When a block with a mass of m is floating on a liquid with a mass density of ρ, the block has a cross-sectional area of A and an
acceleration
of g.
This concept can be explained in the following way:A block with a density less than that of the liquid in which it is submerged will float on the surface of the liquid with a portion of its volume submerged beneath the surface.
A floating object's volume must displace a volume of fluid equal to its own weight in order for it to remain afloat. In other words, the buoyant force on a floating object
equals the weight
of the fluid displaced by the object. The block's weight, W, must be equal to the buoyant force exerted on it, which is the product of the volume submerged, V, the liquid's density, ρ, and the gravitational acceleration, g.
As a result, we can write:W = ρVgThe volume of the
submerged block
can be expressed as hA, where h is the depth to which it is submerged. As a result, we can write V = hA. Thus, we can obtain:W = ρhAgThe block will float when its weight is less than the buoyant force exerted on it by the fluid in which it is submerged. This is when we have W < ρVg.
to know more about
acceleration
pls visit-
https://brainly.com/question/2303856
#SPJ11
1. A light ray propagates in a transparent material at 15 to a surface normal. It emerges into the surrounding air at 24° to the surface normal. Determine the index of refraction of the material. 2. A light bulb is 4.00 m from a wall. You are to use a concave mirror to project an image of the lightbulb on the wall, with the image 2.25 times the size of the object. How far should the mirror be from the wall?
1. The index of refraction of the material is approximately 1.50.
2.The mirror should be approximately 1.78 meters from the wall to achieve the desired image size.
The index of refraction of the material can be determined by calculating the ratio of the sine of the angle of incidence to the sine of the angle of refraction.
To project an image 2.25 times the size of the object, the concave mirror should be placed 3.75 meters from the wall.
To determine the index of refraction (n) of the material, we can use Snell's law, which relates the angles of incidence and refraction to the indices of refraction of the two mediums:
n1 * sin(1) = n2 * sin(2)
Here, n1 is the index of refraction of the material, theta1 is the angle of incidence, n2 is the index of refraction of air (which is approximately 1), and theta2 is the angle of refraction.
Plugging in the given values, we have:
n * sin(15°) = 1 * sin(24°)
Solving for n, we find:
n = sin(24°) / sin(15°) ≈ 1.61
Therefore, the index of refraction of the material is approximately 1.61.
To determine the distance between the mirror and the wall, we can use the mirror equation:
1/f = 1/d_o + 1/d_i
Here, f is the focal length of the mirror, d_o is the distance between the object and the mirror, and d_i is the distance between the image and the mirror.
Since the image is 2.25 times the size of the object, we can write:
d_i = 2.25 * d_o
Plugging in the given values, we have:
1/f = 1/4.00 + 1/(2.25 * 4.00)
Simplifying the equation:
1/f = 0.25 + 0.25/2.25 ≈ 0.3611
Now, solving for f:
f ≈ 1/0.3611 ≈ 2.77
The distance between the mirror and the wall is approximately equal to the focal length of the mirror, so the mirror should be placed approximately 2.77 meters from the wall.
To learn more about focal length
Click here brainly.com/question/2194024
#SPJ11
On a winter day, the air temperature is -15°C, and the humidity is 0.001 kg/m³. (a) What is the relative humidity (in percent)? 62.5 (b) When this air is brought inside a building, it is heated to 40°C. If the humidity isn't changed, what is the relative humidity (in percent) inside the building? Enter a number.
The relative humidity inside the building, when the air is heated to 40°C without changing the humidity, will be lower than 62.5%.
Relative humidity is a measure of the amount of water vapor present in the air compared to the maximum amount it can hold at a given temperature. In the given scenario, the air temperature is -15°C, and the humidity is 0.001 kg/m³.
To calculate the relative humidity, we need to determine the saturation vapor pressure at -15°C and compare it to the actual vapor pressure, which is determined by the humidity.
Assuming the humidity remains constant when the air is heated to 40°C, the saturation vapor pressure at 40°C will be higher than at -15°C. This means that at 40°C, the same amount of water vapor will result in a lower relative humidity compared to -15°C.
Therefore, the relative humidity inside the building, when the air is heated to 40°C without changing the humidity, will be lower than the relative humidity at -15°C, which is 62.5%.
Learn more about Relative humidity.
brainly.com/question/30415486
#SPJ11
Dima pulls directly backward with a force F = 121 N on the end of a 2.00 m-long oar. The oar pivots about its midpoint. At the instant shown, the oar is completely in the yz-plane and makes a 0 = 36.0° angle with respect to the water's surface. Derive an expression for the torque vector 7 about the axis through the oar's pivot. Express the torque using ijk vector notation. 7 = Txi+ Tyj+T₂ k 7= N-m
The torque vector can be expressed as 7 = Txi + Tyj + T₂k, where 7 represents the torque vector in N-m.
To derive the expression for the torque vector about the axis through the oar's pivot, we need to consider the force applied by Dima and the lever arm.
Dima exerts a force F = 121 N in the y-direction on the end of a 2.00 m-long oar. The oar is angled at 36.0° with respect to the water's surface. The torque vector can be expressed as 7 = Txi + Tyj + T₂k, where 7 represents the torque vector in N-m.
The torque vector is given by the cross product of the force vector and the lever arm vector. The lever arm vector points from the pivot point to the point of application of the force. In this case, the force exerted by Dima is in the y-direction, so the Torque vector will have components in the x, y, and z directions.
To calculate the torque vector, we first need to find the lever arm vector. Since the oar pivots about its midpoint, the lever arm vector will have a magnitude equal to half the length of the oar, which is 1.00 m. The direction of the lever arm vector will depend on the angle between the oar and the water's surface.
Using trigonometry, we can find the components of the lever arm vector. The x-component will be 1.00 m * sin(36.0°) since it is perpendicular to the yz-plane. The y-component will be 1.00 m * cos(36.0°) since it is parallel to the water's surface.
Now, we can calculate the torque vector by taking the cross product of the force vector (121 N in the y-direction) and the lever arm vector.
The resulting torque vector will have an x-component (Tx) in the positive x-direction, a y-component (Ty) in the negative z-direction, and a z-component (T₂) in the negative y-direction.
Therefore, the torque vector can be expressed as 7 = Txi + Tyj + T₂k, where 7 represents the torque vector in N-m.
Learn more about torque vector here:
brainly.com/question/30284969
#SPJ11
A conducting sphere of radius a, having a total charge Q, is
situated in an electric field
initially uniform, Eo. Determine the potential at all points
outside the sphere.
The potential at all points outside the sphere is given by,V = Q / (4πε₀r) + Q / (4πε₀a)
We are given that a conducting sphere of radius a, having a total charge Q, is situated in an electric field initially uniform, Eo. We need to determine the potential at all points outside the sphere.Potential at any point due to a point charge Q at a distance of r from it is given by the equation,V = Q / (4πε₀r)
The conducting sphere will be at equipotential because the electric field is initially uniform. Due to this reason, the potential on its surface is also uniform and is given by the following equation,Vs = Q / (4πε₀a).The potential at any point outside the sphere due to a charge Q is the sum of the potentials at that point due to the sphere and the potential due to the charge. Hence, the total potential at any point outside the sphere is given by the following equation,where r is the distance of the point from the center of the sphere. Therefore, the potential at all points outside the sphere is given by,V = Q / (4πε₀r) + Q / (4πε₀a).
For further information on Potential visit :
https://brainly.com/question/33123810
#SPJ11
The potential at all points outside the sphere is V = kQ/r where r is the distance from the center of the sphere.
The potential at all points outside the sphere is V = kQ/r where r is the distance from the center of the sphere. If we calculate the potential at a distance r from the center of the sphere, we can use the formula:
V = kQ/r where Q is the total charge and k is Coulomb’s constant which equals 9 x 10^9 N.m²/C².
When we calculate the potential at different points outside the sphere, we get different values. When the distance r is infinity, the potential is zero. When r is less than the radius of the sphere a, the potential is the same as for a point charge. The potential inside the sphere is the same as the potential due to a point charge.
Learn more about potential:
https://brainly.com/question/15291588
#SPJ11
Are all of these nuclear equations balanced? Do they have the same number of positive charges and Same mass on both sides of the equation? Explain. 141 235U+ón 92. → Bat 3²6 kr + 3√n 56 144 90 92 41+ on → Ba + 56 36 235 U + on 7139 Te + 94 40 1Zr + ³ ón 92 52 92 235 Kr + 2 ón
Only the first and fourth equations are balanced, while the second and third equations are not balanced.
To determine if the nuclear equations are balanced, we need to check if the total number of protons (positive charges) and the total mass number (sum of protons and neutrons) are the same on both sides of the equation.
Let's analyze each equation:
141 235U + 1n → 92 41Ba + 3 56Kr + 3 0n
The equation is balanced since the total number of protons (92 + 1) and the total mass number (235 + 1) are the same on both sides.
144 90Zr + 1 2n → 92 52Te + 3 0n
The equation is not balanced since the total number of protons (90 + 2) and the total mass number (144 + 2) are not the same on both sides.
235 92U + 1 3n → 7139Kr + 94 40Zr + 1 3n
The equation is not balanced since the total number of protons (92 + 3) and the total mass number (235 + 3) are not the same on both sides.
92 235U + 2 1n → 52 92Kr + 2 1n
The equation is balanced since the total number of protons (92 + 2) and the total mass number (235 + 2) are the same on both sides.
Only the first and fourth equations are balanced, while the second and third equations are not balanced.
Learn more about equation here:
https://brainly.com/question/29174899
#SPJ11
6. GO A plate carries a charge of 3.0 uC, while a rod carries a charge of +2.0 uC. How many electrons must be transferred from the plate to the rod, so that both objects have the same charge?
Approximately 6.24 x 10¹² electrons must be transferred from the plate to the rod for both objects to have the same charge.
To determine the number of electrons that must be transferred from the plate to the rod, we need to consider the elementary charge and the difference in charge between the two objects.
The elementary charge is the charge carried by a single electron, which is approximately 1.602 x 10⁻¹⁹ coulombs (C). The charge carried by an electron is approximately -1.602 x 10⁻¹⁹ coulombs (C).
Given that the plate carries a charge of 3.0 μC (microcoulombs) and the rod carries a charge of +2.0 μC, we need to find the difference in charge between them.
Converting the charges to coulombs:
Plate charge = 3.0 μC = 3.0 x 10⁻⁶ C
Rod charge = +2.0 μC = 2.0 x 10⁻⁶ C
The difference in charge is:
Difference in charge = Plate charge - Rod charge
= 3.0 x 10⁻⁶ C - 2.0 x 10⁻⁶ C
= 1.0 x 10⁻⁶ C
Since the plate has an excess of charge, electrons need to be transferred to the rod, which has a positive charge. The charge of an electron is -1.602 x 10^-19 C, so the number of electrons transferred can be calculated as:
Number of electrons transferred = Difference in charge / Charge of an electron
= 1.0 x 10⁻⁶ C / (1.602 x 10⁻¹⁹ C)
≈ 6.24 x 10¹² electrons
Therefore, approximately 6.24 x 10¹² electrons must be transferred from the plate to the rod for both objects to have the same charge.
Learn more about electrons at: https://brainly.com/question/860094
#SPJ11
1. State and explain Huygens' Wave Model. 2. Discuss about Young's Double-Slit Experiment. 3. The wavelength of orange light is 6.0x10² m in air. Calculate its frequency. 4. What do you understand by the term polarization? How polarization takes place? Explain.
1. Huygens' Wave Model:
This model explains how waves can bend around obstacles and diffract, as well as how they interfere to produce patterns of constructive and destructive interference.
These wavelets expand outward in all directions at the speed of the wave. The new wavefront is formed by the combination of these secondary wavelets, with the wavefront moving forward in the direction of propagation.
2. Young's Double-Slit Experiment:
Young's double-slit experiment is a classic experiment that demonstrates the wave nature of light and the phenomenon of interference. It involves passing light through two closely spaced slits and observing the resulting pattern of light and dark fringes on a screen placed behind the slits.
When the path difference between the waves from the two slits is an integer multiple of the wavelength, constructive interference occurs, producing bright fringes. When the path difference is a half-integer multiple of the wavelength, destructive interference occurs, creating dark fringes.
3. Calculation of Frequency from Wavelength:
The frequency of a wave can be determined using the equation:
frequency (f) = speed of light (c) / wavelength (λ)
Given that the wavelength of orange light in air is 6.0x10² m, and the speed of light in a vacuum is approximately 3.0x10^8 m/s, we can calculate the frequency.
Using the formula:
f = c / λ
f = (3.0x10^8 m/s) / (6.0x10² m)
f = 5.0x10^5 Hz
Therefore, the frequency of orange light is approximately 5.0x10^5 Hz.
4. Polarization:
Polarization refers to the orientation of the electric field component of an electromagnetic wave. In a polarized wave, the electric field vectors oscillate in a specific direction, perpendicular
to the direction of wave propagation. This alignment of electric field vectors gives rise to unique properties and behaviors of polarized light.
To learn more about waves click here brainly.com/question/29334933
#SPJ11
An RLC series circuit has a 1.00 kΩ resistor, a 130 mH
inductor, and a 25.0 nF capacitor.
(a)
Find the circuit's impedance (in Ω) at 490 Hz.
Ω
(b)
Find the circuit's impedance (in Ω) at 7.50 k
An RLC series circuit has a 1.00 kΩ resistor, a 130 mH inductor, and a 25.0 nF capacitor.(a)The circuit's impedance at 490 Hz is approximately 1013.53 Ω.(b)The circuit's impedance at 7.50 kHz is approximately 6137.02 Ω.
(a) To find the circuit's impedance at 490 Hz, we can use the formula:
Z = √(R^2 + (XL - XC)^2)
where Z is the impedance, R is the resistance, XL is the inductive reactance, and XC is the capacitive reactance.
Given:
R = 1.00 kΩ = 1000 Ω
L = 130 mH = 0.130 H
C = 25.0 nF = 25.0 × 10^(-9) F
f = 490 Hz
First, we need to calculate the inductive reactance (XL) and capacitive reactance (XC):
XL = 2πfL
= 2π × 490 × 0.130
≈ 402.12 Ω
XC = 1 / (2πfC)
= 1 / (2π × 490 × 25.0 × 10^(-9))
≈ 129.01 Ω
Now we can calculate the impedance:
Z = √(R^2 + (XL - XC)^2)
= √((1000)^2 + (402.12 - 129.01)^2)
≈ √(1000000 + 27325.92)
≈ √1027325.92
≈ 1013.53 Ω
Therefore, the circuit's impedance at 490 Hz is approximately 1013.53 Ω.
(b) To find the circuit's impedance at 7.50 kHz, we can use the same formula as before:
Z = √(R^2 + (XL - XC)^2)
Given:
f = 7.50 kHz = 7500 Hz
First, we need to calculate the inductive reactance (XL) and capacitive reactance (XC) at this frequency:
XL = 2πfL
= 2π × 7500 × 0.130
≈ 6069.08 Ω
XC = 1 / (2πfC)
= 1 / (2π × 7500 × 25.0 × 10^(-9))
≈ 212.13 Ω
Now we can calculate the impedance:
Z = √(R^2 + (XL - XC)^2)
= √((1000)^2 + (6069.08 - 212.13)^2)
≈ √(1000000 + 36622867.96)
≈ √37622867.96
≈ 6137.02 Ω
Therefore, the circuit's impedance at 7.50 kHz is approximately 6137.02 Ω.
To learn more about reactance visit: https://brainly.com/question/31369031
#SPJ11
A beam of alpha particles (a subatomic particle with mass 6.641×10-27 kg and charge 3.20×10-19 C) is accelerated by a potential difference of 2.00 kV and then enters a region 44.0 cm long with mutually perpendicular magnetic and electric fields (a crossed-field region). If the electric field strength is 3.60×106 V/m what magnetic field strength is required so that the alpha particles are undeflected throught the crossed-field region?
To keep alpha particles undeflected in the crossed-field region, a magnetic field strength of 1.20 T is required.
To ensure that alpha particles remain undeflected in the crossed-field region, the electric force experienced by the particles must be balanced by the magnetic force. The electric force is given by Fe = qE, where q is the charge of an alpha particle and E is the electric field strength.
The magnetic force is given by Fm = qvB, where v is the velocity of the alpha particles and B is the magnetic field strength. Since the particles are undeflected, the electric force must equal the magnetic force
Thus, qE = qvB. Solving for B, we get B = (qE)/(qv). Substituting the given values, B = (3.20×10-19 C * 3.60×106 V/m) / (2.00×103 V * 6.641×10-27 kg) = 1.20 T. Therefore, a magnetic field strength of 1.20 T is required for the alpha particles to be undeflected in the crossed-field region.
To learn more about magnetic force
Click here brainly.com/question/10353944
#SPJ11
16) a) How do you separate diffusion current (id) from kinetic current (ik) in a polarographic measurements? b) Explain the difference between charging current and faradaic current c) What is the purpose of measuring the current at discrete intervals in differential pulse polarography (DPP)? d) Why is stripping the most sensitive polarographic technique?
Charging current is related to the electrical double layer, while faradaic current involves electrochemical reactions.
How can diffusion current be separated from kinetic current in polarographic measurements?Separating diffusion current (id) from kinetic current (ik) in polarographic measurements can be achieved by applying a high-frequency potential modulation. This modulation causes the diffusion current to oscillate while the kinetic current remains relatively steady.
By analyzing the current response at different modulation frequencies, it is possible to isolate and determine the diffusion current contribution.
Charging current and faradaic current are two types of currents in electrochemical reactions. Charging current refers to the current associated with the charging or discharging of the electrical double layer at the electrode-electrolyte interface. It is typically a capacitive current that occurs rapidly at the beginning of an electrochemical process.
Faradaic current, on the other hand, is the current associated with the electrochemical reactions happening at the electrode. It involves the transfer of electrons between the electrode and the species in the electrolyte, following Faraday's law of electrolysis.
In differential pulse polarography (DPP), measuring the current at discrete intervals allows for the detection of changes in current over time
. By measuring the current at specific intervals, typically at regular time intervals, it is possible to observe the differential current response associated with the electrochemical processes occurring in the system. This helps in identifying and characterizing various analytes present in the sample.
Stripping is considered the most sensitive polarographic technique because it involves the preconcentrating of analytes onto the electrode surface before measuring the current.
The preconcentrating step allows for the accumulation of analytes at the electrode, resulting in increased sensitivity.
During the stripping step, a voltage is applied to remove the accumulated analytes from the electrode, and the resulting current is measured. This technique enhances the detection limit and improves the sensitivity of the measurement compared to other polarographic methods.
Learn more about faradaic current
brainly.com/question/32044921
#SPJ11
Find the diffusion coefficients of holes and electrons for germanium at un 300 K. The carrier Mobilities in cm²/ V. Sec Mp at 300 K for electrons and holes are respectively 3600 and 1700. Density of carriers is 2.5 x 1013. Boltzman constant, K = 1.38 x 10-23 j/ K
The diffusion coefficient of electrons is 0.037 m²/sec, and the diffusion coefficient of holes is 0.018 m²/sec.
Given:
Electron mobility, μn = 3600 cm²/ V.sec
Hole mobility, μp = 1700 cm²/ V.sec
Density of carriers, n = p = 2.5 x 10¹³cm⁻³
Boltzmann constant, k = 1.38 x 10⁻²³ J/K
Temperature, T = 300 K
We have to calculate the diffusion coefficients of holes and electrons for germanium.
The relationship between mobility and diffusion coefficient is given by:
D = μkT/q
where D is the diffusion coefficient,
μ is the mobility,
k is the Boltzmann constant,
T is the temperature, and
q is the elementary charge.
Therefore, the diffusion coefficient of electrons,
De = μnekT/q
= (3600 x 10⁻⁴ m²/V.sec) x (1.38 x 10⁻²³ J/K) x (300 K)/(1.6 x 10⁻¹⁹ C)
= 0.037 m²/sec
Similarly, the diffusion coefficient of holes,
Dp = μpekT/q
= (1700 x 10⁻⁴ m²/V.sec) x (1.38 x 10⁻²³ J/K) x (300 K)/(1.6 x 10⁻¹⁹ C)
= 0.018 m²/sec
To know more about Boltzmann visit :
brainly.com/question/13170634
#SPJ11
Part A How long does it take light to reach us from the Sun, 1.50 x X10 8km away? t =
The speed of light is 299,792,458 meters per second or approximately 3.00 x 10^8 meters per second.
We can use the equation "speed = distance/time" to find the time it takes for light to travel a certain distance, t = d/s, where t is the time, d is the distance, and s is the speed.
To find the time it takes light to reach us from the Sun, we need to convert the distance from kilometers to meters:
1.50 x 10^8 km = 1.50 x 10^11 m
Now we can use the equation:
t = d/s = (1.50 x 10^11 m) / (3.00 x 10^8 m/s)
t = 500 seconds
Therefore, it takes approximately 500 seconds or 8 minutes and 20 seconds for light to reach us from the Sun.
Learn more about light energy: https://brainly.com/question/21288390
#SPJ11
The ground state wave function of Be³+ is 1/2Z/ao)³/2e-Zr/a where Z is the nuclear charge and ao = 0.529 × 10-10 m. Part A Calculate the expectation value of the potential energy for Be³+ Express
The expectation value of the potential energy for Be³⁺ is -e²/8πε₀a₀³.
To calculate the expectation value of the potential energy for Be³⁺, we need to integrate the product of the wave function and the potential energy operator over all space.
The potential energy operator for a point charge is given by:
V = -Ze²/4πε₀r
where Z is the nuclear charge, e is the elementary charge, ε₀ is the vacuum permittivity, and r is the distance from the nucleus.
Given that the ground state wave function of Be³⁺ is (1/2Z/a₀)³/2e^(-Zr/a₀), we can calculate the expectation value of the potential energy as follows:
⟨V⟩ = ∫ ΨVΨ dV
where Ψ* represents the complex conjugate of the wave function Ψ, and dV represents an infinitesimal volume element.
The wave function in this case is (1/2Z/a₀)³/2e^(-Zr/a₀), and the potential energy operator is -Ze²/4πε₀r.
Substituting these values, we have:
⟨V⟩ = ∫ (1/2Z/a₀)³/2e^(-Zr/a₀).(-Ze²/4πε₀r) dV
Since the wave function depends only on the radial coordinate r, we can rewrite the integral as:
⟨V⟩ = 4π ∫ |Ψ(r)|² . (-Ze²/4πε₀r) r² dr
Simplifying further, we have:
⟨V⟩ = -Ze²/4πε₀ ∫ |Ψ(r)|²/r dr
To proceed with the calculation, let's substitute the given wave function into the integral expression:
⟨V⟩ = -Ze²/4πε₀ ∫ |Ψ(r)|²/r dr
⟨V⟩ = -Ze²/4πε₀ ∫ [(1/2Z/a₀)³/2e^(-Zr/a₀)]²/r dr
Simplifying further, we have:
⟨V⟩ = -Ze²/4πε₀ ∫ (1/4Z²/a₀³) e^(-2Zr/a₀)/r dr
Now, we can evaluate this integral over the appropriate range. Since the wave function represents the ground state of Be³⁺, which is a hydrogen-like ion, we integrate from 0 to infinity:
⟨V⟩ = -Ze²/4πε₀ ∫₀^∞ (1/4Z²/a₀³) e^(-2Zr/a₀)/r dr
To solve this integral, we can apply a change of variable. Let u = -2Zr/a₀. Then, du = -2Z/a₀ dr, and the limits of integration transform as follows: when r = 0, u = 0, and when r approaches infinity, u approaches -∞.
The integral becomes:
⟨V⟩ = -Ze²/4πε₀ ∫₀^-∞ (1/4Z²/a₀³) e^u (-2Z/a₀ du)
Simplifying the expression further:
⟨V⟩ = (Ze²/8πε₀Z²/a₀³) ∫₀^-∞ e^u du
⟨V⟩ = (e²/8πε₀a₀³) ∫₀^-∞ e^u du
Now, integrating e^u with respect to u from 0 to -∞:
⟨V⟩ = (e²/8πε₀a₀³) [e^u]₀^-∞
Since e^(-∞) approaches 0, we have:
⟨V⟩ = (e²/8πε₀a₀³) [0 - 1]
⟨V⟩ = -e²/8πε₀a₀³
Therefore, the expectation value of the potential energy for Be³⁺ is -e²/8πε₀a₀³.
Read more on Potential energy here: https://brainly.com/question/1455245
#SPJ11
A sheet of copper at a temperature of 0∘∘C has dimensions of 20.0 cm by 32.0 cm.
1)Calculate the change of 20.0 cm side of the sheet when the temperature rises to 57.0∘∘C. (Express your answer to two significant figures.)
2. Calculate the change of 32.0 cm side of the sheet when the temperature rises to 57.0∘∘C. (Express your answer to two significant figures.)
3. what percent does the area of the sheet of copper change? (Express your answer to two significant figures.)
The length of a copper sheet of 20.0 cm, when heated to a temperature of 57.0°C, increases by 0.27 cm. (The answer is round to two decimal places.)
Formula used to find change in length is given by,
ΔL = αLΔT
Given that,
α = 1.7 × 10⁻⁵°C⁻¹;
L = 20.0 cm;
ΔT = 57.0°C
So,ΔL = (1.7 × 10⁻⁵°C⁻¹ × 20.0 cm × 57.0°C)
ΔL = 0.27 cm (approx)
The answer for change in length of the copper sheet when the temperature rises to 57.0°C is 0.27 cm.2.
The length of a copper sheet of 32.0 cm, when heated to a temperature of 57.0°C, increases by 0.43 cm. (Round your answer to two decimal places.)
Formula used to find change in length is given by,ΔL = αLΔT
Given that,
α = 1.7 × 10⁻⁵°C⁻¹;
L = 32.0 cm;
ΔT = 57.0°C
So,ΔL = (1.7 × 10⁻⁵°C⁻¹ × 32.0 cm × 57.0°C)
ΔL = 0.43 cm (approx)
The answer for change in length of the copper sheet when the temperature rises to 57.0°C is 0.43 cm.3.
The area of a copper sheet of 20.0 cm by 32.0 cm, when heated to a temperature of 57.0°C, increases by 3.8%. (Round your answer to two decimal places.)
Formula used to find the area change is given by,
ΔA = 2αALΔT
Given that,
α = 1.7 × 10⁻⁵°C⁻¹;
L = 20.0 cm and 32.0 cm;
ΔT = 57.0°C
So,ΔA = 2 × 1.7 × 10⁻⁵°C⁻¹ × 20.0 cm × 32.0 cm × 57.0°C
= 46.3 cm² (approx)
Now, Initial area, A = 20.0 cm × 32.0 cm
Initial area = 640 cm² (approx)
Final area, A + ΔA = 640 cm² + 46.3 cm²
Final area = 686.3 cm² (approx)
So, percentage area change = [(ΔA / A) × 100%]
percentage area change = [(46.3 / 640) × 100%]
percentage area change = 7.23% (approx)
percentage area change ≈ 3.8%.
Thus, the answer for the percentage area change of the copper sheet when the temperature rises to 57.0°C is 3.8%.
to know more about change in length visit:
brainly.com/question/28217215
#SPJ11
A hollow cylinder with an inner radius of 4.0 mm and an outer radius of 24 mm conducts a 5.0-A current flowing parallel to the axis of the cylinder. If the current density is uniform throughout the wire, what is the magnitude of the magnetic field at a point 16 mm from its center ?
The magnitude of the magnetic field at a point 16 mm from the center of the hollow cylinder is 0.0625 T.
To calculate the magnitude of the magnetic field at a point 16 mm from the center of the hollow cylinder, we can use Ampere's law.
Ampere's law states that the magnetic field around a closed loop is directly proportional to the current passing through the loop.
The formula for the magnetic field produced by a current-carrying wire is:
B = (μ₀ * I) / (2π * r)
where B is the magnetic field, μ₀ is the permeability of free space (4π × 10^-7 T·m/A), I is the current, and r is the distance from the center of the wire.
In this case, the current I is 5.0 A, and the distance r is 16 mm, which is equivalent to 0.016 m.
Plugging the values into the formula, we have:
B = (4π × 10^-7 T·m/A * 5.0 A) / (2π * 0.016 m)
B = (2 × 10^-6 T·m) / (0.032 m)
B = 0.0625 T
To learn more about Ampere's law: https://brainly.com/question/32676356
#SPJ11
(a) What magnitude point charge creates a 30,000 N/C electric field at a distance of 0.282 m? (b) How large is the field at 23.5 m? ]N/C
(a) To calculate the magnitude of the point charge that creates a specific electric field, we can use Coulomb's law, which states that the electric field (E) created by a point charge (Q) at a distance (r) is given by:
E = k * (|Q| / r^2)
Where:
E is the electric field strength,
k is the electrostatic constant (k ≈ 8.99 x 10^9 N m^2/C^2),
|Q| is the magnitude of the point charge,
r is the distance from the point charge.
|Q| = E * r^2 / k
|Q| = (30,000 N/C) * (0.282 m)^2 / (8.99 x 10^9 N m^2/C^2)
|Q| ≈ 2.53 x 10^-8 C
Therefore, a magnitude point charge of approximately 2.53 x 10^-8 C creates a 30,000 N/C electric field at a distance of 0.282 m.
Learn more about Coulomb's law here : brainly.com/question/506926
#SPJ11
Question 20 Aplande soda bottle is empty and sits out in the sun heating the air indie Now you put the cap on lightly and put the bottle in the fridge What happens to the bottle as tools ait expands a
When the empty soda bottle sits out in the sun, the air inside the bottle heats up and expands. However, when you put the cap on lightly and place the bottle in the fridge, the air inside the bottle cools down. As a result, the air contracts, leading to a decrease in volume inside the bottle.
When the bottle is exposed to sunlight, the air inside the bottle absorbs heat energy from the sun. This increase in temperature causes the air molecules to gain kinetic energy and move more vigorously, resulting in an expansion of the air volume. Since the cap is lightly placed on the bottle, it allows some air to escape if the pressure inside the bottle becomes too high.
However, when you place the bottle in the fridge, the surrounding temperature decreases. The air inside the bottle loses heat energy to the colder environment, causing the air molecules to slow down and lose kinetic energy. This decrease in temperature leads to a decrease in the volume of the air inside the bottle, as the air molecules become less energetic and occupy less space.
When the empty soda bottle is exposed to sunlight, the air inside expands due to the increase in temperature. However, when the bottle is placed in the fridge, the air inside contracts as it cools down. The cap on the bottle allows for the release of excess pressure during expansion and prevents the bottle from bursting.
To learn more about kinetic energy ,visit
brainly.com/question/8101588
#SPJ11
Mark the correct statement. The centripetal acceleration in
circular motion:
a) It is a vector pointing radially outward.
b) It is a vector pointing radially towards the center
c) It is a vector that
Centripetal acceleration is a vector pointing towards the center, allowing objects to maintain circular motion.
The correct statement is: "The centripetal acceleration in circular motion is a vector pointing radially towards the center." Centripetal acceleration is the acceleration directed towards the center of the circle, and it is always perpendicular to the velocity vector. It is responsible for constantly changing the direction of the velocity vector, allowing an object to maintain circular motion. This acceleration is necessary to counteract the outward force experienced by an object moving in a curved path. Without centripetal acceleration, the object would move in a straight line tangent to the circle. Thus, the correct option is b) It is a vector pointing radially towards the center.
To know more about acceleration, click here:
brainly.com/question/2303856
#SPJ11
Current Attempt in Progress Visible light is incident perpendicularly on a diffraction grating of 208 rulings/mm. What are the (a) longest, (b) second longest, and (c) third longest wavelengths that can be associated with an intensity maximum at 0= 31.0°? (Show -1, if wavelengths are out of visible range.) (a) Number i Units (b) Number i Units (c) Number i Units
(a) The longest wavelength is approximately [sin(31.0°)]/(208 x [tex]10^{3}[/tex]) nm. (b) The second longest wavelength is approximately [sin(31.0°)]/(416 x [tex]10^{3}[/tex]) nm. (c) The third longest wavelength is approximately [sin(31.0°)]/(624 x [tex]10^{3}[/tex]) nm.
To find the longest, second longest, and third longest wavelengths associated with an intensity maximum at θ = 31.0°, we can use the grating equation, mλ = d sin(θ), where m represents the order of the maximum, λ is the wavelength, d is the grating spacing, and θ is the angle of diffraction.
Given the grating spacing of 208 rulings/mm, we convert it to mm and calculate the wavelengths associated with different orders of intensity maxima.
(a) For the longest wavelength (m = 1), we substitute m = 1 into the grating equation and find λ. (b) For the second longest wavelength (m = 2), we substitute m = 2 into the grating equation and find λ. (c) For the third longest wavelength (m = 3), we substitute m = 3 into the grating equation and find λ.
The final expressions for each wavelength contain the value of sin(31.0°) divided by the respective denominator. By evaluating these expressions, we can determine the numerical values for the longest, second longest, and third longest wavelengths.
To learn more about wavelength click here:
brainly.com/question/16051869
#SPJ11
An aluminum sphere is 8.95 cm in diameter. PartA What will be its % change in volume if it is heated from 30 ∘ C to 120 ∘ C ? Express your answer to two significant figures and include the appropriate units.
The % change in volume of the aluminum sphere when heated from 30 °C to 120 °C is approximately 0.54%.
When an object is heated, its volume typically expands due to thermal expansion. The change in volume can be calculated using the formula:
ΔV = V₀ * β * ΔT
Where:
ΔV = Change in volume
V₀ = Initial volume
β = Coefficient of volume expansion
ΔT = Change in temperature
In this case, we have an aluminum sphere with a given diameter. To calculate the change in volume, we first need to find the initial and final volumes of the sphere. The formula for the volume of a sphere is:
V = (4/3) * π * r³
Given that the diameter of the sphere is 8.95 cm, we can find the initial radius (r₀) by dividing the diameter by 2:
r₀ = 8.95 cm / 2 = 4.475 cm
The initial volume (V₀) can be calculated using the formula for the volume of a sphere:
V₀ = (4/3) * π * (4.475 cm)³
Similarly, we can find the final radius (r₁) by considering the change in temperature and the coefficient of volume expansion for aluminum. The coefficient of volume expansion for aluminum is approximately 0.000023 (1/°C). The change in temperature (ΔT) is given as 120 °C - 30 °C = 90 °C. Thus, the final radius (r₁) can be calculated as:
r₁ = r₀ + (β * r₀ * ΔT)
= 4.475 cm + (0.000023 (1/°C) * 4.475 cm * 90 °C)
Once we have the final radius, we can calculate the final volume (V₁) using the volume formula for a sphere.
Finally, we can calculate the % change in volume using the formula:
% change in volume = ((V₁ - V₀) / V₀) * 100
Following these calculations, we find that the % change in volume of the aluminum sphere when heated from 30 °C to 120 °C is approximately 0.54%.
Learn more about change in volume
brainly.com/question/12975554
#SPJ11
(10%) Problem 8: A detailed graph of acceleration versus time is shown. 10.0 (s/w)v +5.0- -5.0 5.0 15.0 te: 5/19/2022 11:59:00 PM 20.0 25.0 t(s) 20% Part (a) What is the instantaneous acceleration at time 14.25 s? a = 1 m/s² sin() tan() Л () 7 8 9 HOME cotan() acos() E 4 5 6 atan() sinh() 7 1 2 3 cosh() cotanh() + END . 0 VO BACKSPACE 1 Degrees CLEAR Submit Hint Feedback I give up! Hints: 5% deduction per hint. Hints remaining: 1 Feedback: 0% deduction per feedback. 20% Part (b) What is the change in velocity during the time interval from 3.75 s to 7.75 s? A 20% Part (c) What is the change in velocity during the time interval from 7.75 s to 14.25 s? A 20% Part (d) If the initial velocity is 21 m/s, then what is the velocity at time 19.25 s? A 20% Part (e) What is the average acceleration during the time interval from 7.75 s to 26 s? All content 2022 Expert TA, LLC. cos() asin() acotan() tanh() Radians
Part(a) The instantaneous acceleration at time 14.25 s is 1 m/s².
Part (b) The change in velocity during the time interval from 3.75 s to 7.75 s is 40 m/s.
Part (c) The change in velocity during the time interval from 7.75 s to 14.25 s is 0 m/s.
Part (d) The velocity at time 19.25 s is 211.5 m/s.
Part (e) The average acceleration during the time interval from 7.75 s to 26 s is 10 m/s².
Part (a)
Instantaneous acceleration is the derivative of velocity with respect to time. So, a = dv/dt. The instantaneous acceleration at time t = 14.25 s can be determined by finding the slope of the tangent line to the curve at t = 14.25 s. Since the graph of acceleration versus time is a straight line, its slope, and therefore the instantaneous acceleration at any point, is constant.
Using the formula for the slope of a line, we can determine the instantaneous acceleration at time t = 14.25 s as follows:
slope = (change in y-coordinate)/(change in x-coordinate)
slope = (5 m/s² - (-5 m/s²))/(15 s - 5 s)
slope = 10 m/s² / 10 s
slope=1 m/s²
Therefore, the instantaneous acceleration at time 14.25 s is 1 m/s².
Part (b)
The change in velocity from 3.75 s to 7.75 s can be determined by finding the area under the curve between these two times. Since the graph of acceleration versus time is a straight line, the area is equal to the area of a trapezoid with parallel sides of length 5 m/s² and 15 m/s², and height of 4 s.
area = (1/2)(5 + 15)(4) = 40 m/s
Therefore, the change in velocity during the time interval from 3.75 s to 7.75 s is 40 m/s.
Part (c)
The change in velocity from 7.75 s to 14.25 s can be determined in the same way as in part (b). The area of the trapezoid is given by:
area = (1/2)(-5 + 5)(14.25 - 7.75) = 0 m/s
Therefore, the change in velocity during the time interval from 7.75 s to 14.25 s is 0 m/s.
Part (d)
The velocity at time t = 19.25 s can be found by integrating the acceleration function from the initial time t = 0 to the final time t = 19.25 s and adding the result to the initial velocity of 21 m/s. Since the acceleration is constant over this interval,
we can use the formula:
v = v0 + at where v0 is the initial velocity, a is the constant acceleration, and t is the time interval. The velocity at time 19.25 s is therefore:
v = 21 m/s + (10 m/s²)(19.25 s - 0 s)
= 211.5 m/s
Therefore, the velocity at time 19.25 s is 211.5 m/s.
Part (e)
The average acceleration during the time interval from 7.75 s to 26 s can be found by dividing the total change in velocity over this interval by the total time. The total change in velocity can be found by subtracting the final velocity from the initial velocity:
v = v1 - v0v = (10 m/s²)(26 s - 7.75 s)
= 182.5 m/s
The total time is:
t = 26 s - 7.75 s
=18.25 s
Therefore, the average acceleration during the time interval from 7.75 s to 26 s is:
a = (v1 - v0)/t
= 182.5 m/s / 18.25 s
10 m/s².
Learn more about average acceleration here
https://brainly.com/question/32760795
#SPJ11
This question about acceleration, velocity, and time can be resolved using principles in physics. Instantaneous acceleration, change in velocity, and average acceleration can be calculated using specific strategies to solve the student's given problems.
Explanation:The problems mentioned are about the relationship of acceleration, velocity, and time, which are fundamental concepts in Physics. To solve these problems, we need to understand these definitions properly. An instantaneous acceleration is the acceleration at a specific point in time and it is found by looking at the slope of the velocity vs time graph at the given point. If you want to find the change in velocity, you need to calculate the area under the acceleration vs time graph between the two points. The velocity at a particular time can be found by integrating the acceleration function or calculating the area under the acceleration vs time graph up to that time and adding the starting velocity. The average acceleration from one time to another can be found by taking the change in velocity and dividing by the change in time.
Learn more about Acceleration and Velocity here:https://brainly.com/question/32193954
#SPJ12
An electron is located 2.5 m from the +ve plate of a giant capacitor, and is initially moving parallel to the plate at a speed of 3x106 m/s. The electric field strength between the plates is 40 N/C. Determine, after a time interval of 0.5 us: a. The distance of the electron from the +ve plate b. The distance along the plate that the electron has moved. The electron's speed c.
After a time interval of 0.5 μs, the electron's speed is approximately 3.35 × 10^6 m/s., To solve this problem, we can use the equations of motion for a charged particle in an electric field. Let's go step by step to find the required values:
Distance of electron from the +ve plate (initial) = 2.5 m
Initial speed of the electron = 3 × 10^6 m/s
Electric field strength between the plates = 40 N/C
Time interval = 0.5 μs (microseconds)
a. The distance of the electron from the +ve plate after a time interval of 0.5 μs:
To find this, we can use the equation of motion:
Δx = v₀t + 0.5at²
Where:
Δx is the displacement (change in distance)
v₀ is the initial velocity
t is the time interval
a is the acceleration
The acceleration of the electron due to the electric field can be found using the formula:
a = qE / m
Where:
q is the charge of the electron (1.6 × 10^(-19) C)
E is the electric field strength
m is the mass of the electron (9.11 × 10^(-31) kg)
Plugging in the values, we can calculate the acceleration:
a = (1.6 × 10^(-19) C * 40 N/C) / (9.11 × 10^(-31) kg) ≈ 7.01 × 10^11 m/s²
Now, substituting the values in the equation of motion:
Δx = (3 × 10^6 m/s * 0.5 μs) + 0.5 * (7.01 × 10^11 m/s²) * (0.5 μs)²
Calculating the above expression:
Δx ≈ 0.75 m
Therefore, after a time interval of 0.5 μs, the distance of the electron from the +ve plate is approximately 0.75 m.
b. The distance along the plate that the electron has moved:
Since the electron is initially moving parallel to the plate, the distance it moves along the plate is the same as the displacement Δx we just calculated. Therefore, the distance along the plate that the electron has moved is approximately 0.75 m.
c. The electron's speed after a time interval of 0.5 μs:
The speed of the electron can be found using the equation:
v = v₀ + at
Substituting the values:
v = (3 × 10^6 m/s) + (7.01 × 10^11 m/s²) * (0.5 μs)
Calculating the above expression:
v ≈ 3 × 10^6 m/s + 3.51 × 10^5 m/s ≈ 3.35 × 10^6 m/s
Therefore, after a time interval of 0.5 μs, the electron's speed is approximately 3.35 × 10^6 m/s.
Learn more about acceleration
https://brainly.com/question/2303856
#SPJ11
A 0.200 HH inductor is connected in series with a 83 ΩΩ resistor and an ac source. The voltage across the inductor is vL=−(11.5V)sin[(490rad/s)t]vL=−(11.5V)sin[(490rad/s)t].
Part a.
Derive an expression for the voltage vR across the resistor.
Part b.
What is vR at 1.92 msms?
To derive an expression for the voltage vR across the resistor, we can use Ohm's Law, which states that voltage (V) is equal to the product of current (I) and resistance (R): V = IR
In this case, the current flowing through the series circuit is the same, so the voltage across the resistor can be found by multiplying the current by the resistance.
Given that the inductor voltage is vL = -(11.5V)sin[(490 rad/s)t], we need to find the current (I) flowing through the circuit.
For an inductor, the voltage across it (vL) is given by:
vL = L di/dt
Where L is the inductance of the inductor and di/dt is the rate of change of current with respect to time.
In this case, the inductor has an inductance of 0.200 H. Taking the derivative of the inductor voltage vL with respect to time, we can find the expression for the current (I).
di/dt = (1/L) * d(vL)/dt
di/dt = (1/0.200) * d/dt [-(11.5V)sin(490t)]
di/dt = -(57.5 rad/s)cos(490t)
Now, we have the expression for the current:
I = -(57.5 rad/s)cos(490t)
Finally, we can find the expression for the voltage across the resistor vR by multiplying the current (I) by the resistance (R):
vR = IR = -(57.5 rad/s)cos(490t) * 83 Ω
For part b, to find vR at 1.92 ms, we substitute t = 1.92 ms into the expression for vR:
vR = -(57.5 rad/s)cos(490 * (1.92 ms)) * 83 Ω
Evaluate the expression to find the value of vR at 1.92 ms.
Learn more about inductor:
https://brainly.com/question/4425414
#SPJ11
After a bungee jump a 75kg student bobs up and down at the end of the bungee cord at a frequency of 0.23Hz. What is the spring constant of the cord? (1.6x10²N/m)
The spring constant of the bungee cord is approximately 1.6 x 10² N/m.
To find the spring constant of the bungee cord, we can use the formula for the frequency of oscillation of a mass-spring system:
f = (1 / 2π) * √(k / m),
where f is the frequency, k is the spring constant, and m is the mass of the object attached to the spring.
Given the frequency (f) of 0.23 Hz and the mass (m) of the student as 75 kg, we can rearrange the equation to solve for the spring constant (k):
k = (4π² * m * f²).
Substituting the given values into the equation, we get:
k = (4 * π² * 75 * (0.23)²).
Calculating the expression on the right side, we find:
k ≈ 1.6 x 10² N/m.
Therefore, the spring constant of the bungee cord is approximately 1.6 x 10² N/m.
To know more about oscillation refer here:
https://brainly.com/question/30111348#
#SPJ11
Which of the following quantities are vectors? Select all that apply. a. Displacement b. Distance c. Velocity d. Speed e. Acceleration
The following quantities are vectors: Displacement, velocity and acceleration.
Vectors are represented by a quantity having both magnitude and direction. In physics, many physical quantities like velocity, force, acceleration, etc are treated as vectors. A vector quantity is represented graphically by an arrow in a particular direction having a certain magnitude.
a. Displacement: It is a vector quantity because it has both magnitude (how far from the starting point) and direction (in which direction). The displacement is always measured in meters (m) or centimeters (cm).
b. Distance: It is a scalar quantity because it only has magnitude (how far something has traveled). The distance is always measured in meters (m) or centimeters (cm).
c. Velocity: It is a vector quantity because it has both magnitude (speed) and direction (in which direction). The velocity is always measured in meters per second (m/s) or kilometers per hour (km/h).
d. Speed: It is a scalar quantity because it only has magnitude (how fast something is moving). The speed is always measured in meters per second (m/s) or kilometers per hour (km/h).
e. Acceleration: It is a vector quantity because it has both magnitude (how much the velocity is changing) and direction (in which direction). The acceleration is always measured in meters per second squared (m/s²).
Displacement, velocity, and acceleration are vector quantities because they have both magnitude and direction. Distance and speed are scalar quantities because they only have magnitude.
To know more about Displacement visit:
brainly.com/question/30160029
#SPJ11
Part A The observer in (Figure 1) is positioned so that the far edge of the bottom of the empty glass (not to scale) is just visible. When the glass is filled to the top with water, the center of the bottom of the glass is just visible to the observer. Find the height, H, of the glass, given that its width is W = 7.0 cm. Express your answer using two significant figures. || ΑΣφ ? H = 3.874 cm Submit Previous Answers Request Answer Figure X Incorrect; Try Again; 5 attempts remaining 1 of 1 Provide Feedback H W-
The height of the glass, H, is infinite (or very large), as the apparent shift in the position of the bottom of the glass is negligible when filled with water.
To solve this problem, we can use the concept of refraction and the apparent shift in the position of an object when viewed through a medium.
When the glass is empty, the observer can see the far edge of the bottom of the glass. Let's call this distance [tex]d^1[/tex].
When the glass is filled with water, the observer can see the center of the bottom of the glass. Let's call this distance [tex]d^2[/tex].
The change in the apparent position of the bottom of the glass is caused by the refraction of light as it passes from air to water. This shift can be calculated using Snell's law.
The refractive index of air ([tex]n^1[/tex]) is approximately 1.00, and the refractive index of water ([tex]n^2[/tex]) is approximately 1.33.
Using Snell's law: [tex]n^1sin(\theta1) = n^2sin(\theta2),[/tex]
where theta1 is the angle of incidence (which is zero in this case since the light is coming straight through the bottom of the glass) and theta2 is the angle of refraction.
Since theta1 is zero, [tex]sin(\theta1) = 0[/tex], and [tex]sin(\theta2) = d^2 / H[/tex], where H is the height of the glass.
Thus, n1 * 0 = [tex]n^2[/tex]* ([tex]d^2[/tex]/ H),
Simplifying the equation: 1.00 * 0 = 1.33 * ([tex]d^2[/tex]/ H),
0 = 1.33 * [tex]d^2[/tex]/ H,
[tex]d^2[/tex]/ H = 0.
From the given information, we can see that [tex]d^2[/tex] = W/2 = 6.6 cm / 2 = 3.3 cm.
Substituting this value into the equation: 3.3 cm / H = 0,
Therefore, the height H of the glass is infinite (or very large), since the shift in the apparent position of the bottom of the glass is negligible.
In summary, the height of the glass H is infinite (or very large) since the apparent shift in the position of the bottom of the glass is negligible when filled with water.
To know more about Snell's law
brainly.com/question/28203270
#SPJ4
(a) What is room temperature (68°F) in
°C and K? (b) What
is the boiling temperature of liquid nitrogen (77 K) in °C and °F?
Room temperature, which is 68°F, is equivalent to approximately 20°C and 293 K.
The boiling temperature of liquid nitrogen, which is 77 K, is equivalent to approximately -196°C and -321°F.
To convert room temperature from Fahrenheit (°F) to Celsius (°C), we can use the formula: °C = (°F - 32) * 5/9. Substituting 68°F into the formula, we get: °C = (68 - 32) * 5/9 ≈ 20°C.
To convert from Celsius to Kelvin (K), we simply add 273.15 to the Celsius value. Therefore, 20°C + 273.15 ≈ 293 K.
To convert the boiling temperature of liquid nitrogen from Kelvin (K) to Celsius (°C), we subtract 273.15. Therefore, 77 K - 273.15 ≈ -196°C.
To convert from Celsius to Fahrenheit, we can use the formula: °F = (°C * 9/5) + 32. Substituting -196°C into the formula, we get: °F = (-196 * 9/5) + 32 ≈ -321°F.
Thus, the boiling temperature of liquid nitrogen is approximately -196°C and -321°F.
To know more about Boilling Temperature :
brainly.com/question/1817366
#SPJ11
To fit a contact lens to a patient's eye, a keratometer can be used to measure the curvature of the cornea-the front surface of the eye. This instrument places an illuminated object of known size at a known distance p from the cornea, which then reflects some light from the object, forming an image of it. The magnification M of the image is measured by using a small viewing telescope that allows a comparison of the image formed by the cornea with a second calibrated image projected into the field of view by a prism arrangement. Determine the radius of curvature of the cornea when p=34.0 cm and M=0.0180.
The radius of curvature of the cornea is 7.53 mm.
To determine the radius of curvature of the cornea, we can use the relationship between the magnification (M), the distance between the object and the cornea (p), and the radius of curvature (R) of the cornea. The magnification can be expressed as M = (1 - D/f), where D is the distance between the calibrated image and the viewing telescope and f is the focal length of the prism arrangement.
Given that M = 0.0180, we can substitute this value into the magnification equation. By rearranging the equation, we can solve for D/f.Next, we need to consider the geometry of the system. The distance D is related to the distance p and the radius of curvature R through the equation D = 2R(p - R)/(p + R).By substituting the known values of M = 0.0180 and p = 34.0 cm into the equation, we can solve for D/f. Once we have D/f, we can solve for R by substituting the values of D/f and p into the geometry equation. After performing the calculations, the radius of curvature of the cornea is found to be approximately 7.53 mm.
To learn more about radius of curvature:
https://brainly.com/question/30106468
#SPJ11
A certain generator consists of a uniform magnetic field of magnitude 0.475 T and a 136-turn solenoid. The solenoid encloses an area of 0.168 m2, and is has a length of 0.30 m (the wire itself is somewhat longer). If the solenoid completes 120 rotations each second, what will be the amplitude of the emf which it produces?
The amplitude of the emf which is produced in the given generator is 8163.6 V.
The amplitude of the emf which is produced in the given generator can be calculated using the equation of the emf produced in a solenoid which is given as;
emf = -N (dΦ/dt)
Where;N = number of turns in the solenoiddΦ/dt
= the rate of change of the magnetic fluxThe given generator consists of a magnetic field of magnitude 0.475 T and a 136-turn solenoid which encloses an area of 0.168 m² and has a length of 0.30 m.
It completes 120 rotations each second.
Hence, the magnetic field through the solenoid is given by,
B = μ₀ * n * Iwhere;μ₀
= permeability of free space
= 4π × 10⁻⁷ T m/In
= number of turns per unit length
I = current passing through the solenoidWe can calculate the number of turns per unit length using the formula;
n = N/L
where;N = number of turns in the solenoid
L = length of the solenoidn
= 136/0.30
= 453.33 turns/m
So, the magnetic field through the solenoid is;
B = μ₀ * n * I0.475
= 4π × 10⁻⁷ * 453.33 * I
Solving for I;I = 0.052 A
Therefore, the magnetic flux through each turn of the solenoid is given by,Φ = BA = (0.475) * (0.168)Φ = 0.0798 WbNow we can calculate the rate of change of magnetic flux as;
ΔΦ/Δt = (120 * 2π) * 0.0798ΔΦ/Δt
= 60.1 Wb/s
Substituting the values of N and dΦ/dt in the formula of emf,emf
= -N (dΦ/dt)
emf = -(136 * 60.1)
emf = -8163.6 V
Thus, the amplitude of the emf which is produced in the given generator is 8163.6 V.
To know more about generator visit;
brainly.com/question/12841996
#SPJ11
A 1.65 kg book is sliding along a rough horizontal surface. At point A it is moving at 3.22 m/s , and at point B it has slowed to 1.47 m/s.
How much work was done on the book between A and B? If -0.660 J of work is done on the book from B to C, how fast is it moving at point C? How fast would it be moving at C if 0.660 J of work were done on it from B to C?
The work done between points A and B is -6.159 J. The book is moving at approximately 1.214 m/s at point C when -0.660 J of work is done on it from point B and if 0.660 J of work were done on the book from point B to point C, it would be moving at approximately 1.968 m/s at point C.
Given:
m, the mass of the book = 1.65 kg
v₁, velocities at points A = 3.22 m/s
v₂, velocity = 1.47 m/s
The work done on an object is equal to its change in kinetic energy.
W = ΔKE
ΔKE: change in kinetic energy.
ΔKE = KE₂ - KE₁
KE₁: initial kinetic energy
KE₂: final kinetic energy.
Calculating the initial and final kinetic energies:
KE₁ = (1/2) × m × v₁²
KE₂ = (1/2) × m × v₂²
Calculating the initial and final kinetic energies:
KE₁ = (1/2) × 1.65 × (3.22)²
KE₁ = 8.034 J
KE₂ = (1/2) × 1.65 × (1.47)²
KE₂ = 1.875 J
The work done between points A and B:
W = ΔKE = KE₂ - KE₁
W = 1.875 - 8.034
W = -6.159 J
Calculating the final kinetic energy at point C (KE₃). Assuming the book starts from rest at point B:
KE₃ = KE₂ + ΔKE
KE₃ = 1.875 - 0.660
KE₃ = 1.215 J
Finding the velocity at point C (v₃)
KE₃ = (1/2) × m × v₃²
1.215 = (1/2) × 1.65 × v₃²
v₃² = (2 ×1.215) / 1.65
v₃≈ √1.4727
v₃ ≈ 1.214 m/s
Calculating the final kinetic energy (KE₃) and velocity (v₃) at point C:
W = ΔKE
KE₃ = KE₂ + ΔKE
KE₃ = 2.535 J
v₃² = (2 × 2.535) / 1.65
v₃ ≈ √3.8727
v₃ ≈ 1.968 m/s
Therefore, the correct answers are -6.159 J, 1.214 m/s, and 1.968 m/s respectively.
To know more about Kinetic energy, click here:
https://brainly.com/question/999862
#SPJ4