0.129J/g°C)
Map
Formulate your hypothesis.
List down the materials.
• Write the methods.
Answer:
How to Formulate an Effective Research Hypothesis
State the problem that you are trying to solve. Make sure that the hypothesis clearly defines the topic and the focus of the experiment.
Try to write the hypothesis as an if-then statement. ...
Define the variables.
Explanation:
Question 1
Where does photosynthesis happen in a plant cell?
O Cell membrane
O Cell wall
O Chloroplast
O Mitochondria
Answer:
Chloroplast
Explanation:
Photosynthesis happens in chloroplast of plants. Mitochondira is where the cellular respiration happens.
What transition energy corresponds to an absorption line at 460 nm?
A. 6.52 x 10-19 J
B. 4.32 x 10-19 J
C. 4.45 x 10-19 J
D. 2.31 x 10-19 J
Answer:
B. 4.32 x 10-19 J is correct via a p e x
Explanation:
Write a conclusion statement that addresses the following questions: • Explain what the color change indicated about the changes in the concentrations of Co(H2O)62+ and CoCl42– in each trial. • Do your data support or fail to support your hypothesis (include examples)? • How do you think the investigation can be explored further?
When the concentration of the HCl is varied, the color of the solution is changed as the equilibrium position moves to the left or right.
What is equilibrium?The term equilibrium in a chemical reaction connotes that the forward and the revers reactions proceed at the same rate. Let us note that Co(H2O)6^2+ is pink in color while CoCl4^2– is blue in color.
As such, when the concentration of the HCl is varied, the color of the solution is changed as the equilibrium position moves to the left or right.
Learn more anout equilibrium: https://brainly.com/question/365923
Hydration of alkynes gives good yields of single compounds only with symmetrical or terminal alkynes. Draw the major organic product(s) formed when 3-methylcyclodecyne undergoes hydration in the presence of HgSO4 and H2SO4.
Answer:
Following are the solution to the given choice:
Explanation:
Hex-2-yne is just not alkyne symmetric, therefore two things respectively hexan-3-one and hexan-2-one are to be given.
The attached file it displayed the response along with the mechanism, please find the.
When an acetic acid solution is titrated with sodium hydroxide, the slope of the titration curve (pH versus volume of NaOH added) increases when sodium hydroxide is first added. This change shows that ________
Answer:
When an acetic acid solution is titrated with sodium hydroxide, the slope of the titration curve (pH versus volume of NaOH added) increases when sodium hydroxide is first added. This change shows that acetic acid is being converted to sodium acetate.
Explanation:
ABOUT TITRATION - Titration is a chemical analysis method for determining the amount of a constituent in a sample by adding an exact known quantity of another substance to the measured sample with which the desired constituent reacts in a specific, known proportion. A burette, which is essentially a long, graduated measuring tube with a stopcock and a delivery tube at the bottom end, is used to gradually administer a standard solution of titrating reagent, or titrant.
It is feasible to identify a good visual color indicator for many titration processes that will signify the end point at, or very near to, the equivalence point.
Acid-base titrations, precipitation titrations, complex-formation titrations, and oxidation-reduction (redox) titrations are examples of such titrations, which are categorised according to the nature of the chemical reaction that occurs between the sample and the titrant.
Titrations of metal ions with the reagent disodium ethylenediaminetetraacetate are the most important titrations based on complex-formation processes (a salt of edetic acid, or EDTA).
Hence , the answer is that acetic acid is converted into sodium acetate.
How many atoms in total are there in 7.35 mol of magnesium oxide (MgO)
molecules?
Answer:
4.42 x 10^24
Explanation:
In the following reaction, C5H12(1) + 8 O2 (g) - 6 H2O (g) + 5 CO2 (g), how many
moles of water (H20) are produced by 14.2 moles of O2?
Answer:
10.65 moles
Explanation:
O2:H2O
8:6
14.2:x
x= 10.65 moles
How do isotopes of the same atom react chemically? How do isotopes of the same atom compare in size?
Atoms of the same elements differing in the number of neutrons in their nuclei are known as isotopes. Thus, isotopes of an element have the same atomic number but different atomic mass number. Isotopes of an element have similar chemical properties but different physical properties.
Explain why the coefficients on the left side of the equation don’t necessarily equal the coefficients on the right side of the equation. Is this possible if mass is being conserved?
Answer:
Explanation:
Short answer: Yes.
The coefficients may not be conserved, but mass always has to be. Take this equation as an example
2 Mg3P2 ===> 6Mg + P4
There is a 2 on the left side and 6 and 1 on the right. I hope you mean that the coefficient 2 is not equal to 7.
But let's look a little closer. You have to look at the molecular structure of the left and right side.
2Mg3P2 has 6 Mgs and 4 Ps on the left side.
6Mg is on the right. They are free standing.
P4 has 1 molecule consisting of 4 Ps.
Everything balances.
This is a terrific question to be asking. You need to understand the internal balance numbers vs the molecular ones on the out side.
That sounds like a bit of gobbledygook and it takes a bit of study.
2 Mg3P2 means that Mg3P2 is written twice.
Mg3P2 ==> "3 Mg2+ + 2P3+ and there is another one written the same way.
Mg3P2 ==> "3 Mg2+ + 2P3+
how do the hydrosphere and atmosphere interact? give an example
Answer:
Evaporation
Explanation:
Water in the ocean, rivers, lakes, etc. is part of the hydrosphere, and when that water evaporates it enters the atmosphere
WILL GIVE BRAINLIEST TO FIRST ANSWER
picture ⬆️
Answer: A Molecular Approach, 2/e. Mole ratio. 2 mol C4H10 : 13 mol O2 : 8 mol CO2 : 10 mol H2O. ❖ 2 molecules of C4H10 react ... of aluminum and 73.15 g of sulfur are combined to form aluminum sulfide according to the equation:.
Explanation:
Calculate the mass of 100.0 mL of a substance whose density is 19.32 kg/L. Express your answer in kilograms using the correct number of significant figures. Do not enter your answer using scientific notation.
Answer:
1.932 kg
Explanation:
First we convert 100.0 mL to L:
100.0 mL / 1000 = 0.1000 LThen we calculate the mass of the substance, using the definition of density:
Density = mass / volumemass = density * volume19.32 kg/L * 0.1000 L = 1.932 kgAs the multiplication involves two numbers of 4 significant figures each, the answer needs to have 4 significants figures as well.
PLEASE HELP ME!!!!
TRUE or FALSE: When sperm and egg cells combine in fertilization, the
offspring ends up with the same number of chromosomes as their
parents.
Answer: False
Explanation:
Hope this help
Answer:
True.
Explanation:
Every child will contain the same number of chromosomes as the parents (otherwise they wouldn't be considered the same species). Additionally, animals can only mate with a species containing the same number of chromosomes as themselves. This means if the offspring of the parents had a different number fo chromosomes the offspring would be unable to mate with animals of it's own species.
If atoms are electrically neutral then how do they form bonds?
Answer:
The nucleus contains neutrons and protons; protons carry the positive charge. The shells contain electrons which carry the negative charge. So, how can the atom be changed. ... Covalent bonds are electrically neutral because they are not formed due to the transfer of electrons but sharing of electrons.Explanation:
Hope it helps ^-^
#CarryOnLearning
Answer:
When an atom has an equal number of electrons and protons, it has an equal number of negative electric charges (the electrons) and positive electric charges (the protons). The total electric charge of the atom is therefore zero and the atom is said to be neutral. ... Chemically, we say that the atoms have formed bonds
Pick the correct statement about the pure water. Group of answer choices Pure water contains no ions. Pure water contains equal amounts of hydroxide [OH-] and hydronium [H3O ] ions. Pure water contains larger amounts of hydroxide [OH-] than hydronium [H3O ] ions. Pure water is an electrolyte. Pure water contains smaller amounts of hydroxide [OH-] than hydronium [H3O ] ions.
Answer:
Pure water contains no ions. TRUE
Pure water contains equal amounts of hydroxide [OH-] and hydronium [H3O+ ] ions. TRUE
Explanation:
This is the equilibrium for pure water:
2H₂O ⇄ H₃O⁺ + OH⁻ Kw
We see that pure water has no Ions. Pure water can not conduct electricity.
Generally ionized water comes from the water tap.
Another feature of pure water is pH.
Definetely pH of pure water is : 7
As pH = 7, [H₃O⁺] = 1×10⁻⁷
Then, [OH⁻] = 1×10⁻⁷
This is reazonable because Kw is 1×10⁻¹⁴ and Kw = [H₃O⁺] . [OH⁻]
In conclussion:
Pure water contains no ions. TRUE
Pure water contains equal amounts of hydroxide [OH-] and hydronium [H3O+ ] ions. TRUE
Pure water contains larger amounts of hydroxide [OH-] than hydronium [H3O+] ions. FALSE
Pure water is an electrolyte. FALSE
Pure water contains smaller amounts of hydroxide [OH-] than hydronium [H3O ] ions. FALSE
The table below shows some characteristics of three different types of muscles
Answer: Type A are cardiac muscles Type B are skeletal muscles, and Type C are smooth muscles.
Explanation: sub to technoblade :P