Answer:
vₓ = 6.73 m/s
Explanation:
Assuming no other external influences than gravity, in the horizontal direction (which we make to coincide with the x- axis) , speed is constant, so, applying the definition of average velocity, we can write the following equation:[tex]v_{x} = \frac{\Delta x}{\Delta t} (1)[/tex]
Now, in the vertical direction (coincident with the y- axis) , as both movements are independent each other, initial velocity is zero, so we can write the following equation for the vertical displacement:[tex]\Delta h = \frac{1}{2} * g * t^{2} (2)[/tex]
where Δh = -37.0 m , g = -9.8 m/s2Solving (2) for t, we get:[tex]t = \sqrt{\frac{2*\Delta h}{g} } =\sqrt{\frac{2*37.0m}{9.8m/s2}} = 2.75 s (3)[/tex]
Taking t₀ = 0, ⇒ Δt = tReplacing (3) in (1), we get:[tex]v_{x} = \frac{\Delta x}{\Delta t} = \frac{x}{t} = \frac{18.5m}{2.75s} = 6.73 m/s[/tex]
As the horizontal velocity is constant, the initial horizontal velocity is just the average one, i.e., 6.73 m/s.The scientific method is the only way of learning about Nature used by scientist today *
A. true
B. false
Answer:
false
Explanation:
An LED lamp powered by a USB-based portable battery has an effective resistance of 500 Ohm. If the battery is rated for 10,000 mAh, then how long can the lamp be powered and what is the total power consumed by the lamp? The operating voltage of a USB powered device is 5V. Assume that the battery is also rated at 5V.
Answer:
Time = 1000 h
Power = 0.05 W = 50 mW
Explanation:
First we will find the current consumed by the lamp. For this purpose we can use the Ohm's Law. The equation of Ohm's Law is written as follows:
V = IR
I = V/R
where,
I = Current = ?
V = Voltage = 5 V
R = Resistance = 500 Ω
Therefore,
I = 5 V/500 Ω
I = 0.01 A = 10 mA
Now the time duration of the operation f lamp can be found by:
Time = Rating/Current
Time = 10000 mAh/ 10 mA
Time = 1000 h
The power consumption of lamp is given as follows:
Power = IV
Power = (0.01 A)(5 V)
Power = 0.05 W = 50 mW
cameron drives his car 15 km north. He stops for lunch and then drives 12 km south. What is his displacement?
Answer:
Displacement is 3 km North
Explanation:
for an emitted wavelength of 500 nanometers and a redshift of 0.4 what will be the observed wavelength g
Answer:
The observed wavelength is [tex] \lambda = 700nm[/tex] (color - Red)
Explanation:
From the question we are told that
The wavelength of the emitter is [tex]\lambda_ e = 500 nm = 500 *10^{-9} \ m[/tex]
The redshift is R = 0.4
Generally red shift is mathematically represented as
[tex]R = \frac{ \lambda - \lambda_e }{\lambda_e}[/tex]
=> [tex]0.4 = \frac{ \lambda - 500 *10^{-9} }{500 *10^{-9} }[/tex]
=> [tex] \lambda - 500*10^{-9} = 200*10^{-9} [/tex]
=> [tex] \lambda = 700 *10^{-9}[/tex]
=> [tex] \lambda = 700nm[/tex]
Radio station KBOB broadcasts at a frequency of 85.7 MHz on your dial using radio waves that travel at 3.00 × 108 m/s. Since most of the station's audience is due south of the transmitter, the managers of KBOB don't want to waste any energy broadcasting to the east and west. They decide to build two towers, transmitting in phase at exactly the same frequency, aligned on an east-west axis. For engineering reasons, the two towers must be AT LEAST 10.0 m apart. What is the shortest distance between the towers that will eliminate all broadcast power to the east and west?
Answer:
12.5 m
Explanation:
The first thing we would do is to calculate the wavelength. To do this, we use the formula
v = fλ, where
v = wave speed
f = frequency
λ = wavelength
If we make wavelength the formula, we have
wavelength = speed / frequency
Now, we substitute the values we had been given and we have
wavelength = (3 * 10^8 m/s) / (85.7 * 10^6 Hz) wavelength = 3.50 m
half of this said wavelength will be
= 3.50 / 2
= 1.75 m
As a result of the engineering constraints with the towers being more than 10 m apart, the distance can't be 1.75 m and as such, it has to be a multiple of 1.75m. So we say,
(10 / 1.75) = 5.7
So the separation will have to be 7 half wavelengths
= (7 * 1.75) = 12.5 m
When driving at slower speeds you need to use what type of steering
wheel movements compared to when driving at faster speeds? *
Answer:
slower speeds = larger and faster steering wheel movements
faster speeds = small and slow steering wheel movements
Explanation:
When driving at slower speeds you need to use larger and faster steering wheel movements. This is because at slow speeds the car does not have enough momentum to make certain maneuvers with small steering wheel movements in a given amount of time, therefore making large and faster steering wheel movements gives the car enough time with the momentum it has to make the desired maneuver. At faster speeds only small and slow steering wheel movements are needed and while cause the car to quickly change to the desired direction due to the increased momentum of the car.
in a controlled experiment do none of the variables change?
Answer:
Yes
Explanation:
The variables change in and experiment.
Answer:
If you are carefully enough to control everything, then everything that could change the result of your experiment won't happen.
Explanation:
If 2000 kg cannon fires 2 kg projectile having muzzle velocity 200 m/s than the recoil speed of the cannon will be *
A. 0.2 m/s
B. 2 m/s
C. 4 m/s
D. 10 m/s
Answer:
D. 10 m/s
Explanation:
A cart with an unknown mass is at rest on one side of a track. A student must find the mass of the cart by using Newton’s second law. The student attaches a force probe to the cart and pulls it while keeping the force constant. A motion detector rests on the opposite end of the track to record the acceleration of the cart as it is pulled. The student uses the measured force and acceleration values and determines that the cart’s mass is 0.4kg . When placed on a balance, the cart’s mass is found to be 0.5kg . Which of the following could explain the difference in mass?
Answer choices:
A) The track was not level and was tilted slightly downward.
B) The student did not pull the cart with a force parallel to the track.
C) The wheels contain bearings that were rough and caused a significant amount of friction.
D) The motion sensor setting was incorrect. The student set it up so that motion away from the sensor would be the negative direction.
Answer: The correct answer is A) The track was not level and was tilted slightly downward.
Explanation: This is because of the two values: 0.4 kg and 0.5 kg. I won't go into much detail but due to this difference of mass, we know that the track was not level.
"The track was not level and was tilted slightly downward" could explain the difference in the mass.
Mostly because the university student or learners calculates a mass of just over the spring quantity, the vehicle speed seems to have been higher than there would have had to be.Option B, as well as Option C, are wrong because the acceleration would've been smaller in each of these 2 circumstances, so that computed mass would've been larger.
Thus Option A is appropriate.
Learn more:
https://brainly.com/question/11839345
Density is calculated by dividing the mass of an object by its volume. The Sun has a mass of 1.99×1030 kg and a radius of 6.96×108 m. What is the average density of the Sun?
Answer:
Density is calculated by dividing the mass of an object by its volume. The Sun has a mass of 1.99×1030 kg and a radius of 6.96×108 m. What is the average density of the Sun?
A 1000-turn solenoid is 50 cm long and has a radius of 2.0 cm. It carries a current of 18.0 A. What is the magnetic field inside the solenoid near its center
Answer:
The value is [tex]B = 0.0452 \ T [/tex]
Explanation:
From the question we are told that
The number of turns is N = 1000
The length is L = 50 cm = 0.50 m
The radius is r = 2.0 cm = 0.02 m
The current is I = 18.0 A
Generally the magnetic field is mathematically represented as
[tex]B = \mu_o * \frac{N }{L} * I[/tex]
Here [tex]\mu_o[/tex] is the permeability of free space with value
[tex]\mu_o = 4\pi * 10^{-7} N/A^2[/tex]
So
[tex]B = 4\pi * 10^{-7} * \frac{1000}{0.50} * 18.0[/tex]
=> [tex]B = 0.0452 \ T [/tex]
The current is suddenly turned off. How long does it take for the potential difference between points a and b to reach one-half of its initial value
Complete Question
The complete question is shown on the first uploaded image
Answer:
Explanation:
From the question we are told that
The original voltage is [tex]V_o[/tex]
The new voltage is [tex]V =\frac{V_o}{2}[/tex]
The capacitance is [tex]C = 150\ nF = 150 *10^{-9} \ F[/tex]
The first resistance is [tex]R_i = 26 \Omega[/tex]
The second resistance is [tex]R_E = 200 \Omega[/tex]
Generally the equivalent resistance is
[tex]R_e = R_1 + R_E[/tex]
=> [tex]R_e = 26 +200 [/tex]
=> [tex]R_e = 226 \ \Omega [/tex]
Generally the time constant is mathematically represented as
[tex]\tau = RC[/tex]
=> [tex]\tau = 226 * 150 *10^{-9}[/tex]
=> [tex]\tau = 3.39 *10^{-5} \ s [/tex]
Generally the voltage is mathematically represented as
[tex]V = V_o e^{-\frac{t}{\tau} }[/tex]
=> [tex]\frac{V_o}{2} = V_o e^{-\frac{t}{\tau} }[/tex]
=> [tex]0.5 = e^{-\frac{t}{\tau} }[/tex]
=> [tex]ln(0.5) = {-\frac{t}{ 3.39 *10^{-5} } }[/tex]
=> [tex]ln(0.5) * 3.39 *10^{-5} = -t [/tex]
=> [tex]t = 2.35*10^{-5} \ s [/tex]
A shell is fired with a horizontal velocity in the positive x direction from the top of an 80 m high cliff. The shell strikes the ground 1330 m from the base of the cliff. What is the speed of the shell as it hits the ground
Answer:
V = 331.59m/s
Explanation:
First we need to calculate the time taken for the shell fire to hit the ground using the equation of motion.
S = ut + 1/2at²
Given height of the cliff S = 80m
initial velocity u = 0m/s²
a = g = 9.81m/s²
Substitute
80 = 0+1/2(9.81)t²
80 = 4.905t²
t² = 80/4.905
t² = 16.31
t = √16.31
t = 4.04s
Next is to get the vertical velocity
Vy = u + gt
Vy = 0+(9.81)(4.04)
Vy = 39.6324
Also calculate the horizontal velocity
Vx = 1330/4.04
Vx = 329.21m/s
Find the magnitude of the velocity to calculate speed of the shell as it hits the ground.
V² = Vx²+Vy²
V² = 329.21²+39.63²
V² = 329.21²+39.63²
V² = 108,379.2241+1,570.5369
V² = 109,949.761
V = √ 109,949.761
V = 331.59m/s
Hence the speed of the shell as it hits the ground is 331.59m/s
Which property of a substance can be determined using a pH indicator.
Answer:
Acidity
Explanation:
A pH indicator measures how acidic or basic a substance is.
Hope this helped :)
Consider a 50-turn circular loop with a radius of 1.55 cm in a 0.35-T magnetic field. This coil is going to be used in a galvanometer that reads 45 μA for a full-scale deflection. Such devices use spiral springs which obey an angular form of Hooke's law, where the restoring torque is:
τs = -κ θ.
Here κ is the torque constant and θ is the angular displacement, in radians, of the spiral spring from equilibrium, where the magnetic field and the normal to the loop are parallel.
Required:
a. Calculate the maximum torque, in newton meters, on the loop when the full-scale current flows in it.
b. What is the torque constant of the spring, in newton meters per radian, that must be used in this device?
Complete Question
Consider a 50-turn circular loop with a radius of 1.55 cm in a 0.35-T magnetic field. This coil is going to be used in a galvanometer that reads 45 μA for a full-scale deflection. Such devices use spiral springs which obey an angular form of Hooke's law, where the restoring torque is:
τs = -κ θ.
Here κ is the torque constant and θ is the angular displacement, in radians, of the spiral spring from equilibrium, where the magnetic field and the normal to the loop are parallel.
Required:
a. Calculate the maximum torque, in newton meters, on the loop when the full-scale current flows in it.
b. What is the torque constant of the spring, in newton meters per radian, that must be used in this device? Assume the full scale deflection is 60° from the spring's equilibrium position
Answer:
a
[tex]\tau_{m} = 5.95 *10^{-7} \ N \cdot m[/tex]
b
[tex]\beta = 2.83 *10^{-7} \ N \cdot m / rad [/tex]
Explanation:
From the question we are told that
The number of turns is N = 50
The radius is r = 1.55 cm = 0.0155 m
The magnetic field is B = 0.35 T
The induced current is [tex]I = 45 \mu A = 45 *10^{-6} \ A[/tex]
Generally the area of loop is mathematically represented as
[tex]A = \pi r^2[/tex]
=> [tex]A =3.142 * 0.0155^2[/tex]
=> [tex]A =0.000755\ m^2[/tex]
Generally the maximum torque is mathematically represented as
[tex]\tau_{m} = N * B * I * A[/tex]
=> [tex]\tau_{m} = 50 * 0.35 * 45 *10^{-6} * 0.000755[/tex]
=> [tex]\tau_{m} = 5.95 *10^{-7} \ N \cdot m[/tex]
Generally the torque 60° from the spring's equilibrium position is mathematically represented as
[tex]\tau = N * B * I * A * sin (60)[/tex]
=> [tex]\tau = 50 * 0.35 * 45 *10^{-6} * 0.000755 * sin (60)[/tex]
=> [tex]\tau = 2.973 *10^{-7} \ N \cdot m [/tex]
Generally the toque constant of the spring is mathematically represented as
[tex]\beta = \frac{\tau}{60}[/tex]
=> [tex]\beta = \frac{\tau}{\frac{\pi}{3}}[/tex]
=> [tex]\beta = \frac{2.973 *10^{-7}}{\frac{\pi}{3}}[/tex]
=> [tex]\beta = 2.83 *10^{-7} \ N \cdot m / rad [/tex]
What are the standard international (si) units of distance
Answer:
meter
Explanation:
Answer: The International System of Units is a system of measurement based on 7 base units
Explanation: the metre, kilogram, second, ampere, Kelvin, mole, and candela. These base units can be used in combination with each other.
Which is a belief held by sociologists who work from a social-conflict
perspective?
O A. The best approach for a study is from a micro-level orientation.
O B. Personal background has little impact on how individuals react
with one another.
C. Some social patterns are helpful, while others are harmful.
D. Data are irrelevant to the study of sociology.
SUBMIT
Answer:
C. Some social patterns are helpful, while others are harmful.
Explanation:
Hope this was helpful, Have an amazing,spooky Halloween!!
Calculate the force a 75 kg high jumper must exert in order to produce an acceleration that is 3.2 times the acceleration due to gravity.
Answer:
Explanation
According to Newton's second law of motion,
F = ma
m is the mass
a is the acceleration
If the acceleration is 3.2 times the acceleration due to gravity, then a = 3.2g
The formula becomes;
F = m(3.2g)
F = 3.2mg
m= 75kg
g = 9.81m/s²
F = 3.2(75)(9.81)
F = 2,354.4N
Hence the force exerted by the jumper is 2,354.4N
Hollywood and video games often depict the bad guys being "blown away" when they’re shot by a bullet (i.e. once hit, their feet leave the ground and they fly backwards). Assuming that even if a handgun cartridge did generate enough momentum for the bullet to do this, why is it still nonsense on-screen?
Answer:
Taking a look at Newton's third law of motion which states "for every force exerted, their is an opposite force equal in magnitude and opposite in direction on the first force".
Similarly if a bullet had enough forces behind it to hurl someone through the air when they were hit, a similar force would act on the person holding the gun that fired the bullet.
What we load into the gun is called a 'cartridge' Each piece is composed of four basic substance the casing, the bullet, the primer, and the powder.
The primer explodes lighting the powder which causes a buildup of pressure behind the bullet. This powder can be used in rifle cartages because the bullet chamber is designed to withstand greater pressures.
It is difficult in practice to measure the forces within a gun bagel, but the one easily measured parameter is the velocity with which the bullet exits muzzle velocity, therefore assuming that even if a handgun cartridge which generate enough momentum for the bullet to do this, it is still nonsense on screen in Hollywood and video.
A toy rocket is launched vertically from ground level (y = 0 m), at time t = 0.0 s. The rocket engine provides constant upward acceleration during the burn phase. At the instant of engine burnout, the rocket has risen to 98 m and acquired a velocity of The rocket continues to rise in unpowered flight, reaches maximum height, and falls back to the ground. The upward acceleration of the rocket during the burn phase is closest to:
29 m/s2
31 m/s2
33 m/s2
30 m/s2
32 m/s2
Explanation:
The question is incomplete. Here is the complete question.
A toy rocket is launched vertically from ground level (y = 0 m), at time t = 0.0 s. The rocket engine provides constant upward acceleration during the burn phase. At the instant of engine burnout, the rocket has risen to 98 m and acquired a velocity of 30m/s. The rocket continues to rise in unpowered flight, reaches maximum height, and falls back to the ground. The upward acceleration of the rocket during the burn phase is closest to...
Given
initial velocity of rocket u = 0m/s
final velocity of rocket = 30m/s
Height reached by the rocket = 98m
Required
upward acceleration of the rocket
Using the equation of motion below to get the acceleration a:
[tex]v^2 = u^2+2as\\30^2 = 0^2 + 2(a)(98)\\900 = 196a\\a = \frac{900}{196}\\a = 4.59m/s^2[/tex]
Hence upward acceleration of the rocket during the burn phase is closest to 5m/s²
Note that the velocity used in calculation was assumed.
Astronomers have proposed the existence of a ninth planet in the distant solar system. Its semi-major axis is suggested to be approximately 600 AU. If this prediction is correct, what is its orbital period in years
Answer:
T = 1.4696 10⁴ years
Explanation:
For this exercise we must use Kepler's laws, specifically the third law which is the application of the universal law of gravitation to Newton's second law
F = ma
G m M / r² = m a_c = m v² / r
G M / r = v²
the speed of the circular orbit is
v = 2π r / T
we substitute
G M / r = 4π² r² / T²
T² = (4π² / G M) r³
Kepler proved that this expression is the same if the radius is changed by the semi-major axis of an ellipse
T² = (4π² /GM) a³
the constant is worth
(4π² / GM) = 2.97 10⁻¹⁹ s² / m³
let's reduce the distance to SI units
AU is the distance from the Earth to the Sun
a = 600 AU = 600 AU (1.496 10¹¹ m / 1 AU)
a = 8.976 10¹³ m
T² = 2.97 10⁻¹⁹ (8.976 10¹³)³
T² = 21.4786 10²²
T = 4.63 10¹¹ s
Let's reduce to years
T = 4.63 10¹¹s (1 h / 3600s) (1 day / 24 h) (1 year / 365 days)
T = 1.4696 10⁴ years
To practice Problem-Solving Strategy 17.1 for wave interference problems. Two loudspeakers are placed side by side a distance d = 4.00 m apart. A listener observes maximum constructive interference while standing in front of the loudspeakers, equidistant from both of them. The distance from the listener to the point halfway between the speakers is l = 5.00 m . One of the loudspeakers is then moved directly away from the other. Once the speaker is moved a distance r = 60.0 cm from its original position, the listener, who is not moving, observes destructive interference for the first time. Find the speed of sound v in the air if both speakers emit a tone of frequency 700 Hz .
Complete Question
The compete question is shown on the first uploaded question
Answer:
The speed is [tex] v = 350 \ m/s [/tex]
Explanation:
From the question we are told that
The distance of separation is d = 4.00 m
The distance of the listener to the center between the speakers is I = 5.00 m
The change in the distance of the speaker is by [tex]k = 60 cm = 0.6 \ m[/tex]
The frequency of both speakers is [tex]f = 700 \ Hz[/tex]
Generally the distance of the listener to the first speaker is mathematically represented as
[tex]L_1 = \sqrt{l^2 + [\frac{d}{2} ]^2}[/tex]
[tex]L_1 = \sqrt{5^2 + [\frac{4}{2} ]^2}[/tex]
[tex]L_1 = 5.39 \ m [/tex]
Generally the distance of the listener to second speaker at its new position is
[tex]L_2 = \sqrt{l^2 + [\frac{d}{2} ]^2 + k}[/tex]
[tex]L_2 = \sqrt{5^2 + [\frac{4}{2} ]^2 + 0.6}[/tex]
[tex]L_2 = 5.64 \ m [/tex]
Generally the path difference between the speakers is mathematically represented as
[tex]pD = L_2 - L_1 = \frac{n * \lambda}{2}[/tex]
Here [tex]\lambda[/tex] is the wavelength which is mathematically represented as
[tex]\lambda = \frac{v}{f}[/tex]
=> [tex] L_2 - L_1 = \frac{n * \frac{v}{f}}{2}[/tex]
=> [tex] L_2 - L_1 = \frac{n * v}{2f}[/tex]
=> [tex] L_2 - L_1 = \frac{n * v}{2f}[/tex]
Here n is the order of the maxima with value of n = 1 this because we are considering two adjacent waves
=> [tex] 5.64 - 5.39 = \frac{1 * v}{2*700}[/tex]
=> [tex] v = 350 \ m/s [/tex]
The speed of sound in air is 350 m/s
Since the distance between both speakers is 4 m, and the listener is standing 5 m away from halfway between them, the distance L from each loudspeaker to the listener, since the arrangement forms a right-angled triangle, using Pythagoras' theorem,
L = √[(5 m)² + (4/2 m)²]
= √[25 m² + (2 m)²]
= √[25 m² + 4 m²]
= √29 m² = 5.39 m.
Now, when one speaker is moved 60 cm = 0.6 m away from its original position, its distance from the listener is now
L' = √[(5 m)² + (4/2 + 0.6 m)²]
= √[25 m² + (2 m + 0.6 m)²]
= √[25 m² + (2.6 m)²]
= √[25 m² + 6.76 m²]
= √31.76 m²
= 5.64 m.
Now, the path difference when we first have destructive interference is
ΔL = L' - L
= 5.64 - 5.39
= 0.25
Since we have destructive interference for the first time when the speaker is moved, the path difference, ΔL = (n + 1/2)λ where λ = wavelength = v/f where v = speed of sound in air and f = frequency = 700 Hz.
Now, since we have destructive interference for the first time, n = 0.
So, ΔL = (n + 1/2)λ
ΔL = (0 + 1/2)v/f
ΔL = v/2f
Making v subject of the formula, we have
v = 2fΔL
Substituting the values of the variables into the equation, we have
v = 2fΔL
v = 2 × 700 Hz × 0.25 m
v = 350 m/s
So, the speed of sound in air is 350 m/s
Learn more about interference of sound here:
https://brainly.com/question/1346741
A ball of mass m is found to have a weight Wx on Planet X. Which of the following is a correct expression for the gravitational field strength of Planet X?
A. The gravitational field strength of Planet X is mg.
B. The gravitational field strength of Planet X is Wx/m.
C. The gravitational field strength of Planet X is 9.8 N/kg.
D. The gravitational field strength of Planet X is mWx.
Answer: B. The gravitational field strength of Planet X is Wx/m.
Explanation:
Weight is a force, and as we know by the second Newton's law:
F = m*a
Force equals mass times acceleration.
Then if the weight is:
Wx, and the mass is m, we have the equation:
Wx = m*a
Where in this case, a is the gravitational field strength.
Then, isolating a in that equation we get:
Wx/m = a
Then the correct option is:
B. The gravitational field strength of Planet X is Wx/m.
What is the car’s average velocity (in m/s) in interval between t=1.0s to t=1.5s?
Answer:
This question is incomplete
Explanation:
This question is incomplete. However, the formula for velocity is;
Velocity (in m/s) = distance/time
The distance the car covered in the completed question is divided by the difference in the time interval
The difference in the time interval will be = 1.5s - 1.0s = 0.5s
NOTE: the distance must be in meters or be converted to meters
A man with a mass of 86.5 kg stands up in a 61-kg canoe of length 4.00 m floating on water. He walks from a point 0.75 m from the back of the canoe to a point 0.75 m from the front of the canoe. Assume negligible friction between the canoe and the water. How far does the canoe move?
Answer:
The displacement of the canoe is 1.46 m
Explanation:
Given that,
Mass of canoe = 61 kg
Mass of man = 86.5 kg
Length = 4 m
Let the the displacement of the canoe is x'
We need to calculate the displacement of the man
Using formula of displacement
[tex]x=x_{2}-x_{1}[/tex]
Put the value into the formula
[tex]x=4-(0.75+0.75)[/tex]
[tex]x=2.5\ m[/tex]
We need to calculate the displacement of the canoe
Using conservation of momentum
[tex]M_{m}v_{m}=(M_{c}+M_{m})v_{c}[/tex]
[tex]M_{m}\dfrac{x}{t}=(M_{c}+M_{m})\dfrac{x'}{t}[/tex]
[tex]86.5\times2.5=(61+86.5)\times x'[/tex]
[tex]x'=\dfrac{86.5\times2.5}{61+86.5}[/tex]
[tex]x'=1.46\ m[/tex]
Hence, The displacement of the canoe is 1.46 m
a. In one short sentence, explain why we call the force of gravity an attractive force.
b. Does a force of gravity exist between any two objects
Answer:
Explanation:
(a) The force of gravity is called an attractive force because it is the force (although weak) in which a planetary body or matter uses to attract an object towards itself.
(b) Yes, it does and the formula for force of gravity between any two object is
F = G[tex]\frac{m1m2}{r}[/tex]
where m1 and m2 are masses of the first and second object respectively
r is the distance between the center of the two masses
G is the gravitational constant
A 50 kg bicyclist starts his ride down the road with an acceleration of 1m/s2 in air with a density of 1.2 kg/m3. If his velocity at a given moment is 2m/s, how much force is he exerting? Assume the area of his body is 0.5m^2.
a. The bicyclist is exerting 1.1 N of force.
b. The bicyclist is exerting 49 N of force.
c. The bicyclist is exerting 50 N of force.
d. The bicyclist is exerting 51 N of force.
Answer:
b. The bicyclist is exerting 49 N of force
Explanation:
Given;
mass of bicyclist start, m = 50 kg
acceleration, a = 1 m/s²
density of air, ρ = 1.2 kg/m³
velocity, v = 2 m/s
Area of the bicyclist body, A = 0.5 m²
The drag force on the bicyclist is given by ;
Fd = 0.5CρAv²
where;
C is drag coefficient = 0.9 for bicycle
Fd = 0.5 x 0.9 x 1.2 x 0.5 x 2²
Fd = 1.1 N
The force of the bicyclist is given by;
F = ma
F = 50 x 1
F = 50 N
The effective force exerted by the bicyclist is given by;
Fe = F - Fd = 50 N - 1.1 N
Fe = 49 N
Therefore, the force exerted by the bicyclist is 49 N
On top of a cliff of height h, a spring is compressed 5m and launches a projectile perfectly horizontally with a speed of 75 m s . It hits the ground with speed 90 m s . How high above the ground was the cliff? (Hint: use energy conservation to make the problem easier!)
Answer:
The height of the cliff is 121.276 m
Explanation:
Given;
initial velocity of the projectile, v₁ = 75 m/s
final velocity of the projectile, v₂ = 90 m/s
spring compression = 5 m
Apply the law of conservation of energy;
mgh₀ + ¹/₂mv₁² = mgh₂ + ¹/₂mv₂²
gh₀ + ¹/₂v₁² = gh₂ + ¹/₂v²
gh₁ - gh₂ = ¹/₂v₂² - ¹/₂v₁²
g(h₀ - h₂) = ¹/₂ (v₂² - v₁²)
h₀ - h₂ = ¹/₂g (v₂² - v₁²)
h₀ = h(cliff) + 5m
when the projectile hits the ground, Final height, h₂ = 0
[tex]h_o - 0 = \frac{1}{2g}(v_2^2-v_1^2)\\\\h_{cliff} + 5= \frac{1}{2g}(v_2^2-v_1^2)\\\\h_{cliff} = \frac{1}{2g}(v_2^2-v_1^2) - 5\\\\h_{cliff} = \frac{1}{2*9.8}(90^2-75^2) - 5\\\\h_{cliff} = 121.276 \ m[/tex]
Therefore, the height of the cliff is 121.276 m
which statement is correct about the strength of forces?
-Electrostatic forces are exactly 10 times stronger than gravitational forces.
-Electrostatic forces are exactly 10 times weaker than gravitational forces.
-Electrostatic forces are trillions of times stronger than gravitational forces.
-Electrostatic forces are trillions of times weaker than gravitational forces.
Answer:
Thanks!!!!! adding this so it doesn’t get deleted.
Explanation:
1. Electrostatic forces are trillions of times stronger than gravitational forces. 2. normal force and friction 3. contact forces 4. The electrostatic forces from the contact of the hands with the paper causes the paper molecules to separate. 5. The electrostatic forces between the molecules of the board prevent the force of gravity from breaking the board apart.
The correct statement over here is that electrostatic forces are trillions of times stronger than gravitational forces. Hence, option C is correct.
What is an Electrostatic Force?One of the basic forces in the cosmos is electrostatic force. In the universe, there are four basic forces. These include gravitational force, electromagnetic force, weak nuclear force, and strong nuclear force. Under the umbrella of electromagnetic force is electrostatic force. Two charges placed apart are subject to the electrostatic force. The size of each charged and the separation between them determines how much electrostatic force there will be.
When two charges of the same type are brought together, whether positive or negative, they repel one another. It is known as the electrostatic force of repelling when it operates among two charges that are similar.
Therefore, the electrostatic forces are trillions of times stronger than the gravitational forces.
To know more about Electrostatic Force:
https://brainly.com/question/9774180
#SPJ2
I NEED HELP PLEASEE ITS AN ECONOMICS QUESTION ABOVE
Answer:
I believe the answer is Property taxes
Explanation:
Answer: I'm pretty sure property taxes
Explanation: