Help me with this please
Answer:
–253.5 °C
Explanation:
We'll begin by calculating the number of mole in 6 g of CO₂. This can be obtained as follow:
Molar mass of CO₂ = 12 + (2×16)
= 12 + 32
= 44 g/mol
Mass of CO₂ = 6 g
Mole of CO₂ =.?
Mole = mass / molar mass
Mole of CO₂ = 6 / 44
Mole of CO₂ = 0.136 mole
Next, we shall convert 225 mL to L.
1000 mL = 1 L
Therefore,
225 mL = 225 mL × 1 L / 1000
225 mL = 0.225 L
Next, we shall determine the temperature of the gas. This can be obtained as follow:
Pressure (P) = 0.855 atm
Volume (V) = 0.225 L
Number of mole (n) = 0.136 mole
Gas constant (R) = 0.0821 atm.L/Kmol
Temperature (T) =?
PV =nRT
0.855 × 0.255 = 0.136 × 0.0821 × T
0.218025 = 0.0111656 × T
Divide both side by 0.0111656
T = 0.218025 / 0.0111656
T = 19.5 K
Finally, we shall convert 19.5 K to degree celsius (°C). This can be obtained as follow:
T(°C) = T(K) – 273
T(K) = 19.5 K
T(°C) = 19.5 – 273
T(°C) = –253.5 °C
Therefore, the temperature of the gas is –253.5 °C
Identify the gas law that applies to the following scenario: If a gas in a closed container is pressurized from 18.0 atm to 14.0 atm and its original
temperature was 35.0°C, what would the final temperature of the gas be?
Charles' Law
O Avogadro's Law
O Boyle's Law
O Gay-Lussac's Law
Answer:
Gay-Lussac's Law
Explanation:
The pressure is directly proportional to the absolute temperature under constant volume. This states the Gay-Lussac's law. The equation is:
P1T2 = P2T1
Where P is pressure and T absolute temperature of 1, initial state and 2, final state of the gas.
That means the right option is:
- Gay-Lussac's Law
please help me with question A and B pleaseeeeee
Answer:
♀️?sorryyyyyyyyyyyyy
The atomic model that describes an atom as a spherical object containing a certain number of electrons trapped in a mass of positive charge is often called the ___________ model.
help
Wing practice problems:
1. How many grams of water could freeze at 0°C when 525 KJ of energy is released?
Answer:
g x 334 J/g = 3340J or 3.34kJ.
Explanation:
The energy required for one gram of a solid to melt without experiencing any temperature change is known as the heat of fusion. 3.34 KJ of energy is released.
What is heat of fusion ?The most typical illustration is when solid transforms into liquid water. The molecules within the substance become less structured as a result of this process, which is also known as melting or heat of fusion.
The change in enthalpy ( H ) that occurs when a substance transforms from a solid to a liquid state.
The amount of energy required for one gram of a liquid to evaporate (boil) without a change in pressure is known as the heat of vaporization.
Q = gram × 334 J / g
= 3.34 KJ
Thus, at 0°C when 525 KJ of energy released is 3.34 KJ.
To learn more about heat of fusion follow the link below;
https://brainly.com/question/14053504
#SPJ2
In which period is an element that has the electron configuration 152 252
2p6 352 3p6 3d10 452 4p1 ? *
Period 4
Period 1
Period 2
Period 3
Answer:
Period 4
Explanation:
Given the electronic configuration of the element;
= Is² 2s² 2p⁶ 3s² 3p⁶ 3d¹⁰ 4s² 4p¹
The period of the element is determined by the highest coefficient in the electronic configuration.
For this given configuration (Is² 2s² 2p⁶ 3s² 3p⁶ 3d¹⁰ 4s² 4p¹), "4" is the highest coefficient and the element will certainly belong to period 4 in the periodic table.
To test if the prediction is correct:
Total number of electrons in the given element = 2+2+6+2+6+10+2+1 = 31
The element with atomic number of 31 = Gallium (Ga). (This element belong to period 4).
What equation is used to calculate atomic mass?
WARNING!!!! NO LINKS OR YOU WILL BE REPORTED!!!!
Answer:
Average atomic mass = f1M1 + f2M2 +… + fnMn where f is the fraction representing the natural abundance of the isotope and M is the mass number (weight) of the isotope. The average atomic mass of an element can be found on the periodic table, typically under the elemental symbol.
different between:Electrovalent bond and covalent bond
Explanation:
electrovalent bond covers single bond.
Covalent bond covers double or more bonds.
Help please :<
I just need the answer for this as quickly as possible.
Answer:
I think its the 3th one
Explanation:
The following graph shows a decay chain. Which part of the decay will take the most time? the decay of U-238 to Th-234, the decay of Th-234 to Ra-226, the decay of Ra-226 to Po-214, the decay of Po-214 to Pb-206
A- the decay of U-238 to Th-234
right on edge 2021
Answer:
A) the decay of U-238 to Th-234
:)
Explanation:
Is oil a reasonable energy source? Why or why not?
Answer:
No, it is not.
Explanation:
Oil is a non-renewable source of energy. ... Burning oil can pollute the air. Much of our oil has to be imported and it is becoming more and more expensive as reserves reduce and imports increase. Producing electricity from crude oil is expensive compared to other fossil fuels such as coal or gas.
*You Can put this in your own words
Explain how the digestive/excretory system is similar to a recycling center
Answer:
The digestive system is a system where our body breaks down food to acquire important nutrients. This is the same as your local recycling center because they collect and breaks the plastic down to be reused into recycled products.
The excretory system is a system where we remove excess unnecessary materials. This can be the same as the recycling center because they remove unnecessary materials (such as trash that is not meant to be recycled).
How many grams of aluminum to complete the reactions below?
Extra Content
6HCl(aq) + 2Al(s) → 2AlCl3(s) + 3H2(g)
six moles of hydrochloric acid reacts with two moles of aluminum to produce 2 moles of aluminum chloride plus 3 moles of hydrogen gas.
A.
26.9 grams
B.
55 grams
C.
53.96 grams
D.
2 grams
The answer is option C
Explanation:
Al= 26.982
2 moles of aluminium wad given so
2× 26.982= 53.96 grams
. What is the molarity of 5.30 moles of NaCl dissolved in 0.400 L of solution?
Answer:
13.25 M
Explanation:
Molarity is moles over liters so simply plug your values in as such:
5.30 mol ÷ 0.400 L = 13.25 M
Which contains more carbon 4.71 g of C6H12O6 or 5.85 g C2H6O?
Answer:
5.85 g C2H6O has more carbon
Explanation:
Weight of carbon in 4.71 g of C6H12O6
[tex]4.71 * 12.01\\56.5671\\[/tex] grams
Weight of carbon in 5.85 g of C2H6O
[tex]5.85 * 12.01\\70.259\\[/tex] grams
Hence, 5.85 g C2H6O has more carbon
One is a negative environmental consequence of surface mining?
Answer:
Surface mining (also known as "strip mining") has the potential to significantly erode soil fertility, pollute waters, deplete underground water sources, scar or altar the landscape, damage roads, houses, and other buildings, and kill wildlife.
9. The verb corrode means 'wear away gradually, usually by a chemical reaction." A metal
that is prized for its "resistance to corrosion" has what property?
A metal that is prized for its resistance to corrosion has what property?
Answer:
The metal has a high resistance to corrosion, meaning it is more durable and will nor rust easily.
Explanation:
The verb "corrode" means the condition of being damaged easily. In other words, it means that the metal or item gets worn out easily and is not long-lasting.
So, when metal is prized for its resistance against corrosion, it means that the metal is strong and does not wear out easily. It can outstand and withheld the corrosion effect longer. This means that the metal is durable and will not corrode easily.
2.5 liters of gas is stored at a pressure of 100 atm, if the volume were increased to 4 liters, what would be the new pressure?
a. 250 atm
b. 1000 atm
c. 62.5 atm
d. 160 atm
Answer:
62. 5
Explanation:
Use P1V1=P2V2
100 × 2.5 =250 /4=62.5
Is silicon(IV) oxide the same as silicon dioxide
Answer:
Yes, it is
Explanation:
Silicon (IV) oxide, commonly known as silica is a substance that majorly constitutes SAND. It has the chemical formula, SiO2, which contains a combination of silicon and oxygen.
The IUPAC name of SiO2 is Silicon IV oxide, which can also be referred to as Silicon dioxide because the structure the compound contains two (-di) oxygen atoms. Hence, based on the question, silicon(IV) oxide is the same as silicon dioxide.
What is the volume of 16.0 g of SO2 (g) at STP?
Answer:
Explanation:
At STP 1 mole of an ideal gas = 22.4 L.
Assuming SO2 (sulfur dioxide) acts as an ideal as, we have 16 g SO2 x 1 mol/64 g = 0.25 moles SO2
0.25 moles x 22.4 L/mole = 5.6 liters
unknown substance's mass: 75.0g, unknown substances molar mass = 150.0 g/mol, Hfus = 5.0x10^3 J/mol, Hvap = 1.00 x 10^4 J/mol, unknown substance's specific heat (liquid) = 2.2 J/g, unknown substance's specific heat (gas) = 4.8 J/g, unknown substances's specific heat (solid) = 5.0 J/g; Calculate the amount of heat (in J) for the unkown sample as it is heated at a constant rate from 10.0c to 25.0c as it passes through each of the following regions: region uv
Answer:
kkajqjjqjqjnqnqnqjqjq
When the medium is uniform, how do light waves travel through it? vibrating motion circular motion irregular motion straight line motion
Answer:
straight line
Explanation:
Answer:
All K12 ppl say yeye
Explanation:
I am researching something and I need your (Brainly's) opinion
Based on your opinion, Do you think social media is bad? you don't have to but tell me why
Answer:
I think it could be bad for some people because children could be exposed to toxic content. Without parent restrictions there could be some serious harm. Another reason, is that being on social media could distract kids from homework, chores, etc. (There is also scams and fake advertising)
I personally deleted a lot of my social media acc’s last year cause of me getting stressed and sad over it, but for now I’m pretty good I’m making friends off it having lots of fun
R is the ideal gas constant. We know it is equal to 0.0821. What is the unit for R?
L•atm/mol K
L•atm/mol · °C
mL • atm/mol. K
L• kPa/mol - K
Answer:
A. L•atm/mol K
Explanation:
The ideal gas law equation is given as follows:
PV = nRT
Where;
P = pressure (atm)
V = volume (L)
n = number of moles (mol)
R = gas law constant
T = temperature (K)
As rightly stated in this question, R is the ideal gas constant, which can be different depending on the unit of the other components.
At STP;
V = 22.4L
P = 1 atm
T = 273 K
n = 1 mole
Hence, using PV = nRT
R = PV/nT
R = 1 × 22.4/1 × 273
R = 22.4/273
R = 0.08205
Approximately, R = 0.0821
With the units of P as atm, V as L, n as mol and T as K; R will be 0.0821 L•atm/mol K
In balancing a chemical equation, which of the following are you allowed to do?
A) change coeffecients
B) change superscripts
C) change subscripts
D) add new substances
Answer:
Change Coefficients
Thank you
Under similar conditions, which gas diffuses most rapidly through a small
opening?
a. Methane, CH4
b. Carbon dioxide
C. Sulfur dioxide
d. Oxygen
e. Chlorine
Answer:
e
Explanation:
a
Conclusion:
sports
Un químico desea identificar una sustancia de naturaleza desconocida. Para ello, vierte en una probeta 45 mL de la sustancia; luego mide la masa en una balanza y obtiene un valor de 38,5 g. Según los valores indicados en la tabla, ¿a cuál sustancia debiera corresponder?
Answer:
La respuesta está en la explicación
Explanation:
Al realizar este análisis, el químico estará obteniendo la masa que la sustancia desconocida ocupa en un volumen determinado, a esto se le conoce como La Densidad de la Sustancia.
La densidad se puede definir como la masa (En gramos) que pesa una sustancia que ocupa 1mL. Así, la densidad de esta sustancia será:
38.5g / 45mL =
0.856g/mL es la densidad de esta sustancia
Ahora, debes identificar en la tabla, cuál sustancia tiene una densidad similar a la obtenida y, de esta manera, podrías saber a cuál sustancia corresponde.
(Please Help Im blowing most of my points for this)
In earthquake-prone areas, engineers design buildings that are resistant to earthquake damage. Here’s a diagram of an earthquake-resistant building in Japan. Explain how features A, B, and C help protect the building from earthquake damage. In your explanation, describe how you could model each feature using marshmallows and toothpicks.
Answer:
In this earthquake-resistant building, two steel supports in the shape of an X (A) help to reinforce walls. Concrete walls with steel bars in them (B) lessen any rocking movements. Shock absorbers (C) take up some of the building’s kinetic energy during a quake. I could use the toothpicks as the two steel in the shape of an X. The concrete walls and the shock absorbers would be the marshmallows.
Features shown by points A, B & C are reinforce walls, concrete walls and shock absorbers respectively.
What is earthquake?Earthquake is a kind of natural disaster in which an intense shaing of the earth's outermost layer takes place.
According to the image following points we will consider as:
Two steel supports in the shape of an X (A) help to reinforce walls in this earthquake-resistant structure.Any rocking movements are reduced by concrete walls with steel bars (B).During a quake, shock absorbers (C) absorb some of the kinetic energy of the building.We can use the toothpicks in the shape of X as the two steel and concrete walls & the shock absorbers as the marshmallows.
Hence, marshmallows are used as the concrete walls and toothpicks are used as two steel rods.
To know more about earthquake-resistant building, visit the below link:
https://brainly.com/question/15732302
#SPJ2
If the scientist measured the mass of the copper cube after it had been in the furnace for one hour what would the cube’s mass probably be? Explain your answer
justin noticed several cracks in the sidewalk. Weeds are growing through them, cause the crack to expand. What process is this?
Answer:
Explanation:
Weeds and Small Plant Roots Exploit Existing Concrete Cracks
Instead, the plant's roots take advantage of existing microscopic cracks. New cell growth takes place at the tips of plant roots. ... Eventually, molecule by molecule, the plant's growth can force its way into the slab and create a surface crack.