Answer:
10 kg
Explanation:
p=ma
25=2.5m
m=25/2.5
m=10 kg
mark as brainliest plzzzzz
A snowboarder travels 17 m [N], 25 m [S], then 33 m [N]. Choose the correct
statement about the snowboarder's motion *
A. The snowboarder has a larger distance travelled than displacement
B. The snowboarder has a larger displacement than distance travelled
C. The snowboarder has more inertia after the 25 m trip than after the 17 m trip
D. The snowboarder has constant acceleration
why can many ecosystems exit in one biome?
Answer:
Plants and animals that live in a biome must be able to live and reproduce in the conditions
Explanation:
What does it mean for two parameters to be inversely proportional?
that means the parameter over another
Explanation:
that is when you say a parameter is inversely proportional to another it means what ever happens to the first parameter the opposite happens to the other parameter
a rail car moving at 10m/s collides with and connect to another stationary car. What is their final velocity?
Assume they have the same mass
Answer:
read this it might help some
When a moving object collides with a stationary object of identical mass, the stationary object encounters the greater collision force. When a moving object collides with a stationary object of identical mass, the stationary object encounters the greater momentum change.
Explanation:
Four resistors , R1=12ohms, R2= 15 ohms , R3= 18 ohms and R4=10 ohms are connected to 6 v battery in series what is the total resistance in the circuit?
Answer:
55 ohms
Explanation:
if it was series circuit, then you just need to add all the resistances
20 A measure of the speed and direction of an object's motion
a. velocity
b. speed.
c. momentum
The pressure at the bottom of a lake is 300 000 N/m2 more than at the surface of the lake. The lake is fresh water (density = 1000 kg/m3).
Answer:
h = 30.61 m
Explanation:
In this problem they indicate the pressure at the bottom of the lake and the density of the water, for which they must ask what is the depth of the lake.
The pressure is given by the expression
P = [tex]P_{atm}[/tex] + rho g h
P - P_{atm} = rho g h
The gauge pressure value is P- P_{atm} = 3 105 N / m²
h = [tex]\frac{P - P_{atm}}{ \rho \ g}[/tex]
let's calculate
h = [tex]\frac{3 \ 10^5}{1000 \ 9.8}[/tex]
h = 30.61 m
The work done in lifting a brick of mass 2kg through a height of 5m above the ground will be
(A)2.5J
(B)10J
(C)50J
(D)100J
Answer:
D. 100 J
Explanation:
Given
Mass (m) = 2 kg
Height (h) = 5 m
Acceleration due to gravity (g) = 10 m/s²
Now
Work done(W)
= m * g * h
= 2 * 10 * 5
= 100 Joule
Hope it will help :)❤
The work done in uplifting a brick having a mass of 2kg along with a height of 5m above ground level would be:
D). 100 J
Given that,
Mass of the brick [tex]= 2Kg[/tex]
Height of the brick [tex]= 5m[/tex]
As we know,
Work Done (W) [tex]= mgh[/tex]
where
m = Mass
g = Acceleration due to gravity
h = height
A.T.Q.
By substituting the given values, we get;
[tex]Work Done (W)[/tex] [tex]= 2[/tex] × [tex]10[/tex] × [tex]5[/tex] (taking [tex]g = 10 m/s^2[/tex])
[tex]= 100 J[/tex]
Thus, the work done is 100 J and hence, option D is the correct answer.
Learn more about 'Work Done' here:
brainly.com/question/13662169
Explain why white light splits up into the different colours when it goes through a prism
Answer:
Light splits up into different colors because of the electromagnetic spectrum which makes the light bend, wavelength, and it makes different colors by it :3
Explanation:
:3
what’s the answer ???
Answer:
i cant even see it
Explanation:
Suppose A = B"Cm, where A has the dimensions LT, B has dimensions L²T-1, and C has dimensions LT2. Then the exponents n and have the values
Complete Question:
Suppose [tex]A = B^n C^m[/tex], where A has the dimensions LT, B has dimensions L²T⁻¹, and C has dimensions LT². Then the exponents n and m have the values
Answer:
The value of n = ¹/₅
The value of m = ³/₅
Explanation:
Given dimensions;
A = LT
B = L²T⁻¹
C = LT²
The values of n and m are calculated as follows;
[tex]LT = [L^2T^{-1}]^n[LT^2]^m\\\\L^1T^1 = [L^{2n}T^{-n}]\times [L^mT^{2m}]\\\\L^1 \times T^1 = [L^{(2n+m)}] \times [T^{(-n +2m)}]\\\\1 = 2n + m -----(1)\\\\1 = -n + 2m ----(2)\\\\from \ (1); \ m = 1-2n, \ \ substitute \ the \ value \ of \ m \ in\ (2)\\\\1= -n +2(1-2n)\\\\1 = -n + 2-4n\\\\1-2 = -5n\\\\-1 = -5n\\\\1= 5n\\\\n = \frac{1}{5} \\\\m = 1 - 2n\\\\m = 1 - 2(\frac{1}{5} )\\\\m = 1- \frac{2}{5} \\\\m = \frac{3}{5}[/tex]
Calculate the momentum of a 1000 kg sports car traveling at 30 m/s.
Answer:
30,000 kgm/s
Explanation:
m = 1000 kg
v = 30 m/s
Plug those values into the equation:
p = mv
p = (1000 kg)(30 m/s)
p = 30,000 kgm/s
The momentum of a 1000 kg sports car traveling at 30 m/s is 30,000 kgm/s.Linear momentum = Mass x Speed.
What is the momentum?The product of an object's mass, m, and its velocity, v, is the vector quantity known as linear momentum. It is represented by the letter "p," which is also used to denote momentum.
Mass of car = 1000 kg
Speed by which car moves = 30 m/s. The momentum of the car =?
Recall that:
Linear momentum = Mass x Speed
= 1000 kg x 30 m/s.
= 30,000 kgm/s
The sum of an object's mass (m) and velocity (v) is known as the object's linear momentum. An equation can be used to explain this relationship. Momentum is defined as the body's mass times its velocity. P = m times v, etc.
Therefore, the momentum of a 1000 kg sports car is 30,000 kgm/s if travels at 30 m/s.
Learn more about momentum, here:
https://brainly.com/question/15350658
#SPJ2
how do you find the kinetic energy of an object?
Answer:
KE = 1/2 * m * [tex]v^{2}[/tex]
Explanation:
use the formula:
KE = 1/2 * m * [tex]v^{2}[/tex]
KE = kinetic energy in joules (J)
m = mass in kg
v = velocity in m/s
Answer:
KE=1/2mv^2
Explanation:
I hope this helps it's just the formula.
KE=1/2×mass×velocity^2
You want to create a space station that is 50 meters in radius. If you want it to simulate Earth's gravitation, how fast must it go?
Answer:
w = 0.196 rad / s
Explanation:
To generate an acceleration similar to that of the earth, the station's centripetal acceleration must be equal to the acceleration due to gravity.
a_c = v² / r = w² r
a_c = g
we substitute
g = w² r
w² = g / r
w = [tex]\sqrt { \frac{g}{r} }[/tex]
let's calculate
w = √9.8/50
w = 0.196 rad / s
therefore the station must rotate at that angular velocity so that the acceleration in the outer wall is equal to the ratio of gravity
explain electrostatic force
Answer:
Electrostatics is a branch of physics that studies electric charges at rest. Since classical physics, it has been known that some materials, such as amber, attract lightweight particles after rubbing. The Greek word for amber, or electron, was thus the source of the word 'electricity'.
HELP ASAP!
1. Why do you think it is important for people to know when the tides will be high and/or low?
Many reasons. Here are a couple:
1.) Water depth for the draft of incoming ships/vessels so they do not run aground.
2.) Distance between sea level and bottom of structures such as bridges for vessels passing underneath.
acontainer is filled whith mercury to alevel of 10m whit water to alevel of 8m and whit oil to alevel of 5m the densities oil ,water and mercury are 0.8g/cm³,1g/cm³ and 13.6g/cm³ calculate the total pressure exerted by the liquids at the base
Answer:
1450.4 KN[tex]m^{2}[/tex]
Explanation:
Pressure = ρhg
where: ρ is the density of the liquid, h is the height and g the force of gravity.
Total pressure exerted by the liquids at the base = Pressure of oil + Pressure of water + Pressure of mercury
So that,
i. Pressure of oil = ρhg
(ρ = 0.8 g/cm³ = 800 kg/m³)
= 800 x 5 x 9.8
= 39200
Pressure of oil = 39200 N[tex]m^{2}[/tex]
ii. Pressure of water = ρhg
(ρ = 1 g/cm³ = 1000 kg/m³)
= 1000 x 8 x 9.8
= 78400
Pressure of water = 78400 N[tex]m^{2}[/tex]
ii. Pressure of mercury = ρhg
(ρ = 13.6 g/cm³ = 13600 kg/m³)
= 13600 x 10 x 9.8
= 1332800
Pressure of mercury = 1332800 N[tex]m^{2}[/tex]
So that,
Total pressure exerted by the liquids at the base = 39200 + 78400 + 1332800
= 1450400
= 1450.4 KN[tex]m^{2}[/tex]
Total pressure exerted by the liquids at the base is 1450.4 KN[tex]m^{2}[/tex].
When the north poles of two magnets are kept close , they will __________
attract
rotate
repel
remain unaffected
A chemical reaction is the only way to an
A: Element
B: Pure Substance
C: Mixture
D: Solution
Answer:
B: Pure Substance
Explanation:
Describe the components of the universe.
3-4 sentences
Answer:
The Universe is thought to consist of three types of substance: normal matter, 'dark matter' and 'dark energy'. Normal matter consists of the atoms that make up stars, planets, human beings and every other visible object in the Universe.
Explanation:
Answer:
Hey mate....
Explanation:
This is ur answer.....
According the NASA's StarChild Website, "The universe is a vast open space which contains all of the matter and energy in existence. The universe contains all of the galaxies, nebulae, stars, and planets. The exact size of the universe is unknown. Scientists believe the universe is still expanding outward.
The Universe is thought to consist of three types of substance: normal matter, 'dark matter' and 'dark energy'. Normal matter consists of the atoms that make up stars, planets, human beings and every other visible object in the Universe.
Hope it helps u,
Mark me brainliest plss......
FOLLOW ME! :)
In a free body diagram all the forces are depicted as pointing _______ the central box
Answer:
There are three forces acting upon the system - the gravity force (the Earth pulls down on the 15.0 kg of mass), the normal force (the floor pushes up on the system to support its weight), and the applied force (the hand is pushing on the back part of the system).
Explanation:
Answer:
what he said
Explanation:
A box moves 1000 m horizontally as a force F 2000 N is applied downward. What is the work done on the box by F during the displacement?
Answer:
D. OJ
Explanation:
What made ancient Rome special?
Answer:
Rome became the most powerful state in the world by the first century BCE through a combination of military power, political flexibility, economic expansion, and more than a bit of good luck. This expansion changed the Mediterranean world and also changed Rome itself.
Explanation:
1. What is the speed of an object and the direction it is moving?
Answer:
Velocity
Explanation:
Two 15 N forces in same directions are acting on an object. What is the magnitude of the net force?
Answer:
30N
Explanation:
if it is pushing the object to the left then it would be 30N left and if it is pushing the object to the right it would be 30N right
Answer: 30N
Explanation:
what is the correct equation for calculating kinetic energy?
1. kinetic energy = potential energy - total energy
2. kinetic energy = total energy - potential energy
3. kinetic energy = 1/2 x (total energy + potential energy)
4. kinetic energy = potential + total energy
Answer:
2. kinetic energy = total energy - potential energy
Explanation:
The total energy of a system is the addition of kinetic and potential energy of the system. Kinetic energy can be regarded as form of energy posses by an object when it's in motion
Total energy = kinetic energy + potential energy
(If we make Kinectic energy the subject of the formula, we have)
kinetic energy = total energy - potential energy
Help ASAP I’ll give u branliest!! This isn’t really hard
Answer:
I'm pretty sure it's mist, drizzle, droplet, and then rain.
Which of these is NOT a line on the tennis court?
Base line
Service line
Side line
Front line
Answer:
The answer would be Front Line
The base line, service line, and the side lines are the part of the tennis court however front line is not a part of the tennis court. Thus, the correct option is D.
What are the specifications of Tennis Court?
A tennis court is a 78ft long court, with a service line of 21ft from the net. The courts for singles tennis matches are 27ft wide in dimension, while the doubles matches courts are 36ft wide. The total playing area in tennis for a singles court is 2,106ft² and 2,808ft² for a doubles court.
The basic and important parts of a tennis court in both singles and doubles are the baseline, the center mark, the sidelines, the service lines, and the service boxes. The baseline is the boundary line at the ends of the tennis court, and the sidelines are the lines which mark the boundary line between in-bounds and out-of-bounds for both singles and doubles play.
Therefore, the correct option is D.
Learn more about Tennis Court here:
https://brainly.com/question/11929841
#SPJ6
Flexibility training helps reduce the range of motion of your joints and muscles.
True or false
please can someone please help me with this!!
i’ll give 15 points!!
Answer:
Explanation:
Time is a major factor in how much force is being applied. so when there are crumple zones. they crumple and that takes a little longer in an impact and hence lowers the forces considerably :) safety first