Answers
The connection of the circuit is shown in the image attached here.
What is a parallel?
When we heat that a connection is done in parallel our minds would have to go to a connection that is made to common junction. The implication of this is that there are wires that would come out from each of the cells and that the wires would be joined at a common point.
Many different applications, including electric automobiles where many batteries may be connected in parallel to enhance the range and power output of the vehicle, can benefit from the parallel connection of cells.
Learn more about parallel connection
:https://brainly.com/question/3752930
#SPJ1
Related Questions
Two moles of helium gas initially at 170 K
and 0.23 atm are compressed isothermally to
1.78 atm.
1): Find the final volume of the gas. Assume
that helium behaves as an ideal gas. The
universal gas constant is 8.31451 J/K · mol.
Answer in units of m3
2): Find the work done by the gas.
Answer in units of kJ.
3): Find the thermal energy transferred.
Answer in units of kJ.
Answers
The final volume of the gas is 9.16 × 10⁻³ m³, the work done by the gas is -0.0147 kJ, and the thermal energy transferred is 0.0147 kJ.
We can use the following equations to solve this problem:
Boyle's Law: PV = constant at constant temperature (isothermally)
Work done by a gas: W = -P∆V
Thermal energy transferred: Q = -W (assuming no heat transfer between the gas and its surroundings)
1. Given:
n = 2 mol (number of moles of helium gas)
T = 170 K (initial temperature)
P1 = 0.23 atm (initial pressure)
P2 = 1.78 atm (final pressure)
R = 8.31451 J/K·mol (universal gas constant)
Using Boyle's Law, we can write:
P1V1 = P2V2
V2 = (P1V1) / P2
V1 = (nRT) / P1 (using PV = nRT)
Substituting the given values:
V2 = (0.23 mol/m3 × 2 mol × 8.31451 J/K·mol × 170 K) / 1.78 atm
V2 ≈ 9.16 × 10⁻³ m³
Therefore, the final volume of the gas is approximately 9.16 × 10⁻³ m³.
2. The work done by the gas can be calculated using the equation:
W = -P∆V
Substituting the given values:
W = -(1.78 atm - 0.23 atm) × (9.16 × 10⁻³ m³)
W ≈ -0.0147 kJ
Therefore, the work done by the gas is approximately -0.0147 kJ.
3. The thermal energy transferred can be calculated using the equation:
Q = -W
Substituting the value of W obtained in part 2:
Q = -(-0.0147 kJ)
Q ≈ 0.0147 kJ
So, the thermal energy transferred is approximately 0.0147 kJ.
Hence, The gas has a final volume of 9.16 × 10⁻³ m³, does work of -0.0147 kJ, and transfers thermal energy of 0.0147 kJ.
To learn more about Workdone click:
https://brainly.com/question/28172139
#SPJ1
how do rainbows form in the sky
Answers
Answer:
Rainbows form in the sky when sunlight is refracted, or bent, as it enters a raindrop. This bending causes the different colors in the light to separate and spread out, forming the characteristic arc of a rainbow. The colors are arranged in a specific order, with red on the outer edge of the arc and violet on the inner edge. The colors are also more vivid when the sun is lower in the sky, such as during sunrise or sunset, because the light has to travel through more of the Earth's atmosphere to reach your eyes.
You want to push a car with a dead battery. You apply 200 N of force. The car does not move. Was your force balanced or unbalanced?
Answers
The force you applied to the car is balanced since the car does not move.
What is balanced and unbalanced force?
A force is said to be balanced when the sum of all the forces acting on object is equal to zero.
A force is said to be unbalanced when sum of all the firces acting on object is not equal to zero.
In other words, some of the force applied is greater than others.
So when you want to push a car with a dead battery and you apply 200 N of force, yet the car does not move, we can conclude that all the forces acting on the car are equal since the car is at equilibrium.
Learn more about balanced forces here: https://brainly.com/question/20880615
#SPJ1
A roller-coaster car with a mass of 900 kg starts at rest from a point 22 m above the ground. At point B, it is 8 m above the ground. [Express your answers in kilojoules (kJ).]
If the initial kinetic energy was zero and the work done against friction between the starting point and point B is 30,000 J (30 kJ), what is the kinetic energy of the car at point B?
Answers
Answer: 317.52
Explanation:
I'm just better
The period of a wave is 25 seconds. What is the webs frequency in Hz
Answers
Answer:
0.04 Hz
Explanation:
The formula for calculating frequency is f = 1/T, and T = the period of the wave. If the wave period is 25 seconds then the formula would be f = 1/25. 1/25 =0.04
1. Where is the magnetic field the strongest on a bar magnet?
a. Closest to the poles
b. A medium distance away from the poles
2. If a step-down transformer has 220 V coming into the primary coil of 30 turns and 140 V is coming out of the second coil, how many turns in are in the secondary coil?
a. 30
b. 19
c. 0.05
d. 7
Answers
1. The magnetic field the strongest on a bar magnet Closest to the poles.
2. There are 19 turns in the secondary coil
How do you calculate the turns in the secondary coil?To find the number of turns in the secondary coil, we say
Vp/Vs = Np/ Ns
Vp is for the primary voltage
Vs is for secondary voltage
Np is for primary turns
Ns is for secondary turns
This translates to;
220/140 = 30/ Ns
1.571 = 30/Ns
To find Ns, we say
Ns = 30/1.571
= 19
Find more exercises relating to turns in the secondary coil;
https://brainly.com/question/31369953
#SPJ1
A roller-coaster car with a mass of 900 kg starts at rest from a point 22 m above the ground. At point B, it is 8 m above the ground. [Express your answers in kilojoules (kJ).]
What is the potential energy at point B?
Answers
Answer: 317.52
Explanation:
I'm just him, so I just know
why does liquid candle wax flow but solid candle wax does not?
Answers
Answer:
Because the matter in solid objects doesn't move
Explanation:
Logic
If light goes through a single slit, what will be the pattern that will appear on the target screen?
a. A large bright band will appear directly across from the slit, that gets dimmer farther away from the center
b. Two large bright bands will appear on the target screen, with less bright bands in between them
c. Two large bright bands appear very distant from each other on the target with nothing but dark bands in between them
Answers
If the light goes through a single slit, the pattern that will appear on the target screen is: "A large bright band will appear directly across from the slit, that gets dimmer farther away from the center." The correct option is option A.
When light passes through a single slit, it diffracts and spreads out. This means that the light waves bend and interfere with each other as they pass through the slit, creating a pattern of bright and dark fringes on a screen behind the slit.
The central fringe is bright, with the maximum intensity of the light, and is surrounded by smaller and dimmer fringes on either side. These fringes are the result of constructive and destructive interference between the light waves passing through the slit.
The width of the slit plays an important role in determining the pattern of the fringes. If the slit is narrow, the diffraction of light will be more pronounced, resulting in a wider central fringe and smaller, more numerous side fringes. If the slit is wider, the central fringe will be narrower and the side fringes will be wider.
The distance between the slit and the screen also affects the pattern of the fringes. The closer the screen is to the slit, the wider the fringes will be, and the farther away the screen is from the slit, the narrower the fringes will be.
The diffraction of light through a single slit is an important phenomenon in physics and is used in various applications such as optical spectroscopy and the study of crystal structures.
Option B, "Two large bright bands will appear on the target screen, with less bright bands in between them," is incorrect. This pattern is actually the interference pattern that occurs when light passes through two parallel slits. When light passes through a single slit, the pattern is a central bright band with smaller, dimmer bands on either side.
Option C, "Two large bright bands appear very distant from each other on the target with nothing but dark bands in between them," is also incorrect. This pattern is the interference pattern that occurs when light passes through multiple slits, such as in a diffraction grating. When light passes through a single slit, the pattern is a central bright band with smaller, dimmer bands on either side.
Therefore, The correct answer is option A.
To learn more about Snell's Law of refraction click:
https://brainly.com/question/24321580
#SPJ1
In a non-uniform electric field, an electric dipole experiences ___ .
Answers
In a non-uniform electric field, an electric dipole experiences both a torque and a net force.
What more should you know about a non-uniform electric field?In a non-uniform electric field, the electric field lines are not parallel nor are they evenly spaced out. What this translates to is different parts of an electric dipole experience uneven magnitudes and directions of the electric field.
An electric dipole is a pair of opposite charges separated by a distance, which creates a dipole moment.
When there is a non-uniform electric field, the charges in the dipole have different forces in opposite directions.
Find more exercises that includes non-uniform electric field;
https://brainly.com/question/29577661
#SPJ1
The drawing shows four situations in which two very long wires are carrying the samecurrent, although the direction of the currents may be different. The point P in the drawings is equidistant from each wire. Which one (or more) of these situations gives rise to a zero net magnetic field at P?
Answers
Situation (a) results in a zero net magnetic field at point P. Option 1 is correct.
In situation (a), the two wires are carrying currents in opposite directions. At point P, the magnetic field due to one wire will be in the opposite direction of the magnetic field due to the other wire. Since the two fields are equal in magnitude and opposite in direction, they cancel each other out, resulting in a net magnetic field of zero at point P.
In situations (b), (c), and (d), the currents are either in the same direction or the wires are at different distances from point P. In these situations, the magnetic fields due to the wires do not cancel each other out at point P, resulting in a nonzero net magnetic field. Therefore, only situation (a) gives rise to a zero net magnetic field at point P. Option 1 is correct.
To know more about magnetic field, here
brainly.com/question/14848188
#SPJ1
1. Which mathematical function models the shape of a transverse wave?
a. Sine
b. Cosine
c. Tangent
2. What is the relationship between period and frequency?
a. Period is the inverse of frequency
b. Period is a multiple of frequency
c. Period is the quotient of frequency
d. Period is the sum of all the frequencies
Answers
A transverse wave can be modelled by a sine function
Period is the inverse of frequency
What is a wave?A wave's period is the length of time it takes to complete one cycle, whereas its frequency is the number of times it cycles through in a second.
The relationship can be expressed mathematically as T = 1/f, where T is the period in seconds and f is the frequency in hertz (Hz).
This indicates that as a wave's frequency increases, so does its period, and the opposite is also true.
Learn more about wave:https://brainly.com/question/25954805
#SPJ1
What is true about the requirements of your academic care plan
Answers
Care plans are a technique to approach academic tasks strategically and make them run more quickly. They also make it possible for an academic team to communicate effectively.
A nursing care plan's goal is to list the patient's needs, preferences, and the nursing interventions (or implementations) that are planned to address those goals.
The care plan is intended to guarantee continuity of care and is kept as a part of the patient's medical file.
To learn more about care plan, click:
https://brainly.com/question/28275330
#SPJ1
Have you ever seen long trains snake through the countryside? Sometimes a train will have two or more locomotives, or engines, pulling it. And, occasionally, a train will have one or more locomotives at the very end. Why would a train need more than one locomotive? Apply what you have learned about forces and net forces to explain what problems might be solved by adding locomotives to a train.
Help please D:
Answers
Trains with multiple locomotives are often used to address two primary issues related to forces and net forces: the need for additional power to pull a heavy load, and the need to distribute that pulling power more evenly across the length of the train.
A locomotive, also known as a "locomotive engine" or simply a "loco," is a type of railway vehicle that provides the motive power for a train. It is essentially a self-propelled engine that generates the power necessary to move the train along the tracks. Locomotives can be powered by various means, including steam, diesel, or electricity, and they typically feature a large, distinctive shape with a cylindrical body and a smokestack. The locomotive is often considered the most important part of a train, as it is responsible for providing the power and control needed to move the train safely and efficiently along the tracks.
First, trains carrying heavy loads such as coal, ore, or shipping containers require a lot of pulling power to get moving and keep moving at a steady speed. If a single locomotive isn't powerful enough to provide the necessary force to pull the entire train, additional locomotives can be added to increase the pulling power. This is known as "doubling up" or "tripling up" the locomotives, and it allows the train to move heavy loads more efficiently.
Second, adding locomotives to the front and back of a long train helps to distribute the pulling power more evenly across the length of the train. A long train can experience significant resistance or drag, which can slow down the train or even cause it to come to a stop. By adding locomotives at both ends, the pulling force is distributed more evenly throughout the length of the train, reducing the overall drag and making it easier to maintain a steady speed.
Therefore, adding locomotives to a train can help to provide additional power to pull a heavy load and distribute that pulling power more evenly across the length of the train. This allows the train to move more efficiently and maintain a steady speed, ultimately making it more productive and cost-effective for the transportation of goods.
To learn more about the efficiency of machines click:
https://brainly.com/question/12070328
#SPJ1
Help need asap need 13 and 14
Answers
13a. The height needed to obtain a potential energy of 2.2×10³ J is 0.18 m
13b. The height needed to obtain a potential energy of 2.8×10⁵ J is 22.86 m
14. The kinetic energy of the rock is 0.12 J
13a. How do i determine the height?The height needed can be obtained as follow:
Mass of car (m) = 1250 KgPotential energy (PE) = 2.2×10³ JAcceleration due to gravity (g) = 9.8 m/s² Height (h) =?PE = mgh
2.2×10³ = 1250 × 9.8 × h
2.2×10³ = 12250 × h
Divide both sides by 12250
h = 2.2×10³ / 12250
h = 0.18 m
Thus, the height needed is 0.18 m
13a. How do i determine the height?The height needed can be obtained as follow:
Mass of car (m) = 1250 KgPotential energy (PE) = 2.8×10⁵ JAcceleration due to gravity (g) = 9.8 m/s² Height (h) =?PE = mgh
2.8×10⁵ = 1250 × 9.8 × h
2.8×10⁵ = 12250 × h
Divide both sides by 12250
h = 2.8×10⁵ / 12250
h = 22.86 m
Thus, the height needed is 22.86 m
14. How do i determine the kinetic energy?The kinetic energy can be obtained as shown below:
Mass (m) = 8.5 lb = 8.5 / 2.205 = 3.85 KgVelocity (v) = 25 cm/s = 25 / 100 = 0.25 m/sKinetic energy (KE) =?KE = ½mv²
KE = ½ × 3.85 × 0.25²
KE = 0.12 J
Thus, the kinetic energy is 0.12 J
Learn more about kinetic energy:
https://brainly.com/question/25959744
#SPJ1
An object that is 0.5 m above the ground has the same amount of potential energy as a spring that is stretched 0.5 m. Each distance is then doubled
Answers
Elastic potential energy of spring is twice the gravitational potential energy of the object.
Height of the object, h = 0.5 m
Displacement of the spring, x = 0.5 m
Given that,
Potential energy of the object = Elastic potential energy of spring
mgh = 1/2 kx² = E
When the distance and height are doubled,
GPE = 2 mgh = 2E
Elastic PE = 1/2 k(2x)²
Elastic PE = 4 x 1/2 kx² = 4E
To learn more about potential energy, click:
https://brainly.com/question/23134321
#SPJ1
A racing car has a mass of 1530 kg. What is its kinetic energy if it has a speed of 120 km/h? Assume that air resistance is negligible.
Answers
The kinetic energy of the racing car is approximately 849952.4 J joules.
What is its kinetic energy of the car?Kinetic energy is simply a form of energy a particle or object possesses due to its motion.
It is expressed as;
K = (1/2)mv²
Where m is mass of the object and v is its velocity.
Convert the speed from kilometers per hour to meters per second since the units of mass and velocity need to be consistent.
We know that 1 km/h = 0.27777 m/s, so:
120 km/h x (0.27777 m/s/km/h) = 33.3336 m/s (rounded to 4 decimal places)
Now we can substitute the values into the formula:
Kinetic Energy = (1/2) × 1530 kg x (33.3336 m/s)²
Kinetic Energy = 849952.4 J
Therefore, the kinetic energy is approximately 849952.4 joules.
Learn more about kinetic energy here: https://brainly.com/question/27397088
#SPJ1
1. Which of the following makes Light waves unique compared to sound waves?
a. Light travels can move without a medium, unlike sound
b. Light's velocity is calculated with frequency and wavelength, unlike sound
c. Light can carry energy, unlike sound
d. Light's frequency can be altered, unlike sound
2. If a incident light ray approachs a mirror at an angle of 37 degrees from the perpendicular. What will be the angle of the reflected ray?
a. 18.5 degrees
b. 37 degrees
c. 53 degrees
d. 143 degrees
3. If light goes through a single slit, what will be the pattern that will appear on the target screen?
a. An alternating set of bright and dark bands of light will appear on the target screen
b. A large bright band will appear directly across from the slit, that gets dimmer farther away from the center
c. Two large bright bands will appear on the target screen, with less bright bands in between them
d. Two large bright bands appear very distant from each other on the target with nothing but dark bands in between them
Answers
At what time t2 will the water be completely frozen so the temperature can begin to fall below 0∘C ?
Express your answer numerically in seconds.
Answers
The time taken by the water to freeze and the temperature falls below 0°C is approximately 2940 s.
When the liquid(water) is changed to solid (ice), this process is called melting. The freezing point is a point at which the liquid changes into a liquid. The freezing point of water is 0°C.
From the given,
time taken by the water to freeze below 0°C in the graph (ie: -10°C and -20°C ) = 49 minutes.
1 minute = 60 seconds
49 min = 49×60 seconds = 2940 seconds.
The time taken (t₂) by the water to freeze below 0°C is 2940 seconds.
To learn more about the Melting:
https://brainly.com/question/14277318
#SPJ1
A satellite with a mass of 120kg fires its rocket thrusters, which give an impulse of 7440kg•m/s . What was the total change in the velocity of the satellite- that is, what was the total v
Answers
Impulse = Change in momentum
Impulse = force x time = mass x change in velocity
Change in velocity = Impulse / mass
In this case, the impulse is 7440 kg*m/s, and the mass of the satellite is 120 kg.
Therefore, the total change in velocity of the satellite is:
Change in velocity = Impulse / mass = 7440 kg*m/s / 120 kg = 62 m/s
So the total change in the velocity of the satellite is 62 m/s.
Question 2 of 10
X-ray technology can be used to do which of the following?
O A. Photograph through solid objects
B. Monitor human activity at night
OC. Speed up the process of hardening paint
O D. Communicate across long distances
SUBMIT
Answers
X-ray technology can be used to do Photograph through solid objects. option A
What is X-ray technology about?X-ray technology includes the utilize of high-energy electromagnetic radiation to make pictures of the interior of objects, counting the human body. X-rays are a sort of electromagnetic radiation with wavelengths shorter than unmistakable light, but longer than gamma beams.
X-ray innovations includes the use of high-energy electromagnetic radiation to make pictures of the interior of objects, counting the human body. X-rays are a sort of electromagnetic radiation with wavelengths shorter than visible light, but longer than gamma beams.
Lastly, X-ray innovation is utilized in a assortment of other applications, such as air terminal security scanners, which utilize X-rays to form pictures of gear and other objects to distinguish potential dangers.
Learn more about X-ray technology from https://brainly.com/question/12384544
#SPJ1
Which description accurately describes the tide represented by the image below? (4 points)
Image of the sun and moon at a 90 degree angle to Earth. An oval is around Earth that points toward and away from the moon to show the tidal bulges.
High tides occur when the sun and moon are at right angles to one another.
Low tides occur when the sun and moon are at right angles to one another.
The gravitational pull of the sun and moon combined creates larger than normal tides.
The gravitational pull of the sun reduces the moon's gravitational pull to create moderate tides.
Answers
High tides occur when the sun and moon are at right angles to one another. This is because the gravitational pull of the moon and the sun combine to create larger-than-normal tides, known as spring tides. The correct option is A.
Gravitational pull is the force of attraction that exists between two objects with mass. The greater the mass of an object, the greater its gravitational pull.
Option B, "Low tides occur when the sun and moon are at right angles to one another," is incorrect. Low tides occur when the sun and moon are at a 90-degree angle (or "quarter moon") to each other, but this position also results in high tides on the opposite side of the Earth.
Option C, "The gravitational pull of the sun and moon combined creates larger than normal tides," is partially correct. The gravitational pull of both the sun and moon does contribute to the tides, but the specific position depicted in the image (sun and moon at right angles to each other) does not necessarily create larger than normal tides.
Option D, "The gravitational pull of the sun reduces the moon's gravitational pull to create moderate tides," is also incorrect. The sun's gravitational pull does have an effect on the tides, but it does not reduce the moon's gravitational pull. Rather, the combined gravitational pull of the sun and moon creates the tides we observe.
Therefore,The accurate description of the tide represented by the image below is option A: "High tides occur when the sun and moon are at right angles to one another."
To learn more about Gravitational potential energy click:
brainly.com/question/31096472
#SPJ1
✦
Joey rolls several objects down a grassy hill. Which force is acting on the objects which cause the objects to slow down?
A. Friction
B. Normal
C. Applied
D Magnetic
Answers
friction
Friction is what causes moving objects to slow down and eventually stop.
What is the gravitational force acting on a 83.4-kg person due to a 65.6-kg person standing 1.21 m away?
Answers
The gravitational force acting on the 83.4-kg person due to the 65.6-kg person is approximately 3.14 x 10^-8 N.
What is gravitational force ?The gravitational force is an attraction between any two mass-containing objects.
The following formula determines the gravitational force between two objects:
F = G * (m1 * m2) / r2.
where
F represents forceG stands for gravity constantThe two objects' masses are m1 and m2 r is the separation between their centers of massPlugging in the given values, we have:
F = (6.67 x 10^-11 N * m^2 / kg^2) * (83.4 kg) * (65.6 kg) / (1.21 m)^2
F = 3.14 x 10^-8 N
Therefore, the gravitational force acting on the 83.4-kg person due to the 65.6-kg person is approximately 3.14 x 10^-8 N.
Learn more about gravitational force here : brainly.com/question/29328661
#SPJ1
Gustave Eiffel built the Eiffel Tower (1887-89) for the______In 1889.
World's Fair
Panama Pacific Exhibition
Salon
Great Exhibition
Answers
Gustave Eiffel built the Eiffel Tower (1887-89) for the World's Fair in 1889.
Who is Gustave Eiffel ?The edifice as we know it was built in the city of Paris in the country that we call France to commemorate the 100th anniversary of the French Revolution.
The Eiffel Tower was initially intended to be a temporary project, but because of its popularity, it was permitted to stand after the exhibition was over.
It can be seen in the contemporary times as a symbol of Paris and one of the most recognizable landmarks in the entire globe.
Learn more about Gustave Eiffel :https://brainly.com/question/8756644
#SPJ1
Fill in the blanks to complete each statement about the age of Earth.
According to scientific evidence, Earth is approximately 4.6
years old.
Scientists used
dating to determine Earth’s age.
Answers
The age of the earth is 4.6 billion years old. and scientist used radioactive dating to determine the Earth’s age.
Scientists used radiometric dating to determine Earth's age. Radiometric dating is a technique that uses the decay of radioactive isotopes to determine the age of rocks and other materials. By measuring the ratio of parent isotopes to daughter isotopes, scientists can calculate how long ago a rock or mineral formed. This method has been used to estimate the age of the Earth and other objects in the solar system.
To know more about scientist
https://brainly.com/question/16329487
#SPJ1
Answer: billion, radioactive
Explanation:
Do you think Kepler will be able to detect Earth-sized planets in transit?
Answers
Answer: Less than 1% of the stars that Kepler will be looking at are closer than 600 light years. Stars farther than 3,000 light years are too faint for Kepler to observe the transits needed to detect Earth-size planets.
Explanation:
How far, and in what direction, should a cellist move her finger to adjust a string's tone from an out-of-tune 454 Hz to an in-tune 440 Hz? The string is 68.0 cm long, and the finger is 19.2 cm from the nut for the 454-Hz tone. (Assume the tone comes from the portion of the string between the cellist's finger and the end opposite the nut. Assume the string vibrates in the fundamental mode. Take the direction towards the nut to be positive. Indicate the direction with the sign of your answer.)
Answers
The cellist should move her finger in the negative direction by 3.17 cm to adjust the string's tone from 454 Hz to 440 Hz.
To adjust the string's tone from 454 Hz to 440 Hz, the cellist needs to increase the tension in the string. This can be achieved by shortening the length of the string, which the cellist can do by moving her finger closer to the nut.
We can use the formula for the fundamental frequency of a vibrating string to calculate the required change in length:
[tex]f = (1/2L)*\sqrt{T/u}[/tex]
where f is the frequency, L is the length of the string, T is the tension in the string, and μ is the linear mass density of the string.
Since the string length and tension are constant, we can write:
f ∝ 1/√μ
So the frequency is inversely proportional to the square root of the linear mass density.
We can use the known frequency ratio to find the required change in linear mass density:
454 Hz / 440 Hz = sqrt(μ₂/μ₁)
where μ₁ is the initial linear mass density and μ₂ is the final linear mass density.
Solving for μ₂, we get:
μ₂ = μ₁ * [tex](454/440)^2[/tex]
μ₂ = 1.065 * μ₁
So the linear mass density needs to increase by 6.5%.
The cellist's finger is initially 19.2 cm from the nut for the 454 Hz tone. To adjust the string to the 440 Hz tone, the cellist needs to move her finger closer to the nut by a distance that shortens the vibrating portion of the string by 6.5%.
The total length of the string is 68.0 cm, so the portion of the string between the nut and the finger is initially 68.0 cm - 19.2 cm = 48.8 cm.
To shorten the vibrating portion of the string by 6.5%, the cellist needs to move her finger by a distance of:
Δx = 0.065 * 48.8 cm
Δx ≈ 3.17 cm
Since the direction towards the nut is defined as positive, the cellist should move her finger in the negative direction by 3.17 cm to adjust the string's tone from 454 Hz to 440 Hz.
Learn more about Linear mass density at
brainly.com/question/13262805
#SPJ1
The femur of a human leg (mass 10 kg,
length 0.9 m
) is in traction, as shown in the figure. The center of gravity of the leg is one-third of the distance from the pelvis to the bottom of the foot. Two objects, with masses 1
and 2,
are hung at the ends of the leg using pulleys to provide upward support. A third object of 8 kg
is hung to provide tension along the leg. The body provides tension as well.
Write a mathematical relationship relating 1
to 2
in terms of 2
and numerical coefficients.
Answers
The mathematical relationship between m₁ and m₂ is that m₁ is twice the value of m₂.
Length of the femur, L = 0.9 m
Mass of the femur, M = 10 kg
Centre of gravity = L/3
m₁ + m₂ = M
T₁ + T₂ = Mg
m₁g + m₂g = Mg
T₁ + T₂ = m₁g + m₂g
T₁(L/3) = T₂(2L/3)
m₁g(L/3) = 2m₂mg(L/3)
Therefore,
m₁ = 2m₂
To learn more about tension, click:
https://brainly.com/question/14177858
#SPJ1
A block with mass 0.50 kg
is forced against a horizontal spring of negligible mass, compressing the spring a distance of 0.20 m
(Figure 1). When released, the block moves on a horizontal tabletop for 1.00 m
before coming to rest. The spring constant k
is 100 N/m
What is the coefficient of kinetic friction μk
between the block and the tabletop?
Answers
Answer:100
Explanation: