Answer:
popu
Explanation:
2u2uwju2i2je82jei
What Is a Sound Wave? Learning Goal: To understand the nature of a sound wave, including its properties: frequency wavelength, loudness, pitch, and timbre. Sound is a phenomenon that we experience constantly in our everyday life. Therefore, it is important to understand the physical nature of a sound wave and its properties to correct common misconceptions about sound propagation Most generally, a sound wave is a longitudinal wave that propagates in a medium (ie, air) The particles in the medium oscillate back and forth along the direction of motion of the wave. This displacement of the particles generates a sequence of compressions and rarefactions of the medium Thus, a sound wave can also be described in terms of pressure variations that travel through the medium. The pressure fluctuates at the same frequency with which the particles positions oscillate When the human ear perceives sound. It recognizes a series of pressure fluctuations rather than displacements of individual air particles. Part 1 Figure 1 of 2 > Fi MA length Part A Based on the information presented in the introduction of this problem, what is a sound wave? Propagation of sound particles that are offerent from the particles that comprise the medium Propagation of energy that does not require a medium Propagation of pressure fluctuations in a medium Propagation of energy that passes through empty spaces between the partides that com Submit Request Anst Part B Complete previous parts) Part hall to the other? Does air play a role in the propagation View Available Hints) SUITE Part D The graphs shown in (Figure 1) represent pressure variation versus time recorded by Enter the letters of all the correct answers in alphabetical order.
Answer:
A) Propagation of pressure fluctuations in a medium
B) air is the medium in which the wave is transported,
Explanation:
Part A.
A sound wave is a longitudinal oscillation of the molecules that forms in a material medium, they can be solid, liquid or gases, therefore the wave propagates in the same direction as the oscillation of the particles.
The most correct answer is:
* Propagation of pressure fluctuations in a medium
Part b
air is the medium in which the wave is transported, otherwise it cannot propagate
Nikki was walking around a department store shopping one day, and did not realize that the shirt she was wearing looked just like the shirts worn by employees. When a stranger asked, "do you work here," she thought it was funny. The other customers' assumption that Nikki was a store employee demonstrates the Gestalt principle of _______.
Answer: Similarity
By.
Lolliguncula brevis squid use a form of jet propulsion to swim—they eject water out of jets that can point in different directions, allowing them to change direction quickly. When swimming at a speed of 0.15m/s0.15m/s or greater, they can accelerate at 1.2m/s21.2m/s 2 .
(a) Determine the time interval needed for a squid to increase its speed from 0.15m/s0.15m/s to 0.45m/s0.45m/s.
(b) What other questions can you answer using the data?
Answer:
a) t = 0.25 s, b) x = 0.075 m
Explanation:
a) For this exercise we will use kinematic relationships in one dimension
v = v₀ + a t
in the problem they indicate the initial velocity v₀ = 0.15 m / s, the final velocity v = 0.45 m / s and the acceleration of the squid a = 1.2 m / s²
t = [tex]\frac{v -v_o}{a}[/tex]
we calculate
t = [tex]\frac{0.45 - 0.15}{1.2}[/tex]
t = 0.25 s
b) We can also find the distance traveled during this acceleration
v² = v₀² + 2a x
x = [tex]\frac{v^2 -v_o^2 }{2a}[/tex]
let's calculate
x = [tex]\frac{0.45^2 - 0.15^2 }{2 \ 1.2}[/tex]
x = 0.075 m
NEED HELP ASAP
How does radiation help treat cancer?
(a) It cools down the cancer cells and weakens them.
(b) It cools down the non-cancerous cells and strengthens them.
(c) It heats up the cancer cells and weakens them.
(d) It heats up the non-cancerous cells and strengthens them.
THANK YOU
Answer:
c heats up cancer cells and weakens them.
Answer:
I think it is C
Explanation:
because
A car of mass 150 kg is riding down at constant velocity. What is the normal force?
The formula is ( Fg=mg ; Fnet =ma ; Fx = Fcos theta ; Fy = Fsin theta)
Answer and I will give you brainiliest
Answer:
1500N
Explanation:
Normal force = mg - F sin theta
constant velocity means acceleration = 0
F= ma = 150× 0 = 0N
thus;
normal force = mg = 150 × 10 = 1500N
Answer:
864N
Explanation:
Describe Kinetic Energy and Potential Energy (in your own words please!!)
Answer:
Energy stored in an object due to its position is Potential Energy. · Energy that a moving object has due to its motion is Kinetic Energy.
Explanation:
2. Who was the first to show ancient hieroglyphs of swimming?
Answer:
Rafi Bahalul
Explanation:
Israeli Haaretz newspaper reported Feb. 4 that Rafi Bahalul stumbled upon a 3,400-year-old Egyptian stone anchor engraved with hieroglyphs during a morning swim along Israel's northern shores last year.
kenneth ran a marathon (26.2 miles) in 5.5 hours. What was Kenneth’s average speed? (Round your answer to the nearest tenth.)
0.2 mph
4.8 mph
5.5 mph
144.1 mph
it is actually science i couldn't find the word science
Answer:
4.8mph
Explanation:
Speed= Distance/time
Speed= 26.2/5.5
= 4.76mph
( To the nearest tenth ) = 4.8mph
Answer:
38.7 mph
Explanation:
I just add all the numbers together then divided them by 4, which is the amount of numbers you gave.
The range is the horizontal distance from the cannon when the pumpkin hits the ground. This distance is given by the product of the horizontal velocity (which is constant) and the amount of time the pumpkin is in the air (which is determined by the vertical component of the initial velocity, as you just discovered). Set the initial speed to 14 m/s, and fire the pumpkin several times while varying the angle between the cannon and the horizontal.
Required:
For which angle is the range a maximum (with the initial speed held constant)?
Answer:
Explanation:
For range o a projectile , the formula is as follows
R = u² sin2Ф / g where u is initial velocity of throw , Ф is angle of throw and g is acceleration due to gravity .
Here u = 14 m /s
R = 14² sin2Ф / 9.8
R = 20 sin2Ф
Now R will have maximum value when sin2Ф has maximum value .
Maximum value of sin2Ф = 1
sin2Ф = 1 = sin 90°
Ф = 45°
So when throw is aimed at 45° , range will be maximum .
Anyone know this question?
What is the efficiency of a machine that has an output work of 1675 J and an input work
of 1895 J?
Answer:
1.13%
explanation:
work output/work input =100%
list 5 types of food that should be consumed daily in a healthy diet.Give an example of each type.
Answer:
vegetables and legumes or beans
fruit
lean meats and poultry, fish, eggs, tofu, nuts and seeds, legumes or beans
grain (cereal) foods, mostly wholegrain or high cereal fibre varieties
milk, yoghurt, cheese or alternatives, mostly reduced fat.
Explanation:
Foods are grouped together because they provide similar amounts of key nutrients. For example, key nutrients of the milk, yoghurt, cheese and alternatives group include calcium and protein, while the fruit group is a good source of vitamins, especially vitamin C.
A bartender slides a beer mug at 1.3 m/s towards a customer at the end of a frictionless bar that is 1.3 m tall. The customer makes a grab for the mug and misses, and the mug sails off the end of the bar. (a) How far away from the end of the bar does the mug hit the floor
Answer:
x = 0.67 m
Explanation:
For this problem, let's use the projectile launch equations, as the jug goes through the bar, it comes out with horizontal speed vx = 1.3 m / s, which does not decrease as there is no friction.
Let's find the time or it takes to get to the floor
y = y₀ + v_{oy} - ½ g t²
in this case I go = 0 and when I get to the floor y = 0
0 = y₀ + 0 - ½ g t²
t² = 2y₀ / g
t² = 2 1.3 / 9.8 = 0.2653
t = 0.515 s
now let's find the distance traveled in this time
x = vx t
x = 1.3 0.515
x = 0.6696 m
x = 0.67 m
An 80-kg firefighter slides down a fire pole. After 1.3 seconds of sliding, the firefighter is sliding at a velocity of 6.5 m/s, straight down the pole. Once this velocity is reached, the firefighter grips the pole so that the force of friction exerted by the firefighter's hands on the pole is equal to the force of gravity. At this point what is the downward acceleration of the firefighter
Answer:
a= 0
Explanation:
In the vertical direction, if the friction force (directed upward) is equal to the force of gravity (downward) this means that no net force is acting on the firefighter.According to Newton's 2nd Law, if no net force is present, the acceleration in this direction is just zero, as follows:[tex]F_{net} = m*a = 0 (1)[/tex]
⇒ a = 0
The current supplied by a battery in a portable device is typically about 0.122 A. Find the number of electrons passing through the device in two hours.
I NEED HELP ASAP I WILL GIVE BRAINLIEST ITS DUE TODAY
Decribe how to combine equal forces acting in opposite directions
Answer:
If the two forces are acting in opposite directions, you subtract one from the other. Think of it this way: if one force acts in the opposite direction from another, then it is applying a negative force in that direction. What happens when a negative is added to a positive? Subtraction. If the magnitudes of the forces are equal, they will cancel out.
You have three objects of varying shapes and sizes: Object 1 is a rectangular block of tin. Object 2 is a cube of aluminum. Object 3 is a sphere of copper.
a. the density of tin is 5.75g/cm2. What is the mass of object 1 in kg if the rectangular block has a volume of 1.34L?
b. what is the volume in cubic inches of object 2 if the cube of aluminum 7.58 inches on a side?
c. what is the mass in kg of object 2? the density of aluminum is 2.70g/cm3
d. what is the volume in cm3 of object 3 if the sphere of copper has a diameter 8.62cm? the volume of the sphere is 4 {pi}^3/3
e. what is the mass in kg of object 3? Copper has a density of 8.96g/cm3
Answer: a. m = 7.7 kg
b. V = 435.52 in³
c. m = 1927 kg
d. V = 335.37 cm³
e. m = 3 kg
Explanation: Density is the ratio of mass per volume, i.e., it's the measure of an object's compactness. Its representation is the greek letter ρ.
The formula for density is
[tex]\rho=\frac{m}{V}[/tex]
Density's unit in SI is kg/m³, but it can assume lots of other units.
Some unit transformations necessary for the resolution of the question:
1 L = 1 dm³ = 1000 cm³
1 in³ = 16.3871 cm³
1 g = 0.001 kg
a. V = 1.34 L = 1340 cm³
[tex]\rho=\frac{m}{V}[/tex]
[tex]m=\rho.V[/tex]
m = 5.75 * 1340
m = 7705 g => 7.705 kg
Mass of object 1 with volume 1.34L is 7.7 kg.
b. A cube's volume is calculated as V = side³
V = 7.58³
V = 435.52 in³
Volume of object 2 is 435.52 in³.
c. Using 1 in³ = 16.3871 cm³ to change units:
V = 435.52 * 16.3871
V = 713689.4 cm³
Then, mass will be
[tex]m=\rho.V[/tex]
m = 2.7 * 713689.4
m = 1926961.4 g => 1927 kg
Mass of object 2 is 1927 kg.
d. Volume of a sphere is calculated as [tex]V=\frac{4}{3}.\pi.r^{3}[/tex]
Diameter is twice the radius, then r = 4.31 cm.
Volume is
[tex]V=\frac{4}{3}.\pi.(4.31)^{3}[/tex]
V = 335.37 cm³
Volume of object 3 is 335.37 cm³.
e. [tex]m=\rho.V[/tex]
m = 8.96 * 335.37
m = 3004.91 g => 3 kg
Mass of object 3 is 3 kg.
Please Help!!!!
When energy is transferred in a system, the total amount of energy before the transfer is _____________ after the transformation is complete, just in different forms.
Group of answer choices
different
lost
transformed into light
the same
an object has a mass of 2000kg what is its weight on earth
Answer:
19600 N
Explanation:
weight = mass x gravity
We know that gravity = 9.8 m/s^2 and mass = 2000 kg.
w = m x g
w = 2000 kg x 9.8 m/s^2
w = 19600 N
The weight of the object is 19600 N (newtons).
Answer:
the answer i 2000kg
Explanation:
please help
What variables have the most effect on the strength of the gravitational attraction between two
massive objects?
Answer:
Newton's law also states that the strength of gravity between any two objects depends on two factors: the masses of the objects and the distance between them. Objects with greater mass have a stronger force of gravity between them.
The gravitational force depends upon two variables the mass of the objects and the distance between them.
What is gravitational force?In the universe, each body attracts another body towards itself is called Gravitational Force. Thus, gravitation is the study of the interaction forces between two masses.
Newton’s law of gravitation can be defined as every system of matter in the universe attracts every other system with a definite force. The magnitude of this force has a direct relationship with the masses of the systems.
[tex]F \propto M_1M_2[/tex]
The magnitude of this force has an inverse relation with the square of the distance.
[tex]F \propto 1/r^2[/tex]
Therefore, the gravitational attraction between two bodies can be represented as:
[tex]\displaystyle F = G\frac{ M_1M_2}{r^2}[/tex]
The mass of the physical system is directly proportional to the gravitational attraction therefore when the mass increases then the gravitational force will increase.
Learn more about gravitational force, here:
brainly.com/question/12528243
#SPJ2
Four identical capacitors are connected with a resistor in two different ways. When they are connected as in part a of the drawing, the time constant to charge up this circuit is 1.48 s. What is the time constant when they are connected with the same resistor, as in part b
Answer:
[tex]T_2 = 0.592[/tex]
Explanation:
Given
[tex]T_1 = 1.48s[/tex]
See attachment for connection
Required
Determine the time constant in (b)
First, we calculate the total capacitance (C1) in (a):
The upper two connections are connected serially:
So, we have:
[tex]\frac{1}{C_{up}} = \frac{1}{C} + \frac{1}{C}[/tex]
Take LCM
[tex]\frac{1}{C_{up}} = \frac{1+1}{C}[/tex]
[tex]\frac{1}{C_{up}}= \frac{2}{C}[/tex]
Cross Multiply
[tex]C_{up} * 2 = C * 1[/tex]
[tex]C_{up} * 2 = C[/tex]
Make [tex]C_{up}[/tex] the subject
[tex]C_{up} = \frac{1}{2}C[/tex]
The bottom two are also connected serially.
In other words, the upper and the bottom have the same capacitance.
So, the total (C) is:
[tex]C_1 = 2 * C_{up}[/tex]
[tex]C_1 = 2 * \frac{1}{2}C[/tex]
[tex]C_1 = C[/tex]
The total capacitance in (b) is calculated as:
First, we calculate the parallel capacitance (Cp) is:
[tex]C_p = C+C[/tex]
[tex]C_p = 2C[/tex]
So, the total capacitance (C2) is:
[tex]\frac{1}{C_2} = \frac{1}{C_p} + \frac{1}{C} + \frac{1}{C}[/tex]
[tex]\frac{1}{C_2} = \frac{1}{2C} + \frac{1}{C} + \frac{1}{C}[/tex]
Take LCM
[tex]\frac{1}{C_2} = \frac{1 + 2 + 2}{2C}[/tex]
[tex]\frac{1}{C_2} = \frac{5}{2C}[/tex]
Inverse both sides
[tex]C_2 = \frac{2}{5}C[/tex]
Both (a) and (b) have the same resistance.
So:
We have:
Time constant is directional proportional to capacitance:
So:
[tex]T\ \alpha\ C[/tex]
Convert to equation
[tex]T\ =kC[/tex]
Make k the subject
[tex]k = \frac{T}{C}[/tex]
[tex]k = \frac{T_1}{C_1} = \frac{T_2}{C_2}[/tex]
[tex]\frac{T_1}{C_1} = \frac{T_2}{C_2}[/tex]
Make T2 the subject
[tex]T_2 = \frac{T_1 * C_2}{C_1}[/tex]
Substitute values for T1, C1 and C2
[tex]T_2 = \frac{1.48 * \frac{2}{5}C}{C}[/tex]
[tex]T_2 = \frac{1.48 * \frac{2}{5}}{1}[/tex]
[tex]T_2 = \frac{0.592}{1}[/tex]
[tex]T_2 = 0.592[/tex]
Hence, the time constance of (b) is 0.592 s
Newton's second law says that when an___force is applied to a___ it causes it to____
Answer:
Newton's second law says that when an unbalanced force is applied to a mass it causes it to accelerate
Explanation:
You are given three pieces of wire that have different shapes (dimensions). You connect each piece of wire separately to a battery. The first piece has a length L and cross-sectional area A. The second is twice as long as the first, but has the same thickness. The third is the same length as the first, but has twice the cross-sectional area. Rank the wires in order of which carries the most current (has the lowest resistance) when connected to batteries with the same voltage difference.
Rank the wires from most current (least resistance) to least current (most resistance).
a. Wire of Lenght L and area A
b. Wire of Lenght 2L and area A
c. Wire of Lenght L and area 2A
Answer:
The answer is below
Explanation:
The resistance of a wire is directly proportional to the length of the wire and inversely proportional to its area. The resistance (R) is given by:
[tex]R=\frac{\rho L}{A}\\\\where\ L=length \ of\ wire,A=cross\ sectional\ area, \rho=resistivity\ of\ wire.[/tex]
Let us assume that all the wires have the same resistivity.
a) Wire of Length L and area A
[tex]R_1=\frac{\rho L}{A}[/tex]
b) Wire of Length 2L and area A
[tex]R_2=\frac{\rho *2L}{A}=2R_1[/tex]
C) Wire of Length L and area 2A
[tex]R_3=\frac{\rho L}{2A}=\frac{1}{2}R_1[/tex]
Therefore the wire of least resistance is R3 and R2 has the highest resistivity.
R₃ < R₁ < R₂
Therefore, the ranking of the wires from most current (least resistance) to least current (most resistance) is:
R₃ < R₁ < R₂
How did she change the circuit?
In a movie, the heroine saves the day by cutting a wire
before the time runs out on a timer.
O She changed a short circuit to an open circuit.
O She changed an open circuit to a closed circuit.
O She changed a closed circuit to an open circuit.
O She changed a closed circuit to a short circuit.
Answer:
She changed a closed circuit to an open circuit
Explanation:
This means that she has changed from a short circuit to an open circuit. Then the correct option is C.
What is electric current?The stream of positive charges which flow from the positive terminal to the negative terminal of the battery attached in a circuit.
An interrupted consistency in an electrical circuit prevents current from flowing, which is what the term "OPEN CIRCUIT" refers to.
A closed circuit is comparable to a road that uses a bridge to cross a stream.
An electrical circuit in a gadget with a current rating than a typical circuit, particularly one created by unintentional component engagement and subsequent current misdirection.
In a movie, the heroine saves the day by cutting a wire before the time runs out on a timer.
This means that she has changed from a short circuit to an open circuit.
Then the correct option is C.
Learn more about electric current.
https://brainly.com/question/2264542
#SPJ5
if you make a sound by tapping on a glass of water what is the order of vibration
A. glass - water - air
C. air - water - glass
B. water - glass - air
Answer:
A.) glass water air
Explanation:
hope this helps :) have a great day!!
Answer:
A.) glass - water - air
good luck, i hope this helps :)
Calculate the magnitude and direction of the resultant of the following forces
Answer:
add them
100+150 = 250N same direction
that's the resultant
same direction
HELP ASAP PLEASE
Which 2 factors must be present for chemical vapor deposition to be successful:
A.) The size of the diamond is larger than the most.
B.) The conditions during cooling are controlled.
C.) The heat in a vacuum forms a gas of single atoms.
D.) The heat in a vacuum is decreased to freezing.
E.) The pressure of a reaction vessel is negative.
what is the difference between heat and temperature
dose contact or noncontact force weaken with distance
Answer:
The more massive an object is, the greater the gravitational force. Since gravitational force is inversely proportional to the distance between two interacting objects, more separation distance will result in weaker gravitational forces.
Explanation:
hope this help:)
I need help please will mark brainliest
Answer:
c
Explanation: