Answer:
Time taken 4 hrs. 38 minutes
Explanation:
As speed = distance/time interval
So time taken = 4.38
speed=distance/time
we know the speed and we know the distance so we can calculate the time
120km/h=525km/time
time=525km/120km/h=4.375hours or 4 hours and 22 minutes and 30 seconds
an object has a weight on the surface of the earth of 370 N. What is the mass
Explanation:
The mass of the object is 370N / (9.81N/kg) = 37.7kg.
How does variation impact natural selection?
If you push an 5 N object 2 m and then push a 10 N object 2 m. Which is TRUE?
You do the same amount of work.
You do more work when you move the 10 N object.
You are more powerful when you move the 5 N object
O You use the same amount of force.
Answer:
Explanation:
You don't do the same amount of work. The work formula is F*d = W
W = work
F = force
d = the distance moved.
So you do more work when you move the 10N object because the Force (F) has doubled.
What is a joule? Pls only answer if you know the answer.
Answer:
the SI unit of work or energy, equal to the work done by a force of one newton when its point of application moves one meter in the direction of action of the force, equivalent to one 3600th of a watt-hour.
Explanation:
Joule, unit of work or energy in the International System of Units (SI); it is equal to the work done by a force of one newton acting through one metre. Named in honour of the English physicist James Prescott Joule, it equals 107 ergs, or approximately 0.7377 foot-pounds.
SHOW ME YOUR SMARTS FOR BRAINLIEST
Why is the value of a substance’s specific gravity always the same numerically as its density?
Because it is always the substance’s density divided by the density of water which is 1 g/cm 3
Because it is always the substance’s density multiplied by the density of water which is 1 g/cm 3
Because specific gravity is the inverse of density
Because these represent the same measurement
Answer:
Because it is always the substance’s density divided by the density of water which is 1 g/cm 3
Explanation:
The density of water is 1g/cm³;
Specific gravity = [tex]\frac{density of substance}{density of water}[/tex]
Since specific gravity is a relative comparison of a substance density with that of water, the values always the same.
Density of water is 1 and it will have no effect on the density of the substance.
The only difference is in the units. The density of a substance will have a unit but that of the specific gravity will have no unit.
Numerically, dividing by 1 has no implication.
Answer: the answer is C
Explanation:Specific gravity is the density of a substance divided by the density of water. Since (at standard temperature and pressure) water has a density of 1 gram/cm3, and since all of the units cancel, specific gravity is usually very close to the same value as density
what is the avarage speed during kick 1
HELP ASAP!! WILL TRY TO GIVE BRAINLIEST
How are ribosomes different from other complex animal cell organelles?
Explanation:
Ribosomes are not quite the same as different organelles since they have no layer around them that isolates them from different organelles, they comprise of two subunits, and when they are creating sure proteins they can become film bound to the endoplasmic reticulum, however they can likewise be free drifting while at the same time performing
what do you know about atom
Answer:
The smallest part of the elements which contains matters in them are atoms :)
What voltage is required to move 6A through 20?
Answer:
120V
Explanation:
Given parameters:
Current = 6A
Resistance = 20Ω
Unknown:
Voltage = ?
Solution:
According to ohms law;
V = IR
Where V is the voltage
I is the current
R is the resistance
Now, insert the parameters and solve;
V = 6 x 20 = 120V
Which two elements would most likely form an ionic compound?
a
From the Periodic Table of Elements - #6 carbon and #8 oxygen
b
From the Periodic Table of Elements - #3 lithium and #9 fluorine
c
From the Periodic Table of Elements - #1 hydrogen and #7 nitrogen
d
From the Periodic Table of Elements - #5 boron and #10 neon
Answer:
boron and neon.
Explanation:
two element compounds are usually ionic when one element is a metal and the other is a non-metal. boron is a metal, whereas neon is a non-metal. i might be wrong but hope it helps.
1Which of the following components of blood would you expect to see in higher
numbers at a site of infection?
a. Red Blood Cells
b. White Blood Cells
C. Platelets
d. Plasma
A truck weighs 500 N on Earth. What's the mass of the truck?
O 5 Kg
O 50 Kg
500 kg
500 N
PLEASE HURRY
Answer:
Solution given:
Wight [W]=500N
gravity [g]=10m/s²
mass[m]=?
we have
W=mg
500=m*10
m=500/10
m=50kg
the mass of the truck is 50kg.
What current in a solenoid 15-cm long wound with 100 turns would produce a magnetic field equal to that of the Earth, 5 cross times 10 to the power of negative 5 end exponentT ?
Answer:
The value is [tex]I= 0.0597\ A[/tex]
Explanation:
From the question we are told that
The length of the solenoid is [tex]l = 15 \ cm = 0.15 \ m[/tex]
The number of turns is [tex]N = 100[/tex]
The magnetic field of the earth is [tex]B = 5* 10^{-5} \ T[/tex]
Gnerally magnetic field is mathematically represented as
[tex]B = \frac{\mu_o * N * I }{ l }[/tex]
=> [tex]I= \frac{Bl}{ \mu_o *N }[/tex]
=> [tex]I= \frac{ 5 *10^{-5} * 0.15}{4\pi *10^{-7} *100 }[/tex]
=> [tex]I= 0.0597\ A[/tex]
how can 23.78 x 10 to the power of negative 6 metre cube per mole changed to meter cube?
Answer:
We multiply [tex]x = 23.78\times 10^{-6}\,\frac{m^{3}}{mol}[/tex] by the amount of mole to change units to cubic meters.
Explanation:
Let [tex]x = 23.78\times 10^{-6}\,\frac{m^{3}}{mol}[/tex], we change the unit to cubic meters by multiplying this number by the amount of moles of the sample. For instance, let [tex]n = 1\,mol[/tex], then the obtain the following result:
[tex]m = x\cdot n[/tex] (1)
[tex]m = \left(23.78\times 10^{-6}\,\frac{m^{3}}{mol} \right)\cdot (1\,mol)[/tex]
[tex]m = 23.78\times 10^{-6}\,m^{3}[/tex]
the rubber covering over a wire acts as a / an ?
Answer:
Most electrical wire is covered in a rubber or plastic coating called insulation. The purpose of insulation covering the metal part of an electrical wire is to prevent accidental contact with other conductors of electricity, which might result in an unintentional electric current through those other conductors.
Explanation:
How are water scarcity and water pollution related?
Water pollution contributes to water scarcity.
Water pollution is a solution to water scarcity.
Water scarcity is a solution to water pollution.
Water scarcity contributes to water pollution.
Answer:
A. Water pollution contributes to water scarcity.
Explanation:
Water pollution occurs when materials are disposed in water body, thus making it unfit for use. A polluted water can not be used for various purposes that water can be used for. Examples include: recreation, drinking, washing etc.
Water scarcity is the situation when available water is not sufficient for the use of organisms in a community. This majorly occurs in arid area.
Thus, since a polluted water renders water to be useless, therefore water pollution contributes to water scarcity.
Answer:
Water contributes to water scarcity
Explanation:
pls nobody has ever given me brainiest pls give me brainliest
An airplane flies at 40 m/s at an altitude of 50 meters. The pilot drops a heavy package which falls to the ground. Where, approximately, does the package land relative to the plane's new position
Answer:
128 m
Explanation:
From the question given above, the following data were obtained:
Horizontal velocity (u) = 40 m/s
Height (h) = 50 m
Acceleration due to gravity (g) = 9.8 m/s²
Horizontal distance (s) =?
Next, we shall determine the time taken for the package to get to the ground.
This can be obtained as follow:
Height (h) = 50 m
Acceleration due to gravity (g) = 9.8 m/s²
Time (t) =?
h = ½gt²
50 = ½ × 9.8 × t²
50 = 4.9 × t²
Divide both side by 4.9
t² = 50 / 4.9
t² = 10.2
Take the square root of both side
t = √10.2
t = 3.2 s
Finally, we shall determine where the package lands by calculating the horizontal distance travelled by the package after being dropped from the plane. This can be obtained as follow:
Horizontal velocity (u) = 40 m/s
Time (t) = 3.2 s
Horizontal distance (s) =?
s = ut
s = 40 × 3.2
s = 128 m
Therefore, the package will land at 128 m relative to the plane
Uncle Harry weighs 750 N. What is his mass in kg?
Answer:
W = MG
750 = M * 10
M = 750/10
M = 75 kg
Answer:
76.479 Kilograms Force (kgf)
Explanation:
What is the distance between a 2000 kg truck and a 3000 kg truck if the gravitational force between them is 0.00006 N?
A 258
B. 567 m
C 981
D. 15
Answer:
A. 2.58m
Explanation:
Using the formula;
F = GMm/r²
M and m are the masses
G is the gravitational constant
r is the distance between the masses
Substitute
0.00006 = 6.67*10^-11(2000)(3000)/r²
0.00006r² = 6.67*10^-11*6000000
0.00006r² = 40.02*10^-5
0.00006r² = 0.0004
r² = 0.0004/0.00006
r² = 6.66
r = 2.58m
Hence the distance between them is 2.58m
The Kentucky Derby is one of the most exciting horse races run every year. In 1973, the horse Secretariat set a record that still stands. This 500-kg horse ran the 2000-m track in 120 s. What was Secretariat's average kinetic energy? (1 kJ = 1000 J)
Answer:
69.44kJ
Explanation:
Kinetic energy is expressed as;
KE = 1/2mv^2
m is the mass = 500kg
v is the velocity
Get the velocity;
v = displacement/time
velocity = 2000/120
velcoity = 16.7m/s
Gt the kinetic energy
KE = 1/2 * 500 * 16.7²
KE = 250*277.78
KE = 69,444.4Joules
Since 1000J = 1kJ
69,444.4Joules = 69,444.4/1000
69,444.4Joules = 69.44kJ
Hence the Secretariat's average kinetic energy is 69.44kJ
Answer:C 69.0kJ
Explanation:
Mr. Davis is riding his bike at a speed of 5 meters per second for 3600 seconds how far did he ride?
Answer:18,000 meters
Explanation:3600x5=18,000.
How much power does it take to do 1000 J of work in 8 seconds?
I got a new kitten and I dont know how to train them to use a leash. Can anyone help?
role play pokimon only
Answer:
huh
Explanation:
im so confused
Answer:
eevee
Explanation:
How much force would be needed to
push a 22 kg box across the floor with
an acceleration of 1.9 m/s^2? Assume
that there is a coefficient of friction of.
17 between the box and the floor.
Help me with this!!!!!!!it’s due in 10 minutes
There would be two forces acting on the box parallel to the floor, with a net force of
∑ F = p - f = m a
where p = magnitude of the push, f = mag. of friction, m = mass of the box, and a = acceleration. To find p, we first need f .
There are also only two forces acting on the box perpendicular to the floor, with net force
∑ F = n - w = 0
where n = mag. of normal force of the floor on the box and w = weight of the box. The net force is 0 because the box is only accelerating parallel to the floor.
w = m g, where g = 9.8 m/s² is the mag. of the acceleration due to gravity, so we can solve for n :
n = w = m g
n = (22 kg) (9.8 m/s²)
n = 215.6 N
The kinetic friction is proportional to the normal force by a factor of the given coefficient of friction, µ = 0.17, such that
f = µ n
f = 0.17 (215.6 N)
f = 36.652 N
Now solve for the required pushing force:
p - 36.652 N = (22 kg) (1.9 m/s²)
p ≈ 78 N
Answer:
0
Explanation:
Explain how the shape of a river's stream bed can affect the river's speed and its power to cause erosion.
Answer:
Possiable answer by edge:
The shape of a river’s stream bed affects the speed and eroding power of a river by influencing the amount of friction between the water flowing through the river and the stream bed below. Friction is the force that opposes the motion of one surface as it moves across another surface. In a river, there is friction between the flowing water and the stream bed beneath it. Where a river is deep, less water comes into contact with the stream bed, so there is less friction. The reduced friction means there is less opposition to the water’s motion, so the river flows at a greater speed and has more kinetic energy for erosion. On the other hand, where a river is shallow, more water comes into contact with the stream bed, so there is more friction. The increased friction means there is more opposition to the water’s motion, so the river flows at a lesser speed and has less kinetic energy for erosion. Also, the roughness of a stream bed covered with boulders and other obstacles causes the water to flow through the river in a turbulent fashion. This could cause the river to move slower in some cases or erode more in other cases.
Explanation:
summary of answer:
influencing the amount of friction between the water flowing through the river and the stream bed below.