a bungee jumper who is about to jump has her energy stored entirely as gravitational potential energy. After jumping she bounces up and down on the elastic bungee cord. what has happened to her initial gravitational potential energy when she reaches the bottom of this motion the first time after she jumps?

A. Most of her initial energy has been converted to kinetic energy.

B. Most of her initial energy has been converted to potential energy stored in the bungee cord.

C. Most of her initial energy has been depleted due to friction and air resistance.

D. Most of her initial energy has been converted back to gravitational potential energy.

Answer:

While the transatlantic slave trade mainly involved enslaving people from West Africa and forcing them to work on plantations in the Americas, modern slavery is more widespread in countries across the world, including the UK. The Atlantic slave trade contributed to the activity of many provision and redistribution markets, and enabled the creation of large fortunes that were invested in highly diverse activities and forms of consumption.

Explanation:

hope that helps

The displacement vector for a is given below:

A=4.15m, θA=26.5o

Ax=AcosθA = 4.15cos26.5 = 3.7 m

Ay=AsinθA = 4.15sin26.5 = 1.85 m

B= 4.15m, θB =26.5o

Bx=BcosθB = 4.15cos90= 0.0 m

By=BsinθB = 4.15sin90= 4.15 m

a)

(A+B)x= Ax+ Bx= 3.7 – 0.0 = 3.7 m

(A+B)y = Ay+ By= 1.85 + 4.15 = 6.0 m

(A+B)=sqrt[(3.7)^2+(6.0)^2] = 7.05 m

Φ= tan^-1[((A+B)y)/( (A+B)x)] = tan^-1(6.0/3.7) = 58.34o…….counterclockwise from +X axis

b)

(A-B)x= Ax- Bx= 3.7 – 0.0 = 3.7 m

(A-B)y = Ay- By= 1.85 - 4.15 = -2.3 m

(A-B)=sqrt[(3.7)^2+(2.3)^2] = 4.36 m

Φ= tan^-1[((A-B)y)/( (A-B)x)] = tan^-1(-2.3/3.7) = -31.9o = 360-31.9 = 328.1o…….counterclockwise from +X axis

c)

(B-A)x= Bx- Ax= 0.0-3.7 = -3.7 m

(B-A)y = By- Ay= 4.15-1.85 = 2.3 m

(B-A)=sqrt[(-3.7)^2+(-2.3)^2] = 4.36 m

Φ= tan^-1[((B-A)y)/( (B-A)x)] = tan^-1(2.3/-3.7) = -31.9o = 180-31.9 = 148.1o…….counterclockwise from +X axis

d)

(A-2B)x= Ax- 2Bx= 3.7 – 2*0.0 = 3.7 m

(A-2B)y = Ay- 2By= 1.85 – 2*4.15 = -6.45 m

(A-2B)=sqrt[(3.7)^2+(-6.45)^2] = 7.44 m

Φ= tan^-1[((A-2B)y)/( (A-2B)x)] = tan^-1(-6.45/3.7) = -60.16o = = 360-60.16 = 229.84o…….counterclockwise from +X axis

Read more about displacement vectors here:

https://brainly.com/question/13416288

#SPJ1

Larry observes that the window looks upside down because the lens forms an inverted image. When light passes through a convex lens, it is refracted (bent) towards the center of the lens. The degree of bending depends on the angle of incidence and the refractive index of the lens. This bending of light rays causes the image to be inverted.

Mirez observes that his thumb looks right side up because the orientation of the object being viewed through the lens matters. When an object is placed at a distance greater than the focal length of the convex lens, the lens forms a real and inverted image. However, when the object is placed at a distance less than the focal length of the lens, the lens forms a virtual and erect image. In this case, Mirez's thumb is closer to the lens than the focal length, and hence, the lens forms a virtual and erect image of the thumb.

Sherly observes that everything looks blurry because the lens is not able to form a sharp image. The blurriness is due to spherical aberration, which is a common problem in lenses. When light passes through the curved surface of the lens, the rays passing through the edges of the lens bend more than those passing through the center. This causes the light to converge at different points on the image plane, resulting in a blurry image. To overcome spherical aberration, lenses are designed with multiple curved surfaces, or with non-uniform thickness.

The lens that produces an upside-down image is called a convex lens. Hence, Larry finds the lens called a convex lens.

The lens that converges the ray of light is called a convex lens. The lens that curved inwards, has a thicker middle portion and thinner at the lower and the middle part.

Convex lenses produce virtual and real images depending on the object's position. It also produces an upside-down image. It also produces a magnified image.

From the observation,

The convex lens produces an upside-down image. The lens produces an upside-down image, when light passes through the lens, it bends toward the center. This bending of light rays causes an inverted image.

Mirez's observation is based on the focal length of the convex lens. When an object is placed at a larger distance than the focal length of the convex lens, it produces a real and inverted image whereas the object's distance is lesser than the focal length, it produces a virtual and erect image.

Hence, he placed his thumb closer to the convex lens, the focal length is decreased and it produces a virtual and erect image. Sherly saw the blurred image because the lens does not produce sharp images. The lens doesn't produce sharp images as it has certain spherical aberrations.

To learn more about the Convex lens:

https://brainly.com/question/27087947

#SPJ2

The runner will take a full day to complete the race, assuming he maintains the same pattern of slowing down by half the previous hour's distance each hour.

We can approach this problem by using a formula for the sum of an infinite geometric series, since the distances covered by the runner in each hour form a geometric sequence with a common ratio of 1/2. The formula is:

S = a / (1 - r),

where S is the sum of the series, a is the first term, and r is the common ratio.

In this case, the first term a is 12 miles, and the common ratio r is 1/2. We want to find the total distance S covered by the runner over the entire 24-mile race, so we can set:

S = 12 / (1 - 1/2) = 24

This means that the runner will cover the remaining 12 miles in the final hour, and so the total time taken to finish the race will be:

1 + 1 + 1 + ... (24 times) = 24 hours

So, the runner will take a full day to complete the race, assuming he maintains the same pattern of slowing down by half the previous hour's distance each hour.

learn more about distance: https://brainly.com/question/26046491

#SPJ1

When a charged object is at rest, the electric field lines emanating from it are radially symmetric and point outward in all directions, forming a pattern that depends on the magnitude and sign of the charge. If the charged object is set in motion, it creates a changing electric field that propagates outward from the object at the speed of light.

The direction of magnetic field lines is depicted using arrows or lines that indicate the direction of the magnetic field at each point in space. The convention for drawing magnetic field lines is that they always form closed loops, and the direction of the field is tangential to the bar at each point.

Yes, electric fields can affect magnetic fields and vice versa. Electric and magnetic fields are intimately related and form two sides of the same coin, as described by Maxwell's equation of electromagnetism.

To learn more about magnet, visit here:

https://brainly.com/question/2841288

#SPJ1

A

Explanation: sorry sir but its required step up transformer for high voltage not step

We can use Coulomb's Law to solve this problem:

F = k * (q1 * q2) / r^2

where:

F = -5.5 N

k = Coulomb's constant (9.0 x 10^9 N·m^2/C^2)

q1 = charge of the balloon (-1.0 x 10^-6 C)

q2 = charge of the steel tube= ?

r = distance between the balloon and the steel tube (0.97 m)

Plugging in the given values and solving for q2:

-5.5 N = (9.0 x 10^9 N·m^2/C^2) * (-1.0 x 10^-6 C) * q2 / (0.97 m)^2

Solving for q2, we get:

q2 = (-5.5 N) * (0.97 m)^2 / [(9.0 x 10^9 N·m^2/C^2) * (-1.0 x 10^-6 C)]

q2 ≈ -6.4 x 10^-6 C

Therefore, the charge of the steel tube is approximately -6.4 x 10^-6 C.

read more about coulomb's law on

https://brainly.com/question/26892767

Answer: When two plates are moving away from each other, we call this a divergent plate boundary. Along these boundaries, magma rises from deep within the Earth and erupts to form new crust on the lithosphere. Most divergent plate boundaries are underwater and form submarine mountain ranges called oceanic spreading ridges.

Explanation:

I HOPE THIS HELPED YOU I AM OPEN IF YOU WANTS ANSWERS GOOD LUCK BY THE WAY!

Answer:

sorryyyyijyyyyyyyyyyyyyyyyyyyy&

Explanation:

soryyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyyy

A normative approach to lifespan development involves studying and comparing the typical patterns of development and behavior across different individuals or groups of people at various ages. Here are some benefits of using this approach:

Identifying developmental milestones: A normative approach helps to identify the typical milestones and achievements that people reach at different ages, such as crawling, walking, talking, and reading. This can help parents, educators, and healthcare professionals to monitor and assess a child's development and provide appropriate support and interventions when necessary.

Understanding individual differences: While a normative approach focuses on typical patterns of development, it also recognizes that there are individual differences in development and behavior. By comparing people's development to the norm, we can better understand how and why some individuals may differ from the norm, such as in terms of their physical, cognitive, or socioemotional development.

Informing public policies and interventions: A normative approach can help to inform public policies and interventions that support healthy development across the lifespan. For example, knowledge about the typical milestones of development can inform early childhood education programs, while information about the typical age-related changes in cognition and memory can inform policies related to employment and retirement.

Flashlight: The flashlight typically uses multiple batteries, arranged in series to provide a higher voltage output.

In continuation, The number and type of batteries used in a flashlight can vary depending on the model, but a common arrangement is to use two or three 1.5V AA batteries. The batteries are connected in series, with the positive end of one battery connected to the negative end of the next battery, and so on.

Secondly, 2-way radio:

A 2-way radio also typically uses multiple batteries, arranged in series to provide a higher voltage output. Again, the number and type of batteries used can vary depending on the model, but a common arrangement is to use four or six 1.5V AA batteries. The batteries are connected in series, with the positive end of one battery connected to the negative end of the next battery, and so on.

Therefore, Note that the arrangement of batteries in series increases the total voltage produced by the batteries.

Read more about battery  here:

https://brainly.com/question/14883923

#SPJ1

Answer:

The first law of thermodynamics, also known as the law of conservation of energy, states that energy cannot be created or destroyed, only transferred or transformed from one form to another. In other words, the total energy of a closed system and its surroundings remains constant.

When applying this law to a system/surrounding model, the energy exchanged between the system and its surroundings can take different forms, such as heat, work, or a combination of both. For example, if a gas is compressed in a piston, work is done on the gas by the surroundings, increasing the internal energy of the gas. Alternatively, if a gas is heated, energy is transferred to the gas from the surroundings, increasing the internal energy of the gas.

Overall, the first law of thermodynamics serves as a fundamental principle in the study of thermodynamics, allowing us to analyze and predict energy transfers and transformations in various physical and chemical systems.

Explanation:

The two sentences that best state the central ideas of Wiesel's speech are:

Elie Wiesel's speech focuses primarily on the Holocaust and the atrocities that were committed during that time, particularly at Auschwitz. The central ideas of his speech are:

More on Wiesel's speech can be found here: https://brainly.com/question/30338903

#SPJ1

Answer:

What all topics do you have?

Answer:

the factor of 2is 78

Explanation:

7th 8th is 9th is 3th which is 90000

Answer:

2.1 The principle of conservation of linear momentum states that in the absence of any external forces, the total momentum of a system remains constant. This means that the total momentum before an event is equal to the total momentum after the event.

2.2 To solve the problem, we can use the principle of conservation of linear momentum, which states that the momentum of the system before the learner jumps on the skateboard is equal to the momentum of the system after the learner jumps on the skateboard.

Explanation:

Answer:

the answer is A) $5.76.

We found in the previous problem that the air conditioner uses 32 kWh per day. To find the cost, we multiply the number of kWh by the cost per kWh:

32 kWh/day x $0.18/kWh = $5.76/day

So, it costs $5.76 per day to run the air conditioner.

Therefore, the answer is A) $5.76.

the work done by the resultant force during this time interval is 106.0 J.

What is the principle that relates the work done by the net force on an object to its change in kinetic energy?

To find the work done by the resultant force on the particle, we need to use the work-energy principle, which states that the work done by the net force on an object is equal to its change in kinetic energy.

First, we need to find the net force acting on the particle. We can use Newton's second law, which states that the net force is equal to the mass times the acceleration:

F_net = m*a

To find the acceleration, we can use the formula:

a = (v_f - v_i) / t

where v_f is the final velocity, v_i is the initial velocity, and t is the time interval.

a = [(7.0i+3.0j) m/s - (5.0i-4.0j) m/s] / t

a = (2.0i+7.0j) m/s / t

Now we can calculate the net force:

F_net = m*a

F_net = 2.0 kg * (2.0i+7.0j) m/s / t

F_net = (4.0i+14.0j) N / t

Next, we need to calculate the work done by this net force during the time interval. Since the force is not constant, we need to use the work-energy principle in integral form:

W = integral(F_net dot ds)

where dot denotes the dot product, and ds is the infinitesimal displacement vector.

To perform this integration, we need to know the path of the particle. Let's assume that the particle moves in a straight line from its initial position to its final position.

Then, the displacement vector is given by:

ds = (v_f - v_i) * t

ds = [(7.0i+3.0j) m/s - (5.0i-4.0j) m/s] * t

ds = (2.0i+7.0j) m * t

Now we can calculate the dot product between the net force and the displacement vector:

F_net dot ds = (4.0i+14.0j) N / t dot (2.0i+7.0j) m * t

F_net dot ds = 8.0 N + 98.0 N

F_net dot ds = 106.0 J

Therefore, the work done by the resultant force during this time interval is 106.0 J.

To learn more about work done follow the given link: https://brainly.com/question/25573309

#SPJ1

Answer:

An object can become positively charged by losing electrons, but it cannot become positively charged by gaining protons. This is because the charge on an object depends on the balance of protons and electrons it has. Protons have a positive charge, while electrons have a negative charge. So, when an object gains electrons, it becomes negatively charged because it now has more negative charges than positive charges. On the other hand, when an object loses electrons, it becomes positively charged because it now has more positive charges than negative charges.

However, protons cannot be gained or lost easily because they are tightly bound within the atomic nucleus of an atom, and they are not free to move around like electrons. Therefore, the only way for an object to become positively charged is to lose electrons, not by gaining protons.

Explanation:

Answer:

True

False

True

True

True

Explanation:

Light is measured by its wavelength (in nanometers). It is usually characterized by the Greek symbol λ. Visible light is usually defined as having wavelengths in the range of 400–700 nanometers (nm) or one billionth of a meter.

Light travels faster in vacuum than any other medium. This is because there is no obstruction in vacuum for the propagation of light and thus, the refractive index of vacuum is the lowest.

Brightness is used to describe how bright somthing is

The shorter the wavelengths and higher the frequency corresponds with greater energy. So the longer the wavelengths and lower the frequency results in lower energy.

In order from highest to lowest energy, the sections of the EM spectrum are named: gamma rays, X-rays, ultraviolet radiation, visible light, infrared radiation, and radio waves.

The thermal cοnductivity οf the material is 0.024 W/(m·K).

We can use the fοrmula fοr heat transfer thrοugh a material with a temperature difference and knοwn surface area:

Q/t = kA(T1-T2)/d

where Q/t is the rate οf heat transfer (pοwer) prοvided by the electric heater,

k is the thermal cοnductivity οf the material,

A is the surface area οf the cοntainer,

d is the thickness οf the walls,

T1 is the temperature inside the cοntainer, and

T2 is the temperature οutside the cοntainer.

Plugging in the given values:

Q/t = 10.0 WA = 1.10 m²d = 0.04 mT1 - T2 = 13.0 °C

We can rearrange the fοrmula tο sοlve fοr k:

k = Qtd / (A*(T1-T2))

Plugging in the values and cοnverting units tο SI units:

k = (10.0 W)(1 s)(0.04 m) / (1.10 m² * 13.0 K) = 0.024 W/(m·K)

Therefοre, the thermal cοnductivity οf the material is 0.024 W/(m·K).

To learn more about thermal conductivity follow the given link:

https://brainly.com/question/14919402

#SPJ1

We can see here that carrying out the experiment and comparing your reaction time with that of your partner, we see that if one person has a faster reaction time, possible reasons could be faster reflexes or better anticipation of when the ruler will be released.

Reaction time is the interval of time that elapses between the presentation of a stimulus and the initiation of a response. It is the time it takes for an individual to process and react to a stimulus, such as a sound, sight, or touch.

Carrying the experiment, we assume that the data table is gotten thus:

Trial Centimeter Mark

1 20

2 17

3 21

4 19

5 18

To change centimeters to meters, divide the average centimeter mark by 100. So, the average centimeter mark is

(20+17+21+19+18)/5 = 19 cm,

which is equal to 0.19 meters.

To calculate reaction time, we can use the formula:

t = √(2d/g)

where t is the reaction time, d is the distance traveled by the ruler, and g is the acceleration due to gravity (9.8 m/s^2).

Assuming the distance traveled by the ruler is equal to the distance between the top of the ruler and the point where it was caught by the fingers, we can calculate the reaction time as follows:

t = √(2 x 0.19 / 9.8) = 0.197 seconds ≈ 0.2 seconds.

Learn more about reaction time on https://brainly.com/question/6167212

#SPJ1

The answer to the given question is 150Kg. The leatherback sea turtle weighs about 150 kg.

To calculate the mass of the Leatherback sea turtle, we can use the formula for kinetic energy:

KE = 1/2 × m × v²

where KE is the kinetic energy, m is the mass of the object, and v is the velocity.

Given that the Leatherback sea turtle has a kinetic energy of 12 J while swimming at 0.2 m/s, we can plug in these values into the formula and solve for the mass:

12 J = 1/2 × m × (0.2 m/s)²

12 J = 1/2 × m × 0.04 m²/s²

m = (12 J) / (1/2 × 0.04 m²/s²)

m = 150 kg

Therefore, the mass of the Leatherback sea turtle is approximately 150 kg.

The Leatherback sea turtle is known for being the largest of all living sea turtles, with an average weight of around 500 to 1500 pounds (225 to 680 kg). Its size and weight enable it to swim vast distances across the ocean, traveling from nesting beaches to feeding grounds.

By using the formula for kinetic energy and the given values of velocity and kinetic energy, we can calculate the mass of the Leatherback sea turtle. The mass of the Leatherback sea turtle is significant, weighing approximately 150 kg, which is required for it to be able to swim through the vast oceans.

To know more about kinetic energy click here

brainly.com/question/15764612

#SPJ1

The area οf the clοud that was struck by lightning had a negative charge, sο, οptiοn (d) is cοrrect.

The negatively charged atοm's electrοns are respοnsible fοr this. An atοm's tοtal negative charge, which is prοduced by all οf its electrοns, cοunteracts the pοsitive charge οf the prοtοns in the atοmic nucleus.

Prοtοns and electrοns, which functiοn as charge carriers, frequently carry bοth pοsitive and negative electric charges. By mοving charges, energy is prοduced. Charge—alsο referred tο as electric charge, electrical charge, οr electrοstatic charge—is a prοperty οf a unit οf matter in physics and is denοted by the letter q.

Therefοre, The area οf the clοud that was struck by lightning had a negative charge, sο, οptiοn (d) is cοrrect.

Learn more about electrons from the given link.

https://brainly.com/question/13998346

#SPJ1

The relationship is , the square of the period of an orbit is proportional to the cube of its Orbital Radius.

The relationship between orbital radius and period is described by Kepler's Third Law of Planetary Motion, which states that the square of the period of an orbit is proportional to the cube of its semi-major axis.

In other words, if we denote the orbital radius (semi-major axis) by "a" in units of astronomical units (AU) and the period by "T" in years, then:

a³ = (T²)k

where;

For objects orbiting the sun, k is approximately equal to 1.

So, if you know the orbital radius of an object around the sun, you can use Kepler's Third Law to calculate its period, or vice versa.

Learn more about orbital radius here: https://brainly.com/question/16672332

#SPJ1

The rocket's x and t coordinates are 688.32 meters and 277.44 meters, respectively, from where it will launch.

Velocity, as opposed to speed, refers to the pace & direction of such an object's movement as it moves down a path. In other respects, whereas velocity is a scalar, speed is really a scale parameter.

Speed does not necessarily have to match average velocity in magnitude. Many people mistakenly believe that cruising velocity and flow rate are merely two different labels for the same quantity. Nevertheless, average speed relies on both distance and displacement.

To know more about Velocity visit:

https://brainly.com/question/17127206

#SPJ9

Answer:

Trials 1-10 were bigger than 11-20, so it is different.

Explanation:

brainlyist pls

Answer:

1.9 m/s

Explanation: