Answer:
you need to divide 7500/286.2
While spending the weekend in your cabin, you burn wood in your pot-bellied stove to heat a kettle of water for tea.
Answer the following questions for 2 points each:
1. What type of energy does the wood have in this situation. Explain your answer.
2. What type of energy is this transformed into as the wood it burned in the stove. Explain your answer.
3. What type of heat transfer is being used to warm the kettle of water? Why does the water eventually boil?
Answer: 1 = Heat
2=gas
3=it gets hot enough to boil because the metal conducts the heat into the water to heat it up and eventually boil.
Explanation: its common sense
pls help i will give u brianliest!
Answer:
Explanation:
neautrons and protons
plz help urgent
will give brainliest
Answer:
D
Explanation:
Highest Pressure in water is always at the bottom
A 3 kg rubber block is resting on wet concrete. The coefficient of static friction is 0.3. What is the minimum force that must be applied to the block to make the block begin to accelerate?
Answer:
You would have to find the friction force of the rubber block which would be found with the equation of Normal force (mass*gravity) times cooeficient of friction which would give 8.82 N for the amount of friction and because you need more force than 8.82 N (assuming gravity is 9.8)
We need to find the frictional force of the rubber block. This is the normal force (mass × gravity) multiplied by the coefficient of friction, which gives us a friction quantity of 8.82N. This is because it requires a force greater than 8.82N (Gravity is 9.8)
What is coefficient of friction?Mathematically, = F/N, where F represents the frictional force and N represents the normal force. Because F and N are both measured in force units (such as Newtons or Pounds), the coefficient of friction is dimensionless.The friction coefficient is the ratio of the frictional force resisting movement of two contacting surfaces to the normal force pushing the two surfaces together.Both F and N are measured in units of force (such as Newtons or Pounds), so the coefficient of friction is dimensionless. The coefficient of friction has different values for static friction and sliding friction.In stiction, the frictional force resists the force applied to the object and the object remains stationary until the force of stiction is overcome. In kinetic friction, the frictional force opposes the motion of an object.To learn more about coefficient of friction, refer to:
brainly.com/question/20241845
#SPJ2
what is the number of significant digits in the measurement 10.005m?
What is the common property of the elements pinctogen
Answer:
The pnictogens consist of two non-metals, two metalloids, one metal, and one element with unknown chemical properties. All the elements in the group are solids at room temperature, except for nitrogen which is gaseous at room temperature.
Only visibly rough surfaces have friction between them
YO YO I NEED HELP!!!
Answer: Light energy
Explanation: Light energy is a form of radiant energy that is visible to the human eye.
The car's initial speed was 15 m / s and the distance the car travels before it comes to a complete stop after the driver applies the brakes is 63m. What is the magnitude of the car's acceleration?
Initial speed of the car (u) = 15 m/s
Final speed of the car (v) = 0 m/s (Car comes to a complete stop after driver applies the brake)
Distance travelled by the car before it comes to halt (s) = 63 m
By using equation of motion, we get:
[tex] \bf \longrightarrow {v}^{2} = {u}^{2} + 2as \\ \\ \rm \longrightarrow {0}^{2} = {15}^{2} + 2 \times a \times 63 \\ \\ \rm \longrightarrow 0 = 225 + 126a \\ \\ \rm \longrightarrow 126a = - 225 \\ \\ \rm \longrightarrow a = - \dfrac{225}{126} \\ \\ \rm \longrightarrow a = - 1.78 \: m {s}^{ - 2} [/tex]
[tex] \therefore [/tex] Acceleration of the car (a) = -1.78 m/s²
Magnitude of the car's acceleration (|a|) = 1.78 m/s²
Which of the following games below involves different manipulative skills like throwing and rolling and some motor skills?
Group of answer choices
target games
invasion games
striking and fielding games
physical activity
Answer:
striking and fielding
Explanation:
striking and fielding
The motion of a car on a position time graph is represented with a horizontal tine What does this indicate about the car's motion?
Answer:
Position-Time graphs display the motion of a object by showing the changes of velocity with respect to time.
The motion of a car on a position-time graph that is represented with a horizontal line indicates that the car has stopped moving.
A straight line with a positive slope indicates that the car is moving at a constant velocity, and thus the slope is constant. On the other hand, a curve with a changing slope, shows that the velocity is changing.
Plz help !!!!!! ................................
Answer:
I think the answer is B. Can I have brainlest if I am right, please?
Explanation:
Answer:
it is B because period =1/ frequency and B has lower period
What are gears and what is a lever ?
Answer:
agear lever or agear stick is the lever that you use to change gear in acar or other vehicle
where is the centripetal force directed on a banked curve?
Answer:
The net force on a car traveling around a curve is the centripetal force, Fc = m v2 / r, directed toward the center of the curve.
Explanation:LET ME KNOW IF ITS WRONG. HAVE A NICE DAY!!!!!!!!!!
Answer: The net force on a car traveling around a curve is the centripetal force, Fc = m v2 / r, directed toward the center of the curve. The centripetal force is directed at right angles to the motion and also along the radius towards the centre of the circular path. In order for a car to move around a circular track, something must provide a centipetal force. One source of the centripetal force is friction between the tires and the road. This means that the tires do not need to supply any friction at all to keep the car from slipping sideways. ...
Hope this helps... stay safe and have a great day!!! :D
whats the net force
Answer:
13n pushing left
Explanation:
1563 - 1550
HELPP!! Does anybody have the answer key to Lab Report: Conservation of Linear Momentum for my online class for physics?? WILL GIVE 80points
Answer:
Try copy and pasting the intructions it into google, and it should pop up if it exists.
Hope this helps.
Explanation:
Answer:
Send me the download of the lab and I will complete it for you
A force of 30 Newtons is used to push a basket along the floor a total distance of 3 meters. How much work is done on the basket?
Answer:
the total work done is 90J
Explanation:
the reason why is because you are the force (30 newtons) and the metere (3) so you will be multiplying those two numbers together.
W= FD 30(3)= 90J
A paintball is fired horizontally from a tower 45 m above the ground. If the paintball gun fires at 90 m/s… How long does it take for the paintball to hit the ground? How far away from the tower will the paintball land?
Answer:
The time taken for the paint ball to hit the ground is [tex]t = 2.143 \ s[/tex]
The distance of the landing point from the tower is [tex]d = 192.86 \ m[/tex]
Explanation:
From the question we are told that
The height of the tower is [tex]h = 45 \ m[/tex]
The speed of the paintball in the horizontal direction is [tex]v_x = 90 \ m/s[/tex]
Generally from kinematic equation we have that
[tex]h = ut + \frac{1}{2} at^2[/tex]
Here u is the initial velocity of the paintball in the vertical direction and the value is 0 m/s , this because the ball was fired horizontally
a is equivalent to [tex]g = 9.8\ m/s^2[/tex]
t is the time taken for the paintball to hit the ground
So
[tex]45 = 0* t + \frac{1}{2} 9.8 * t^2[/tex]
=> [tex]t = 2.143 \ s[/tex]
Generally the distance of its landing position from the tower is
[tex]d = v * t[/tex]
=> [tex]d = 90 * 2.143[/tex]
=> [tex]d = 192.86 \ m[/tex]
A truck moving due south takes a turn and starts moving towards east while maintaining the same speed.
Its velocity remains constant.
It covers unequal distances in equal intervals of time.
Its velocity changes
None of the above
Answer:
Its velocity changes
Explanation:
When the truck changes direction, its velocity changes.
Velocity is a vector quantity that specifies the magnitude of motion and direction it is taking.
When direction changes, the velocity of a body will also change. This is unlike speed which is a scalar quantity.
Velocity is the displacement divided by time taken.
A horse accelerates from rest for 1 s and covers a distance D. If instead the accelerates from rest with the same accelerations for 2 s will the distance it covers be equal to 2D, 4D, or 9D
Answer:
4D
Explanation:
We will use 2nd equation of motion in this question:
s = Vi t + (0.5)gt²
where,
s = distance covered
t = time taken
g = acceleration due to gravity
For t = 1 s:
s = D
Therefore,
D = (0 m/s)(1 s) + (0.5)g(1 s)²
D = 0.5g -------------- equation (1)
For t = 2 s:
s = D
Therefore,
s = (0 m/s)(1 s) + (0.5)g(2 s)²
s = 0.5g(4)
using equation (1):
s = 4D
therefore, correct answer is:
4D
Why are recessive traits not seen even though they are present in the alleles?
Answer:
Explanation:. The vending machine holds 10 bags of pretzels and 8 packs of cheese crackers. Both the pretzels and crackers dispenseat 2 bags per hour. How many hours will elapse when there is the same number of snacks remaining in the vending machine? How many of each item will there be at this point?Equation1______________________________Equation2_______________________________Hours: ___________________________ Items: ____________________________What does each equation have n common? ______________________How does this affect the solution?
When a wire moves through a magnetic field, an electric current is produced in the wire. Why does this phenomenon occur?
Answer:
The negative charges and positive charges in the wire are pushed in the opposite directions by the magnetic field .
Explanation:
Hope this helps
When a wire moves through a magnetic field, an electric current is produced in the wire, and the phenomenon to which this is referring is called electromagnetic induction, as presented in option A.
What is electromagnetic induction?A magnetic field is a region in space where a magnetic force can be detected, so when a wire moves through a magnetic field, the magnetic force exerted on the wire generates a voltage, and the voltage creates an electric current in the wire. This electromagnetic induction phenomenon occurs because of the movement of charged particles within the wire, and this phenomenon can be explained by Faraday's Law of Electromagnetic Induction.
Hence, an electric current is produced in the wire, and the phenomenon to which this is referring is called electromagnetic induction, as presented in option A.
Learn more about electromagnetic induction here.
https://brainly.com/question/26334813
#SPJ6
The question is incomplete, complete question is below
When a wire moves through a magnetic field, an electric current is produced in the wire. Why does this phenomenon occur?
A) electromagnetic induction
B)magnetic force
How should the student change the circuit to give negative values for current and
potential difference?
Answer:
changing the polarity or direction of the battery changes the sign of the voltage and the current
Explanation:
The sign of current and voltage are due to established conventions.
The way that a DC circuit with negative current values is by changing the polarity of the power source or by inverting the battery, this creates that the electrons move in the opposite direction
Changing the battery also changes the direction of the power difference, since the potential from positive to negative, in most cases negative is assigned a potential of zero volts
In summary, changing the polarity or direction of the battery changes the sign of the voltage and the current
A machine has mechanical advantage 2,what does it mean?
Answer:
The mechanical advantage of a machine is 2. Mechanical advantage MA is the ratio of output (generated by the machine) force to input (applied to the machine) force. So MA = 2 means that for example if you apply 100 N then your machine will multiply that force and generate 200 N .
How much time is required for a 20 Coulombs charge to flow through a point if the current is 2 amperes? help plzzzzz
The time required for a 20 coulombs charge to flow through a point if the current is 2 amperes will be 10 seconds.
What is electric current?Electric current is defined as the ratio of the charge flow in a given time interval. It is denoted by I. It has the unit is ampere.
The given data in the problem is;
t is the time is required
q is the charge = 20 Coulombs
I is the current is= 2 amperes
The formulas for the elctric current are given as;
[tex]\rm I = \frac{q}{t} \\\\\ \rm t = \frac{q}{I} \\\\ \rm t = \frac{20}{2} \\\\ t=10 \ sec[/tex]
Hence the time required for a 20 coulombs charge to flow through a point if the current is 2 amperes will be 10 seconds.
To learn more about the electric current refer to the link;
https://brainly.com/question/2264542
The time required for a 20 coulombs charge to flow through a point if the current is 2 amperes will be 10 seconds.
What is electric current?Electric current is defined as the ratio of the charge flow in a given time interval. It is denoted by I. It has the unit is ampere.
The given data in the problem is;
t is the time is required
q is the charge = 20 Coulombs
I is the current is= 2 amperes
The formulas for the electric current are given as;
[tex]I=\dfrac{q}{t}[/tex]
[tex]t=\dfrac{q}{I}[/tex]
[tex]t=\dfrac{20}{2}[/tex]
[tex]t=10 sec[/tex]
Hence the time required for a 20 coulombs charge to flow through a point if the current is 2 amperes will be 10 seconds.
To learn more about the electric current refer to the link;
brainly.com/question/2264542
anybody got any answers???
Answer:
b? to a?
Explanation:
It converts mechanical energy to electrical.
Therefore, Option A is the correct answer
PLEASE HELP MEEEEEE
Some physical evidence was obtained from a crime scene. For which of these pieces of evidence will forensic scientists conduct an identification test?
A.
a hair strand
B.
a black powder
C.
a glove
D.
bloodstains
Answer:
The correct option is D. bloodstains
Which experimental discovery led Niels Bohr to revise Rutherford's model of
the atom?
A. Most alpha particles pass straight through a thin sheet of gold
foil.
B. Electrons have more energy the farther they are from the nucleus.
C. A few alpha particles bounce off a thin sheet of gold foil.
D. The beam in a cathode ray tube is moved by an electric force.
Answer:
Electrons have more energy the farther they are from the nucleus.
Explanation:
A P E X
Rohith has been jogging to the bus stop for 2.0 minutes at 3.5 m/s when he looks at
his watch and sees that he has plenty of time before the bus arrives. Over the next
10.0s, he slows his pace to a leisurely 0.75 m/s. What was his average acceleration
during this 10.0 s?
calculate the value of net force acting on given body?5N acting towards right & 15N force acting towards left on the brick.(draw fbd)
please help!!!!!
Answer:
-10N to the left.
Explanation:
The net force on a body is the single force that represent all the forces acting on a body.
Let the right direction be positive
Let the left direction be negative
Force acting to the right = 5N
Force acting to the left = -15N
Net force = 5N + (-15N) = -10N
The net force will be directed -10N to the left.