Answer:
Partial Pressure of X = 0.45 atm
Partial Pressure of Y = 1.05 atm
Explanation:
Mixture of gas = Gas X + Gas Y
Total number of moles = 3 + 7 = 10 moles
Total pressure = 1.50 atm
The relationship between partial pressure, total pressure and number of moles is given as;
Partial pressure of gas X / Total pressure = Number of moles of gas X / Total number of moles
Partial Pressure of gas X / 1.50 = 3 / 10
Partial Pressure of gas X = 1.5 * 3 / 10 = 0.45 atm
The total pressure of a mixture is a sum total of the individual pressures, hence;
Pressure of mixture = Partial Pressure of X + Partial pressure of Y
1.5 = 0.45 + Partial pressure of Y
Partial Pressure of Y = 1.5 - 0.45 = 1.05 atm
Suppose you used 0.5 M NaOH to titrate your vinegar sample instead of 0.1 M. What effect does the concentration of base added have on the reliability of the results of your titration?
Answer: the reliability will be worse
Explanation:
Suppose we used 0.5 M NaOH to titrate our vinegar sample instead of 0.1 M.
Now by using 0.5M instead of 0.1M we are increasing the concentration of NaOH,
We know that the moles used = Volume x concnetration.
so for the same no of moles, if the concentration increases, the volume decreases.
Hence it will consume less NaOH.
now Since the volume decreases, the titration volume of less number will increase the % error.
Therefore the reliability will be worse.
The effect that the concentration of the added base has on the reliability of the results of the titration in question is; The reliability will be worse.
We are told that;
0.5 M NaOH is to be used to titrate a vinegar sample instead of 0.1 M.
Now, 0.5 M means a concentration of 0.5 and since it is higher than 0.1M, it means the concentration of NaOH will increase.
Formula for number of moles used is;
n = V × M
Where;
n is number of moles
V is volume
M is concentration
We can see that number of moles is directly proportional to the volume and concentration.
Thus, if the number of moles remains unchanged, as we have increased the concentration, it means that the volume will decrease.
Thus, lesser volume of NaOH will be used and as a result of this decrease in volume, there will be a greater possibility of error.
In conclusion, we can say that the reliability will be worse.
Read more at;https://brainly.com/question/22702792
What energy allows for the difference in the spacing of molecules in a liquid versus a gas?
A. Electrical energy
B. Radiant energy
C. Potential energy
D. Kinetic energy
Answer:
kinetic energy
Explanation:
yeah it's correct
There are no self-sustaining fusion reactors operating in the world because there is currently a lack of:____________.
A) a way to achieve the extremely high temperatures needed for a fusion reaction
B) a method to dispose of the waste produced by fusion reactions
C) a way to contain fusion reactions
D) materials that will participate in fusion
Answer:
b is the correct answer....
To solve such this we must know the concept of fusion reactions. Therefore, the correct option is option B that is a method to dispose of the waste produced by fusion reactions.
What is chemical reaction?Chemical reaction is a process in which two or more than two molecules collide in right orientation and energy to form a new chemical compound. The mass of the overall reaction should be conserved.
Fusion processes, which convert protons into heavier elements, are the source of energy generation in stars. They are also a possible source of energy for contemporary industrial society. The transformation of hydrogen to helium is the primary source of energy in stars. There are no self-sustaining fusion reactors operating in the world because there is currently a lack of a method to dispose of the waste produced by fusion reactions.
Therefore, the correct option is option B.
Learn more about the chemical reactions, here:
https://brainly.com/question/3461108
#SPJ5
Question 8 (3 points) What is the formula for Silver (III) sulfide? O Ag2(SO4)3 O Ag3(SO4)2 Ag3S2 Ag2S3
The formula of Silver (III) Sulfide is Ag2S3.
Hope this helps. Please mark brainliest!
A 12.0% sucrose solution by mass has a density of 1.05 gem, what mass of sucrose is present in a 32.0-mL sample of this solution?
A) 0.126g
B) 3.66g
C) 4.03g
D) 3.84g
E) 280 g
Answer:
Option C. 4.03 g
Explanation:
Firstly we analyse data.
12 % by mass, is a sort of concentration. It indicates that in 100 g of SOLUTION, we have 12 g of SOLUTE.
Density is the data that indicates grams of solution in volume of solution.
We need to determine, the volume of solution for the concentration
Density = mass / volume
1.05 g/mL = 100 g / volume
Volume = 100 g / 1.05 g/mL → 95.24 mL
Therefore our 12 g of solute are contained in 95.24 mL
Let's finish this by a rule of three.
95.24 mL contain 12 g of sucrose
Our sample of 32 mL may contain ( 32 . 12) / 95.24 = 4.03 g
How many moles are in the 100,000g of CuSO4 • 5H2O ?
Answer:
try (107.87 amu)
Explanation:
c. What might have happened in Kush and Egypt if Kush had developed iron
weapons?
Answer:
Kush would have been able to fight better and probably would have never been invaded by Egypt, and they could have beaten the Assyrians when they tried to takeover Egypt. And the 25th dynasty would have continued.
Explanation:
that is my explanation and answer^
Write the net ionic equation for Potassium chloride + sodium nitrate
I believe the answer is this:
KCl + NaNO3 --> KNO3 + NaCl.
Answer:
No reaction
Explanation:
KCl + NaNO3 --> KNO3 + NaCl
Since these substances are all aqueous (no precipitates or other phases involved), if you were to write the ionic equation and cross out spectators, they'd all cancel so there is no reaction.
Can someone answer 3’for me please?
Based on the information in the table, which of the following arranges the bonds in order of decreasing
polarity?
Choose 1 answer:
H-S > Sn-Te > Si-F
Sn-Te > H-S > Si-F
Si-F>H-S > Sn-Te
Si-F > Sn-Te > H-S
Answer:
what grade so i can help
Explanation:
Answer:
I believe it’s Sn-Te > H-S > Si-F
Explanation:
What is the scale called that measures the strength of an acid or base in solution?
A the Color scale
B pH scale
C The litmus test
D The number scale
Answer:
The answer is B. pH scale
Answer:
pH scale
Explanation:
ph scale basically measures the acidity and basicity of the solution
What are the roles of chlorophll, light, carbon dioxide, and water in the production of food and oxygen for a plant? (15 points to answer)
Explanation:
Chlorophyll make food the plant can use from carbon dioxide, water, nutrients, and energy from sunlight. This process is called photosynthesis. During the process of photosynthesis, plants release oxygen into the air. People and animals need oxygen to breathe.
hope it helps!
From acetic acid how to get formic acid ?
Answer:
The Reaction of acetic acid withNaN3 gives out methylamine. rxn of methylamine to HNO2 to give out methanol. oxidation of methanol via Kcr207(H+) to give formic acid.
What is the visual differences between elements compounds and mixtures
Answer: yes I can do that tomorrow
Explanation:
Which of the following is not a required characteristic for a living organism?
A) reproduction
B) mobility
C) homeostasis
D) adaptation
Answer:
B
Explanation:
living things are not required to move
A 5.0 g sample of metal was heated from 10°C to 40. °C. It absorbed 43.7 J of energy as heat. What is the specific heat of this piece of metal?
Answer:
Balls
Explanation:
Cuz
g Which statement concerning the structure of the atom is correct? Protons and neutrons have most of the mass and occupy most of the volume of the atom. Electrons have most of the mass but occupy very little of the volume of the atom. Electrons have most of the mass and occupy most of the volume of the atom. Protons and neutrons have most of the mass but occupy very little of the volume of the atom.
Protons and neutrons have most of the mass but occupy very little of the volume of the atom.
The statement concerning the structure of the atom is correct is Protons and neutrons have most of the mass but occupy very little of the volume of the atom. Therefore, option D is correct.
What is an atom ?Each atom is made up of a nucleus and one or more electrons that are linked to it. One or more protons and a significant number of neutrons make up the nucleus. Only the most prevalent type of hydrogen is neutron-free. Atoms that are neutral or ionized make up every solid, liquid, gas, and form of plasma.
But when it comes to the name atom, we must travel back to 400 B.C. ancient Greece. The Greek word atomos, which meaning "uncuttable," was proposed by Democritus, a renowned philosopher. In the end, all matter could be reduced to distinct, tiny particles, or atomos, he said.
The smallest unit of matter that may be divided without producing electrically charged particles is the atom.
Thus, option D is correct.
To learn more about an atom, follow the link;
https://brainly.com/question/29695801
#SPJ5
Occurs when the membrane surrounds a large substance and engulfs it.
) Active Transport
O Diffusion
O Endocytosis
Exocytosis
for the following equation to be bal
Answer:
What's the rest of the question
Explanation:
The electron configuration for an element is 1s2 2s2 2p6 3s2 3p6. What is the atomic number of the element? *
A. 3
B. 11
C. 18
D. 22
Explanation:
Electronic configuration =
1s² 2s² 2p⁶ 3s² 3p⁶
Atomic number = 18Element = ArgonSymbol = ArGroup = 18period = 3Therefore,
Option C is correct✔
According to the electronic configuration, the atomic number of the element is 18.
What is electronic configuration?Electronic configuration is defined as the distribution of electrons which are present in an atom or molecule in atomic or molecular orbitals.It describes how each electron moves independently in an orbital.
Knowledge of electronic configuration is necessary for understanding the structure of periodic table.It helps in understanding the chemical properties of elements.
Elements undergo chemical reactions in order to achieve stability. Main group elements obey the octet rule in their electronic configuration while the transition elements follow the 18 electron rule. Noble elements have valence shell complete in ground state and hence are said to be stable.
Learn more about electronic configuration,here:
https://brainly.com/question/14283892
#SPJ2
In a carbon dioxide molecule, a double covalent bond forms when the carbon atom shares what
pairs of valence electrons with each oxygen atom.
Answer:
2 pair of an electron
Explanation:
carbon having 6 valence electron 2 electron involved in covalent bonding so 4 electron means 2 pairs of an electron will left.
WILL BRAINLIEST !!
Which of the following transitions produces light with the longest wavelength?
A. 2—>1
B. 3—>1
C. 4—>2
D. 4—>3
How many atoms are in 2.37 moles of Krypton
Answer:
1.43 × 10²⁴ atoms Kr
General Formulas and Concepts:
Chemistry - Atomic Structure
Using Dimensional AnalysisAvogadro's Number - 6.022 × 10²³ atoms, molecules, formula units, etc.Explanation:
Step 1: Define
2.37 mol Kr
Step 2: Convert
[tex]2.37 \ mol \ Kr(\frac{6.022 \cdot 10^{23} \ atoms \ Kr}{1 \ mol \ Kr} )[/tex] = 1.42721 × 10²⁴ atoms Kr
Step 3: Check
We are given 3 sig figs. Follow sig fig rules and round.
1.42721 × 10²⁴ atoms Kr ≈ 1.43 × 10²⁴ atoms Kr
Write the formula for diphosphorous pentoxide
Answer:
P4O10
Explanation:
Which is an example of a compound? * He3 or H2O or C
Answer:
H2O
Explanation:
There is more than one element
Please answer. Thank you
Answer:
Explanation:
what are tho anwser choices
Density = Mass
Volume
To find the density of a solid:
Find the mass of the block.
Find the volume of the block using (length x width x height)
Use the equation to find density.
#1 #2 #3 #4 #5 = (2x3x4) #1/#5
Block #
Mass (g)
Length (cm)
Width (cm)
Height (cm)
Volume
(cm3)
Density (g/cm3)
1
75
6
3
4
72
1.04
2
3
4
5
6
7
8
Follow up questions:
Which two blocks were made out of the same material?
How do you know?
Does a larger block always have a higher density?
Answer:
what is it all about???
Middle school science help please. ill give brainliest
Answer:
It converts The liquid into a gas at the same temperature.
Explanation:
Answer:
it converts the liquid into gas at the same temperature
Explanation:
when heat is added to a liquid at boiling temperature it converts the liquid into gas at that same boiling temperature
please give brainliest
How many joules are required to melt 250 grams of water
Answer:
i not sure but i searched it up and it said Q=104525J
Explanation:
How many atoms of carbon are present in the products?
6CO2+6H2O=C6H12O6+6O2
Answer:
2.41 * 10^24 atoms of carbon present in the products.
Explanation:
First, we need to find the moles of carbon in the products in order to find the number of atoms.
We see that in the chemical formula, carbon belongs to the compound known as glucose. To get the amount of moles of carbon, we need to divide my the amount of carbon within glucose (in grams) from the total amu ( or grams) of glucose to get the moles.
C6 = 72.066.
C6H12O6 = 180.156
72.066/180.156 = 0.4000199827 moles of Carbon within the Glucose compound
Now we will convert to atoms/molecules by multiplying the moles by avogadro's number..
0.4000199827 moles C * 6.022*[tex]10^{23}[/tex] = 2.408920336 *[tex]10^{24}[/tex] atoms of Carbon present in the products
*Note --> this can be estimated to 2.41 * [tex]10^{24}[/tex] atoms of Carbon