A certain heat pump produces 200 kW of heating for a 293 K heated zone while only using 75 kW of power and a heat source at 273 K. Calculate the COP of this device as well as the theoretical maximum COP

Answer:

To answer this question we assumed that the area units and the thickness units are given in inches.

The number of atoms of lead required is 1.73x10²³.    

Explanation:

To find the number of atoms of lead we need to find first the volume of the plate:

[tex] V = A*t [/tex]

Where:

A: is the surface area = 160

t: is the thickness = 0.002

Assuming that the units given above are in inches we proceed to calculate the volume:

[tex]V = A*t = 160 in^{2}*0.002 in = 0.32 in^{3}*(\frac{2.54 cm}{1 in})^{3} = 5.24 cm^{3}[/tex]    

Now, using the density we can find the mass:

[tex] m = d*V = 11.36 g/cm^{3}*5.24 cm^{3} = 59.5 g [/tex]

Finally, with the Avogadros number ([tex]N_{A}[/tex]) and with the atomic mass (A) we can find the number of atoms (N):

[tex] N = \frac{m*N_{A}}{A} = \frac{59.5 g*6.022 \cdot 10^{23} atoms/mol}{207.19 g/mol} = 1.73 \cdot 10^{23} atoms [/tex]    

Hence, the number of atoms of lead required is 1.73x10²³.

I hope it helps you!

Answer:

height ≈ 60.60 m

Explanation:

The surveyor is trying to find the height of the hill . He takes a sight on the top of the hill and finds the angle of elevation is 40°. The distance from the hill where he measured the angle of elevation of 40° is not known.

Now he moves 150 m on level ground directly away from the hill and take a second sight from this point and measures the angle of elevation as 22°. This illustration forms a right angle triangle. The opposite side of the triangle is the height of the hill. The adjacent side of the triangle which is 150 m is the distance on level ground directly away from the hill.

Using tangential ratio,

tan 22° = opposite/adjacent

tan 22° = h/150

h = 150 × tan 22°

h = 150 × 0.40402622583

h = 60.6039338753

height ≈ 60.60 m

Answer:

In consolidated AB Co 300 shares.

Explanation:

Consolidation is a process in which two different organizations are united. In this question A Co and B Co are consolidated and a new Co names AB Co is formed. The shares of both the companies will be combined and their total share capital will be increased.

Mathematical modeling aids in technological design by simulating how proposed system might behave. The correct option is 2.

Mathematical modelling describes a real world problem in mathematical terms or in the form of equations. This makes an engineer to discover new features about the problem and designer to alter his design for better function and output.

Mathematical models allow engineers and designers to understand how the proposed model and actual prototype will be produced.

Thus, the correct option is 2.

Learn more about mathematical modelling

https://brainly.com/question/731147

#SPJ2

Answer:

D) Lower efficiency and lower effectiveness.

Explanation:

Given;

Two finned surfaces with long fins which are identical,

with difference in the convection heat transfer coefficient,

The first finned surface has a higher convection heat transfer coefficient, but gives the same heat rate as the second, which will make it (first finned surface) to have lower efficiency and lower effectiveness than the second finned surface.

Therefore, the correct option is "(D) Lower efficiency and lower effectiveness"

Answer:

See explanation

Explanation:

Solution:-

- Three students measure the volume of a liquid sample which is 6.321 L.

- Each student measured the liquid sample 4 times. The data is provided for each measurement taken by each student as follows:

                                                 Students

                      Trial          A            B               C

                         1            6.35        6.31          6.38

                        2            6.32        6.31          6.32

                        3            6.33        6.32         6.36

                        4            6.36        6.35         6.36

- We will define the two terms stated in the question " precision " and "accuracy"

- Precision refers to how close the values are to the sample mean. The dense cluster of data is termed to be more precise. We will use the knowledge of statistics and determine the sample standard deviation for each student.

- The mean measurement taken by each student would be as follows:

                       [tex]E ( A ) = \frac{6.35 +6.32+6.33+6.36}{4} \\\\E ( A ) = 6.34\\\\E ( B ) = \frac{6.31 +6.31+6.32+6.35}{4} \\\\E ( B ) = 6.3225\\\\E ( C ) = \frac{6.38 +6.32+6.36+6.36}{4} \\\\E ( C ) = 6.355\\[/tex]

- The precision can be quantize in terms of variance or standard deviation of data. Therefore, we will calculate the variance of each data:

                        [tex]Var ( A ) = \frac{6.35^2+6.32^2+6.33^2+6.36^2}{4} - 6.34^2\\\\Var ( A ) = 0.00025\\\\Var ( B ) = \frac{6.31^2+6.31^2+6.32^2+6.35^2}{4} - 6.3225^2\\\\Var ( B ) = 0.00026875\\\\Var ( C ) = \frac{6.38^2+6.32^2+6.36^2+6.36^2}{4} - 6.355^2\\\\Var ( C ) = 0.000475\\[/tex]

- We will rank each student sample data in term sof precision by using the values of variance. The smallest spread or variance corresponds to highest precision. So we have:

                   Var ( A )          <          Var ( B )        <    Var ( C )

                   most precise                                      Least precise

- Accuracy refers to how close the sample mean is to the actual data value. Where the actual volume of the liquid specimen was given to be 6.321 L. We will evaluate the percentage difference of sample values obtained by each student .

                       [tex]P ( A ) = \frac{6.34-6.321}{6.321}*100= 0.30058\\\\P ( B ) = \frac{6.3225-6.321}{6.321}*100= 0.02373\\\\P ( C ) = \frac{6.355-6.321}{6.321}*100= 0.53788\\[/tex]

- Now we will rank the sample means values obtained by each student relative to the actual value of the volume of liquid specimen with the help of percentage difference calculated above. The least percentage difference corresponds to the highest accuracy as follows:

                   P ( B )         <       P ( A )         <      P ( C )

            most accurate                                least accurate

The given question is incomplete. The complete question is as follows.

Steam is contained in a closed rigid container with a volume of 1 m3. Initially, the pressure and temperature of the steam are 10 bar and 500°C, respectively. The temperature drops as a result of heat transfer to the surroundings. Determine

(a) the temperature at which condensation first occurs, in [tex]^{o}C[/tex],

(b) the fraction of the total mass that has condensed when the pressure reaches 0.5 bar.

(c) What is the volume, in [tex]m^{3}[/tex], occupied by saturated liquid at the final state?

Explanation:

Using the property tables

  [tex]T_{1} = 500^{o}C[/tex],    [tex]P_{1}[/tex] = 10 bar

  [tex]v_{1} = 0.354 m^{3}/kg[/tex]

(a) During the process, specific volume remains constant.

  [tex]v_{g} = v_{1} = 0.354 m^{3}/kg[/tex]

  T = [tex](150 - 160)^{o}C[/tex]

Using inter-polation we get,

      T = [tex]154.71^{o}C[/tex]

The temperature at which condensation first occurs is [tex]154.71^{o}C[/tex].

(b) When the system will reach at state 3 according to the table at 0.5 bar then

  [tex]v_{f} = 1.030 \times 10^{-3} m^{3}/kg[/tex]

  [tex]v_{g} = 3.24 m^{3} kg[/tex]

Let us assume "x" be the gravity if stream

   [tex]v_{1} = v_{f} + x_{3}(v_{g} - v_{f})[/tex]

   [tex]x_{3} = \frac{v_{1} - v_{f}}{v_{g} - v_{f}}[/tex]

               = [tex]\frac{0.3540 - 0.00103}{3.240 - 0.00103}[/tex]

               = 0.109

At state 3, the fraction of total mass condensed is as follows.

  [tex](1 - x_{5})[/tex] = 1 -  0.109

                = 0.891

The fraction of the total mass that has condensed when the pressure reaches 0.5 bar is 0.891.

(c) Hence, total mass of the system is calculated as follows.

     m = [tex]\frac{v}{v_{1}}[/tex]

         = [tex]\frac{1}{0.354}[/tex]

         = 2.825 kg

Therefore, at final state the total volume occupied by saturated liquid is as follows.

     [tex]v_{ws} = m \times v_{f}[/tex]

                 = [tex]2.825 \times 0.00103[/tex]

                 = [tex]2.9 \times 10^{-3} m^{3}[/tex]

The volume occupied by saturated liquid at the final state is [tex]2.9 \times 10^{-3} m^{3}[/tex].

Answer:

Explanation:

The value of a will be zero as it is provided that the particle is on the x-axis.

Calculate the velocity of particles along x-axis.

[tex]{\bf{V}} = 2{x^2}t{\bf{\hat i}} + [4y(t - 1) + 2{x^2}t]{\bf{\hat j}}{\rm{ m/s}}[/tex]

Substitute 0 for y.

[tex]\begin{array}{c}\\{\bf{V}} = 2{x^2}t{\bf{\hat i}} + \left( {4\left( 0 \right)\left( {t - 1} \right) + 2{x^2}t} \right){\bf{\hat j}}{\rm{ m/s}}\\\\ = 2{x^2}t{\bf{\hat i}} + 2{x^2}t{\bf{\hat j}}{\rm{ m/s}}\\\end{array}[/tex]

Here,

[tex]A = 2{x^2}t \ \ and\ \ B = 2{x^2}t[/tex]

Calculate the magnitude of vector V .

[tex].\left| {\bf{V}} \right| = \sqrt {{A^2} + {B^2}}[/tex]

Substitute

[tex]2{x^2}t \ \ for\ A\ and\ 2{x^2}t \ \ for \ B.[/tex]

[tex]\begin{array}{c}\\\left| {\bf{V}} \right| = \sqrt {{{\left( {2{x^2}t} \right)}^2} + {{\left( {2{x^2}t} \right)}^2}} \\\\ = \left( {2\sqrt 2 } \right){x^2}t\\\end{array}[/tex]

The velocity of the fluid particles on the x-axis is [tex]\left( {2\sqrt 2 } \right){x^2}t{\rm{ m/s}}[/tex]

Calculate the direction of flow.

[tex]\theta = {\tan ^{ - 1}}\left( {\frac{B}{A}} )[/tex]

Here, θ is the flow from positive x-axis in a counterclockwise direction.

Substitute [tex]2{x^2}t[/tex] as A and [tex]2{x^2}t[/tex] as B.

[tex]\begin{array}{c}\\\theta = {\tan ^{ - 1}}\left( {\frac{{2{x^2}t}}{{2{x^2}t}}} \right)\\\\ = {\tan ^{ - 1}}\left( 1 \right)\\\\ = 45^\circ \\\end{array}[/tex]

The direction of flow is [tex]45^\circ[/tex] from the positive x-axis.

Question:Technician A say's that The most two-stroke engines have a pressure type lubrication system. Technician be says that four stroke engines do not require the mixing of oil with gasoline . Which of them is correct ?

Answer: Technician  B is   correct

Explanation: Two types of engines exist , the two stroke (example, used in chainsaws)  is a type of engine that uses two strokes--a compression stroke and a return stroke to produce power in a crankshaft combustion cycle and the  four stroke engines(eg lawnmowers) which  uses four strokes,  2-strokes during  compression and exhaustion accompanied by 2 return strokes for each of the initial process to produce power in a combustion cycle.

While a 2 stroke system engine, requires mixing of oil and fuel to the crankshaft before  forcing  the mixture into the cylinder and do not require a pressurized system.  The 4 stroke system uses a splash and pressurized system where oil is not mixed with gasoline but drawn from the sump and  directed to  the main moving  parts of  crankshaft through its channels.

We can therefore say that Technician A is wrong while Technician B is  correct

Answer:

The function is [tex]-\sin x[/tex] and the constant of integration is [tex]C = - 1[/tex].

Explanation:

The resultant expression is equal to the sum of a constant multiplied by the integral of a given function and an integration constant. That is:

[tex]a = k\cdot \int\limits {f(x)} \, dx + C[/tex]

Where:

[tex]k[/tex] - Constant, dimensionless.

[tex]C[/tex] - Integration constant, dimensionless.

By comparing terms, [tex]k = 2[/tex], [tex]C = -1[/tex] and [tex]\int {f(x)} \, dx = \cos x[/tex]. Then, [tex]f(x)[/tex] is determined by deriving the cosine function:

[tex]f(x) = \frac{d}{dx} (\cos x)[/tex]

[tex]f(x) = -\sin x[/tex]

The function is [tex]-\sin x[/tex] and the constant of integration is [tex]C = - 1[/tex].

Answer:T = 167.3 N

Explanation:

Given that the

Weight mg = 110 N

The mass m of the ball will be

m = 110/9.8 = 11.22 kg

As the direction of the ball’s velocity is changing, the force responsible for this is centripetal force F. And

F = mV^2/r

Where

V = 5.0 m/s

r = L = 4.9 m

m = 11.22

Substitute all these parameters into the formula

F = (11.22 × 5^2)/4.9

F = 280.6/4.9

F = 57.27 N

Tension T = F + mg

Substitute F and mg into the formula

T = 57.27 + 110

T = 167.3 N

Therefore, the tension in the rope at that point is 167.3 N

Answer:

0.31

126.23 kg/s

Explanation:

Given:-

- Fluid: Water

- Turbine: P3 = 8MPa , P4 = 10 KPa , nt = 85%

- Pump: Isentropic

- Net cycle-work output, Wnet = 100 MW

Find:-

- The thermal efficiency of the cycle

- The mass flow rate of steam

Solution:-

- The best way to deal with questions related to power cycles is to determine the process and write down the requisite properties of the fluid at each state.

First process: Isentropic compression by pump

       P1 = P4 = 10 KPa ( condenser and pump inlet is usually equal )

      h1 = h-P1 = 191.81 KJ/kg ( saturated liquid assumption )

       s1 = s-P1 = 0.6492 KJ/kg.K

       v1 = v-P1 = 0.001010 m^3 / kg

       P2 = P3 = 8 MPa( Boiler pressure - Turbine inlet )

       s2 = s1 = 0.6492 KJ/kg.K   .... ( compressed liquid )

- To determine the ( h2 ) at state point 2 : Pump exit. We need to determine the wok-done by pump on the water ( Wp ). So from work-done principle we have:

                           [tex]w_p = v_1*( P_2 - P_1 )\\\\w_p = 0.001010*( 8000 - 10 )\\\\w_p = 8.0699 \frac{KJ}{kg}[/tex]

- From the following relation we can determine ( h2 ) as follows:

                          h2 = h1 + wp

                          h2 = 191.81 + 8.0699

                          h2 = 199.88 KJ/kg

Second Process: Boiler supplies heat to the fluid and vaporize

- We have already evaluated the inlet fluid properties to the boiler ( pump exit property ).

- To determine the exit property of the fluid when the fluid is vaporized to steam in boiler ( super-heated phase ).

              P3 = 8 MPa

              T3 = ?  ( assume fluid exist in the saturated vapor phase )

              h3 = hg-P3 = 2758.7 KJ/kg

              s3 = sg-P3 = 5.7450 KJ/kg.K

- The amount of heat supplied by the boiler per kg of fluid to the water stream. ( qs ) is determined using the state points 2 and 3 as follows:

                          [tex]q_s = h_3 - h_2\\\\q_s = 2758.7 -199.88\\\\q_s = 2558.82 \frac{KJ}{kg}[/tex]

Third Process: The expansion ( actual case ). Turbine isentropic efficiency ( nt ).

- The saturated vapor steam is expanded by the turbine to the condenser pressure. The turbine inlet pressure conditions are similar to the boiler conditions.

- Under the isentropic conditions the steam exits the turbine at the following conditions:

             P4 = 10 KPa

             s4 = s3 = 5.7450 KJ/kg.K ... ( liquid - vapor mixture phase )

- Compute the quality of the mixture at condenser inlet by the following relation:

                           [tex]x = \frac{s_4 - s_f}{s_f_g} \\\\x = \frac{5.745- 0.6492}{7.4996} \\\\x = 0.67947[/tex]

- Determine the isentropic ( h4s ) at this state as follows:

                          [tex]h_4_s = h_f + x*h_f_g\\\\h_4_s = 191.81 + 0.67947*2392.1\\\\h_4_s = 1817.170187 \frac{KJ}{kg}[/tex]        

- Since, we know that the turbine is not 100% isentropic. We will use the working efficiency and determine the actual ( h4 ) at the condenser inlet state:

                         [tex]h4 = h_3 - n_t*(h_3 - h_4_s ) \\\\h4 = 2758.7 - 0.85*(2758.7 - 181.170187 ) \\\\h4 = 1958.39965 \frac{KJ}{kg} \\[/tex]

- We can now compute the work-produced ( wt ) due to the expansion of steam in turbine.

                        [tex]w_t = h_3 - h_4\\\\w_t = 2758.7-1958.39965\\\\w_t = 800.30034 \frac{KJ}{kg}[/tex]

- The net power out-put from the plant is derived from the net work produced by the compression and expansion process in pump and turbine, respectively.

                       [tex]W_n_e_t = flow(m) * ( w_t - w_p )\\\\flow ( m ) = \frac{W_n_e_t}{w_t - w_p} \\\\flow ( m ) = \frac{100000}{800.30034-8.0699} \\\\flow ( m ) = 126.23 \frac{kg}{s}[/tex]

Answer: The mass flow rate of the steam would be 126.23 kg/s

- The thermal efficiency of the cycle ( nth ) is defined as the ratio of net work produced by the cycle ( Wnet ) and the heat supplied by the boiler to the water ( Qs ):

                        [tex]n_t_h = \frac{W_n_e_t}{flow(m)*q_s} \\\\n_t_h = \frac{100000}{126.23*2558.82} \\\\n_t_h = 0.31[/tex]

Answer: The thermal efficiency of the cycle is 0.31