Answer:
The final volume will be "70.08 mL".
Explanation:
The given values are:
Molar mass,
M1 = 548 nM
or,
= [tex]5.48\times 10^{-7} \ M[/tex]
M2 = 484 nM
or,
= [tex]4.84\times 10^{-7} \ M[/tex]
Volume,
V1 = 61.9 mL
V1 = ?
By using the expression, we get
⇒ [tex]M1\times V1=M2\times V2[/tex]
or,
⇒ [tex]V2=\frac{M1\times V1}{M2}[/tex]
By substituting the values, we get
[tex]=\frac{5.48\times 10^{-7}\times 61.9}{4.84\times 10^{-7}}[/tex]
[tex]=\frac{339.212}{4.84}[/tex]
[tex]=70.08 \ mL[/tex]
8
What happens to solid waste in the circulatory system?
A it's expelled through the lungs
B
It pumps into the coronary circulation
C
It's dropped off in the kidneys
D
It's deposited in the aorta
Answer:c it’s dropped off in the kidneys
Explanation:
I took the quiz
The solid wastes are from the circulatory system is expelled to the kidney where, the nitrogenous wastes like urea and uric acid is excreted as urine from the body.
What is circulatory system ?A circulatory system is an organ system, where the blood is purified and oxygenation of blood takes place. Through circulatory system, the blood reaches throughout the body pumped from the heart through veins.
The organs included in circulatory system are lungs, heart, aorta, veins, blood vessels etc. There are various kinds of blood vessels each having specific functions.
There is a network of blood vessels including arteries and large veins, capillaries that join the venules and other veins. All the nutrients and ions are circulated throughout the body through blood and solid wastes are then expelled to kidney.
Kidney function as a sieve to clean the good fluid from waste products. Uric acid and urea along with water excreated as urine then. Thus, option C is correct.
To find more about circulatory system, refer the link below:
https://brainly.com/question/10103458
#SPJ6
A 1 liter solution contains 0.383 M hydrofluoric acid and 0.510 M potassium fluoride.
Addition of 0.096 moles of calcium hydroxide will:
(Assume that the volume does not change upon the addition of calcium hydroxide.)
Raise the pH slightly
Lower the pH slightly
Raise the pH by several units
Lower the pH by several units
Not change the pH
Exceed the buffer capacity
Answer:
Lower the pH slightly
Explanation:
The mixture of HF, hydrofluoric acid and KF, potassium fluoride produce a buffer that is defined for the equilibrium:
HF(aq) → H⁺(aq) + F⁻(aq)
The buffer can maintain the pH of a solution despite the addition of strong bases or acids.
The reaction of HF with Ca(OH)2 is:
2HF + Ca(OH)2 → 2H2O + CaF2
That means the calcium hydroxide is decreasing the concentration of HF. Based on the equilibrium, the H+ and F- ions will decrease in order to produce more HF. As H+ is decreasing due the equilibrium and not for the addition of a strong base, the pH is decreasing slightly.
Do u believe that you are beautiful/handsome?
Yes or No?
Which of the following is true for a gas under conditions of very high pressure? (5
points)
1) PV > nRT, because the real volume of the gas would be more than the ideal
volume.
2) PV = nRT, because intermolecular forces are considerable at very high
pressures.
3) PV = nRT, because all gases behave as ideal gases at very high pressures.
04) PV = nRT, because the volume of the gas would become negligible.
Answer:
1) PV > nRT, because the real volume of the gas would be more than the ideal
volume.
Explanation:
According to the ideal gas equation; PV = nRT. Let us recall that this equation only holds under ideal conditions.
Gases exhibit ideal behavior under high temperature and low pressure. At higher pressure, the real volume of the gas is larger than the ideal volume of the gas.
Thus, at high pressure, PV > nRT, because the real volume of the gas would be more than the ideal volume.
Answer:
1) PV > nRT, because the real volume of the gas would be more than the ideal volume.
Explanation:
just took the test :)
HCN
H:C:N:
3.
Is this Lewis Structure correct?
Answer:
No, your missing some bonds
A bottle labeled 0.01 M HCl is found in the laboratory. Assuming that the HCl is completely ionized calculate the [H+], [OH-] and the pH of the solution.
Answer:
[H⁺] = 0.01 M[OH⁻] = 1x10⁻¹² MpH = 2Explanation:
The assumption that the HCl is completely ionized means that the original concentration of the acid is equal to [H⁺].
[H⁺] = 0.01 MWith [H⁺], we can calculate [OH⁻], by using the following formula:
[H⁺] * [OH⁻] = 10⁻¹⁴0.01 M * [OH⁻] = 10⁻¹⁴[OH⁻] = 1x10⁻¹² MFinally we calculate the pH of the solution:
pH = -log[H⁺]pH = 2Food Science is the study of the physical, biological, and chemical makeup of food; the
causes of food deterioration; and the concepts ulderlying food processing.
True
False
[H+] [OH-] =
NEED HELP ASAP!!!
How do the equilibrium concentrations of the reactants compare to the equilibrium concentrations of the product?
Answer: It depends equilibrium constant K
Explanation: You need to to have reaction formula.
If K >> 1 then concentrations of products are much bigger than
concentrations of reactants. If K < < 1, concentration of products is small.
in writing a chemical equation that produces hydrogen gas, the correct representation of hydrogen gas is
a.H
b.2H
c.H2
d.OH
Answer:
h2
Explanation:
If 3.13 mol of an ideal gas has a pressure of 2.33 atm and a volume of 72.31 L, what is the temperature of the sample in degrees Celsius?
Answer:
382.49 C degree Celsius
Explanation:
Hello,
This problem deals with understanding the ideal gas law which hopes to predict how ideal gases might behave in any given condition. I listed the formula below and we are basically just going to solve for temperature by rearranging the equation as seen on the picture (there's also other rearranged ones in case you need to solve for those).
Universal gas constant R has a value of 0.0821 L * atm/(mole * K) when working with these given units so it will be part of this equation. R value changes based on what units you have.
T = PV/nR
= (2.33) (72.31) / (3.13)(0.0821)
= 655.64 K
Question is asking temperature in celsius so we employ the formula attached below:
C = K - 273.15
= 655.64-273.15
= 382.49 degree Celsius
382.49 degree Celsius is the answer!
15. Objects can have kinetic energy, potential energy, or both. Energy can be in the form of motion. Energy can
also be stored by objects in various ways, including position, chemical bonds, or physical state.
Which statement is true? And why?
a. An object’s mass has no effect on its potential energy.
b. Potential energy is converted to kinetic energy as a stationary object begins to move.
c. Kinetic energy is converted to potential energy as a stationary object begins to move.
d. A stretched rubber band stores no energy.
Answer: b because Potential energy is converted to kinetic energy as a stationary object begins to move.
Explanation:
Mercury: Mineral or Not Mineral? Mineral Not Mineral
Answer:
not a mineral but is a “mineraloid
Explanation:
not mineral
Explanation: its an element but it is not a mineral
Give the ratio that balances out the following equation: ___Cr + ___Pb(NO3)4 ---> ___ Cr(NO3)3 + ____ Pb
Answer: Ratio : 4, 3, 4, 3 are the answers.
Explanation:
How much heat must be absorbed by 375 grams of water to raise its temperature by 25 degrees Celsius? Specific heat for water= 4.184 J/g/C or K
Answer:
[tex]3.9*10^4 J[/tex]
Explanation:
See image for explanation!Answer:
[tex]\boxed {\boxed {\sf 39, 225 \ Joules}}}[/tex]
Explanation:
Since we are given the mass, temperature, and specific heat, we should use the following formula to calculate heat energy.
[tex]q=mc \Delta T[/tex]
We have 375 grams of water, the specific heat of water is 4.184 J/g ° C, and the temperature is raised 25 degrees Celsisus. Therefore:
m= 375 g c= 4.184 J/g °C ΔT= 25°CSubstitute the values into the formula.
[tex]q= (375 \ g)(4.184 \ J/g \textdegree C)(25 \textdegree C)[/tex]
Multiply the first two values together. The units of grams will cancel.
[tex]q=1569 \ J/ \textdegree C(25 \textdegree C)[/tex]
Multiply again. This time, the degrees Celsius cancel, so we are left with only the units of Joules.
[tex]q= 39225 \ J[/tex]
39,255 Joules of heat must be absorbed by the water.
At 27.0°C, the volume of a gas is 630 L. At the same pressure, its volume is 92,0 mL at a temperature of
Answer:
–272.96 °C
Explanation:
From the question given above, the following data were obtained:
Initial temperature (T₁) = 27.0 °C
Initial volume (V₁) = 630 L.
Final volume (V₂) = 92.0 mL
Final temperature (T₂) =?
Next, we shall convert 27.0 °C to Kelvin temperature. This can be obtained as follow:
T(K) = T(°C) + 273
Initial temperature (T₁) = 27.0 °C
Initial temperature (T₁) = 27.0 °C + 273
Initial temperature (T₁) = 300 K
Next, we shall convert 92.0 mL to L. This can be obtained as follow:
1000 mL = 1 L
Therefore,
92 mL = 92 mL × 1 L / 1000 mL
92 mL = 0.092 L
Next, we shall determine the final temperature.
Initial temperature (T₁) = 300 K
Initial volume (V₁) = 630 L.
Final volume (V₂) = 0.092 L
Final temperature (T₂) =?
V₁ / T₁ = V₂ / T₂
630 / 300 = 0.092 / T₂
2.1 = 0.092 / T₂
Cross multiply
2.1 × T₂ = 0.092
Divide both side by 2.1
T₂ = 0.092 / 2.1
T₂ = 0.04 K
Finally, we shall convert 0.04 K to celsius temperature. This can be obtained as follow:
T(°C) = T(K) – 273
Final temperature (T₂) = 0.04 K
Final temperature (T₂) = 0.04 – 273
Final temperature (T₂) = –272.96 °C
Study the reaction.
CH4 + 2O2 → CO2 + 2H2O
If 7.4 moles of carbon dioxide (CO2) form at the end of the reaction, how many moles of methane (CH4) and oxygen gas (O2) entered the reaction?
? moles of methane and
? moles of oxygen gas
7.4 moles of methane (CH₄)
14.8 moles of oxygen gas (O₂)
mrs tuckers class is doing an experiment they fill up a cup with ice water they measure the temperature of both the water and the classroom after one hour . what will mrs tucker observe about the temperature of ice water after one hour
A. The temperature will increase
B. The temperature Will remain the same
C. The temperature will decrease greatly
D. The temperature Will decrease slightly
Answer:
Ofc D. bc if the temp decreases, that means it is getting colder u dummy! But if it increases, it is getting warmer.
Explanation:
I got it right on USATestprep for using common sense, mark me the brainliest.
Magnesium hydroxide and sodium hydroxide are both strong bases. The pH of a saturated solution of sodium hydroxide is greater than 14. The pH of a saturated
solution of magnesium hydroxide is about 10.2. Why do the solutions have different pH values?
Answer: Solubility of NaOH is greater and there are more OH- ions in solution.
Explanation: Reactions : NaOH (s) ⇒ Na+ (aq) + OH- (aq)
Mg(OH)2 (s) ⇒ Mg2+ (aq) + 2 OH-(aq)
Although in same amount of moles, Mg(OH)2 produces
two (OH-)-ions in water solution, solubility of Mq(OH)2 is smaller.
Concentration [OH-]ions is smaller in saturated water solution
of Mg(OH)2
If the pH of a solution is 6.96, then the solution is a
Answer:
acid
Explanation:
solution with pH less than 7 is acid
those with more that 7 is base
those equal to 7 is neutral
Ice melts after adding heat. The free energy is ————— !
A. Exothermic
B. Not temperature dependent
C. Temperature dependent
D. Depended on how it is heated
E. React with active metals to form h2 gas
F. Endothermic
The cation that has the same number of electrons (isoelectronic) as Ne is
None of the listed options
O Na
Mg 2-
All of the listed options
O AI 3-
what do adamantium,vibranium and unobtainum have in common
Answer:
they're all fake
Explanation:
What is the limiting reactant in the following equation? How much Fe2O3 will be produced if 2.1 g of Fe reacts with 2.1 g of O2?
4 Fe + 3O2 —> 2Fe2O3
Answer:
Fe is limiting reactant and 3.00g of Fe2O3 will be produced
Explanation:
To solve this question we must convert the mass of each reactant to moles and, using the reaction we can find limiting reactant. With moles of limiting reactant we can find moles of Fe2O3 and its mass as follows:
Moles Fe -Molar mass: 55.845g/mol-
2.1g * (1mol / 55.845g) = 0.0376 moles
Moles O2 -Molar mass: 32g/mol-
2.1g * (1mol / 32g) = 0.0656 moles
For a complete reaction of 0.0656 moles of O2 are needed:
0.0656moles O2 * (4mol Fe / 3 mol O2) = 0.0875 moles Fe
As there are just 0.0376 moles,
Fe is limiting reactant
The mass of Fe2O3 is:
Moles:
0.0376 moles Fe* (2mol Fe2O3 / 4mol Fe) = 0.0188 moles Fe2O3
Mass:
0.0188 moles Fe2O3 * (159.69g / mol) =
3.00g of Fe2O3 will be produced
Consider the aldol-dehydration reaction. Draw the two possible products of the reaction between benzaldehyde and methylethylketone. (Do not draw the products of the double-condensation.)
Solution :
An [tex]$\text{aldol condensation}$[/tex] reaction is a type of [tex]\text{condensation reaction}[/tex] in organic chemistry where the enol or an enolate ion reacts with the carbonyl compound and forms a [tex]$\beta$[/tex]-hydroxyaldehyde or a [tex]$\beta$[/tex]-hydroxyketone, and then followed by a dehydration to give conjugated enone.
Benzaldehyde reacts with methylketone and forms two products:
Which of the following substances can be dissolved in pure water to give a basic solution?
Hydrogen chloride
Sodium bromide
Sodium hydroxide
Sodium chloride
I think it's sodium hydroxide
Explanation:
sodium hydroxide is a base
I need guidance on this question
Answer:
(C) NO2 has covalent bonds.
What compound(s) does pure water contain?
1. How many grams of water are in a cup containing
0.1 moles of H2O?
Answer:
Explanation:
fdcdf
A community located downwind from a coal-fired power plant has seen a recent increase in the number of dead and dying trees. A so scientist measured values for the following parameters before and after the trees died off. Which of the following oil data should be used to determine if the coalfired power plant emiations were the cause of the damage to the trees
a. Moisture content and water retention
b. Parent material composition
c. Pesticide and herbicide residue levels
d. Calcium and aluminum levels
Answer:
Option D, Calcium and Aluminum levels
Explanation:
The coal fired power plant releases huge amount of particulate and gaseous emissions such as mercury, sulphur dioxide, nitrogen oxide etc. When there is rain, these gaseous and particulate matter comes to the ground along with rain water and pollute the soil. There are also chances of acid rain due to the presence of sulphur dioxide. Polluted soil and acid rain negatively impact the growth of the plants and causes leaching of Aluminium thereby decreasing the availability of calcium for the plants. Thus, the trees die. Hence, if the amount of Aluminium and Calcium in soil is determined, one can easily deduce the cause of death of trees.
Hence, option D is correct