Therefore, the block is subjected to an average frictional force of -6 N from the rough section of the surface.
To solve this problem, we need to use the equation for average frictional force, which is: friction = (mass x change in velocity) / time. In this case, the mass of the block is 3 kg, the change in velocity is (3 m/s - 5 m/s) = -2 m/s (since the block is slowing down), and the time is 0.5 s. Plugging these values into the equation, we get:
friction = (3 kg x (-2 m/s)) / 0.5 s
friction = -6 N
Note that the negative sign indicates that the force of friction is acting in the opposite direction of the block's motion. Therefore, the magnitude of the average frictional force exerted on the block by the rough section of the surface is 6 N.
To know more about frictional force visit:
https://brainly.com/question/30280752
#SPJ11
each year, individuals die of carbon monoxide poisoning. which of the following is not true regarding carbon monoxide?
The statement "CO detectors are not necessary for homes, as CO can be easily detected by smell or taste." is not true regarding carbon monoxide.
Carbon monoxide (CO) is a colorless, odorless, and tasteless gas that is toxic to humans and animals. It is produced when fuels, such as coal, wood, gasoline, propane, and natural gas, do not burn completely.
When inhaled, CO binds to hemoglobin in red blood cells, reducing the amount of oxygen carried to the body's tissues and organs, including the brain and heart. This can lead to severe health effects or even death.
Here are some statements about carbon monoxide; one of them is not true:
1. CO detectors are not necessary in homes, as CO can be easily detected by smell or taste.
2. Prolonged exposure to low levels of CO can lead to chronic symptoms like headaches, dizziness, and nausea.
3. CO poisoning can be prevented by ensuring proper ventilation and maintaining fuel-burning appliances.
4. Symptoms of CO poisoning may resemble those of the flu, including headache, dizziness, weakness, nausea, vomiting, chest pain, and confusion.
The statement that is not true is the first one. It is crucial to install CO detectors in homes, as carbon monoxide is undetectable by human senses.
These detectors provide an early warning of CO presence, allowing people to take appropriate actions to ensure their safety. Remember to regularly test and replace CO detectors according to the manufacturer's instructions.
Learn more about carbon monoxide:
https://brainly.com/question/29233528
#SPJ11
A charge of 300.00 microC is sitting in space surrounded by a rectangular prism of size dd2d, where d is 10.00 cm. Assume that the prism is centered on the charge. What is the electric flux, phi, through the 3 visible sides of the rectangular prism?
The electric flux through the three visible sides of the rectangular prism is [tex]3.39 * 10^4 Nm^2/C.[/tex].
Charge = 300.00 micro C =[tex]3.00 * 10^{-7} C[/tex]
Prism dimensions = (2d) x (2d) x (2d)
d = 10cm
To find the electric flux through the 3 visible sides of the rectangular prism, we can use Gauss's Law. This law expresses that the electric flux through a sealed region is proportionate to the charge retained by the surface of the body.
The electric flux through this closed surface is calculated by:
phi = Q / epsilon_0
Q = [tex]3.00 * 10^{-7} C[/tex]
psilon_0 = [tex]8.85 * 10^{-12} C^2/Nm^2.[/tex]
The electric flux through the three visible sides of the rectangular prism is calculated as:
phi = [tex]3.00 * 10^{-7} C[/tex] / [tex]8.85 * 10^{-12} C^2/Nm^2.[/tex]
phi = [tex]3.39 * 10^4 Nm^2/C.[/tex]
Therefore we can conclude that the electric flux through the three visible sides of the rectangular prism is [tex]3.39 * 10^4 Nm^2/C.[/tex].
To learn more about Electric flux
https://brainly.com/question/30821342
#SPJ4
Doug hits a hockey puck, giving it an initial velocity of 6.0 m/s. If the coefficient of kinetic friction between ice and puck is 0.20, how far will the puck slide before stopping?A. 14 mB. 19 mC. 9 mD. 11 mE. 24 m
Answer:
KE = 1/2 M v^2 initial KE
Wf = μ M g S work done by friction in stopping puck
1/2 v^2 = μ g S
S = v^2 / (2 μ g) = 6^2 / (2 * .2 * 9.8) = 9.2 m
(C) is correct
The magnetic field at the center of a 0.70-cm-diameter loop is 3.0mT .Part A: What is the current in the loop?Part B: A long straight wire carries the same current you found in part a. At what distance from the wire is the magnetic field 3.0mT ?
(a). The current in the loop is approximately 16.6 A.
(b). The distance from the wire where the magnetic field is 3.0mT is approximately 0.0347 m, or 3.47 cm.
(a) To find the current in the 0.70-cm-diameter loop with a magnetic field of 3.0mT at the center, we can use the formula for the magnetic field at the center of a circular loop, which is given by:
B = (μ₀ * I) / (2 * R)
where B is the magnetic field, μ₀ is the permeability of free space (4π x 10^(-7) Tm/A), I is the current, and R is the radius of the loop.
First, convert the diameter of the loop to meters and find the radius:
Diameter = 0.70 cm = 0.007 m
Radius (R) = Diameter / 2 = 0.007 m / 2 = 0.0035 m
Now, rearrange the formula to solve for I:
I = (2 * B * R) / μ₀
Plug in the values:
I = (2 * 3.0 x 10^(-3) T * 0.0035 m) / (4π x 10^(-7) Tm/A)
I ≈ 16.6 A
So, the current in the loop is approximately 16.6 A.
(b) To find the distance from a long straight wire carrying the same current (16.6 A) at which the magnetic field is 3.0mT, we can use the formula for the magnetic field around a straight wire, which is given by:
B = (μ₀ * I) / (2π * d)
where B is the magnetic field, μ₀ is the permeability of free space (4π x 10^(-7) Tm/A), I is the current, and d is the distance from the wire.
Rearrange the formula to solve for d:
d = (μ₀ * I) / (2π * B)
Plug in the values:
d = (4π x 10^(-7) Tm/A * 16.6 A) / (2π * 3.0 x 10^(-3) T)
d ≈ 0.0347 m
So, the distance from the wire where the magnetic field is 3.0mT is approximately 0.0347 m, or 3.47 cm.
To Learn more about magnetic field :
https://brainly.com/question/11514007
#SPJ11
for a particular liquid-air interface the critical angle (for total internal reflection) is 54.6 degrees. the index of refraction of air is 1.00029. what is the index of refraction of the liquid?
The index of refraction of the liquid can be calculated using the formula: sin(critical angle) = (index of refraction of liquid) / (index of refraction of air). Therefore, the index of refraction of the liquid is 1.333. To find the index of refraction of the liquid, we can use Snell's Law and the concept of the critical angle.
Step 1: Recall Snell's Law
Snell's Law states that n1 * sin(θ1) = n2 * sin(θ2), where n1 and n2 are the indices of refraction, and θ1 and θ2 are the angles of incidence and refraction, respectively.
Step 2: Consider the critical angle
At the critical angle, θ1 = 54.6 degrees and θ2 = 90 degrees (because the refracted light travels along the liquid-air interface).
Step 3: Apply Snell's Law with the given values
We are given that the index of refraction of air (n2) is 1.00029. Using Snell's Law, we can write the equation as follows:
n1 * sin(54.6) = 1.00029 * sin(90)
Step 4: Solve for the index of refraction of the liquid (n1)
We can now solve for n1:
n1 = (1.00029 * sin(90)) / sin(54.6)
By calculating the values:
n1 ≈ 1.00029 * 1 / 0.80998
n1 ≈ 1.235
The index of refraction of the liquid is approximately 1.235.
To know more about Snell's Law click here:
brainly.com/question/1278278
#SPJ11
as you stand by the side of the road, a car approaches you at a constant speed, sounding its horn, and you hear a frequency of 76 hz. after the car goes by, you hear a frequency of 65 hz. what is the speed of the car? the speed of sound in the air is 343 m/s. group of answer choices 27 m/s 343 m/s 76 m/s 65 m/s
The speed of the car is approximately 27 m/s. This is the correct option.
This is an example of the Doppler effect, which describes the change in frequency of a wave due to the relative motion of the source and the observer.
The frequency of sound waves that an observer hears depends on the relative motion between the observer and the source of the sound waves.
If the source is moving toward the observer, the frequency of the sound waves will be higher than the emitted frequency.
If the source is moving away from the observer, the frequency of the sound waves will be lower than the emitted frequency.
In this case, the observer hears a frequency of 76 Hz when the car approaches, and a frequency of 65 Hz after the car passes by.
This means that the frequency of the sound waves emitted by the car changes as it moves relative to the observer.
The change in frequency of the sound waves is given by the following equation:
Δf/f = v/c
where Δf is the change in frequency, f is the emitted frequency, v is the velocity of the car, and c is the speed of sound.
Substituting the given values, we get:
(76 - 65)/76 = v/343
Solving for v, we get:
v = 27 m/s
to know more about Doppler effect refer here:
https://brainly.com/question/15318474#
#SPJ11
if you want a particular circuit to carry a large current, is it better to use a large-diameter or a small-diameter wire?
If you want a particular circuit to carry a large current, it is better to use a large-diameter wire. The reason for this lies in the relationship between the wire's diameter, resistance, and current-carrying capacity.
A wire's resistance is inversely proportional to its cross-sectional area, which increases with the diameter of the wire. A larger diameter wire has a lower resistance, allowing it to carry more current without significant power loss due to heat generation. This is because the electrons within the wire have more pathways to flow through, leading to a reduction in collisions and subsequent heat production.
In addition, a large-diameter wire has a higher current-carrying capacity, meaning it can safely conduct more current without reaching its maximum temperature or damaging its insulation. This is crucial in preventing circuit failures, overheating, or fire hazards in electrical systems.
In summary, using a large-diameter wire is beneficial when designing a circuit to carry large currents, as it reduces resistance and increases current-carrying capacity, ensuring efficient and safe operation.
Know more about Circuit here :
https://brainly.com/question/29639505
#SPJ11
A 20-N falling object encounters 4 N of air resistance. The magnitude of the net force on the object is
A 20-N falling object encounters 4 N of air resistance. The magnitude of the net force on the object is 16 N
When a 20-N falling object encounters 4 N of air resistance, the net force acting on the object can be calculated by subtracting the force of air resistance from the gravitational force. In this case, the gravitational force is 20 N, and the air resistance is 4 N.
To find the magnitude of the net force, simply subtract the air resistance from the gravitational force,
20 N - 4 N = 16 N.
Therefore, the magnitude of the net force on the falling object is 16 N. This net force represents the unbalanced force acting on the object, which determines its acceleration according to Newton's second law of motion (F = m * a). The 16 N net force causes the object to accelerate downwards but at a reduced rate due to the air resistance counteracting a portion of the gravitational force.
In summary, a 20-N falling object experiencing 4 N of air resistance has a net force of 16 N acting on it, which dictates the object's acceleration during its descent. This net force takes into account both gravitational force and air resistance and provides insight into the object's motion as it falls.
The Question was Incomplete, Find the full content below :
A 20-N falling object encounters 4 N of air resistance. The magnitude of the net force on the object is ___ N
Know more about Gravitational force here :
https://brainly.com/question/72250
#SPJ11
What is the mechanical advantage of a pulley system that can lift a 120 N load with an input force of 20 N
The mechanical advantage of a pulley system is calculated as the ratio of output force to input force. In this case, the output force is the weight of the load being lifted, which is 120 N, and the input force is the force applied to the pulley system, which is 20 N. Therefore, the mechanical advantage of the pulley system is:
Mechanical advantage = output force / input force
Mechanical advantage = 120 N / 20 N
Mechanical advantage = 6
Therefore, the mechanical advantage of the pulley system is 6. This means that for every 1 unit of force applied to the pulley system, the load is lifted with 6 units of force.
The sound of a toilet flush is approximately 80 decibels.1
(a) What is the decibel level of a sound that is three times as intense? Give a real-life example.
(b) How much less intense is a sound that is 60 dB? Give a real-life example.
A. A real-life example of a sound with a decibel level of approximately 84.77 dB would be a food blender.
B. This means that a 60 dB sound is 100 times less intense than an 80 dB sound.
(a) If a sound is three times as intense as the sound of a toilet flush (80 decibels), the decibel level can be calculated using the formula: dB2 = dB1 + 10 * log10(I2/I1). In this case, dB1 = 80, I1 = 1, and I2 = 3. Plugging these values into the formula, we get:
dB2 = 80 + 10 * log10(3/1) ≈ 84.77 decibels
A real-life example of a sound with a decibel level of approximately 84.77 dB would be a food blender.
(b) To determine how much less intense a 60 dB sound is compared to the 80 dB toilet flush, you can use the same formula and rearrange it to find the intensity ratio (I2/I1):
10 * log10(I2/I1) = dB2 - dB1
log10(I2/I1) = (60 - 80) / 10
I2/I1 = 10^(-2) = 0.01
This means that a 60 dB sound is 100 times less intense than an 80 dB sound. A real-life example of a sound with a decibel level of 60 dB would be normal conversation.
I hope this answers your question! Let me know if you need any further clarification.
To learn more about sound, refer below:
https://brainly.com/question/29707602
#SPJ11
Suppose that you exert 300 N horizontally on a 50-kg crate on a factory floor, where friction between the crate and the floor is 100 N. What is the acceleration of the crate?
The acceleration of the crate is 4 m/s²
To find the acceleration of the crate, we can use Newton's second law of motion,
Force (F) = mass (m) × acceleration (a).
In this case, we have an applied force of 300 N and a frictional force of 100 N acting against it.
The net force (F_net) will be the difference between the applied force and frictional force:
F_net = 300 N - 100 N = 200 N.
Now, we can use Newton's second law:
F_net = m × a
200 N = 50 kg × a
To solve for acceleration (a), divide both sides by the mass (50 kg):
a = 200 N / 50 kg
a = 4 m/s²
So, the acceleration of the crate is 4 m/s².
Know more about Newton's second law here :
https://brainly.com/question/25545050
#SPJ11
Water moves through a turbine in a dam, causing it to turn. The force of the water is 300 N, and the radius of the wheel is 20 m. What is the torque around the center of the wheel?A. 60 N-mB. 600 N-mC. 6,000 N-mD. 60,000 N-m
The formula for torque is T = F x r, where T is torque, F is force, and r is radius. Therefore, the answer is C. 6,000 N-m.
The torque around the center of the wheel can be calculated using the formula:
Torque = Force x Radius
where Force is the force applied to the wheel, and Radius is the distance from the center of the wheel to the point where the force is applied.
In this case, the force applied to the wheel is 300 N, and the radius of the wheel is 20 m. Therefore, the torque around the center of the wheel can be calculated as:
Torque = 300 N × 20 m = 6,000 N-m
So, the correct answer is C. 6,000 N-m.
To learn more about force visit;
https://brainly.com/question/13191643
#SPJ11
a person is standing in an elevator that is moving downward and slowing down. is the magnitude of the normal force on the person greater than, less than, or equal to the magnitude of the weight force on the person? a person is standing in an elevator that is moving downward and slowing down. is the magnitude of the normal force on the person greater than, less than, or equal to the magnitude of the weight force on the person? less than greater than equal to
When a person is standing in an elevator that is moving downward and slowing down, the magnitude of the normal force on the person is greater than the magnitude of the weight force on the person.
This is because the elevator is decelerating and the person's body is trying to continue moving at a constant velocity due to inertia. The normal force, which is the force exerted by the elevator floor on the person, is therefore greater to counteract this motion. As the elevator moves downward and slows down, it experiences an upward acceleration. According to Newton's Second Law, the net force acting on the person is equal to their mass multiplied by the acceleration (F = ma).
The net force on the person includes two forces: the normal force (Fn) exerted by the elevator floor, and the weight force (Fw) acting downward due to gravity. Since the elevator is accelerating upward, the normal force must be greater than the weight force to create a net upward force (Fn > Fw). Therefore, the magnitude of the normal force on the person is greater than the magnitude of the weight force on the person.
Learn more about Newton's Second Law here:
https://brainly.com/question/13447525
#SPJ11
a particle, mass 6 kg, moves along the y axis with a speed of 4.6 m/s. it experiences a force of 19 n directed along the x axis. what power is imparted to the particle by the force
To find the power imparted to the particle by the force, we can use the formula:
Power (P) = Force (F) × Velocity (v) × cos(θ)
where θ is the angle between the force and the velocity.
Given:
- Mass of the particle = 6 kg
- Speed along the y-axis = 4.6 m/s
- Force along the x-axis = 19 N
Since the force is along the x-axis and the particle is moving along the y-axis, the angle between the force and velocity is 90 degrees. The cosine of 90 degrees is 0.
Therefore,
P = 19 N × 4.6 m/s × cos(90°)
P = 19 N × 4.6 m/s × 0
P = 0 W
The power imparted to the particle by the force is 0 Watts.
To know more about Power :
https://brainly.com/question/16019780
#SPJ11
in a series- parallel circuit, is the total power equal to the product, sum, quotiemt, or difference of the individual resistor power values?
In a series-parallel circuit, the total power is equal to the sum of the individual resistor power values.
In a series-parallel circuit, the total power is equal to the sum of the individual resistor power values. To calculate the total power, follow these steps:
1. Determine the total resistance of the circuit by combining series and parallel resistances.
2. Calculate the total current using Ohm's Law (I = V/R), where V is the voltage and R is the total resistance.
3. Calculate the power across each resistor using the formula P = I^2 * R, where I is the current through the resistor and R is the resistor's resistance.
4. Sum up the power values for each resistor to find the total power in the circuit.
To know more about Ohm's Law:
https://brainly.com/question/1247379
#SPJ11
The _________ heat capacity of a substance is the amount of energy needed to increase the temperature of 1kg of the substance by 1°C.
Explanation:
The heat energy required to raise the temperature of a substance of mass 1 kg by 1 K is the specific heat capacity of that substance.
We divide the electromagnetic spectrum into six major categories of light, listed below. Rank these forms of light from left to right in order of increasing wavelength. To rank items as equivalent, overlap them. View Available Hint(s) Reset Help ultraviolet gamma rays radio waves visible light infrared X rays Shortest wavelength Longest wavelength Part B Rank the forms of light from left to right in order of increasing frequency. To rank items as equivalent, overlap them. ultravioletgamma raysradio wavesvisible lightinfrared X-ray
Part A:To rank the forms of light in order of increasing wavelength, arrange them as follows:1. Gamma rays;2. X rays;3. Ultraviolet;4. Visible light;5. Infrared;6. Radio waves
Shortest wavelength (left) to longest wavelength (right): Gamma rays < X rays < Ultraviolet < Visible light < Infrared < Radio waves
Part B:
To rank the forms of light in order of increasing frequency, arrange them in the opposite order of wavelength:1. Radio waves;;2. Infrared;3. Visible light;4. Ultraviolet;5. X rays;6. Gamma rays
Lowest frequency (left) to highest frequency (right): Radio waves < Infrared < Visible light < Ultraviolet < X rays < Gamma rays
learn more about wavelength Refer: https://brainly.com/question/28466888
#SPJ11
There is a long seesaw in the schoolyard James school. James likes to play on the seesaw with his friend Martin. The seats are in the schoolyard is long enough that I went James site is in the air, his feet RSI up as other children said. What forces James when he uses the seesaw 
The force that affects James when he uses the seesaw is force of gravity. Option C.
What is force of gravity about?Gravity may be a constrain that exists between any two objects within the universe that have mass. It is an appealing constrain, meaning it pulls objects towards each other. The size of the gravitational constrain depends on the mass of the objects and the separate between them. The bigger the masses of the objects and the closer they are to each other, the more grounded the gravitational drive between them.
Hence, gravity is the force that pulls James down towards the center of the Soil. This drive is dependable for keeping James situated on the teeter-totter and making him move up and down as he plays. The other alternatives, power, contact, and attractive drive, are not pertinent in this situation and don't play a part within the functioning of the teeter-totter.
Learn more about gravity from
https://brainly.com/question/14874038
#SPJ1
Explain why the acceleration of two freely-falling objects having different masses is the same. Is the force on each mass the same?
When two freely-falling objects with different masses are in free fall, their acceleration is the same due to gravity.
This occurs because gravity acts uniformly on all objects, regardless of their mass. In this context, the acceleration due to gravity is approximately 9.81 m/s² on Earth.
The relationship between mass, acceleration, and force can be explained using Newton's second law of motion, which states that the force (F) acting on an object is equal to its mass (m) multiplied by its acceleration (a):
F = m * a
Although the acceleration is the same for both objects, the force on each mass is not the same. Since the two objects have different masses, the force acting on each object will also be different, as per the equation above.
The object with the larger mass will experience a greater force due to gravity, while the object with the smaller mass will experience a lesser force.
In summary:
1. The acceleration of two freely-falling objects with different masses is the same because gravity acts uniformly on all objects.
2. The force on each mass is not the same, as it depends on the mass of the object according to Newton's second law of motion (F = m * a).
learn more about acceleration here: brainly.com/question/12550364
#SPJ11
If the time it takes the pillow to stop the ball is the same as the time of contact of the ball with the spring, how do the average forces on the ball compare?
The average forces on the ball during its contact with the spring and the pillow, we'll use the impulse-momentum theorem
Which states that the impulse (force × time) acting on an object is equal to its change in momentum (mass × velocity).
Given that the time of contact is the same for both the spring and the pillow, we can use the following equation to compare the average forces:
Average force = Impulse / Time
Let's denote the average force acting on the ball by the spring as F_spring and by the pillow as F_pillow.
Since the time of contact is the same for both cases (t_spring = t_pillow = t), we can write the equation for each scenario:
F_spring = Impulse_spring / t
F_pillow = Impulse_pillow / t
Now, we know that both the spring and the pillow stop the ball, so they have the same change in momentum (Δp). Therefore, we can rewrite the equations as:
F_spring = Δp / t
F_pillow = Δp / t
Since Δp and t are the same in both equations, we can conclude that the average forces on the ball (F_spring and F_pillow) are equal.
learn more about forces here: brainly.com/question/13191643
#SPJ11
As you drive down the road at 14 m/s, you press on the gas pedal and speed up with a uniform acceleration of 1.22 m/s^2 for 0.65 s. If the tires on your car have a radius of 33 cm, what is their angular displacement during this period of acceleration?
The angular displacement of the car tires during the 0.65-second acceleration period is 7.17 radians.
To find the angular displacement, follow these steps:
1. Calculate the final velocity: vf = vi + at, where vi = 14 m/s, a = 1.22 m/s², and t = 0.65 s.
2. Calculate the average velocity: v_avg = (vi + vf) / 2.
3. Find the linear displacement: d = v_avg * t.
4. Convert linear displacement to angular displacement: θ = d / r, where r = 0.33 m (converted from 33 cm).
so θ = 2.3661/0.33
=> 7.17 radians
By following these steps, we determine the angular displacement of the car tires during the period of acceleration.
To know more about angular displacement click on below link:
https://brainly.com/question/14769426#
#SPJ11
A generator (illustrated in the figure) is employed to be a back up in case of loss of power from the electric company. the loop is square (10 cm x 10 cm) and consists of n turns. the magnetic field is constant through the generating volume with magnitude b 0.2 t. the generator runs at a frequency f = 60 hz. how many turns n are required so that the output voltage has a peak value of vpk = 100?
To calculate the number of turns required for the generator to produce a peak output voltage of vpk = 100, we can use the formula:
vpk = 4.44 * n * b * f * A
Where:
- vpk = peak output voltage (in volts)
- n = number of turns
- b = magnetic field strength (in teslas)
- f = frequency (in hertz)
- A = area of the loop (in square meters)
First, we need to convert the dimensions of the loop from centimeters to meters:
- Length = 10 cm = 0.1 m
- Width = 10 cm = 0.1 m
- Area (A) = Length x Width = 0.1 m x 0.1 m = 0.01 m^2
We are given that the magnetic field strength (b) is constant and has a magnitude of 0.2 T, and the frequency (f) is 60 Hz. We are also given that the peak output voltage (vpk) is 100 V.
Substituting these values into the formula, we get:
100 = 4.44 * n * 0.2 * 60 * 0.01
Simplifying and solving for n, we get:
n = 375 turns
Therefore, the generator needs to have 375 turns in its square loop in order to produce a peak output voltage of 100 V when the electric company experiences a loss of power.
To know more about magnetic field :
https://brainly.com/question/31323435
#SPJ11
. the hydrogen balmer line hb has a wavelength of 486.1 nm. it is shifted to 563.9 nm in the spectrum of 3c 273. what is the redshift of this quasar?
The redshift of the quasar 3c 273 can be calculated using the formula (change in wavelength / original wavelength) = (redshift + 1).
In this case, the change in wavelength is 563.9 nm - 486.1 nm = 77.8 nm, and the original wavelength is 486.1 nm.
Plugging these values into the formula, we get:
(77.8 nm / 486.1 nm) = (redshift + 1)
Simplifying, we get:
redshift = (77.8 nm / 486.1 nm) - 1
redshift = 0.160
Therefore, the redshift of the quasar 3c 273 is approximately 0.160.
Hi! To calculate the redshift of the quasar 3C 273, we need to use the following formula:
Redshift (z) = (Observed Wavelength - Rest Wavelength) / Rest Wavelength
In this case, the rest wavelength corresponds to the hydrogen Balmer line Hβ at 486.1 nm, and the observed wavelength is 563.9 nm. Plugging in these values:
z = (563.9 nm - 486.1 nm) / 486.1 nm
z ≈ 0.16
The redshift of this quasar, 3C 273, is approximately 0.16.
To know more about wavelength click!
https://brainly.in/question/16073180
#SPJ11
0.160 is the redshift of this quasar if the hydrogen balmer line hb has a wavelength of 486.1 nm and it is shifted to 563.9 nm in the spectrum of 3c 273.
Define redshift
When the wavelength of electromagnetic radiation (like light) increases while the frequency and photon energy decreases, this phenomenon is known as a redshift. A negative redshift, also referred to as a blueshift, is a shift in which the wavelength decreases while the frequency and energy increase simultaneously.
The quasar 3c 273's redshift is calculated as follows: (wavelength change / initial wavelength) = (redshift + 1).
563.9 nm - 486.1 nm, or 77.8 nm h, is the difference in wavelength.The first wavelength is 486.1 nanometers.
We obtain: redshift = (77.8 nm / 486.1 nm)
Redshift = (77.8 nm / 486.1 nm). -1 i.e. 0.160
To learn more about wavelength :
https://brainly.com/question/10750459
#SPJ4
which pumper may be of smaller capacity due to its ability to use acquired energy of previous pumpers in the relay? select one: a. relay pumper b. primary pumper c. secondary pumper d. water supply pumper
The correct answer is a. relay pumper. A relay pumper may be of smaller capacity as it can use the acquired energy of previous pumpers in the relay, allowing for a more efficient water transfer over a longer distance.
Relay pumper is pumper or pumpers connected within relay that receives water from source. pumper or another relay pumper, boosts pressure, and supplies water to next relay pumper or. attack pumper.
Relay pumping is used where a source of water sufficient for the operation is a long distance from the operation or when an uninterruptable water supply for an operation is required. Relay pumping consists of a number of pumps spaced at intervals between a water source and the incident.
TO KNOW MORE ABOUT relay pumper CLICK THIS LINK -
brainly.com/question/31517667
#SPJ11
TRUE/FALSE. if two non-zero vectors a and b satisfy projb = 0 then a and b are parallel.
If two non-zero vectors a and b satisfy proj_ b(a) = 0, then a and b are parallel.
Step 1: Understand the projection of a onto b.
The projection of vector a onto vector b, denoted as proj _b(a), is a vector that represents the component of a that lies along the direction of b.
Step 2: Analyze the given condition.
We are given that proj_b(a) = 0. This means that the projection of vector a onto vector b is a zero vector, indicating there is no component of a along the direction of b.
Step 3: Determine the relationship between a and b.
Since there is no component of a along the direction of b, it implies that vector a is perpendicular to vector b. In other words, the angle between a and b is 90 degrees.
Step 4: Assess the parallel condition.
If a and b were parallel, the angle between them would be 0 degrees or 180 degrees. However, as we determined in Step 3, the angle between a and b is 90 degrees.
Conclusion: If two non-zero vectors a and b satisfy proj_b(a) = 0, then a and b are not parallel, but rather, they are perpendicular.
To know more about projection of vector:
https://brainly.com/question/30763487
#SPJ11
A truck traveled 400 meters north in 40 seconds, stopped at a red light for 30 seconds, and then it traveled 4.0 m/s north for 50 seconds. The magnitude of the average velocity of the truck was most nearlya. 1.2 m/sb. 3.4 m/sc. 4.6 m/sd. 6.6 m/s
The magnitude of the average velocity of the truck was most nearly b. 3.4 m/s
To find the average velocity of the truck, we need to calculate the total displacement of the truck and divide it by the total time taken.
The truck traveled 400 meters north in 40 seconds, which gives us an initial velocity of:
v1 = d1 / t1 = 400 m / 40 s = 10 m/s (north)
Then the truck stopped at a red light for 30 seconds, which means its velocity during this time was zero.
Finally, the truck traveled 4.0 m/s north for 50 seconds, which gives us a final velocity of:
v2 = d2 / t2 = 4.0 m/s (north)
To find the total displacement, we need to add the displacement during the first and second legs of the journey:
d = d1 + d2 = 400 m (north)
The total time taken is the sum of the time taken during each leg of the journey:
t = t1 + 30 s + t2 = 40 s + 30 s + 50 s = 120 s
Now we can find the average velocity:
vavg = d / t = 400 m (north) / 120 s = 3.33 m/s (north)
Therefore, the magnitude of the average velocity of the truck was nearly 3.4 m/s (option b).
Know more about Velocity here :
https://brainly.com/question/80295?source=archive
#SPJ11
if a wire of resistance r is stretched uniformly to 2.6 times its initial length, by what factor does the power dissipated in the wire change, assuming it remains hooked up to the same voltage source? assume the wire's volume and density remain constant. express your answer using two significant figures.
The power dissipated in the wire changes by a factor of 6.8.
When a wire of resistance r is stretched uniformly to 2.6 times its initial length, its cross-sectional area reduces.
Since the wire's volume and density remain constant, the new resistance (R') can be found using the formula R' = (2.6)²* r.
This is because resistance is directly proportional to length and inversely proportional to the cross-sectional area. So, R' = 6.76r (approximately).
Now, the power dissipated (P) in a resistor is given by P = V² / R, where V is the voltage. Since the voltage source remains the same, we can find the factor by which the power changes using the ratio of the new resistance to the original resistance:
Factor = (V² / R') / (V² / r) = r / R' = r / (6.76r) ≈ 1 / 6.8.
Thus, the power dissipated in the wire changes by a factor of 6.8.
To know more about voltage source click on below link:
https://brainly.com/question/30192746#
#SPJ11
99. Suppose that the system were placed in an elevator that accelerates downward at 2 m/s2. What would the scale read?A) 6 NB) 8 NC) 0 ND) 4 NE) 2 N
The scale would read less than the object's actual weight, specifically E)2 N less.
The scale reading is determined by the normal force acting on the object, which is equal in magnitude to the object's weight in the absence of any other forces. In this case, the elevator is accelerating downward, which means there is a net force acting on the object in the same direction as its weight.
Therefore, the normal force exerted by the scale must be less than the object's weight to balance out the net force and keep the object at rest relative to the elevator. The magnitude of the net force is given by the equation F_net = ma, where m is the mass of the object and a is the acceleration of the elevator.
In this case, F_net = m(-2 m/s^2) = -2m, which means the normal force exerted by the scale must be N = mg - 2m, where g is the acceleration due to gravity.
Since g = 9.8 m/s^2 and the mass of the object is not given, the exact value of the scale reading cannot be determined. However, it is clear that the scale reading will be less than the object's weight by 2 N(e).
For more questions like Force click the link below:
https://brainly.com/question/13191643
#SPJ11
What is the kinetic energy needed to overcome the coulomb repulsion between the two nuclei? To what temperature must the gas be heated to initiate the reaction?
The kinetic energy needed to overcome the coulomb repulsion between the two nuclei is 3.85 x 10⁻¹³ J and the gas is to be heated to a temperature of 5.57 x 10¹⁰ K initiate the reaction.
The deuterium-tritium fusion reaction is,
D + T → He + n + 17.59 MeV
where D is deuterium, T is tritium, He is helium, n is a neutron, and 17.59 MeV is the energy released in the reaction.
E = (kq₁q₂)/r, Coulomb's constant (8.987 x 10⁹ Nm²/C²) is k, the charges of the two nuclei (which are both positive, since they are protons) are q₁ and q₂, distance between the nuclei is r. Plugging these values into the formula, we get,
E = (8.987 x 10⁹ Nm²/C²)(1C)(1C)/(2.3 x 10⁻¹⁵m)
E = 3.85 x 10⁻¹³ J
The exact temperature needed to achieve this depends on the distribution of kinetic energies in the gas, but we can use the formula,
T = (2*E)/k_B
where T is the temperature in Kelvin, E is the energy needed to initiate the reaction, and k_B is the Boltzmann constant (1.38 x 10⁻²³ J/K). Plugging in the value of E that we calculated, we get,
T = (2*3.85 x 10⁻¹³ J) / (1.38 x 10⁻²³ J/K)
T = 5.57 x 10¹⁰ K
This temperature is extremely high and is not achievable in most laboratory conditions. However, in the core of the sun and other stars, temperatures and pressures are high enough to sustain nuclear fusion reactions.
To know more about coulomb repulsion, visit,
https://brainly.com/question/9261306
#SPJ4
the image of a real object formed by a converging lens group of answer choices is always real is always virtual can be real or virtual
The image of a real object formed by a converging lens can be either real or virtual. It depends on the position of the object relative to the lens and the distance between the object and the lens. If the object is placed beyond the focal point of the lens, the image will be real and inverted.
If the object is placed between the lens and its focal point, the image will be virtual and upright. The nature of the image formed by a converging lens is determined by the principles of optics and the properties of the lens itself.When a real object interacts with a converging lens, the image formed can be real or virtual, depending on the object's position relative to the lens's focal point. Here's a step-by-step explanation:
1. When the object is placed beyond the focal point of the converging lens, the image formed is real, inverted, and can be projected on a screen.
2. When the object is placed between the focal point and the lens, the image formed is virtual, upright, and cannot be projected on a screen.a
So, the image of a real object formed by a converging lens can be real or virtual, depending on the object's position relative to the lens's focal point.
learn more about lenses here
https://brainly.com/question/12530595
#SPJ11