Answer:
A. 20 N down
Explanation:
It's asking how much force of gravity is acting on it. The book weighs 20 Newtons so that's how much gravity is being applied. Hope this helps
When a book that weighs 20 N sits on a table. then the force of gravity from the Earth acts on the book would be 20 N down, therefore the correct option is A.
What is gravity?It can be defined as the force by which a body attracts another body towards its center as the result of the gravitational pull of one body and another, The gravity varies according to the mass and size of the body for example the force of gravity on the moon is the 1/6th times of the force of gravity on the earth.
When an object is thrown straight up in the absence of air resistance there is no external force acting on it except the gravitational force of the earth which very much reflects the fact that the acceleration due to gravity is constant and is the result of the gravitational pull of the earth which act on the downward direction.
A book that weighs 20 N sits on a table and faces a downward force of 20N acts on the book because the force of gravity from the Earth acts on the book.
Learn more about gravity from here
https://brainly.com/question/4014727
#SPJ5
how does increasing and decreasing the temperature affect the kinetic energy of molecules?
Answer:
Amontons's law. If the temperature is increased, the average speed and kinetic energy of the gas molecules increase. ... If the gas volume is decreased, the container wall area decreases and the molecule-wall collision frequency increases, both of which increase the pressure exerted by the gas
Whaf can be the most dangerous part of a hurricane?
Answer:
The inside of a hurricane
Explanation:
You will die
Which one of the following statements is true: The reactive power is the power dissipated in the form of heat by the network. The reactive power is the power delivered to a load without considering the effects of the power-factor angle of the load. The apparent power is the power delivered to a load without considering the effects of the power-factor angle of the load. The real power is the power associated with reactive elements that provides a measure of the energy associated with setting up the magnetic and electric fields.
Answer:
The apparent power is the power delivered to a load without considering the effects of the power-factor angle of the load
Explanation:
If I and V are the current and voltage across the load, the apparent power, = IV
Since,
apparent power = active power + reactive power
active power = IVcosФ
reactive power = IVsinФ
So, IV = IVcosФ + IVsinФ
where I = current, V = voltage and Ф = power factor angle.
We see that the apparent power is the product of the current, I and the Voltage, V without considering the power factor angle of the load.
So, the apparent power is the power delivered to a load without considering the effects of the power-factor angle of the load.
According to Newton’s second law, the mass of an object is 120kg and it is accelerating at a rate of 5m/s2 . The object’s force would be
Answer:
F = 600 N
Explanation:
The second law is F = m * a
The mass (m) is in kg = 120
The acceleration in in m/s^2 = 5
The force is in Newtons.
m and a do not require any conversions. They are in the correct units.
F = 120 * 5
F = 600 N
What is the temperature increase of 4.0 kg of water when it is heated by an 8.0 ^102 W immersion heater for exactly 10.0 min? (cp = 4186 J/kg·°C)
Answer:
ΔT = 28.667°C is the answer.
Explanation:
Given,
Mass of water = 4.0 kg
Water is heated by = 8 × 10² W = 800 W
Time = 10 min = 10 × 60 = 600 s
Now,
using the equation of specific heat,
Q = mcΔT
where c is the specific heat capacity of water = 4186 J/kg°C
Q = Pt
Substituting,
Pt = mcΔT
800 × 600 = 4 × 4186 × ΔT
480000 = 16744 × ΔT
ΔT = 28.667
∴Temperature increased, ΔT = 28.667°C
3. A crane can lift a 5000 N object to height of 30 m in 120 seconds. The power at which the crane is
operating is:
a 125 Watts
b. 1250 Watts
c. 7500 Watts
d. 250,000 Watts
A Cathode of initial mass 10.00g weigh to 10.05g
after a Current of SA passes through the voltmeter of 10 minutes - Calculate the E.C.E of the metal deposed
Answer:
i'm sorry i'm not a physics student
You have been offered an admission to a senior high school to persue a programme you like. Write a letter to the headteacher of your former school stating at least two reasons why you are happy with the programme you have been offered in 250 words.
Answer:
Find the letter below.
Explanation:
1237 Richmond Avenue,
Houston, Texas,
U.S.A.
3rd May, 2021.
The Principal,
Carnegie Vanguard High School,
Houston, Texas,
U.S.A.
Dear Sir,
APPRECIATION FOR THE ADMISSION OFFER IN YOUR SCHOOL
I humbly write this letter to express my sincere appreciation for the offer of admission in your highly esteemed institution of learning. The admission letter states that I was admitted to pursue a programme in Computer Science and this is a source of great delight for me. The opportunity is a unique one because I stand a great chance of acquiring deeper knowledge of programming software that will prove invaluable to me in my future career.
Over the years, I have been particularly thrilled with all the inventions that have been made possible with information technology and programming of many useful software. These inventions have made life a lot easier, hence my interest in getting the required knowledge that will enable me to contribute my quota to the society.
This programme will also afford me the opportunity to relate with seasoned professionals in the field of Information Technology. When in contact with these professionals, I hope to ask them several questions on programming, the technicalities involved in it, and what is obtainable in the real-world scenario. Armed with these pieces of information, I believe that the programme will shape me to be an excellent professional that will be useful to the society.
Once again, thank you for this very special opportunity. I hope to fully maximize the privilege.
Yours Sincerely,
Jessica Liam.
Tammy is a forensic investigator examining a body at a crime scene. She notes that the body is stiff but still flexible. What does she know about the time of death?
Answer:
It happened less than 8 hours ago.
Explanation:
Over the first eight hours, the body begins to stiffen but is still flexible.
Sally performed an experiment.The measurement was taken three times.
68.152 ml 68:154 ml 68.160 ml
The correct measurement was 68.2 ml. Is Sally's measurement accurate, precise,or
neither?
A. accurate
B. precise
C. both
D. neither accurate nor precise
Please answer correctly!!.....
Answer:
accurate it means trying to find accurate or exact value. or tends to find exact value,
Explanation:
any tips for an ollie ?
Answer:
skateboard mid-ollie is being actively steered. This is exactly what makes doing an ollie so hard. It's not enough to get the skateboard up into the air - you also have to steer it while it's in the air. You should keep your hands up in the hair a bit to help with balance, scrunch your legs a bit down to have a proper and effective jump. wear nee pads incase you dont fix the landing. Practice jumping on ur skate board tho, if u jump at it without knowing much youll just get hurt.
Explanation:
Consider 2 steel rods, A and B, B has three times the area and twice the length of A, so young modulus of B will be what factor times young modulus of A?
Answer:
[tex]\frac{Y}{Y_o}[/tex] = 2/3
Explanation:
The yuong modulus of a rod is defined as the relationship between the tensile strength and the strain
Y = [tex]\frac{ \frac{F}{A} }{\frac{\Delta L}{L_o} }[/tex]
let's use the subscript "o" for rod A
I = [tex]\frac{ \frac{F}{A_o} }{ \frac{\Delta L}{L_o} }[/tex]
tells us that rod B has
A = 3 A₀
L = 2 L₀
we substitute
Y = [tex]\frac{ \frac{F}{A} }{ \frac{\Delta L}{L} }[/tex]
Y = [tex]\frac{ \frac{F}{3A_o} }{ \frac{\Delta L}{ 2L_o} }[/tex]
y = ⅔ [tex]\frac{ \frac{F}{A_o}}{ \frac{\Delta }{L_o} }[/tex]
substituting the value of Y₀
Y = ⅔ Y₀
[tex]\frac{Y}{Y_o}[/tex] = 2/3
can someone please solve this
Answer:
The gravity is pulling the diver downwards but the rotation of the body means gravity cant pull him down as quickly
Explanation:
Scavengers are organisms that help clean a habitat by feeding on dead or rotting flesh. They help break down the remains left behind by carnivores. Vultures and maggots (baby flies) are common scavengers.
Decomposers are organisms that break down the remains of dead animals or plants. Many live in or on the soil. Fungi and bacteria are examples of decomposers.
Which of the following is an example of decomposers at work?
a. a fish eating dead seaweed floating in the water
b. a vulture picking apart a dead mouse in the woods
c. a squirrel gnawing at a dead bird on the ground
d. a fungus growing on a rotten tomato, breaking down its skin
Answer:
I think no B
if wrong correct me pls
have a nice day
#Captainpower
좋은 하루 되세요
#캡틴 파워
Answer: B
Explanation:
Vultures and maggots (baby flies) are common scavengers. Decomposers are organisms that break down the remains of dead animals or plants. ... Green plants are called producers because they take energy from sunlight and produce food in which the energy is stored.
While traveling along a highway a driver slows from 31 m/s to 15 m/s in 8 seconds. What is the automobile’s acceleration? (Remember that a negative value indicates a slowing down or deceleration.)
Answer:
The automobile's acceleration in that time interval is -2 m/s^2
Explanation:
The acceleration is defined as the rate of change of the velocity.
The average acceleration in a given lapse of time is calculated as:
A = (final velocity - initial velocity)/time.
In this case, we have:
initial velocity = 31 m/s
final velocity = 15 m/s
time = 8 seconds.
Then the average acceleration is:
A = (15m/s - 31m/s)/8s = -2 m/s^2
How are frequency and period related?
They are directly related.
They are inversely related.
They aren't related.
Please answer this
No links please
define the artificial silk?
Answer:
Artificial silk or art silk is any synthetic fiber which resembles silk, but typically costs less to produce.
Explanation:
Answer:
Artificial silk or art silk is any synthetic fiber which resembles silk, but typically costs less to produce. Frequently, "artificial silk" is just a synonym for rayon. When made out of bamboo viscose it is also sometimes called bamboo silk.
can someone pls help with the last one
Answer:
ummmmmmmmmmmm ask your teacher or perant for help
Explanation:
so umm ask an adult or teen figure and maybe you will get it write not sure do
If the battery has a voltage of 24 Volts, Find the current when switch is closed.
Answer:
6amps
Explanation:
The question is not complete
Given data
voltage= 24volts
Say we have a resistance of 4 ohms
We can then find the current using the formula
V= IR
substitute
24= I*4
I= 24/4
I= 6 amps
Hence the current when the voltage is 24volt and a resistance of 4 ohms is
6amps
A 5kg object is moving downward at a speed of 12m/s. If it is currently 2.6m above the ground, what is its kinetic energy?
Answer:
360J
Explanation:
In physics, the kinetic energy of an object is the energy that it possesses due to its motion. It is defined as the work needed to accelerate a body of a given mass from rest to its stated velocity. Having gained this energy during its acceleration, the body maintains this kinetic energy unless its speed changes. The same amount of work is done by the body when decelerating from its current speed to a state of rest.
Please help!! giving a lot of points
A rollercoaster cart that has a mass of 4500 kg has 67.5 kJ (kilojoules), or 67,500 J (joules), of gravitational potential
energy. What is its height above the ground?
PT.2
The same 4500 kg rollercoaster cart is moving with 63.0 kJ (kilojoules), or 63,000 J (joules), of kinetic energy at the
bottom of its biggest hill. What is its velocity?
Question 1.
mass = 4500 kgpotential energy (p.e) = 67500 Jnow, we know :
=》
[tex]p.e = mgh[/tex]
=》
[tex]67500 = 4500 \times 10 \times h[/tex]
=》
[tex]67500 = 45000 \times h[/tex]
=》
[tex]h = \dfrac{67500}{45000} [/tex]
=》
[tex]h = 1.5 \: m[/tex]
note : if we take acceleration due to gravity as 9.8, then height = 1.53 m
Question 2.
mass = 4500 kgkinetic energy = 63000 jwe know,
=》
[tex]k.e = \dfrac{1}{2} mv {}^{2} [/tex]
=》
[tex]63000 = \dfrac{1}{2} \times 4500 \times {v}^{2} [/tex]
=》
[tex] {v}^{2} = \dfrac{63000 \times 2}{4500} [/tex]
=》
[tex] {v}^{2} = 28[/tex]
=》
[tex]v = \sqrt{28} [/tex]
=》
[tex]v = 2 \sqrt{7} \: \: ms {}^{ - 1} [/tex]
or
=》
[tex]5.29 \: \: ms {}^{ - 1} [/tex]
A 1200 kg car accelerates from rest to 10.0 m/s in a time of 4.50 seconds. Calculate the force that the car’s tires exerted on the road.
please help me i need the answer in 10 mins
Answer:
the force that the car’s tires exerted on the road is 2,666.67 N.
Explanation:
Given;
mass of the car, m = 1,200 kg
initial velocity of the car, u = 0
final velocity of the car, v = 10.0 m/s
time of motion, t = 4.50 s
The force the car’s tires exerted on the road is calculated as follows;
[tex]F = ma= \frac{m(v-u)}{t} \\\\F = \frac{1200(10-0)}{4.5} \\\\F = 2,666.67 \ N[/tex]
Therefore, the force that the car’s tires exerted on the road is 2,666.67 N.
Which has a higher temperature: a snowman or a lit match ?
Answer:
snowman
Explanation:
the snowman has more heat energy as it has more molecules whilst the burning match has less. therefore its has more total kinetic (moving) energy
Explain why the weather changes with the season's temperate climate zones.
A harmonic oscillator is described by the function
x(t) = (0.290 m) cos(0.390t).
Find the oscillator's maximum velocity and maximum acceleration. Find the oscillator's position, velocity, and acceleration when t = 2.50 s.
(a)
oscillator's maximum velocity (in m/s)
m/s
(b)
oscillator's maximum acceleration (m/s2)
m/s2
(c)
oscillator's position (in m) when t = 2.50 s
m
(d)
oscillator's velocity (in m/s) when t = 2.50 s
m/s
(e)
oscillator's acceleration (in m/s2) when t = 2.50 s
m/s2
Cuales podrian ser las causas y consecuencias del aumento de problemas de salud mental en la población chilena
Explanation:
CAUSAS:
-El gobierno de chile ha destinado el 2% de sus recursos de salud pública para tratar los problemas de salud mental,lo cual es insuficiente debido a la alta demanda de pacientes que requieren atención especializada. Según la OMS (organización mundial de la salud) , cada gobierno debería destinar al menos el 5% de sus recursos para tratar este tipo de patologías o enfermedades mentales como la depresión,la ansiedad u otros trastornos bipolares
- El personal capacitado para tratar este tipo de enfermedades es muy escaso.
- Muchos de los chilenos que padecen este tipo de enfermedades no buscan ayuda inmediata, algunos recurren al alcohol o a los vicios como el cigarrillo o la marihuana , pensando que lograrán calmar la ansiedad o sus preocupaciones pero en realidad sucede lo contrario, aumentan la depresión y la ansiedad.
-Los problemas sociales, la crisis económica y el aumento de la pobreza así como el limitado acceso que tiene la población pobre chilena a un buen sistema de salud integrado,genera un significativo aumento de problemas de salud mental en especial en la población pobre o más desfavorecida del país.
CONSECUENCIAS:
Debido a los problemas de salud mental las incapacidades laborales han aumentado, afectando la economía del país.
Debido a la falta de tratamiento ,el suicidio y otras enfermedades como la esquizofrenia han aumentado. De igual manera la violencia intrafamiliar se ha incrementado e inclusive hasta los niños están empezando a sufrir este tipo de trastornos o enfermedades mentales,lo cual está afectando su desempeño escolar.
Help me out please, don't send links
Answer:
==> C. represent troug of a transverse wave
is the correct answer of this question
hope it helps
Calcula la cantidad de calor que hay que darle a 0,01 l de mercurio para que su temperatura pase de 10 ºC a 25 ºC. Datos: rho=13,6 g/cm3 ; Ar(Hg)=200,6; C=28,1 J/(mol∙K).
Respuesta:
286 J
Explicación:
Paso 1: Convertir 0,01 L de Hg a cm³
Usaremos los siguientes factores de conversion.
1 L = 1000 mL
1 mL = 1 cm³
0,01 L × 1000 mL/1 L × 1 cm³/1 mL = 10 cm³
Paso 2: Calcular la masa (m) correspondiente a 10 cm³ de Hg
La densidad de Hg es 13,6 g/cm³.
10 cm³ × 13,6 g/cm³ = 136 g
Paso 3: Calcular los moles(n) correspondientes a 136 g de Hg
La masa molar de Hg es 200,6 g/mol.
136 g × 1 mol/200,6 g = 0,678 mol
Paso 4: Calcular la cantidad de calor requerido (Q)
Usaremos la siguiente fórmula.
Q = c × n × (T₂ - T₁)
donde,
c: calor específico del Hg (28,1 J/mol.K = 28,1 J/mol.K)
T₂ y T₁: temperaturas final e inicial, respectivamente
Q = (28,1 J/mol.°C) × 0,678 mol × (25°C - 10 °C) = 286 J
A 20.0 Ohm and 60.0 Ohm resistor
are connected in series to a 9.00 V
battery. What is their equivalent
resistance?
(Unit = Ohms)
Answer:
for resistors in series, add the resistances to get their equivalence. The answer is
80.0 Ohms