Explanation:
Given:
Speed of sound = 1400 m/s
Total time taken = 0.4 seconds
To find:
The depth of water
Solution:
As it take 0.4 seconds for the burst to reach the seabed and return (both ways), we can deduce that it takes 0.2 seconds to reach the seabed (one way).
This is because the speed of sound is a constant.
Now, to find the depth, we use the equation
Speed = Distance/Time
Here, we know the values of speed (1400 m/s) and time (0.2 seconds). Distance is the depth of the water, which we need to find. Let the distance be x.
Therefore
1400 = x/0.2
x = 1400 * 0.2
x = 280 m
We get the depth as 280 metres.
Feel free to ask me if you didn't understand any part.
Hope this helps! :D
two children of masses m1 = m2 = 20 kg , ride on the perimeter of a small merry-go- round . the merry -go-round us a disk of mass M = 30 kg answer
Answer:
c
Explanation:
objects through which light can pass are referred to as dash objects
Answer:
Those objects are called transparent objects...
Explanation:
If only some light can pass through them ,it is called translucent....
If no light can pass through them ,it is called opaque.
Answer:
hii good morning
hey i am not good player but i wanted to give a triel to play duo in ff
3. Determine the units of the quantity described by the following com-
binations of units:
a. kg (m/s) (1/s)
b. (kg/s) (m/s2)
c. (kg/s) (m/s)
d. (kg/s) (m/s)
An ant walks 15 m east, then 40 m north, and finally 20 m west. What is the total displacement from the starting point
Answer: 40.311 m
Explanation:
Given
Ant walks 15 m east
then 40 m North and finally 20 m west
from the figure, ant is 40 m North and 5 m west
Using Pythagoras, we can write
[tex]\Rightarrow d=\sqrt{40^2+5^2}\\\Rightarrow d=\sqrt{1625}=40.311\ m[/tex]
(b) Figure 4 shows a car travelling on a motorway.
A passenger wants to check the accuracy of the speedometer of the car.
The car is travelling at a constant speed.
The passenger has a stopwatch.
The lamp posts are 40 m apart.
lamp post
Figure 4
Describe how the passenger could determine the speed of the car as accurately
as possible.
(3)
Answer:
To calculate anything - speed, acceleration, all that - we need data. The more data we have, and the more accurate that data is, the more accurate our calculations will be. To collect that data, we need to measure it somehow. To measure anything, we need tools and a method. Speed is a measure of distance over time, so we'll need tools for measuring time and distance, and a method for measuring each.
Conveniently, the lamp posts in this problem are equally spaced, and we can treat that spacing as our measuring stick. To measure speed, we'll need to bring time in somehow too, and that's where the stopwatch comes in. A good method might go like this:
Press start on the stopwatch right as you pass a lamp postEach time you pass another lamp post, press the lap button on the stopwatchPress stop after however many lamp posts you'd like, making sure to hit stop right as you pass the last lamp postRecord your dataCalculate the time intervals for passing each lamp post using the lap dataCalculate the average of all those invervals and divide by 40 m - this will give you an approximate average speedOf course, you'll never find an *exact* amount, but the more data points you have, the better your approximation will become.
Pls helppp. Is this right?
Answer:
yes you are totally right
A force of 1000 N is exerted on a golf ball for 0.005 s. The change in momentum of the golf ball is - a 200,000 kg m//s b 50 kg m//s c 5,000 kg m//s d 5 kg m//s
Answer:
d) 5 Ns
Explanation:
Impulse = Ft = 1,000(0.005) = 5
If the velocity of a car is 45km/h west, how far can it travel in 0.5 hours
Answer:
22.5km
Explanation:
Since 0.5 of an hour is half of an hour, you have to divide 45 by half, and you would get 22.5 km
13.If a jet plane with a velocity of 20 m/s at t = 0 accelerates at a rate of 40 m/s²
for 3 seconds, what is its veloaty at time = 3 seconds?
Answer:
140m/s
Explanation:
V=V0+at. V=20+40*3=140m/s
Putting the moon back to its original size, if it were suddenly to move to twice the
distance from the earth, how would that effect the force of gravitation with the
earth?
Electrical current is defined as _____.
the strength of the electric field
the movement of charge past a certain point per unit time
the potential of the battery
the conservation of charge
Answer:
the strength of the electric field
Select the correct answer from each drop-down menu.
Photosynthesis is a process in which plants prepare food using carbon dioxide, chlorophyll, and water in the presence of sunlight.
During photosynthesis,(blank)
energy is transformed into(blank)
1.Chemical,electrical,kinetic, Solar ?
2.Chemical, Electrical, Kinetic, Solar
Answer:
During photosynthesis solar energy is converted into chemical energy
Explanation:
During photosynthesis solar energy is converted into chemical energy in the form of energy rich bond of ATP molecule.
ATP (Adenosine triphosphate) and ADP (Adenosine diphosphate) molecules are termed currency of energy. ADP molecule is converted into ATP molecules, whenever energy is available in certain exothermic reactions of metabolism.
ATP molecules are store- house of energy. ATP molecule is broken down into ADP molecule in presence of enzyme ATPase, releasing energy whenever energy is required.
The synthesis of ATP molecules, utilizing solar energy during photosynthesis, is termed photo-phosphorylation.
These ATP molecules produced during light reaction of photosynthesis are utilized in dark reaction of photosynthesis (Calvin cycle).
ATP molecules synthesized during photo-phosphorylation may also be used in other metabolic reactions.
Photo-phosphorylation is of 2 types, i.e. Cyclic and Non-cyclic photo-phosphorylation.
Chlorophyll molecules entrap solar energy . There are 2 types of photo-systems in chlorophyll. These are photo-system -I and photo-system-II .
The electrons of chlorophyll molecule of photo-system I get excited which pass through series of electron carriers in electron transport system arranged in the order of decreasing energy level.
During the passage of electrons from carriers of higher energy level to the carriers of lower energy level, the energy is lost which is utilized for converting ADP molecule into ATP molecule.
Photo-system I is concerned with light reaction of photosynthesis only, constituting cyclic photo-phosphorylation.
The electron transport during Photo-system II results in the synthesis of NADPH2 in presence of enzyme NADP reductase. NADPH2 is used in reduction reaction of Calvin cycle.
Both Photo-systems participate in non-cyclic photo-phosphorylation that results in the synthesis of NADPH2 in addition to the synthesis of ATP molecules.
3. How does the wavelength of green different from violet-indigo?
Answer:
As the full spectrum of visible light travels through a prism, the wavelengths separate into the colors of the rainbow because each color is a different wavelength. Violet has the shortest wavelength, at around 380 nanometers, and red has the longest wavelength, at around 700 nanometers.
Explanation:
Question 2
What measurements are needed to calculate your BMI?
A. Weight and shoe size
B. Height and weight
C. heart and breathing rate per minute
D. core temperature and height
Answer:
B
Explanation:
Sunlight is a form of electromagnetic energy.
Please select the best answer from the choices provided
T
F
Answer: True
Explanation: Hope this helps :)
will mark as brainliest . pls help
Answer:
answer D
Explanation:
circuit breaker is useful when you do something with your domestic electric circuit..
2. How does laser light differ from
normal light?
Answer:
Laser light differs from normal light because laser lights are monochromatic which means it only shines one color and only that color :3
Explanation:
:3
You ride your bike 5 miles east to school, then 2 miles east to Wawa, return to school, then ride 2 miles west to the library to work on your homework. What is your displacement?
Answer:
3 miles
Explanation:
5 + 2 - 2 - 2 = 3 miles
A force of 100N stretches an elastic string to a total length of 20cm. if an additional force of 100N stretches the spring 5 cm further, find the natural length of the spring if the elastic limit is not exceeded. Pls help ASAP
Answer:
8cm
Explanation:
The general formula to find this is F/X where in this case the f is the total of the two forces (100+100) and x is the sum of the length ( 20+5) which together comes 200&25respectively then divide 200 with 25 which comes 8cm.
What are the mechanical advantage and mechanical efficiency of a lever that requires an input force of 40 N and lifts and lifts a boulder that weighs 80 N?
Answer:
2 , 200%
Explanation:
Mechanical advantage of a machine is defined as how much the machine multiplies the applied force.
It is given that :
Input force of the lever = 40 N
The weight of the boulder or the output force = 80 N
Therefore, the mechanical advantage = output force / input force
[tex]$=\frac{80}{40}$[/tex]
= 2
Mechanical efficiency is obtained by the dividing the output by the input and multiplying it with 100.
i.e. Efficiency = output / input x 100
[tex]$=\frac{80}{40}\times 100$[/tex]
= 200 %
A ball is launched horizontally at a speed of 4.0m/s from the top of a cliff that is 24.6 meters high. Where in the ball's trajectory is the horizontal speed a maximum? Explain how you know.
Answer:
The horizontal speed of the ball is constant where there is little resistance from the air
Explanation:
From the given parameters of the ball, we have;
The horizontal speed of the ball = 4.0 m/s
The height of the cliff from which the ball is launched = 24.6 meters
The direction in which the ball is launched = Horizontally
The components of the forces acting on the ball are;
The vertical force = The Earth's gravitational attraction
The horizontal force = 0 N (There are no horizontal forces acting on the ball)
According to Newton's first law of motion, the ball will continue in its uniform motion or in its rest state unless acted upon by a force
Therefore, given that there are no horizontal forces component acting on the ball, (little air resistance) the ball will continue with the initial horizontal velocity, such that the horizontal velocity of the ball remains constant.
Una bola se lanza verticlamente de la parte superior de un edificio con una velocidad inicial 25 m/s la bola impacta al suelo en la base del edificio 7 segundos despues de ser lanzada ¿que altura subio la bola
Answer:
S = 415.1 meters
Explanation:
Dados los siguientes datos;
Velocidad inicial = 25 m/s
Tiempo, t = 7 segundos
Para encontrar la altura (desplazamiento) de la pelota, usaríamos la segunda ecuación de movimiento;
[tex] S = ut + \frac {1}{2}at^{2}[/tex]
Dónde;
S representa el desplazamiento o altura medida en metros.
u representa la velocidad inicial medida en metros por segundo.
t representa el tiempo medido en segundos.
a representa la aceleración medida en metros por segundo cuadrado.
Sustituyendo en la ecuación, tenemos;
[tex] S = 25*7 + \frac {1}{2}*(9.8)*7^{2}[/tex]
[tex] S = 175 + 4.9*49 [/tex]
[tex] S = 175 + 240.1 [/tex]
S = 415.1 meters
An egg sinks in fresh water but floats on concentrated salt solution
the salt solution exerts a greater up thrust on the egg which balances the weight of the egg, so the egg floats in a strong salt solution but sinks in fresh water
One of the solid reactants was treated in a coffee grinder before adding to
the reaction container. *
O
A. Concentration
B. Temperature
C. Surface Area
D. Catalyst
E. Agitation
Answer:
C. Surface area
Explanation:
The rate of chemical reaction depends on various factors such as:
concentration and pressurenature of reactantstemperaturesurface areapresence of catalyst, etc.Effect of surface area of reactants: the rate of a chemical reaction can be increased by increasing the the area of contact of the reacting substances. This is especially important when one or more of the reactants are solids., because only the particles of the solid that are exposed are able to take part in the reaction at each instant of time. Therefore, the greater the surface area of the solid reactant particles the faster the reaction.
The surface area of solid reactants can be increased by grinding or pelletizing, thus allowing for a greater contact between the reacting particles,
The instance in which one of the solid reactants was treated in a coffee grinder before adding to the reaction container is one way of increasing the surface area of a reactant.
A disturbance that generates a wave may be a simple pulse or shock
True or false
Answer:
That would be true.
-- a bell starts ringing (wave) when you tap it (simple pulse)
-- a pond starts rippling (wave) when a stone drops in (simple shock)
-- a guitar strings starts waving when you pluck it
Three vector are oriented as shown in figure below where. A=20.0units, B=40.0units, And C=30.0. (a) The x and Y component of the resultant vector. (b) The magnitude of the resultant vector. (c) Direction of the resultant vector { please help me}
Answer:
Explanation:
a). Vertical component of vector B = Bsin(45)
= 40sin(45°)
= 28.28 units
Horizontal component of vector B = Bcos(45°)
= 40cos(45°)
= 28.28 units
Vertical component of vector C = Csin(45°)
= 30sin(45°)
= 21.21 units
Horizontal component of vector C = Ccos(45°)
= 30cos(45°)
= 21.21 units
Vertical forces = A + Bsin(45°) - Csin(45°)
= 20 + 28.28 - 21.21
= 27.07
Horizontal forces = Bcos(45°) + Ccos(45°)
= 28.28 + 21.21
= 49.49 units
b). Magnitude of resultant force = [tex]\sqrt{(27.07)^2+(49.49)^2}[/tex]
= [tex]\sqrt{3182.045}[/tex]
= 56.41 units
c). Direction of the resultant force → Along vector B (at an angle of 45° from the horizontal line)
who invented Pascal??
A centrifuge used in DNA extraction spins at a maximum rate of 7000rpm producing a "g-force" on the sample that is 6000 times the force of gravity. If the centrifuge takes 10 seconds to come to rest from the maximum spin rate: a) What is the angular acceleration of the centrifuge? b)what is the angular displacement of the centrifuge during this time
Answer:
A) a = 73.304 rad/s²
B) Δθ = 3665.2 rad
Explanation:
A) From Newton's first equation of motion, we can say that;
a = (ω - ω_o)/t. We are given that the centrifuge spins at a maximum rate of 7000rpm.
Let's convert to rad/s = 7000 × 2π/60 = 733.04 rad/s
Thus change in angular velocity = (ω - ω_o) = 733.04 - 0 = 733.04 rad/s
We are given; t = 10 s
Thus;
a = 733.04/10
a = 73.304 rad/s²
B) From Newton's third equation of motion, we can say that;
ω² = ω_o² + 2aΔθ
Where Δθ is angular displacement
Making Δθ the subject;
Δθ = (ω² - ω_o²)/2a
At this point, ω = 0 rad/s while ω_o = 733.04 rad/s
Thus;
Δθ = (0² - 733.04²)/(2 × 73.304)
Δθ = -537347.6416/146.608
Δθ = - 3665.2 rad
We will take the absolute value.
Thus, Δθ = 3665.2 rad
A potato is which part of the plant?
root
stem
leaf
flower
A yo-yo is twirled on a 4 meter long string so that its tangential
speed is 16 m/s. If the string is only 2 meter long and the revolutions per
second stay constant, what is the new tangential speed?
Answer:
8m/s
Explanation:
i think i had this question on a test i'm taking so i'm assuming i cannot say for sure if this is correct