Answer:
Explanation:
The answer is -2m/s²
Explain how the stars impact the shape of a galaxy.
Answer:
Galaxies are too far away for astronomers to take real 3D measurements, but we can infer their shape based on the movement of stars. ... This is also true of less common spiral galaxies like the Milky Way. The bulge near the center contains older stars, while the flattened arms are home to younger ones.
Explanation:
The orbits of stars can also affect the shape of a galaxy through a variety of density waves that are produced when material is compressed into something comparable to a traffic jam in galaxies.
What is Star?A star is defined as a celestial object consisting of a luminous sphere of plasma held together by self-gravity where the closest star to Earth is the Sun. While many other stars are visible to the uncovered eye at night, their extreme distance from Earth causes them to appear as fixed points of light.
Galaxies are too far away for astronomers to take true 3D measurements, through which we can estimate their size based on the motion of stars, which is also true for less common spiral galaxies like the Milky Way.
Thus, the orbits of stars can also affect the shape of a galaxy through a variety of density waves that are produced when material is compressed into something comparable to a traffic jam in galaxies.
Learn more about stars, here:
https://brainly.com/question/29359578
#SPJ6
If you walk at an average speed of 5 km/h for 30 minutes, how
far will you walk? (Write your answer with Sl unit.
What amount of heat is required to increase the temperature of 75. 0 grams of gold from 150°C to 250°C? The specific heat of gold is 0. 13 J/g°C. A. 750 joules B. 980 joules C. 1300 joules D. 1500 joules E. 2500 joules.
975 J of heat energy is needed to increase the temperature from 150°C to 250°C of given mass of gold.
From specific heat formula,
[tex]Q = mc \Delta T[/tex]
Where,
[tex]Q[/tex] - Heat absorbed
[tex]m[/tex] - mass of gold = 75. 0 g
[tex]c[/tex] - specific heat of gold = 0. 13 J/g°C
[tex]\Delta T[/tex]- temperature difference = 150°C - 250°C = 100°C
Put the values in the formula,
[tex]Q = 75\times 0.13 \times 100 }\\\\Q = 975 {\rm \ J}[/tex]
Therefore, 975 J of heat energy is needed to increase the temperature of given mass of gold.
To know more about specific heat formula,
https://brainly.com/question/1209542
The heat required to increase the temperature of the gold is 980 J
The correct answer to the question is Option B. 980 J
We'll begin by calculating the change in the temperature of the gold
Initial temperature (T₁) = 150 °C Final temperature (T₂) = 250 °C Change in temperature (ΔT) =?ΔT = T₂ – T₁
ΔT = 250 – 150
ΔT = 100 °C
Finally, we shall determine the heat required.
Mass (M) = 75 gChange in temperature (ΔT) = 100 °C Specific heat capacity (C) = 0.13 J/gºC Heat (Q) =?Q = MCΔT
Q = 75 × 0.13 × 100
Q = 975 J
Q ≈ 980 J
The correct answer to the question is Option B. 980 J
Learn more about heat transfer:
https://brainly.com/question/10854640
A person uses a screwdriver to turn a screw and insert it into a piece of wood. The person applies a force of 20 newtons to the screwdriver and turns the handle of the screwdriver a total distance of 0.5 meter. How would these numbers be different if the person inserted a nail with a hammer instead of the screw with the screwdriver?
A. The force applied would be greater, but the distance would be shorter.
B. The force applied would be less, but the distance would be greater.
C. The force applied would be the same, but the distance would be shorter.
D. The force applied would be the same, but the distance would be greater.
If the person inserted a nail with a hammer instead of the screw with the screwdriver, the force applied would be greater, but the distance would be shorter. The correct option is A.
What is force?The action of push or pull in order to make a body change its state of motion or rest is called Force.
As the force is pressure per unit area. Force is inversely proportional to the area over which force is to applied.
The hammer would take more force to insert the nail. The screw has its helix which is to be inserted and application of force is small.
Thus, the force applied would be greater, but the distance would be shorter. The correct option is A.
Learn more about force.
https://brainly.com/question/11065475
#SPJ2
t if the person inserted a nail with a hammer instead of the screw with the screwdriver?
PLEASE HELP. I'LL GIVE BRAINLIEST IF YOU GET IT RIGHT.
Where have we found evidence of the early history of Earth?
a. The Moon, Venus, and Mars
b. Mars, the Moon, and Jupiter
c. Asteroids, the Moon, and Mars
d. The gas planets
Answer:Most of this ancient space rubble can be found orbiting the Sun between Mars and Jupiter within the main asteroid belt. Asteroids range in size from Vesta – the largest at about 329 miles (530 kilometers) in diameter – to bodies that are less than 33 feet (10 meters) across. The total mass of all the asteroids combined is less than that of Earth's Moon.❤
Mars, the Moon, and Jupiter, Where we have found evidence of the early history of Earth.
What is the evidence of the early history of Earth?The giant-impact theory is currently the one that is most frequently accepted. According to this theory, the Moon was created after the Earth collided with a smaller planet that was around Mars' size.
The Moon was created when the impact's leftover debris gathered in an orbit around Earth. The main asteroid belt, which extends between Mars and Jupiter, is home to the majority of this old space debris.
Asteroids range in size from the largest, Vesta, which has a diameter of roughly 329 miles (530 kilometers), to bodies that are about 33 feet (10 meters) wide. The cumulative mass of all asteroids is less than that of the moon on Earth.
Therefore, option B is correct.
Learn more about Earth, here:
https://brainly.com/question/17801422
#SPJ2
You are handed two mystery materials, and told to find out which materials accepts negative charges more easily. A positively-charged, helium-filled balloon is tied to a tabletop with a string a meter long. What's a simple experiment you could run to find out which material accepts electrons more easily?
The simple experiment you could run to find out which material accepts electrons more easily is to rub them together and move the two charge misery materials one after the other to the positive - charge helium - filled balloon.
According to the fundamental law of static electricity which state that unlike charges attract each other while like charges repel.
The simple experiment you could run if you are handed two mystery materials, and told to find out which materials accepts negative charges more easily charging by friction.
This can be employed by rubbing the two misery materials together and move them one by one to a positively-charged, helium-filled balloon which is tied to a tabletop with a string of a meter long.
The misery material that accepts electron more easily will be attracted to the positive - charge helium - filled balloon. While the gravitational pull will pull down the other misery material. The attraction will not be effective.
Learn more about static charges here: https://brainly.com/question/14210347
Which turn (left or right) requires the truck to slow down more in order to make the turn safely? Explain your answer using appropriate relationships.
rube goldberg machine steps
Answer:
Rube Goldberg Machine is "a comically involved, complicated invention, laboriously contrived to preform a simple operation." 2. What are the 6 Simple Machines? A. The 6 Simple Machines are: wedge, screw, lever, wheel and axel, inclined plane and pulley.
How did Ptolemy adapt the geocentric model so he could account for the motion of the planets?
ANSWER ASAP
Answer:
The most important solution to this problem was proposed by Claudius Ptolemy in the 3rd century AD. He argued that planets move on two sets of circles, a deferent and an epicycle. This explained retrograde motion while keeping the planets in their circular orbits around the Earth.
Explanation:
Two boxes are 8 cm apart. Which of the following should Janet do to decrease the gravitational force between the boxes?
Answer:
the answer is 2.
Explanation:
scientific notation. jst 11a
Answer:
2 * 10^4
Explanation:
(3 * 10^4)(4 * 10^4) / (6 * 10^4)
= (12 * 10^8)/(6 * 10^4)
= 2 * 10^4
what does it mean to be skeptical of health fraud
Something that is falsely advertised to help different health issues. An example could be Eyeball massagers
what is the danger to spacecraft and astronauts from micrometeoroids?
Answer:
Suppose the micrometeoroid weighed 1 g = .001 kg
Suppose also the spacecraft were moving at 18,000 mph (1.5 hrs per rev)
Usually, the smaller particle would be moving but for simplicity suppose that it were stationary wrt the ground
v = 18000 miles / hr * 1500 m/mile / 3600 sec/hr = 7500 m/s
KE = 1/2 * .001 kg * (7500 m)^2 = 28,125 Joules
One can see that 28000 Joules could be damaging amount of energy
It requires a 70.4 N force (parallel to the inclined plane) to pull a 5.86 kg box up a 58.1° inclined plane with a rope at a constant speed. (a) What is the coefficient of kinetic friction between the inclined plane and the box?
(b) If the rope were to break, what acceleration would the box experience as it slid down the ramp?
Answer:
0.667; 4.965
Explanation:
Look at the picture I attached for the force analysis.
a) The coefficient=Friction/Normal Force. Because it's at constant speed, the force of friction + mgsin58.1° (because it's on an inclined plane and has split forces) is equal to the applied force (70.4N). Normal force is not equal to weight force though, because the box is on an inclined plane; it's equal to mgcos58.1°.
b) If it were to break, then the box no longer has an applied force, and the direction of friction has changed to up the inclined plane. F=m/a, so acceleration = mgsin58.1°- Friction/mass
A toaster oven indicates that it operates at 1500 W on a 110 V
circuit. What is the resistance of the oven?
[tex]P=U.I => I=\frac{P}{U}=\frac{1500}{110}=\frac{150}{11}<A>\\I=\frac{U}{R}=> R=\frac{U}{I} = \frac{110}{\frac{150}{11} }=8.06< ohm>[/tex]
The answer is: A. 8.06 ohm
ok done. Thank to me :>
Can the velocity of a body reverse the direction when acceleration is constant? If you think so, give an example.
Consider a particle moving to the left with some speed v. If we take leftward to be the negative direction, then the particle's velocity is -v, and it's moving in the negative direction.
Now give the particle a positive acceleration pointing rightward. The particle will eventually slow to a stop before increasing its speed in the positive direction.
So the answer is yes, the direction in which a body is moving can be reversed with constant acceleration.
A 3-column table with 1 row. The first column titled distance travelled (meters) has entry 6. 1. The second column labeled lower track elapsed time (seconds) has entry 4. 92. The third column labeled higher track elapsed time (seconds) has entry 3. 36. Based on the time measurements in the table, what can be said about the speed of the car on the lower track as compared to the higher track? How can the reasoning for the above answer be best explained? On the higher track, the elapsed time is. Calculate speeds for each track. How much faster was the car on the higher track than the lower track?.
Answer:
B,A,A
Explanation:
Answer:
Other guy is correct b,a,a
Explanation:
At the instant a ball is thrown horizontally, an identical ball is dropped from the same height. Which ball hits the ground first? (no air resistance)
Answer:
They go same in the vaccum
What does electrical energy transform into when used by objects in a home?
Answer:
What can electrical energy be transformed into?
Electrical energy is transformed into many forms - mechanical/kinetic, sound, heat, light, and other forms of electromagnetic radiation - by everyday appliances.
Explanation:
Answer:
none of the other answers could be correct.
Explanation:
The sun nuclear energy transfers to radiant energy A fire Chemical energy transfers to thermal and radiant energy. wind turbine Kinetic motion energy transfers to electrical energy. Lightbulb Electrical energy transfers to radiant and thermal energy. Radio Electrical energy transfers to sound energy.
A 75 kg diver has 5,150.25 J of gravitational potential energy. Determine the diver’s height
Answer:3.4m
Explanation:
What size resistor would produce a 3 amp current flow with a 12 volt battery?
Resistance = volts / amps
Resistance = 12 volts / 3 amps
Resistance = 4 Ohms
Answer: 4 Ohms
4. Marcia consumes 8.4 X 10.J (2000 food calories) of energy per day while maintaining a constant weight.
What is the average power she produces in a day? 97 Watts
Answer:
8.40 is your answer.
Explanation:
The average power she produces in a day be 97.22 Watts.
What is power?The quantity of energy moved or converted per unit of time is known as power in physics. The watt, or one joule per second, is the unit of power in the International System of Units. Power is also referred to as activity in ancient writings. A scalar quantity is power.
Marcia consumes total amount of energy per day = 2000 calories = 8.4 × 10⁶ joule.
1 day = 24 × 60 × 60 second = 86400 second
So, average power she produces in a day = energy/time
= 8.4 × 10⁶ joule/86400 second
= 97.22 Watts
Learn more about power here:
https://brainly.com/question/29575208
#SPJ2
what is the definition for the term Resistance?
Answer:
Hey mate....
Explanation:
This is ur answer.....
There are 2 definitions :-
The refusal to accept or comply with something.The ability not to be affected by something, especially adversely.Hope it helps!
Brainliest pls!
Follow me! :)
How can you use a simple model to describe a wave and its features?
Answer:
Explanation:
Use mathematical representations to describe a simple model for waves that includes how the amplitude of a wave is related to the energy in a wave. Patterns can be used to identify cause and effect relationships.
Please help if you can!
Answer:
a
Explanation:
bc i said so its right lol
Please help!!!!!!!!!!!!!!! I will brainless for all 3 done
Answer:
1) 2 2)5 3)2 or 5
Explanation:
i dont have one
Chapter Name :- Vector
Question :-
A car is moving at Vc speed. Rain is falling vertically at a speed of 10 m / s. What is the value of Vc in this case,if the front glass of the car will get wet?
Answer :- Vc ≥ 10
I need Explanation! Please Don’t do copy from net! If you don’t know then no need to answer!
The value of the speed of the car, for the front glass of the car to get wet, [tex]V_c \geq 10 \ m/s[/tex].
The given parameters:
Speed of the car, = VcSpeed of the rain, = 10 m/sThe relative velocity of the car with respect to the falling rain is calculated as;
[tex]V_{C/R} = V_C- V_R[/tex]
If the speed of the car equals the speed of the rain, the rain will fall behind the car.If the speed of the rain is greater than speed of the car, the rain will fall far in front of the car.If the speed of the car is greater than speed of the rain, the rain will fall on the car.Thus, for the front glass of the car to get wet, [tex]V_c \geq 10 \ m/s[/tex].
Learn more about relative velocity here: https://brainly.com/question/24337516
You plug your microwave into an outlet and then you heat up a piece of pizza in it. This is an example of an...
Microwave Radiation????????????
A car which is traveling at a velocity of 27 m/s undergoes an acceleration of 5.5 m/s^2 over a distance of 430 m. How fast is it going after that acceleration?
73.9m/s (1dp)
1) list everything that you are given using suvat, where s is distance, u is initial velocity(speed), v is final velocity(speed), a is acceleration and t is time
s = 430m
u = 27 m/s
v = ? (we need to work out)
a = 5.5m/s^2
t = (we are not given this value)
2) use an equation that doesn't involve the time
[tex] {v}^{2} = u {}^{2} + 2as[/tex]
3) input the values that we have
[tex] {v}^{2} = ( {27})^{2} + 2(5.5)(430)[/tex]
[tex]v {}^{2} = 5459[/tex]
[tex]v = \sqrt{5459} = 73.9[/tex]
so the answer is 73.9m/s to 1dp
Shown below is a parallel circuit of two light bulbs.
(
Bulb 1
Bulb 2
Which statement best describes what will most likely happen if Bulb 1 burns out?
A. Bulb 2 will also burn out.
B. Bulb 2 will blink off and on.
C. Bulb 2 will stay lit, but will be a dimmer light source.
D. Bulb 2 will stay lit and the light source will be stronger.
NG
The characteristics of parallel circuits allow to find the correct answer for the question about what happens when a light bulb is:
D) Bulb 2 will stay lit and the light source will be stronger.
Electrical circuits have two forms and connection:
• Serie. In this case there is only one path through which current can circulate the current.
• Parallel. There are several roads where the current can circulate.
In a parallel circuit, the total current in the circuit is the sum of the current in each branch, the voltage in all branches remains constant.
Let's analyze the claims:
A) False. The bulbs are independent, what happens to one does not affect the other.
B) False. Both bulbs were on, so the second bulb should not be affected.
C) False. When burn a light bulb, there is more current in the other branch, The opposite happens.
D) True. When burn a light bulb there is more current in the other branch and therefore the light bulb 2 can dissipate more power by shining a little brighter.
In conclusion, using the characteristics of parallel circuits we can find that the correct answer for the question about what happens when a light bulb burns out is:
D) Bulb 2 will stay lit and the light source will be stronger.
Learn more about parallel circuits here: brainly.com/question/23088951