a chemical that mimic the effects of naturally occurring substances are known as:

Answers

Answer 1

Chemicals that mimic the effects of naturally occurring substances are known as "synthetic analogs" or "synthetic equivalents."

A synthetic analog refers to a chemical compound that is intentionally designed and synthesized to imitate the biological effects and functions of naturally occurring substances. These analogs are created with the purpose of replicating or enhancing specific properties or activities found in natural compounds. By mimicking the structure and function of natural substances, synthetic analogs can be used in various fields such as pharmaceuticals, agriculture, and materials science. Synthetic analogs offer the advantage of controlled production, modification, and optimization of desired properties, allowing for tailored applications and improved effectiveness compared to their natural counterparts. Through careful design and synthesis, scientists can create synthetic analogs that exhibit similar or even enhanced biological activity, opening up possibilities for novel therapeutic agents, improved crop protection, and innovative materials.

To learn more about Chemicals

https://brainly.com/question/29886197

#SPJ11


Related Questions

g choose the arrow that most closely describes each question. the absorption with the lowest energy?

Answers

The arrow that most closely describes the question "the absorption with the lowest energy" is a downward-pointing arrow ↓.

In spectroscopy, particularly in electronic transitions, absorption refers to the process where a molecule or atom absorbs electromagnetic radiation, typically in the form of photons, causing the promotion of an electron from a lower energy level to a higher energy level. The energy difference between the two levels determines the energy of the absorbed photon.

When considering the absorption with the lowest energy, it implies that the absorbed photons have the lowest energy among the available energy levels. In this context, the downward-pointing arrow (↓) is used to represent the absorption of lower energy photons.

In spectroscopic diagrams or energy level diagrams, the upward-pointing arrow (↑) is typically used to represent the absorption of higher energy photons. However, since the question specifically asks for the absorption with the lowest energy, the appropriate arrow would be a downward-pointing arrow (↓).

Therefore, the arrow that most closely describes the question "the absorption with the lowest energy" is a downward-pointing arrow ↓.

Learn more about spectroscopy: https://brainly.com/question/28457917

#SPJ11

A 0.580 {~m} aqueous solution of {KBr} has a total mass of 61.0 {~g} . What masses of solute and solvent are present?

Answers

The mass of KBr in the solution is 4.22 g, and the mass of water in the solution is 56.8 g.

The concentration of an aqueous solution can be calculated by dividing the mass of the solute by the mass of the solution. To determine the masses of solute and solvent present in a 0.580 m aqueous solution of KBr with a total mass of 61.0 g, we can use the following formula: Concentration (m) = mass of solute (in moles) / volume of solution (in liters) Let us begin by calculating the number of moles of KBr present in the solution: We know that molarity (M) = moles of solute / liters of solution.

Since the molarity of the solution is 0.580 M, we can rearrange the formula to find the number of moles of KBr: Moles of KBr = Molarity × Liters of solution To find the number of liters of the solution, we can use the following formula: Volume of solution = mass of solution / density of solution The density of the solution can be found by using the following formula: Density of solution = (mass of solute + mass of solvent) / volume of solution Since we know the total mass of the solution, we can subtract the mass of solute to obtain the mass of the solvent.

The mass of solute is equal to the mass of the solution multiplied by the concentration: Moles of KBr = 0.580 mol/L × (61.0 g / 1,000 g) = 0.0354 mol Next, we can calculate the mass of the solute: Mass of KBr = Moles of KBr × Molar mass of KBr= 0.0354 mol × 119.0 g/mol= 4.22 g Finally, we can calculate the mass of the solvent: Mass of solvent = Total mass of solution - Mass of solute= 61.0 g - 4.22 g= 56.8 g.

To know more about solution visit:

https://brainly.com/question/1616939

#SPJ11

Final answer:

The given molality would indicate a mass of KBr that exceeds the total given mass for the solution, suggesting an error in the provided information.

Explanation:

The student's question is regarding a 0.580 m aqueous solution of KBr (potassium bromide) that has a total mass of 61.0 g. In chemistry, the 'm' stands for molality, which is the ratio of moles of solute to the mass of solvent in kilograms. Here, the molality is 0.580, which means there are 0.580 moles of KBr in 1 kg of water.

Firstly, we need to find the mass of the KBr solute. The molar mass of KBr is approximately 119 g/mol. Using the formula: mass = molality * molar mass * mass solvent, we find the mass of KBr is 0.580 mol/kg * 119 g/mol * 1 kg = 69 g. Since this is greater than the total mass given, there must be a mistake in the information provided.

Assuming the total mass given (61.0 g) is correct, the mass of the water solvent is found by subtracting the calculated solute mass from the total mass. Unfortunately, in this case, as the calculated mass of the KBr exceeds the total mass, this operation is not possible. This suggests that there's a mistake in the provided data.

Learn more about Molality Calculation here:

https://brainly.com/question/35373856

#SPJ12

2. The amount of mercury in a polluted lake is 0.4μgHg/mL. If the lake has a volume of 6.0×10 10
ft 3
, what is the total mass in kilograms of mercury in the lake? (1 inch =2.54 cm;1ft=12 inch ) 7×10 5
kg
3×10 5
kg
2×10 5
kg
1×10 5
kg
6×10 5
kg

Answers

The given amount of mercury in the polluted lake is 0.4 μgHg/mL. Volume of the lake, V = 6.0 × 1010 ft3Density of lake, ρ = mass/volume There are 12 inches in one foot1 inch = 2.54 cm

1 foot = 12 inches = 12 × 2.54 = 30.48 cm = 0.3048 mTherefore,Volume of the lake = (6.0 × 1010 ft3) × (0.3048 m/ft)³= (6.0 × 1010) × (0.3048)³ m³= (6.0 × 1010) × (0.0277) m³= 1.66 × 109 m³Mass of mercury = density × volume = (0.4 μgHg/mL) × (1g/10³ mg) × (1 mg/10⁶ μg) × (1.66 × 10⁹ m³) × (10⁶ mL/m³) × (1 kg/10³ g) = 6.64 × 10⁵ kg

Therefore, the total mass of mercury in the lake is 6.64 × 10⁵ kg.

To know more about  amount visit:

brainly.com/question/32453941

#SPJ11

which alkyl halide(s) would give the following alkene as the only product in an elimination reaction? elimination product CI CI 21. What is the product of the following reaction? NH2 (2 equivalents) Br Br III A) II and III B) Only II C) Only III D) Only I

Answers

Only III is the correct answer as alkyl halide III allows for an E2 elimination to form the desired alkene.

In order to determine which alkyl halide(s) would give a specific alkene as the only product in an elimination reaction, we need to consider the mechanism of the reaction and the conditions under which it takes place.

Elimination reactions typically involve the removal of a leaving group (usually a halogen) and a proton from adjacent carbons to form a new pi bond. The most common types of elimination reactions are E1 and E2.

In an E1 reaction, the leaving group is first dissociated to form a carbocation, followed by the removal of a proton to form the alkene. In an E2 reaction, the leaving group is removed simultaneously with the deprotonation.

Based on the given information that the elimination product is an alkene, we can deduce that the reaction follows an E2 mechanism since E1 reactions generally lead to carbocation rearrangements and the formation of mixtures of products.

Now, let's analyze the options provided:

A) II and III

B) Only II

C) Only III

D) Only I

Since there is no alkyl halide labeled as "I" in the given options, we can eliminate option D.

For the reaction NH2 (2 equivalents) Br Br, it suggests that two equivalents of ammonia (NH2) are used. This indicates that the reaction is likely to be an E2 reaction, where two molecules of ammonia would act as the base to remove the two bromine atoms.

Based on this analysis, the correct answer is option C) Only III, as the alkyl halide labeled as "III" is the only option that allows for an E2 elimination to occur, leading to the formation of the desired alkene as the only product.

It is important to note that a more comprehensive analysis may be required, considering other factors such as steric hindrance, the presence of different leaving groups, and the strength of the base to make a definitive determination.

Learn more about Elimination

brainly.com/question/32403760

#SPJ11

magnesium chloride Express your answer as a chemical formula. A chemical reaction does not occur for this que Part B rubidium sulfide Express your answer as a chemical formula.

Answers

Magnesium chloride is a chemical compound with the formula MgCl2. This compound is an ionic compound, meaning it is formed by the electrostatic attraction between oppositely charged ions.

Magnesium chloride is a white crystalline substance that is highly soluble in water. Magnesium chloride is commonly used in a variety of applications, including as a deicing agent, in food processing, and as a nutritional supplement.Rubidium sulfide is a chemical compound with the formula Rb2S. This compound is an ionic compound, meaning it is formed by the electrostatic attraction between oppositely charged ions. Rubidium sulfide is a yellow crystalline substance that is soluble in water. Rubidium sulfide is a highly reactive compound that can react violently with water to produce rubidium hydroxide and hydrogen sulfide gas. It is commonly used in the synthesis of other rubidium compounds and in organic chemistry as a reducing agent.

To know more about Magnesium chloride visit :

https://brainly.com/question/33426300

#SPJ11

Determine whether the following compounds are acidic, neutral,
or basic. Justify your choice.
NaCl
KCN
NH4NO3
NH4F
Na3PO4

Answers

Compounds can be categorized as acidic, basic, or neutral depending on their pH. Here are the given compounds and their pH range

NaCl: Neutral

KCN: Basic

NH4NO3: Neutral

NH4F: Acidic

Na3PO4: Basic

NaCl: NaCl is the chemical symbol for sodium chloride, which is more commonly known as table salt. NaCl is a neutral compound. When dissolved in water, it does not increase or decrease the concentration of hydrogen ions (H+) or hydroxide ions (OH-), resulting in a neutral pH.

KCN: KCN is a basic compound. When dissolved in water, KCN increases the concentration of hydroxide ions (OH-), resulting in a basic pH.

NH4NO3: NH4NO3 is a neutral compound. When dissolved in water, it does not increase or decrease the concentration of hydrogen ions (H+) or hydroxide ions (OH-), resulting in a neutral pH.

NH4F: NH4F is an acidic compound. When dissolved in water, NH4F increases the concentration of hydrogen ions (H+), resulting in an acidic pH.

Na3PO4: Na3PO4 is a basic compound. When dissolved in water, Na3PO4 increases the concentration of hydroxide ions (OH-), resulting in a basic pH.

Learn more about Compounds at https://brainly.com/question/31477323

#SPJ11

Given the following data for the hydrate {M}({NO}_{3})_{3} dot {X} {H}_{2} {O} , where {M} is a metal with the atomic mass 65.8

Answers

The chemical formula for hydrates is usually written as {M}{X} · {nH2O}. For this particular hydrate {M}({NO3})3 · {X}{H2O}, where {M} is a metal with atomic mass 65.8, the value of X can be calculated using the given data.
The first step is to determine the mass of the sample given in the problem. This is done using the formula:
mass of sample = mass of hydrate + mass of crucible - mass of crucible and hydrate
Substituting the given values, the mass of the sample can be calculated as:
  Next, the mass of {M}({NO3})3 in the sample needs to be determined. This can be done by subtracting the mass of the H2O from the mass of the sample:

Finally, X can be determined using the mole ratio between {M}({NO3})3 and H2O. Since the formula for the hydrate is {M}({NO3})3 · {X}H2O, the mole ratio is:
1 mol {M}({NO3})3 : X mol H2O
Therefore:
X = moles of H2O = mass of H2O / molar mass of H2O
X = 9.09 / 18.01528 = 0.5048 mol

To know more about  hydrates visit:

brainly.com/question/10665473

#SPJ11

for a first order reaction liquid phase reaction with volumetric flow rate of 1 lit/h and inlet concentration of 1 mol/lit and exit concentration of 0.5 mol/lit, v cstr/v pfr

Answers

The ratio of the volumes of a continuous stirred tank reactor (CSTR) to a plug flow reactor (PFR) for the given first-order liquid phase reaction is approximately 2.

In a continuous stirred tank reactor (CSTR), the reactants are well mixed, and the reaction takes place throughout the reactor with a uniform concentration. The volumetric flow rate of 1 lit/h means that 1 liter of the reactant solution is entering the reactor every hour. The inlet concentration of 1 mol/lit indicates that the concentration of the reactant entering the CSTR is 1 mole per liter.

In the CSTR, the reaction follows first-order kinetics, which means that the rate of reaction is directly proportional to the concentration of the reactant. As the reaction progresses, the concentration decreases. The exit concentration of 0.5 mol/lit indicates that the concentration of the reactant leaving the CSTR is 0.5 mole per liter.

On the other hand, in a plug flow reactor (PFR), the reactants flow through the reactor without any mixing. The reaction occurs as the reactants move through the reactor, and the concentration changes along the length of the reactor.

To calculate the ratio of the volumes of the CSTR to the PFR, we can use the concept of space-time, which is defined as the time required for a reactor to process one reactor volume of fluid. The space-time for a CSTR is given by the equation:

τ_cstr = V_cstr / Q

where τ_cstr is the space-time, V_cstr is the volume of the CSTR, and Q is the volumetric flow rate.

Similarly, the space-time for a PFR is given by:

τ_pfr = V_pfr / Q

where τ_pfr is the space-time and V_pfr is the volume of the PFR.

Since the space-time is inversely proportional to the concentration, we can write:

τ_cstr / τ_pfr = (V_cstr / Q) / (V_pfr / Q) = V_cstr / V_pfr

Given that the inlet concentration is 1 mol/lit and the exit concentration is 0.5 mol/lit, we can conclude that the average concentration inside the CSTR is 0.75 mol/lit. This means that the reaction has consumed half of the reactant in the CSTR.

From the rate equation for a first-order reaction, we know that the concentration at any point in the PFR can be calculated using the equation:

ln(C/C0) = -k * V_pfr

where C is the concentration at any point in the PFR, C0 is the initial concentration, k is the rate constant, and V_pfr is the volume of the PFR.

Substituting the values, we have:

ln(0.5/1) = -k * V_pfr

Simplifying, we get:

-0.693 = -k * V_pfr

Since ln(0.5/1) is equal to -0.693, we can deduce that the volume of the PFR is approximately twice the volume of the CSTR.

Learn more about liquid

brainly.com/question/20922015

#SPJ11

when produced, free catecholamines (NE and EPI) are short lived. They are best measured in the urine, though catecholamine metabolites are best measured in the serum True or false? chemistry

Answers

The given statement that "When produced, free catecholamines (NE and EPI) are short-lived" is true. Similarly, the statement "They are best measured in the urine, though catecholamine metabolites are best measured in the serum" is also true.

Epinephrine and norepinephrine, also known as catecholamines, are released by the adrenal medulla in response to stress or as part of the body's sympathetic nervous system activity. Both of these hormones are rapidly metabolized and excreted, with a half-life of just a few minutes.

Catecholamines are best measured in urine because their metabolites are excreted in urine and are easy to measure. Levels of epinephrine, norepinephrine, and their metabolites in urine can be measured through an enzyme-linked immunosorbent assay (ELISA).

The metabolites of catecholamines are also present in the serum, but catecholamines themselves are not stable in serum and are rapidly degraded. Therefore, measuring the metabolites of catecholamines in serum is more accurate than measuring the free catecholamines themselves.

Learn more about catecholamines: https://brainly.com/question/30417027

#SPJ11

show your calculations to determine the % ethanol by weight from this 1h nmr spectrum of an ethanol/water solution.

Answers

The % ethanol by weight in the solution can be determined using the 1H NMR spectrum.

How can the % ethanol by weight be determined from the 1H NMR spectrum?

To determine the % ethanol by weight from the 1H NMR spectrum of an ethanol/water solution, we need to analyze the relative peak areas of the ethanol and water signals. The peak areas are directly proportional to the number of protons contributing to each signal, which in turn corresponds to the relative concentration of each component in the solution.

First, we need to identify the characteristic peaks for ethanol and water in the 1H NMR spectrum. In the case of ethanol, the relevant peak appears as a singlet around 3.6-4.0 ppm. For water, the peak typically appears as a singlet at around 4.7-5.0 ppm.

Next, we measure the integrated peak areas for ethanol and water. The integration process determines the area under each peak, representing the relative number of protons contributing to that signal. This can be done using software or by manually measuring the peak areas with a ruler.

Once we have the integrated peak areas, we compare the areas of the ethanol and water peaks. The % ethanol by weight can be calculated using the following formula:

% Ethanol = (Peak Area of Ethanol / Peak Area of Water + Peak Area of Ethanol) * 100

By substituting the respective peak areas into the formula, we can calculate the % ethanol by weight in the solution.

Learn more about ethanol

brainly.com/question/18597444

#SPJ11

A 15. 20 g of nitrogen will react with 17. 37 g, 34. 74 g, or 43. 43 g of oxygen
to form three different compounds.

a)Calculate the mass of oxygen per gram of nitrogen in each compound.

b) How do the numbers in part (a) support the atomic theory?​

Answers

Answer:

To calculate the mass of oxygen per gram of nitrogen in each compound, we need to divide the mass of oxygen by the mass of nitrogen for each compound.

Compound 1:

Mass of nitrogen = 15.20 g

Mass of oxygen = 17.37 g

Oxygen per gram of nitrogen = 17.37 g / 15.20 g ≈ 1.14 g/g

Compound 2:

Mass of nitrogen = 15.20 g

Mass of oxygen = 34.74 g

Oxygen per gram of nitrogen = 34.74 g / 15.20 g ≈ 2.29 g/g

Compound 3:

Mass of nitrogen = 15.20 g

Mass of oxygen = 43.43 g

Oxygen per gram of nitrogen = 43.43 g / 15.20 g ≈ 2.86 g/g

Now, let's discuss how these numbers support the atomic theory.

The atomic theory proposes that elements are composed of individual particles called atoms. In a chemical reaction, atoms rearrange and combine to form new compounds. The ratios of the masses of elements involved in a reaction are consistent and can be expressed as whole numbers or simple ratios.

In this case, we observe that the ratios of oxygen to nitrogen in the three different compounds are not whole numbers but rather decimals. This supports the atomic theory as it indicates that the combining ratio of oxygen to nitrogen is not a simple whole number ratio. It suggests that atoms of oxygen and nitrogen combine in fixed proportions but not necessarily in simple whole number ratios.

Therefore, the numbers in part (a) support the atomic theory by demonstrating the consistent ratio of oxygen to nitrogen in each compound, even though the ratios are not whole numbers.

Explanation:

. Compare the length of the sand dollar spines to those of a regular echinoid. What is the primary reason why regular echinoids have spines? What is the function of the spines for irregular echinoids, such as the sand dollar? Regular echinoids: Irregular echinoids:

Answers

Regular echinoids have spines more than 100 mm long. The primary function of spines in regular echinoids is to deter predators. These spines provide defense against predators. Irregular echinoids, such as the sand dollar, have short spines that are less than 100 mm long. The primary function of spines in irregular echinoids is to burrow through the sand.

These spines help them move through the sand and protect themselves from damage and desiccation. Hence, these spines allow them to move across the seafloor and dig into the sand for protection or food.Another significant difference between regular echinoids and irregular echinoids is the body plan. Regular echinoids are more circular or oval-shaped and covered in long spines. Irregular echinoids are usually flattened, have shorter spines, and may have a different body shape.

To know more about primary visit:

https://brainly.com/question/29704537

#SPJ11

Enter a balanced chemical equation for the feentation of glucose (C6H12O6)(C6H12O6) by Clostridium pasteurianum in which the aqueous sugar reacts with water to fo 2 moles of aqueous acetic acid (CH3CO2H)(CH3CO2H), carbonic acid (H2CO3)(H2CO3), and hydrogen gas.

Answers

The balanced chemical equation for the fermentation of glucose (C6H12O6) by Clostridium pasteurianum is:

C6H12O6 + 2 H2O → 2 CH3CO2H + H2CO3 + 2 H2

This equation represents the conversion of glucose and water into acetic acid, carbonic acid, and hydrogen gas during the fermentation process.

The balanced chemical equation for the fermentation of glucose (C6H12O6) by Clostridium pasteurianum, in which the aqueous sugar reacts with water to form 2 moles of aqueous acetic acid (CH3CO2H), carbonic acid (H2CO3), and hydrogen gas is:  

C6H12O6 + H2O → 2CH3COOH + H2CO3 + 2H2

Where, C6H12O6 is glucose

H2O is water

CH3COOH is aqueous acetic acid

H2CO3 is carbonic acid

H2 is hydrogen gas

How does this equation is obtained?

The fermentation of glucose is an exothermic process that occurs in the absence of oxygen. The fermentation of glucose by Clostridium pasteurianum is an example of this type of reaction. The balanced chemical equation for this reaction is obtained by following the steps given below:

Step 1: Write the unbalanced chemical equation for the reaction.

C6H12O6 + H2O → CH3COOH + H2CO3 + H2

Step 2: Balance the equation by adding coefficients in front of the chemical formulas to make the number of atoms of each element the same on both sides of the equation.

C6H12O6 + H2O → 2CH3COOH + H2CO3 + 2H2

Learn more about Balanced Chemical Equation here:

https://brainly.com/question/29130807

#SPJ11

What mass of oxygen is needed for the complete combustion of
7.50×10−3 gg of methane?
Express your answer with the appropriate units.

Answers

The mass of oxygen needed for the complete combustion of 7.50 × 10⁻³ g of methane is 23.0 g.

The balanced chemical equation for the complete combustion of methane (CH₄) is:

CH₄ + 2O₂ → CO₂ + 2H₂O

From the equation, we can see that 1 mole of methane reacts with 2 moles of oxygen to produce 1 mole of carbon dioxide and 2 moles of water. We need to calculate the mass of oxygen required to react with 7.50 × 10⁻³ g of methane.

The molar mass of methane (CH₄) is 16.04 g/mol, and since 1 mole of methane reacts with 2 moles of oxygen, we can calculate the moles of methane:

moles of CH₄ = mass of CH₄ / molar mass of CH₄

= 7.50 × 10⁻³ g / 16.04 g/mol

Since the stoichiometric ratio between methane and oxygen is 1:2, the moles of oxygen required will be twice the moles of methane:

moles of O₂ = 2 × moles of CH₄

Finally, we can calculate the mass of oxygen using the moles of oxygen and the molar mass of oxygen (32.00 g/mol):

mass of O₂ = moles of O₂ × molar mass of O₂

= 2 × moles of CH₄ × 32.00 g/mol

Plugging in the values, we find the mass of oxygen to be 23.0 g.

learn more about oxygen here

https://brainly.com/question/2272415

#SPJ11

For each of the molecules below, deteine what molecular shape you would expect a. HCN b. PCl 3

Answers

The molecular shape are (a). The molecular shape of HCN is linear , (b). The molecular shape of [tex]PCl_3[/tex]is trigonal pyramidal.

a. For HCN (hydrogen cyanide), the molecular shape is linear. It consists of a carbon atom bonded to a hydrogen atom and a nitrogen atom with a triple bond.

The arrangement of atoms in a straight line gives it a linear molecular shape.

b. For [tex]PCl_3[/tex](phosphorus trichloride), the molecular shape is trigonal pyramidal. It consists of a central phosphorus atom bonded to three chlorine atoms.

The three chlorine atoms form a pyramid shape around the phosphorus atom, with the lone pair of electrons occupying the fourth position, giving it a trigonal pyramidal molecular shape.

In summary, HCN has a linear shape, while [tex]PCl_3[/tex]has a trigonal pyramidal shape.

These shapes are determined by the arrangement of atoms and the presence of lone pairs, which dictate the molecular geometry of the molecules.

To know more about molecular shape refer here

https://brainly.com/question/31826716#

#SPJ11

Which elements have a stable electron configuration?.

Answers

The elements that have a stable electron configuration are typically the noble gases.

The noble gases include helium (He), neon (Ne), argon (Ar), krypton (Kr), xenon (Xe), and radon (Rn). These elements have completely filled electron shells, which makes them highly stable and unreactive.

Electron configuration refers to the arrangement of electrons in an atom. Each electron shell can hold a certain number of electrons. The first shell can hold up to 2 electrons, the second shell can hold up to 8 electrons, and so on.

For example, helium (He) has a stable electron configuration of 2 electrons in its first shell. Neon (Ne) has a stable electron configuration of 2 electrons in its first shell and 8 electrons in its second shell.

The stability of noble gases is due to their full valence electron shells. Valence electrons are the electrons in the outermost shell of an atom. Noble gases have a full complement of valence electrons, making them less likely to gain or lose electrons in chemical reactions.

In contrast, other elements in the periodic table have partially filled electron shells and are more likely to gain or lose electrons to achieve a stable electron configuration. These elements are usually more reactive than noble gases.

In summary, the elements that have a stable electron configuration are the noble gases, which have completely filled electron shells. These elements include helium, neon, argon, krypton, xenon, and radon. Their stable electron configurations make them unreactive compared to other elements.

Learn more about Electron configuration here: https://brainly.com/question/26084288

#SPJ11

For each of the following write whether they are organic or inorganic molecules: e. water. f. carbon dioxide (CO2​) g. fats h. 'sugar i. salts j. protein I k. O2​ gas I. DNA

Answers

For the following molecules:

E. Water: inorganic (H₂O), f. Carbon dioxide (CO₂): inorganic, g. Fats: organic (C, H, O).

h. Sugar: organic (C, H, O).

i. Salts: inorganic.

j. Protein: organic (C, H, O, N, S).

k. Oxygen gas (O₂): inorganic.

l. DNA: organic (C, H, O, N, P).

E- . water: Water (H₂O) is an inorganic molecule composed of two hydrogen atoms (H) bonded to one oxygen atom (O). It does not contain carbon and is classified as inorganic.

f. carbon dioxide (CO₂): Carbon dioxide is an inorganic molecule consisting of one carbon atom (C) bonded to two oxygen atoms (O). It does not contain hydrogen and is classified as inorganic.

g. fats: Fats, also known as triglycerides, are organic molecules composed of carbon (C), hydrogen (H), and oxygen (O). They consist of glycerol and fatty acids and are essential components of living organisms.

h. sugar: Sugar is a broad term that can refer to various organic molecules, such as glucose, fructose, and sucrose. These molecules are composed of carbon (C), hydrogen (H), and oxygen (O) atoms. Sugars are vital sources of energy in living organisms.

i. salts: Salts are inorganic compounds composed of ions bonded together through ionic bonds. They do not contain carbon-hydrogen (C-H) bonds and are classified as inorganic molecules. Examples include sodium chloride (NaCl) and calcium carbonate (CaCO₃).

j. protein: Proteins are organic macromolecules composed of amino acids linked together by peptide bonds. They contain carbon (C), hydrogen (H), oxygen (O), nitrogen (N), and sometimes sulfur (S). Proteins play crucial roles in various biological processes.

k. O₂ gas: Oxygen gas (O₂) is an inorganic molecule consisting of two oxygen atoms bonded together. It does not contain carbon and is classified as inorganic.

l. DNA: DNA (deoxyribonucleic acid) is an organic molecule that contains the genetic instructions for the development and functioning of living organisms. It consists of nucleotides, which are composed of carbon (C), hydrogen (H), oxygen (O), nitrogen (N), and phosphorus (P). DNA is a fundamental molecule in genetics and heredity.

learn more about Inorganic here:l

https://brainly.com/question/2169750

#SPJ11

A B C D Rolf added 20 g of solute to 100 g of water and mixed the solution. Rolf added 10 g of solute to 100 g of water and mixed the solution. Rolf added 65 g of solute to 100g of water, mixed the solution, and then heated the solution. Rolf added 7 g of solute to 100 g of water, mixed the solution, and then heated the solution. Which solution is unsaturated? O Solution A O Solution B O Solution C Solution D The solute in solution A has a solubility of 37 g/100 g H₂O at 20°C. The solute in solution B has a solubility of 10 g/100 g H₂O at 20°C. The solute in solution C has a solubility of 32 g/100 g H₂O at 20°C The solute in solution D has a solubility of 4 g/100 g H₂O at 20°C.​

Answers

From the arrangement of the options,  Solution A and Solution D are unsaturated.

What is solubility?

In a saturated solution, the rate at which the solute dissolves equals the rate at which it precipitates or crystallizes. This indicates that under the existing circumstances, no more solute can be dissolved in the solvent.

Solution A:

Amount of solute added: 20 g

Solubility of solute: 37 g/100 g H₂O

Since the amount of solute added is less than the solubility, Solution A is unsaturated.

Solution D:

Amount of solute added: 7 g

Solubility of solute: 4 g/100 g H₂O

The amount of solute added is less than the solubility, so Solution D is unsaturated.

Learn more about solubility:https://brainly.com/question/31493083

#SPJ1

Recall that the threshold frequency (νthreshold) for a metal is related it the metal's work function (Φ) by Eminimum= Φ = hνthreshold. For a particular metal, Φ is 5.00×10-19 J. What is the longest wavelength of electromagnetic radiation that can eject an electron from the surface of a piece of the metal? What is the nm?

Answers

The given formula is Eminimum= Φ = hνthreshold where Eminimum represents the minimum energy required to eject an electron from a metal surface, Φ is the work function of the metal, h is Planck's constant and νthreshold is the threshold frequency of the metal.

Given, Φ = 5.00 × 10⁻¹⁹ J. Therefore, Eminimum = Φ = 5.00 × 10⁻¹⁹ J.

The energy of a photon, E can be calculated from E = hν where h is Planck's constant and ν is the frequency of the photon.

The minimum energy required to eject an electron from the surface of a metal is the same as the energy of a photon that has a frequency equal to the threshold frequency. For a photon to be able to eject an electron from the surface of the metal, its energy must be greater than or equal to the minimum energy required to eject an electron.

The frequency of a photon can be related to its wavelength (λ) using the formula c = λν where c is the speed of light. Rearranging this formula gives ν = c/λ.

Substituting ν into the formula E = hν gives E = hc/λ. Therefore, the minimum wavelength (λmin) of the electromagnetic radiation required to eject an electron is given by λmin = hc/Eminimum = hc/Φ.

The longest wavelength (λmax) of electromagnetic radiation that can eject an electron from the surface of a piece of metal is equal to twice the minimum wavelength, i.e., λmax = 2λmin. Therefore,

λmax = 2hc/Φ

Substituting the values of h, c and Φ, we get;

λmax = (2 × 6.626 × 10⁻³⁴ J s × 2.998 × 10⁸ m s⁻¹) / (5.00 × 10⁻¹⁹ J)

λmax = 2.66 × 10⁻⁷ m

Converting this value to nanometers gives,λmax = 266 nm

Therefore, the answer is 266 nm.

Learn more about electromagnetic radiation: https://brainly.com/question/29646884

#SPJ11

From the response list, seleet the correct number of eonstitutional isemers that exist for dichlorocyclopentanes. two three four five Question 21 The correct IUPAC name for is 2-methylpentene 2-methyl-3,4-pentene 2-methyl-3-pentene 4-methyl-2-pentene

Answers

From the response list, the correct number of constitutional isomers that exist for dichlorocyclopentanes are 5.Dichlorocyclopentanes:These are a class of organic compounds with formula C5H8Cl2.

The name "dichlorocyclopentane" describes a class of organic compounds that consists of a cyclopentane core with two chlorine atoms on non-adjacent carbon atoms.In organic chemistry, constitutional isomers are molecules with the same molecular formula but with different connections among their atoms. The term “constitutional isomer” refers to these isomers. Here, dichlorocyclopentanes, with the molecular formula C5H8Cl2, can be represented by the following five isomers:

1,2-Dichlorocyclopentane1,3-Dichlorocyclopentane1,4-Dichlorocyclopentane1,2-Dichlorocyclopent-3-ene1,3-Dichlorocyclopent-2-eneThus, the correct answer is option (d) five.

Q21) IUPAC (International Union of Pure and Applied Chemistry) is the organization that determines the nomenclature of organic compounds. The correct IUPAC name for 2-methylpentene is 4-methyl-2-pentene. This is because the double bond starts at the 2nd carbon, and the substituent methyl group is on the 4th carbon.

To know more about IUPAC visit-

brainly.com/question/16631447

#SPJ11

The correct number of constitutional isomers that exist for dichlorocyclopentanes is four. And the correct IUPAC name for 2-methylpentene is 2-methyl-3-pentene.

What are constitutional isomers

The constitutional isomers of dichlorocyclopentanes refer to different structural arrangements of molecules with the same molecular formula (C₅H₈Cl₂), but with different connectivity or bonding arrangements.

In the case of dichlorocyclopentanes, there are four possible constitutional isomers, each with a unique arrangement of the chlorine atoms on the cyclopentane ring.

Read more on Isomers here https://brainly.com/question/2705480

#SPJ4

Calculate the amount of heat needed to boil 81.2g of ethanol ( CH3CH2OH ), beginning from a temperature of 31.4°C . Be sure your answer has a unit symbol and the correct number of significant digitsplease put the correct number of significant digits

Answers

The amount of heat needed to boil 81.2 g of ethanol from a temperature of 31.4°C is 9.19 kJ.

Specific heat is a physical property that quantifies the amount of heat energy required to raise the temperature of a substance by a certain amount. It is defined as the amount of heat energy needed to raise the temperature of one unit mass of a substance by one degree Celsius (or one Kelvin).

The specific heat capacity (often simply called specific heat) is expressed in units of joules per gram per degree Celsius (J/g°C) or joules per gram per Kelvin (J/gK). It represents the heat energy required to raise the temperature of one gram of the substance by one degree Celsius or one Kelvin.

Specific heat is unique to each substance and depends on its molecular structure, composition, and physical state. Substances with higher specific heat require more heat energy to raise their temperature compared to substances with lower specific heat.

The heat required to raise the temperature of the ethanol is given as -

Q = m × C × ΔT

Where:

Q is the heat (in joules),

m is the mass of ethanol (in grams),

C is the specific heat capacity of ethanol (2.44 J/g°C), and

ΔT is the change in temperature (in °C).

Q = 81.2 g × 2.44 J/g°C × (boiling point - 31.4°C)

Q = 81.2 g × 2.44 J/g°C × (78.4°C - 31.4°C)

= 81.2 g × 2.44 J/g°C × 47.0°C

= 9185.53 J

Q = 9.19 kJ

Learn more about Specific heat, here:

https://brainly.com/question/31608647

#SPJ4

An unknown element was collected during a chemical reaction. The sample of the unknown element with a mass of 4.00 g was then allowed to react with excess oxygen, foing an oxide with a mass of 6.63 g. The oxide contains an equal amount (in mol) of both elements. Identify the unknown element.

Answers

The molar mass of X being 9.66 g/mol implies that X is Copper (Cu). Hence, the unknown element is Copper (Cu). The unknown element that forms an oxide containing an equal amount (in mol) of both elements is Copper (Cu).

Stoichiometry is the quantitative relation between the reactants and products in a balanced chemical equation in a chemical reaction. It also involves the calculation of the amount of reactants and products in a chemical reaction.Here, we need to identify the unknown element from the given information and we will be using stoichiometry to solve the problem.

Given:

Mass of unknown element = 4.00 g

Mass of oxide = 6.63 g

The oxide contains an equal amount (in mol) of both elements.

Assuming the formula of the oxide is XO

Moles of oxygen used = Mass of oxide / Molar mass of oxygen

Molar mass of oxygen = 16.00 g/mol

Moles of oxygen used = 6.63 g / 16.00 g/mol

= 0.414 mol

From the balanced chemical equation, we can conclude that:

1 mol of X requires 1 mol of oxygen to form XO

Moles of X present = Moles of oxygen used (Since oxide contains an equal amount (in mol) of both elements)

Moles of X present = 0.414 mol

Mass of X present = Moles of X present × Molar mass of X

Mass of X present = 0.414 mol × Molar mass of X

We do not know the molar mass of X, therefore let us assume it as "m".

Mass of X present = 0.414 × m

Mass of X present = 4.00 g (Given)

0.414 × m = 4.00 gm = 4.00 g / 0.414m = 9.66

Therefore, the molar mass of X is 9.66 g/mol.

To know more about the molar mass, visit:

https://brainly.com/question/30951062

#SPJ11

liquid nitrogen at 77 k is stored in an insulated spherical vessel that is vented to the atmosphere. the container is made of a thin-walled materia

Answers

The liquid nitrogen boil off for surroundings at 25° C and with a convective coefficient of 18 W/m²·K at the outside surface of the insulation is 0.00607 kg/s.

To determine the boil off of liquid nitrogen, we need to consider the heat transfer from the liquid nitrogen to the surroundings. The heat transfer occurs through conduction and convection.

First, let's calculate the surface area of the container. The outside surface area of a sphere is given by:

A = 4πr²

where r is the radius of the sphere. Since the outside diameter is given as 0.5m, the radius is 0.25m. Plugging in the values, we get:

A = 4π(0.25)² = 0.785 m²

Next, let's calculate the heat transfer through conduction. The rate of heat transfer through a material is given by:

Q = kA(ΔT)/d

where Q is the heat transfer rate, k is the thermal conductivity of the material, A is the surface area, ΔT is the temperature difference, and d is the thickness of the insulation. Plugging in the values, we get:

Q_conduction = (0.002 W/m·K)(0.785 m²)(77 K - 25 K)/(0.025 m) = 5.96 W

Now, let's calculate the heat transfer through convection. The rate of heat transfer through convection is given by:

Q = hA(ΔT)

where Q is the heat transfer rate, h is the convective coefficient, A is the surface area, and ΔT is the temperature difference. Plugging in the values, we get:

Q_convection = (18 W/m²·K)(0.785 m²)(77 K - 25 K) = 770.31

The total heat transfer rate is the sum of the conduction and convection rates:

Q_total = Q_conduction + Q_convection = 5.96 W + 770.31 W = 776.27 W

Finally, let's calculate the boil off rate of the liquid nitrogen. The heat required to vaporize a certain mass of liquid nitrogen is given by its latent heat. The boil off rate can be calculated using the formula:

Boil off rate = Q_total / (latent heat of nitrogen × density of liquid nitrogen)

Plugging in the values, we get:

Boil off rate = 776.27 W / (200 kJ/kg × 804 kg/m²) = 0.00607 kg/s

Therefore, the liquid nitrogen boil off rate is approximately 0.00607 kg/s.

Your question is incomplete but most probably your full question was

Liquid nitrogen at 77 K is stored in an insulated spherical container that is vented to the atmosphere. The container is made of a thin-walled material with an outside diameter of 0.5m; 25 mm of insulation (k=0.002 W/m·K) covers its outside surface. The latent heat of nitrogen is 200 kJ/kg; its density in the liquid phase is 804 kg/m². For surroundings at 25° C and with a convective coefficient of 18 W/m²·K at the outside surface of the insulation, what will be the liquid nitrogen boil off?

Learn more about liquid nitrogen: https://brainly.com/question/4492682

#SPJ11

Draw the Lewis structures for the important resonance forms of [CH2OH]+

Answers

The Lewis structure for the important resonance forms of [CH2OH]+ can be represented as follows:

Resonance Form 1:

    H

    |

H - C - O+

    |

    H

Resonance Form 2:

    H

    |

H - C = O

    |

    H+

In the first resonance form, the positive charge is located on the oxygen atom, while in the second resonance form, the positive charge is located on the carbon atom. These resonance forms indicate the delocalization of the positive charge between the carbon and oxygen atoms.

It's important to note that resonance structures are not individual molecules but different representations of the same compound, indicating the distribution of electrons and charge within the molecule. The actual structure of [CH2OH]+ is a hybrid of these resonance forms, with the positive charge being delocalized between the carbon and oxygen atoms.

Understanding the resonance forms and their hybrid nature helps in understanding the reactivity and stability of the [CH2OH]+ ion and similar compounds. Resonance forms play a crucial role in explaining the properties and behavior of molecules in organic chemistry.

Learn more about Lewis structure

brainly.com/question/4144781

#SPJ11

according to the techniques manual (technique 16), what are the four criteria that must be satisfied in order to successfully use sublimation to purify an organic compound.

Answers

Sublimation is a purification technique that is widely used in the chemical industry. It is a process where a solid compound goes directly into the vapor phase when heated. The technique can be used to purify compounds such as camphor, naphthalene, anthracene, and benzoic acid.

The technique is particularly useful when the compound is heat-stable, has a high vapor pressure, and has a high molecular weight. The sublimation technique is highly selective and helps in removing unwanted impurities in a chemical compound. To use sublimation as a purification technique, four criteria must be met.

They are as follows:

1. The compound to be purified must be stable at the temperature used in the sublimation process. The temperature must not be so high that the compound undergoes decomposition.

2. The vapor pressure of the compound should be high enough to allow the sublimation process to occur.

3. The impurities present in the compound must have a lower vapor pressure than the compound to be purified. This is because, during the sublimation process, the compound with a higher vapor pressure moves to the vapor phase, while the impurities remain behind.

4. The impurities present in the compound should be decomposed or destroyed at the temperature used in the sublimation process. This is to ensure that the impurities do not get carried over into the final product.

The sublimation process is highly efficient in purifying organic compounds. It can be carried out under vacuum conditions to reduce the temperature required for the sublimation process. Additionally, the sublimation process is eco-friendly as it does not use any solvents or reagents. The sublimation technique is, therefore, a highly recommended technique for the purification of organic compounds.

Learn more about organic compounds from the given link:

https://brainly.com/question/13508986

#SPJ11

Match the SI metric prefix with the correct symbols. Answers may be used once, more than once or not at all milli A. U centi B. M kilo C. C micro D. K mega E. C F. P G. K H. m

Answers

SI metric prefixes are standardized systems of prefixes used to denote multiples of units of measurements that are in use in all branches of science, technology, and commerce.

The following are some of the SI metric prefixes and their corresponding symbols:Milli: mCenti: cMicro: μKilo: kMega: MTo know more about them, let us look into them in detail :Milli: This prefix indicates one-thousandth of the unit. It has the symbol "m." For example, 1 milliliter is equal to 0.001 liters.Centi: This prefix indicates one-hundredth of the unit. It has the symbol "c." For example, 1 centimeter is equal to 0.01 meters .

Micro: This prefix indicates one-millionth of the unit. It has the symbol "μ." For example, 1 micrometer is equal to 0.000001 meters.Kilo: This prefix indicates one-thousand times the unit. It has the symbol "k." For example, 1 kilometer is equal to 1000 meters.Mega: This prefix indicates one-million times the unit. It has the symbol "M." For example, 1 megabyte is equal to 1 million bytes.

To know more about  metric prefixes visit:

brainly.com/question/17331856

#SPJ11

The proper handling procedures for substances such as chemical solvents are typically outlined in which of the following options?
A) Toxic Chemical Safety Procedure (TCSP)
B) Dangerous and Hazardous Waste Disposal Sheet (DHWDS)
C) Environmental Chemical Hazard Sheet (ECHS)
D) Material Safety Data Sheet (MSDS)

Answers

The correct option is D), Material Safety Data Sheet (MSDS)

The proper handling procedures for substances such as chemical solvents are typically outlined in the Material Safety Data Sheet (MSDS). MSDS is a comprehensive document prepared and provided by the manufacturer or supplier of hazardous chemicals to inform employees and the public about the properties of the chemicals, the associated hazards, and the safety measures necessary for their use, handling, storage, and transport. It contains information on the chemical's physical and chemical properties, health hazards, reactivity, environmental hazards, protective equipment, safe handling practices, and emergency procedures. The MSDS is a critical component of an organization's chemical management program as it helps reduce the risk of accidents, incidents, and injuries from exposure to hazardous chemicals. The information in the MSDS is presented in a standardized format to ensure consistency in the presentation of information across different products and manufacturers. The MSDS should be readily available to workers who use or handle hazardous chemicals, and it should be reviewed and updated regularly to reflect any changes in the properties or hazards of the chemical.

Learn more about Material Safety Data Sheet (MSDS)

https://brainly.com/question/33495323

#SPJ11

Question 4: The periodic table can be used to count the protons, electrons, and neutrons of atoms using the atomic mass and atomic number. Note: the periodic table can be used to count the protons, electrons, and neutrons of isotopes and of ions of atoms as well. For this question, provide the number of electrons, neutrons, and protons for the following: The nitrogen atom N The nitrogen isotope N−16 The nitrogen ion, nitride, N3−

Answers

Nitrogen Atom has 7 electrons, 7 neutrons and 7 protons, Nitrogen Isotope N-16 has 7 electrons, 7 protons and 9 neutrons, and Nitride, N3- has, 10 electrons, 7 protons and the number of neutrons same as its parent isotope.

The periodic table provides useful information about the atoms in a chemical element. Atomic number, symbol, and atomic mass are some of the most important information found on the periodic table.

The atomic number of an element refers to the number of protons present in the element's nucleus. The atomic mass of an element is the sum of its protons and neutrons.

The periodic table can be used to determine the number of electrons, protons, and neutrons in an atom or ion of an element
Nitrogen Atom, N
Nitrogen has an atomic number of 7, meaning that it has seven protons and seven electrons in its neutral state. Nitrogen has an atomic mass of 14, which is the sum of its seven protons and seven neutrons.
Nitrogen Isotope, N-16
The nitrogen-16 isotope has an atomic number of 7, meaning that it has seven protons and seven electrons, which makes it similar to other nitrogen isotopes. Nitrogen-16 has an atomic mass of 16, which is the sum of its seven protons and nine neutrons.
Nitrogen Ion, Nitride, N3-
The nitride ion is an anion, meaning that it has more electrons than protons. Nitrogen has an atomic number of 7, meaning that it has seven protons and seven electrons. Since the nitride ion has three extra electrons, it has ten electrons in total.

The number of protons in an ion is the same as the number of protons in its neutral atom. Therefore, nitride has seven protons. In general, the number of neutrons in an ion depends on the isotope from which it is derived.

In summary, the number of electrons, neutrons, and protons in an element can be determined using the periodic table. Nitrogen atom, nitrogen isotope, and nitride ion have different electron, neutron, and proton numbers depending on their states.

The question should be:
Question 4: The periodic table can be used to count the protons, electrons, and neutrons of atoms using the atomic mass and atomic number. Note: the periodic table can be used to count the protons, electrons, and neutrons of isotopes and of ions of atoms as well. For this question, provide the number of electrons, neutrons, and protons for the following: The nitrogen atom N, The nitrogen isotope N−16, The nitrogen ion, nitride, N3⁻.

Learn more about electrons at: https://brainly.com/question/860094

#SPJ11

For a certain reaction, the rate constant triples when the
temperature is increased from T1 of 250 K to T2 of 370 K. Determine
the activation energy. (R=8.315J/mol K)

Answers

The activation energy of the reaction from the calculation is 6.87 kJ/mol.

What is the rate constant?

The rate constant is influenced by several factors, including the nature of the reactants, temperature, activation energy, and presence of catalysts. It provides important information about the kinetics of a chemical reaction and is used to predict reaction rates and understand reaction mechanisms.

We have that;

ln(k2/k1) = -Ea/R (1/T2 - 1/T1)

But k2 = 3k1

ln3 = -Ea/8.315(1/370 - 1/250)

ln3 = -Ea/8.315(0.0027 - 0.004)

ln3 = 0.00016Ea

Ea = 6.87 kJ/mol

Learn more about rate constant:https://brainly.com/question/20305922

#SPJ4

2. Based on the concepts discussed in lecture and the pre-lab (not your data), how should each of the parameters below effect evaporation rate, if the types of inter-molecular forces involved are simi

Answers

The evaporation rate of a substance is influenced by several parameters, assuming the types of intermolecular forces involved are similar. Firstly, the surface area of the liquid directly affects evaporation rate.

A larger surface area leads to increased evaporation because more molecules are exposed to the air. Temperature also plays a crucial role, as higher temperatures provide greater kinetic energy to the molecules, increasing their evaporation rate. The vapor pressure of the substance is another significant parameter. Higher vapor pressure results in faster evaporation since more molecules can escape from the liquid phase into the vapor phase.

Furthermore, airflow or ventilation in the surrounding environment can enhance evaporation by removing the saturated vapor near the liquid surface, allowing more molecules to escape. Lastly, the presence of impurities or solutes in the liquid can reduce the evaporation rate by interfering with the intermolecular forces and making it more difficult for molecules to escape.

To know more about molecules visit:

https://brainly.com/question/32298217

#SPJ11

Other Questions
Given average variable cost of $3.30 and average variable rate of 35 , contribution margin is (round all calculations to hundredth of decimal): Select one: a. $1.78 b. $6.13 c. $5.08 d. $9.43 Think of a scenario where data is kept in a single table as a flat file and is unnormalised (0NF): show an example of your scenario by making the table (cannot use any example of tables covered in the lectures or from your textbook) with few records. Your example has to be your own. Show and describe the type of dependencies in your chosen table through a dependency diagram. After normalising to 3NF, create the appropriate relational diagram (GRD). A nurse is caring for a client who has a new prescription for amphetamine sulfate. The nurse should monitor the client for which of the following adverse effects?-hypotension-tinnitus-tachycardia-bronchospasm An investor can design a risky portfolio based on two stocks, S and B. Stock S has an expected return of 14% and a standard deviation of return of 32%. Stock B has an expected return of 12% and a standard deviation of return of 23%. The correlation coefficient between the returns of S and B is -0.58. The risk-free rate of return is 5%. The proportion of the optimal risky portfolio that should be invested in stocks S and B are approximately ______ Solve each of the following initial value problems and plot the solutions for several values of yo. Then describe in a few words how the solutions resemble, and differ from, each other. a. dy/dt=-y+5, y(0) = 30 b. dy/dt=-2y+5, y(0) = yo c. dy/dt=-2y+10, y(0) = yo Salmonella bacteria, found on almost all chicken and eggs, grow rapidly in a nice warm place. If just a few hundred salmonella bacteria are left on the cutting board when a chicken is cut up, andthey get into the potato salad, the population begins compounding. Suppose the number present in the potato salad after t hours is given by f(t)=500.23.a. If the potato salad is left out on the table, how many bacteria are present 1 hour later? b. How many were present initially?c. How often do the bacteria double?d. How quickly will the number of bacteria increase to 256,000? Change in CA=500 and change in Cl=570, what implicafions on cash fiows we would have: Select one: a. decrease by 70 b. increase by 70 c. increase by 570 d. increase by 1070 You are putting 32 plums into bags. You want 4 plums in each bagand you have already filled 2 bags..How many bags do you still needto fill? n the context of his needs-hierarchy theory, Maslow proposed a declining percentage of satisfaction for each need.Truefalse Prince Electronics, a manufacturer of consumer electronic goods, has five distribution centers in different regions of the country. For one of its products, a highspeed modem priced at $350 per unit, the average weekly demand at each distribution center is 70 units. Average shipment size to each distribution center is 450 units, and average lead time for delivery is 3 weeks. Each distribution center carries 3 weeks' supply as safety stock but holds no anticipation inventory. a. On average, how many dollars of pipeline inventory will be in transit to each distribution center? $ (Enter your response as an integer.) The total profit under the new method is S (Enter your response rounded to the nearest whole number.) if it takes 42.9 newtons of force to accelerate an object at 3.2 m/s2, what would be the mass of the object? Where do the 24,000,000 and 25,800,000 come from in part B?Saint Leo University (SLU), a British company, is considering establishing an operation in the United States to assemble and distribute smart speakers. The initial investment is estimated to be 25,000,000 British pounds (GBP), which is equivalent to 30,000,000 U.S. dollars (USD) at the current exchange rate. Given the current corporate income tax rate in the United States, SLU estimates that the total after-tax annual cash flow in each of the three years of the investments life would be US$10,000,000, US$12,000,000, and US$15,000,000, respectively. However, the U.S. national legislature is considering a reduction in the corporate income tax rate that would go into effect in the second year of the investments life and would result in the following total annual cash flows: US$10,000,000 in year 1, US$14,000,000 in year 2, and US$18,000,000 in year 3. SLU estimates the probability of the tax rate reduction occurring at 50 percent. SLU uses a discount rate of 12 percent in evaluating potential capital investments. Present value factors at 12 percent are as follows: period PV factor 1 .893 2 .797 3 .712 The U.S. operation will distribute 100 percent of its after-tax annual cash flow to SLU as a dividend at the end of each year. The terminal value of the investment at the end of three years is estimated to be US$25,000,000. The U.S. withholding tax on dividends is 5 percent; repatriation of the investments terminal value will not be subject to U.S. withholding tax. Neither the dividends nor the terminal value received from the U.S. investment will be subject to British income tax. Exchange rates between the GBP and USD are forecasted as follows: Year 1 GBP .74 = USD 1.00 Year 2 GBP .70 = USD 1.00 Year 3 GBP .60= USD 1.00 Question 1. Determine the expected net present value of the potential U.S. investment from a project perspective. 2. Determine the expected net present value of the potential U.S. investment from a parent company perspective. Where do the 24,000,000 and 25,800,000 come from in part B? Please provide the details of the work. Thank you in advance! The fourth term of an arithmetic sequence or progression is x - 3 , and the 8th term is x + 13. If the sum of the first nine terms is 252, vin Lin wants to buy a used car that costs $9,780, A10% down payment is required. (a) The used car deaier offered him a four-year add-on interest loan at 7% annual interest. Find the monthly payment. (Round your answer to the nearest cent.) 3 (b) Find the APR of the dealer's loan, Round to the nearest hundredth of 1%. X (c) His bank offered him a four-year simple interest amortized loan at 9.2% interest, with no fees, Find the APR, without making any calculations; x o (d) Which loan is better for him? Use the solutions to parts (b) and (c) to answer, No calculations are required. The bank's loan is better. The car dealer's ioan is better. An aqueous solution is made by dissolving 16.3grams of nickel(II) acetate in449 grams of water.The molality of nickel(II) acetate in the solutionis The magnitude of the poynting vector of a planar electromagnetic wave has an average value of 0. 324 w/m2. What is the maximum value of the magnetic field in the wave?. collaborative crm provides all the following customer communication enhancements except __________. a. Better understanding of customer historyb. Better customer service from any touch pointc. Reduced communication barriersd. Better understanding of customer current needse. Less customer interaction with the company Rebecca and you are on the Marketing team for "Juju on that Beat", a relatively new urban-themed clothing line. After the successful launch of this new brand, the marketers have conducted consumer research to assess how the brand is doing. The new brand is doing well, and target consumers express a lot of satisfaction with the product once they try it. However, the brand name does not show up in any recall checks when the marketers ask consumers to come up with urban-themed apparel brand names. Rebecca, the Brand manager, is very surprised by this finding and thinks that the research is flawed. "How can a consumer express satisfaction with a brand, and yet not recall the brand name when asked?" she asks. You, the Consumer Insights manager, is nonplussed. You suggest that it is not at all surprising and the research is not flawed. This is because you know that consumers do not store brand information in long-term memory, unless spreading activation takes place. Which of the following are not factors that can drive spreading activation to strengthen long-term memory? Write a function reverse that takes a string as argument and return its reverseWrite a program that calls the function reverse print out the reverse of the following string:"Superman sings in the shower."Part2:Write a program that asks the user for a phrase.Determine whether the supplied phrase is a palindrome (a phrase that reads the same backwards and forwards)Example:"Murder for a jar of red rum." is a palindrome"Too bad--I hid a boot." is a palindrome"Try tbest yrt" is not a palindrome_______________________Sample. run___________________________________Enter a phrase: Murder for a jar of red rum."Murder for a jar of red rum." is a palindromeEnter a phrase: Try tbest yrt"Try tbest yrt" is not a palindromeNote: Use function reverse of Problem#1 Which of the following will you select as X in the series of clicks to circle invalid data in a worksheet: Data tab > Data Tools group > Arrow next to X > Circle Invalid Data? a) What-If Analysis b) Data Validation c) Remove Duplicates d) Consolidate worksheet data