Answer: Contant.
Explanation:
You are given that When the boat moves the force of resistance is proportional to the velocity of the boat. This means that the total momentum on the boat is equal to zero. Then the boat remains at a certain position.
When a person walks from the stern to the bow of the boat, the boat will tend to move in the opposite direction with equal magnitude of momentum. The magnitude of forces will thereby cancel out.
The person will be seen moving while the boat moves in the opposite direction.
If no external force is acting on the boat, the sum of the momentum of the person and the boat will be equal to zero. And the boat will remain at rest.
The position of the boat long time after the person stopped moving will therefore remain the same.
A square loop 24.0 cm on a side has a resistance of 6.10Ω. It is initially in a 0.665-T magnetic field, with its plane perpendicular to magnetic field B but is removed from the field in 40.0ms. Calculate the electric energy dissipated in this process.
Answer:
[tex]E=6.01\times 10^{-3}\ J[/tex]
Explanation:
It is given that,
Side of a square loop, l = 24 cm = 0.24 m
Resistance of loop, R = 6.1 ohms
Initial magnetic field is 0.665 T and final magnetic field is 0 as the field is removed in 40 ms
We need to find the electrical energy dissipated in this process.
Due to change in magnetic field, the loop will induce a voltage. The induced voltage is given by :
[tex]V=-\dfrac{dB}{dt}\\\\V=\dfrac{BA}{t}[/tex]
If I is induced current then,
[tex]V=IR[/tex]
[tex]I=\dfrac{V}{R}\\\\I=\dfrac{BA}{tR}[/tex]
Power is given by voltage times current. So,
[tex]P=\dfrac{(BA)^2}{(t^2R)}[/tex]
Now, energy is given by the product of power and time. So,
[tex]E=\dfrac{(BA)^2}{(t^2R)}\times t\\\\E=\dfrac{(BA)^2}{(tR)}[/tex]
Now putting all the values in above formula. So,
[tex]E=\dfrac{(0.665\times (0.24)^2)^2}{(40\times 10^{-3}\times 6.1)}\\\\E=6.01\times 10^{-3}\ J[/tex]
So, the electrical energy of [tex]6.01\times 10^{-3}\ J[/tex] is dissipated in this process.
The electrical energy dissipated throughout this process will be "6.01 × 10⁻³ J".
Magnetic fieldAccording to the question,
Square loop's side, l = 24 cm or,
= 0.24 m
Loop's resistance, R = 6.1 ohms
Initial magnetic field = 0.665 T
Final magnetic field = 0
We know the relation,
→ V = - [tex]\frac{dB}{dt}[/tex]
= [tex]\frac{BA}{t}[/tex]
Also we know,
Current, V = IR
I = [tex]\frac{V}{R}[/tex]
= [tex]\frac{BA}{tR}[/tex]
Now, Energy, E = [tex]\frac{(BA)^2}{t^2R}[/tex] × t or,
= [tex]\frac{(BA)^2}{tR}[/tex]
By substituting the values,
= [tex]\frac{(0.665\times (0.24)^2)^2}{40\times 10^{-3}\times 6.1}[/tex]
= 6.01 × 10⁻³ J
Thus the response above is correct.
Find out more information about magnetic field here:
https://brainly.com/question/26257705
A ray of light is projected into a glass tube that is surrounded by air. The glass has an index of refraction of 1.50 and air has an index of refraction of 1.00. At what minimum angle will light in the glass tube be totally reflected at the glass/air interface?
Answer:
θ = 41.8º
Explanation:
This is an internal total reflection exercise, the equation that describes this process is
sin θ = n₂ / n₁
where n₂ is the index of the incident medium and n₁ the other medium must be met n₁> n₂
θ = sin⁻¹ n₂ / n₁
let's calculate
θ = sin⁻¹ (1.00 / 1.50)
θ = 41.8º
PLEASE HELP ME ASAP. IT'S VERY IMPORTANT
Answer:
1) a. 52.41 m/s
b. The skier will be going 15.35 m/s slower
2) 103.68 m
3) 35,127 J
4) a. 88.825 kJ
(b) 16.36 %
5) 3,071.12 J
Explanation:
1) a. The given height of the hill, h = 140.0 m
The mass of the skier at the top of the hill, m = 85.0 kg
The acceleration due to gravity, g = 9.81 m/s²
The initial potential energy, P.E of the skier = m×g×h = 85.0×140.0×9.81 = 116739 J
From the principle of conservation of energy, we have;
The potential energy, P.E. lost = The gain in kinetic energy, K.E.
m×g×h = 1/2×m×v²
116739 J = 1/2×85.0×v²
v² = 116739/(1/2*85.0)= 2746.8 m²/s²
v = √(2746.8 m²/s²) = 52.41 m/s
b. From 70 m up, we have;
The initial potential energy, P.E., of the skier is now = 85.0×70×9.81 = 58,369.5 J
The potential energy, P.E. lost = The gain in kinetic energy, K.E.
58,369.5 J = 1/2×85.0×v²
v² = 58,369.5/(1/2*85.0) = 1373.4 m²/s²
v = 37.06 m/s
The skier will be going 52.41 - 37.06 = 15.35 m/s slower
The skier will be going 15.35 m/s slower
2) From the principle of conservation of energy, the amount of work done (energy used) = The (potential) energy gained by the load
The amount of work done by the electric hoist = 356,000 J
The mass of the load = 350.0 kg
The height to which the load is raised = h
The potential energy gained by the load = m×g×h = 350.0×9.81×h
356,000 J = 350.0×9.81×h
h = 356,000/(350.0*9.81) = 103.68 m
The height to which the load is lifted= 103.68 m
3) The initial potential energy of the roller coaster cart = 600*35.0*9.81 = 206010 J
The final potential energy = 600*28.0*9.81= 164808 J
The velocity at point 3 = 4.5 m/s
The kinetic energy at point 3 = 1/2*600*4.5^2 = 6075 J
The total energy at point 3 = 164808 + 6075 = 170,883 J
The energy loss = The initial potential energy at point 1 - Total energy at point 3
The energy loss = 206010 - 170,883 = 35,127 J
The heat energy due to friction that must have been produced between points 1 and 3 = 35,127 J
4) a. The heat energy absorbed = mass × specific heat capacity for water, [tex]C_{water}[/tex] × Temperature change
The mass of the water = 2.5×10² g = 0.25 kg
[tex]C_{water}[/tex] = 4,180 J/(kg·°C)
Initial temperature = 10.0°C
Final temperature = 95°C
The temperature change = 95.0°C - 10.0°C = 85.0°C
The heat energy absorbed = 0.25*4,180* 85 = 88,825 J = 88.825 kJ
(b) The percentage efficiency = (Heat absorbed/(Heat supplied)) × 100
The heat supplied = 543 kJ
The efficiency = (88.825/543) × 100 = 16.36 %
5) The mass of the box = 115 kg
Force acting on the rope = 255 N
The angle of inclination of the force to the horizontal = 24.5°
The distance the box is displaced = 15.0 m to the right
The work done = Force applied × distance moved in the direction of the force
The work done = Force applied × distance moved in the direction of the force
Given that the load moves a distance 15.0 m to the right,we have;
The component of the force acting in the direction of the movement of the load (to the right) is 225 × cos(24.5°) = 204.74 N
The work done = 204.7*15 = 3071.12 J
The amount of work done = 3,071.12 J
In the school cafeteria, a trouble-making child blows a 12.0 g spitball through a 25.0 cm straw. The force (F) in Newtons, of his breath as a function of the distance along the straw (x) in meters, can be modeled as a linearly decreasing function for the first half of the straw, followed by a constant force through the rest of the straw. The force decreases by half along the first half of the straw. Assume there is negligible friction and the straw is held horizontally.
(a) Sketch a plot of the force of his breath as a function of position along the straw, labeling the force at x = 0 as F0.
(b) If the spitball begins from rest and leaves the straw with a speed of 16 m/s, how much work is done on the spitball?
(c) What is the maximum force F0, that acts on the spitball?
Answer:
A.) Find the attached file
B.) 1.536 J
C.) 123N
Explanation:
Given that the force (F) in Newtons, of his breath as a function of the distance along the straw (x) in meters, can be modeled as a linearly decreasing function for the first half of the straw,
Half of the straw = 12.5 cm
Let Force F = dependent variable
And distance x = independent variable
A.) Find the attached file for the graph.
Sinnce the force decreases by half along the first half of the straw. Assume there is negligible friction and the straw is held horizontally
B.) Given that the mass M = 12g = 12/1000 = 0.012kg
And Velocity V = 16m/s
The workdone = the kinetic energy of the split ball
WD = 1/2mv^2
Substitutes m and V into the formula
WD = 1/2 × 0.012 × 16^2
WD = 1.536 Joule
C.) The maximum force acts on the spit ball will be at maximum kinetic energy.
Since work done = force × distance
Where distance = 12.5 cm
F × S = 1/2mv^2
Substitutes all the parameters
F × 0.0125 = 1.536
Make F the subject of formula
F = 1.536/0.0125
F = 122.88 N
The maximum force F0, that acts on the spitball is therefore equal to 123 N approximately.
We have that for the Question "(a) Sketch a plot of the force of his breath as a function of position along the straw, labeling the force at x = 0 as F0.
(b) If the spitball begins from rest and leaves the straw with a speed of 16 m/s, how much work is done on the spitball?
(c) What is the maximum force F0, that acts on the spitball?"
It can be said that
a) The sketch is attachedb) The workdone = [tex]1.536J[/tex]c) Maximum force = [tex]6.4N[/tex]From the question we are told
mass of spitball = 12g through a 25.0 cm straw
Generally the equation for workdone is mathematically given as
[tex]= \frac{1}{2}mv^2 - 0\\\\= \frac{1}{2} * 12*10^{-3} * 16^2\\\\= 1.536J[/tex]
Maximum force
[tex]w = \frac{1}{2}*\frac{x_0}{2}*\frac{F_0}{2} + x_0*\frac{F_0}{2}\\\\w = \frac{5}{8}x_0F_0[/tex]
Therefore,
[tex]F_0 = \frac{8w}{5x_0}\\\\F_0 = \frac{8*1.536}{5*25*10^[-2]}\\\\F_0 = 6.4N[/tex]
For more information on this visit
https://brainly.com/question/23379286
Radar uses radio waves of a wavelength of 2.5 m . The time interval for one radiation pulse is 100 times larger than the time of one oscillation; the time between pulses is 10 times larger than the time of one pulse. What is the shortest distance to an object that this radar can detect
Answer:
The minimum distance to the object that the radar can detect is 124.995 m
Explanation:
Here, we are to calculate the shortest distance to an object the radar in the question can detect.
Mathematically;
v = c/λ
Where v is the frequency, c is the speed of light and λ is the wave length
Thus;
v = (3 * 10^8)/2.5 = 1.2 * 10^8 Hz
Mathematically, the time period
t = 1/v = 1/(1.2 * 10^8) = 0.000000008333 = 8.333 * 10^-9 sec
From the question, we are told that the transmitting time is 100 times a single oscillation
Transmitting time = 100 * one oscillation
Hence Transmitting time = 100 * 8.33 * 10^-9 = 8.33 * 10-7
Mathematically;
Minimum distance =( Transmitting time * speed of light)/2 =
(8.33 * 10^-7 * 3 * 10^8)/2 = 124.995 m
please help me with this
Answer:
12 Ω
Explanation:
Data obtained from the question include:
Resistor 1 (R1) = 50 Ω.
Resistor 2 (R1) = 30 Ω.
Resistor 3 (R3) = 20 Ω.
Resistor 4 (R4) = R
Galvanometer reading = Zero deflection.
The Resistor 4 (R4) in the Wheatstone bridge can be obtained as follow:
Since the galvanometer gives zero deflection, it means the bridge is balanced. Therefore,
R1/R2 = R3/R4
50/30 = 20/R
Cross multiply
50 x R = 30 x 20
Divide both side by 50
R = (30 x 20)/50
R = 12 Ω
Therefore, the value of R in the wheatstone bridge is 12 Ω.
Iron man wears an awesome ironsuit.He is flying over high current carrying wire. Will he be affected?
Answer:
According to super hero logic , nothing will happen to him.
But according to science , yes he will get current shock but good news is that he wouldn't get elected until he is in contact with the wires.
He may / may not be affected but his suit will be damaged for sure as it is made of metal.
HOPE THIS HLEP AND PLSSSSS MARK AS BRAINLIEST AND THNXX :)
A monkey is sitting at the top of a tree 25 m high from the ground level. A person standing on the ground wants to feed the monkey. He uses a bow and arrow to launch the food to the monkey. If the person knows that the monkey is going to drop from the tree at the same instant that the person launches the food, how should the person aim the arrow containing the food? Group of answer choices
Answer:
He should aim it at the monkey
Explanation:
The question is related to projectile motion of an arrow from a bow such that the arrow is able to reach a specific target
Therefore, since the monkey is going to drop from the tree the instant the person launches the food, then for the monkey to be able reach the food, we have;
Final level position of the launched food should be ≥ The level of the monkey
As the monkey is dropping from the tree the destination of the launched food should be at the monkey so that before the food gets to the position where the monkey was when launching the food with the arrow, the monkey will be slightly lower so as to be able to catch the food or return up the tree to get the food rather than the food falling to the ground.
calculate the energy dissipated by an electric iron which draws a current of 5A from a240v power supply for 25minutes
Explanation:
Given,
I = 5 A
V = 240 V
T = 25 mins = 1500 sec
Now,
Energy dissipated = IVT= 5×240×1500 = 1800000 J
ride and average of 15mph for 30 miles, how long does it take?
Answer:
2 hrs
Explanation:
time = distance ÷ speed
What are the signs of the velocity, force, and acceleration (components) afterthe cart is released and is moving qway from the motion sensor? (The positive xdirection is toward the motion sensor, to the right.
Answer:
car is moving away its direction is negative.
the speed must also be negative.
speed this distance decreases the acceleration is negative and if the speed is increasing the acceleration is positive.
Explanation:
In the exercise they indicate that the direction to the motion sensor is positive, as they indicate that the car is moving away its direction is negative.
The speed of the car is
v = (x₂-x₁) / t
As the positions are negative, and the car moves away the speed must also be negative.
The analysis for acceleration must be very careful if the speed this distance decreases the acceleration is negative and if the speed is increasing the acceleration is positive.
Please answer this question
Explanation:
m = kg. v=m/s. g=m/s^2. h= m
>>1/2mv^2=mgh
>>1/2mv^2=mgh>> kg*(m/s)^2= kg*m/s^2*m
>>1/2mv^2=mgh>> kg*(m/s)^2= kg*m/s^2*m>>kg m^2/s^2=kg m^2/s^2 the fraction 1/2 won't be able to make any changes to to the dimensional expression of energy i.e half of energy is still energy therefore you can neglect the number .
>>kg m^2/s^2=kg m^2/s^2
>>J= J
Stopping distance of vehicles When brakes are applied to a moving vehicle, the distance it travels before stopping is called stopping distance. It is an important factor for road safety and depends on the initial velocity (v0) and the braking capacity, or deceleration that is caused by braking. A car travelling at speed 72km/hr suddenly applies the brake with the deceleration of 5m/s2. Find the stopping distance of the car.
Answer:
Stopping distance = 40m
Explanation:
Given the following :
Initial speed of vehicle before applying brakes = 72km/hr
Converting km/hr to m/s:
72km/hr = [(72 * 1000)m] / (60 * 60)
72km/hr = 72,000m / 3600s
72km/hr = 20m/s
Deceleration after applying brakes (-a) (negative acceleration) = - 5m/s^2
From the 3rd equation of motion:
v^2 = u^2 + 2as
Where v = final Velocity ; u= Initial Velocity ; a = acceleration and s = distance
Final velocity when the car stops will be 0
Therefore ;
v^2 = u^2 + 2as
0 = 20^2 + 2(-5)(s)
0 = 400 - 10s
10s = 400
s = 400/10
s = 40m
Therefore, the stopping distance of the car = 40 meters
Let us treat a helicopter rotor blade as a long thin
rod, as shown in Fig. 8–49. (a) If each of the three rotor
helicopter blades is 3.75 m long and has a mass of 135 kg,
calculate the moment of inertia of the three rotor blades
about the axis of rotation. (b) How much torque must the
motor apply to bring the blades from rest up to a speed
of 6.0 rev/s in 8.0 s?
Rotor
Answer:
(a) 1900 kg m²
(b) 8950 Nm
Explanation:
(a) The moment of inertia of a rod about its end is I = ⅓mL².
For 3 rods of mass m = 135 kg and length L = 3.75 m, the total moment of inertia is:
I = 3 (⅓ (135 kg) (3.75 m)²)
I = 1900 kg m²
(b) Net torque = moment of inertia × angular acceleration
∑τ = Iα
First, find the angular acceleration.
ω₀ = 0 rad/s
ω = 6.0 rev/s (2π rad/rev) = 37.7 rad/s
t = 8.0 s
α = (37.7 rad/s − 0 rad/s) / 8.0 rad/s = 4.71 rad/s²
∑τ = Iα
∑τ = (1900 kg m²) (4.71 rad/s²)
∑τ = 8950 kg m² / s²
∑τ = 8950 Nm
CAN YOU HELP ME IN THE FOLLOWING EQUATION THE SPEED IS V = A + BT. DETERMINE THE DIMENSIONS OF A AND B
Answer:
A = [m/s]
B = [m/s²]
Explanation:
Assuming that V has SI units of m/s, then A and BT must also have units of m/s.
A = [m/s]
BT = [m/s]
Since T has SI units of s:
B [s] = [m/s]
B = [m/s²]
On a 100km track , a train travels the first 30km with a speed of 30km/h . How fast the train travel the next 70 km if the average speed for the entire journey is 40km/h?
Answer:
v = 46.67 km/h
Explanation:
We will use the following formula throughout this numerical:
s = vt
where,
s = distance covered
v = speed
t = time taken
FOR FIRST 30 km:
s = 30 km
v = 30 km/h
t = t₃₀ = ?
Therefore,
30 km = (30 km/h)(t₃₀)
t₃₀ = (30 km)/(30 km/h)
t₃₀ = 1 h
FOR TOTAL 100 km:
s = 100 km
v = 40 km/h (Average Speed)
t = total time = ?
Therefore,
100 km = (40 km/h)(t)
t = (100 km)/(40 km/h)
t = 2.5 h
FOR LAST 70 km:
s = 70 km
t₇₀ = t - t₃₀ = 2.5 h - 1 h = 1.5 h
v = v₇₀ = ?
Therefore,
70 km = v(1.5 h)
v = 70 km/1.5 h
v = 46.67 km/h
explain relative velocity.
Answer:
The relative velocity of an object A with respect to another object B.
Explanation:
The relative velocity of an object A with respect to another object B is the velocity that object A would appear to have to an observer situated on object B moving along with it.
b. i. In a hydraulic press, a force of 200N is applied to master piston of area 25cm. If
the press is designed to produce a force of 5000N, determine the area of the slave
piston.
(4marks)
Answer:
625 cm²
Explanation:
The pressure is the same on both pistons.
F/A = F/A
200 N / 25 cm² = 5000 N / A
A = 625 cm²
The following passage has not been edited. There is an error in each line. Write the
incorrect word and the correction in your answer sheet against the correct question
number. The first one has been done as an example. ( 1 x 4 = 4 )
Community service sensitize people to Error: sensitize ; Correction: sensitizes
other‟s needs and supports inclusive (a) Error: _______ ; Correction: ______
development to the underprivileged (b) Error: _______ ; Correction: ______
sections with society. Courses about social (c) Error: ______ ; Correction: _______
work prepares frontline workers to (d) Error: _______ ; Correction: ______
Answer:
(a) Error: Other's ; Correction: Others'
(b) Error: to ; Correction: for
(c) Error: with ; Correction: of
(d) Error: prepares ; Correction: prepare
Explanation:
a) The error is in the word "other's" as the position of apostrophe is wrong, so the correct word will be "others'", it shows plural nouns.
b) The error is in the word "to", so the correct word will be "for" as for is use to talk about a purpose.
c) The error is in the word "with" and the correct word will be "of" as of indicates relationships between other words including things that made of other things.
d) The error is in the word "preapres" and the correct word will be "prepare".
If an oxygen molecule traveling at the rms speed bounces back and forth between opposite sides of a cubical vessel of 0.10 m on a side, what is the average force the molecule exerts on one of the walls of the container? Assume the molecule’s velocity is perpendicular to the walls it hits.
Answer:
1.25x10^-19N
Explanation:see attached file pls
A scientist is studying the effects of sunlight on rose bushes. Which of the
following is a testable question about this topic?
Answer:
Does more sunlight make rose bushes grow taller?
Explanation:
When conducting a research, the researcher usually poses research questions in order to confirm or disprove the research hypothesis. A research question addresses the key issues and questions that the research project is intended to answer. Good research questions always aim at improving the body of knowledge on the selected topic of the research. Research questions must be narrowed down to specific details of the topic. They must also be testable, they must not be vague.
If I am studying the effect of sunlight on rose bushes, then the question, 'does more sunlight make rose bushes grow taller?' Is apt to the research because it can be tested by exposing various thorn bush plants to varying degrees of sunlight and recording my observation.
Answer:
If rose bushes receive more hours of sunlight each day, they will grow taller.
Explanation:
I just answered it on Apex, and they like to switch up how they word things sometimes.
A ball is launched from the ground with a horizontal speed of 30 m/s and a vertical speed of 30 m/s. What far vertically will it travel before hiting the ground A. 40 m B. 30 m C. 60 m D. 50 m
Answer:
First, let's think in the vertical problem:
The acceleration will be the gravitational acceleration:
g = 9.8 m/s^2
a = -9.8 m/s^2
For the velocity, we integrate over time:
v(t) = (-9.8 m/s^2)*t + v0
Where v0 is the initial velocity, in this case v0 = 30m/s.
v(t) = (-9.8 m/s^2)*t + 30m/s
Now, for the position we integrate again over time, and get:
P(t) = (1/2)*(-9.8 m/s^2)*t^2 + 30m/s*t + p0
Where p0 is the initial position, as the ball is launched from the ground, we can use p0 = 0m
p(t) = (-4.9m/s^2)*t^2 + 30m/s*t
Now, the maximum vertical height is reached when:
v(t) = 0m/s = -9.8m/s^2*t + 30m/s
t = 30m/s/9.8m/s^2 = 3.06s
Now we can evaluate the vertical position in t = 3.06s
p(3.06s) = (-4.9m/s^2)*(3.06)^2 + 30m/s*3.06 = 62m
So, rounding down, the correct option is: C. 60 m
a bicycle has a momenum of 36kg•m/s and a velocity of 4m/s. what is the mass of the bicycle?
a) A conductor carrying a current I = 12.5 A is directed along the positive x axis and perpendicular to a uniform magnetic field. A magnetic force per unit length of 0.110 N/m acts on the conductor in the negative y direction. Determine the magnitude of the magnetic field in the region through which the current passes.
Answer:
8.8 mT
Explanation:
Current through the conductor = 12.5 A
Magnetic force per unit length on the wire = 0.110 N/m
Recall that the magnetic force per unit length on a current carrying conductor is in a uniform magnetic field is
[tex]\frac{F}{l}= IBsin\alpha[/tex]
where B is the magnetic field magnitude
[tex]I[/tex] is the current in the conductor
α is the angle the conductor makes with the magnetic field ( since it is perpendicular in this case, α is 90°)
imputing values into the equation, we'll have
0.11 = 12.5 x B x sin 90°
but sin 90° = 1, therefore, we have
0.11 = 12.5B
B = 0.11/12 = 8.8 x 10^-3 T
or rather = 8.8 mT
a 6 letter word a way of explaining an object or event using a set of facts
Explanation:
A theory is a way of explaining an object or event using a set of facts.
The angle of incidence of a ray of light striking an equilateral triangular prisms ABC of refracting angle 60o is 40o. Calculate:
(i)the angle of refraction at the first face
(ii)the angle of emergence
Answer:
1: the refracted angle in the first face is equal to the incident angle that is 60degrees
2. Emergence Angle is 42degrees
Explanation:
Pls see attached file
A piano has a mass of 99 kg. What is the weight of the piano?
A. 1030 N
B. 842 N
C. 1129 N
D. 970 N
Help!!
Answer:
[tex]D.\ 970\ N[/tex]
Explanation:
Given:
Mass of Piano: 99kg
Required:
Calculate its weight
The weight of an object is calculate as thus;
[tex]Weight = Mass\ (m) * Acceleration\ due\ to\ gravity\ (g)[/tex]
[tex]m = 99kg[/tex] and [tex]g = 9.8m/s^2[/tex]
The formula becomes
[tex]Weight = 99kg * 9.8m/s^2[/tex]
[tex]Weight = 970.2\ kgm/s^2[/tex]
[tex]Weight = 970.2\ N[/tex]
[tex]Weight = 970\ N[/tex] Approximated
Hence, the weight of the piano is 970N
on heating gases expand ______________ than solids and liquids
Answer:
On heating gases expands than solid and liquid because the molecules gets seperated and the volume increases that causes to expand.
Explanation:
Hope it is helpful
please mark me as brainliest
please
The graph shows a wave that oscillates with a frequency of 60 Hz. Based on the information given in the diagram, what is the speed of the wave?
Answer:
900 cm/s or 9 m/s.
Explanation:
Data obtained from the question include the following:
Length (L) = 30 cm
frequency (f) = 60 Hz
Velocity (v) =.?
Next, we shall determine the wavelength (λ).
This is illustrated below:
Since the wave have 4 node, the wavelength of the wave will be:
λ = 2L/4
Length (L) = 30 cm
wavelength (λ) =.?
λ = 2L/4
λ = 2×30/4
λ = 60/4
λ = 15 cm
Therefore, the wavelength (λ) is 15 cm
Now, we can obtain the speed of the wave as follow:
wavelength (λ) = 15 cm
frequency (f) = 60 Hz
Velocity (v) =.?
v = λf
v = 15 × 60
v = 900 cm/s
Thus, converting 900 cm/s to m/s
We have:
100 cm/s = 1 m/s
900 cm/s = 900/100 = 9 m/s
Therefore, the speed of the wave is 900 cm/s or 9 m/s.
When we double the distance between a source of light and the
surface on which it falls, the amount of illumination on the surface
decreases to
(what fraction) of the
original illumination.
The amount of lighting on a surface drops to (1/4) of the initial illumination when the distance between a light source and the surface it falls on is doubled.
What is illumination?The amount of light or luminous flux that falls on a surface is known as illumination. It is expressed as lux or lumens per square meter.
The square of the distance has an inverse relationship with the light intensity;
[tex]\rm I = \frac{1}{r^2}[/tex]
Where,
I is the light intensity
r is the distance
Let r is the distance and I is the sound intensity for case 2;
r' = 2r
[tex]\rm I' = \frac{1}{(2r)^2} \\\\ I' = \frac{1}{4r^2} \\\\ I' = \frac{I}{4}[/tex]
When we double the distance between a source of light and the surface on which it falls, the amount of illumination on the surface decreases to(1/2) of the original illumination.
Hence the value of the fraction is 1/4.
To learn more about the illumination refer;
https://brainly.com/question/20160684
#SPJ2